Nutra Equipment TXFL

2005 RAYMOND SB CSR30T ELECTRIC FORKLIFT NARROW AISLE ELECTRIC FORKLIFT WITH THE MAXIMUM PAYLOAD CAPACITY OF 3,000 LBS. FORKLIFT IS OPERATED WITH A 48V BATTERY (BATTERY IS INCLUDED). MAX WEIGHT IS 17,020 LBS. WITH BATTERY, MAX WEIGHT WITHOUT BATTERY IS 13,520 LBS. MAX HEIGHT EXTENDED REACH IS 419 ( 3.9' ) , HRS 5900 S/N:Z518002011TM01

FOGG FILLER LIQUID MONOBLOCK FAA3618 MFR: FOGG MODEL: 561-70-11-93-RH

10 CU FT V- BLENDER W/ INTENSIFER BAR - 10 CUBIC FOOT V- BLENDER WITH INTENSIFIER BAR VOLTS: 380 AMPS: 15 DIAMETER: 8 14

2015 COUNTEC CT-CO-120 AUTOMATIC COTTONER VOLTS: 220 PHASE: 1 HERTZ: 60 S/N: CT-CO-046

AUTOMATIC BOTTLE SHRINK LABELING MACHINE(SL-150) MODEL: SL-150 PRODUCTION SPEED: 150B/M(ADJUSTABLE) BOTTLE DIAMETER: 25MM -125MM (SPECIAL BOTTLE, SPECIAL DESIGN) BOTTLE HEIGHT: 30MM-350M BOTTLE SHAPE: ROUND, SQUARE, ELLIPTIC, RECTANGULAR ETC LABEL LENGTH: 30MM -250MM LABEL THICKNESS: 0.03MM - 0.13MM MAIN MACHINE POWER: 2.5KW OVERALL DIMENSIONS: 90"LONG X 42"DEEP X 81" TALL

THERMO SCIENTIFIC ULTIMATE 3000 HPLC SKIDDING

EPAK 3 SPINDLE RETORQUER VOLTS: 115 HERTZ: 50-60 AMPS:19.5

PATTERSON KELLEY 20 CUBIC FOOT V-BLENDER STAINLESS STEEL CONSTRUCTION BOTTOM PORT DIMENSIONS: 8.25"

PATTERSON KELLEY 20 CUBIC FOOT V-BLENDER BOTTOM PORT DIMENSIONS: 8.25" STAINLESS STEEL CONSTRUCTION

CHADAM HORIZONTAL TRANSFER CONVEYOR - 2 KBMD PENTA DRIVE VARIABLE SPEED BELT CONTROLS - ADJUSTABLE HEIGHT AND WIDTH - VOLT: 110

STEAM SHRINK TUNNEL MODEL: DC- 2000P VOLTS: 220 INPUT POWER OF STEAM GENERATOR: 380 VOLTS HERTZ: 50 WORKING PRESSURE: 0.1 MPA WEIGHT: 230 KG STEAM CONSUMPTION: 10-20KG/H CONVEYING SPEED: 0-35 MIN TUNNEL DIMENSIONS: 6' LONG X 2' WIDE X 5 1/2' TALL - CONVEYOR IS 162" LONG X 4" WIDE

