Kenco Mold Company

Thompson Auctioneers

Category: WELDING & CUTTING

Total Lots: 231

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 231 lots

Year	Make	Model	Lot Description	Hammer Price
2014	LASERSTAR	5137762002	2014 LASERSTAR 7700 SERIES LASER WELDING SYSTEM WITH UNIVERSAL JIG FOR WELDING LARGE PARTS, 208-240VAC 3PH 50/60HZ 30AMPS S/N:1447133 2014 · LASERSTAR · 5137762002	🔒 Subscribe
1993	PORSCHE	968 CONVERTIBLE	1993 PORSCHE 968 CONVERTIBLE, 2 DOOR COUPE, MILES: 66,747 1993 · PORSCHE · 968 CONVERTIBLE	🔒 Subscribe
	TRAK	DPME2	TRAK DPME2 CNC KNEE MILL WITH PROTO TRAK EDGE3 CONTROL, 220 VOLTAGE TRAK · DPME2	🔒 Subscribe
	SOUTHWESTERN INDUSTRIES	TRAK TRL 1840 CSS	SOUTHWESTERN INDUSTRIES TRAK TRL 1840 CSS LATHE, PROTO TRAX LX3 CONTROLS, SWING OVER BED 18.5 INCH, SWING OVER CARRIAGE 17 INCH, DISTANCE BETWEEN CENTERS 40.25 INCH, SPINDLE NOSE D1-6 CAMLOCK, SPINDLE BORE DIAMETER 2.36 INCH, MAIN SPINDLE SPEEDS 2500 RPM, MAIN SPINDLE DRIVE 10 HP, 220V, 36 AMP, 3 PHASE, 60 HZ S/N:021 BC11590 SOUTHWESTERN INDUSTRIES · TRAK TRL 1840 CSS	🔒 Subscribe
	SOUTHWESTERN	TRAK DPM	SOUTHWESTERN PROTO TRAK DPM CNC VERTICAL BED MILL WITH TRACK A.G.E. 3 CONTROL PANEL. WITH 3 PHASE INDUCTION MOTOR. 200 KA SHORT CIRCUIT INTRPT RTG AC SPINDLE MOTOR, 220 V, 3 PHASE, 60 HZ, 8.5 AMP FULL LOAD CURRENT CNC CONTROL UNIT. MODEL TRAK DPM. S/N:99-4692 SOUTHWESTERN · TRAK DPM	🔒 Subscribe
2004	HURCO	VM2	2004 HURCO VM2 CNC VERTICAL MACHINING CENTER X AXIS: 40 INCH Y AXIS: 18 INCH Z-AXIS TRAVEL 18 INCH TABLE 46 INCH X 18 INCH SPINDLE MOTOR 20 HP SPINDLE SPEEDS 8000 RPM TOOL CAPACITY 16 ATC APPROX. DIMENSIONS 90.5 INCH X 116.1 INCH X 95.5 INCH APPROX. WEIGHT 9000 LBS 2004 · HURCO · VM2	🔒 Subscribe
2007	ST SUPERTEC	STPS18M	2007 ST SUPERTEC STPS18M MANUAL SURFACE GRINDER WITH KANETSU PERMANENT MAGNETIC CHUCK. 220V, 60 CYCLE, 0 PHASE, SUPPLE VOLTAGE 12-110V. 2007 · ST SUPERTEC · STPS18M	🔒 Subscribe
	CHEVALIER	FSG-3A1224H	CHEVALIER FSG-3A1224H HYDRAULIC SURFACE GRINDER TABLE SIZE 12 INCH X 24 INCH TRAVELS X 25.6 INCH Y 14.17 INCH Z 21 RPM 1750 MAX TABLE LOAD 924 LBS WHEEL SIZE 14 X 2 X 5 BORE MAIN MOTOR HP 5 HYDRAULIC MOTOR HP 2 220 VOLT EQUIPPED WITH MAGNETIC CHUCK COOLANT UNIT APPROXIMATE OVERALL DIMENSION 80 X 72 X 80 T APPROXIMATE OVERALL WEIGHT 4630 LBS CHEVALIER · FSG-3A1224H	🔒 Subscribe
