High Quality CNC and Fabrication Equipment

2012 BEHRINGER HCS 160 CNC AUTOMATIC HIGH SPEED CIRCULAR SAW W/ BAR LOADING MAGAZINE. SPECIFICATIONS: CUTTING RANGE 90 ROUND:6.3; CUTTING RANGE 90 SQUARE:5.5 X 5.5; SMALLEST DIMENSION TO BE SAWN ROUND:0.8; SMALLEST DIMENSION TO BE SAWN SQUARE:0.8 X 0.8; RPM:20 250 MIN-1; FEEDING LENGTH SINGLE STROKE:39.4; FEED RATE:68.1/SEC; SAW BLADE DIAMETER:14.2; ELECTRICAL:460V/3PH. EQUIPPED WITH: BAR LOADING MAGAZINE SYSTEM, SIEMENS SIMATIC PANEL CONTROLLER, CHIP CONVEYOR WITH COOLANT TANK. S/N: 10004897

HEM VT125HA-1 SMART SAW 20 X 24 AUTOMATIC VERTICAL TILT FRAME BAND SAW S/N:739200. SPECIFICATIONS: CUTTING CAPACITY @ 90 DEGREES:20 X 24, MITER CAPABILITY:60 DEGREE LEFT / RIGHT, BLADE SIZE:1-1/4 X 16 0 X .042, MOTOR HP:7.5, BAR FEED SYSTEM:72, ELECTRICAL:460V/3PH, EQUIPPED WITH: CNC CONTROLLER, POWERED GUIDE ARM, POWERED CHIP SCRAPER, POWERED TABLE LIFT ROLLERS, POWERED VISES, COOLANT SYSTEM, POWERED BUNDLING CLAMP, FULLY PROGRAMMABLE AUTOMATIC OPERATION, MANUAL OPERATION, EXTRA SAW BLADES

2006 HAAS VF-2SS SUPER CNC VERTICAL MACHINING CENTER W/ ROTARY 4TH AXIS, VMC - GENERAL INFO X AXIS TRAVEL:30 Y AXIS TRAVEL:16 Z AXIS TRAVEL:20 X, Y. Z MAX RAPID TRAVERSE RATE:1,400 IPM TABLE DIMENSIONS:36 X 14 MAX SPINDLE RPM:12,000 RPM PEAK SPINDLE HP:30 HP ELECTRICAL:230V/3PH EQUIPPED WITH 24 TOOL SIDE MOUNT ATC, REMOTE JOG HANDLE, CHIP AUGER, PROGRAMMABLE COOLANT, HAAS HRT-160 6 4TH AXIS ROTARY TABLE, (2) VISE, HUOT TOOLSCOOT CART WITH TOOLING S/N:47679

2011 TAURING DELTA 50 CNC-C PLUS 3 ROLL ANGLE BENDER, 2 X 2 X 1/4 CAPACITY S/N:10000594 SPECIFICATIONS DRIVING ROLLS:3 ROLL-SHAFT DIAMETER:1.97 (50MM) STANDARD SHAFT WORKING LENGTH:4.53 (115MM) UNIVERSAL ROLLS DIAMETER:6.89 (175MM) LOWER SHAFT CENTRE DISTANCE (MINIMUM):8.07 (205MM) LOWER SHAFT CENTRE DISTANCE (MEDIUM):10.83 (275MM) LOWER SHAFT CENTRE DISTANCE (MAXIMUM):13.58 (345MM) LOWER/TOP SHAFT CENTRE DISTANCE (MAXIMUM):8.07 (205MM) TOP ROLL RUNOUT:3.94 (100MM) SHAFT REVOLUTIONS PER MINUTE:8 RPM ROLL ROTATION MOTOR POWER:4HP ELECTRICAL:230V/3PH EQUIPPED WITH CNC-C 2-AXIS CONTROL, TOOLING