2017 BEIJING XINHANGCHENG PLG-I-500 INGREDIENT TANK 500 LITERS TYPE: PLG-I-500 CAPACITY: 500L KW: 4 VOLTS: 480 HZ: 60 STIRRING SPEED: 48 RPM PRODUCT NUMBER: 2017071158 DATE: 2017-7 WORKING TEMPERATURE INSIDE THE TANK: 0-100C JACKET WORKING PRESSURE: 0.02-0.09 MPA JACKET TEST PRESSURE: 0.3-0.4 MPA THE SEAL CAN BE USED CONTINUOUSLY FOR MORE THAN 3000 HOURS GEARED MOTOR TYPE: GSF77-Y4-4P-35.94-M5-90 VOLTS: 480 HZ: 60 NO.: 01170709094 RATIO: 35.94 OIL: L-CKE/P680 WEIGHT: 88 KG S/N: 2017071158 THE MIXING TANK IS A VERTICAL TANK IN WHICH THE AGITATOR MIXERS THE MATERIAL TO MEET THE TECHNICAL STANDARD. THE MIXING TANK ADOPTS VERTICAL CIRCULAR TANKS, BOTH TOP AND BOTTOM ARE STANDARD OVALS AND A SPHERICAL HEAD. THE TRANSITION SECTION IN-TANK USES CIRCULAR ARE TRANSITION, WITHOUT DEAD CORNER, EASY TO CLEAN. SINGLE-LAYER, DOUBLE LAYER(INSULATION FOR THE TANK AND BOTTOM HEAD) OR JACKET(TANK AND BOTTOM HEAD HAVE JACKET AND INSULATION) IS EQUIPPED WITH MECHANICAL STIRRING ACCORDING TO CUSTOMERS REQUIREMENTS. THE DOUBLE-BLADE MIXING PADDLE IS DRIVEN BY THE X SERIES CYCLOIDAL PINWHEEL REDUCER. IT RUNS SMOOTHLY, HAS LOW NOISE, AND HAS A STABLE WORKING PERFORMANCE. THE INNER TANK AND ALL PARTS OF THE TANK ARE POLISHED.

SOFT GEL EXTRACTOR AUGER SCREW GENERAL INFORMATION: SOFT GEL CAPSULES ARE DOSAGE FORMS THAT HAVE AN OBLONG AND SMOOTH CASING THAT ENCAPSULATES A LIQUID. THE SOFT GEL CASING (OR GEL-MASS) IS FORMULATED BY MIXING TOGETHER GELATIN (OR ALTERNATIVE MATERIAL) WITH WATER, PLASTICIZER, AND OTHER INGREDIENTS. HISTORICALLY, SOFT GEL CASINGS HAVE BEEN PREPARED IN A BATCH MIXING OPERATION THAT TAKES MANY HOURS TO COMPLETE.

AIR SHOWER SKIDDING AND LOAD OUT CHARGES: LOADING AND SKIDDING CHARGES WILL BE ADDED TO YOUR PURCHASE AT MARKET RATES FOR YOUR CONVENIENCE.

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

CONVEYOR WITH MOTOR AND CONTROLLER 10' X 8'' CONTROLLER: DELTA MS300

OMEGA H-1-18 CAP ELEVATOR FEATURES 7' DISCHARGE HEIGHT, CABINET ENCLOSED STAINLESS STEEL HOPPER WITH REMOVABLE SERVICE PANELS AND HINGED ACRYLIC COVER, 8' DISCHARGE AT PEAK OF THE ELEVATOR, 12" WIDE WHITE NEOPRENE BELT WITH 2" HIGH CLEATS ON 9" CENTERS, BELT DRIVEN BY DC DRIVE WITH GEAR REDUCER (CONTROLLER NEEDED FOR INDEPENDENT USE). MOUNTED ON FOUR THREADED LEVELING FEET. FORMERLY USED IN PHARMACEUTICAL PACKAGING.

BENCHTOP PISTON FILLER (5 AND 6 ON SAME SKID) OVERALL DIMENSIONS: 48"LENGTH X 40"WIDE X 36" TALL

2016 IPS T-62 HEAT TUNNEL 3 PHASE VOLTS: 360 HERTZ: 60 AMPS: 22 S/N: 24500

PORTABLE CONVEYOR 14' X 4 1/2'' WITH VFD

GENERIC CONVEYOR 19' X 4 1/2'' SANITARY BUILD. MODEL: PACK OFF TABLE SERIAL NUMBER: 13 7705-7

CONVEYOR 9' X 6 /12'' WITH VARIABLE SPEED CONTROL LEESON SPEEDMASTER AC MOTOR VARIABLE SPEED CONTROLLER

INCLINE CONVEYOR 8' X 12'' WITH VARIABLE SPEED DRIVE AND CONTROLLER

ACCU-STALTIC METERING PUMP OVERALL DIMENSIONS: 36"LONG X 30"WIDE X 54" TALL S/N: 10298

SHOP FOX W1687 DUST COLLECTOR MOTOR: 3 HP AIRFLOW CAPACITY: 2830 CFM IMPELLER SIZE: 13 IN. FILTRATION: 2.5 MICRON FILTER SIZE: 19 IN. X 33 IN. BAG INTAKE PORT(S): 4 X 4 IN. SOUND RATING: OVERALL HEIGHT: 78 IN.

