Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More

NCM Auctions

Category: TRUCKS, TRAILERS & VEHICLES

Total Lots: 375

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 251–300 of 375 lots

Year	Make	Model	Lot Description	Hammer Price
2004	CATERPILLAR	DP40-K	2004 CATERPILLAR DP40-K 4 TONNE DIESEL FORKLIFT, 8369 HOURS, TRIPLE MAST, FULL CAB, GOOD TYRES 2004 · CATERPILLAR · DP40-K	🔒 Subscribe
	LINDE		LINDE 12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER LINDE	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENGTH: UP TO 90MM, FASTENER TYPE: CLIPPED HEAD FRAMING NAILS, OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR, TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT), APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING SENCO · SN90CXP	🔒 Subscribe
2016	HYSTER		2016 HYSTER 5 TONNE GAS FORKLIFT, ONLY 4155 HOURS, TRIPLE MAST 2016 · HYSTER	🔒 Subscribe
	JCB	TLT TELETRUK 35D 4X4	JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR, 6059 HOURS. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL DRIVE, 6059 LOW HOURS, 360 DEGREE ROTATOR. VERY GOOD CONDITION. JCB · TLT TELETRUK 35D 4X4	🔒 Subscribe
2018	LINDE	H25D	2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WITH SIDE SHIFT, 5988 HOURS 2018 · LINDE · H25D	🔒 Subscribe
2005	DAEWOO		2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST WITH SIDE SHIFT. GOOD CONDITION ALL ROUND. 2005 · DAEWOO	🔒 Subscribe
	KALMAR		KALMAR 7 TONNE DIESEL FORKLIFT, 3.3M LIFT HEIGHT, SIDE SHIFT, FORK POSITIONER, GOOD TYRES ALL ROUND KALMAR	🔒 Subscribe
2006	HYSTER	3 TONNE	2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS 2006 · HYSTER · 3 TONNE	🔒 Subscribe
			MOTORISED ROLLER CONVEYOR - APPROXIMATE DIMENSIONS: HEIGHT - 18CM WIDTH - 69CM DEPTH - 305CM	🔒 Subscribe
1996	LINDE	H80D	1996 LINDE H80D DIESEL FORKLIFT, SIDE SHIFT, WIDE CARRIAGE (SUITABLE FOR LIFTING CONTAINERS), 2.4M FORKS, 7500 HOURS, GOOD TYRES ALL ROUND, FULL CAB 1996 · LINDE · H80D	🔒 Subscribe
		IXTRACT	IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM IXTRACT	🔒 Subscribe
	ONSRUD	INVERTED PIN ROUTER	ONSRUD INVERTED PIN ROUTER A ROBUST INDUSTRIAL WOODWORKING MACHINE WHERE THE ROUTER BIT SPINS UPWARDS FROM A TABLE, GUIDED BY A PNEUMATIC PIN THAT MOVES UP AND DOWN WITH A FOOT PEDAL, ALLOWING FOR PRECISE, REPETITIVE EDGE ROUTING OF WOOD PARTS AGAINST TEMPLATES FOR HIGH-VOLUME PRODUCTION, OFFERING CONSISTENT DEPTH CONTROL AND DUST COLLECTION FOR SAFER, EFFICIENT FURNITURE & CABINETRY MAKING. INVERTED SETUP: THE ROUTER MOTOR AND BIT ARE MOUNTED UNDERNEATH THE TABLE, WITH THE CUTTING EDGE POINTING UP PNEUMATIC PIN: A PIN, CONTROLLED BY COMPRESSED AIR AND A FOOT PEDAL MOVES VERTICALLY TEMPLATE GUIDED: THE WORKPIECE IS ROUTED AGAINST A TEMPLATE, WITH THE PIN SUPPORTING THE MATERIAL AND CONTROLLING THE CUTTING DEPTH AS THE PEDAL IS PRESSED FOOT PEDAL CONTROL: PRESSING THE PEDAL RAISES THE ROUTER BIT AND DROPS THE PIN, ALLOWING THE WORKPIECE TO BE MOVED; RELEASING THE PEDAL RETRACTS THE PIN, STOPPING THE CUT ONSRUD · INVERTED PIN ROUTER	🔒 Subscribe
			MACHINE 25 HOT WIRE STRIPE HEATER	🔒 Subscribe
			MACHINE 23 HOT WIRE STRIP HEATER	🔒 Subscribe
2018	FORD	TRANSIT LUTON VAN	2018 FORD TRANSIT LUTON VAN WHITE DIESEL 2 LITRE REVENUE WEIGHT 3500KG MOT TO 1ST OCTOBER 2026 MILEAGE 84927 2018 · FORD · TRANSIT LUTON VAN	🔒 Subscribe
2011	VOLKSWAGEN	BLUEBIRD CATERING VAN	2011 VOLKSWAGEN BLUEBIRD CATERING VAN, 138,264 MILES, DIESEL - FULLY FITTED OUT WITH: PARRY DEEP FAT FRYER, GAS CANISTERS, FLAT TOP GRIDDLE/PLANCHA, EXTRACTION CANOPY, STAINLESS STEEL WORKTOPS & PREPARATION SURFACES, GAS HOB, SINK, ROOF VENT, FOLD UP SERVING HATCH. HEIGHT 8FT 3 INCHES (2.54M), WIDTH 6FT 10 INCHES (2.08M) EXCLUDING MIRRORS, LENGTH 22FT 6 INCHES (6.85M). VRN: YX11FSJ. 2011 · VOLKSWAGEN · BLUEBIRD CATERING VAN	🔒 Subscribe
