Machine Shop Single Facility Auction
Category: CNC MACHINE CENTERS
Total Lots:
110
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
1991 | OKUMA | LB-45II |
1991 OKUMA LB-45II CNC LATHE SWING: 35.43" TURNING DIAMETER: 25.98" CENTER DISTANCE: 82" SPINDLE BORE: 4.33" X AXIS TRAVEL: 17.32" Z AXIS TRAVEL: 81.1" X-AXIS RAPID TRAVERSE RATE: 590 IPM Z-AXIS RAPID TRAVERSE RATE: 787 IPM SPINDLE SPEED: 2800 RPM MOTOR: 50 HP TURRET CAPACITY: 12 EQUIPPED WITH: OKUMA OSP7000 CONTROL, IGF, TAILSTOCK, CHIP CONVEYOR, 24" HYDRAULIC CHUCK
|
🔒 Subscribe |
|
|
2004 | KAFO | VMC-15800 |
2004 KAFO VMC-15800 VERTICAL MACHINING CENTER X-AXIS TRAVEL: 59.055" Y-AXIS TRAVEL: 31.5" Z-AXIS TRAVEL: 27.559" RAPID TRAVERSE (X,Y,Z): 315 IPM MAX CUTTING SPEED 157 IPM TABLE SIZE 74.8 X 33.4 MAX TABLE LOAD: 4800LBS SPINDLE TAPER: 50 SPINDLE SPEED: 6000 RPM CONTROL: FANUC 18-M MACHINE WEIGHT: 28660LBS EQUIPPED WITH: FANUC SERIES 18-M CONTROL, CHIP CONVEYER, OIL CHILLER, THROUGH SPINDLE COOLANT, UPGRADED MEMORY
|
🔒 Subscribe |
|
|
1995 | HAAS | VF-0 |
1995 HAAS VF-0 CNC VERTICAL MACHINING CENTER TRAVELS: X-AXIS: 20 Y-AXIS: 16 Z-AXIS: 20 RAPID TRAVERSE RATES: 710 INCH PER MINUTE CUTTING FEED RATES: 500 INCH PER MINUTE SPINDLE NOSE TO TABLE (MIN.- MAX.): 4 24 TABLE: LENGTH: 26 WIDTH: 14 NUMBER OF STD T-SLOTS: 3 T-SLOT WIDTH: 5/8 MAX WEIGHT ON TABLE: 3000 LBS SPINDLE: TAPER SIZE: 40 SPEED RANGE: 0 7500 RPM SPINDLE POWER: 20 HP MAX TORQUE: 90FT-LB @ 2000 RPM AUTOMATIC TOOL CHANGER: CAPACITY: 20 + 1 MAX TOOL WEIGHT: 12 LBS MAX TOOL DIA: 3.6 MAX TOOL LENGTH: 13 TOOL CHANGING TIME: 3.2 SECONDS GENERAL: AIR REQUIRED: 100 PSI, 4 SCFM POWER: 220V / 66FLA / 3-PHASE OVERALL DIMENSIONS: 92 X 95 X 95 HIGH WEIGHT: 7000 LBS EQUIPPED WITH: HAAS CNC CONTROL 4TH AXIS, PROGRAMMABLE COOLANT NOZZLE, CHIP AUGER, RIGID TAPPING S/N: 4241
|
🔒 Subscribe |
|
|
2001 | OKUMA | CROWN L1420 |
2001 OKUMA CROWN L1420 MAX SWING OVER BED ..................................... 28" MAX SWING OVER SADDLE................................... 18.9" MAX TAIL STOCK POSITION................................. 31" MAX TURNING LENGTH...................................... 25.29" MAX WORK DIAMETER ...................................... 14.17" CHUCK SIZE.............................................. 12" SPINDLE BORE............................................ 3" CROSS TRAVEL (X-AXIS)................................... 9.05" LONGITUDINAL TRAVEL (Z-AXIS)............................ 25.59" RAPID TRAVERSE RATE (X-AXIS)............................ 472 IPM RAPID TRAVERSE RATE (Z-AXIS)............................ 591 IPM TOOL POSITIONS.......................................... 12 SPINDLE NOSE ........................................... A2-8 SPINDLE SPEED.....................................4200 RPM SPINDLE DRIVE MOTOR (30 MINUTE)......................... 30 HP HYDRAULIC TAILSTOCK STROKE.............................. 4.72" HYDRAULIC TAILSTOCK TAPER............................... #5 MT APPROXIMATE MACHINE DIMENSIONS.......................... 135" X 72" APPROXIMATE MACHINE WEIGHT.............................. 15,000 LBS S/N: 0366 OKUMA OSP-U10L CONTROL
