Huge Welding Positioners Manipulators and other large scale machinery

Fram Fram LLC

Category: WELDING & CUTTING

Total Lots: 156

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 156 lots

Year	Make	Model	Lot Description	Hammer Price
	ARONSON	GE500-400	ARONSON GE500-400 WELDING POSITIONER CAPACITY: 50,000 LBS AT 12" MAX LOAD TORQUE IN ROTATION: 600,000 LB/IN MAX LOAD TORQUE IN TILT: 1,050,000 LB/IN POWER ELEVATION VARIABLE SPEED TILT INCLUDES 64" 3-JAW WELDING CHUCK APPROX DIMENSIONS: 114" (W) X 120" (D) X 96" (T) ESTIMATED WEIGHT: 23,900 ARONSON · GE500-400	🔒 Subscribe
2012	FARO	ION	2012 FARO ION 3D LASER TRACKER S/N: Y01001203976 INCLUDES: FARO MASTER CONTROL UNIT SERIAL NUMBER 3-12177 FARO V1.0 CAM2 MEASURE X (LICENSE TRANSFER FEES BUYERS RESPONSIBILITY) USB DONGLE LAPTOP COMPUTER & LARGE MONITOR ASSORTED DRIFT NESTS, CALIBRATION BALL AND OTHER ASSORTED ACCESSORIES ALL IN A LISTA ROLLING WORKSTATION. 2012 · FARO · ION	🔒 Subscribe
	LANSING	G.36-13.5/8	LANSING G.36-13.5/8 HOLLOW SPINDLE LATHE NO TAIL STOCK VARIABLE SPINDLE SPEEDS WITH 3 RANGES THREADING TYPES MODUL, METRIC, WHITWORTH, ENG DIA (SEE PICTURES FOR RANGES) 158 INCH BED LENGTH, 20 INCH GAP LENGTH, APPROXIMATE 17-1/2" BED WIDTH 13-5/8 INCH HOLE THROUGH SPINDLE 23-1/2 INCH 3-JAW CHUCK ON ENTRY SIDE 26 INCH 4-JAW CHUCK ON WORKING SIDE CROSS SLIDE WITH ALORIS EA TOOL POST (NO TAIL STOCK) STEADY REST TAPER ATTACHMENT COOLANT TANK AND PUMP CONTINUOUS DUTY 40 H.P. MOTOR, 240V, 3-PHASE ELECTRICS LATHE OVERALL DIMENSIONS APPROXIMATE 272 X 70 X 70 INCHES APPROXIMATE WEIGHT 16,000 LBS CONTROL CABINET DIMENSIONS 76 X 22 X 60 INCHES LANSING · G.36-13.5/8	🔒 Subscribe
	ARONSON	HTS120	ARONSON HTS120 WELDING HEADSTOCK & TAILSTOCK LOAD CAPACITY BETWEEN HEADSTOCK & TAILSTOCK: 240,000 LB - ARONSON HTS120 WELDING HEADSTOCK & TAILSTOCK LOAD CAPACITY BETWEEN HEADSTOCK & TAILSTOCK: 240,000 LBS HEADSTOCK MODEL: RHS120 SERIAL NO: 891 (POWERED) TAILSTOCK MODEL: RTS120 (NON POWERED) OVERHAND CAPACITY (EACH) 120,000 LBS@12" 96" FACEPLATE 24" HOLE IN HEAD & TAILSTOCK VARIABLE SPEED POWERED ELEVATION CONSUL & PENDENT CONTROL (4) INGERSOL BOLT ON ADJUSTABLE JAWS ARONSON · HTS120	🔒 Subscribe
	BULLARD	56" DYNATROL	BULLARD 56" DYNATROL VERTICAL TURRET LATHE TABLE / CHUCK DIAMETER: 56" 3-JAW CHUCK MAXIMUM SWING: 59" W/SIDE HEAD IN WORKING POSITION MAXIMUM SWING: 68" W/SIDE HEAD BELOW TABLE TOP HEIGHT UNDER RAIL: 40" RAIL ADJUSTMENT: 30" TABLE SPEEDS: (20) 5 TO 200 RPM FEEDS: .001" TO .250" PER/REV CREEP FEED: YES FEED INDICATORS: YES VERTICAL TRAVEL OF TURRET: 26" VERTICAL TURRET TOOL POSITIONS: YES TURRET TRAVEL ON RAIL: RIGHT 31" & LEFT 34-1/2" TURRET SWIVEL: 30 DEGREES, RIGHT OR LEFT SIDE HEAD TRAVELS: 38-3/4" VERTICAL & 23-3/4" HORIZONTAL PENDANT CONTROL: YES RAPID TRAVERSE ALL DIRECTIONS: YES AUTOMATIC LUBRICATION: YES MOTOR: 50 HORSEPOWER 3-JAW FACEPLATE INCLUDES PALLET WITH (3) BOLT ON ADJUSTABLE JAWS AND STATIONARY JAWS, ASSORTED TOOL HOLDERS. S/N: 31915 BULLARD · 56" DYNATROL	🔒 Subscribe
