HUGE 6 DAY SALE Major Offshore Oil Gas Facility Closure DAY 1

ORGANIZATIONAL WORK BOARD

AMERICAN TOOL WORKS HOLE WIZARD 9" X 3' RADIAL ARM DRILL WITH INDEXER AND ACCESSORIES, RISER BLOCK, TWO INDEXERS, WORK BENCH

CAT 50 TAPPING HEAD AND LARGE INDEXABLE DRILL

BORING BAR SHAFTS, 12"

GOULD FERROCHARGER FORKLIFT CHARGER MODEL GCF-36-725 T1 S/N: 380C07943 SPECIFICATIONS: NO CIRCUITS 1 BATTERY TYPE LA CELLS. 36 AH. 601-725 AC INPUT: VOLTS 208/240/480 MAX AMPS 51/46/23 PH 3 HX 60 DC OUTPUT PER CIRCUIT: VOLTS. 72 MAX AMPS. 145

1997 ALBERTS 1997 HYDRAULIC BALER/COMPACTOR, UNIT FEATURES A 72-INCH WIDE OPENING AND 40-INCH DEEP CHAMBER. IT IS IDEAL FOR CARDBOARD AND OTHER RECYCLABLES. THIS UNIT HAS A 50-TON RAM FORCE AND A 4-FOOT STROKE.

TOOLS MAY BE REQUIRED TO PICK UP YOUR PURCHASES - YOU MAY NEED TOOLS TO PICKUP YOUR ITEMS. WE DO NOT HAVE TOOLS AVAILABLE FOR DISASSEMBLY OF YOUR PURCHASES.

CUSTOM FIXTURE

50 TAPER TOOL HOLDER CLAMP PEDESTAL

TOOL CHANGING FIXTURE WITH STAND

2023 FIVES GIDDINGS & LEWIS VTC-1600 VTL MAIN SPINDLE TURNING DIAMETER MAX: 78.7" MAIN SPINDLE TURNING LENGTH MAX: 59.1" MAIN SPINDLE CHUCK DIAMETER: 49.5" MAIN SPINDLE CHUCK DIAMETER OPT: 63" MAIN SPINDLE MAX SWING: 78.7" X-AXIS TRAVEL: 47.6" Z-AXIS TRAVEL: 68.9" X-AXIS RAPID TRAVERSE: 787 IPM Z-AXIS RAPID TRAVERSE: 787 IPM RAM SIZE: 9.84" X 9.84" FEED THRUST AVAILABLE, X-AXIS: 7,600 LBS FEED THRUST AVAILABLE, Z-AXIS DOWN: 7,600 LBS FEED THRUST AVAILABLE, Z-AXIS UP: 5,000 LBS RIGHT HAND HEAD W/ INTEGRATED LIVE SPINDLE AC DRIVE MOTOR S6-40% 44 HP AC DRIVE MOTOR CONTINUOUS: 29 HP TWO SPEED GEARBOX SPINDLE SPEED: 4,000 RPM C-AXIS POSITIONING/CONTOURING TABLE NUMBER OF POSITIONS 360,000 RAPID TRAVERSE RATE 10 RPM MAXIMUM CUTTING FEEDRATE 5 RPM TORQUE AVAILABLE 8,100 NM TABLE BASE TWO SPEED TABLE DRIVE TRANSMISSION4.0:1 GEAR RATIO AC DUAL DRIVE MOTORS DRIVING POWER (S6-40 RATING): 121 HP, (CONT. RATING) 99 HP TABLE/CHUCK SPEED: 1-400 RPM LOW RANGE: 1-110RPM HIGH RANGE: 1-400 RPM CONSTANT TORQUE: 18,130 FT/LB LOW RANGE: 1-28.8 RPM HIGH RANGE: 1-115 RPM TABLE BEARINGS ASSEMBLED INTO MODULAR UNIT AND PRELOADED FOR SUPERIOR STIFFNESS HEAVY DUTY THRUST BEARING OD - AXIAL LOAD: 25" TAPER ROLLER BEARING OD - RADIAL LOAD: 16.5" THRUST BEARING LOAD CAPACITY AT 33 1/3 RPM: 181,200 LBS TABLE LOAD CAPACITY: 33,000 LBS SHUTTLE SYSTEM MAXIMUM PALLET SWING: 78.4" MAXIMUM PALLET SHUTTLE CAPACITY: 15,400 LBS PALLET EXCHANGE TIME (APPROX.): 120 SEC Y-AXIS ATTACHMENT MACHINING RANGE OF Y FEATURES LIMITED TO +/- 90 DEGREES MAXIMUM POWER (CONT): 29 HP MAXIMUM POWER (S6-40%): 44 HP MAXIMUM TORQUE: 670 FT/LB MAXIMUM SPEED: 2200 RPM MAXIMUM HEAD ROTATION RATE: 8.7 RPM LIVE SPINDLE TOOLING TAPER: CAPTO C8 ATTACHMENT TRAVEL LIMITED TO X-AXIS TRAVEL RIGHT OF CENTER AUTOMATIC ATTACHMENT PICK-UP FROM TOOL CHANGER OR TOOL DRAWER AUTOMATIC TOOL CHANGING INTO ATTACHMENT VIA TOOL DRAWER OR CHAIN MAGAZINE COOLANT THRU NOZZLES UP TO 16 BAR COOLANT THRU TOOL UP TO 70 BAR EQUIPPED WITH: RENISHAW TOOL PROBE MIST COLLECTOR HIGH PRESSURE COOLANT SYSTEM DUAL FILTER AUTO CROSSOVER FOR HIGH PRESSURE COOLANT SYSTEM TANK MOUNTED OIL SKIMMER LARGE COOLANT TANK CAPACITY: 475 GAL LEAF TYPE CHIP CONVEYOR FULL MACHINE ENCLOSURE W/ OPEN TOP FANUC 30I/31I-B CONTROL S/N: 524-0153-23

