Village Automatics Complete Liquidation Screw Machine and CNC Machine Shop
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
483
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
1997 | AMERA SEIKI | TC-2L |
1997 AMERA SEIKI TC-2L LATHE. CHUCK SIZE 8 INCH, BAR CAPACITY 2 INCH, AXIS 2, POWER 20 HP, MAX RPM 6000 RPM, TURNING DIA 13 INCH, SWING 16 INCH, UPPER 62, MACHINING LENGTH 21 INCH, TAILSTOCK YES, DIMENSIONS 90 INCH X 60 INCH, WEIGHT 8,800 LBS. S/N: 78557
|
🔒 Subscribe |
|
|
2002 | MAZAK | PFH-4800 |
2002 MAZAK PFH-4800 MACHINING CENTER. MACHINE WEIGHT 21,780LBS. DUAL PALLET SHUTTLE SYSTEM. 30HP SPINDLE MOTOR. 12,000RPM SPINDLE FUSION 640M CONTROLS S/N: 162398. UNIT HAS BEEN POWERED DOWN SINCE EARLY 2020. BECAUSE OF THIS, IT WILL NEED PARAMETERS RE-INSTALLED. OTHERWISE, UNIT WAS PERFORMING AS IT SHOULD PRIOR TO SHUT DOWN. SELLER WAS QUOTED $2500 TO REINSTALL PARAMETERS FROM A BACK UP.
|
🔒 Subscribe |
|
|
OKUMA | LNC8 |
OKUMA LNC8 CNC LATHE. VOLTAGE 220/480V 3 PHASE. SWING OVER BED: 15.75" MAXIMUM TURNING DIAMETER: 9.84" MAXIMUM WORK LENGTH: 19.7" BAR DIAMETER: 1.77" SPINDLE SPEED RANGE: 75 - 4,200 RPM RAPID TRAVERSE (X,Z): 472 IPM X-AXIS TRAVEL: 6.89" Z-AXIS TRAVEL: 20.47" TURRET POSITIONS: 12 SPINDLE MOTOR: 10 HP EQUIPPED WITH: OKUMA OSP5020L CNC CONTROL AUTOMATIC LUBE SYSTEM CHIP CONVEYOR S/N: D220
|
🔒 Subscribe | |
|
|
FADAL | VMC4020HT |
FADAL VMC4020HT VERTICAL MACHINING CENTER. FADAL CNC88 CONTROLS. SPECS: X AXIS TRAVEL: 40 " Y AXIS TRAVEL: 20 " Z AXIS TRAVEL: 28 " RAPID RATE X AXIS: 787 IPM RAPID RATE Y AXIS: 787 IPM RAPID RATE Z AXIS: 787 IPM TABLE SIZE: 48" X 20" MAX TABLE LOAD: 1000 LBS SPINDLE MOTOR: 22.5 HP SPINDLE SPEED: 10000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 30 + 1 ATC TOOL CHANGER STYLE: UMBRELLA DIMENSIONS: 116" X 87" X 104" WEIGHT: 13000 LBS SERIAL NUMBER 5006301.
|
🔒 Subscribe | |
|
|
ASSORTED SCRAP MACHINES.
|
🔒 Subscribe | |||
|
|
SHELDON | 15 |
SHELDON 15 LATHE. 15" X 40". INCLUDES 2 CHUCKS. TOOL POST HOLDER NOT INCLUDED.
|
🔒 Subscribe | |
|
|
CLARK | GCS25WC |
CLARK GCS25WC 5000LB PROPANE FORKLIFT. 188IN LIFT ON MAST. 6833HRS SHOWING. S/N: G138WC-0055-5513FA. UNIT RUNS AND DRIVES BUT DOES SMOKE HEAVILY. TANK NOT INCLUDED.