CONVEYOR SEGMENT NO MOTOR NO BELT 9' X 8'

CONVEYOR 8'6'' X 4'' WITH VARIABLE SPEED CONTROL, DRIVE MOTOR, NO BELT POWER SUPPLY: 110V 1~

ASSORTED TABLES

2016 YENCHEN YC-OG-5 DRY GRANULATOR MACHINE NUMBER: OB320150159 CAPACITY: 300-400 KG/ HOUR POWER: 480 VOLTS 3 PHASE 60 HERTZ MOTOR: 3.7 KW

2021 GMV GMV - 800 GELATIN REACTOR 800L NO MEZZANINE CAPACITY: 800L PHASE: 3 VOLTS: 480 HERTZ: 60 S/N: 20211203

CHANG SUNG SOFTGEL SORTER SYSTEM 10 LANE FUNCTION: AUTOMATIC MECHANICAL SORTING ACCORDING TO THE DIAMETER PRODUCT: PHATMACEUTICAL INDUSTRY : SOFT GELATIN CAPSULE(ROUND, OBLONG)ETC. *OPTION : COATED TABLETS, TABLETS(ROUND AND OBLONG-SHAPED) SORTING: BY DIAMETER-DIASORT SYSTEM SORTING PRECISION: 0.1MM DIAMETER 0.05MM THICKNESS SORTING LIMIT SIZE: 0~24MM

STAINLESS STEEL ROLLER TOTE DIMENSIONS: TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE DIMENSIONS: TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

STAINLESS STEEL ROLLER TOTE TOP HATCH: 21" DIAMETER TANK: 24" X 48" DIAMETER CONE: 25" X 48" BOTTOM OUTLET: 13"

2012 BLIMAR 2040 AITT BLISTER PACKING MACHINES/N: 12187OVERALL DIMENSIONS: 48"LENGTH X 48"WIDTH X 60" TALL THIS BLISTER PACKING MACHINE HAS TWO HEATING PLATES OF 200 X 400 MM AND EACH ONE HAS INDEPENDENT TEMPERATURE CONTROLS. THE FIRST HEATING PLATE IS USED TO FORM THE BLISTER AND THE SECOND ONE SEALS THE BLISTER PACK. CONSEQUENTLY, IT IS POSSIBLE TO FORM AND SEAL AT DIFFERENT TEMPERATURES. THIS MACHINE IS THE BEST OPTION FOR PRODUCING ANY TYPE OF BLISTER PACK, SUCH AS, PLASTIC-CARTON, PLASTIC-ALUMINIUM, PLASTIC-TYVEK, PLASTIC-PLASTIC AND SPECIAL BLISTER PACKS.

ACCUMULATION TABLE 36'' WITH VARIABLE SPEED DRIVE DIMS: 38X38X33"

TRANSFER CONVEYOR WITH KBMD VARIABLE SPEED CONTROL CONVEYOR BELT DIMENSIONS: 5' LONG X 5" WIDE. VARIABLE SPEED CONTROLLED. STAINLESS STEEL CONSTRUCTION.

LIQUID TANK 200L STAINLESS STEEL CONSTRUCTION. CAPACITY: 200L ON CASTER WHEELS.

40 GALLON LIQUID TANK WITH AGITATION CAPACITY: 40 GALLONS BALDOR MOTOR: CAT. NO.: VM3558 SPEC.: 35A13-872 HP: 2 VOLTS: 208-230/460 AMPS: 6.5-6.2/3.1 RPM: 1725

YCQ 450 COMPLETE GUMMY LINE CAPACITY TO TURN OUT 400-450KG PER HOUR. INCLUDED IN THE LINE ARE THE KITCHEN, 500L MELTING KETTLE, 500L VACUUM JELLY COOKER, DEPOSITOR, PLC TOUCH SCREEN CONTROL WITH 6 FLAVOR DEPOSITING PUMP, TWO MIXER HOPPERS CAN PRODUCE BI-COLOR JELLY CANDY. ALL CONTACT MATERIAL IS STAINLESS STEEL. TWO COOLING TUNNELS 12FT EACH TOTALING IN 24FT SUGARCOATING DRUM, 6 - 8FT. 1000 PIECES OF GUMMY TRAYS. NEVER BEEN INSTALLED, ON ORIGINAL FACTORY SKIDS. STEAM PRESSURE: 0.65 MPA STEAM CONSUMPTION: 250KG PER HOUR COMPRESSOR AIR CONSUMPTION: 1.6 M/MIN COMPRESSOR AIR PRESSURE: 0.6 - 0.8 MPA WORKSHOP SIZE REQUEST: 22METER*8 METER WORKER QUANTITY: 4 WORKER