			LARGE ANGLE PLATE (SEE PHOTOS) THIS LOT INCLUDES ALL THE ELEMENTS IN GREEN SHOWN IN THE PHOTOS TO INCLUDE: 8' X 17' X 2-3/8" STEEL TABLE, 112" X 114" X 3" THINK T-SLOT TABLE DESIGNED TO SIT VERTICALLY	🔒 Subscribe
			18' X 7' X 9" T-SLOTTED LAYOUT TABLE, 2-1/2IN T-SLOT SURFACE, REMOVED FROM PLANER MILL OR EQUIVALENT	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE, 96.5" X 206" X 2-1/2" THICK. CONTENTS NOT INCLUDED.	🔒 Subscribe
			OVERHEAD CONVEYOR SYSTEM INCLUDING 10@40FT STRAIGHT RUNS, 3@20FT STRAIGHT RUNS, ASSORTED CURVES AND 3HP 230/460V POWER UNIT.	🔒 Subscribe
	FARO	B08 REV 3	FARO B08 REV 3 FARO ARM CERTIFIED 2 SIGMA SINGLE POINT ACCURACY .304MM (0.011") 100-240V 50-60HZ, +12VDC INCLUDES TIP KIT, CERTIFICATION RECORDS, MANUALS, CARY CASE & MORE CALIPER 3D SOFTWARE FARO · B08 REV 3	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
			50-TON CAPACITY ELECTRIC ROTARY WELDING TABLE, 72" DIAMETER, 2-3/8" THICK TOP	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
	ACORN		ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES ACORN	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
	ARONSON	WRU10PT	ARONSON WRU10PT WELDING TURNING ROLLS WITH INTEGRATED TILTING TABLE. 10,000 LB CAPACITY, WELDING POSITIONER, S/N: 693. PENDENT CONTROLS, TILT/ ROTATION. ARONSON · WRU10PT	🔒 Subscribe
	CULLEN-FRIESTEDT	42" CHUCK VARIABLE SPEED TILT	CULLEN-FRIESTEDT 42" CHUCK VARIABLE SPEED TILT WELDING POSITIONER CULLEN-FRIESTEDT · 42" CHUCK VARIABLE SPEED TILT	🔒 Subscribe
	PLASMACAM	CUTMASTER 80XL	PLASMACAM CNC PLASMA TABLE. 11' X 6' DOWNDRAFT TABLE INCLUDES: THERMADYNE THERMAL DYNAMICS AIR PLASMA SYSTEM MODEL: CUTMASTER 80XL, S/N: 00175652, WIRED 480V OVERALL TABLE DIMENSIONS 140 X 77 X 78 INCHES PLASMACAM · CUTMASTER 80XL	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE (TOP ONE SHOWN IN PHOTOS) ___ LONG X 50" WIDE WITH 1-3/8" THICK STEEL - HEAVY DUTY STEEL LAYOUT TABLE (TOP ONE SHOWN IN PHOTOS) APPROX 150" LONG X 50" WIDE WITH 1-3/8" THICK STEEL TOP	🔒 Subscribe
	ARONSON		(2) ARONSON TANK TURNING ROLLS, BOTH IDLERS, 1- APPROX 19" X 9" STEEL WHEELS, 1- 26" X 5" STEEL WHEELS, BOTH ADJUSTABLE ARONSON	🔒 Subscribe
	TIGERSTOP	C07051XX91_1	TIGERSTOP C07051XX91_1 HEAVY DUTY CONTROLLER BED SIZE 312 X 10 INCHES 120V OVERALL DIMENSIONS 312 X 16 X 41 INCHES TIGERSTOP · C07051XX91_1	🔒 Subscribe
		48" BORING AND FACING HEAD	48" BORING AND FACING HEAD. CURRENT SLEEVE WILL ACCOMMODATE 5-1/2" SPINDLE. 48" BORING AND FACING HEAD	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE (BOTTOM ONE SHOWN IN PHOTOS) 150" LONG X 50" WIDE WITH 1-3/8" THICK STEEL TOP	🔒 Subscribe
	TIGERSTOP	PAL08031448	TIGERSTOP PAL08031448 HEAVY DUTY CONTROLLER BED SIZE 290 X 13 INCHES 120V OVERALL DIMENSIONS 291 X 35 X 55 INCHES TIGERSTOP · PAL08031448	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: SMALL CRACK SHOWN IN PHOTOS.	🔒 Subscribe
			20-TON 20' SPREADER BAR WITH HARDWARE AS SHOWN, 3,000# BEAM WEIGHT. THIS ITEM WILL HAVE AN ADDITION - 20-TON 20' SPREADER BAR WITH HARDWARE AS SHOWN, 3,000# BEAM WEIGHT.	🔒 Subscribe
