• Items
  • Auctions
  • Auctioneers
  • Items
  • Auctions
  • Auctioneers

Precision Machined Parts Component Manufacturer Sterling Technologies

Integra Asset Solutions
Category: CNC MACHINE CENTERS
Total Lots: 237
Total Sales: 🔒 Subscribe
Lot Price Distribution
🔒
Subscribe to view
Unlock price distribution and full auction analytics
Sort:
Showing 1–50 of 237 lots
Year Make Model Lot Description Hammer Price
2016 OKUMA GENOS M560-V 2016 OKUMA GENOS M560-V
2016 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 13.78 TO 31.89, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ EXTENDED COLUMN, OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (APPROX. DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 17415, OPERATING 12190, CUTTING 9157, NOT OPERATING 5224, INPRO SETUP 5224, SPINDLE RUN 10585 S/N: 195630
2016 · OKUMA · GENOS M560-V
 🔒 Subscribe
2016 OKUMA GENOS M560V 2016 OKUMA GENOS M560V
2016 OKUMA GENOS M560V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 13.78 TO 31.89, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ EXTENDED COLUMN, OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (APPROX. DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 18036, OPERATING 12490, CUTTING 9111, NOT OPERATING 5545, INPRO SETUP 5545, SPINDLE RUN 10822 S/N: 193770
2016 · OKUMA · GENOS M560V
 🔒 Subscribe
2019 OKUMA GENOS M560-V 2019 OKUMA GENOS M560-V
2019 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 5.91 TO 24.02, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 10141, OPERATING 7144, CUTTING 5334, NOT OPERATING 2996, INPRO SETUP 2996, SPINDLE RUN 6303 S/N: 219533
2019 · OKUMA · GENOS M560-V
 🔒 Subscribe
2008 AGIECHARMILLES CUT 30 2008 AGIECHARMILLES CUT 30
2008 AGIECHARMILLES CUT 30 CNC WIRE-TYPE EDM, MAX WORKPIECE WEIGHT: 2,200-LB, TRAVELS: X-23.6 INCH; Y-15.7 INCH; Z-13.8 INCH, WIRE DIAMETER: 0.15 TO 0.30MM, W/ AGIE CNC CONTROL, PENDANT CONTROL S/N: 006-007
2008 · AGIECHARMILLES · CUT 30
 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160
TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160776
TSUDAKOMA · TWA-160
 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160
TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160324
TSUDAKOMA · TWA-160
 🔒 Subscribe
2010 HAAS VF-3YT 2010 HAAS VF-3YT
2010 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, Y-26 INCH, Z-25 INCH, 15,000 RPM, CT40 SPINDLE TAPER, 40-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, 195/260 VOLT HOURS: POWER ON 3118, CYCLE START 3034, FEED CUTTING 22097 S/N: 1078632
2010 · HAAS · VF-3YT
 🔒 Subscribe
2011 HAAS VF-3YT 2011 HAAS VF-3YT
2011 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, Y-26 INCH, Z-25 INCH, 15,000 RPM, CT40 SPINDLE TAPER, 40-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, 195/260 VOLT HOURS: POWER ON 11490, CYCLE START 6972, FEED CUTTING 4373 S/N: 1088879
2011 · HAAS · VF-3YT
 🔒 Subscribe
HAAS TR210H HAAS TR210H
HAAS TR210H TRUNNION ROTARY TABLE
HAAS · TR210H
 🔒 Subscribe
OKAMOTO ACC16-24DX OKAMOTO ACC16-24DX