	MILLER	SYNCROWAVE 250 DX	MILLER SYNCROWAVE 250 DX CC-AC/DC POWER SOURCE TIG WELDER W/ TIGRUNNER WITH BERNARD 2500SS WELDING TORCH WATER COOLER INPUT: VOLTS: 200/230/460V AMPS: 110/96/48A - 101/88/44A KW: 11.8KW - 10.2KW HERTZ: 60HZ - 50HZ PHASE: 1 S/N:LC256001 MILLER · SYNCROWAVE 250 DX	🔒 Subscribe
	SOUTHWESTERN TRAK	QCM-1	SOUTHWESTERN TRAK QCM-1 VERTICAL 3-AXIS BED MILL, WITH TRAC QMV CONTROL. 220V, 11 AMP, 3 PHASE, 60HZ S/N:993BH10029 SOUTHWESTERN TRAK · QCM-1	🔒 Subscribe
	MILLPORT	PROTO TRAK PLUS	MILLPORT CNC KNEE MILL WITH PROTO TRAK PLUS CONTROL VOLTAGE: 220 MILLPORT · PROTO TRAK PLUS	🔒 Subscribe
			GRANITE SURFACE PLATE AND FRAME	🔒 Subscribe
1995	ACER	3VKH71	1995 ACER ULTIMA 3VKH CNC PROTO TRAK KNEE MILL WITH MX3 CONTROL, 115V 1995 · ACER · 3VKH71	🔒 Subscribe
			40TAPER TOOL HOLDERS WITH TOOLS AND CART	🔒 Subscribe
	HECK INDUSTRIES	3C	HEAVY DUTY WORK TABLE WITH 8 INCH JAW WILTON BENCH VISE, 10 INCH SHEET METAL HAND SHEAR, PERMANENT MAGNETIC LIFTERS: 1000KG, AND A HECK INDUSTRIES TRACE-A-PUNCH DUPLICATING NIBBLER MODEL: 3C S/N: 11747 HECK INDUSTRIES · 3C	🔒 Subscribe
	MILLPORT	SJ-1640G	MILLPORT SJ-1640G HIGH SPEED PRECISION LATHE, MAIN MOTOR: 5 HP, 60 CYCLE, 3 PHASE, 14.5 AMPS, 220V. PUMP MOTOR: 1/8 HP, 60 CYCLE, 3 PHASE, .21 AMPS, 220V MILLPORT · SJ-1640G	🔒 Subscribe
	BRIDGEPORT	CENTER MILLING	BRIDGEPORT CENTER MILLING WITH BRIDGEPORT SLOTTED MILLING ATTACHMENT. 1.5 HP, 3 PHASE, 60 CYCLE, 230V, 4.4 AMP, 1730 RPM. SLOTTED MILLING ATTACHMENT: STROKE 125MM (5 INCH), 5 SPEED, STROKE SPEED ON 60HZ: 35, 54, 79, 112, 160. 3/4 HP 6 POLE MOTOR, 220V 3 PHASE. BRIDGEPORT · CENTER MILLING	🔒 Subscribe
			WELDING TABLE	🔒 Subscribe
			INDUSTRIAL 15 DRAWER CABINET ALL CONTENTS INCLUDED SET SCREWS EPOXY GASKET WASHERS LARGE AND SMALL NUTS 256 540 SCREWS 632 832 SCREWS 1024 1032 SCREWS 1/4-20 SCREWS 5/16-18 SCREWS 3/8-16 SCREWS 1/2-13 SCREWS 5/8-11 SCREWS MISCELLANEOUS SCREWS STRIPPER BOLTS DRYWALL SCREWS SELF DRILLING SCREWS ANCHORS NAILS ROLL PINS THREAD REPAIR EASY OUTS BEARINGS DOWEL PINS DRILL BLANKS SNAP RINGS DIE PUNCHES EYEBOLTS CHAINS	🔒 Subscribe
	SOUTH BEND		SOUTH BEND QUICK CHANGE GEAR LATHE, 10 INCH SWING, 3' BED LENGTH, 115/230V, 1HP S/N:187YN SOUTH BEND	🔒 Subscribe