2014	COSMIC FOX	16 CNC	2014 COSMIC FOX 16 CNC SAW. APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH. IN DAILY USED AND IN GOOD WORKING ORDER. 2014 · COSMIC FOX · 16 CNC	🔒 Subscribe
2008	NIFTLIFT	HR12DE	2008 NIFTLIFT HR12DE 4 X 4 FULLY RESPRAYED 2008 · NIFTLIFT · HR12DE	🔒 Subscribe
2014	MERCEDES	SPRINTER	2014 MERCEDES SPRINTER CAMPER VAN, 141,643 MILES, MOT TO MARCH 2026. THIS SPRINTER HAS HAD A RECENT SERVICE AND MOT IS VALID UP UNTIL MARCH 2026. THIS HAS BEEN SPACIOUSLY DESIGNED FOR THOSE WHO REQUIRE THE ADDITIONAL SPACE FOR PETS OR TO ACCOMMODATE THAT ACTIVE LIFESTYLE. THIS CAMPER COMES EQUIPPED WITH A DOUBLE ROCK AND ROLL BED, TABLE, SINK AND A FRIDGE. IT HAS BEEN FULLY INSULATED AND CARPETED THROUGHOUT WITH ROOF SPOTLIGHTS. DIESEL MANUAL WHITE 3 OWNERS 2014 · MERCEDES · SPRINTER	🔒 Subscribe
2004	OMME	1750 RBD	2004 OMME 1750 RBD DUAL FUEL TRACKED SPIDER LIFT - ACCESS PLATFORM - CHERRY PICKER. 1854 HOURS. MAX WORKING HEIGHT: 57 FEET (17.7 METRES). MAX OUTREACH: 30 FEET (9.3 METRES). PLATFORM CAPACITY: 440 LBS (200 KG). PLATFORM SIZE: 4.1 FEET X 2.4 FEET (1.25M X 0.74M). STOWED DIMENSIONS: LENGTH 21.3 FEET (6.5 METRES), WIDTH 4.1 FEET (1.25 METRES), HEIGHT 6.9 FEET (2.1 METRES). WEIGHT: 4,630 LBS (2,100 KG). DUAL POWER (DIESEL AND 24V DC ELECTRIC). TRACKED CHASSIS. 360-DEGREE CONTINUOUS TURRET ROTATION. HYDRAULIC ARTICULATING JIB. HANDLES UP TO 40% GRADIENT. HYDRAULIC, MULTI-POSITION OUTRIGGERS. SAFETY FEATURES: LOAD-SENSING SYSTEM, EMERGENCY LOWERING SYSTEM, AUTOMATIC LEVELING, AND FULL HARNESS ATTACHMENT POINTS. 2004 · OMME · 1750 RBD	🔒 Subscribe
2016	NIFTY	170SD	2016 NIFTY 170SD 4 X 4 WITH OUTRIGGERS 2016 · NIFTY · 170SD	🔒 Subscribe
2016	MITSUBISHI	FG20CN	2016 MITSUBISHI FG20CN GAS FORKLIFT, 2 TONNE CAPACITY, 20150 HOURS, 4.7M TRIPLE MAST, SIDE SHIFT, SOLID TYRES 2016 · MITSUBISHI · FG20CN	🔒 Subscribe
	VOLKSWAGEN	PASSAT	2026 MOT VOLKSWAGEN PASSAT 2 LITRE DIESEL MANUAL EX TAXI DRIVES WELL 248347 MILES HALF LEATHER INTERIOR HEATED FRONT SEATS WORKING TOUCH SCREEN RADIO PARROT HAND FREE WIRED IN LAST PAS AT 247782 MILES V5 PRESENT READY TO DRIVE AWAY DOES HAVE LIGHT ON FOR AIR INTAKE SENSER DOES NOT AFFECT CAR SMALL AMOUNT OF DAMAGE ON PASSENGER REAR ARCH AND SMALL AMOUNT ON FRONT BONNET GREAT COMFORTABLE CAR VOLKSWAGEN · PASSAT	🔒 Subscribe
2004	SAMSUNG	SF30L	2004 SAMSUNG SF30L GAS FORKLIFT, 4353 HOURS, 3 TONNE LIFT, 3.3M LIFT DUPLEX MAST SOLID TYRE 2004 · SAMSUNG · SF30L	🔒 Subscribe
	CLARK	C35L	CLARK C35L COUNTERBALANCE GAS FORKLIFT, 4750 HOURS 3.5 TONNE LIFT CAPACITY DUPLEX MAST LIFT 3725MM SIDE SHIFT SOLID TYRES CLARK · C35L	🔒 Subscribe
2019	CATERPILLAR		2019 CATERPILLAR 2.5 TONNE FORKLIFT, 6M TRIPLE HEIGHT STAGE MAST, SIDE SHIFT, GAS, 13286 HOURS 2019 · CATERPILLAR	🔒 Subscribe
	LINDE	EVO	1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER SPEC MAST WITH SIDE SHIFT 5775 HOURS CONTAINER SPEC COMES COMPLETE WITH CHARGER LINDE · EVO	🔒 Subscribe
2014	TOYOTA	02-8FGJF35	2014 TOYOTA 3.5 TONNE GAS FORKLIFT, 4888 HOURS, 6M FREE LIFT MAST, SIDE SHIFT, TRUCK WEIGHT 5500KG 2014 · TOYOTA · 02-8FGJF35	🔒 Subscribe
2015	YALE	GDP35VX	2015 YALE GDP35VX 3.5 TONNE DIESEL FORKLIFT WITH 1220MM SS CRG AND 1200MM FORKS, TRUCK WEIGHT: 5170KG, BACK TILT: 5 DEGREES, MAXIMUM CAPACITY: 2300KG, MAX LOAD HEIGHT 5815KG, NOMINAL POWER: 34.2KW, 5815MM TRIPLE MAST WITH SIDE SHIFT. 8074 HOURS 2015 · YALE · GDP35VX	🔒 Subscribe
	CONQUIP	CA108-01000	1000 LITRE BOAT SKIP WORKING LOAD LIMIT: 2000KG WEIGHT: 252 KG CAPACITY: 1000 LITRE CONQUIP · CA108-01000	🔒 Subscribe