2009 MAZAK MAZATECH FH-10800 4 AXIS CNC HORIZONTAL MACHINING CENTER, HMC S/N: 211741 SPECIFICATIONS: X-AXIS 66.9" Y-AXIS 55.1" Z-AXIS 55.1" POWER 50 HP RPM 7,000 RPM # ATC 40 TAPER CAT-50 PALLET-W 39.3" PALLET-L 39.3" MAX WORKPIECE DIAMETER 80" MAX WORKPIECE HEIGHT 40" MAX PALLET LOAD 6,600 LB SPINDLE TO PALLET CENTER 64" # AXIS 4 RAPID TRAVERSE (X/Y/Z) 1,600 IN/MIN. CONTROL MAZATROL 640M DIMENSIONS 274" X 111" X 132" WEIGHT 68,000 LB EQUIPPED WITH: MAZATROL 640M CNC CONTROL

1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC LATHE, MAZATROL T PLUS - 1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC TURNING CENTER, SLANT BED LATHE, MAZATROL T PLUS SN: 137948 SPECIFICATIONS: # AXIS 2 SWING 42" TURNING DIAMETER 32" CENTER DISTANCE 73.8" CHUCK SIZE 32" BAR CAPACITY 6.3" X AXIS TRAVEL 27.5" Z AXIS TRAVEL 80.1" RAPID TRAVERSE (X/Z) 475/640 IPM SPINDLE SPEED (RPM) 1,000 MAIN MOTOR 60 HP TAILSTOCK TRAVEL 70" EQUIPPED WITH: TAILSTOCK MAZATROL T PLUS

2010 FRONIUS CLADDING SYSTEMS FPA 9000 ETR-S TIG ENDLESS TORCH ROTATION SYSTEM, AUTOMATED CLADDING SYSTEM, AUTOMATED WELDING SN: 24320182 EQUIPPED WITH: ID NUMBER: MWM-268, SERIAL NUMBER: 24320182 MWM-268 COLUMN BASE, 2 X REMOTE CONTROLS, CABLE TRAIN, USER MANUALS AND MISCELLANEOUS COVERS MWM-268 BOOM MWM-268 TIG-HOTWIRE ETR-S HEAD ASSEMBLY MWM-268 SYSTEM CONTROLLER MWM-268 POWER SOURCE / HOT WIRE POWER SOURCE MWM-268 MOTORIZED CROSS SLIDE SYSTEM MWM-268 COLUMN ASSEMBLY, INCLUDING BOOM CARRIAGE AND ELECTRIC CABINET