1993 ACCURPRESS 7305 5 X 30 TON CNC HYDRAULIC PRESS BRAKE - GENERAL INFO SPECIFICATIONS OVERALL LENGTH OF BED AND RAM:60 DISTANCE BETWEEN HOUSINGS:52 TONNAGE CAPACITY:30 TON LENGTH OF RAM STROKE:6 OPEN HEIGHT:12 CLOSED HEIGHT:6 RAM SPEEDS; FAST APPROACH:150 IPM RAM SPEEDS; SLOW BEND:20 IPM RAM SPEEDS; FAST RETURN:290 IPM MAIN MOTOR HP:5 ELECTRICAL:480V/3PH EQUIPPED WITH ACCURPRESS AP2 CNC CONTROLLER, ETS PEDESTAL STAND WITH PUSH PALM/FOOT PEDAL OPERATION, RISER BLOCKS, OVERHEAD LIGHT S/N:2309

LAGUN FTV-2 10 X 50 VERTICAL MILLING MACHINE W/ SWI PROTOTRAK EDGE CNC CONTROLLER. TABLE SIZE:10 X 50 SPINDLE SPEEDS:60 TO 4200 RPM QUILL TRAVEL:5 SPINDLE TAPER:R8 SPINDLE FEEDS:.0015/.003/.006 IPR SPINDLE MOTOR HP:3 ELECTRICAL:230V/3PH EQUIPPED WITH SOUTHWESTERN INDUSTRIES PROTOTRAK EDGE 2-AXIS CNC CONTROLLER, AIR POWER DRAWBAR, COOLANT PUMP, MILLING MACHINE INSTRUCTION MANUAL, PROTOTRAK EDGE SELF-TRAINING MANUAL

1999 ERCOLINA TOP-BENDER ER50A 2 CAPACITY PIPE & TUBE BENDER W/ DIES S/N:5990032 TUBE CAPACITY:2 NUMBER OF BENDING SPEEDS:2 DEGREE OF BEND:0 210 DEGREE ELECTRICAL:460V/3PH EQUIPPED WITH 1/2, 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4, 2 BENDING DIES

GROVE SM3146E 24V ELECTRIC AERIAL MANLIFT SCISSOR LIFT, 25 PLATFORM HEIGHT MAXIMUM TOTAL WEIGHT CAPACITY:650 LBS. MAXIMUM WEIGHT CAPACITY ON DECK EXTENSION:250 LBS. MAXIMUM PLATFORM HEIGHT:25 OVERALL LENGTH (APPROXIMATE):8.5 HEIGHT W/ RAILS (APPROXIMATE):8 SYSTEM VOLTAGE:24V NUMBER OF BATTERIES:4 EQUIPPED WITH 36 SLIDE-OUT PLATFORM EXTENSION, BATTERY CHARGER

PEXTO 418-E 16 GAUGE X 48 MANUAL SLIP ROLL - CAPACITY:16 18 GAUGE (MILD STEEL) MAX. FORMING LENGTH:48 ROLL DIAMETER:3" S/N: 5/61

2010 SPEEDAIRE 4ME99 5HP RECIPROCATING AIR COMPRESSOR. SPECIFICATIONS: MOTOR HP:5 CFM @ 90 PSI:14.6 CFM @ 175 PSI:14.1 TANK SIZE:60 GALLONS ELECTRICAL:240V/3PH S/N:00024

HOMGE 14 HORIZONTAL / VERTICAL ROTARY TABLE - SPECIFICATIONS SIZE:14 (ACTUAL FACE PLATE DIMENSIONS IS 13-3/4)

2006 PRESTOLIFTS C62A-15LC BATTERY POWERED 1,000 LB. CAPACITY LIFT COUNTER BALANCE STACKER S/N:V21291-100 SPECIFICATIONS POWER:BATTERY OPERATED WEIGHT CAPACITY:1,000 LBS. LOAD CENTER:15 FORK LENGTH:30 RAISED HEIGHT:62 EQUIPPED WITH CHARGER, COUNTERWEIGHTS

