Engineering Fabrication and Woodworking Machinery 3 Caltherm StovingCuring Ovens Gantry and Jib Cranes

Pinder Asset Solutions

Category: SURFACE FINISHING EQUIPMENT

Total Lots: 52

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 52 lots

Year	Make	Model	Lot Description	Hammer Price
2018	CALTHERM	HYFIL	2018 CALTHERM HYFIL FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7870E0618, FOR STOVING / CURING OPERATIONS, 0-190 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, THE OVEN WAS SUPPLIED AND INSTALLED IN 2018 TO OEM AEROSPACE MANUFACTURER, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING 2018 · CALTHERM · HYFIL	🔒 Subscribe
	KONECRANES	CXT20410016P16FCLOC	KONECRANES CXT20410016P16FCLOC TRAVELLING GANTRY CRANE, 1000KG, 6M WIDTH, TRAVEL 5M, WIRE ROPE HOIST, 9.5M LIFT HEIGHT, 610AMP, 50HZ, 400VOLTS, WITH REMOTE CONTROL AND CHARGER KONECRANES · CXT20410016P16FCLOC	🔒 Subscribe
2011	ETM	2VS	2011 ETM 2VS TURRET MILLING MACHINE, TABLE 230MM X 1250MM, POWER FEED ON X,Y AND Z, POWER KNEE WITH SILO SDS6-3V 3AXIS DRO, COOLANT AND LOVO LAMP, R8 SPINDLE TAPER, TABLE GUARDS AND EMERGENCY BRAKE, COOLANT AND SWARF TRAY, SAFETY LOCK, 60 TO 4200 RPM, HI LOW, 415VOLTS 2011 · ETM · 2VS	🔒 Subscribe
2017	CALTHERM		2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217B, FOR STOVING / CURING OPERATIONS, 0-160 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, THE OVEN WAS SUPPLIED AND INSTALLED IN 2018 TO OEM AEROSPACE MANUFACTURER, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING 2017 · CALTHERM	🔒 Subscribe
2017	CALTHERM		2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217A, FOR STOVING / CURING OPERATIONS, 0-160 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING 2017 · CALTHERM	🔒 Subscribe
	FSB	MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM	FSB MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM, INCLUDING OIL REMOVAL SIEMENS SIEMATE TOUCH SCREEN CONTROL, DRAWING NUMBER E6499 FSB · MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM	🔒 Subscribe
	STARTRITE	EF SERIES	STARTRITE EF SERIES GEARED HEAD PILLAR DRILL, 12 SPEED, HI-LOW RANGE, 80-2800RPM, INTEGRATED LAMP, RISE AND FALL HEAD AND TABLE, KEY CHUCK AND CHUCK GUARD, T-TABLE 500MM X 390MM, 415VOLTS, 50HZ, 1.4KW STARTRITE · EF SERIES	🔒 Subscribe
2007	FARO	PLATINUM	2007 FARO PLATINUM PORTABLE CMM ARM WITH CASE S/N: P08-02-07-22701 2007 · FARO · PLATINUM	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM (CURRENTLY CONFIGURED TO RUN WITH LOTS 40 AND 41, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY) 2006 · ATLAS COPCO · GX15	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080025 2014 · OPTIMUM · OPTI DRILL DH32 GS	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080028 2014 · OPTIMUM · OPTI DRILL DH32 GS	🔒 Subscribe