LOMA IQ2 METAL DETECTOR S/N: KIMD16585

ERWEKA KEA TABLET DEDUSTER VOLTS: 380 HZ: 60 S/N: 44583

2016 SGJ-II DRYING TUMBLERS TYPE: SGJ-II 36 DRYING TUMBLERS FOR SOFT GEL CAPACITY: 45 KG VOLTS: 480 KW: 0.75 SPEED: 29 R/MIN S/N: 15012 GENERAL INFORMATION: THE DRYING PROCESS REQUIRES AN ENVIRONMENT WITH LOW RELATIVE HUMIDITY IN THE AIR BUT NOT HOT AIR. THIS PROCESS IS DIVIDED INTO TWO STAGES: TUMBLE DRYING, AND AIR DRYING. THESE TUMBLERS TUMBLE THE SOFTGELS AROUND 30 TO 40 MINUTES AND REMOVE APPROXIMATELY 25 PERCENT OF THE WATER CONTENT IN THE SOFTGEL CAPSULES. THEN SOFTGEL CAPSULES ARE SPREAD ON STACKABLE TRAYS AND TRANSFERRED TO THE DRYING ROOM OR TUNNEL WHERE HIGH AIR FLOW EXISTS AND THEY STAY AROUND 24 TO 48 HOURS OR UNTIL THE SOFTGELS BECOME HARD ENOUGH. THIS PROCESS IS CALLED NATURAL MANUAL DRYING. FLUID BED DRYING CAN BE USED FOR SHAPE FORMING AND FINAL DRYING OF SOFT GEL CAPSULES. THE TUMBLER QUANTITY CAN BE CHOSEN AS THE PRODUCTION REQUIREMENT. EACH TUMBLER CAN ROTATE IN BOTH DIRECTORS. THE TUMBLER CAN BE CONTROLLED AUTOMATICALLY BY A PLC SYSTEM WITH AN ENCAPSULATION MACHINE WHEN CONNECTED TO THE MASTER STATION DURING THE FORMING PROCESS OR CONTROLLED MANUALLY DURING THE PRE-DRYING PROCESS. WATER CONTENT IN THE GELATIN FILM CAN BE REDUCED FROM 45% TO 35% DURING THE FORMING PROCESS, AND IT CAN BE DECREASED TO AROUND 25% IN THE PRE-DRYING PROCESS. DRY MODE: FLUID BED, THE SYSTEM CAN BLOW THE CAPSULE TO FLUIDIZED, WHICH MINIMIZES THE FRICTION BETWEEN THE CAPSULES AND THE INNER SURFACE OF THE TUMBLER. INCREASE MUCH EFFECTIVELY OF DRYING. FEATURE OF THE MACHINE: 1. THE DRYING SYSTEM USE SMALLER SPACE. THE DOUBLE FLOORS CONSTRUCTION IS APPLIED TO THE SYSTEM; KEEP TO FULLYUSING OF PRESENT DRYING WORKSHOP, AND JUST NEED HALF OF SPACE THAN OLDER DRYING SYSTEM. THAT SAVE USERSWORKSHOP SPACE; ONE SET OF SOFT CAPSULE PRODUCTION LINE JUST ADOPTED ONE SET OF DOUBLE FLOOR DRYER. 2. THE SPECIAL RIDING WHEEL IS DESIGNED FOR TUMBLER. THAT KEEP TUMBLER EASY TO FIXED AND DISASSEMBLED FROMTHE SHELVES. OPERATOR JUST NEED TO USE HAND CAN LOOSEN THE RIDING WHEELS AND ROUND THE TUMBLERS OUT OFSHELVES. REDUCE THE WORKING POWER OF OPERATOR TO FIX AND DISASSEMBLE TUMBLERS. 3. UNIFORM DRYING, HIGH EFFECTIVE DRYING, AND NOT ADHESION. 4. THE WORK ENVIRONMENT KEEP IN COMFORTABLE AND THE PARTS, WHICH IS TOUCH WITH SOFT CAPSULE, ARE GOODQUALITY SUS, FIXED TO GMP AND FDA STANDARD. 5. SPECIAL HORIZONTAL AIR BLOW, HAVE MORE DRYING EFFECT THAN VERTICAL AIR BLOWING