	P & H TRAV-LIFT	TLR-71/2	P & H TRAV-LIFT TLR-71/2 10-TON OVERHEAD CRANE INCLUDES HOIST AND HOOK S/N: CH17007 P & H TRAV-LIFT · TLR-71/2	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES.	🔒 Subscribe
			T-SLOTTED TABLE 96 X 72 INCH SURFACE, 11-T-SLOTS 1 INCH TOP X 2 INCH BOTTOM X 2 INCH DEEP	🔒 Subscribe
			HEAVY DUTY LAYOUT TABLE WITH BASE 68" X 96" X 30-1/2" HIGH	🔒 Subscribe
			WELDING / SET-UP TABLE WITH BASE 60" X 60" X 27-1/2" HIGH, 2" THICK, 1-1/2" X 1-1/2" SQUARE PEGS	🔒 Subscribe
			HEAVY DUTY FREE STANDING CANTILEVER RACKING CONSISTING OF (5) 12' HIGH UPRIGHTS, ARMS AND MORE AS SHOWN	🔒 Subscribe
	VACUBLAST	D6S-1000	VACUBLAST D6S-1000 SAND BLASTING MACHINE, 25HP 208-230/460 MOTOR S/N: V-740208 VACUBLAST · D6S-1000	🔒 Subscribe
	P & H	5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING	P & H 5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING P & H · 5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING	🔒 Subscribe
	TIGERSTOP	PAL12285542	TIGERSTOP PAL12285542 HEAVY DUTY CONTROLLER (WILL NOT POWER UP / SCREEN IS BLACK) BED SIZE 168 X 10 INCHES. OVERALL DIMENSIONS TABLE# 1 168 X 25 X 58 INCHES. OVERALL DIMENSIONS TABLE# 2 174 X 15 X 45 INCHES. TIGERSTOP · PAL12285542	🔒 Subscribe
			T-SLOTTED TABLE ON AXLES, 71.5" X 96". 1-1/8" X 2" AT BASE T-SLOTS	🔒 Subscribe
	CW		CW WELDING MANIPULATOR, APPROX 8' TALL X 72" X-TRAVEL FOR A BASIC LIFT AND LOAD IN UPRIGHT POSITION CW	🔒 Subscribe
	ACORN		ACORN TYPE WELDING PLATEN 61" X 61" X 5" HIGH 2" SQUARE HOLES THIS ITEM WILL HAVE AN ADDITIONAL LOAD - ACORN TYPE WELDING PLATEN 61" X 61" X 5" HIGH 2" SQUARE HOLES ACORN	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: CRACK SHOWN IN PHOTOS.	🔒 Subscribe
			(2) UPRIGHTS AND (4) CROSS BARS FOR OUTDOOR CRANE SYSTEM. CROSS BARS ARE APPROX 30', UPRIGHTS ARE APPROX 26' TALL	🔒 Subscribe
	PILLAR	AB 3098-10	PILLAR AB 3098-10 300KW INDUCTION HEATER S/N: S.O. 31933-A-2 MV & MODEL AB 4350-81 SERIAL NUMBER: S.O. 31992-B-2 MV PILLAR · AB 3098-10	🔒 Subscribe
	AMERICAN HOLE WIZARD		AMERICAN HOLE WIZARD HEAVY DUTY DRILL, 47 INCH COLUMN, MORSE TAPER SPINDLE, 32-SPINDLE SPEEDS 25 TO 2000 RPM, 16-FEEDS .003 TO .125, WIRED 240V 3-PHASE AMERICAN HOLE WIZARD	🔒 Subscribe
	RIDGID	300	RIDGID 300 PIPE THREADER AND RIDIGD 950 PIPE CLAMP, WITH CONTROLS AND FOOT PEDAL RIDGID · 300	🔒 Subscribe
		70" 3-JAW WELDING GRIPPER CHUCK	70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE) 70" 3-JAW WELDING GRIPPER CHUCK	🔒 Subscribe
			(5) HEAVY DUTY 60" X 120" METAL WAREHOUSE CARTS WITH SOLID RUBBER WHEELS	🔒 Subscribe
		70" 3-JAW WELDING GRIPPER CHUCK	70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE) 70" 3-JAW WELDING GRIPPER CHUCK	🔒 Subscribe
1996	RANSOME	7 TAIL STOCK	1996 RANSOME 7 TAIL STOCK WELDING POSITIONER TAILSTOCK, CAPACITY 24,000 LBS, S/N: 5834211 1996 · RANSOME · 7 TAIL STOCK	🔒 Subscribe
	WHITE	MSB35	WHITE MSB35 FORK LIFT TRUCK, 3500LB CAPACITY, 145" MAX LIFT, 3-WHEEL DESIGN. CUSHION TIRES, BATTERY DEAD, LP TANK NOT INCLUDED WHITE · MSB35	🔒 Subscribe
			UL LISTED ABOVE GROUND STORAGE TANK FOR FLAMMABLE LIQUIDS W/ STEEL SPILL CONTAINMENT. OVERALL DIMS 109" X 119", TANK DIMS 64" X 74" SERIAL NUMBER: 610184	🔒 Subscribe