	EVOLUTION	S355	EVOLUTION S355 METAL CUTTING CHOPSAW, 240 VOLTS, SPARES OR REPAIRS DUE TO FAULTY GUARD EVOLUTION · S355	🔒 Subscribe
2017	HYSTER	H25	2017 HYSTER H25 2.5 TONNE FORKLIFT, 9167 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT & FORK POSITIONS 2017 · HYSTER · H25	🔒 Subscribe
	NEWARC	VIPER 2500S	NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SOURCE, NO LEADS INCLUDED. NEWARC · VIPER 2500S	🔒 Subscribe
	RENAULT		RENAULT VAN SHOWING 229,304 MILES * HAS 2 SIDE DOORS * CHECK INJECTION CHECK ANTI POLLUTION SYSTEM ENGINE WARNING LIGHT ON SERVICE LIGHT ON RENAULT	🔒 Subscribe
	CATERPILLAR		2.5 TONNE GAS FORKLIFT, TRIPLE MAST 5.5M MAST WITH SIDE SHIFT LOW HOURS OUTSTANDING CONDITION ALL ROUND CATERPILLAR	🔒 Subscribe
2013	DOOSAN		2013 DOOSAN 1.5 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, TRIPLE MAST WITH SIDE SHIFT. 1.5 TONNE LIFT, GOOD BATTERY, COMPLETE WITH CHARGER. S/N: 150725 2013 · DOOSAN	🔒 Subscribe
2016	HYSTER	H30	2016 HYSTER H30 3 TONNE FORKLIFT, 8615 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT 2016 · HYSTER · H30	🔒 Subscribe
	HSM	V-PRESS 610	HSM V-PRESS 610 VERTICAL BALER PRESS REDUCES THE VOLUME OF CARDBOARD AND PLASTIC FILM IN AN ECONOMICAL WAY LOW INSTALLATION HEIGHT AND SMALL FOOTPRINT SPECIAL RETAINING CLAWS OPTIMISE THE COMPRESSION OF THE PRESSING MATERIAL, INCREASING BOTH THE LOADING VOLUME AND BALE OUTPUT QUICK AND EASY PRESS ASSEMBLY MECHANICAL BALE EJECTOR HIGH PROCESS RELIABILITY DUE TO HSM TCS (TORSION CONTROL SYSTEM) CONFIGURATION - ECO - DOUBLE DOOR WITH HAND WHEEL DOOR LOCK PRESSING POWER. - 120KN 3KW MOTOR VOLTAGE - 3 X 400V/50HZ LOADING APERTURE (W X H) IN MM - 800 X 495 BALE WEIGHT ON KG (DEPENDING ON MATERIAL) - UP TO 100KG BALE SIZE (L X W X H) IN MM - 800 X 600 X MAX 600 CYCLE TIME IN IDLE OPERATION IN SEC - 22 PRESS CHAMBER SIZE (W X D X H) IN MM - 800 X 600 X 1045 DIMENSIONS OF MACHINE (W X D X H) IN MM - 1198 X 823 X 1986 MACHINE WEIGHT IN KG - 540KG STRAPPING - 3 FOLD POLYESTER TAPE HSM · V-PRESS 610	🔒 Subscribe
	PROBST	53100200	PROBST SCISSOR GRAB WEIGHT: 210 KG CARRYING CAPACITY: 1800KG GRIPPING RANGE: 400 TO 1100MM INSIDE HEIGHT: 800MM GRIPPER LENGTH: 1200MM PROBST · 53100200	🔒 Subscribe
	IVITI	CR2 HB-39-IP	IVITI CR2 HANGING BRACKET, MODEL HB-39-IP E39 BASE, 240V, 150W MAX. SINGLE ITEM PER BOX, 10 BOXES. UNUSED, IN BOXES. IVITI · CR2 HB-39-IP	🔒 Subscribe
2017	LINDE	H35-D	2017 LINDE H35-D FORKLIFT 5M LIFT HEIGHT DOUBLE PALLET HANDLER WITH SIDE SHIFT 3.5 TONNE LIFT CAPACITY 7340 HOURS DIESEL S/N: 2017 · LINDE · H35-D	🔒 Subscribe
			10 X WELDMESH 8FT X 4FT MESH, 1IN X 1IN, UNGALVANIZED	🔒 Subscribe
2015	SCANIA	P410 TIPPER 8 X 4	2015 SCANIA P410 TIPPER 8 X 4 WHEEL DIESEL MOT VALID UNTIL 31/12/25. APPROXIMATELY 433,000 KM'S / 269,000 MILES. 2015 · SCANIA · P410 TIPPER 8 X 4	🔒 Subscribe
	ROSAND	RH10	ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO NOW OWN ROSAND UNUSED FOR 5 YEARS AND BEEN IN LONG TERM STORAGE SINCE THEN, BUT WAS OPERATION PRIOR TO THIS POWERS UP CURRENTLY ROSAND · RH10	🔒 Subscribe
1996	ATLAS	1604	1996 ATLAS 1604 SCRAP HANDLER, 14,900 HOURS - HIGH CAB SCRAP HANDLER WITH HIGH CAB, LONG ARM, GOOD TRACKS AND 5 TINE GRAB 1996 · ATLAS · 1604	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING. SENCO · SN90CXP	🔒 Subscribe
	PFEIFER DRAKO LTD	6X36WS-WC	60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG PFEIFER DRAKO LTD · 6X36WS-WC	🔒 Subscribe
2018	CATERPILLAR	2.5 TONNE LIFT	2018 CATERPILLAR 2.5 TONNE LIFT, 4.7M TRIPLE MAST, CONTAINER MAST SIDE SHIFT, GAS, 8073 HOURS 2018 · CATERPILLAR · 2.5 TONNE LIFT	🔒 Subscribe
	INSTRON	3520	2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM DONALDSON CHILLER INCLUDED INSTRON · 3520	🔒 Subscribe