	YUASA INTERNATIONAL	12	YUASA INTERNATIONAL 12 TILTING ROTARY TABLE S/N: 550-212 YUASA INTERNATIONAL · 12	🔒 Subscribe
			48X36X5 GRANITE SURFACE PLATE	🔒 Subscribe
	HYPERTHERM	POWERMAX 380	HYPERTHERM POWERMAX 380 PLASMA CUTTING SYSTEM WITH HYPERYHERM INCLUDED 100LB CAPACITY WELDING CART S/N:380-008909 HYPERTHERM · POWERMAX 380	🔒 Subscribe
	SOUTH BEND LATHE WORKS	9A	SOUTH BEND LATHE WORKS 9 INCH MODEL A PRECISION LATHE, TOOL POST 65A SOUTH BEND LATHE WORKS · 9A	🔒 Subscribe
	SOUTH BEND	A	SOUTH BEND PRECISION LATHE MODEL A, 1HP, 208-230/460V, BED LENGTH 3.5' S/N:CL81877B SOUTH BEND · A	🔒 Subscribe
	KENNEDY		KENNEDY PORTABLE TOOL CABINET, 11 DRAWERS, GOOD CONDITION KENNEDY	🔒 Subscribe
1996	CUTTERMASTER	HDT-30	1996 CUTTERMASTER HDT-30 END MILL GRINDER, 110V S/N:366 1996 · CUTTERMASTER · HDT-30	🔒 Subscribe
	KENNEDY		KENNEDY ROLLING TOOL CABINET KENNEDY	🔒 Subscribe
			INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED FILES STONES SNAP PINS MACHINE PARTS BRONZE BEARINGS PIPE FITTINGS AIR FITTINGS WATER FITTINGS LOCATING RINGS PINS AND BUSHINGS DIE SPRINGS ASSORTED SPRINGS DIE HANDLES ALLEN WRENCHES DE STACO CLAMPS DIES TAPS POP RIVETS AUTOMOTIVE	🔒 Subscribe
	KENNEDY		KENNEDY 9-DRAWER CABINET KENNEDY	🔒 Subscribe
			INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED 60MM TOOLING 63MM TOOLING 70MM TOOLING HOSE CLAMPS CABLE AND CLAMPS WIRE NUTS BEAM CLAMPS WHOLE SAWS STAMP CLAMPS BULB FUSES SWITCHES TERMINALS WIRE TIES VALVES CLEANER	🔒 Subscribe
	KENNEDY	VERSA-CART	KENNEDY VERSA-CART WITH CONTENTS INCLUDED KENNEDY · VERSA-CART	🔒 Subscribe
	HAMMOND MACHINERY BUILDERS		VINTAGE DRILL PRESS MILLING MACHINE TABLE VISE 3 AXIS HAMMOND MACHINERY BUILDERS, (2) SOUTHERN GAGE AD-012 OD ZERO SPINDLE INSPECTION RUNOUT TRUE POSITION GAGE NT8, AND A SUBURBAN TOOL MASTER-GRIND SPIN INDEX FIXTURE, MODEL MG-5CV-S1 HAMMOND MACHINERY BUILDERS	🔒 Subscribe
	BROWN & SHARP	NO.1	BROWN & SHARP NO.1 UNIVERSAL GRINDING MACHINE, 220V 3PHASE BROWN & SHARP · NO.1	🔒 Subscribe
	RAMSOND	ELIRE 6500	RAMSOND ELIRE 6500 SILENT DIESEL GENERATOR MAX A.C. OUTPUT 6.5 KW RATED A.C. OUTPUT: 5.7 KW RATED A.C VOLTAGE 120/240V RAMSOND · ELIRE 6500	🔒 Subscribe
