District Brew Yards Craft Brewery Wheeling Location Only

10-BBL 2-VESSEL STEAM AUTOMATED BREWHOUSE; AUTO RAKE AND PLOW FOR SPENT GRAIN REMOVAL, HMI TOUCHSCREEN WITH REMOTE ACCESS CAPABILITIES; INCLUDES: (2) 10-BBL STEAM VESSELS, AUTOMATED CONTROL PANEL, STAINLESS STEEL PLATFORM STAIRS, HOT/COLD LIQUOR BLENDING ASSEMBLY, 11-GALLON EXTERNAL WORT GRANT WITH SIGHT LEVEL GLASS, WORT GRANT PRESSURE SENSOR AUTOMATION WITH FLOW METER, SINGLE STAGE HEAT EXCHANGER, WORT AERATION ASSEMBLY, STEAM VALVE, WORT OUT TEMPERATURE PROBE AND 27 INCH WIDE BREWHOUSE TABLE HOLDER

RITE ENGINEERING 480,000 B.T.U.H. MODEL 48S NAT. GAS-FIRED STEAM BOILER, S/N: 34163; MAX. B.T.U.H INPUT: 480,000, 11-HP, MAX. FUEL SUPPLY PRESSURE: 14 IN. W.C., MIN. SUPPLY PRESSURE @ FLOW: 6 IN. W.C., MAX. MANIFOLD GAS PRESSURE: 3.5 IN. W.C., MIN. MANIFOLD GAS PRESSURE: 1.5 IN. W.C., APPROVED FOR INDOOR INSTALLATION, 120-V, 60-HZ, 1-PH

M & M BBQ PIT CO. MODEL MM120 WOOD-BURNING ROTISSERIE SMOKEHOUSE; 24 INCH X 50 INCH COOKING CHAMBER, 20 INCH X 28 INCH FIREBOX, 5.5 INCH X 48 INCH SMOKE STACK

ABE AUTOMATED CANNING FILLING & LABELING LINE, CONSISTING OF: ABE CANNING TAILGATOR, ABE CRAFTCAN 35 COMPLETE SERVO CANNING FILLING SYSTEM, ABE LABELMAX35 PRESSURE SENSITIVE LABELER, ABE LABELMAX35 TABLE/STAND AND ABE 16 IN. X 8 FT. MOTORIZED CONVEYOR PACK OFF TABLE. ABE TAILGATOR TG060 FEATURES: (65) CANS PER MINUTE OF CONTINUOUS OPERATION, 16.9 OZ MAX. CAN SIZE, TILTS AND VIBRATES TO ALLOW FEEDING INTO TWIST RINSE, ADJUSTABLE LEG HEIGHT, ALLOWS FOR FULL SLIP OF CANS, 110-VOLT, 50/60-HZ, 1-PH. ABE CRAFTCAN35 SERVO CANNING FILLING LINE FEATURES: ADJUSTABLE CAPABILITY FOR A VARIETY OF CAN SIZES AND BEVERAGES, CAPABLE TO PRODUCE UP TO (35) CANS PER MINUTE BASED ON 12 OZ CANS, 5-HEAD, 3-PORT STAINLESS STEEL UNIBODY NOZZLE ASSEMBLY WITH C02 PURGE CYCLE, FILL-TIMER TECHNOLOGY WITH PRECISION LIQUID LEVEL SENSOR, POST RINSE AND DRYER, PATENTED SERVOSEAMER, PLC TOUCHSCREEN OPERATION WITH FULLY ADJUSTABLE CYCLE TIMES, CAN CAPABILITIES - STANDARD U.S. SIZES: 12OZ., 16OZ. 19.2OZ., INTL. SIZES: 330ML., 355ML., 375ML., 440ML., 500ML., 568ML., SLIM/SLEEK/SPECIAL: 250ML. SLIM, 8OZ. SLEEK, 12OZ. SLEEK, LIDS: CDL-E, CDL-W, CDL+, SUPEREND, SUPER ENDDA+, B64, ISE, LOE, 208-240-VOLT, 50-60 HZ, 1-PH. ABE LABELMAX35 #4 TABLE-TOP PRESSURE SENSITIVE LABELER FEATURES: PRODUCTION RATES UP TO (35) CONTAINERS PER MINUTE, PROGRAMMABLE LOGIC CONTROLLER (PLC), OPTICAL SENSORS, TOUCHSCREEN FRONT PANEL DISPLAY, AUTOMATIC WRAP SPEED, 400-WATT SERVO MOTOR ON WRAP BELTS FOR AUTO-TRACKING, OTHER SPECIFICATIONS: #4 WIND ORIENTATION, 11.8 IN. SPOOL DIAMETER, 3 IN. INNER CORE, FACE STOCK: NON-TRANSPARENT, 220-VOLT, 50/60-HZ. ABE LABELMAX35 TABLE STAND: STAINLESS STEEL, ADJUSTING LEVELING FEET. ABE PT143 PACK-OFF TABLE: 8 FT. X 16 IN. CONVEYOR DIMS., STAINLESS STEEL / ALUMINUM FRAME, DAYTON CENTRAL DRIVE MOTOR, DELRON DRIVE SPROCKETS, DELRON LONG-LIFE CONVEYOR MATERIALS.

