NOW WEEKLY EVERY THURSDAY OF THE YEAR Plant Machinery Commercial Vehicle Auction With Lots Direct from Councils Hire Companies and More

2014 THWAITES MACH 865 6 TON DUMPER, 6 TON STRAIGHT TIP, 1920 HOURS, GOOD TYRE'S, CE MARKED

2014 GENIE Z-45/24 J SCISSOR LIFT / ACCESS PLATFORM, 1912 HOURS,DIESEL,2 WD,15.97 M WORK HEIGHT, 7.49 M HORIZONTAL REACH,227KG LIFT CAPACITY

START RITE TABLE SAW

PORTABLE WELFARE UNIT SITE OFFICE CABIN CANTEEN DRY ROOM WITH TOILET GENERATOR ANTI VANDAL STEEL PORTABLE WELFARE UNIT COMPLETE WITH GENERATOR. FITTED WITH LIGHTS, PLUG SOCKETS, HEATERS, SINKS, HOT WATER BOILERS, WATER TANK, 1X TOILET. HAS A CANTEEN AREA & A SEPARATE OFFICE. ALL IN GOOD WORKING CONDITION & READY FOR USE.

PORTABLE SITE OFFICE CABIN CANTEEN DRY ROOM WITH TOILET GENERATOR ANTI VANDAL STEEL PORTABLE WELFARE UNIT COMPLETE WITH GENERATOR FITTED WITH LIGHTS, PLUG SOCKETS, HEATERS, SINKS, HOT WATER, BOILERS, WATER TANK, WATER PUMP, 1X TOILET. HAS A CANTEEN AREA & A SEPARATE OFFICE. ALL IN GOOD WORKING ORDER & READY TO USE.

MANITOU BUGGY ROUGH TERRAIN DIESEL FORKLIFT CONTAINER SPEC DIESEL PERKINS GOOD TYRES ALL ROUND ALL WORKS AS SHOULD

MITSUBISHI 1.6 TONNE ELECTRIC FORKLIFT TRUCK 1.6 TONNE LIFT 3.2 METER MAST BRILLIANT BATTERY COMPLETE WITH CHARGER

FORKLIFT TIPPING SKIPS FOR TELEHANDLER FORKLIFTS, IN VARIOUS CONDITIONS. YOU ARE BIDDING ON ONE SKIP.

FORKLIFT TIPPING SKIPS, WITH HANDLE FOR TIPPING IDEAL FOR STANDARD COUNTER BALANCE FORKLIFT OR TELEHANDLER

LINDE 1.6 TONNE ELECTRIC FORKLIFT TRUCK LOW HOURS 3.8 METER MAST WITH SIDE SHIFT GOOD BATTERY COMPLETE WITH CHARGER

2016 TOYOTA 3.0 TONNE DIESEL FORKLIFT, 3.3 METRE CONTAINER STUFFER MAST, SIDE SHIFT, FULL CAB, ONLY 2176 HOURS

VOLVO PENTA 187KVA GENERATOR BEEN A FULL BACK UP GENERATOR UP AND RUNNING AND PRODUCING ELECTRIC

2010 LIEBHERR 954C SCRAP REHANDLER RUNS AND WORKS WELL, HYDRAULIC HIGH CAB, STILT, VERY GOOD UNDERCARRIAGE

2011 LIEBHERR 924C SCRAP / WASTE REHANDLER, VERY CLEAN, RUNS AND WORKS WELL, HIGH CAB.

2011 CASE WX210 SCRAP HANDLER, DIRECT FROM WORK, SOLID TYRES, HYDRAULIC HIGH CAB AND LONG REACH ARM

GENIE 3246 ELECTRIC SCISSOR LIFT, GOOD WORKING ORDER, TIDY CONDITION FOR THE YEAR. LOLER HAS RAN OUT LAST YEAR. PLATFORM HEIGHT - 9.7M WORKING HEIGHT - 11.5M

1992 CASE 888 WHEELED EXCAVATOR 18 TONNES, DIRECT FROM WORK, BLADE AND STABILIZERS

GENIE 3246 ELECTRIC SCISSOR LIFT, GOOD WORKING ORDER, TIDY CONDITION. LOLER RAN OUT LAST YEAR. PLATFORM HEIGHT - 9.7M WORKING HEIGHT - 11.5M

NANO/206 POWER TOWER S/N: 4011410C

REACH TRUCK

POWER TOWER NANO/320 S/N: 5653110C

POWER TOWER PT/139 S/N: 3880708A

GENIE LS65X/527 S/N: S6007-16274

POWER TOWER NANOSP+/54 S/N: 1701712F

POWER TOWER PTF/266 APPRAISAL: USED MODEL/SERIAL NO: 9433009A

POWER TOWER PT/349 S/N: 3780608A

POWER TOWER NANO/30 S/N: 2474709C

2008 JLG M4069/23 NANO LIFT S/N: 200179390

2006/2007 PLASMA MACHINE CUTTING TABLE: 27M LONG X 3.1M WIDE SLATTED BED WITH REMOVEABLE BINS TO ALLOW BED EMPTYING WHEN FULL OF BURNING DROSS. THE BED IS CURRENTLY EXTRACTED HOWEVER THE EXTRACTION UNIT OR ASSOCIATED DUCT WORK IS NOT INCLUDED IN THE SALE. THERE ARE THREE CUTTING GANTRIES THAT RUN UP AND DOWN ON THE BED ON THE RAILS. OXY FUEL THIS IS A GAS CUTTING GANTRY (PROPANE AND OXYGEN) AND HAS THE ABILITY TO CUT 300MM THICK STEEL PLASMA STRAIGHT CUT THIS GANTRY HAS A 360 AMP PLASMA CUTTING TORCH CAPABLE OF CUTTING THROUGH 40MM THICK STEEL. THE SAME GANTRY ALSO HAS GAS CUTTING TORCHES THAT CAN CUT THROUGH 150MM THICK STEEL PLASM BEVEL CUT THIS GANTRY HAS A 400AMP PLASMA TORCH CAPABLE OF CUTTING AT ~50 DEGREE ANGLE TO CREATE WELD PREPARATIONS. 40MM THICK STEEL IS THE MAXIMUM THICKNESS. GANTRY 3 WAS ADDED IN 2012. THE PLASMA TORCH TECHNOLOGY IN GANTRY 2 WAS UPDATED IN 2013 TO BE THE SAME AS GANTRY 3. ALL THREE GANTRIES ARE CURRENTLY OPERATIONAL

2019 F84SM SUPERMILL CNC MACHINE WITH VACUUM BED SOLUTION AND SINGLE BAG EXTRACTOR CURRENTLY DISMANTLED