	BRIDGEPORT	2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE	BRIDGEPORT 2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE, TABLE 14IN X 56IN, 2 HORIZONTAL MILLING ARBOR SUPPORTS, POWER FEEDS, TABLE GUARD, LOVO LAMP, NO.50 INT SPINDLE TAPER, HORIZONTAL MILLING ARBOR, SWARF TRAY, NO DRIVE TO CONNECT UNIVERSAL HEAD BRIDGEPORT · 2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 03401 (CURRENTLY CONFIGURED TO RUN WITH LOTS 39 AND 40, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY) 2006 · ATLAS COPCO · GX15	🔒 Subscribe
	FSB		FSB SWARF COMPACTING AND BRIQUETTING MACHINE, 850MM DIAMETER HOPPER FEED UNIT, GOOSE NECK FEED CONVEYOR, CONTROL PANEL, INDEPENDENT SHREDDING UNIT AND CONVEYOR TRANSFER FSB	🔒 Subscribe
	WADKIN BURSGREEN	U22/18	WADKIN BURSGREEN U22/18 CHISEL MORTISER WITH LOVO LAMP S/N: U764856 WADKIN BURSGREEN · U22/18	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080027 2014 · OPTIMUM · OPTI DRILL DH32 GS	🔒 Subscribe
	WADKIN BURSGREEN	FM	WADKIN BURSGREEN FM PLANER THICKNESSER, 24IN WIDTH, ADJUSTABLE FENCE, EMERGENCY STOP, SERIAL NUMBER FM143, TEST NUMBER 59369, 415VOLTS WADKIN BURSGREEN · FM	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5714080055 2014 · OPTIMUM · OPTI DRILL DH32 GS	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5714080055 2014 · OPTIMUM · OPTI DRILL DH32 GS	🔒 Subscribe
	BRIDGEPORT	BRJ 1HP	BRIDGEPORT BRJ 1HP VERTICAL AND TURRET MILLING MACHINE, POWER FEED, TABLE 9IN X 42IN, 8 SPEEDS, 67-2300RPM, HEIDENHAIN 3 AXIS DRO, R8 SPINDLE TAPER, 4IN RISER BLOCK, 6IN MACHINE VICE, SERIAL NUMBER 2690D, 415VOLTS BRIDGEPORT · BRJ 1HP	🔒 Subscribe
			10 BAYS BOLTLESS PALLET RACKING COMPRISING 13 UPRIGHTS 4000MM X 900MM, 40 BEAMS 2850MM, DISMANTLED AND READY FOR COLLECTION	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 09124 (CURRENTLY CONFIGURED TO RUN WITH LOTS 39 AND 41, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY) 2006 · ATLAS COPCO · GX15	🔒 Subscribe
			BEAD BLAST CABINET, 2000MM X 1000MM X 1450MM INTERNAL CABINET SIZE, WITH FILTRATION/CIRCULATION AND GANTRY	🔒 Subscribe
	HOLROYD		HOLROYD WORM MILLING MACHINE, 12IN X 24IN CAPACITY HOLROYD	🔒 Subscribe
1969	HOLROYD		1969 HOLROYD WORM GRINDING MACHINE, PATENT 2349, 14IN X 36IN CAPACITY 1969 · HOLROYD	🔒 Subscribe
	MICHIGAN TOOLS		MICHIGAN TOOLS FACING LATHE, 30IN SWING OVER SADDLE, 24IN BCC, DRAWING NUMBER 1700 S/N: 573 MICHIGAN TOOLS	🔒 Subscribe
	HERBERT	4-HEAD INLINE PILLAR DRILL	HERBERT 4-HEAD INLINE PILLAR DRILL, 2 HAND FEED HEADS, 2 POWER FEED HEADS S/N: F43837 HERBERT · 4-HEAD INLINE PILLAR DRILL	🔒 Subscribe
	SPRINT		SPRINT FLOOR MOUNTED SWING JIG CRANE, 3M ARM, 2M TRAVERSE, 3M UNDER HOOK, SWL 500KG, S/N: 10108 SPRINT	🔒 Subscribe
	WADKIN BURSGREEN	400 BRA	WADKIN BURSGREEN 400 BRA RADIAL ARM CROSS CUT SAW, 400MM CAPACITY, HEAD PIVOTS, 415VOLTS S/N: 84420 WADKIN BURSGREEN · 400 BRA	🔒 Subscribe
	PRATT BERNERD	4-JAW CHUCK	PRATT BERNERD 4-JAW CHUCK, 16IN, FACE PLATE 27IN, CAMLOCK TERMINATION, STEADY REST, 3 POINT, FIXED, 9IN CENTRE HEIGHT, TO PALLET PRATT BERNERD · 4-JAW CHUCK	🔒 Subscribe