20 FT. WIDE X 8 FT. DEEP X 8 FT. HIGH WALK-IN RETAIL COOLER WITH (7) GLASS DISPLAY DOORS AND (7) SECTIONS OF 29 IN. WIDE X 28 IN. DEEP X 82 IN. HIGH BEVERAGE FLOW RACKS; 38 IN. X 79 IN. DOOR, LARKIN 4-FAN EVAPORATOR COIL

10-BBL STAINLESS STEEL BRITE TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, VISUAL LEVEL INDICATOR, GLYCOL JACKETED (BOTTOM)

FRYMASTER FPPH455BLSE 4-COMPARTMENT 320,000 BTU NATURAL GAS COMMERCIAL FRYER, 200-LB. CAPACITY, DIGITAL CONTROL, ELECTRONIC IGNITION, 80,000 BTU PER UNIT, (4) FRYER BASKETS S/N: 2206IF0019

1.5 HP PORTABLE TRANSFER PUMP SYSTEM; AMPCO/LEESON 1.5 HP WASHDOWN PUMP, ABE MOTOR SPEED CONTROL, 230 VOLT

1.5 HP PORTABLE TRANSFER PUMP SYSTEM; AMPCO/LEESON 1.5 HP WASHDOWN PUMP, ABE MOTOR SPEED CONTROL, 230 VOLT

10-BBL STAINLESS STEEL FERMENTATION TANK. FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (BOTTOM) S/N: FT2112009

10-BBL STAINLESS STEEL BRITE TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, VISUAL LEVEL INDICATOR, GLYCOL JACKETED (BOTTOM)

JLG 20MVL ELECTRIC MAN LIFT, 350 LB. CAP., 20 FT. MAX. LIFT HEIGHT, 25 FT. MAX. WORKING HEIGHT, 26 IN. X 28 IN. PLATFORM, 3.5 MPH MAX DRIVE SPEED, 20% GRADEABILITY, NON-MARKING TIRES, 12-VOLT/25-AMP BATTERY CHARGER S/N: 0130019620

2-WAY REGULATOR PANELS ON WALL; INCLUDES: 60-PSI REGULATORS, FOBS, BEER DROPS, AIR DROPS AND STAINLESS STEEL FITTINGS ON GALVANIZED MOUNTING PLATES

2015 TAYLOR MODEL L820-23 24 INCH 2-PLATEN TWO-SIDED COMMERCIAL CLAMSHELL ELECTRIC GRILL WITH TOUCH SCREEN CONTROLS, S/N: M5114062

10-BBL STAINLESS STEEL FERMENTATION TANK WITH PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACK WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (BOTTOM) S/N: FT2112007

KOMATSU 3,550 LB. CAP, MODEL FB20M-3 36-VOLT 3-WHEEL ELECTRIC FORKLIFT TRUCK, S/N: 23687A; WITH 42 IN. FORKS, 170 IN. MAX LIFT HEIGHT, SIDE SHIFT ATTACHMENT, SOLID TIRES, GNB MODEL SCR100-18-965T1+ 36-VOLT DC BATTERY CHARGER (BATTERY NOT HOLDING CHARGE)

10-BBL STAINLESS STEEL FERMENTATION TANK WITH PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (BOTTOM) S/N: FT2112006

10-BBL STAINLESS STEEL FERMENTATION TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (TOP)

10-BBL STAINLESS STEEL FERMENTATION TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (TOP)

10-BBL STAINLESS STEEL BRITE TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, VISUAL LEVEL INDICATOR, GLYCOL JACKETED (TOP)