OKAMOTO ACC16-24DX GRIND-X 16 INCH X 24 INCH AUTOMATIC SURFACE GRINDER, 15.75 INCH X 23.5 INCH FINE POLE ELECTRO-MAGNETIC CHUCK, SBS DYNAMIC SB-4500 WHEEL BALANCING SYSTEM, OVER THE WHEEL DRESSER, COOLANT SYSTEM W/ PAPER FILTRATION, 230/460 VOLT S/N: 66387
OKAMOTO · ACC16-24DX
 🔒 Subscribe
2006 HAAS OM-2A 2006 HAAS OM-2A
2006 HAAS OM-2A 4-AXIS CNC VERTICAL MACHINING CENTER, TABLE: 10" X 20", TRAVELS: X-12"; Y-10"; Z-12", UP TO 30,000-RPM, ISO 20 SPINDLE TAPER, 20-POSITION ATC, WIRED FOR 4TH-AXIS, 240 VOLT (NOTE: 4TH-AXIS ROTARY SOLD SEPARATELY) S/N: 47343
2006 · HAAS · OM-2A
 🔒 Subscribe
2011 HAAS VF-2 2011 HAAS VF-2
2011 HAAS VF-2 4-AXIS CNC VERTICAL MACHINING CENTER, 16" X 36" TABLE, TRAVELS; X-30", Y-16", Z-20", 35,000 RPM, BT30 SPINDLE TAPER, 24-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH AXIS, CHIP AUGER, ROYAL FX900 MIST COLLECTOR, 380/460 VOLT S/N: 1065288
2011 · HAAS · VF-2
 🔒 Subscribe
2006 HAAS VF-2DTR 2006 HAAS VF-2DTR
2006 HAAS VF-2DTR 5-AXIS CNC VERTICAL MACHINING CENTER, 14" X 36" TABLE, TRAVELS: X-30", Y-16", Z-20", 7,500 RPM, CT40 SPINDLE TAPER, 24-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, TORIT MIST COLLECTOR, 20 HP VECTOR DUAL DRIVE, 208/230 VOLT S/N: 1050120
2006 · HAAS · VF-2DTR
 🔒 Subscribe
2005 HAAS TL-1 2005 HAAS TL-1
2005 HAAS TL-1 CNC TOOL ROOM LATHE, 1800-RPM, 16 INCH SWING, 30 INCH CENTERS, 8 INCH 3-JAW CHUCK, TAILSTOCK, DORIAN QUICK CHANGE TOOLPOST, 5C COLLET CLOSER, STEADY REST, HAAS CNC, COOLANT SYSTEM, 208/240 VOLT S/N: 69292
2005 · HAAS · TL-1
 🔒 Subscribe
2008 HAAS VF-2DYT 2008 HAAS VF-2DYT
2008 HAAS VF-2DYT 4-AXIS CNC VERTICAL MACHINING CENTER, 18" X 36" TABLE, TRAVELS; X-30"; Y-24"; Z-20", IBAG HF100-AI5DCF 55000-RPM SPINDLE, HSK32 TAPER, 20-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH AXIS, CHIP AUGER, ROYAL FX550 MIST COLLECTOR, 208/230 VOLT S/N: 1067072
2008 · HAAS · VF-2DYT
 🔒 Subscribe
2009 AGIECHARMILLES FORM 30 2009 AGIECHARMILLES FORM 30
2009 AGIECHARMILLES FORM 30 CNC SINKER-TYPE EDM, TRAVELS: X-23.6 INCH; Y-15.7 INCH; Z-15.7 INCH, TABLE: 23.5 INCH X 31.5 INCH, MAX WORKPIECE SIZE: 39.4 INCH X 27.6 INCH X 15.7 INCH, MAX WORKPIECE WEIGHT: 2,200-LB, W/ 3R SYSTEM CHUCK S/N: 005-001
2009 · AGIECHARMILLES · FORM 30
 🔒 Subscribe
HAAS SHRT210H HAAS SHRT210H
HAAS SHRT210H ROTARY TABLE, 210MM (8.3") PLATTER S/N: 224230
HAAS · SHRT210H
 🔒 Subscribe
FARO F04 FARO F04
FARO F04 PORTABLE COORDINATE MEASURING ARM WITH CART, 24 INCH X 36 INCH X 4 INCH BLACK GRANITE SURFACE PLATE S/N: F04-L2-05-03391
FARO · F04
 🔒 Subscribe
SYSTEM 3R D-30193 / 3R-60.360SA SYSTEM 3R D-30193 / 3R-60.360SA
SYSTEM 3R D-30193 / 3R-60.360SA ROTARY INDEXING TABLE
SYSTEM 3R · D-30193 / 3R-60.360SA
 🔒 Subscribe
2005 HAAS TM-2 2005 HAAS TM-2
2005 HAAS TM-2 4-AXIS VERTICAL MACHINING CENTER, TABLE: 10.5" X 57.75", TRAVELS: X-40"; Y-16"; Z-16", UP TO 4,000-RPM, CT40 SPINDLE TAPER, 20-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH-AXIS, 208/240 VOLT S/N: 39888
2005 · HAAS · TM-2
 🔒 Subscribe
ELBO CONTROLLI HATHOR SIX ELBO CONTROLLI HATHOR SIX