	HANCOCK	FALCON S	HANCOCK FALCON S OXYPROPANE PROFILE CUTTER WITH BURNY 3 CNC CONTROL, DAVRO ANDERSON WATER TABLE, 3500MM X 1980MM HANCOCK · FALCON S	🔒 Subscribe
	STARTRITE	316H	STARTRITE 316H VERTICAL BANDSAW, 36IN THROAT, WITH BLADE WELDER, GRINDER AND POWER FEED S/N: 33640 STARTRITE · 316H	🔒 Subscribe
2017	KONECRANES		2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL 2017 · KONECRANES	🔒 Subscribe
2017	KONECRANES		2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL 2017 · KONECRANES	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL MORRIS	🔒 Subscribe
	STARTRITE	502	STARTRITE 502 VERTICAL BANDSAW, 500MM THROAT, 415VOLTS S/N: 109204 STARTRITE · 502	🔒 Subscribe
	WADKIN BURSGREEN	BEC2	WADKIN BURSGREEN BEC2 SPINDLE MOULDER, TABLE SIZE 750MM X 910MM, 415VOLTS S/N: 78512 WADKIN BURSGREEN · BEC2	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL MORRIS	🔒 Subscribe
	ASTRA	FSG-618	ASTRA FSG-618 SURFACE GRINDER, 6IN X 18IN, WITH COOLANT, 415VOLTS ASTRA · FSG-618	🔒 Subscribe
			FACE PLATE, 300MM AND 200MM, 4-JAW CHUCK, CAMLOCK TERMINATION FOR TOOLROOM LATHE	🔒 Subscribe
	HIROSS	STARLETTE	HIROSS STARLETTE COMPRESSED AIR DRYER S/N: 2863740001 HIROSS · STARLETTE	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC GIRDER HOIST, 500KG, WITH GIRDER RUNNER, NO PENDANT MORRIS	🔒 Subscribe
	KCI		KCI ELECTRIC HOIST, 500KG, PENDANT CONTROL, WITH GIRDER, 2400MM TRAVEL KCI	🔒 Subscribe
			APPROX 50 TAPER TOOL HOLDERS FOR VMC OR MILLING MACHINERY	🔒 Subscribe
	BUTLER	21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER	BUTLER 21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER, 21IN MAX STROKE, 7IN MIN STROKE, 6 SPEED 9-28SPM RANGE, 45IN T SLOT ROUND TABLE, INCLINABLE TABLE FUNCTION, 15HP MAIN DRIVE, LATERAL TABLE TRAVERSE 33IN, REPLACED ELECTRICAL CONTROLS, OPERATOR PENDANT CONTROL, WEIGHT APPROX. 9.5TONNES, SERIAL NUMBER 23078/2 BUTLER · 21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER	🔒 Subscribe
2005	DANOBAT	CR420AN	2005 DANOBAT CR420AN DOUBLE COLUMN AUTOMATIC HORIZONTAL BANDSAW, 420MM, TOUCH SCREEN PLC CONTROL, POWER CLAMPING, AUTO INFEED, SCREW TYPE SWARF REMOVAL, COOLANT, 11K MAINS SUPPLY, INSTRUCTION MANUAL, 415VOLTS, 50HZ, WEIGHT 3300KG, S/N: 0105900512 2005 · DANOBAT · CR420AN	🔒 Subscribe
	BROWN & HOLMES	STEADY FOR CHURCHILL HC4/5	BROWN & HOLMES STEADY FOR CHURCHILL HC4/5 CNC SLANT BED LATHE, WITH FANUC GT CONTROL BROWN & HOLMES · STEADY FOR CHURCHILL HC4/5	🔒 Subscribe
	CHURCHILL	HC4/15	CHURCHILL HC4/15 CNC SLANT BED LATHE WITH FANUC SYSTEM 6T CONTROL S/N: 20187 CHURCHILL · HC4/15	🔒 Subscribe
	RUSCH	RBSA 1	RUSCH RBSA 1 HORIZONTAL BANDSAW, 12IN HORIZONTAL, 10IN VERTICAL S/N: 42422 RUSCH · RBSA 1	🔒 Subscribe
	STARTRITE	METORA UMB220	STARTRITE METORA UMB220 HORIZONTAL BANDSAW, 220MM, COOLANT, 1.1KW, 415VOLTS S/N: 5172019 STARTRITE · METORA UMB220	🔒 Subscribe