10-BBL VOLUME GLYCOL COOLED COLD WATER TANK, THERMO-WELL, SAMPLE VALVE, LIFTING LUGS, TOP MANWAY, CIP ARM AND SPRAY BALL 360-DEGREE COVERAGE, VISUAL LEVEL SIGHT GLASS, DUAL ZONE COOLING JACKET WITH GLYCOL INLETS AND OUTLETS, AMPCO/LEESON STAINLESS STEEL WASH-DOWN PUMP

2010 ABE 10-BBL STAINLESS STEEL FERMENTATION TANK. FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (BOTTOM). S/N: FT2112008

BEER TRANSFER HOSES AND CLEAR NUTRIFLO HOSES ON 3 SHELVES

10-BBL STAINLESS STEEL FERMENTATION TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (TOP)

10-BBL STAINLESS STEEL BRITE TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK-STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, VISUAL LEVEL INDICATOR, GLYCOL JACKETED (TOP)

10-BBL STAINLESS STEEL FERMENTATION TANK; FEATURES: PRESSURE GAUGE, ANALOG TEMPERATURE GAUGE, PERLICK STYLE SAMPLE VALVE, LIFTING LUGS, LADDER HOOKS, SIDE MAN-WAY DOOR, CIP ARM AND ROTARY SPRAY BALL 360-DEGREES OF COVERAGE, DUAL-ZONE COOLING JACKET WITH GLYCOL INLET AND OUTLET, ROTATING DIN FITTING RACKING ARM AND DISCHARGE PORT WITH VALVE AND FITTINGS, UP TO 8 INCH DRY HOP PORT, THERMO-WELL (TOP)

ABE 12-TANK GLYCOL TEMPERATURE CONTROL PANEL; FEATURES: 12-TANK CAPACITY, NEMA ENCLOSURE, MOD BUS CAPABLE, CONTROLLERS ARE FUSED AND RELAY PROTECTED, RECOMMENDED RTD SENSOR, 110-220 VAC INPUT VOLTAGE, 24V AC CONTROL

2001 WHEATLAND BINS MODEL 1210EBVW 1,450 CU. FT. CAPACITY SMOOTHWALL GRAIN STORAGE SILO, 12 FT. DIAMETER, 45-DEGREE CONE, 25 IN. TOP OPENING, INCLUDES SEPARATE INLINE SCALE S/N: 18440

2010 BULLDOG WD20 20 INCH ELECTRIC WALK-BEHIND FLOOR SCRUBBER; 20,000 SQ FT/HR CLEANING RATE, SINGLE DISK BRUSH, 3/4 HP BRUSH MOTOR

20-BBL STEAM HOT LIQUOR TANK; 20-BBL VOLUME HOT WATER TANK, THERMO-WELL, SAMPLE VALVE, LIFTING LUGS, TOP MANWAY, CIP ARM AND SPRAY BALL 360-DEGREES AND 10 FT. OF COVERAGE, EASY-CLEAN CIP BALL THAT FEATURES A SLIDE-OVER PIPE CONNECTION WITH COTTER PIN, VISUAL LEVEL SIGHT GLASS, DUAL ZONE STEAM JACKETS, AMPCO/LEESON STAINLESS STEEL WASH-DOWN PUMP

2021 LINDE MT18 4,000-LB. CAPACITY 48-VOLT ELECTRIC WALK BEHIND PALLET JACK, S/N: AT1133Y30195; 27 INCH WIDE X 45.5 INCH LONG FORKS, 24 INCH LOAD CENTER, POLYURETHANE TIRES, 48-VOLT/12-AMP BATTERY CHARGER

2015 ABE KEG COMMANDER AUTOMATIC 2-HEAD KEG WASHER. FEATURES: EASY PUSH BUTTON OPERATION, AUTOMATIC PLC CONTROL, FULLY-CUSTOMIZABLE 21-STEP WASH/SANITIZE PROCESS, DUAL 40-GALLON CLEANING RESERVOIRS WITH INDEPENDENT HEATING ELEMENTS, LOW LEVEL PROTECTION FOR HEATING ELEMENTS AND PUMP, COUNTER FOR NUMBER OF KEGS WASHED.