		98110 EF	ROLL-IN MODEL 98110 EF VERTICAL BAND SAW WITH ROUGHLY 18X24 INCH TABLE, COMPATIBLE FOR 10FT LONG BLADES 98110 EF	🔒 Subscribe
	DAKE	50H	50 TON DAKE 50H PRESS, HEIGHT: 85 INCHES. WIDTH BETWEEN UPRIGHTS: 32-3/4 INCHES. WIDTH BETWEEN TABLE CHANNELS: 7-1/4 INCHES. MINIMUM RAM TO TABLE: 5 INCHES. MAXIMUM RAM TO TABLE: 40 INCHES. RAM TRAVEL: 4 INCHES. HORIZONTAL WORKHEAD TRAVEL: 20-3/4 INCHES. SCREW TRAVEL: 7 INCHES. WEIGHT: APPROXIMATELY 810 LBS. S/N:178274 DAKE · 50H	🔒 Subscribe
	KENNAMETAL		KENNAMETAL BORING AND FACING HEAD KENNAMETAL	🔒 Subscribe
	MEC	4'X3'	MEC 4'X3' GRANITE TABLE GRADE A MEC · 4'X3'	🔒 Subscribe
	CHEVALIER	FCL-1840	CHEVALIER FCL-1840 LATHE PLUS. 2000 MAX RPM WITH 8IN CHUCK, 1800 MAX RPM WITH 10IN CHUCK. WITH AUTOCON DYNAPATH DELTA CNC CONTROLS CHEVALIER · FCL-1840	🔒 Subscribe
1997	ADVANTAGE	IK-2APT 20HFX	1997 ADVANTAGE IK-2APT 20HFX CHILLER, 230V 3 PHASE, 10.2 AMPS S/N: 31010 1997 · ADVANTAGE · IK-2APT 20HFX	🔒 Subscribe
	YAMAZEN	5BYK	YAMAZEN 5BYK CNC KNEE MILL WITH ALLEN BRADLEY 8400MP CONTROL, VOLTAGE: 220 S/N: 7889 YAMAZEN · 5BYK	🔒 Subscribe
			24X36X4 GRANITE SURFACE PLATE, ADJUSTABLE HEIGHT	🔒 Subscribe
			INDUSTRIAL 9 DRAWER CABINET ALL CONTENTS INCLUDED MISCELLANEOUS BOLTS	🔒 Subscribe
	LUX	828	LUX 828 RADIAL ARM DRILL. 220 V 60 CYCLES 3 PHASE LUX · 828	🔒 Subscribe
			HYDRAULIC LIFT CART AND PALLET JACK	🔒 Subscribe
			ASSORTED QUICK CHANGE TURNING HOLDERS	🔒 Subscribe
	RAMCO		RAMCO PARTS WASHER MACHINE RAMCO	🔒 Subscribe
			ASSORTED CARBIDE END MILLS	🔒 Subscribe
	GROB	NS-18	GROB NS-18 18 INCH THROAT VERTICAL BAND SAW. 240/480 VOLT THREE PHASE (CURRENTLY WIRED FOR 480). PRIMARILY A METAL CUTTING SAW, BUT IT IS VARIABLE SPEED THROUGH STEP PULLEYS. 10 BLADE SPEEDS POSSIBLE IN FPM ARE 50, 75, 115, 175, 230, 390, 595, 900, 1365 AND 2030. IT HAS A 24 INCH X 24 INCH WORKTABLE. THE TABLE CAN BE TILTED FRONT TO BACK AND SIDE TO SIDE. GROB · NS-18	🔒 Subscribe

Year	Make	Model	Description	Price
2014	LASERSTAR	5137762002	2014 LASERSTAR 7700 SERIES LASER WELDING SYSTEM WITH UNIVERSAL JIG FOR WELDING LARGE PARTS, 208-240VAC 3PH 50/60HZ 30AMPS S/N:1447133	🔒 Subscribe
1993	PORSCHE	968 CONVERTIBLE	1993 PORSCHE 968 CONVERTIBLE, 2 DOOR COUPE, MILES: 66,747	🔒 Subscribe
	TRAK	DPME2	TRAK DPME2 CNC KNEE MILL WITH PROTO TRAK EDGE3 CONTROL, 220 VOLTAGE	🔒 Subscribe
