Surplus Machinery Major Material Handling Equipment MFG
Category: CNC MACHINE CENTERS
Total Lots:
111
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2016 | MILLTRONICS | VM2515 |
2016 MILLTRONICS VM2515 VERTICAL MACHINING CENTER MACHINE SPECIFICATIONS CAPACITIES TABLE: 30 X 16 X-AXIS TRAVEL: 25 Y-AXIS TRAVEL: 15 Z-AXIS TRAVEL: 20 TABLE LOAD: 1,500 LBS T-SLOT SIZE: .71 SPINDLE SPINDLE TAPER: BIG PLUS IS NO. 40 SPINDLE NOSE TO TABLE TOP: 4 24 COLUMN TO SPINDLE CENTER: 16 SPINDLE SPEEDS: 10,000 RPM SPINDLE MOTOR: 15/10 HP SPINDLE TORQUE: 54 FT-LBS AUTOMATIC TOOL CHANGER NUMBER OF TOOLS (DOUBLE ARM): 20 TOLL SHANK: CT-40 PULL STUD: MAS 60 MAXIMUM TOOL DIAMETER: 3.5 MAXIMUM TOOL LENGTH: 9.8 MAXIMUM TOOL WEIGHT: 15 LBS MOTION RAPID TRAVERSE RATES (X, Y, Z): 945 IPM MAXIMUM CUTTING FEED RATE: 500 IPM GENERAL FLOOR SPACE REQUIRED: 76 LR X 101 FB X 101 H WEIGHT (APPROXIMATELY): 6,000 LBS ELECTRICS: 208 240 VOLTS, 3 PH, 60 CYC EQUIPPED WITH MILLTRONICS 9000 CNC CONTROL CHIP AUGER
|
🔒 Subscribe |
|
|
2010 | MILLTRONICS | ML16 |
2010 MILLTRONICS ML16 CNC LATHE MACHINE SPECIFICATIONS: CAPACITY: X-AXIS TRAVEL............11" Z-AXIS TRAVEL............44.5" SWING OVER BED (DIAMETER)............17" SWING OVER GAP (DIAMETER)............25.9" GAP DISTANCE............12.75" SWING OVER CROSS SLIDE (DIAMETER)............7.48" SPINDLE: SPINDLE NOSE............A2-5 SPINDLE BORE............2.05" SPINDLE RANGE............100-400 RPM AC SPINDLE MOTOR............18/12 HP SPINDLE TORQUE............124 FT.-LBS. TAILSTOCK: TAILSTOCK QUILL TRAVEL............6" TAILSTOCK QUILL DIAMETER............2.55" TAILSTOCK QUILL TAPER............MT4 MOTION: X, Z AXIS RAPID TRAVERSE RATE............500 IPM CUTTING FEED RATE - MAXIMUM............100 IPM X-AXIS BALL SCREW DIAMETER............1.0" Z-AXIS BALL SCREW DIAMETER............1.57" POSITIONING ACCURACY............+/- 0.00025" REPEATABILITY............0.0002" AXIS THRUST FORCE X,Z............1500 LBS. GENERAL: MACHINE HEIGHT............80" FLOOR SPACE REQUIRED............120"W X 83"D MACHINE WEIGHT (APPROXIMATELY)............6000 LBS POWER REQUIRED............23 KVA VOLTAGE REQUIRED............208-240 VOLTS EQUIPPED WITH: MILLTRONICS 7200 CNC CONTROL TAILSTOCK STEADY REST
|
🔒 Subscribe |
|
|
2016 | COMAC | 305 HV4 |
2016 COMAC 305 HV4 SECTION BENDER
|
🔒 Subscribe |
|
|
GEKA | HYDRACROP #80/A |
80 TON GEKA HYDRACROP #80/A HYDRAULIC IRONWORKER
|
🔒 Subscribe | |
|
|
OKAMOTO | ACC-12.24ST |
OKAMOTO ACC-12.24ST SURFACE GRINDER 12 X 24 FINE ELECTROMAGNETIC CHUCK 3-AXIS FULLY AUTOMATIC AND PLUNGE GRINDING SYSTEM SPARK-OUT 0-5 TIMES FOR FINE FINISH PRECISION ROLLER BEARINGS ON LONGITUDINAL AND CROSS FEED GUIDERAILS HEAVY DUTY SPINDLE WITH 2 SETS OF CLASS 7 SUPER PRECISION ANGULAR CONTACT BALL BEARINGS HARDENED AND GROUND CROSS FEED AND ELEVATING LEAD SCREWS MICROPROCESSOR CONTROL SYSTEM FOR EASE OF OPERATION AND TROUBLE FREE PRODUCTION HARDENED AND GROUND GUIDE WAYS FOR DURABILITY QUICK TABLE AND CROSS FEED STROKE ADJUSTING DEVICE CENTRALIZED OPERATOR CONTROL