Year	Make	Model	Description	Price
	ARONSON	GE500-400	ARONSON GE500-400 WELDING POSITIONER CAPACITY: 50,000 LBS AT 12" MAX LOAD TORQUE IN ROTATION: 600,000 LB/IN MAX LOAD TORQUE IN TILT: 1,050,000 LB/IN POWER ELEVATION VARIABLE SPEED TILT INCLUDES 64" 3-JAW WELDING CHUCK APPROX DIMENSIONS: 114" (W) X 120" (D) X 96" (T) ESTIMATED WEIGHT: 23,900	🔒 Subscribe
2012	FARO	ION	2012 FARO ION 3D LASER TRACKER S/N: Y01001203976 INCLUDES: FARO MASTER CONTROL UNIT SERIAL NUMBER 3-12177 FARO V1.0 CAM2 MEASURE X (LICENSE TRANSFER FEES BUYERS RESPONSIBILITY) USB DONGLE LAPTOP COMPUTER & LARGE MONITOR ASSORTED DRIFT NESTS, CALIBRATION BALL AND OTHER ASSORTED ACCESSORIES ALL IN A LISTA ROLLING WORKSTATION.	🔒 Subscribe
	LANSING	G.36-13.5/8	LANSING G.36-13.5/8 HOLLOW SPINDLE LATHE NO TAIL STOCK VARIABLE SPINDLE SPEEDS WITH 3 RANGES THREADING TYPES MODUL, METRIC, WHITWORTH, ENG DIA (SEE PICTURES FOR RANGES) 158 INCH BED LENGTH, 20 INCH GAP LENGTH, APPROXIMATE 17-1/2" BED WIDTH 13-5/8 INCH HOLE THROUGH SPINDLE 23-1/2 INCH 3-JAW CHUCK ON ENTRY SIDE 26 INCH 4-JAW CHUCK ON WORKING SIDE CROSS SLIDE WITH ALORIS EA TOOL POST (NO TAIL STOCK) STEADY REST TAPER ATTACHMENT COOLANT TANK AND PUMP CONTINUOUS DUTY 40 H.P. MOTOR, 240V, 3-PHASE ELECTRICS LATHE OVERALL DIMENSIONS APPROXIMATE 272 X 70 X 70 INCHES APPROXIMATE WEIGHT 16,000 LBS CONTROL CABINET DIMENSIONS 76 X 22 X 60 INCHES	🔒 Subscribe
	ARONSON	HTS120	ARONSON HTS120 WELDING HEADSTOCK & TAILSTOCK LOAD CAPACITY BETWEEN HEADSTOCK & TAILSTOCK: 240,000 LB - ARONSON HTS120 WELDING HEADSTOCK & TAILSTOCK LOAD CAPACITY BETWEEN HEADSTOCK & TAILSTOCK: 240,000 LBS HEADSTOCK MODEL: RHS120 SERIAL NO: 891 (POWERED) TAILSTOCK MODEL: RTS120 (NON POWERED) OVERHAND CAPACITY (EACH) 120,000 LBS@12" 96" FACEPLATE 24" HOLE IN HEAD & TAILSTOCK VARIABLE SPEED POWERED ELEVATION CONSUL & PENDENT CONTROL (4) INGERSOL BOLT ON ADJUSTABLE JAWS	🔒 Subscribe
	BULLARD	56" DYNATROL	BULLARD 56" DYNATROL VERTICAL TURRET LATHE TABLE / CHUCK DIAMETER: 56" 3-JAW CHUCK MAXIMUM SWING: 59" W/SIDE HEAD IN WORKING POSITION MAXIMUM SWING: 68" W/SIDE HEAD BELOW TABLE TOP HEIGHT UNDER RAIL: 40" RAIL ADJUSTMENT: 30" TABLE SPEEDS: (20) 5 TO 200 RPM FEEDS: .001" TO .250" PER/REV CREEP FEED: YES FEED INDICATORS: YES VERTICAL TRAVEL OF TURRET: 26" VERTICAL TURRET TOOL POSITIONS: YES TURRET TRAVEL ON RAIL: RIGHT 31" & LEFT 34-1/2" TURRET SWIVEL: 30 DEGREES, RIGHT OR LEFT SIDE HEAD TRAVELS: 38-3/4" VERTICAL & 23-3/4" HORIZONTAL PENDANT CONTROL: YES RAPID TRAVERSE ALL DIRECTIONS: YES AUTOMATIC LUBRICATION: YES MOTOR: 50 HORSEPOWER 3-JAW FACEPLATE INCLUDES PALLET WITH (3) BOLT ON ADJUSTABLE JAWS AND STATIONARY JAWS, ASSORTED TOOL HOLDERS. S/N: 31915	🔒 Subscribe
			LARGE ANGLE PLATE (SEE PHOTOS) THIS LOT INCLUDES ALL THE ELEMENTS IN GREEN SHOWN IN THE PHOTOS TO INCLUDE: 8' X 17' X 2-3/8" STEEL TABLE, 112" X 114" X 3" THINK T-SLOT TABLE DESIGNED TO SIT VERTICALLY	🔒 Subscribe