|
🔒 Subscribe | |
|
|
DOALL | C-912A |
DOALL C-912A HORIZONTAL AUTOMATIC BAND SAW. S/N: 368-79261 CAPACITY 9 H X 12 W BLADE SIZE 1 X 146-148 BLADE SPEED VARIABLE (VARIABLE) 60-360 FPM DIMENSIONS 7L X 6W X 3H MAIN MOTOR 3 HP 240V 3PH WEIGHT 2,700 LBS
|
🔒 Subscribe | |
|
|
1998 | AMERA-SEIKI | GT-32 |
1998 AMERA-SEIKI GT-32 CNC LATHE. SWING OVER SLIDE COVER - 10.8" SPINDLE SPEED RANGE - ( STEPLESS ) - 60 TO 6000 RPM GANG TOOL SLIDE WIDTH X LENGTH - 12" X 20.8" RAPID TRAVERSE RATE - ( X AXIS ) - 590 IPM RAPID TRAVERSE RATE - ( Z AXIS ) - 590 IPM SPINDLE DRIVE MOTOR - 10 HP A.C. FANUC OTC CNC CONTROL, 6" 3 JAW HYDRAULIC CHUCK COLLET CHUCK USING 5C COLLETS, COOLANT SYSTEM S/N: 81424
|
🔒 Subscribe |
|
|
1998 | AMERA-SEIKI | GT-32 |
1998 AMERA-SEIKI GT-32 CNC LATHE. SWING OVER SLIDE COVER - 10.8" SPINDLE SPEED RANGE - ( STEPLESS ) - 60 TO 6000 RPM GANG TOOL SLIDE WIDTH X LENGTH - 12" X 20.8" RAPID TRAVERSE RATE - ( X AXIS ) - 590 IPM RAPID TRAVERSE RATE - ( Z AXIS ) - 590 IPM SPINDLE DRIVE MOTOR - 10 HP A.C. FANUC OTC CNC CONTROL, 6" 3 JAW HYDRAULIC CHUCK COLLET CHUCK USING 5C COLLETS, COOLANT SYSTEM S/N: 81428
|
🔒 Subscribe |
|
|
TOLHURST |
OILY CHIP WRINGER SYSTEM. UNMARKED BUT APPEARS TO BE TOLHURST BRAND OR SIMILAR.
|
🔒 Subscribe | ||
|
|
MICRO-VU | EDGE DETECTOR ED-50 |
MICRO-VU EDGE DETECTOR ED-50 OPTICAL COMPARATOR
|
🔒 Subscribe | |
|
|
STANLEY VIDMAR |
14 DRAWER STANLEY VIDMAR 59 TALL X 30W X 28D. INCLUDES CONTENTS.
|
🔒 Subscribe | ||
|
|
STANLEY VIDMAR |
13 DRAWER STANLEY VIDMAR 44 TALL X 30W X 28D. CONTENTS NOT INCLUDED.
|
🔒 Subscribe | ||
|
|
STANLEY VIDMAR |
14 DRAWER STANLEY VIDMAR 59 TALL X 30W X 28D. INCLUDES CONTENTS.
|
🔒 Subscribe | ||
|
|
BIN OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
LARGE ASSORTMENT OF STEEL STOCK WITH RACK.
|
🔒 Subscribe | |||
|
|
KAESER | AS31 |
25HP KAESER AS31 ROTARY SCREW AIR COMPRESSOR. 109CFM. 60,144 HRS SHOWING. UNIT WAS FUNCTIONAL PRIOR TO CLOSURE.
|
🔒 Subscribe | |
|
|
RAMCO | RP-50 |
50 TON RAMCO RP-50 H-FRAME PRESS.
|
🔒 Subscribe | |
|
|
NU-ERA | 46 |
11 DRAWER NU-ERA 46 TALL X 30W X 28D. INCLUDES CONTENTS.
|
🔒 Subscribe | |
|
|
BIN OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
LARGE QTY OF BRASS BUSHINGS.
|
🔒 Subscribe | |||
|
|
BROWN AND SHARPE |
BROWN AND SHARPE AUTOMATIC SCREW MACHINE.
|
🔒 Subscribe | ||
|
|
WILTON | 4300A |
WILTON 4300A COMBINATION BELT AND DISC SANDER. 115V SINGLE PHASE.