INGERSOLL RAND MODEL 2475N7.5-P 7.5 HP 2-STAGE VERTICAL TANK MOUNTED AIR COMPRESSOR, 175 PSI, 80-GALLON TANK, 230 VOLT, 3 PHASE S/N: CBV842459

(3) HYDROMETER TEST TUBES, (4) PLATO HYDROMETERS, (1) THERMOMETER AND (10) HYDRION PH PAPER WITH CASE IN (1) BOX WITH (2) TAYLOR MODEL 5839N DIGITAL KITCHEN TIMERS

1.5 INCH STAINLESS STEEL BUTTERFLY VALVES, 1.5 INCH SIGHT GLASSES AND KEG COUPLERS IN (2) BOXES

KEG STORAGE RACKS; (2) SECTIONS OF 96 INCH WIDE X 48 INCH DEEP X 84 INCH HIGH AND (1) SECTION OF 48 INCH WIDE X 48 INCH DEEP X 84 INCH HIGH WITH (24) SECTIONS OF 18 INCH X 48 INCH ROLLER CONVEYOR

CECILWARE MODEL GCP36 36 INCH 3-BURNER NATURAL GAS COUNTERTOP COMMERCIAL GRIDDLE WITH STAINLESS STEEL CART, 90,000 TOTAL BTU, 30,000 BTU PER BURNER S/N: 2201761

2023 ATOSA COOKRITE 36 INCH 6-BURNER NATURAL GAS RANGE AGR-6B-NG; 219,000 TOTAL BTU, 32,000 BTU BURNERS, 27,000 BTU OVEN

MODENO 40 INCH LONG X 120 INCH WIDE X 30 INCH HIGH MARBLE TOP NATURAL GAS OUTDOOR PATIO FIRE PIT TABLE; ELECTRONIC IGNITION

MODENO 40 INCH LONG X 120 INCH WIDE X 30 INCH HIGH MARBLE TOP NATURAL GAS OUTDOOR PATIO FIRE PIT TABLE; ELECTRONIC IGNITION

PALLET RACK WITH STEEL GRATE DECKING. (1) SECTION OF 96 INCH WIDE X 48 INCH DEEP X 120 INCH HIGH AND (2) SECTIONS OF 48 INCH WIDE X 48 INCH DEEP X 120 INCH HIGH.

18 RUBBERMAID WASTE CANS WITH 4 DOLLIES

48 INCH X 84 INCH WALK-IN COOLER DOOR

NAVILLUS WOODWORKS WOOD/METAL FURNITURE: 30 INCH LONG X 96 INCH WIDE X 30 INCH HIGH HICKORY TOP TABLES WITH (4) 16 INCH LONG X 44 INCH WIDE X 18 INCH HIGH BENCH SEATS; TABLE FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 2 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES; BENCH SEAT FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 1.5 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES

STAINLESS STEEL TRI-CLAMPS IN (2) BOXES

KEG STORAGE RACKS; (2) SECTIONS OF 96 INCH WIDE X 48 INCH DEEP X 84 INCH HIGH AND (1) SECTION OF 48 INCH WIDE X 48 INCH DEEP X 84 INCH HIGH WITH (24) SECTIONS OF 18 INCH X 48 INCH ROLLER CONVEYOR

NAVILLUS WOODWORKS WOOD/METAL FURNITURE: 30 INCH LONG X 96 INCH WIDE X 30 INCH HIGH HICKORY TOP TABLES WITH (4) 16 INCH LONG X 44 INCH WIDE X 18 INCH HIGH BENCH SEATS; TABLE FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 2 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES; BENCH SEAT FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 1.5 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES

1.5 INCH STAINLESS STEEL TEES, 1.5 INCH STAINLESS STEEL ELBOWS, 1.5 INCH STAINLESS STEEL EXTENSION PIPES, GASKETS AND CLAMP SEALS IN (5) BOXES

NAVILLUS WOODWORKS WOOD/METAL FURNITURE: 30 INCH LONG X 96 INCH WIDE X 30 INCH HIGH HICKORY TOP TABLES WITH (4) 16 INCH LONG X 44 INCH WIDE X 18 INCH HIGH BENCH SEATS; TABLE FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 2 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES; BENCH SEAT FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 1.5 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES

NAVILLUS WOODWORKS WOOD/METAL FURNITURE: 30 INCH LONG X 96 INCH WIDE X 30 INCH HIGH HICKORY TOP TABLES WITH (4) 16 INCH LONG X 44 INCH WIDE X 18 INCH HIGH BENCH SEATS; TABLE FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 2 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES; BENCH SEAT FEATURES: 3/4 INCH THICK SOLID HICKORY WITH CONVERSION VARNISH FINISH, 1.5 INCH TUBE STEEL CONSTRUCTION WITH POWDER COAT FINISH, ADJUSTABLE LEVELERS WITH VINYL GLIDES