ELBO CONTROLLI HATHOR SIX TOOL PRESETTER, 40 TAPER & HSK63 SPINDLE HOLDERS, DYMO LABELWRITER PRINTER, CT40 CALIBRATION GAGE, HSK63 CALIBRATION GAGE S/N: 5895
ELBO CONTROLLI · HATHOR SIX
 🔒 Subscribe
HAAS TR160Y HAAS TR160Y
HAAS TR160Y TRUNNION ROTARY TABLE, 160MM (6.3 INCH) PLATTER S/N: 904233
HAAS · TR160Y
 🔒 Subscribe
HAAS SHRT160H HAAS SHRT160H
HAAS SHRT160H ROTARY TABLE, 160MM (6.3 INCH) PLATTER, TAILSTOCK S/N: 164214
HAAS · SHRT160H
 🔒 Subscribe
HAAS HRT110 HAAS HRT110
HAAS HRT110 ROTARY TABLE, 110MM (4.3") PLATTER S/N: 110020
HAAS · HRT110
 🔒 Subscribe
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD ELTOOL TIGHTSPOT RIGHT ANGLE HEAD
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD, MAX. 40,000 RPM S/N: H4667-1MG-3
ELTOOL · TIGHTSPOT RIGHT ANGLE HEAD
 🔒 Subscribe
TSUDAKOMA TWA-160G TSUDAKOMA TWA-160G
TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190040
TSUDAKOMA · TWA-160G
 🔒 Subscribe
HAAS STR160H HAAS STR160H
HAAS STR160H TRUNNION ROTARY TABLE, 160MM (6.3") PLATTER S/N: 901557
HAAS · STR160H
 🔒 Subscribe
KURT CL2D4 2A KURT CL2D4 2A
KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS
KURT · CL2D4 2A
 🔒 Subscribe
KURT CL2D4 2A KURT CL2D4 2A
KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS
KURT · CL2D4 2A
 🔒 Subscribe
TSUDAKOMA TWA-160G TSUDAKOMA TWA-160G
TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190039
TSUDAKOMA · TWA-160G
 🔒 Subscribe
KURT CT2SH4A KURT CT2SH4A
KURT CT2SH4A CLUSTER TOWER
KURT · CT2SH4A
 🔒 Subscribe
KURT CT2SH4A KURT CT2SH4A
KURT CT2SH4A CLUSTER TOWER
KURT · CT2SH4A
 🔒 Subscribe
STARRETT EZ612-5-300 STARRETT EZ612-5-300
STARRETT EZ612-5-300 OPTICAL MEASURING MACHINE, QUADRA-CHEK 300 VIDEO EDGE DETECTION & CROSSHAIR SYSTEM S/N: EZ-0244-1041-1007
STARRETT · EZ612-5-300
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
MITEE-BITE VM300 MITEE-BITE VM300
MITEE-BITE VM300 VACMAGIC VACUUM CHUCK
MITEE-BITE · VM300
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE
5TH AXIS · V562
 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160
10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES
TSUDAKOMA · TWA-160
 🔒 Subscribe
STARRETT STARRETT
STARRETT 36 INCH X 36 INCH X 6 INCH PINK GRANITE SURFACE PLATE W/ ROLLER CABINET BASE
STARRETT
 🔒 Subscribe
V562 V562
5TH-AXIS V562 5-INCH SELF CENTERING MACHINE VISE
V562
 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160
10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES
TSUDAKOMA · TWA-160
 🔒 Subscribe
HAAS SH5CSB HAAS SH5CSB
HAAS SH5CSB SINGLE SPINDLE 5C INDEXER S/N: 509312
HAAS · SH5CSB
 🔒 Subscribe
Equipment
38 INCH X 32 INCH X 76 INCH HIGH DOUBLE SIDED CANTILEVER RACK W/ CONTENTS, 12 INCH SUPPORT ARMS
🔒 Subscribe
SKAT BLAST 960 DLX SKAT BLAST 960 DLX
SKAT BLAST 960 DLX BLAST CABINET, 46 X 28 X 28 WORK AREA, DUST COLLECTOR
SKAT BLAST · 960 DLX
 🔒 Subscribe
KURT 3600V KURT 3600V
KURT 3600V 6 INCH MACHINE VISE
KURT · 3600V
 🔒 Subscribe
Year Make Model Description Price