Year	Make	Model	Description	Price
2004	CATERPILLAR	DP40-K	2004 CATERPILLAR DP40-K 4 TONNE DIESEL FORKLIFT, 8369 HOURS, TRIPLE MAST, FULL CAB, GOOD TYRES	🔒 Subscribe
	LINDE		LINDE 12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENGTH: UP TO 90MM, FASTENER TYPE: CLIPPED HEAD FRAMING NAILS, OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR, TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT), APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING	🔒 Subscribe
2016	HYSTER		2016 HYSTER 5 TONNE GAS FORKLIFT, ONLY 4155 HOURS, TRIPLE MAST	🔒 Subscribe
	JCB	TLT TELETRUK 35D 4X4	JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR, 6059 HOURS. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL DRIVE, 6059 LOW HOURS, 360 DEGREE ROTATOR. VERY GOOD CONDITION.	🔒 Subscribe
2018	LINDE	H25D	2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WITH SIDE SHIFT, 5988 HOURS	🔒 Subscribe
2005	DAEWOO		2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST WITH SIDE SHIFT. GOOD CONDITION ALL ROUND.	🔒 Subscribe
	KALMAR		KALMAR 7 TONNE DIESEL FORKLIFT, 3.3M LIFT HEIGHT, SIDE SHIFT, FORK POSITIONER, GOOD TYRES ALL ROUND	🔒 Subscribe
2006	HYSTER	3 TONNE	2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS	🔒 Subscribe
			MOTORISED ROLLER CONVEYOR - APPROXIMATE DIMENSIONS: HEIGHT - 18CM WIDTH - 69CM DEPTH - 305CM	🔒 Subscribe
1996	LINDE	H80D	1996 LINDE H80D DIESEL FORKLIFT, SIDE SHIFT, WIDE CARRIAGE (SUITABLE FOR LIFTING CONTAINERS), 2.4M FORKS, 7500 HOURS, GOOD TYRES ALL ROUND, FULL CAB	🔒 Subscribe
		IXTRACT	IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM	🔒 Subscribe
	ONSRUD	INVERTED PIN ROUTER	ONSRUD INVERTED PIN ROUTER A ROBUST INDUSTRIAL WOODWORKING MACHINE WHERE THE ROUTER BIT SPINS UPWARDS FROM A TABLE, GUIDED BY A PNEUMATIC PIN THAT MOVES UP AND DOWN WITH A FOOT PEDAL, ALLOWING FOR PRECISE, REPETITIVE EDGE ROUTING OF WOOD PARTS AGAINST TEMPLATES FOR HIGH-VOLUME PRODUCTION, OFFERING CONSISTENT DEPTH CONTROL AND DUST COLLECTION FOR SAFER, EFFICIENT FURNITURE & CABINETRY MAKING. INVERTED SETUP: THE ROUTER MOTOR AND BIT ARE MOUNTED UNDERNEATH THE TABLE, WITH THE CUTTING EDGE POINTING UP PNEUMATIC PIN: A PIN, CONTROLLED BY COMPRESSED AIR AND A FOOT PEDAL MOVES VERTICALLY TEMPLATE GUIDED: THE WORKPIECE IS ROUTED AGAINST A TEMPLATE, WITH THE PIN SUPPORTING THE MATERIAL AND CONTROLLING THE CUTTING DEPTH AS THE PEDAL IS PRESSED FOOT PEDAL CONTROL: PRESSING THE PEDAL RAISES THE ROUTER BIT AND DROPS THE PIN, ALLOWING THE WORKPIECE TO BE MOVED; RELEASING THE PEDAL RETRACTS THE PIN, STOPPING THE CUT	🔒 Subscribe
			MACHINE 25 HOT WIRE STRIPE HEATER	🔒 Subscribe
			MACHINE 23 HOT WIRE STRIP HEATER	🔒 Subscribe
2018	FORD	TRANSIT LUTON VAN	2018 FORD TRANSIT LUTON VAN WHITE DIESEL 2 LITRE REVENUE WEIGHT 3500KG MOT TO 1ST OCTOBER 2026 MILEAGE 84927	🔒 Subscribe
2011	VOLKSWAGEN	BLUEBIRD CATERING VAN	2011 VOLKSWAGEN BLUEBIRD CATERING VAN, 138,264 MILES, DIESEL - FULLY FITTED OUT WITH: PARRY DEEP FAT FRYER, GAS CANISTERS, FLAT TOP GRIDDLE/PLANCHA, EXTRACTION CANOPY, STAINLESS STEEL WORKTOPS & PREPARATION SURFACES, GAS HOB, SINK, ROOF VENT, FOLD UP SERVING HATCH. HEIGHT 8FT 3 INCHES (2.54M), WIDTH 6FT 10 INCHES (2.08M) EXCLUDING MIRRORS, LENGTH 22FT 6 INCHES (6.85M). VRN: YX11FSJ.	🔒 Subscribe