Year	Make	Model	Description	Price
2018	CALTHERM	HYFIL	2018 CALTHERM HYFIL FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7870E0618, FOR STOVING / CURING OPERATIONS, 0-190 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, THE OVEN WAS SUPPLIED AND INSTALLED IN 2018 TO OEM AEROSPACE MANUFACTURER, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING	🔒 Subscribe
	KONECRANES	CXT20410016P16FCLOC	KONECRANES CXT20410016P16FCLOC TRAVELLING GANTRY CRANE, 1000KG, 6M WIDTH, TRAVEL 5M, WIRE ROPE HOIST, 9.5M LIFT HEIGHT, 610AMP, 50HZ, 400VOLTS, WITH REMOTE CONTROL AND CHARGER	🔒 Subscribe
2011	ETM	2VS	2011 ETM 2VS TURRET MILLING MACHINE, TABLE 230MM X 1250MM, POWER FEED ON X,Y AND Z, POWER KNEE WITH SILO SDS6-3V 3AXIS DRO, COOLANT AND LOVO LAMP, R8 SPINDLE TAPER, TABLE GUARDS AND EMERGENCY BRAKE, COOLANT AND SWARF TRAY, SAFETY LOCK, 60 TO 4200 RPM, HI LOW, 415VOLTS	🔒 Subscribe
2017	CALTHERM		2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217B, FOR STOVING / CURING OPERATIONS, 0-160 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, THE OVEN WAS SUPPLIED AND INSTALLED IN 2018 TO OEM AEROSPACE MANUFACTURER, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING	🔒 Subscribe
2017	CALTHERM		2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217A, FOR STOVING / CURING OPERATIONS, 0-160 DEGREES TEMP RANGE, EUROTHERM 6100A, 3216 AND 3508 DIGITAL CHART RECORDER, TEMPERATURE AND OVEN CONTROLS, TEC ELECTRIC FURNACE VERTICAL ELECTRIC POWERED DOOR, HYDRAULIC POWER PACK, APPROXIMATE CHAMBER DIMENSIONS 1000MM X 1700MM X 3000MM, REAR MOUNTED ELECTRIC CIRCULATION FAN, RAPID EXHAUST COOLING SYSTEM TO ATMOSPHERE, EXTERNAL DIMENSIONS 3200MM L-R, 5000MM F-B, 2200MM T-B, APPLICATIONS PAINT/POWDER COATING/SURFACE FINISHING	🔒 Subscribe
	FSB	MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM	FSB MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM, INCLUDING OIL REMOVAL SIEMENS SIEMATE TOUCH SCREEN CONTROL, DRAWING NUMBER E6499	🔒 Subscribe
	STARTRITE	EF SERIES	STARTRITE EF SERIES GEARED HEAD PILLAR DRILL, 12 SPEED, HI-LOW RANGE, 80-2800RPM, INTEGRATED LAMP, RISE AND FALL HEAD AND TABLE, KEY CHUCK AND CHUCK GUARD, T-TABLE 500MM X 390MM, 415VOLTS, 50HZ, 1.4KW	🔒 Subscribe
2007	FARO	PLATINUM	2007 FARO PLATINUM PORTABLE CMM ARM WITH CASE S/N: P08-02-07-22701	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM (CURRENTLY CONFIGURED TO RUN WITH LOTS 40 AND 41, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY)	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080025	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080028	🔒 Subscribe
	BRIDGEPORT	2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE	BRIDGEPORT 2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE, TABLE 14IN X 56IN, 2 HORIZONTAL MILLING ARBOR SUPPORTS, POWER FEEDS, TABLE GUARD, LOVO LAMP, NO.50 INT SPINDLE TAPER, HORIZONTAL MILLING ARBOR, SWARF TRAY, NO DRIVE TO CONNECT UNIVERSAL HEAD	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 03401 (CURRENTLY CONFIGURED TO RUN WITH LOTS 39 AND 40, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY)	🔒 Subscribe
	FSB		FSB SWARF COMPACTING AND BRIQUETTING MACHINE, 850MM DIAMETER HOPPER FEED UNIT, GOOSE NECK FEED CONVEYOR, CONTROL PANEL, INDEPENDENT SHREDDING UNIT AND CONVEYOR TRANSFER	🔒 Subscribe
	WADKIN BURSGREEN	U22/18	WADKIN BURSGREEN U22/18 CHISEL MORTISER WITH LOVO LAMP S/N: U764856	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5713080027	🔒 Subscribe
	WADKIN BURSGREEN	FM	WADKIN BURSGREEN FM PLANER THICKNESSER, 24IN WIDTH, ADJUSTABLE FENCE, EMERGENCY STOP, SERIAL NUMBER FM143, TEST NUMBER 59369, 415VOLTS	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5714080055	🔒 Subscribe
2014	OPTIMUM	OPTI DRILL DH32 GS	2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400MM X 420MM T SLOT RISE AND FALL TABLE, SPINDLE AND FOOT BRAKE, 1.5-2.2KW, 8 SPEED, HI LO RANGE, 75-2000RPM, 415VOLTS S/N: J5714080055	🔒 Subscribe