2016 OKUMA GENOS M560-V 2016 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 13.78 TO 31.89, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ EXTENDED COLUMN, OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (APPROX. DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 17415, OPERATING 12190, CUTTING 9157, NOT OPERATING 5224, INPRO SETUP 5224, SPINDLE RUN 10585 S/N: 195630 🔒 Subscribe
2016 OKUMA GENOS M560V 2016 OKUMA GENOS M560V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 13.78 TO 31.89, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ EXTENDED COLUMN, OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (APPROX. DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 18036, OPERATING 12490, CUTTING 9111, NOT OPERATING 5545, INPRO SETUP 5545, SPINDLE RUN 10822 S/N: 193770 🔒 Subscribe
2019 OKUMA GENOS M560-V 2019 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34"; Y-22.05"; Z-18.11", SPINDLE NOSE TO TABLE TOP: 5.91 TO 24.02, MAX TABLE LOAD: 1980-LBS, SPINDLE SPEED: UP TO 15,000-RPM, CAT 40 TAPER, 30-HP SPINDLE MOTOR, W/ OSP P300MA THINC CONTROL, 32-POSITION ATC, RENISHAW RMP400/RTS CAT AUTO GAUGING SYSTEM, 4TH & 5TH AXIS INTERFACE, MP SYSTEMS RF-8 HIGH-PRESSURE COOLANT PUMP, 1000-PSI THROUGH SPINDLE COOLANT, SHOWER COOLANT, CHIP COUNTERMEASURES FOR OPERATOR DOOR, LNS MICROHINGE 250 CHIP CONVEYOR, EXOMIST HPM-C700 MIST COLLECTOR, AUTO LUBE SYSTEM, 220/480-VOLT (DIMENSIONS (W/O CHIP CONVEYOR): 101X126X108; 17,820-LBS) HOURS: RUNNING 10141, OPERATING 7144, CUTTING 5334, NOT OPERATING 2996, INPRO SETUP 2996, SPINDLE RUN 6303 S/N: 219533 🔒 Subscribe
2008 AGIECHARMILLES CUT 30 2008 AGIECHARMILLES CUT 30 CNC WIRE-TYPE EDM, MAX WORKPIECE WEIGHT: 2,200-LB, TRAVELS: X-23.6 INCH; Y-15.7 INCH; Z-13.8 INCH, WIRE DIAMETER: 0.15 TO 0.30MM, W/ AGIE CNC CONTROL, PENDANT CONTROL S/N: 006-007 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160776 🔒 Subscribe
TSUDAKOMA TWA-160 TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160324 🔒 Subscribe
2010 HAAS VF-3YT 2010 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, Y-26 INCH, Z-25 INCH, 15,000 RPM, CT40 SPINDLE TAPER, 40-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, 195/260 VOLT HOURS: POWER ON 3118, CYCLE START 3034, FEED CUTTING 22097 S/N: 1078632 🔒 Subscribe
2011 HAAS VF-3YT 2011 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, Y-26 INCH, Z-25 INCH, 15,000 RPM, CT40 SPINDLE TAPER, 40-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, 195/260 VOLT HOURS: POWER ON 11490, CYCLE START 6972, FEED CUTTING 4373 S/N: 1088879 🔒 Subscribe
HAAS TR210H HAAS TR210H TRUNNION ROTARY TABLE 🔒 Subscribe
OKAMOTO ACC16-24DX OKAMOTO ACC16-24DX GRIND-X 16 INCH X 24 INCH AUTOMATIC SURFACE GRINDER, 15.75 INCH X 23.5 INCH FINE POLE ELECTRO-MAGNETIC CHUCK, SBS DYNAMIC SB-4500 WHEEL BALANCING SYSTEM, OVER THE WHEEL DRESSER, COOLANT SYSTEM W/ PAPER FILTRATION, 230/460 VOLT S/N: 66387 🔒 Subscribe
2006 HAAS OM-2A 2006 HAAS OM-2A 4-AXIS CNC VERTICAL MACHINING CENTER, TABLE: 10" X 20", TRAVELS: X-12"; Y-10"; Z-12", UP TO 30,000-RPM, ISO 20 SPINDLE TAPER, 20-POSITION ATC, WIRED FOR 4TH-AXIS, 240 VOLT (NOTE: 4TH-AXIS ROTARY SOLD SEPARATELY) S/N: 47343 🔒 Subscribe