2014	COSMIC FOX	16 CNC	2014 COSMIC FOX 16 CNC SAW. APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH. IN DAILY USED AND IN GOOD WORKING ORDER.	🔒 Subscribe
2008	NIFTLIFT	HR12DE	2008 NIFTLIFT HR12DE 4 X 4 FULLY RESPRAYED	🔒 Subscribe
2014	MERCEDES	SPRINTER	2014 MERCEDES SPRINTER CAMPER VAN, 141,643 MILES, MOT TO MARCH 2026. THIS SPRINTER HAS HAD A RECENT SERVICE AND MOT IS VALID UP UNTIL MARCH 2026. THIS HAS BEEN SPACIOUSLY DESIGNED FOR THOSE WHO REQUIRE THE ADDITIONAL SPACE FOR PETS OR TO ACCOMMODATE THAT ACTIVE LIFESTYLE. THIS CAMPER COMES EQUIPPED WITH A DOUBLE ROCK AND ROLL BED, TABLE, SINK AND A FRIDGE. IT HAS BEEN FULLY INSULATED AND CARPETED THROUGHOUT WITH ROOF SPOTLIGHTS. DIESEL MANUAL WHITE 3 OWNERS	🔒 Subscribe
2004	OMME	1750 RBD	2004 OMME 1750 RBD DUAL FUEL TRACKED SPIDER LIFT - ACCESS PLATFORM - CHERRY PICKER. 1854 HOURS. MAX WORKING HEIGHT: 57 FEET (17.7 METRES). MAX OUTREACH: 30 FEET (9.3 METRES). PLATFORM CAPACITY: 440 LBS (200 KG). PLATFORM SIZE: 4.1 FEET X 2.4 FEET (1.25M X 0.74M). STOWED DIMENSIONS: LENGTH 21.3 FEET (6.5 METRES), WIDTH 4.1 FEET (1.25 METRES), HEIGHT 6.9 FEET (2.1 METRES). WEIGHT: 4,630 LBS (2,100 KG). DUAL POWER (DIESEL AND 24V DC ELECTRIC). TRACKED CHASSIS. 360-DEGREE CONTINUOUS TURRET ROTATION. HYDRAULIC ARTICULATING JIB. HANDLES UP TO 40% GRADIENT. HYDRAULIC, MULTI-POSITION OUTRIGGERS. SAFETY FEATURES: LOAD-SENSING SYSTEM, EMERGENCY LOWERING SYSTEM, AUTOMATIC LEVELING, AND FULL HARNESS ATTACHMENT POINTS.	🔒 Subscribe
2016	NIFTY	170SD	2016 NIFTY 170SD 4 X 4 WITH OUTRIGGERS	🔒 Subscribe
2016	MITSUBISHI	FG20CN	2016 MITSUBISHI FG20CN GAS FORKLIFT, 2 TONNE CAPACITY, 20150 HOURS, 4.7M TRIPLE MAST, SIDE SHIFT, SOLID TYRES	🔒 Subscribe
	VOLKSWAGEN	PASSAT	2026 MOT VOLKSWAGEN PASSAT 2 LITRE DIESEL MANUAL EX TAXI DRIVES WELL 248347 MILES HALF LEATHER INTERIOR HEATED FRONT SEATS WORKING TOUCH SCREEN RADIO PARROT HAND FREE WIRED IN LAST PAS AT 247782 MILES V5 PRESENT READY TO DRIVE AWAY DOES HAVE LIGHT ON FOR AIR INTAKE SENSER DOES NOT AFFECT CAR SMALL AMOUNT OF DAMAGE ON PASSENGER REAR ARCH AND SMALL AMOUNT ON FRONT BONNET GREAT COMFORTABLE CAR	🔒 Subscribe
2004	SAMSUNG	SF30L	2004 SAMSUNG SF30L GAS FORKLIFT, 4353 HOURS, 3 TONNE LIFT, 3.3M LIFT DUPLEX MAST SOLID TYRE	🔒 Subscribe
	CLARK	C35L	CLARK C35L COUNTERBALANCE GAS FORKLIFT, 4750 HOURS 3.5 TONNE LIFT CAPACITY DUPLEX MAST LIFT 3725MM SIDE SHIFT SOLID TYRES	🔒 Subscribe
2019	CATERPILLAR		2019 CATERPILLAR 2.5 TONNE FORKLIFT, 6M TRIPLE HEIGHT STAGE MAST, SIDE SHIFT, GAS, 13286 HOURS	🔒 Subscribe
	LINDE	EVO	1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER SPEC MAST WITH SIDE SHIFT 5775 HOURS CONTAINER SPEC COMES COMPLETE WITH CHARGER	🔒 Subscribe
2014	TOYOTA	02-8FGJF35	2014 TOYOTA 3.5 TONNE GAS FORKLIFT, 4888 HOURS, 6M FREE LIFT MAST, SIDE SHIFT, TRUCK WEIGHT 5500KG	🔒 Subscribe
2015	YALE	GDP35VX	2015 YALE GDP35VX 3.5 TONNE DIESEL FORKLIFT WITH 1220MM SS CRG AND 1200MM FORKS, TRUCK WEIGHT: 5170KG, BACK TILT: 5 DEGREES, MAXIMUM CAPACITY: 2300KG, MAX LOAD HEIGHT 5815KG, NOMINAL POWER: 34.2KW, 5815MM TRIPLE MAST WITH SIDE SHIFT. 8074 HOURS	🔒 Subscribe
	CONQUIP	CA108-01000	1000 LITRE BOAT SKIP WORKING LOAD LIMIT: 2000KG WEIGHT: 252 KG CAPACITY: 1000 LITRE	🔒 Subscribe
	EVOLUTION	S355	EVOLUTION S355 METAL CUTTING CHOPSAW, 240 VOLTS, SPARES OR REPAIRS DUE TO FAULTY GUARD	🔒 Subscribe