|
🔒 Subscribe |
|
|
2014 | ELECTRO ARC | DC TABLETOP METAL DISINTEGRATOR |
2014 ELECTRO ARC DC TABLETOP METAL DISINTEGRATOR WORK TOP 40 X 32 (1020 X 820MM) CAPACITY: 4000 LB (1912 KG) COLUMN 2-3/4 (70 MM) DIA. X 50 (1270 MM) HIGH DOUBLE CROSSARMS 36 (914 MM) X 1-1/2 (38 MM) 1-SAC SINGLE CROSSARM 220V, 30A, 50/60HZ
|
🔒 Subscribe |
|
|
BROWN & SHARPE | REFLEX 454 |
BROWN & SHARPE REFLEX 454 CMM (DESK INCLUDED) WORK CAPACITY (X-AXIS)................................... 22" WORK CAPACITY (Y-AXIS)................................... 29.6" WORK CAPACITY (Z-AXIS)................................... 19" MEASURING RANGE (X-AXIS)................................. 18" MEASURING RANGE (Y-AXIS)................................. 20" MEASURING RANGE (Z-AXIS)................................. 16" MAXIMUM TABLE LOAD....................................... 500 LBS. DISPLAY RESOLUTION....................................... .00001" MAXIMUM VECTOR POSITIONING VELOCITY...................... 12"/SECOND MAXIMUM ACCELERATION..................................... 11.6"/SECOND APPROXIMATE MACHINE DIMENSIONS........................... 34" X 43" APPROXIMATE MACHINE HEIGHT............................... 86" APPROXIMATE MACHINE WEIGHT............................... 1,000 LBS
|
🔒 Subscribe | |
|
|
KITAGAWA | B-15 |
KITAGAWA B-15 15" CHUCK AS PICTURED
|
🔒 Subscribe | |
|
|
STARRETT | GRANITE SURFACE PLATE 36 X 24 X 6, GRADE B |
STARRETT GRANITE SURFACE PLATE 36 X 24 X 6, GRADE B PLATE# 007004
|
🔒 Subscribe | |
|
|
CAT50 TOOLHOLDERS - CAT 50 TOOLHOLDERS APPROXIMATELY 40 TOOLHOLDERS (AS PICTURED)
|
🔒 Subscribe | |||
|
|
CAT40 TOOLHOLDERS - CAT 40 TOOLHOLDERS APPROXIMATELY 50 TOOLHOLDERS (AS PICTURED)
|
🔒 Subscribe | |||
|
|
BUCK FORKARDT | 3 JAW CHUCK |
24 BUCK FORKARDT 3 JAW CHUCK
|
🔒 Subscribe | |
|
|
18 3-JAW CHUCK |
18 3-JAW CHUCK - 18 3-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
18 4-JAW CHUCK |
18 4-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
18 4-JAW CHUCK |
18 4-JAW CHUCK - 18 4-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
13" CHUCK - 13" 4-JAW CHUCK
|
🔒 Subscribe | |||
|
|
9 6-JAW CHUCK |
9 6-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
15 SELF CENTERING 3 JAW CHUCK |
15 SELF CENTERING 3 JAW CHUCK
|
🔒 Subscribe | ||
|
|
HARDINGE-SJOGREN | NO. 5C 10" SPEED COLLET CHUCK |
HARDINGE-SJOGREN NO. 5C 10" SPEED COLLET CHUCK. AS PICTURED
|
🔒 Subscribe | |
|
|
LOT OF MISC. THREADING AND GROOVING TOOL HOLDERS - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
MTHOR | 20 66 |
LOT OF MISC. THREADING AND GROOVING TOOLHOLDERS, INCLUDING MTHOR-20 66 AND MTVOL 20-66D-A .