1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC LATHE, MAZATROL T PLUS - 1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC TURNING CENTER, SLANT BED LATHE, MAZATROL T PLUS SN: 136314 SPECIFICATIONS: # AXIS 2 SWING 42" TURNING DIAMETER 32" CENTER DISTANCE 73.8" CHUCK SIZE 32" BAR CAPACITY 6.3" X AXIS TRAVEL 27.5" Z AXIS TRAVEL 80.1" RAPID TRAVERSE (X/Z) 475/640 IPM SPINDLE SPEED (RPM) 1,000 MAIN MOTOR 60 HP TAILSTOCK TRAVEL 70" EQUIPPED WITH: TAILSTOCK MAZATROL T PLUS STEADY REST

2007 MAZAK SLANT TURN 60N CNC LATHE, MAZATROL 640T - 2007 MAZAK SLANT TURN 60N CNC TURNING CENTER, MAZATROL 640T, SLANT BED CNC LATHE S/N: 201048 SPECIFICATIONS: # AXIS 2 SWING 36" TURNING DIAMETER 28.75" CENTER DISTANCE 120" CHUCK SIZE 24" BAR CAPACITY 4" X AXIS TRAVEL 25.3" Z AXIS TRAVEL 120.1" RAPID TRAVERSE (X/Z) 475/630 IPM SPINDLE NOSE A2-20 SPINDLE SPEED 1,000 RPM MAIN MOTOR 60 HP EQUIPPED WITH: TAILSTOCK RELATED TOOLING

1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC LATHE, MAZATROL T PLUS - 1998 MAZAK SL-80 SLANT TURN 80N HORIZONTAL CNC TURNING CENTER, SLANT BED LATHE, MAZATROL T PLUS S/N: 137949 SPECIFICATIONS: # AXIS 2 SWING 42" TURNING DIAMETER 32" CENTER DISTANCE 73.8" CHUCK SIZE 32" BAR CAPACITY 6.3" X AXIS TRAVEL 27.5" Z AXIS TRAVEL 80.1" RAPID TRAVERSE (X/Z) 475/640 IPM SPINDLE SPEED (RPM) 1,000 MAIN MOTOR 60 HP TAILSTOCK TRAVEL 70" EQUIPPED WITH: TAILSTOCK MAZATROL T PLUS

2012 ARC SPECIALTIES AUTOMATED BORE CLADDER SYSTEM / WELDER TYPE ARC-05R (DISMANTLED) BASEMOUNT MANIPULATORS HOT ONE SOLID STATE HOTWIRE POWER SUPPLY MILLER XMT 450 CC/CV ELECTRICAL CABINET CABLES / PERIPHERALS. ASSEMBLED MACHINE IN PHOTOS IS FOR EXAMPLE ONLY. LOT CONSISTS OF THE DECOMMISSIONED MACHINE PARTS SHOWN IN THE PHOTOS. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2012 DOOSAN MYNX 5400/40 CNC VMC, 4 AXIS, ROTARY TABLE - 2012 DOOSAN MYNX 5400/40 CNC VERTICAL MACHINING CENTER, VMC S/N: MV0046-000659 SPECIFICATIONS: X-AXIS 40.2" Y-AXIS 21.3" Z-AXIS 20.8" MAX TOOL DIAMETER 3.54" MAX TOOL LENGTH 11.8" MAX TOOL WEIGHT 17.6 LBS. RAPID TRAVERSE RATES 1181 IPM SPINDLE MOTOR 20 HP SPINDLE SPEED 8000 RPM SPINDLE TAPER CAT 40 TABLE LOAD CAPACITY: 1760 LBS. TABLE SIZE 47.2" X 21.2" TOOLS 30 EQUIPPED WITH: 2011 KITAGAWA ROTARY TABLE 4 AXIS KURT VISE LNS CHIP CONVEYOR