2011 HAAS VF-2 2011 HAAS VF-2 4-AXIS CNC VERTICAL MACHINING CENTER, 16" X 36" TABLE, TRAVELS; X-30", Y-16", Z-20", 35,000 RPM, BT30 SPINDLE TAPER, 24-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH AXIS, CHIP AUGER, ROYAL FX900 MIST COLLECTOR, 380/460 VOLT S/N: 1065288 🔒 Subscribe
2006 HAAS VF-2DTR 2006 HAAS VF-2DTR 5-AXIS CNC VERTICAL MACHINING CENTER, 14" X 36" TABLE, TRAVELS: X-30", Y-16", Z-20", 7,500 RPM, CT40 SPINDLE TAPER, 24-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH & 5TH AXIS, CHIP AUGER, TORIT MIST COLLECTOR, 20 HP VECTOR DUAL DRIVE, 208/230 VOLT S/N: 1050120 🔒 Subscribe
2005 HAAS TL-1 2005 HAAS TL-1 CNC TOOL ROOM LATHE, 1800-RPM, 16 INCH SWING, 30 INCH CENTERS, 8 INCH 3-JAW CHUCK, TAILSTOCK, DORIAN QUICK CHANGE TOOLPOST, 5C COLLET CLOSER, STEADY REST, HAAS CNC, COOLANT SYSTEM, 208/240 VOLT S/N: 69292 🔒 Subscribe
2008 HAAS VF-2DYT 2008 HAAS VF-2DYT 4-AXIS CNC VERTICAL MACHINING CENTER, 18" X 36" TABLE, TRAVELS; X-30"; Y-24"; Z-20", IBAG HF100-AI5DCF 55000-RPM SPINDLE, HSK32 TAPER, 20-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH AXIS, CHIP AUGER, ROYAL FX550 MIST COLLECTOR, 208/230 VOLT S/N: 1067072 🔒 Subscribe
2009 AGIECHARMILLES FORM 30 2009 AGIECHARMILLES FORM 30 CNC SINKER-TYPE EDM, TRAVELS: X-23.6 INCH; Y-15.7 INCH; Z-15.7 INCH, TABLE: 23.5 INCH X 31.5 INCH, MAX WORKPIECE SIZE: 39.4 INCH X 27.6 INCH X 15.7 INCH, MAX WORKPIECE WEIGHT: 2,200-LB, W/ 3R SYSTEM CHUCK S/N: 005-001 🔒 Subscribe
HAAS SHRT210H HAAS SHRT210H ROTARY TABLE, 210MM (8.3") PLATTER S/N: 224230 🔒 Subscribe
FARO F04 FARO F04 PORTABLE COORDINATE MEASURING ARM WITH CART, 24 INCH X 36 INCH X 4 INCH BLACK GRANITE SURFACE PLATE S/N: F04-L2-05-03391 🔒 Subscribe
SYSTEM 3R D-30193 / 3R-60.360SA SYSTEM 3R D-30193 / 3R-60.360SA ROTARY INDEXING TABLE 🔒 Subscribe
2005 HAAS TM-2 2005 HAAS TM-2 4-AXIS VERTICAL MACHINING CENTER, TABLE: 10.5" X 57.75", TRAVELS: X-40"; Y-16"; Z-16", UP TO 4,000-RPM, CT40 SPINDLE TAPER, 20-POSITION ATC, PROBING SYSTEM, WIRED FOR 4TH-AXIS, 208/240 VOLT S/N: 39888 🔒 Subscribe
ELBO CONTROLLI HATHOR SIX ELBO CONTROLLI HATHOR SIX TOOL PRESETTER, 40 TAPER & HSK63 SPINDLE HOLDERS, DYMO LABELWRITER PRINTER, CT40 CALIBRATION GAGE, HSK63 CALIBRATION GAGE S/N: 5895 🔒 Subscribe
HAAS TR160Y HAAS TR160Y TRUNNION ROTARY TABLE, 160MM (6.3 INCH) PLATTER S/N: 904233 🔒 Subscribe
HAAS SHRT160H HAAS SHRT160H ROTARY TABLE, 160MM (6.3 INCH) PLATTER, TAILSTOCK S/N: 164214 🔒 Subscribe
HAAS HRT110 HAAS HRT110 ROTARY TABLE, 110MM (4.3") PLATTER S/N: 110020 🔒 Subscribe
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD ELTOOL TIGHTSPOT RIGHT ANGLE HEAD, MAX. 40,000 RPM S/N: H4667-1MG-3 🔒 Subscribe
TSUDAKOMA TWA-160G TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190040 🔒 Subscribe
HAAS STR160H HAAS STR160H TRUNNION ROTARY TABLE, 160MM (6.3") PLATTER S/N: 901557 🔒 Subscribe
KURT CL2D4 2A KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS 🔒 Subscribe
KURT CL2D4 2A KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS 🔒 Subscribe