	BRIDGEPORT	BRJ 1HP	BRIDGEPORT BRJ 1HP VERTICAL AND TURRET MILLING MACHINE, POWER FEED, TABLE 9IN X 42IN, 8 SPEEDS, 67-2300RPM, HEIDENHAIN 3 AXIS DRO, R8 SPINDLE TAPER, 4IN RISER BLOCK, 6IN MACHINE VICE, SERIAL NUMBER 2690D, 415VOLTS	🔒 Subscribe
			10 BAYS BOLTLESS PALLET RACKING COMPRISING 13 UPRIGHTS 4000MM X 900MM, 40 BEAMS 2850MM, DISMANTLED AND READY FOR COLLECTION	🔒 Subscribe
2006	ATLAS COPCO	GX15	2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 09124 (CURRENTLY CONFIGURED TO RUN WITH LOTS 39 AND 41, WILL REQUIRE SOME REWIRING TO RUN INDIVIDUALLY)	🔒 Subscribe
			BEAD BLAST CABINET, 2000MM X 1000MM X 1450MM INTERNAL CABINET SIZE, WITH FILTRATION/CIRCULATION AND GANTRY	🔒 Subscribe
	HOLROYD		HOLROYD WORM MILLING MACHINE, 12IN X 24IN CAPACITY	🔒 Subscribe
1969	HOLROYD		1969 HOLROYD WORM GRINDING MACHINE, PATENT 2349, 14IN X 36IN CAPACITY	🔒 Subscribe
	MICHIGAN TOOLS		MICHIGAN TOOLS FACING LATHE, 30IN SWING OVER SADDLE, 24IN BCC, DRAWING NUMBER 1700 S/N: 573	🔒 Subscribe
	HERBERT	4-HEAD INLINE PILLAR DRILL	HERBERT 4-HEAD INLINE PILLAR DRILL, 2 HAND FEED HEADS, 2 POWER FEED HEADS S/N: F43837	🔒 Subscribe
	SPRINT		SPRINT FLOOR MOUNTED SWING JIG CRANE, 3M ARM, 2M TRAVERSE, 3M UNDER HOOK, SWL 500KG, S/N: 10108	🔒 Subscribe
	WADKIN BURSGREEN	400 BRA	WADKIN BURSGREEN 400 BRA RADIAL ARM CROSS CUT SAW, 400MM CAPACITY, HEAD PIVOTS, 415VOLTS S/N: 84420	🔒 Subscribe
	PRATT BERNERD	4-JAW CHUCK	PRATT BERNERD 4-JAW CHUCK, 16IN, FACE PLATE 27IN, CAMLOCK TERMINATION, STEADY REST, 3 POINT, FIXED, 9IN CENTRE HEIGHT, TO PALLET	🔒 Subscribe
	HANCOCK	FALCON S	HANCOCK FALCON S OXYPROPANE PROFILE CUTTER WITH BURNY 3 CNC CONTROL, DAVRO ANDERSON WATER TABLE, 3500MM X 1980MM	🔒 Subscribe
	STARTRITE	316H	STARTRITE 316H VERTICAL BANDSAW, 36IN THROAT, WITH BLADE WELDER, GRINDER AND POWER FEED S/N: 33640	🔒 Subscribe
2017	KONECRANES		2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL	🔒 Subscribe
2017	KONECRANES		2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL	🔒 Subscribe
	STARTRITE	502	STARTRITE 502 VERTICAL BANDSAW, 500MM THROAT, 415VOLTS S/N: 109204	🔒 Subscribe
	WADKIN BURSGREEN	BEC2	WADKIN BURSGREEN BEC2 SPINDLE MOULDER, TABLE SIZE 750MM X 910MM, 415VOLTS S/N: 78512	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL	🔒 Subscribe
	ASTRA	FSG-618	ASTRA FSG-618 SURFACE GRINDER, 6IN X 18IN, WITH COOLANT, 415VOLTS	🔒 Subscribe
			FACE PLATE, 300MM AND 200MM, 4-JAW CHUCK, CAMLOCK TERMINATION FOR TOOLROOM LATHE	🔒 Subscribe
	HIROSS	STARLETTE	HIROSS STARLETTE COMPRESSED AIR DRYER S/N: 2863740001	🔒 Subscribe
	MORRIS		MORRIS ELECTRIC GIRDER HOIST, 500KG, WITH GIRDER RUNNER, NO PENDANT	🔒 Subscribe
	KCI		KCI ELECTRIC HOIST, 500KG, PENDANT CONTROL, WITH GIRDER, 2400MM TRAVEL	🔒 Subscribe
			APPROX 50 TAPER TOOL HOLDERS FOR VMC OR MILLING MACHINERY	🔒 Subscribe
	BUTLER	21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER	BUTLER 21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER, 21IN MAX STROKE, 7IN MIN STROKE, 6 SPEED 9-28SPM RANGE, 45IN T SLOT ROUND TABLE, INCLINABLE TABLE FUNCTION, 15HP MAIN DRIVE, LATERAL TABLE TRAVERSE 33IN, REPLACED ELECTRICAL CONTROLS, OPERATOR PENDANT CONTROL, WEIGHT APPROX. 9.5TONNES, SERIAL NUMBER 23078/2	🔒 Subscribe
2005	DANOBAT	CR420AN	2005 DANOBAT CR420AN DOUBLE COLUMN AUTOMATIC HORIZONTAL BANDSAW, 420MM, TOUCH SCREEN PLC CONTROL, POWER CLAMPING, AUTO INFEED, SCREW TYPE SWARF REMOVAL, COOLANT, 11K MAINS SUPPLY, INSTRUCTION MANUAL, 415VOLTS, 50HZ, WEIGHT 3300KG, S/N: 0105900512	🔒 Subscribe
	BROWN & HOLMES	STEADY FOR CHURCHILL HC4/5	BROWN & HOLMES STEADY FOR CHURCHILL HC4/5 CNC SLANT BED LATHE, WITH FANUC GT CONTROL	🔒 Subscribe
	CHURCHILL	HC4/15	CHURCHILL HC4/15 CNC SLANT BED LATHE WITH FANUC SYSTEM 6T CONTROL S/N: 20187	🔒 Subscribe
	RUSCH	RBSA 1	RUSCH RBSA 1 HORIZONTAL BANDSAW, 12IN HORIZONTAL, 10IN VERTICAL S/N: 42422	🔒 Subscribe
	STARTRITE	METORA UMB220	STARTRITE METORA UMB220 HORIZONTAL BANDSAW, 220MM, COOLANT, 1.1KW, 415VOLTS S/N: 5172019	🔒 Subscribe