2008 MAZAK NEXUS HCN 6800 II 630MM 4 AXIS HORIZONTAL MACHINING CENTER, HMC - 2008 MAZAK NEXUS HCN 6800 II 4 AXIS HORIZONTAL MACHINING CENTER, HMC S/N: 211885 SPECIFICATIONS: X-AXIS TRAVEL 41.34" Y-AXIS TRAVEL 35.43" Z-AXIS TRAVEL 38.58" SPINDLE TAPER CAT 50 SPINDLE DRIVE MOTOR 50 HP SPINDLE SPEED 10,000 RPM NUMBER OF PALLETS 2 PALLET SIZE 24.8" X 24.8" 630 MM PALLET SIZE (W) 24.8" PALLET SIZE (L) 24.8" PALLET LOAD CAPACITY 3307 LB B-AXIS TRAVEL: 360,000 TABLE INDEXING: 0.001 EQUIPPED WITH: FULL 4TH AXIS CHIP CONVEYOR RENISHAW PROBING SYSTEM MAZATROL MAZAK NEXUS CONTROL

NATURAL GAS GENERATOR

2000 MAZAK SLANT TURN 60 UNIVERSAL CNC SLANT BED LATHE, FANUC CONTROL - MAZAK SLANT TURN 60 UNIVERSAL 2000 HEAVY DUTY CNC TURNING CENTER SPECIFICATIONS: CAPACITY: MAX TURNING DIAMETER: 28 MAX TURNING LENGTH: 78.74 MAX BAR CAPACITY: 10 SWING OVER BED: 36 TRAVELS: X AXIS TRAVEL: 25.6 Z AXIS TRAVEL: 80.1 RAPID TRAVERSE X AXIS: 475 IPM RAPID TRAVERSE Z AXIS: 315 IPM SPINDLE: SPINDLE NOSE: A2-15 ? SPINDLE BORE: 10 SPINDLE SPEED: 0 1000 RPM SPINDLE MOTOR: 60 HP TURRET CAPACITY: 10 STATIONS EQUIPPED WITH: SCHUNK ROTA TB 630-330 3 JAW POWER CHUCK UPDATED FOR FANUC BASED CONTROL TAILSTOCK ALL AVAILABLE RELATED ACCESSORIES MACHINE HAS BEEN REBUILT AND RETROFITTED WITH FANUC CONTROL ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

[WARNER AND SWASEY SC-32/LB4] CNC SLANT BED LATHE, FANUC CONTROL - WARNER AND SWASEY SC-32/LB4 CNC SLANT BED TURNING CENTER, FANUC CONTROL, BORING LATHE S/N: 2723199 SPECIFICATIONS: CHUCK SIZE 32" SWING OVER BEDWAYS 36-1/2" SWING OVER CARRIAGE WING 32-1/2" SWING OVER C.SLIDE WAY BLOCK 32-1/2" THRU HOLE IN SPINDLE 19" SPINDLE NOSE 28" LONGITUDINAL STROKE END TURRET 70-13/16" CROSS STROKE END TURRET 21-5/8" LONGITUDINAL STROKE END TURRET 68-3/8" CROSS STROKE SIDE TURRET 14-3/4" MAX. MOTION RATE LONGITUDINAL 250 IPM MAX. MOTION RATE CROSS 125 IPM MOTOR HEAVY DUTY DC VARIABLE SPEED 150/100/75 SPINDLE SPEEDS 9-400 MACHINE WEIGHT (APPROX.) 38,000 LBS EQUIPPED WITH: FANUC 18I-T CNC CONTROL CUSTOM TURRET BORING BAR MACHINE HAS BEEN PROFESSIONALLY REBUILT AND RETROFITTED WITH FANUC CONTROL