	SOUTHWESTERN INDUSTRIES	TRAK TRL 1840 CSS	SOUTHWESTERN INDUSTRIES TRAK TRL 1840 CSS LATHE, PROTO TRAX LX3 CONTROLS, SWING OVER BED 18.5 INCH, SWING OVER CARRIAGE 17 INCH, DISTANCE BETWEEN CENTERS 40.25 INCH, SPINDLE NOSE D1-6 CAMLOCK, SPINDLE BORE DIAMETER 2.36 INCH, MAIN SPINDLE SPEEDS 2500 RPM, MAIN SPINDLE DRIVE 10 HP, 220V, 36 AMP, 3 PHASE, 60 HZ S/N:021 BC11590	🔒 Subscribe
	SOUTHWESTERN	TRAK DPM	SOUTHWESTERN PROTO TRAK DPM CNC VERTICAL BED MILL WITH TRACK A.G.E. 3 CONTROL PANEL. WITH 3 PHASE INDUCTION MOTOR. 200 KA SHORT CIRCUIT INTRPT RTG AC SPINDLE MOTOR, 220 V, 3 PHASE, 60 HZ, 8.5 AMP FULL LOAD CURRENT CNC CONTROL UNIT. MODEL TRAK DPM. S/N:99-4692	🔒 Subscribe
2004	HURCO	VM2	2004 HURCO VM2 CNC VERTICAL MACHINING CENTER X AXIS: 40 INCH Y AXIS: 18 INCH Z-AXIS TRAVEL 18 INCH TABLE 46 INCH X 18 INCH SPINDLE MOTOR 20 HP SPINDLE SPEEDS 8000 RPM TOOL CAPACITY 16 ATC APPROX. DIMENSIONS 90.5 INCH X 116.1 INCH X 95.5 INCH APPROX. WEIGHT 9000 LBS	🔒 Subscribe
2007	ST SUPERTEC	STPS18M	2007 ST SUPERTEC STPS18M MANUAL SURFACE GRINDER WITH KANETSU PERMANENT MAGNETIC CHUCK. 220V, 60 CYCLE, 0 PHASE, SUPPLE VOLTAGE 12-110V.	🔒 Subscribe
	CHEVALIER	FSG-3A1224H	CHEVALIER FSG-3A1224H HYDRAULIC SURFACE GRINDER TABLE SIZE 12 INCH X 24 INCH TRAVELS X 25.6 INCH Y 14.17 INCH Z 21 RPM 1750 MAX TABLE LOAD 924 LBS WHEEL SIZE 14 X 2 X 5 BORE MAIN MOTOR HP 5 HYDRAULIC MOTOR HP 2 220 VOLT EQUIPPED WITH MAGNETIC CHUCK COOLANT UNIT APPROXIMATE OVERALL DIMENSION 80 X 72 X 80 T APPROXIMATE OVERALL WEIGHT 4630 LBS	🔒 Subscribe
	MILLER	SYNCROWAVE 250 DX	MILLER SYNCROWAVE 250 DX CC-AC/DC POWER SOURCE TIG WELDER W/ TIGRUNNER WITH BERNARD 2500SS WELDING TORCH WATER COOLER INPUT: VOLTS: 200/230/460V AMPS: 110/96/48A - 101/88/44A KW: 11.8KW - 10.2KW HERTZ: 60HZ - 50HZ PHASE: 1 S/N:LC256001	🔒 Subscribe
	SOUTHWESTERN TRAK	QCM-1	SOUTHWESTERN TRAK QCM-1 VERTICAL 3-AXIS BED MILL, WITH TRAC QMV CONTROL. 220V, 11 AMP, 3 PHASE, 60HZ S/N:993BH10029	🔒 Subscribe
	MILLPORT	PROTO TRAK PLUS	MILLPORT CNC KNEE MILL WITH PROTO TRAK PLUS CONTROL VOLTAGE: 220	🔒 Subscribe
			GRANITE SURFACE PLATE AND FRAME	🔒 Subscribe
1995	ACER	3VKH71	1995 ACER ULTIMA 3VKH CNC PROTO TRAK KNEE MILL WITH MX3 CONTROL, 115V	🔒 Subscribe