			18' X 7' X 9" T-SLOTTED LAYOUT TABLE, 2-1/2IN T-SLOT SURFACE, REMOVED FROM PLANER MILL OR EQUIVALENT	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE, 96.5" X 206" X 2-1/2" THICK. CONTENTS NOT INCLUDED.	🔒 Subscribe
			OVERHEAD CONVEYOR SYSTEM INCLUDING 10@40FT STRAIGHT RUNS, 3@20FT STRAIGHT RUNS, ASSORTED CURVES AND 3HP 230/460V POWER UNIT.	🔒 Subscribe
	FARO	B08 REV 3	FARO B08 REV 3 FARO ARM CERTIFIED 2 SIGMA SINGLE POINT ACCURACY .304MM (0.011") 100-240V 50-60HZ, +12VDC INCLUDES TIP KIT, CERTIFICATION RECORDS, MANUALS, CARY CASE & MORE CALIPER 3D SOFTWARE	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
			50-TON CAPACITY ELECTRIC ROTARY WELDING TABLE, 72" DIAMETER, 2-3/8" THICK TOP	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
	ACORN		ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
			ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES	🔒 Subscribe
	ARONSON	WRU10PT	ARONSON WRU10PT WELDING TURNING ROLLS WITH INTEGRATED TILTING TABLE. 10,000 LB CAPACITY, WELDING POSITIONER, S/N: 693. PENDENT CONTROLS, TILT/ ROTATION.	🔒 Subscribe
	CULLEN-FRIESTEDT	42" CHUCK VARIABLE SPEED TILT	CULLEN-FRIESTEDT 42" CHUCK VARIABLE SPEED TILT WELDING POSITIONER	🔒 Subscribe
	PLASMACAM	CUTMASTER 80XL	PLASMACAM CNC PLASMA TABLE. 11' X 6' DOWNDRAFT TABLE INCLUDES: THERMADYNE THERMAL DYNAMICS AIR PLASMA SYSTEM MODEL: CUTMASTER 80XL, S/N: 00175652, WIRED 480V OVERALL TABLE DIMENSIONS 140 X 77 X 78 INCHES	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE (TOP ONE SHOWN IN PHOTOS) ___ LONG X 50" WIDE WITH 1-3/8" THICK STEEL - HEAVY DUTY STEEL LAYOUT TABLE (TOP ONE SHOWN IN PHOTOS) APPROX 150" LONG X 50" WIDE WITH 1-3/8" THICK STEEL TOP	🔒 Subscribe
	ARONSON		(2) ARONSON TANK TURNING ROLLS, BOTH IDLERS, 1- APPROX 19" X 9" STEEL WHEELS, 1- 26" X 5" STEEL WHEELS, BOTH ADJUSTABLE	🔒 Subscribe
	TIGERSTOP	C07051XX91_1	TIGERSTOP C07051XX91_1 HEAVY DUTY CONTROLLER BED SIZE 312 X 10 INCHES 120V OVERALL DIMENSIONS 312 X 16 X 41 INCHES	🔒 Subscribe
		48" BORING AND FACING HEAD	48" BORING AND FACING HEAD. CURRENT SLEEVE WILL ACCOMMODATE 5-1/2" SPINDLE.	🔒 Subscribe
			HEAVY DUTY STEEL LAYOUT TABLE (BOTTOM ONE SHOWN IN PHOTOS) 150" LONG X 50" WIDE WITH 1-3/8" THICK STEEL TOP	🔒 Subscribe
	TIGERSTOP	PAL08031448	TIGERSTOP PAL08031448 HEAVY DUTY CONTROLLER BED SIZE 290 X 13 INCHES 120V OVERALL DIMENSIONS 291 X 35 X 55 INCHES	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: SMALL CRACK SHOWN IN PHOTOS.	🔒 Subscribe
			20-TON 20' SPREADER BAR WITH HARDWARE AS SHOWN, 3,000# BEAM WEIGHT. THIS ITEM WILL HAVE AN ADDITION - 20-TON 20' SPREADER BAR WITH HARDWARE AS SHOWN, 3,000# BEAM WEIGHT.	🔒 Subscribe