|
🔒 Subscribe | |
|
|
INGERSOLL | V MAXX |
INGERSOLL V MAXX 4-1/2" SIZE CUTTING TOOLS
|
🔒 Subscribe | |
|
|
INGERSOLL |
LOT OF (3) CUTTING TOOLS, VARIOUS SIZES INCLUDING INGERSOLL BRAND
|
🔒 Subscribe | ||
|
|
INGERSOLL |
INGERSOLL CUTTING TOOLS, VARIOUS SIZES
|
🔒 Subscribe | ||
|
|
ARBOR PRESS AS PICTURED
|
🔒 Subscribe | |||
|
|
12" CHUCK - 12" CHUCK AS PICTURED
|
🔒 Subscribe | |||
|
|
10 3-JAW CHUCK |
10 3-JAW CHUCK - 10 3-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
12 MACHINE VISE - 12 MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
HURCO | 707-1010-293, 707-1010-292, SYIC-21003-45, CAT40-MAS-I |
HURCO RETENTION KNOBS AND CATAPULT HEADS P/N 707-1010-293 RETENTION KNOB KIT, CTS P/N 707-1010-292 RETENTION KNOB KIT, CTS SYIC-21003-45 CAT PULL STUDS CAT40-MAS-I AS PICTURED
|
🔒 Subscribe | |
|
|
D-ANDREA | TA-120 |
D-ANDREA TA-120 AUTOMATIC BORING AND FACING HEAD WITH AVAILABLE MANUALS AND CASE.
|
🔒 Subscribe | |
|
|
SPIN INDEXER - AS PICTURED
|
🔒 Subscribe | |||
|
|
GRINDER - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF (3) ANGLE PLATES - LOT OF ANGLE PLATES (1) 9 X 12 X 8 (1) 4 X 4 X 6 (1) 6 X 8 X 6
|
🔒 Subscribe | |||
|
|
KUB | TRIGN ABS 50 |
KUB TRIGN ABS 50 DRILL
|
🔒 Subscribe | |
|
|
LOT OF CUTTING TOOLS VARIOUS SIZES - LOT OF CUTTING TOOLS, VARIOUS SIZES - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF MISC. TOOLING AND INSERTS - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF MISC. INSERTS - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF MISC. INSERTS - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF MISC. TOOLING - AS PICTURED
|
🔒 Subscribe | |||
|
|
LOT OF MISC. TOOLING - AS PICTURED
|
🔒 Subscribe | |||
|
|
MISC. DRILLS - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
MACHINE VISE - AS PICTURED
|
🔒 Subscribe | |||
|
|
8 4-JAW CHUCK |
8 4-JAW CHUCK - 8 4-JAW CHUCK - AS PICTURED
|
🔒 Subscribe | ||
|
|
LOT OF MISC. TOOLING AND INSERTS - AS PICTURED
|
🔒 Subscribe | |||
|
|
KENNAMETAL |
KENNAMETAL TOOL HOLDER
|
🔒 Subscribe | ||
|
|
MISC. TOOLING - AS PICTURED
|
🔒 Subscribe |
1991 OKUMA LB-45II
CNC MACHINE CENTERS
1991 OKUMA LB-45II CNC LATHE SWING: 35.43" TURNING DIAMETER: 25.98" CENTER DISTANCE: 82" SPINDLE BOR...
Hammer Price:
🔒
2004 KAFO VMC-15800
CNC MACHINE CENTERS
2004 KAFO VMC-15800 VERTICAL MACHINING CENTER X-AXIS TRAVEL: 59.055" Y-AXIS TRAVEL: 31.5" Z-AXIS TRA...
Hammer Price:
🔒
1995 HAAS VF-0
CNC MACHINE CENTERS
1995 HAAS VF-0 CNC VERTICAL MACHINING CENTER TRAVELS: X-AXIS: 20 Y-AXIS: 16 Z-AXIS: 20 RAPID TRAVERS...
Hammer Price:
🔒
2001 OKUMA CROWN L1420
CNC MACHINE CENTERS
2001 OKUMA CROWN L1420 MAX SWING OVER BED ..................................... 28" MAX SWING OVER S...
Hammer Price:
🔒
2014 ELECTRO ARC DC TABLETOP METAL DISINTEGRATOR
METALWORKING & FABRICATION EQUIPMENT
2014 ELECTRO ARC DC TABLETOP METAL DISINTEGRATOR WORK TOP 40 X 32 (1020 X 820MM) CAPACITY: 4000 LB (...
Hammer Price:
🔒
BROWN & SHARPE REFLEX 454
TEST, MEASUREMENT & QUALITY EQUIPMENT
BROWN & SHARPE REFLEX 454 CMM (DESK INCLUDED) WORK CAPACITY (X-AXIS)...................................
Hammer Price:
🔒
KITAGAWA B-15
METALWORKING & FABRICATION EQUIPMENT
KITAGAWA B-15 15" CHUCK AS PICTURED...
Hammer Price:
🔒
STARRETT GRANITE SURFACE PLATE 36 X 24 X 6, GRADE B
TEST, MEASUREMENT & QUALITY EQUIPMENT
STARRETT GRANITE SURFACE PLATE 36 X 24 X 6, GRADE B PLATE# 007004...
Hammer Price:
🔒
MISC
CAT50 TOOLHOLDERS - CAT 50 TOOLHOLDERS APPROXIMATELY 40 TOOLHOLDERS (AS PICTURED)...
Hammer Price:
🔒
MISC
CAT40 TOOLHOLDERS - CAT 40 TOOLHOLDERS APPROXIMATELY 50 TOOLHOLDERS (AS PICTURED)...
Hammer Price:
🔒
BUCK FORKARDT 3 JAW CHUCK
METALWORKING & FABRICATION EQUIPMENT
24 BUCK FORKARDT 3 JAW CHUCK...
Hammer Price:
🔒
HARDINGE-SJOGREN NO. 5C 10" SPEED COLLET CHUCK
METALWORKING & FABRICATION EQUIPMENT
HARDINGE-SJOGREN NO. 5C 10" SPEED COLLET CHUCK. AS PICTURED...
Hammer Price:
🔒
MTHOR 20 66
MISC
LOT OF MISC. THREADING AND GROOVING TOOLHOLDERS, INCLUDING MTHOR-20 66 AND MTVOL 20-66D-A ....
Hammer Price:
🔒
INGERSOLL
POWER AND HAND TOOLS
LOT OF (3) CUTTING TOOLS, VARIOUS SIZES INCLUDING INGERSOLL BRAND...
Hammer Price:
🔒
HURCO 707-1010-293, 707-1010-292, SYIC-21003-45, CAT40-MAS-I
MISC
HURCO RETENTION KNOBS AND CATAPULT HEADS P/N 707-1010-293 RETENTION KNOB KIT, CTS P/N 707-1010-292 R...
Hammer Price:
🔒
D-ANDREA TA-120
METALWORKING & FABRICATION EQUIPMENT
D-ANDREA TA-120 AUTOMATIC BORING AND FACING HEAD WITH AVAILABLE MANUALS AND CASE....
Hammer Price:
🔒
MISC
LOT OF (3) ANGLE PLATES - LOT OF ANGLE PLATES (1) 9 X 12 X 8 (1) 4 X 4 X 6 (1) 6 X 8 X 6...
Hammer Price:
🔒
MISC
LOT OF CUTTING TOOLS VARIOUS SIZES - LOT OF CUTTING TOOLS, VARIOUS SIZES - AS PICTURED...
Hammer Price:
🔒