2017	HYSTER	H25	2017 HYSTER H25 2.5 TONNE FORKLIFT, 9167 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT & FORK POSITIONS	🔒 Subscribe
	NEWARC	VIPER 2500S	NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SOURCE, NO LEADS INCLUDED.	🔒 Subscribe
	RENAULT		RENAULT VAN SHOWING 229,304 MILES * HAS 2 SIDE DOORS * CHECK INJECTION CHECK ANTI POLLUTION SYSTEM ENGINE WARNING LIGHT ON SERVICE LIGHT ON	🔒 Subscribe
	CATERPILLAR		2.5 TONNE GAS FORKLIFT, TRIPLE MAST 5.5M MAST WITH SIDE SHIFT LOW HOURS OUTSTANDING CONDITION ALL ROUND	🔒 Subscribe
2013	DOOSAN		2013 DOOSAN 1.5 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, TRIPLE MAST WITH SIDE SHIFT. 1.5 TONNE LIFT, GOOD BATTERY, COMPLETE WITH CHARGER. S/N: 150725	🔒 Subscribe
2016	HYSTER	H30	2016 HYSTER H30 3 TONNE FORKLIFT, 8615 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT	🔒 Subscribe
	HSM	V-PRESS 610	HSM V-PRESS 610 VERTICAL BALER PRESS REDUCES THE VOLUME OF CARDBOARD AND PLASTIC FILM IN AN ECONOMICAL WAY LOW INSTALLATION HEIGHT AND SMALL FOOTPRINT SPECIAL RETAINING CLAWS OPTIMISE THE COMPRESSION OF THE PRESSING MATERIAL, INCREASING BOTH THE LOADING VOLUME AND BALE OUTPUT QUICK AND EASY PRESS ASSEMBLY MECHANICAL BALE EJECTOR HIGH PROCESS RELIABILITY DUE TO HSM TCS (TORSION CONTROL SYSTEM) CONFIGURATION - ECO - DOUBLE DOOR WITH HAND WHEEL DOOR LOCK PRESSING POWER. - 120KN 3KW MOTOR VOLTAGE - 3 X 400V/50HZ LOADING APERTURE (W X H) IN MM - 800 X 495 BALE WEIGHT ON KG (DEPENDING ON MATERIAL) - UP TO 100KG BALE SIZE (L X W X H) IN MM - 800 X 600 X MAX 600 CYCLE TIME IN IDLE OPERATION IN SEC - 22 PRESS CHAMBER SIZE (W X D X H) IN MM - 800 X 600 X 1045 DIMENSIONS OF MACHINE (W X D X H) IN MM - 1198 X 823 X 1986 MACHINE WEIGHT IN KG - 540KG STRAPPING - 3 FOLD POLYESTER TAPE	🔒 Subscribe
	PROBST	53100200	PROBST SCISSOR GRAB WEIGHT: 210 KG CARRYING CAPACITY: 1800KG GRIPPING RANGE: 400 TO 1100MM INSIDE HEIGHT: 800MM GRIPPER LENGTH: 1200MM	🔒 Subscribe
	IVITI	CR2 HB-39-IP	IVITI CR2 HANGING BRACKET, MODEL HB-39-IP E39 BASE, 240V, 150W MAX. SINGLE ITEM PER BOX, 10 BOXES. UNUSED, IN BOXES.	🔒 Subscribe
2017	LINDE	H35-D	2017 LINDE H35-D FORKLIFT 5M LIFT HEIGHT DOUBLE PALLET HANDLER WITH SIDE SHIFT 3.5 TONNE LIFT CAPACITY 7340 HOURS DIESEL S/N:	🔒 Subscribe
			10 X WELDMESH 8FT X 4FT MESH, 1IN X 1IN, UNGALVANIZED	🔒 Subscribe
2015	SCANIA	P410 TIPPER 8 X 4	2015 SCANIA P410 TIPPER 8 X 4 WHEEL DIESEL MOT VALID UNTIL 31/12/25. APPROXIMATELY 433,000 KM'S / 269,000 MILES.	🔒 Subscribe
	ROSAND	RH10	ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO NOW OWN ROSAND UNUSED FOR 5 YEARS AND BEEN IN LONG TERM STORAGE SINCE THEN, BUT WAS OPERATION PRIOR TO THIS POWERS UP CURRENTLY	🔒 Subscribe
1996	ATLAS	1604	1996 ATLAS 1604 SCRAP HANDLER, 14,900 HOURS - HIGH CAB SCRAP HANDLER WITH HIGH CAB, LONG ARM, GOOD TRACKS AND 5 TINE GRAB	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING.	🔒 Subscribe
	PFEIFER DRAKO LTD	6X36WS-WC	60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG	🔒 Subscribe
2018	CATERPILLAR	2.5 TONNE LIFT	2018 CATERPILLAR 2.5 TONNE LIFT, 4.7M TRIPLE MAST, CONTAINER MAST SIDE SHIFT, GAS, 8073 HOURS	🔒 Subscribe
	INSTRON	3520	2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM DONALDSON CHILLER INCLUDED	🔒 Subscribe