2017 BEIJING XINHANGCHENG GJT-200 GLUE KETTLE: TYPE: GJT-200; CAPACITY: 200 L; WORKING PRESSURE: < 0.08 MPA; HEATING POWER: 2 KW; S/N: 2017071862; MFG. DATE: 2017-07; TEMP. RANGE: 0-100 DEGREES C; VOLTAGE: 240; HZ: 60; GENERAL INFORMATION: A GELATIN SERVICE TANK IS THAT EQUIPMENT WHOSE PURPOSE IS TO STORE GELATIN MASS AT A CONVENIENT TEMPERATURE. THE GELATIN SERVICE TANK ALSO ACTS AS A HOLDING TANK FOR THE GELATIN MASS BEFORE PASSING TO THE ENCAPSULATION MACHINE. ANOTHER REASON A GELATIN SERVICE TANK IS NEEDED IS THAT DURING THE PRODUCTION OF GELATIN SOFTGEL CAPSULES, YOU NEED TO RELEASE THE GELATIN SYSTEMATICALLY. THE GELATIN SERVICE TANK SERVES THE PURPOSE OF HOLDING THE GELATIN AS THEY FLOW DURING THE ENCAPSULATION PROCESS. THIS ALLOWS FOR CONTINUOUS PRODUCTION WHILE AT THE SAME TIME CONTROLLING THE GELATIN FLOW.