|
🔒 Subscribe | |
|
|
WESTBURY |
WESTBURY KNEE MILL. 9IN X 48IN TABLE. INCLUDES VISE.
|
🔒 Subscribe | ||
|
|
QTY 3 - BINS OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
ACME GRIDLEY | 1-1/4" RA6 |
ACME GRIDLEY 1-1/4" RA6 AUTOMATIC SCREW MACHINE. 6 SPINDLE.
|
🔒 Subscribe | |
|
|
ACME GRIDLEY |
ACME GRIDLEY AUTOMATIC SCREW MACHINE. 6 SPINDLE. UNIT WAS SAID TO ME RUNNING MACHINE PRIOR TO SHOP CLOSURE.
|
🔒 Subscribe | ||
|
|
ALLISON CHALMERS |
ALLISON CHALMERS FORKLIFT. UNIT WAS SAID TO RUN PRIOR TO PARKING BUT SEALS WERE BLOWN ON MAST. PARTS/REPAIRABLE UNIT. WILL NEED WORK. WILL NEED LOADED.
|
🔒 Subscribe | ||
|
|
MARENA HARTFORD |
MARENA HARTFORD PRECISION BENCH LATHE. INCLUDES DORIAN TOOL POST QUICK CHANGE HOLDER.
|
🔒 Subscribe | ||
|
|
RAIDER | 001-0360 |
RAIDER 001-0360 CNC KNEE MILL VERIFORM MULTI-AXIS CNC CONTROL S/N: 05124. 3 PHASE 208V.
|
🔒 Subscribe | |
|
|
TWO BINS OF ASSORTED SCRAP.
|
🔒 Subscribe | |||
|
|
BIN OF SCRAP WIRE.
|
🔒 Subscribe | |||
|
|
LARGE ASSORTMENT OF STEEL STOCK WITH RACK.
|
🔒 Subscribe | |||
|
|
BLACK DIAMOND |
BLACK DIAMOND DRILL POINT SHARPENER. INCLUDES STAND AND COLLETS AS PICTURED. 115V SINGLE PHASE.
|
🔒 Subscribe | ||
|
|
BIN OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
QTY 5 - ASSORTED CHUCKS.
|
🔒 Subscribe | |||
|
|
1979 | ENCO | 91034 |
1979 ENCO 91034 TABLE TOP MILL
|
🔒 Subscribe |
|
|
FANUC | A06B-6079-H206 |
FANUC A06B-6079-H206 SERVO AMPLIFIER.
|
🔒 Subscribe | |
|
|
BROWN AND SHARPE | 618 MICROMASTER |
BROWN AND SHARPE 618 MICROMASTER SURFACE GRINDER. INCLUDES 61804 PERMANENT MAGNETIC CHUCK.
|
🔒 Subscribe | |
|
|
BIN OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
BIN OF SCRAP STEEL.
|
🔒 Subscribe | |||
|
|
LARGE ASSORTMENT OF STEEL STOCK WITH RACK.
|
🔒 Subscribe | |||
|
|
STARRETT |
STARRETT MEASUREMENT GAUGES.
|
🔒 Subscribe | ||
|
|
ONE RACK OF NEW OLD HEX STEEL STOCK.
|
🔒 Subscribe | |||
|
|
ASSORTED STEEL HEX BAR STOCK.
|
🔒 Subscribe | |||
|
|
OKUMA | LC10 |
OKUMA LC10 CNC LATHE. MAX. BAR CAPACITY 1.5" DISTANCE BETWEEN CENTERS 9.84" SWING OVER BED 8" SPINDLE BORE 1.77" SPINDLE SPEEDS 4500 RPM MOTOR 10 HP TURRET POSITIONS 8 ELECTRICAL REQUIREMENTS 220V / 60HZ / 3-PH MACHINE DIMENSIONS 94" X 66" X 76" WEIGHT 8,000 LBS. UNIT WAS A SPARE THAT WAS USED BRIEFLY THEN STORED. WAS SAID TO BE RUNNING UNIT. S/N: 0696
|
🔒 Subscribe | |
|
|
KNEE MILL. ANILAM SPIRIT DRO. - KNEE MILL. UNMARKED MAKER. SELLER STATES THAT GEARBOX NEEDS CLUTCH WORK. ANILAM SPIRIT DRO.