2015 PHASE II 221-308 8" HORIZONTAL & VERTICAL ROTARY TABLE (NEVER USED)

TRION M3000B MEDIA BASED AIR CLEANER W/ STEEL 4 X 8 X 3/4 GRINDING WELDING TABLE WORKBENCH. SPECIFICATIONS STEEL TABLE SIZE:48 X 96 X 3/4 ELECTRICAL:230V/3PH

PHASE II 221-310 10 HORIZONTAL & VERTICAL ROTARY TABLE - SPECIFICATIONS SIZE:10 GEAR RATIO: 90:1

PHASE II 225-205 HORIZONTAL VERTICAL 5C COLLET INDEXER S/N:1905013

TRION M3000B MEDIA BASED AIR CLEANER W/ STEEL 10 X 4 GRINDING WELDING TABLE WORKBENCH. APPROXIMATE TABLE DIMENSIONS: 10 L X 4 W. AIR CLEANER HP: 2. ELECTRICAL: 230V/3PH. APPROX. SHIPPING WEIGHT: 1,000 LBS. APPROX. SHIPPING DIMENSIONS: 10 L X 6 W X 5 H

(2) SLOTTED ANGLE PLATES, 9 X 7 X 6 & 7 X 4-1/2 X 5-9/16 - SPECIFICATIONS DIMENSIONS OF PLATE 1:9 W X 7 H X 6 D DIMENSIONS OF PLATE 2:7-1/16 W X 5-9/16 H X 4-1/2 D

PHASE II 240-001 10 ADJUSTABLE TAILSTOCK S/N: 0904002 SPECIFICATIONS CENTER HEIGHT RANGE:5.60 TO 7.20 TILTING ANGLE OF CENTER:+/- 11"

2015 PHASE II 240-001 10 ADJUSTABLE TAILSTOCK (NEW) S/N:1409073 SPECIFICATIONS CENTER HEIGHT RANGE:5.60 TO 7.20 TILTING ANGLE OF CENTER:+/- 11"

HARIG AIR-FLO SHARPENING TOOL FIXTURE FOR ENDMILLS & MILLING CUTTERS

2006 KAESER TA 5 20CFM CYCLING REFRIGERATED AIR DRYER S/N:1950 FLOW @ 100 PSI:20 CFM REFRIGERANT:R134A ELECTRICAL:115V/1PH

2018 HACO EN43200 PRESSMASTER 223 US TON X 14 CNC PRESS BRAKE S/N:860002 APPROX. SHIPPING WEIGHT:40,000 LBS. APPROX. SHIPPING DIMENSIONS:216 L X 106 W X 120 H SPECIFICATIONS BENDING LENGTH:167.3 (4250MM) BENDING CAPACITY:224 US TONS (203 METRIC) DISTANCE BETWEEN HOUSINGS:147.6 (3750MM) GAP:15.75 (400MM) DAYLIGHT OPENING:21.26 (540MM) STROKE:14.56 (370MM) FAST APPROACH SPEED:6.3/SEC (160MM/S) MAX. BENDING SPEED:.31/SEC (8MM/S) FAST RETURN SPEED:6.7/SEC (170MM/S) MOTOR POWER:25HP ELECTRICAL:480V/3PH EQUIPPED WITH FASTBEND-3D MT PREMIUM CNC CONTROL, HIGH SPEED X-R-Z1-Z2 BACKGAUGE, WILSON TOOL EXPRESSRAIL 2000 TOP TOOL CLAMPING, CNC CONTROLLED ANTI DEFLECTION TABLE WILSON TOOL EXPRESSCROWNING, 2 MANUAL SHEET SUPPORTS, LED ILLUMINATION OF THE BENDING AREA, IRIS PLUS INTEGRATED ANGLE MEASURING SYSTEM, SICK REAR MOUNTED LIGHT CURTAINS