	P & H TRAV-LIFT	TLR-71/2	P & H TRAV-LIFT TLR-71/2 10-TON OVERHEAD CRANE INCLUDES HOIST AND HOOK S/N: CH17007	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES.	🔒 Subscribe
			T-SLOTTED TABLE 96 X 72 INCH SURFACE, 11-T-SLOTS 1 INCH TOP X 2 INCH BOTTOM X 2 INCH DEEP	🔒 Subscribe
			HEAVY DUTY LAYOUT TABLE WITH BASE 68" X 96" X 30-1/2" HIGH	🔒 Subscribe
			WELDING / SET-UP TABLE WITH BASE 60" X 60" X 27-1/2" HIGH, 2" THICK, 1-1/2" X 1-1/2" SQUARE PEGS	🔒 Subscribe
			HEAVY DUTY FREE STANDING CANTILEVER RACKING CONSISTING OF (5) 12' HIGH UPRIGHTS, ARMS AND MORE AS SHOWN	🔒 Subscribe
	VACUBLAST	D6S-1000	VACUBLAST D6S-1000 SAND BLASTING MACHINE, 25HP 208-230/460 MOTOR S/N: V-740208	🔒 Subscribe
	P & H	5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING	P & H 5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING	🔒 Subscribe
	TIGERSTOP	PAL12285542	TIGERSTOP PAL12285542 HEAVY DUTY CONTROLLER (WILL NOT POWER UP / SCREEN IS BLACK) BED SIZE 168 X 10 INCHES. OVERALL DIMENSIONS TABLE# 1 168 X 25 X 58 INCHES. OVERALL DIMENSIONS TABLE# 2 174 X 15 X 45 INCHES.	🔒 Subscribe
			T-SLOTTED TABLE ON AXLES, 71.5" X 96". 1-1/8" X 2" AT BASE T-SLOTS	🔒 Subscribe
	CW		CW WELDING MANIPULATOR, APPROX 8' TALL X 72" X-TRAVEL FOR A BASIC LIFT AND LOAD IN UPRIGHT POSITION	🔒 Subscribe
	ACORN		ACORN TYPE WELDING PLATEN 61" X 61" X 5" HIGH 2" SQUARE HOLES THIS ITEM WILL HAVE AN ADDITIONAL LOAD - ACORN TYPE WELDING PLATEN 61" X 61" X 5" HIGH 2" SQUARE HOLES	🔒 Subscribe
			ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: CRACK SHOWN IN PHOTOS.	🔒 Subscribe
			(2) UPRIGHTS AND (4) CROSS BARS FOR OUTDOOR CRANE SYSTEM. CROSS BARS ARE APPROX 30', UPRIGHTS ARE APPROX 26' TALL	🔒 Subscribe
	PILLAR	AB 3098-10	PILLAR AB 3098-10 300KW INDUCTION HEATER S/N: S.O. 31933-A-2 MV & MODEL AB 4350-81 SERIAL NUMBER: S.O. 31992-B-2 MV	🔒 Subscribe
	AMERICAN HOLE WIZARD		AMERICAN HOLE WIZARD HEAVY DUTY DRILL, 47 INCH COLUMN, MORSE TAPER SPINDLE, 32-SPINDLE SPEEDS 25 TO 2000 RPM, 16-FEEDS .003 TO .125, WIRED 240V 3-PHASE	🔒 Subscribe
	RIDGID	300	RIDGID 300 PIPE THREADER AND RIDIGD 950 PIPE CLAMP, WITH CONTROLS AND FOOT PEDAL	🔒 Subscribe
		70" 3-JAW WELDING GRIPPER CHUCK	70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE)	🔒 Subscribe
			(5) HEAVY DUTY 60" X 120" METAL WAREHOUSE CARTS WITH SOLID RUBBER WHEELS	🔒 Subscribe
		70" 3-JAW WELDING GRIPPER CHUCK	70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE)	🔒 Subscribe
1996	RANSOME	7 TAIL STOCK	1996 RANSOME 7 TAIL STOCK WELDING POSITIONER TAILSTOCK, CAPACITY 24,000 LBS, S/N: 5834211	🔒 Subscribe
	WHITE	MSB35	WHITE MSB35 FORK LIFT TRUCK, 3500LB CAPACITY, 145" MAX LIFT, 3-WHEEL DESIGN. CUSHION TIRES, BATTERY DEAD, LP TANK NOT INCLUDED	🔒 Subscribe
			UL LISTED ABOVE GROUND STORAGE TANK FOR FLAMMABLE LIQUIDS W/ STEEL SPILL CONTAINMENT. OVERALL DIMS 109" X 119", TANK DIMS 64" X 74" SERIAL NUMBER: 610184	🔒 Subscribe