|
🔒 Subscribe | |||
|
|
FANUC | A06B-6077-H111 |
FANUC A06B-6077-H111 POWER SUPPLY
|
🔒 Subscribe | |
|
|
STANLEY VIDMAR | 4 DRAWER |
4 DRAWER STANLEY VIDMAR 44 TALL X 30W X 28D. CONTENTS NOT INCLUDED.
|
🔒 Subscribe |
1997 AMERA SEIKI TC-2L
METALWORKING & FABRICATION EQUIPMENT
1997 AMERA SEIKI TC-2L LATHE. CHUCK SIZE 8 INCH, BAR CAPACITY 2 INCH, AXIS 2, POWER 20 HP, MAX RPM 6...
Hammer Price:
🔒
2002 MAZAK PFH-4800
CNC MACHINE CENTERS
2002 MAZAK PFH-4800 MACHINING CENTER. MACHINE WEIGHT 21,780LBS. DUAL PALLET SHUTTLE SYSTEM. 30HP SPI...
Hammer Price:
🔒
OKUMA LNC8
CNC MACHINE CENTERS
OKUMA LNC8 CNC LATHE. VOLTAGE 220/480V 3 PHASE. SWING OVER BED: 15.75" MAXIMUM TURNING DIAMETER: 9.8...
Hammer Price:
🔒
FADAL VMC4020HT
CNC MACHINE CENTERS
FADAL VMC4020HT VERTICAL MACHINING CENTER. FADAL CNC88 CONTROLS. SPECS: X AXIS TRAVEL: 40 " Y AXIS T...
Hammer Price:
🔒
SHELDON 15
METALWORKING & FABRICATION EQUIPMENT
SHELDON 15 LATHE. 15" X 40". INCLUDES 2 CHUCKS. TOOL POST HOLDER NOT INCLUDED....
Hammer Price:
🔒
CLARK GCS25WC
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLARK GCS25WC 5000LB PROPANE FORKLIFT. 188IN LIFT ON MAST. 6833HRS SHOWING. S/N: G138WC-0055-5513FA....
Hammer Price:
🔒
DOALL C-912A
WOODWORKING EQUIPMENT
DOALL C-912A HORIZONTAL AUTOMATIC BAND SAW. S/N: 368-79261 CAPACITY 9 H X 12 W BLADE SIZE 1 X 146-14...
Hammer Price:
🔒
1998 AMERA-SEIKI GT-32
CNC MACHINE CENTERS
1998 AMERA-SEIKI GT-32 CNC LATHE. SWING OVER SLIDE COVER - 10.8" SPINDLE SPEED RANGE - ( STEPLESS ) ...
Hammer Price:
🔒
1998 AMERA-SEIKI GT-32
CNC MACHINE CENTERS
1998 AMERA-SEIKI GT-32 CNC LATHE. SWING OVER SLIDE COVER - 10.8" SPINDLE SPEED RANGE - ( STEPLESS ) ...
Hammer Price:
🔒
TOLHURST
MISC
OILY CHIP WRINGER SYSTEM. UNMARKED BUT APPEARS TO BE TOLHURST BRAND OR SIMILAR....
Hammer Price:
🔒
MICRO-VU EDGE DETECTOR ED-50
TEST, MEASUREMENT & QUALITY EQUIPMENT
MICRO-VU EDGE DETECTOR ED-50 OPTICAL COMPARATOR...