TSUDAKOMA TWA-160G TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190039 🔒 Subscribe
KURT CT2SH4A KURT CT2SH4A CLUSTER TOWER 🔒 Subscribe
KURT CT2SH4A KURT CT2SH4A CLUSTER TOWER 🔒 Subscribe
STARRETT EZ612-5-300 STARRETT EZ612-5-300 OPTICAL MEASURING MACHINE, QUADRA-CHEK 300 VIDEO EDGE DETECTION & CROSSHAIR SYSTEM S/N: EZ-0244-1041-1007 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
MITEE-BITE VM300 MITEE-BITE VM300 VACMAGIC VACUUM CHUCK 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
5TH AXIS V562 5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE 🔒 Subscribe
TSUDAKOMA TWA-160 10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES 🔒 Subscribe
STARRETT STARRETT 36 INCH X 36 INCH X 6 INCH PINK GRANITE SURFACE PLATE W/ ROLLER CABINET BASE 🔒 Subscribe
V562 5TH-AXIS V562 5-INCH SELF CENTERING MACHINE VISE 🔒 Subscribe
TSUDAKOMA TWA-160 10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES 🔒 Subscribe
HAAS SH5CSB HAAS SH5CSB SINGLE SPINDLE 5C INDEXER S/N: 509312 🔒 Subscribe
38 INCH X 32 INCH X 76 INCH HIGH DOUBLE SIDED CANTILEVER RACK W/ CONTENTS, 12 INCH SUPPORT ARMS 🔒 Subscribe
SKAT BLAST 960 DLX SKAT BLAST 960 DLX BLAST CABINET, 46 X 28 X 28 WORK AREA, DUST COLLECTOR 🔒 Subscribe
KURT 3600V KURT 3600V 6 INCH MACHINE VISE 🔒 Subscribe
2016 OKUMA GENOS M560-V photo
2016 OKUMA GENOS M560-V
CNC MACHINE CENTERS
2016 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.3...
Hammer Price: 🔒
2016 OKUMA GENOS M560V photo
2016 OKUMA GENOS M560V
CNC MACHINE CENTERS
2016 OKUMA GENOS M560V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.34...
Hammer Price: 🔒
2019 OKUMA GENOS M560-V photo
2019 OKUMA GENOS M560-V
CNC MACHINE CENTERS
2019 OKUMA GENOS M560-V 5-AXIS CNC VERTICAL MACHINING CENTER, 22.05" X 51.18" TABLE, TRAVELS: X-41.3...
Hammer Price: 🔒
2008 AGIECHARMILLES CUT 30 photo
2008 AGIECHARMILLES CUT 30
CIRCUIT BOARD, SMT & SEMICONDUCTOR MANUFACTURING EQUIPMENT
2008 AGIECHARMILLES CUT 30 CNC WIRE-TYPE EDM, MAX WORKPIECE WEIGHT: 2,200-LB, TRAVELS: X-23.6 INCH; ...
Hammer Price: 🔒
TSUDAKOMA TWA-160 photo
TSUDAKOMA TWA-160
METALWORKING & FABRICATION EQUIPMENT
TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160776...
Hammer Price: 🔒
TSUDAKOMA TWA-160 photo
TSUDAKOMA TWA-160
METALWORKING & FABRICATION EQUIPMENT
TSUDAKOMA TWA-160 TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N: 160324...
Hammer Price: 🔒
2010 HAAS VF-3YT photo
2010 HAAS VF-3YT
CNC MACHINE CENTERS
2010 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, ...
Hammer Price: 🔒
2011 HAAS VF-3YT photo
2011 HAAS VF-3YT
CNC MACHINE CENTERS
2011 HAAS VF-3YT 5-AXIS CNC VERTICAL MACHINING CENTER, 24 INCH X 54 INCH TABLE, TRAVELS; X-40 INCH, ...
Hammer Price: 🔒
HAAS TR210H photo
HAAS TR210H
METALWORKING & FABRICATION EQUIPMENT
HAAS TR210H TRUNNION ROTARY TABLE...
Hammer Price: 🔒
OKAMOTO ACC16-24DX photo
OKAMOTO ACC16-24DX
METALWORKING & FABRICATION EQUIPMENT
OKAMOTO ACC16-24DX GRIND-X 16 INCH X 24 INCH AUTOMATIC SURFACE GRINDER, 15.75 INCH X 23.5 INCH FINE ...