2018 CALTHERM HYFIL

SURFACE FINISHING EQUIPMENT

2018 CALTHERM HYFIL FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7870E0618, FOR STOVING / CURI...

Hammer Price: 🔒

KONECRANES CXT20410016P16FCLOC

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KONECRANES CXT20410016P16FCLOC TRAVELLING GANTRY CRANE, 1000KG, 6M WIDTH, TRAVEL 5M, WIRE ROPE HOIST...

Hammer Price: 🔒

2011 ETM 2VS

CNC MACHINE CENTERS

2011 ETM 2VS TURRET MILLING MACHINE, TABLE 230MM X 1250MM, POWER FEED ON X,Y AND Z, POWER KNEE WITH ...

Hammer Price: 🔒

2017 CALTHERM

SURFACE FINISHING EQUIPMENT

2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217B, FOR STOVING ...

Hammer Price: 🔒

2017 CALTHERM

SURFACE FINISHING EQUIPMENT

2017 CALTHERM PAINT OVEN FREESTANDING MEDIUM SIZED GAS FIRED BOX OVEN S/N: J7819E1217A, FOR STOVING ...

Hammer Price: 🔒

FSB MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM

MISC

FSB MOBILE SWARF COMPACTING AND BRIQUETTING MACHINE/MANAGEMENT SYSTEM, INCLUDING OIL REMOVAL SIEMENS...

Hammer Price: 🔒

STARTRITE EF SERIES

WOODWORKING EQUIPMENT

STARTRITE EF SERIES GEARED HEAD PILLAR DRILL, 12 SPEED, HI-LOW RANGE, 80-2800RPM, INTEGRATED LAMP, R...

Hammer Price: 🔒

2007 FARO PLATINUM

TEST, MEASUREMENT & QUALITY EQUIPMENT

2007 FARO PLATINUM PORTABLE CMM ARM WITH CASE S/N: P08-02-07-22701...

Hammer Price: 🔒

2006 ATLAS COPCO GX15

AIR COMPRESSORS

2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM (CURRENTLY CONFI...

Hammer Price: 🔒

2014 OPTIMUM OPTI DRILL DH32 GS

WOODWORKING EQUIPMENT

2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400M...

Hammer Price: 🔒

2014 OPTIMUM OPTI DRILL DH32 GS

WOODWORKING EQUIPMENT

2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400M...

Hammer Price: 🔒

BRIDGEPORT 2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE

WOODWORKING EQUIPMENT

BRIDGEPORT 2S UNIVERSAL AND HORIZONTAL TABLE MILLING MACHINE, TABLE 14IN X 56IN, 2 HORIZONTAL MILLIN...