Hammer Price:
🔒
STANLEY VIDMAR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
14 DRAWER STANLEY VIDMAR 59 TALL X 30W X 28D. INCLUDES CONTENTS....
Hammer Price:
🔒
STANLEY VIDMAR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
13 DRAWER STANLEY VIDMAR 44 TALL X 30W X 28D. CONTENTS NOT INCLUDED....
Hammer Price:
🔒
STANLEY VIDMAR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
14 DRAWER STANLEY VIDMAR 59 TALL X 30W X 28D. INCLUDES CONTENTS....
Hammer Price:
🔒
KAESER AS31
AIR COMPRESSORS
25HP KAESER AS31 ROTARY SCREW AIR COMPRESSOR. 109CFM. 60,144 HRS SHOWING. UNIT WAS FUNCTIONAL PRIOR ...
Hammer Price:
🔒
BROWN AND SHARPE
METALWORKING & FABRICATION EQUIPMENT
BROWN AND SHARPE AUTOMATIC SCREW MACHINE....
Hammer Price:
🔒
WILTON 4300A
METALWORKING & FABRICATION EQUIPMENT
WILTON 4300A COMBINATION BELT AND DISC SANDER. 115V SINGLE PHASE....
Hammer Price:
🔒
WESTBURY
METALWORKING & FABRICATION EQUIPMENT
WESTBURY KNEE MILL. 9IN X 48IN TABLE. INCLUDES VISE....
Hammer Price:
🔒
ACME GRIDLEY 1-1/4" RA6
METALWORKING & FABRICATION EQUIPMENT
ACME GRIDLEY 1-1/4" RA6 AUTOMATIC SCREW MACHINE. 6 SPINDLE....
Hammer Price:
🔒
ACME GRIDLEY
METALWORKING & FABRICATION EQUIPMENT
ACME GRIDLEY AUTOMATIC SCREW MACHINE. 6 SPINDLE. UNIT WAS SAID TO ME RUNNING MACHINE PRIOR TO SHOP C...
Hammer Price:
🔒
ALLISON CHALMERS
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
ALLISON CHALMERS FORKLIFT. UNIT WAS SAID TO RUN PRIOR TO PARKING BUT SEALS WERE BLOWN ON MAST. PARTS...
Hammer Price:
🔒
MARENA HARTFORD
METALWORKING & FABRICATION EQUIPMENT
MARENA HARTFORD PRECISION BENCH LATHE. INCLUDES DORIAN TOOL POST QUICK CHANGE HOLDER....
Hammer Price:
🔒
RAIDER 001-0360
CNC MACHINE CENTERS
RAIDER 001-0360 CNC KNEE MILL VERIFORM MULTI-AXIS CNC CONTROL S/N: 05124. 3 PHASE 208V....
Hammer Price:
🔒
BLACK DIAMOND
POWER AND HAND TOOLS
BLACK DIAMOND DRILL POINT SHARPENER. INCLUDES STAND AND COLLETS AS PICTURED. 115V SINGLE PHASE....
Hammer Price:
🔒
FANUC A06B-6079-H206
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
FANUC A06B-6079-H206 SERVO AMPLIFIER....
Hammer Price:
🔒
BROWN AND SHARPE 618 MICROMASTER
SURFACE FINISHING EQUIPMENT
BROWN AND SHARPE 618 MICROMASTER SURFACE GRINDER. INCLUDES 61804 PERMANENT MAGNETIC CHUCK....
Hammer Price:
🔒
OKUMA LC10
CNC MACHINE CENTERS
OKUMA LC10 CNC LATHE. MAX. BAR CAPACITY 1.5" DISTANCE BETWEEN CENTERS 9.84" SWING OVER BED 8" SPINDL...
Hammer Price:
🔒
METALWORKING & FABRICATION EQUIPMENT
KNEE MILL. ANILAM SPIRIT DRO. - KNEE MILL. UNMARKED MAKER. SELLER STATES THAT GEARBOX NEEDS CLUTCH W...
Hammer Price:
🔒
STANLEY VIDMAR 4 DRAWER
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
4 DRAWER STANLEY VIDMAR 44 TALL X 30W X 28D. CONTENTS NOT INCLUDED....
Hammer Price:
🔒