2004 CATERPILLAR DP40-K

2004 CATERPILLAR DP40-K 4 TONNE DIESEL FORKLIFT, 8369 HOURS, TRIPLE MAST, FULL CAB, GOOD TYRES...

LINDE

LINDE 12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER...

SENCO SN90CXP

SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENG...

2016 HYSTER

2016 HYSTER 5 TONNE GAS FORKLIFT, ONLY 4155 HOURS, TRIPLE MAST...

JCB TLT TELETRUK 35D 4X4

JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR, 6059 HOURS. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL ...

2018 LINDE H25D

2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WIT...

2005 DAEWOO

2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST ...

KALMAR

KALMAR 7 TONNE DIESEL FORKLIFT, 3.3M LIFT HEIGHT, SIDE SHIFT, FORK POSITIONER, GOOD TYRES ALL ROUND...

2006 HYSTER 3 TONNE

2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS...

MOTORISED ROLLER CONVEYOR - APPROXIMATE DIMENSIONS: HEIGHT - 18CM WIDTH - 69CM DEPTH - 305CM

1996 LINDE H80D

1996 LINDE H80D DIESEL FORKLIFT, SIDE SHIFT, WIDE CARRIAGE (SUITABLE FOR LIFTING CONTAINERS), 2.4M F...

IXTRACT

IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM...

ONSRUD INVERTED PIN ROUTER

ONSRUD INVERTED PIN ROUTER A ROBUST INDUSTRIAL WOODWORKING MACHINE WHERE THE ROUTER BIT SPINS UPWARD...