Hammer Price: 🔒
2006 HAAS OM-2A photo
2006 HAAS OM-2A
CNC MACHINE CENTERS
2006 HAAS OM-2A 4-AXIS CNC VERTICAL MACHINING CENTER, TABLE: 10" X 20", TRAVELS: X-12"; Y-10"; Z-12"...
Hammer Price: 🔒
2011 HAAS VF-2 photo
2011 HAAS VF-2
CNC MACHINE CENTERS
2011 HAAS VF-2 4-AXIS CNC VERTICAL MACHINING CENTER, 16" X 36" TABLE, TRAVELS; X-30", Y-16", Z-20", ...
Hammer Price: 🔒
2006 HAAS VF-2DTR photo
2006 HAAS VF-2DTR
CNC MACHINE CENTERS
2006 HAAS VF-2DTR 5-AXIS CNC VERTICAL MACHINING CENTER, 14" X 36" TABLE, TRAVELS: X-30", Y-16", Z-20...
Hammer Price: 🔒
2005 HAAS TL-1 photo
2005 HAAS TL-1
CNC MACHINE CENTERS
2005 HAAS TL-1 CNC TOOL ROOM LATHE, 1800-RPM, 16 INCH SWING, 30 INCH CENTERS, 8 INCH 3-JAW CHUCK, TA...
Hammer Price: 🔒
2008 HAAS VF-2DYT photo
2008 HAAS VF-2DYT
CNC MACHINE CENTERS
2008 HAAS VF-2DYT 4-AXIS CNC VERTICAL MACHINING CENTER, 18" X 36" TABLE, TRAVELS; X-30"; Y-24"; Z-20...
Hammer Price: 🔒
2009 AGIECHARMILLES FORM 30 photo
2009 AGIECHARMILLES FORM 30
CNC MACHINE CENTERS
2009 AGIECHARMILLES FORM 30 CNC SINKER-TYPE EDM, TRAVELS: X-23.6 INCH; Y-15.7 INCH; Z-15.7 INCH, TAB...
Hammer Price: 🔒
HAAS SHRT210H photo
HAAS SHRT210H
METALWORKING & FABRICATION EQUIPMENT
HAAS SHRT210H ROTARY TABLE, 210MM (8.3") PLATTER S/N: 224230...
Hammer Price: 🔒
FARO F04 photo
FARO F04
TEST, MEASUREMENT & QUALITY EQUIPMENT
FARO F04 PORTABLE COORDINATE MEASURING ARM WITH CART, 24 INCH X 36 INCH X 4 INCH BLACK GRANITE SURFA...
Hammer Price: 🔒
SYSTEM 3R D-30193 / 3R-60.360SA photo
SYSTEM 3R D-30193 / 3R-60.360SA
METALWORKING & FABRICATION EQUIPMENT
SYSTEM 3R D-30193 / 3R-60.360SA ROTARY INDEXING TABLE...
Hammer Price: 🔒
2005 HAAS TM-2 photo
2005 HAAS TM-2
CNC MACHINE CENTERS
2005 HAAS TM-2 4-AXIS VERTICAL MACHINING CENTER, TABLE: 10.5" X 57.75", TRAVELS: X-40"; Y-16"; Z-16"...
Hammer Price: 🔒
ELBO CONTROLLI HATHOR SIX photo
ELBO CONTROLLI HATHOR SIX
TEST, MEASUREMENT & QUALITY EQUIPMENT
ELBO CONTROLLI HATHOR SIX TOOL PRESETTER, 40 TAPER & HSK63 SPINDLE HOLDERS, DYMO LABELWRITER PRINTER...
Hammer Price: 🔒
HAAS TR160Y photo
HAAS TR160Y
METALWORKING & FABRICATION EQUIPMENT
HAAS TR160Y TRUNNION ROTARY TABLE, 160MM (6.3 INCH) PLATTER S/N: 904233...
Hammer Price: 🔒
HAAS SHRT160H photo
HAAS SHRT160H
METALWORKING & FABRICATION EQUIPMENT
HAAS SHRT160H ROTARY TABLE, 160MM (6.3 INCH) PLATTER, TAILSTOCK S/N: 164214...
Hammer Price: 🔒
HAAS HRT110 photo
HAAS HRT110
METALWORKING & FABRICATION EQUIPMENT
HAAS HRT110 ROTARY TABLE, 110MM (4.3") PLATTER S/N: 110020...