2005 ACCURPRESS 515012 ACCELL 150 TON X 12 4-AXIS CNC PRESS BRAKE W/ CONTROL UPGRADE & TOOLING CAPACITY:150 TON BED LENGTH:12 DISTANCE BETWEEN HOUSINGS:130 STROKE:8 THROAT DEPTH:16 OPEN HEIGHT:15 CLOSED HEIGHT:7 FAST APPROACH SPEED:480 IPM SLOW BEND SPEED:24 IPM FAST RETURN:320 IPM ELECTRICAL:460V/3PH EQUIPPED WITH ACCURPRESS ETS3000 4-AXIS CNC CONTROL UPGRADE, LARGE ASSORTMENT OF VARIOUS BRAND (HURCO/WILSON/WILA) & SIZE TOP & BOTTOM PRESS BRAKE DIES, SAFETY CAGE, WILA E3-SERIES CROWNING BLOCK, WILA HYDRAULIC UPPER TOOL CLAMPING S/N:8320

1999 GEKA HYDRACROP 55/A 55 TON HYDRAULIC IRONWORKER S/N: 12938 PUNCHING POWER:55 TON MAXIMUM PUNCHING CAPACITY:1-1/2 DIAMETER X 3/8 THICKNESS ANGLE SHEARING CAPACITY:4-1/2 X 4-1/2 X 3/8 FLATS SHEARING CAPACITY:12 X 5/8 SQUARE / ROUND BARS SHEARING CAPACITY:1-9/16 RECTANGULAR NOTCHING CAPACITY:1-1/2 X 3/8 ELECTRICAL:220V/3PH EQUIPPED WITH AUTO SHEARING BACK STOP, PUNCHES & BOTTOM DIES, BOTTOM, 1-1/2 PIPE NOTCHING HOLDER ADDITIONAL INFO THIS GEKA IRONWORKER IS MISSING THE BLADES, MOUNTING BRACKETRY, TABLE, AND HARDWARE FOR THE NOTCHING STATION. PLEASE SEE THE INCLUDED CLOSE-UP IMAGES FOR REFERENCE.

SCOTCHMAN 6509 65 TON HYDRAULIC IRONWORKER PUNCH TONNAGE:65 TONS PUNCH CAPACITY:1-1/16 THRU 3/4 THICK FLAT BAR SHEAR CAPACITY:1 X 6, 3/4 X 8, 1/2 X 12, 1/4 X 24 ANGLE SHEAR CAPACITY:6 X 6 X 3/8 BRAKE CAPACITY:1/4 X 24 ROD SHEAR CAPACITY:1-1/4 ROUND, 1 SQUARE MOTOR HP:5 ELECTRICAL:230V/3PH EQUIPPED WITH 24 BRAKE ATTACHMENT, 6 ANGLE SHEAR ATTACHMENT, ROD SHEAR ATTACHMENT, PICKET TOOL ATTACHMENT, PUNCHES & DIES, ELECTRIC REMOTE FOOT PEDAL S/N:5814FF797

HTC 250-10 PS HYDRAULIC SHEAR - GENERAL INFO THICKNESS CAPACITY:1/4 LENGTH OF CUT:104 FRONT OPERATED POWERED BACK GAUGE:35 NUMBER OF HOLD DOWNS:9 ELECTRICAL:230V/3PH EQUIPPED WITH 35 POWERED FRONT OPERATED BACK GAUGE WITH DIGITAL POSITIONING READOUT, SQUARING ARM, (2) FRONT ARM SUPPORTS S/N:11892942