|
🔒 Subscribe | |
|
|
BRIDGEPORT | SERIES II SPECIAL |
BRIDGEPORT SERIES II SPECIAL CNC MILL W/EZ TRACK CNC VICES NOT INCLUDED TOOLING PICTURED IS INCLUDED POWER DRAW BAR TABL 11" X 58" EZ TRACK CNC CONTROLLER 3 PHASE 240V SPINDLE TAPER: R-8 LUBE UNIT RPM 60-3600 LONGITUDINAL TRAVEL: 33.5 CROSS TRAVEL: 15 QUILL TRAVEL: 5 KNEE TRAVEL: 12"
|
🔒 Subscribe | |
|
|
PULLMAX | 48 NIBBLER, P7 |
PULLMAX 48 NIBBLER, P7 NO TOOLING INCLUDED
|
🔒 Subscribe | |
|
|
WELLSAW | V-20 |
WELLSAW V-20 VERTICAL BAND SAW 240V THROAT......................................20" TABLE TO GUIDE.........................16" V-20-24....................................24" BLADE LENGTH...........................177" BAND WHEEL.............................21" BLADE SPEED LOW....................45-400 SFPM BLADE SPEED HIGH...................325-3,000 SFPM TABLE SIZE...............................26" X 26" MACHINE APPROXIMATE DIMENSIONS: FLOOR SPACE............................48" X 28" WEIGHT....................................700 LBS.
|
🔒 Subscribe | |
|
|
DAVIS | 15 |
DAVIS 15 KEY SEATER W/TOOLING TOOLING AND BENCH INCLUDED
|
🔒 Subscribe | |
|
|
1996 | IKEDA | 1175 |
1996 IKEDA 1175 RADIAL ARM DRILL 4' X 13"
|
🔒 Subscribe |
|
|
BRIDGEPORT | SERIES I |
BRIDGEPORT SERIES I 2HP W/DRO VICE NOT INCLUDED TOOLING PICTURED IS INCLUDED
|
🔒 Subscribe | |
|
|
BRIDGEPORT | SERIES I |
BRIDGEPORT SERIES I 2HP W/DRO TOOLING PICTURED IS INCLUDED
|
🔒 Subscribe | |
|
|
LEBLOND | 15" X 50" |
LEBLOND 15" X 50" LATHE 2.25 THRU SPINDLE HOLE STEADY REST 3 PHASE 230V 80-1800 RPM
|
🔒 Subscribe | |
|
|
1996 | IKEDA | 1175 |
1996 IKEDA 1175 RADIAL DRILL INCLUDES TABLE, VICES, JACOBS CHUCK
|
🔒 Subscribe |
|
|
LEBLOND | 15" X 54" |
LEBLOND 15" X 54" LATHE W/DRO 1.75" THRU SPINDLE HOLE 80-1160 RPM
|
🔒 Subscribe | |
|
|
QUICK BOY | FLEXIBLE TAPPING TABLE |
QUICK BOY FLEXIBLE TAPPING TABLE W/VICES INCLUDES ALL TOOLING PICTURED
|
🔒 Subscribe | |
|
|
2016 | INNOTEK | MIST 215113A |
2016 INNOTEK MIST 215113A HYDRAULIC SYSTEM
|
🔒 Subscribe |
|
|
WELLSAW | 1016 |
WELLSAW 1016 HORIZONTAL BAND SAW 10" X 16"
|
🔒 Subscribe | |
|
|
KURT |
KURT VICE FIXTURE W/ CART
|
🔒 Subscribe | ||
|
|
6 DRAWER TOOLING CABINET W/CONTENTS
|
🔒 Subscribe | |||
|
|
SPOTCO |
SPOTCO RESISTANCE WELDER 18" THROAT
|
🔒 Subscribe | ||
|
|
8 DRAWER TOOLING CABINET W/CONTENTS
|
🔒 Subscribe | |||
|
|
6 DRAWER TOOLING CABINET W/CONTENTS
|
🔒 Subscribe | |||
|
|
DRILL PRESS
|
🔒 Subscribe | |||
|
|
LOT OF LATHE TOOLING W/CABINET. ALL PICTURED ITEMS INCLUDED, INCLUDED CABINET. CABINET MUST BE TAKEN AS WELL.
|
🔒 Subscribe | |||
|
|
BRIDGEPORT |
BRIDGEPORT TOOLING W/CABINET. ALL ITEMS PICTURED INCLUDED, MUST TAKE CABINET.