Hammer Price: 🔒
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD photo
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD
METALWORKING & FABRICATION EQUIPMENT
ELTOOL TIGHTSPOT RIGHT ANGLE HEAD, MAX. 40,000 RPM S/N: H4667-1MG-3...
Hammer Price: 🔒
TSUDAKOMA TWA-160G photo
TSUDAKOMA TWA-160G
METALWORKING & FABRICATION EQUIPMENT
TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190040...
Hammer Price: 🔒
HAAS STR160H photo
HAAS STR160H
METALWORKING & FABRICATION EQUIPMENT
HAAS STR160H TRUNNION ROTARY TABLE, 160MM (6.3") PLATTER S/N: 901557...
Hammer Price: 🔒
KURT CL2D4 2A photo
KURT CL2D4 2A
METALWORKING & FABRICATION EQUIPMENT
KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS...
Hammer Price: 🔒
KURT CL2D4 2A photo
KURT CL2D4 2A
METALWORKING & FABRICATION EQUIPMENT
KURT CL2D4 2A CLUSTERLOCK PALLET VISE, (4) 2 INCH DOUBLE VISE SECTIONS...
Hammer Price: 🔒
TSUDAKOMA TWA-160G photo
TSUDAKOMA TWA-160G
METALWORKING & FABRICATION EQUIPMENT
TSUDAKOMA TWA-160G TILTING ROTARY TABLE, 160MM (6.3) PLATTER S/N 190039...
Hammer Price: 🔒
KURT CT2SH4A photo
KURT CT2SH4A
METALWORKING & FABRICATION EQUIPMENT
KURT CT2SH4A CLUSTER TOWER...
Hammer Price: 🔒
KURT CT2SH4A photo
KURT CT2SH4A
METALWORKING & FABRICATION EQUIPMENT
KURT CT2SH4A CLUSTER TOWER...
Hammer Price: 🔒
STARRETT EZ612-5-300 photo
STARRETT EZ612-5-300
TEST, MEASUREMENT & QUALITY EQUIPMENT
STARRETT EZ612-5-300 OPTICAL MEASURING MACHINE, QUADRA-CHEK 300 VIDEO EDGE DETECTION & CROSSHAIR SYS...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
MITEE-BITE VM300 photo
MITEE-BITE VM300
METALWORKING & FABRICATION EQUIPMENT
MITEE-BITE VM300 VACMAGIC VACUUM CHUCK...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
5TH AXIS V562 photo
5TH AXIS V562
METALWORKING & FABRICATION EQUIPMENT
5TH AXIS V562 5 INCH SELF CENTERING MACHINE VISE W/ LANG STYLE MOUNTING PLATE...
Hammer Price: 🔒
TSUDAKOMA TWA-160 photo
TSUDAKOMA TWA-160
METALWORKING & FABRICATION EQUIPMENT
10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES...
Hammer Price: 🔒
STARRETT photo
STARRETT
TEST, MEASUREMENT & QUALITY EQUIPMENT
STARRETT 36 INCH X 36 INCH X 6 INCH PINK GRANITE SURFACE PLATE W/ ROLLER CABINET BASE...
Hammer Price: 🔒
V562 photo
V562
METALWORKING & FABRICATION EQUIPMENT
5TH-AXIS V562 5-INCH SELF CENTERING MACHINE VISE...
Hammer Price: 🔒
TSUDAKOMA TWA-160 photo
TSUDAKOMA TWA-160
METALWORKING & FABRICATION EQUIPMENT
10" X 17" X 3" RISER PLATE MACHINED FOR TSUDAKOMA TWA-160 ROTARY TABLES...
Hammer Price: 🔒
HAAS SH5CSB photo
HAAS SH5CSB
METALWORKING & FABRICATION EQUIPMENT
HAAS SH5CSB SINGLE SPINDLE 5C INDEXER S/N: 509312...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
38 INCH X 32 INCH X 76 INCH HIGH DOUBLE SIDED CANTILEVER RACK W/ CONTENTS, 12 INCH SUPPORT ARMS...
Hammer Price: 🔒
SKAT BLAST 960 DLX photo
SKAT BLAST 960 DLX
SURFACE FINISHING EQUIPMENT
SKAT BLAST 960 DLX BLAST CABINET, 46 X 28 X 28 WORK AREA, DUST COLLECTOR...
Hammer Price: 🔒
KURT 3600V photo
KURT 3600V
METALWORKING & FABRICATION EQUIPMENT
KURT 3600V 6 INCH MACHINE VISE...
Hammer Price: 🔒

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.