2016 GELATIN BIO REACTOR NO MEZZANINE VACUUM PRESSURE IN THE VESSEL: 0.02-0.09 MPA. WORKING PRESSURE IN THE VESSEL: 0.03-0.05 MPA. EXAMINING PRESSURE IN THE VESSEL: 0.3-0.4 MPA. WORKING PRESSURE IN THE JACKET: 0.03-0.098 MPA WORKING TEMPERATURE IN TANK: 50-100 C CONVEYOR GRANULE: 30 CP SEALING PARTS AND RING CAN BE USED FOR MORE THAN 3,000 CONTINUOUS HOURS THE INSULATING LAYER USES SUPER-FINE GLASS COTTON. INNER VESSEL AND INSULATION LAYER (COVERED LAYER) OF THE TANK, THOSE SECTIONS EXPOSED TO RAW MATERIALS ARE MADE OF 1CR18NI9TI STAINLESS STEEL. THE JACKET OF THE GDU USES HIGH-QUALITY STEEL. THE GDU AND ALL STAINLESS STEEL PARTS ARE WELL-POLISHED. AFTER INGREDIENTS ARE COMBINED, THE MIXTURE IS PLACED INTO A REACTOR CALLED A GELATIN MELTER. THE REACTOR SURROUNDED BY A THERMAL JACKET HEATS THE MIXTURE WHILE A VERY HIGH TORQUE TURBINE MIXER STIRS IT UNDER VACUUM. AT THIS STAGE, APPROXIMATELY 20% OF GELATIN MIXTURE CONSISTS OF WATER. BIOREACTOR DESIGN IS A RELATIVELY COMPLEX ENGINEERING TASK, WHICH IS STUDIED IN THE DISCIPLINE OF BIOCHEMICAL/BIOPROCESS ENGINEERING. UNDER OPTIMUM CONDITIONS, THE MICROORGANISMS OR CELLS ARE ABLE TO PERFORM THEIR DESIRED FUNCTION WITH A LIMITED PRODUCTION OF IMPURITIES. THE ENVIRONMENTAL CONDITIONS INSIDE THE BIOREACTOR, SUCH AS TEMPERATURE, NUTRIENT CONCENTRATIONS, PH, AND DISSOLVED GASES (ESPECIALLY OXYGEN FOR AEROBIC FERMENTATION) AFFECT THE GROWTH AND PRODUCTIVITY OF THE ORGANISMS. THE TEMPERATURE OF THE FERMENTATION MEDIUM IS MAINTAINED BY A COOLING JACKET, COILS, OR BOTH. PARTICULARLY EXOTHERMIC FERMENTATIONS MAY REQUIRE THE USE OF EXTERNAL HEAT EXCHANGERS. NUTRIENTS MAY BE CONTINUOUSLY ADDED TO THE FERMENTER, AS IN A FED-BATCH SYSTEM, OR MAYBE CHARGED INTO THE REACTOR AT THE BEGINNING OF FERMENTATION. RSQ II COIL PIPE TYPE WATER HEATER MODEL: RSQ-II VOLUME: 300 L TEMP. CONTROL RANGE: 0-100 DEGREES C MFG. DATE: 2016-03 PRODUCT CODE: 160308 HOT WATER VOLUME: 2,000 KGS/H POWER CONSUMPTION: 18 KW; 380V; 3 PHASE WORKING TEMPERATURE: 85-100 C WEIGHT: 350 KGS DIMENSION: EXTERNAL . 700 X H 2,100 MM REMARK: TO SAVE ENERGY, THE HEATER CAN BE MODIFIED AS A STEAM HEATING TYPE. THE TANK IS ONE OF THE ESSENTIAL AUXILIARY EQUIPMENT FOR WATER-BATH GELATIN DISSOLVING UNIT DURING THE GELATINDISSOLVING PROCESS. AS A ESSENTIAL HEATING MODE DURING SOFTGEL ENCAPSULATION PROCESS, WATER-BATH HELPS TOKEEP THE VISCOSITY OF THE GELATIN LIQUID; YET THE VISCOSITY OF GELATIN LIQUID COULD ONLY BE STABLE UNDER CONSTANTTEMP. AT 90-100C. THE TANK MEETS THE ABOVE REQUIREMENT BY A SERIES OF SPECIAL DESIGN: SERPENTINE HEATING,DESIGN ENSURE RECYCLED USE OF HOT WATER; OUTER TANK LAYER IS COVERED BY SUPER-FINE GLASS COTTON INSULATIONLAYER; AND THE OUTER COVER IS SEALED WITH HIGH QUALITY STAINLESS STEEL. THE TANK FEATURES CONVENIENT CLEANINGAND GOOD INSULATION FUNCTION AND IS PROFESSIONAL ENERGY-SAVING HEAT EXCHANGE EQUIPMENT. LNG-II VACUUM CONDENSATION TANK TYPE: LNG-II CONDENSATION AREA (M2): 60 VACUUM (MPA): =/< 0.09 SIZE AND SHAPE (MM): 400X1750 PRODUCT NUMBER: 160110 EX FACTORY DATE: 2016-1-18

2017 BEIJING SINAGEL TRTS-WR GELATIN COLORING MACHINE VOLTS: 480 HZ: 60 PHASE: 3 CONTACT PART: 316L WORKING CONDITION: N.T.P. MOTOR POWER: 7.5 KW ROTATING SPEED: 0-1440R/MIN HYDRAULIC POWER: 0.75 KW HYDRAULIC STROKE: 700MM S/N: 2017458 EX-FACTORY DATE: 2017.07 GENERAL INFORMATION GELATIN PIGMENT COLORING MACHINES ARE DESIGNED TO MIX PIGMENT OF DIFFERENT COLORS SO THAT IT GIVES SOFT GEL CAPSULES OR PAINTBALL A MORE APPEALING LOOK. IT IS A VERY USEFUL AND HANDY DEVICE IN SOFTGEL ENCAPSULATION PRODUCTION LINE. PIGMENT MIXING TANK ADOPTS THE ADVANCED LIQUID GELATIN COLORING TECHNOLOGY ACCORDING TO THE GELATINOUS PROPERTY. IT CONSISTS OF THE HYDRAULIC LIFTING AND LOWERING FUNCTION, MIXER WITH FREQUENCY INVERTER. THE MACHINE IS OF SIMPLE OPERATION, STABILITY, HIGH EFFICIENCY, CONVENIENT CLEANING, AND MAINTENANCE.