MACHINE 25 HOT WIRE STRIPE HEATER

MACHINE 23 HOT WIRE STRIP HEATER

2018 FORD TRANSIT LUTON VAN

2018 FORD TRANSIT LUTON VAN WHITE DIESEL 2 LITRE REVENUE WEIGHT 3500KG MOT TO 1ST OCTOBER 2026 MILEA...

2011 VOLKSWAGEN BLUEBIRD CATERING VAN

2011 VOLKSWAGEN BLUEBIRD CATERING VAN, 138,264 MILES, DIESEL - FULLY FITTED OUT WITH: PARRY DEEP FAT...

2014 COSMIC FOX 16 CNC

2014 COSMIC FOX 16 CNC SAW. APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH. IN DAI...

2008 NIFTLIFT HR12DE

2008 NIFTLIFT HR12DE 4 X 4 FULLY RESPRAYED...

2014 MERCEDES SPRINTER

2014 MERCEDES SPRINTER CAMPER VAN, 141,643 MILES, MOT TO MARCH 2026. THIS SPRINTER HAS HAD A RECENT ...

2004 OMME 1750 RBD

2004 OMME 1750 RBD DUAL FUEL TRACKED SPIDER LIFT - ACCESS PLATFORM - CHERRY PICKER. 1854 HOURS. MAX ...

2016 NIFTY 170SD

2016 NIFTY 170SD 4 X 4 WITH OUTRIGGERS...

2016 MITSUBISHI FG20CN

2016 MITSUBISHI FG20CN GAS FORKLIFT, 2 TONNE CAPACITY, 20150 HOURS, 4.7M TRIPLE MAST, SIDE SHIFT, SO...

VOLKSWAGEN PASSAT

2026 MOT VOLKSWAGEN PASSAT 2 LITRE DIESEL MANUAL EX TAXI DRIVES WELL 248347 MILES HALF LEATHER INTER...

2004 SAMSUNG SF30L

2004 SAMSUNG SF30L GAS FORKLIFT, 4353 HOURS, 3 TONNE LIFT, 3.3M LIFT DUPLEX MAST SOLID TYRE...

CLARK C35L

CLARK C35L COUNTERBALANCE GAS FORKLIFT, 4750 HOURS 3.5 TONNE LIFT CAPACITY DUPLEX MAST LIFT 3725MM S...

2019 CATERPILLAR

2019 CATERPILLAR 2.5 TONNE FORKLIFT, 6M TRIPLE HEIGHT STAGE MAST, SIDE SHIFT, GAS, 13286 HOURS...

LINDE EVO

1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER SPEC MAST WITH SIDE SHIFT 5775 HOURS CONTAINER SPEC COMES...

2014 TOYOTA 02-8FGJF35

2014 TOYOTA 3.5 TONNE GAS FORKLIFT, 4888 HOURS, 6M FREE LIFT MAST, SIDE SHIFT, TRUCK WEIGHT 5500KG...

2015 YALE GDP35VX

2015 YALE GDP35VX 3.5 TONNE DIESEL FORKLIFT WITH 1220MM SS CRG AND 1200MM FORKS, TRUCK WEIGHT: 5170K...

CONQUIP CA108-01000

1000 LITRE BOAT SKIP WORKING LOAD LIMIT: 2000KG WEIGHT: 252 KG CAPACITY: 1000 LITRE...

EVOLUTION S355

EVOLUTION S355 METAL CUTTING CHOPSAW, 240 VOLTS, SPARES OR REPAIRS DUE TO FAULTY GUARD...

2017 HYSTER H25

2017 HYSTER H25 2.5 TONNE FORKLIFT, 9167 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT & FORK POSITION...

NEWARC VIPER 2500S

NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SO...

RENAULT

RENAULT VAN SHOWING 229,304 MILES * HAS 2 SIDE DOORS * CHECK INJECTION CHECK ANTI POLLUTION SYSTEM E...

CATERPILLAR

2.5 TONNE GAS FORKLIFT, TRIPLE MAST 5.5M MAST WITH SIDE SHIFT LOW HOURS OUTSTANDING CONDITION ALL RO...

2013 DOOSAN

2013 DOOSAN 1.5 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, TRIPLE MAST WITH SIDE SHIFT. 1.5 TONNE LIFT...

2016 HYSTER H30

2016 HYSTER H30 3 TONNE FORKLIFT, 8615 HOURS, 4.7M CONTAINER SPEC MAST, SIDE SHIFT...

HSM V-PRESS 610

HSM V-PRESS 610 VERTICAL BALER PRESS REDUCES THE VOLUME OF CARDBOARD AND PLASTIC FILM IN AN ECONOMIC...

PROBST 53100200

PROBST SCISSOR GRAB WEIGHT: 210 KG CARRYING CAPACITY: 1800KG GRIPPING RANGE: 400 TO 1100MM INSIDE HE...

IVITI CR2 HB-39-IP

IVITI CR2 HANGING BRACKET, MODEL HB-39-IP E39 BASE, 240V, 150W MAX. SINGLE ITEM PER BOX, 10 BOXES. U...

2017 LINDE H35-D

2017 LINDE H35-D FORKLIFT 5M LIFT HEIGHT DOUBLE PALLET HANDLER WITH SIDE SHIFT 3.5 TONNE LIFT CAPACI...

10 X WELDMESH 8FT X 4FT MESH, 1IN X 1IN, UNGALVANIZED

2015 SCANIA P410 TIPPER 8 X 4

2015 SCANIA P410 TIPPER 8 X 4 WHEEL DIESEL MOT VALID UNTIL 31/12/25. APPROXIMATELY 433,000 KM'S / 26...

ROSAND RH10

ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO N...

1996 ATLAS 1604

1996 ATLAS 1604 SCRAP HANDLER, 14,900 HOURS - HIGH CAB SCRAP HANDLER WITH HIGH CAB, LONG ARM, GOOD T...

SENCO SN90CXP

SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: ...

PFEIFER DRAKO LTD 6X36WS-WC

60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG...

2018 CATERPILLAR 2.5 TONNE LIFT

2018 CATERPILLAR 2.5 TONNE LIFT, 4.7M TRIPLE MAST, CONTAINER MAST SIDE SHIFT, GAS, 8073 HOURS...

INSTRON 3520

2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 35...

<< Previous 4 5 6 7 8 Next >>

Recent Searches

Login

Reset Password

Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More

Save to Project Folder

Print Options

Unlock Unlimited Printing