1999 PROTH PSGS-3060BH 12 X 24 3-AXIS AUTOMATIC HYDRAULIC SURFACE GRINDER SPECIFICATIONS: TABLE:23.62 X 11.81 GRINDING LENGTH:23.62 GRINDING WIDTH:11.81 TABLE MOVEMENT:3 TO 82 FPM GRINDING WHEEL DIMENSIONS:13.97 X 1.49 X 5 GRINDING WHEEL SPEED:1450 RPM ELECTRICAL:230V/3PH EQUIPPED WITH COMPUTERIZED CONTROLLER INFEED, 23-7/8 X 11-7/8 ELECTROMAGNETIC CHUCK, COOLANT TANK & BELT FILTER, 3-AXIS AUTOMATIC OPERATION, SEPARATE HYDRAULIC SYSTEM. LUBRICATION SYSTEM S/N:91208-03

2018 COSEN AV-2026NC 20 X 26 NC PROGRAMMABLE AUTOMATIC DUAL MITERING VERTICAL TILT FRAME BAND SAW S/N:AV1061754 SPECIFICATIONS CUTTING CAPACITY @ 90:20 X 26 CUTTING CAPACITY @ 45 LEFT:20 X 17.9 CUTTING CAPACITY @ 60 LEFT:20 X 12 MAX. VISE OPENING:20 SAW BLADE SPEED:50 330/MIN. SAW BLADE SIZE:205 X 1.3 X .043 BLADE TENSION:HYDRAULICALLY CONTROLLED FEEDING STROKE:0 57 HYDRAULIC MOTOR:1 HP COOLANT MOTOR:1/4 HP MAIN MOTOR:7.5 HP ELECTRICAL:230V/3PH EQUIPPED WITH ADJUSTABLE FLOOD COOLANT SYSTEM, CAST IRON HYDRAULIC VICES, HYDRAULIC TILT FRAME HEAD FOR +/- 60 DEGREE MITERING, INVERTER BLADE DRIVE SYSTEM, HYDRAULIC BLADE TENSIONING SYSTEM, LASER LIGHT, WORK LIGHT, OVERHEAD BUNDLE CLAMPING, AUTOMATIC ZERO POSITIONING, SERVO BALL SCREW FEEDING SYSTEM.

2008 BAILEIGH RDB-500 3 CAPACITY ROTARY DRAW TUBE & PIPE BENDER (CONTROLLER UPGRADE) S/N:37894556 MAXIMUM CENTER LINE RADIUS:20 MINIMUM CENTER LINE RADIUS:.5 MINIMUM OD:.25 MILD STEEL PIPE (SCHEDULE 40):3 ALUMINUM PIPE (SCHEDULE 40):3 STAINLESS STEEL PIPE (SCHEDULE 40):2.5 MILD STEEL ROUND TUBE (WALL):3 (.25) ALUMINUM ROUND TUBE (WALL):3.5 (.25) STAINLESS STEEL ROUND TUBE (WALL):3.5 (.187) MOTOR HP:5 ELECTRICAL:230V/3PH EQUIPPED WITH UPGRADED CONTROL RETROFIT WITH PROGRAMMABLE AUTOMATIC BEND ANGLE SEQUENCES, MANUAL OPERATION, 3/4 INCH NPS BENDER DIE, MANUAL, BASE WITH CASTERS

WYSONG FAB400-144 400 TON X 15 CNC PRESS BRAKE HPF13-100X (S/N: HPF13-100X) SPECIFICATIONS TONNAGE:400 BED LENGTH:15 DISTANCE BETWEEN COLUMNS:12 STROKE:16 RAM ADJUSTMENT:15 MAX DIE SPACE:25 ELECTRICAL:460V/3PH EQUIPPED WITH CYBELEC DNC880S CONTROLLER, 2 AXIS BACKGAUGE