2014 SUMMIT HBM110 4 AXIS HORIZONTAL BORING MILL - 31.5" X 39" TABLE. SPECIFICATIONS: SPINDLE: DIAMETER OF SPINDLE: 4.3 TAPER OF SPINDLE: # 50 NMT SPINDLE SPEED: 20 - 1,500 RPM (VARIABLE) TRAVELS: VERTICAL TRAVEL (Y-AXIS): 39.4 CROSS TRAVEL (X-AXIS): 63 SADDLE TRAVEL (W-AXIS): 49.2 SPINDLE TRAVEL (Z-AXIS): 16 FEED RANGE (X, Y, & W): .118 - 37.4 IPM RAPID TRAVERSE (X, Y, & W): .118 - 15.75 IPM TABLE: SIZE OF TABLE: 31 1/2 X 39.4 MAX. WEIGHT OF WORKPIECE: 5,500 LBS. TABLE HEIGHT FROM FLOOR: 49 TABLE T-SLOT WIDTH: .875 ROTATION: MANUAL INCREMENT: 1 MOTOR: 20 HP / 220V, 440V / 3PH STANDARD FEATURES: PRECISION HARDENED AND GROUND BEDWAYS FULLY AUTOMATIC LUBRICATION SYSTEM PRECISION GROUND BALL SCREWS STATE OF THE ART ELECTRONICS WITH PLC CONTROL RAPID TRAVERSE IN ALL FEED DIRECTIONS FULL STEEL TELESCOPING WAY COVERS ON X AND W-AXIS AIR POWER DRAWBAR BUILT-IN ROTARY TABLE 360° 6,600 LBS. CAPACITY FOUR AXIS ELECTRONIC DRO HYDRAULIC CLAMPING (X, Y, AND W-AXIS) MECHANICAL SPECIFICATIONS: DIMENSIONS: 157 X 169 X 120 H WEIGHT: APPROX. 27,500 LBS.

2007 VANGUARD 86.5" AUTOMATIC WELDING REVOLVING TABLE, MODEL HZT40 - 2008 VANGUARD 86" AUTOMATIC WELDING REVOLVING TABLE, MODEL HZT40, WELDING POSITIONER

2004 BEHRINGER HBP 530A 20" X 20" TWIN COLUMN AUTOMATIC HORIZONTAL BAND SAW RECTANGULAR CUTTING CAPACITY: 20.8 X 20.4 ROUND CUTTING CAPACITY: 20.8 CUTTING SPEEDS: 62 TO 426 FPM FEED SINGLE STROKE: 39.38 BLADE SIZE: 237 X 2 X 0.063 DRIVE MOTOR: 7.4HP ELECTRICAL: 230V/3PH EQUIPPED WITH: ROLLER INFEED AND OUTFEED CONVEYORS

2013 HYD MECH V-18 VERTICAL BAND SAW SN: JE0313420 SPECIFICATIONS: HORIZONTAL 18 VERTICAL 20 @ 45 LEFT OR RIGHT 13 BLADE 1 1/4 X 14 11 X .042 BLADE SPEED 65-385 SFM BLADE TENSION HYDRAULIC BLADE GUIDES CARBIDE BLADE WHEEL DIAMETER 19 DIA MOTORS 7 1/2 HP BLADE DRIVE 2 HP HYDRAULIC DRIVE PRESSURE COMPENSATED PUMPS CONSTANT PRESSURE VARIABLE FLOW 6 1/2 GPM HYDRAULIC PUMP 3 1/2 GPM COOLANT PUMP ( 150W ) HEAD SWING HYDRAULICALLY POSITIONED AND LOCKED. FULL 45 LEFT OR RIGHT TABLE HEIGHT 38 FEED SYSTEM HYDRAULIC VARIABLE PRESSURE 0-300 PSI INDEPENDENT FEED RATE 0-15 IPM SYSTEM PRESSURE 650 PSI TANK CAPACITY HYDRAULIC 7 US GALLONS COOLANT 30 US GALLONS GUIDE ARM HYDRAULICALLY POSITIONED AND LOCKED MACHINE WEIGHT 4500 LBS