|
🔒 Subscribe | ||
|
|
QUICK BOY FLEXIBLE TAPPING TABLE |
QUICK BOY FLEXIBLE TAPPING TABLE SPECS WILL BE UPDATED
|
🔒 Subscribe | ||
|
|
THERMAL HEAT TREAT FURNACE
|
🔒 Subscribe | |||
|
|
DRILL PRESS
|
🔒 Subscribe | |||
|
|
LOT OF MISC LATHE AND DRILL TOOLING W/CABINET ALL PICTURED ITEMS INCLUDED, MUST TAKE CABINET AS WELL
|
🔒 Subscribe | |||
|
|
LOT OF HELI COIL THREAD REPAIR KITS AND MISC SIZES THREADS
|
🔒 Subscribe | |||
|
|
LANDIS |
LANDIS DIE HEADS AND THREADS
|
🔒 Subscribe | ||
|
|
HARDINGE | HC |
HARDINGE HC AUTOMATIC CHUCKER LATHE W/TOOLING. TOOLING AND BENCH INCLUDED. EIGHT STATION CROSS FEEDING TURRET WITH ADJUSTABLE STATIONS. LOW SPEEDS 125-1,100 R.P.M. HIGH SPEEDS 1,100-3,000 R.P.M. 3 PHASE 220V 1HP
|
🔒 Subscribe | |
|
|
GROB | #4V-18 |
GROB #4V-18 18" VERTICAL BAND SAW
|
🔒 Subscribe | |
|
|
ELECTRA | #121925 |
ELECTRA #121925 HEAT TREAT FURNACE
|
🔒 Subscribe | |
|
|
KURT | DX6 6" |
KURT DX6 6" MACHINE VISE
|
🔒 Subscribe | |
|
|
HYDMECH | PH-211 |
HYDMECH PH-211 BANDSAW
|
🔒 Subscribe | |
|
|
KURT | DX6 |
KURT DX6 6" MACHINE VISE
|
🔒 Subscribe | |
|
|
LOT OF LATHE TOOLING
|
🔒 Subscribe | |||
|
|
LUBOW | RR2 RING ROLLER |
LUBOW RR2 RING ROLLER
|
🔒 Subscribe | |
|
|
MEDINA | B |
MEDINA B SWIVEL VERTICAL END GRINDER NO DUST COLLECTION SYSTEM INCLUDED
|
🔒 Subscribe | |
|
|
AMES | PORTABLE HARDNESS TESTER |
AMES PORTABLE HARDNESS TESTER
|
🔒 Subscribe | |
|
|
PEXTO | 4' X 18" POWER SLIP ROLL |
PEXTO 4' X 18" POWER SLIP ROLL
|
🔒 Subscribe | |
|
|
CLAUSING | 20 |
CLAUSING 20 VARIABLE SPEED DRILL PRESS
|
🔒 Subscribe | |
|
|
CLAUSING | 20 |
CLAUSING 20 FLOOR DRILL PRESS TABLE 15.5" X 18"
|
🔒 Subscribe | |
|
|
STARRETT |
LOT OF STARRETT MEASURING TOOLS
|
🔒 Subscribe | ||
|
|
WILTON | 2" BELT SANDER |
WILTON 2" BELT SANDER W/STAND
|
🔒 Subscribe | |
|
|
ASSORTMENT OF TAPS & DIES INCLUDES (2) ORGANIZERS
|
🔒 Subscribe | |||
|
|
IKEDA | RADIAL DRILL |
IKEDA RADIAL DRILLINCLUDES TABLE
|
🔒 Subscribe | |
|
|
YUASA | 550-048 |
YUASA 550-048 8" HORIZONTAL VERTICAL ROTARY TABLE
|
🔒 Subscribe |
2016 MILLTRONICS VM2515
CNC MACHINE CENTERS
2016 MILLTRONICS VM2515 VERTICAL MACHINING CENTER MACHINE SPECIFICATIONS CAPACITIES TABLE: 30 X 16 X...
Hammer Price:
🔒
2010 MILLTRONICS ML16
CNC MACHINE CENTERS
2010 MILLTRONICS ML16 CNC LATHE MACHINE SPECIFICATIONS: CAPACITY: X-AXIS TRAVEL............11" Z-AXI...
Hammer Price:
🔒
2016 COMAC 305 HV4
METALWORKING & FABRICATION EQUIPMENT
2016 COMAC 305 HV4 SECTION BENDER...
Hammer Price:
🔒
GEKA HYDRACROP #80/A
METALWORKING & FABRICATION EQUIPMENT
80 TON GEKA HYDRACROP #80/A HYDRAULIC IRONWORKER...
Hammer Price:
🔒
OKAMOTO ACC-12.24ST
METALWORKING & FABRICATION EQUIPMENT
OKAMOTO ACC-12.24ST SURFACE GRINDER 12 X 24 FINE ELECTROMAGNETIC CHUCK 3-AXIS FULLY AUTOMATIC AND PL...