ARONSON GE500-400

ARONSON GE500-400 WELDING POSITIONER CAPACITY: 50,000 LBS AT 12" MAX LOAD TORQUE IN ROTATION: 600,00...

2012 FARO ION

2012 FARO ION 3D LASER TRACKER S/N: Y01001203976 INCLUDES: FARO MASTER CONTROL UNIT SERIAL NUMBER 3-...

LANSING G.36-13.5/8

LANSING G.36-13.5/8 HOLLOW SPINDLE LATHE NO TAIL STOCK VARIABLE SPINDLE SPEEDS WITH 3 RANGES THREADI...

ARONSON HTS120

ARONSON HTS120 WELDING HEADSTOCK & TAILSTOCK LOAD CAPACITY BETWEEN HEADSTOCK & TAILSTOCK: 240,000 LB...

BULLARD 56" DYNATROL

BULLARD 56" DYNATROL VERTICAL TURRET LATHE TABLE / CHUCK DIAMETER: 56" 3-JAW CHUCK MAXIMUM SWING: 59...

LARGE ANGLE PLATE (SEE PHOTOS) THIS LOT INCLUDES ALL THE ELEMENTS IN GREEN SHOWN IN THE PHOTOS TO IN

18' X 7' X 9" T-SLOTTED LAYOUT TABLE, 2-1/2IN T-SLOT SURFACE, REMOVED FROM PLANER MILL OR EQUIVALENT

HEAVY DUTY STEEL LAYOUT TABLE, 96.5" X 206" X 2-1/2" THICK. CONTENTS NOT INCLUDED.

OVERHEAD CONVEYOR SYSTEM INCLUDING 10@40FT STRAIGHT RUNS, 3@20FT STRAIGHT RUNS, ASSORTED CURVES AND

FARO B08 REV 3

FARO B08 REV 3 FARO ARM CERTIFIED 2 SIGMA SINGLE POINT ACCURACY .304MM (0.011") 100-240V 50-60HZ, +1...

ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES

50-TON CAPACITY ELECTRIC ROTARY WELDING TABLE, 72" DIAMETER, 2-3/8" THICK TOP

ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES

ACORN

ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES...

ACORN STYLE WELDING PLATEN TABLE, 120" X 60" X 6", 26.5" WORK HEIGHT, 1-5/8" SQUARE HOLES

ARONSON WRU10PT

ARONSON WRU10PT WELDING TURNING ROLLS WITH INTEGRATED TILTING TABLE. 10,000 LB CAPACITY, WELDING POS...

CULLEN-FRIESTEDT 42" CHUCK VARIABLE SPEED TILT

CULLEN-FRIESTEDT 42" CHUCK VARIABLE SPEED TILT WELDING POSITIONER...

PLASMACAM CUTMASTER 80XL

PLASMACAM CNC PLASMA TABLE. 11' X 6' DOWNDRAFT TABLE INCLUDES: THERMADYNE THERMAL DYNAMICS AIR PLASM...

HEAVY DUTY STEEL LAYOUT TABLE (TOP ONE SHOWN IN PHOTOS) ___ LONG X 50" WIDE WITH 1-3/8" THICK STEEL

ARONSON

(2) ARONSON TANK TURNING ROLLS, BOTH IDLERS, 1- APPROX 19" X 9" STEEL WHEELS, 1- 26" X 5" STEEL WHEE...

TIGERSTOP C07051XX91_1

TIGERSTOP C07051XX91_1 HEAVY DUTY CONTROLLER BED SIZE 312 X 10 INCHES 120V OVERALL DIMENSIONS 312 X ...

48" BORING AND FACING HEAD

48" BORING AND FACING HEAD. CURRENT SLEEVE WILL ACCOMMODATE 5-1/2" SPINDLE....