[MITSUBISHI EA12E EDM SINKER] EDM SINKER, WITH LOADED TOOLING CABINET, SINKER EDM, SYSTEM 3R TOOLING SPECIFICATIONS: X-AXIS TRAVEL 15.75" Y-AXIS TRAVEL 11.81" Z-AXIS TRAVEL 11.81" CONTROL MITSUBISHI C-AXIS YES CHUCK 3R POWER REQUIREMENT 200/220/3/60 GLASS SCALE FEEDBACK ROTARY ENCODER/SCALE ON Z-AXIS WORK TANK DIMENSIONS 33.46" X 23.62" X 13.78" TABLE TO PLATEN 7.8" X 19.6" TABLE DIMENSIONS 23.62" X 17.71" MAX WORKPIECE WEIGHT 1,543 LBS MAX ELECTRODE WEIGHT 110 LBS MINIMUM INPUT .00001" MINIMUM DRIVE RESOLUTION .000002" MACHINE DIMENSIONS 100.6" X 120.5" MACHINE WEIGHT 5,000 LBS ADDITIONAL SPECS SHOWN IN PHOTOS.

[DR-M30LT] DURA-RAMP PORTABLE LOADING DOCK MODEL DR-M30LT SN: 35319(49915) SPECIFICATIONS: MODEL NUMBER DR-M30LT LEVEL LENGTH 6 FT RAMP LENGTH 24 FT TOTAL WIDTH 77 IN SERVICE WIDTH 72 IN CAPACITY 20,000 LBS WEIGHT 6,846 LBS. SERVICE HEIGHT. 42 - 56 IN.

2012 HURCO VMX50 CNC VERTICAL MACHINING CENTER, 4TH AXIS ROTARY - 2012 HURCO VMX 50 CNC VERTICAL MACHINING CENTER, 4 AXIS VMC, 4TH AXIS ROTARY INDEXER S/N: M553-16002112DLCS SPECIFICATIONS: TABLE SIZE: 59" X 26" TABLE CAPACITY: 3,000 LBS X-AXIS TRAVEL: 50" Y-AXIS TRAVEL: 26" Z-AXIS TRAVEL: 24" SPINDLE SPEED: 12000 RPM SPINDLE TAPER: CT 40 MAIN MOTOR: 24 HP TOOL CHANGER CAPACITY: 24 ATC X-AXIS RAPID TRAVERSE RATE: 1181 IPM Y-AXIS RAPID TRAVERSE RATE: 1181 IPM Z-AXIS RAPID TRAVERSE RATE: 787 IPM EQUIPPED WITH: KURT VISE HURCO CNC CONTROL CHIP CONVEYOR 2012 HURCO H-400 4TH AXIS ROTARY INDEXER S/N: H400-0006

LINCOLN CLASSIC 300D ENGINE DRIVEN DIESEL WELDER K1643-7 , STICK WELDER SN: C1080400181 SPECIFICATIONS: 300 AMP DC ARC WELDER ALL COPPER WINDINGS PURE DC POWER GENERATOR RATED DC OUTPUT(1) CURRENT/VOLTAGE/DUTY CYCLE: NEMA RATINGS 300A / 32V / 60% 250A / 30V / 100% 98V DC MAX OCV DC CURRENT FINE ADJUSTMENT RANGE: 40 - 350 AMPS 220 - MAX 160 - 240 120 - 190 80 - 130 MIN - 90 AUXILIARY POWER: 3,000 WATTS 60 HZ, AC 20 AMPS @ 115V WITH SEALED GFCI MODULE 13 AMPS @ 230V DIMENSIONS: H X W X L INCHES 37.1 X 24.0 X 65.0 WEIGHT LBS: 1354 HRS: 3618