Hammer Price: 🔒

2006 ATLAS COPCO GX15

AIR COMPRESSORS

2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 03401 (CU...

Hammer Price: 🔒

FSB

MISC

FSB SWARF COMPACTING AND BRIQUETTING MACHINE, 850MM DIAMETER HOPPER FEED UNIT, GOOSE NECK FEED CONVE...

Hammer Price: 🔒

WADKIN BURSGREEN U22/18

WOODWORKING EQUIPMENT

WADKIN BURSGREEN U22/18 CHISEL MORTISER WITH LOVO LAMP S/N: U764856...

Hammer Price: 🔒

2014 OPTIMUM OPTI DRILL DH32 GS

WOODWORKING EQUIPMENT

2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400M...

Hammer Price: 🔒

WADKIN BURSGREEN FM

WOODWORKING EQUIPMENT

WADKIN BURSGREEN FM PLANER THICKNESSER, 24IN WIDTH, ADJUSTABLE FENCE, EMERGENCY STOP, SERIAL NUMBER ...

Hammer Price: 🔒

2014 OPTIMUM OPTI DRILL DH32 GS

WOODWORKING EQUIPMENT

2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400M...

Hammer Price: 🔒

2014 OPTIMUM OPTI DRILL DH32 GS

WOODWORKING EQUIPMENT

2014 OPTIMUM OPTI DRILL DH32 GS GEARED HEAD FLOOR STANDING PILLAR DRILL, 300MM THROAT, COOLANT, 400M...

Hammer Price: 🔒

BRIDGEPORT BRJ 1HP

WOODWORKING EQUIPMENT

BRIDGEPORT BRJ 1HP VERTICAL AND TURRET MILLING MACHINE, POWER FEED, TABLE 9IN X 42IN, 8 SPEEDS, 67-2...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

10 BAYS BOLTLESS PALLET RACKING COMPRISING 13 UPRIGHTS 4000MM X 900MM, 40 BEAMS 2850MM, DISMANTLED A...

Hammer Price: 🔒

2006 ATLAS COPCO GX15

AIR COMPRESSORS

2006 ATLAS COPCO GX15 RECEIVER MOUNTED SCREW COMPRESSOR, 13BAR, 15KW MOTOR, 2960RPM, HOURS 09124 (CU...

Hammer Price: 🔒

SURFACE FINISHING EQUIPMENT

BEAD BLAST CABINET, 2000MM X 1000MM X 1450MM INTERNAL CABINET SIZE, WITH FILTRATION/CIRCULATION AND ...

Hammer Price: 🔒

HOLROYD

WOODWORKING EQUIPMENT

HOLROYD WORM MILLING MACHINE, 12IN X 24IN CAPACITY...

Hammer Price: 🔒

1969 HOLROYD

METALWORKING & FABRICATION EQUIPMENT

1969 HOLROYD WORM GRINDING MACHINE, PATENT 2349, 14IN X 36IN CAPACITY...

Hammer Price: 🔒

MICHIGAN TOOLS

METALWORKING & FABRICATION EQUIPMENT

MICHIGAN TOOLS FACING LATHE, 30IN SWING OVER SADDLE, 24IN BCC, DRAWING NUMBER 1700 S/N: 573...

Hammer Price: 🔒

HERBERT 4-HEAD INLINE PILLAR DRILL

WOODWORKING EQUIPMENT

HERBERT 4-HEAD INLINE PILLAR DRILL, 2 HAND FEED HEADS, 2 POWER FEED HEADS S/N: F43837...

Hammer Price: 🔒

SPRINT

CONSTRUCTION EQUIPMENT

SPRINT FLOOR MOUNTED SWING JIG CRANE, 3M ARM, 2M TRAVERSE, 3M UNDER HOOK, SWL 500KG, S/N: 10108...

Hammer Price: 🔒

WADKIN BURSGREEN 400 BRA

WOODWORKING EQUIPMENT

WADKIN BURSGREEN 400 BRA RADIAL ARM CROSS CUT SAW, 400MM CAPACITY, HEAD PIVOTS, 415VOLTS S/N: 84420...

Hammer Price: 🔒

PRATT BERNERD 4-JAW CHUCK

METALWORKING & FABRICATION EQUIPMENT

PRATT BERNERD 4-JAW CHUCK, 16IN, FACE PLATE 27IN, CAMLOCK TERMINATION, STEADY REST, 3 POINT, FIXED, ...