2007 BYSTRONIC XPERT 320/4100 320 TON X 161.4 6-AXIS CNC PRESS BRAKE (2019 CONTROL UPGRADE) BENDING CAPACITY:320 TONS BENDING LENGTH:161 STROKE:14.4 RAPID APPROACH SPEED:450 IPM BENDING SPEED:47 IPM RETURN SPEED:474 MOTOR:60 HP ELECTRICAL:460V/3PH EQUIPPED WITH CYBELEC VISITOUCH 19 CNC CONTROLLER (NEW IN 2019), FIESSLER LASER SAFE LIGHT CURTAIN, POWER CLAMPING, 6 AXIS BACKGAUGE (X1, X2, Z1, Z2, R1, R2), DUAL SHEET LIFTERS, PEDESTAL WORKSTATION & ASSORTMENT OF BYSTRONIC TOP & BOTTOM DIES S/N:7560001

1994 AMADA VIPROS 357 CNC TURRET PUNCH PRESS CAPACITY: 33 TONS SHEET SIZE 50" X 72" MAX MATERIAL THICKNESS .250" MAX HOLE DIAMETER 4.5" NUMBER OF TURRET STATIONS 45 STATION WITH 4 AUTO INDEX HIT RATE (.078PITCH) 315 HPM HIT RATE .314" PITCH 245 HPM HIT RATE 1" CENTERS 200 HPM POSITIONING SPEED 2000 IPM MAX FORMING 1/2" FLANGE CONTROL MODEL FANUC 04PC DRIVE MOTORS AC SERVO SMALLEST PROGRAMMABLE INCREMENT .001" POWER REQUIREMENTS 230/460/60/3 PHASE EQUIPPED WITH BUILT-IN MICROPROCESSOR - STANDARD SOFTWARE INCLUDED FOR PROGRAMMING A COMPREHENSIVE SET OF PATTERNS USED IN PUNCHING, NIBBLING, AND NOTCHING OPERATIONS. DIAGNOSTIC SYSTEM - EXTENSIVE DIAGNOSTIC SYSTEM INDICATES PROGRAMMING ERRORS AND PINPOINTS MACHINE AND CONTROL MALFUNCTIONS. STRIPPING SENSOR - AUTOMATICALLY HALTS MACHINE OPERATION IF TOOL DOES NOT STRIP. AUTOMATIC REPOSITIONING - HEAVY DUTY WORK HOLDERS SECURE MATERIAL DURING REPOSITIONING. HYDRAULIC DRIVE SYSTEM METRIC OR INCH DIMENSIONAL PROGRAMMING. PRECISION GROUND RECIRCULATING BALL LEAD SCREWS FOR X AND Y AXIS. CRASH PROOF CLAMP SENSORS. HARDENED AND GROUND TURRET INDEX PINS AND BUSHINGS. SAFETY INTERLOCKS AND OVERRUN PROTECTORS WITH ALL STEP CONTROL PREVENTS ACCIDENTS. 45 STATION TURRET FOR THICK TOOLING. (4 AUTO INDEX STATIONS). FANUC 04PC CONTROL WITH SOFTWARE FOR PATTERN FORMING, BEADING, EXTRUDING AND EMBOSSING WITH DWELL CYCLE PROGRAM AT BOTTOM OF STROKE ADJ. FORMING CAPABILITIES VARIABLE RAM STROKE PATTERNS FOR MAINTAINING 75 DBA IN THICK MATERIAL AIR BLOW / OIL MIST SYSTEM TOOLING PACKAGE INCLUDED TEG - 160 TOOL GRINDER INCLUDED

2020 KUKA KR 180 R3500 ULTRA K 6-AXIS ROBOTIC ARM W/ KR C4 CONTROLLER (S/N: 671990 (ROBOT), 3033448 (CONTROLLER)). SPECIFICATIONS: MAXIMUM REACH:137.83, RATED PAYLOAD:396.82 LBS, NUMBER OF AXES:6, REPEATABILITY:0.6MM, WEIGHT:2,648 LBS. ELECTRICAL:400V/3PH. EQUIPPED WITH KR C4 CONTROLLER, APPROXIMATELY 6 RISE STAND BASE