2016 KNIGHTS KMTG 181818-3 FURNACE OVEN SN: 458334 SPECIFICATIONS: MAX TEMP 2350 DEGREES F

RIDGID 1822-1 PIPE THREADER WITH TOOLING SPECIFICATIONS: PIPE THREADING CAPACITY: 1/8 IN. TO 2 IN. (3 MM-50 MM) OR 2-1/2 IN. TO 4 IN. (62 MM-100MM) WITH 141 GEARED THREADER BOLT THREADING CAPACITY: 1/4 IN. TO 2 IN. (6MM-50MM) PIPE CUTTING CAPACITY: 1/8 IN. TO 2 IN. (3 MM-50 MM) MOTOR: 1/2 HP, 115 V, 60 HZ, 38 RPM, SINGLE-PHASE INDUCTION. MOTOR CONTROL: OPEN/OFF/CLOSE WITH HEAVY-DUTY ROTARY SWITCH AND FOOT SWITCH. TRANSMISSION: TWO (2) SPEEDS (45 RPM FOR STANDARD PIPE AND 16 RPM FOR LOW VOLTAGE USE AND SPECIAL MATERIALS). SPINDLE SPEED: 45 AND 16 RPM, RIGHT HAND, CAN BE ADAPTED TO LEFT-HAND OPERATION FRONT CHUCK: AUTOMATIC GRIPPING AND CENTERING. S/N: 104958

STEEL CAGE STORAGE CELL, 51' 4-1/2" X 24' 8" X 8'

ANGLE PLATE (36W X 96H X 48 BASE)

ANGLE PLATE (36W X 96H X 48 BASE)

LARGE TESTING PRESS, LOCATED IN A PIT.

LINCOLN CLASSIC 300 III SA300-TM27 GAS WELDER GENERATOR, STICK WELDER HRS: 5620

1998 MAZAK FH 880 800MM CNC HORIZONTAL MACHINING CENTER - 1998 MAZAK FH 880 CNC HORIZONTAL MACHINING CENTER, HMC S/N: 135763 SPECIFICATIONS: PALLET SIZE / NUMBER OF PALLETS 31.5X31.5/ 2 PLT. TABLE INDEXING 1 DEG. PLT INDEX TABLE LOAD CAPACITY 4,850 LBS. MAXIMUM PART SIZE DIAMETER X HEIGHT 49.21 X 49.21 X-AXIS TRAVEL 51.18 Y-AXIS TRAVEL 43.31 Z-AXIS TRAVEL 39.37 SPINDLE CENTER TO TABLE TOP 2.36 45.67 SPINDLE MOTOR 30 MIN. / CONTINUOUS 50 HP / 35 HP SPINDLE NOSE CAT #50 SPINDLE SPEED 35 7,000 RPM TOOL MAGAZINE CAPACITY 80 TOOL MAGAZINE MAX. TOOL DIAM/LENGTH/WEIGHT 10.24/19.69/44 LBS. TOOL TO TOOL TIME/CHIP TO CHIP TIME 3 SECONDS/9 SECONDS RAPID TRAVERSE X, Y / Z 945 IPM / 787 IPM MACHINE DIMENSIONS 234 X 166X 129 MACHINE WEIGHT 59,000 LBS. EQUIPPED WITH 2 PALLET CHANGER 40 POSITION TOOL ATC MAZATROL T PLUS CONTROL

SANDVIK C8 TOOLS

[48X72] STEEL TABLE WITH JIB CRANE, ELECTRIC CHAIN HOIST, TOOLBOX

STRONG HOLD LARGE STORAGE CABINET, GREY

80 BORING BAR

60" BAR - 60 BAR

275 PRECISION TIG WELDER LINCOLN ELECTRIC

60" LARGE BORING BAR

LOT OF 50 TAPER TOOLING, FACE MILL HOLDERS, BORING BARS, INDEXABLE DRILLS, ETC., WITH TOOL STAND INCLUDED.

LOT OF 50 TAPER TOOLING, FACE MILL HOLDERS, BORING BARS, INDEXABLE DRILLS, ETC., WITH TOOL STAND INCLUDED.

LISTA CABINET WITH HAND TOOLS, FACE MILLS, HARDWARE

LYON LARGE STORAGE CABINET, GREY