Hammer Price: 🔒

HANCOCK FALCON S

METALWORKING & FABRICATION EQUIPMENT

HANCOCK FALCON S OXYPROPANE PROFILE CUTTER WITH BURNY 3 CNC CONTROL, DAVRO ANDERSON WATER TABLE, 350...

Hammer Price: 🔒

STARTRITE 316H

WOODWORKING EQUIPMENT

STARTRITE 316H VERTICAL BANDSAW, 36IN THROAT, WITH BLADE WELDER, GRINDER AND POWER FEED S/N: 33640...

Hammer Price: 🔒

2017 KONECRANES

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL...

Hammer Price: 🔒

2017 KONECRANES

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2017 KONECRANES ELECTRIC HOIST 1TONNE, WIRE ROPE, NO PENDANT CONTROL...

Hammer Price: 🔒

MORRIS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL...

Hammer Price: 🔒

STARTRITE 502

WOODWORKING EQUIPMENT

STARTRITE 502 VERTICAL BANDSAW, 500MM THROAT, 415VOLTS S/N: 109204...

Hammer Price: 🔒

WADKIN BURSGREEN BEC2

WOODWORKING EQUIPMENT

WADKIN BURSGREEN BEC2 SPINDLE MOULDER, TABLE SIZE 750MM X 910MM, 415VOLTS S/N: 78512...

Hammer Price: 🔒

MORRIS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MORRIS ELECTRIC CHAIN HOIST, 1TONNE, WITH PENDANT CONTROL...

Hammer Price: 🔒

ASTRA FSG-618

METALWORKING & FABRICATION EQUIPMENT

ASTRA FSG-618 SURFACE GRINDER, 6IN X 18IN, WITH COOLANT, 415VOLTS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FACE PLATE, 300MM AND 200MM, 4-JAW CHUCK, CAMLOCK TERMINATION FOR TOOLROOM LATHE...

Hammer Price: 🔒

HIROSS STARLETTE

AIR COMPRESSORS

HIROSS STARLETTE COMPRESSED AIR DRYER S/N: 2863740001...

Hammer Price: 🔒

MORRIS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MORRIS ELECTRIC GIRDER HOIST, 500KG, WITH GIRDER RUNNER, NO PENDANT...

Hammer Price: 🔒

KCI

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KCI ELECTRIC HOIST, 500KG, PENDANT CONTROL, WITH GIRDER, 2400MM TRAVEL...

Hammer Price: 🔒

CNC MACHINE CENTERS

APPROX 50 TAPER TOOL HOLDERS FOR VMC OR MILLING MACHINERY...

Hammer Price: 🔒

BUTLER 21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER

CNC MACHINE CENTERS

BUTLER 21IN HEAVY DUTY HIGH PRODUCTION VERTICAL SLOTTER, 21IN MAX STROKE, 7IN MIN STROKE, 6 SPEED 9-...

Hammer Price: 🔒

2005 DANOBAT CR420AN

WOODWORKING EQUIPMENT

2005 DANOBAT CR420AN DOUBLE COLUMN AUTOMATIC HORIZONTAL BANDSAW, 420MM, TOUCH SCREEN PLC CONTROL, PO...

Hammer Price: 🔒

BROWN & HOLMES STEADY FOR CHURCHILL HC4/5

CNC MACHINE CENTERS

BROWN & HOLMES STEADY FOR CHURCHILL HC4/5 CNC SLANT BED LATHE, WITH FANUC GT CONTROL...

Hammer Price: 🔒

CHURCHILL HC4/15

CNC MACHINE CENTERS

CHURCHILL HC4/15 CNC SLANT BED LATHE WITH FANUC SYSTEM 6T CONTROL S/N: 20187...

Hammer Price: 🔒

RUSCH RBSA 1

WOODWORKING EQUIPMENT

RUSCH RBSA 1 HORIZONTAL BANDSAW, 12IN HORIZONTAL, 10IN VERTICAL S/N: 42422...

Hammer Price: 🔒

STARTRITE METORA UMB220

WOODWORKING EQUIPMENT

STARTRITE METORA UMB220 HORIZONTAL BANDSAW, 220MM, COOLANT, 1.1KW, 415VOLTS S/N: 5172019...

Hammer Price: 🔒

1 2 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Engineering Fabrication and Woodworking Machinery 3 Caltherm StovingCuring Ovens Gantry and Jib Cranes

Save to Project Folder

Print Options

Save to Project Folder