2018 KENT KGS618 6 X 18 MANUAL SURFACE GRINDER W/ 2-AXIS MITUTOYO DRO. SPECIFICATIONS: WORKING CAPACITY: 6 X 18, TABLE TRAVEL: 19.5, SADDLE TRAVEL: 8.5, GRINDING WHEEL CAPACITY: 8 X 1 X 1-1/4, SPINDLE SPEED: 3450 RPM, VERTICAL GRADUATION: 0.0002, VERTICAL REVOLUTION: 0.050, SPINDLE TO TABLE: 21, SPINDLE MOTOR: 2 HP, ELECTRICAL: 460V/3PH. EQUIPPED WITH: MITUTOYO KA-200 2-AXIS DIGITAL READOUT, KENT USA HMT-618 ELECTRO MAGNETIC CHUCK, WORK LIGHT, ONE SHOT LUBE. S/N: KT184026

2000 MILLER SYNCROWAVE 350LX TIG WELDER INPUT VOLTS:200/230/460(WIRED 460) INPUT AMPERES:151/131/67 INPUT PHASE:1 RATED OUTPUT:300 AMPS @ 32 VDC, 60% DUTY CYCLE EQUIPPED WITH FOOT PEDAL, GROUND CLAMP, WELDING TORCH, CART S/N:LA086807

HEM V100LM-2 18 X 20 TILTING HEAD VERTICAL BAND SAW S/N:441995 SPECIFICATIONS WORK CAPACITY @ 90:18 X 20 WORK HEIGHT CAPACITY, MAXIMUM:20 THROAT DEPTH, RATED:18 HEAD TILT, LEFT:45 DEGREES HEAD TILT, RIGHT:45 DEGREES BLADE WIDTH:1.25 BLADE LENGTH:14.3 BLADE THICKNESS:.042 BLADE SPEED (VARIABLE):60 TO 300 FPM SAW MOTOR HP:5 ELECTRICAL:460V/3PH EQUIPPED WITH POWERED TILTING HEAD WITH DIGITAL ANGLE READOUT, FLOOD COOLANT SYSTEM, PNEUMATIC VISE, PNEUMATIC BLADE TENSIONING, VARIABLE SPEED OPERATION, WORK LIGHT

2011 DOALL 3612-VH 36 HYDRAULIC TABLE FEED CONTOUR VERTICAL BAND SAW - GENERAL INFO MACHINE CUTTING CAPACITY:36 W X 12 H THROAT, BAND TO COLUMN:36 MAXIMUM WORK HEIGHT:12 BAND SPEED:30 5500 FPM BAND WIDTH CAPACITY:1/8 1 BAND LENGTH:199 TABLE:26-1/2 X 33-1/2 ; TILTS 45R, 10L TABLE STROKE:12 TABLE FEED:0 6 FPM TABLE FEED FORCE:0 175 LBS. TABLE CAPACITY:500 LBS. AC MOTOR DRIVE:3HP ELECTRICAL:460V/3PH EQUIPPED WITH VARIABLE FREQUENCY BAND SPEED AC DRIVE, DUAL-RANGE TRANSMISSION, VARIABLE HYDRAULIC TABLE FEED, BAND TENSION INDICATOR, REMOVEABLE CHIP DRAWER, ADJUSTABLE VISE, CHIP BLOWER, INSTRUCTION MANUAL S/N:570-11132

CLAUSING 2276 20 1.5HP VARIABLE SPEED FLOOR DRILL PRESS S/N:2070344 SWING:20 SPINDLE TAPER:3MT SPINDLE TRAVEL:6.5 VARIABLE SPEED RANGE:150 2000 RPM COLUMN DIAMETER:4 DRILLING CAPACITY:1 MOTOR HP:.75/1.5 HP ELECTRICAL:208-230V/3PH EQUIPPED WITH 2 SPEED MOTOR, VARIABLE SPEED OPERATION, JACOBS CHUCK