Hammer Price:
🔒
BRIDGEPORT SERIES II SPECIAL
CNC MACHINE CENTERS
BRIDGEPORT SERIES II SPECIAL CNC MILL W/EZ TRACK CNC VICES NOT INCLUDED TOOLING PICTURED IS INCLUDED...
Hammer Price:
🔒
PULLMAX 48 NIBBLER, P7
METALWORKING & FABRICATION EQUIPMENT
PULLMAX 48 NIBBLER, P7 NO TOOLING INCLUDED...
Hammer Price:
🔒
WELLSAW V-20
WOODWORKING EQUIPMENT
WELLSAW V-20 VERTICAL BAND SAW 240V THROAT......................................20" TABLE TO GUIDE.....
Hammer Price:
🔒
BRIDGEPORT SERIES I
CNC MACHINE CENTERS
BRIDGEPORT SERIES I 2HP W/DRO VICE NOT INCLUDED TOOLING PICTURED IS INCLUDED...
Hammer Price:
🔒
BRIDGEPORT SERIES I
CNC MACHINE CENTERS
BRIDGEPORT SERIES I 2HP W/DRO TOOLING PICTURED IS INCLUDED...
Hammer Price:
🔒
LEBLOND 15" X 50"
METALWORKING & FABRICATION EQUIPMENT
LEBLOND 15" X 50" LATHE 2.25 THRU SPINDLE HOLE STEADY REST 3 PHASE 230V 80-1800 RPM...
Hammer Price:
🔒
1996 IKEDA 1175
CNC MACHINE CENTERS
1996 IKEDA 1175 RADIAL DRILL INCLUDES TABLE, VICES, JACOBS CHUCK...
Hammer Price:
🔒
LEBLOND 15" X 54"
METALWORKING & FABRICATION EQUIPMENT
LEBLOND 15" X 54" LATHE W/DRO 1.75" THRU SPINDLE HOLE 80-1160 RPM...
Hammer Price:
🔒
QUICK BOY FLEXIBLE TAPPING TABLE
MISC
QUICK BOY FLEXIBLE TAPPING TABLE W/VICES INCLUDES ALL TOOLING PICTURED...
Hammer Price:
🔒
MISC
LOT OF LATHE TOOLING W/CABINET. ALL PICTURED ITEMS INCLUDED, INCLUDED CABINET. CABINET MUST BE TAKEN...
Hammer Price:
🔒
BRIDGEPORT
METALWORKING & FABRICATION EQUIPMENT
BRIDGEPORT TOOLING W/CABINET. ALL ITEMS PICTURED INCLUDED, MUST TAKE CABINET....
Hammer Price:
🔒
QUICK BOY FLEXIBLE TAPPING TABLE
MISC
QUICK BOY FLEXIBLE TAPPING TABLE SPECS WILL BE UPDATED...
Hammer Price:
🔒
MISC
LOT OF MISC LATHE AND DRILL TOOLING W/CABINET ALL PICTURED ITEMS INCLUDED, MUST TAKE CABINET AS WELL...
Hammer Price:
🔒
HARDINGE HC
METALWORKING & FABRICATION EQUIPMENT
HARDINGE HC AUTOMATIC CHUCKER LATHE W/TOOLING. TOOLING AND BENCH INCLUDED. EIGHT STATION CROSS FEEDI...
Hammer Price:
🔒
MEDINA B
METALWORKING & FABRICATION EQUIPMENT
MEDINA B SWIVEL VERTICAL END GRINDER NO DUST COLLECTION SYSTEM INCLUDED...
Hammer Price:
🔒
AMES PORTABLE HARDNESS TESTER
TEST, MEASUREMENT & QUALITY EQUIPMENT
AMES PORTABLE HARDNESS TESTER...
Hammer Price:
🔒
PEXTO 4' X 18" POWER SLIP ROLL
METALWORKING & FABRICATION EQUIPMENT
PEXTO 4' X 18" POWER SLIP ROLL...
Hammer Price:
🔒
CLAUSING 20
METALWORKING & FABRICATION EQUIPMENT
CLAUSING 20 VARIABLE SPEED DRILL PRESS...
Hammer Price:
🔒
IKEDA RADIAL DRILL
METALWORKING & FABRICATION EQUIPMENT
IKEDA RADIAL DRILLINCLUDES TABLE...
Hammer Price:
🔒