HEAVY DUTY STEEL LAYOUT TABLE (BOTTOM ONE SHOWN IN PHOTOS) 150" LONG X 50" WIDE WITH 1-3/8" THICK ST

TIGERSTOP PAL08031448

TIGERSTOP PAL08031448 HEAVY DUTY CONTROLLER BED SIZE 290 X 13 INCHES 120V OVERALL DIMENSIONS 291 X 3...

ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: SMALL CRAC

20-TON 20' SPREADER BAR WITH HARDWARE AS SHOWN, 3,000# BEAM WEIGHT. THIS ITEM WILL HAVE AN ADDITION

P & H TRAV-LIFT TLR-71/2

P & H TRAV-LIFT TLR-71/2 10-TON OVERHEAD CRANE INCLUDES HOIST AND HOOK S/N: CH17007...

ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES.

T-SLOTTED TABLE 96 X 72 INCH SURFACE, 11-T-SLOTS 1 INCH TOP X 2 INCH BOTTOM X 2 INCH DEEP

HEAVY DUTY LAYOUT TABLE WITH BASE 68" X 96" X 30-1/2" HIGH

WELDING / SET-UP TABLE WITH BASE 60" X 60" X 27-1/2" HIGH, 2" THICK, 1-1/2" X 1-1/2" SQUARE PEGS

HEAVY DUTY FREE STANDING CANTILEVER RACKING CONSISTING OF (5) 12' HIGH UPRIGHTS, ARMS AND MORE AS SH

VACUBLAST D6S-1000

VACUBLAST D6S-1000 SAND BLASTING MACHINE, 25HP 208-230/460 MOTOR S/N: V-740208...

P & H 5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING

P & H 5-TON OVERHEAD CRANE WITH HOIST DOUBLE GIRDER, TOP RUNNING...

TIGERSTOP PAL12285542

TIGERSTOP PAL12285542 HEAVY DUTY CONTROLLER (WILL NOT POWER UP / SCREEN IS BLACK) BED SIZE 168 X 10...

T-SLOTTED TABLE ON AXLES, 71.5" X 96". 1-1/8" X 2" AT BASE T-SLOTS

CW WELDING MANIPULATOR, APPROX 8' TALL X 72" X-TRAVEL FOR A BASIC LIFT AND LOAD IN UPRIGHT POSITION...

ACORN

ACORN TYPE WELDING PLATEN 61" X 61" X 5" HIGH 2" SQUARE HOLES THIS ITEM WILL HAVE AN ADDITIONAL LOAD...

ACORN STYLE WELDING PLATEN. APPROX 61.5" X 61.5" X 5.25" DEEP WITH 2" SQUARE HOLES. NOTE: CRACK SHOW

(2) UPRIGHTS AND (4) CROSS BARS FOR OUTDOOR CRANE SYSTEM. CROSS BARS ARE APPROX 30', UPRIGHTS ARE AP

PILLAR AB 3098-10

PILLAR AB 3098-10 300KW INDUCTION HEATER S/N: S.O. 31933-A-2 MV & MODEL AB 4350-81 SERIAL NUMBER: S....

AMERICAN HOLE WIZARD

AMERICAN HOLE WIZARD HEAVY DUTY DRILL, 47 INCH COLUMN, MORSE TAPER SPINDLE, 32-SPINDLE SPEEDS 25 TO ...

RIDGID 300

RIDGID 300 PIPE THREADER AND RIDIGD 950 PIPE CLAMP, WITH CONTROLS AND FOOT PEDAL...

70" 3-JAW WELDING GRIPPER CHUCK

70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE)...

(5) HEAVY DUTY 60" X 120" METAL WAREHOUSE CARTS WITH SOLID RUBBER WHEELS

70" 3-JAW WELDING GRIPPER CHUCK

70" 3-JAW WELDING GRIPPER CHUCK FOR USE ON A WELDING POSITIONER (DIMENSIONS ARE APPROXIMATE)...

1996 RANSOME 7 TAIL STOCK

1996 RANSOME 7 TAIL STOCK WELDING POSITIONER TAILSTOCK, CAPACITY 24,000 LBS, S/N: 5834211...

WHITE MSB35

WHITE MSB35 FORK LIFT TRUCK, 3500LB CAPACITY, 145" MAX LIFT, 3-WHEEL DESIGN. CUSHION TIRES, BATTERY ...

UL LISTED ABOVE GROUND STORAGE TANK FOR FLAMMABLE LIQUIDS W/ STEEL SPILL CONTAINMENT. OVERALL DIMS 1

1 2 3 4 Next >>

Recent Searches

Login

Reset Password

Huge Welding Positioners Manipulators and other large scale machinery

Save to Project Folder

Print Options

Unlock Unlimited Printing