			40TAPER TOOL HOLDERS WITH TOOLS AND CART	🔒 Subscribe
	HECK INDUSTRIES	3C	HEAVY DUTY WORK TABLE WITH 8 INCH JAW WILTON BENCH VISE, 10 INCH SHEET METAL HAND SHEAR, PERMANENT MAGNETIC LIFTERS: 1000KG, AND A HECK INDUSTRIES TRACE-A-PUNCH DUPLICATING NIBBLER MODEL: 3C S/N: 11747	🔒 Subscribe
	MILLPORT	SJ-1640G	MILLPORT SJ-1640G HIGH SPEED PRECISION LATHE, MAIN MOTOR: 5 HP, 60 CYCLE, 3 PHASE, 14.5 AMPS, 220V. PUMP MOTOR: 1/8 HP, 60 CYCLE, 3 PHASE, .21 AMPS, 220V	🔒 Subscribe
	BRIDGEPORT	CENTER MILLING	BRIDGEPORT CENTER MILLING WITH BRIDGEPORT SLOTTED MILLING ATTACHMENT. 1.5 HP, 3 PHASE, 60 CYCLE, 230V, 4.4 AMP, 1730 RPM. SLOTTED MILLING ATTACHMENT: STROKE 125MM (5 INCH), 5 SPEED, STROKE SPEED ON 60HZ: 35, 54, 79, 112, 160. 3/4 HP 6 POLE MOTOR, 220V 3 PHASE.	🔒 Subscribe
			WELDING TABLE	🔒 Subscribe
			INDUSTRIAL 15 DRAWER CABINET ALL CONTENTS INCLUDED SET SCREWS EPOXY GASKET WASHERS LARGE AND SMALL NUTS 256 540 SCREWS 632 832 SCREWS 1024 1032 SCREWS 1/4-20 SCREWS 5/16-18 SCREWS 3/8-16 SCREWS 1/2-13 SCREWS 5/8-11 SCREWS MISCELLANEOUS SCREWS STRIPPER BOLTS DRYWALL SCREWS SELF DRILLING SCREWS ANCHORS NAILS ROLL PINS THREAD REPAIR EASY OUTS BEARINGS DOWEL PINS DRILL BLANKS SNAP RINGS DIE PUNCHES EYEBOLTS CHAINS	🔒 Subscribe
	SOUTH BEND		SOUTH BEND QUICK CHANGE GEAR LATHE, 10 INCH SWING, 3' BED LENGTH, 115/230V, 1HP S/N:187YN	🔒 Subscribe
	YUASA INTERNATIONAL	12	YUASA INTERNATIONAL 12 TILTING ROTARY TABLE S/N: 550-212	🔒 Subscribe
			48X36X5 GRANITE SURFACE PLATE	🔒 Subscribe
	HYPERTHERM	POWERMAX 380	HYPERTHERM POWERMAX 380 PLASMA CUTTING SYSTEM WITH HYPERYHERM INCLUDED 100LB CAPACITY WELDING CART S/N:380-008909	🔒 Subscribe
	SOUTH BEND LATHE WORKS	9A	SOUTH BEND LATHE WORKS 9 INCH MODEL A PRECISION LATHE, TOOL POST 65A	🔒 Subscribe
	SOUTH BEND	A	SOUTH BEND PRECISION LATHE MODEL A, 1HP, 208-230/460V, BED LENGTH 3.5' S/N:CL81877B	🔒 Subscribe
	KENNEDY		KENNEDY PORTABLE TOOL CABINET, 11 DRAWERS, GOOD CONDITION	🔒 Subscribe
1996	CUTTERMASTER	HDT-30	1996 CUTTERMASTER HDT-30 END MILL GRINDER, 110V S/N:366	🔒 Subscribe
	KENNEDY		KENNEDY ROLLING TOOL CABINET	🔒 Subscribe
			INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED FILES STONES SNAP PINS MACHINE PARTS BRONZE BEARINGS PIPE FITTINGS AIR FITTINGS WATER FITTINGS LOCATING RINGS PINS AND BUSHINGS DIE SPRINGS ASSORTED SPRINGS DIE HANDLES ALLEN WRENCHES DE STACO CLAMPS DIES TAPS POP RIVETS AUTOMOTIVE	🔒 Subscribe
	KENNEDY		KENNEDY 9-DRAWER CABINET	🔒 Subscribe
			INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED 60MM TOOLING 63MM TOOLING 70MM TOOLING HOSE CLAMPS CABLE AND CLAMPS WIRE NUTS BEAM CLAMPS WHOLE SAWS STAMP CLAMPS BULB FUSES SWITCHES TERMINALS WIRE TIES VALVES CLEANER	🔒 Subscribe
	KENNEDY	VERSA-CART	KENNEDY VERSA-CART WITH CONTENTS INCLUDED	🔒 Subscribe
	HAMMOND MACHINERY BUILDERS		VINTAGE DRILL PRESS MILLING MACHINE TABLE VISE 3 AXIS HAMMOND MACHINERY BUILDERS, (2) SOUTHERN GAGE AD-012 OD ZERO SPINDLE INSPECTION RUNOUT TRUE POSITION GAGE NT8, AND A SUBURBAN TOOL MASTER-GRIND SPIN INDEX FIXTURE, MODEL MG-5CV-S1	🔒 Subscribe
	BROWN & SHARP	NO.1	BROWN & SHARP NO.1 UNIVERSAL GRINDING MACHINE, 220V 3PHASE	🔒 Subscribe
	RAMSOND	ELIRE 6500	RAMSOND ELIRE 6500 SILENT DIESEL GENERATOR MAX A.C. OUTPUT 6.5 KW RATED A.C. OUTPUT: 5.7 KW RATED A.C VOLTAGE 120/240V	🔒 Subscribe
		98110 EF	ROLL-IN MODEL 98110 EF VERTICAL BAND SAW WITH ROUGHLY 18X24 INCH TABLE, COMPATIBLE FOR 10FT LONG BLADES	🔒 Subscribe
	DAKE	50H	50 TON DAKE 50H PRESS, HEIGHT: 85 INCHES. WIDTH BETWEEN UPRIGHTS: 32-3/4 INCHES. WIDTH BETWEEN TABLE CHANNELS: 7-1/4 INCHES. MINIMUM RAM TO TABLE: 5 INCHES. MAXIMUM RAM TO TABLE: 40 INCHES. RAM TRAVEL: 4 INCHES. HORIZONTAL WORKHEAD TRAVEL: 20-3/4 INCHES. SCREW TRAVEL: 7 INCHES. WEIGHT: APPROXIMATELY 810 LBS. S/N:178274	🔒 Subscribe
	KENNAMETAL		KENNAMETAL BORING AND FACING HEAD	🔒 Subscribe
	MEC	4'X3'	MEC 4'X3' GRANITE TABLE GRADE A	🔒 Subscribe
	CHEVALIER	FCL-1840	CHEVALIER FCL-1840 LATHE PLUS. 2000 MAX RPM WITH 8IN CHUCK, 1800 MAX RPM WITH 10IN CHUCK. WITH AUTOCON DYNAPATH DELTA CNC CONTROLS	🔒 Subscribe
1997	ADVANTAGE	IK-2APT 20HFX	1997 ADVANTAGE IK-2APT 20HFX CHILLER, 230V 3 PHASE, 10.2 AMPS S/N: 31010	🔒 Subscribe
	YAMAZEN	5BYK	YAMAZEN 5BYK CNC KNEE MILL WITH ALLEN BRADLEY 8400MP CONTROL, VOLTAGE: 220 S/N: 7889	🔒 Subscribe
			24X36X4 GRANITE SURFACE PLATE, ADJUSTABLE HEIGHT	🔒 Subscribe
			INDUSTRIAL 9 DRAWER CABINET ALL CONTENTS INCLUDED MISCELLANEOUS BOLTS	🔒 Subscribe
	LUX	828	LUX 828 RADIAL ARM DRILL. 220 V 60 CYCLES 3 PHASE	🔒 Subscribe
			HYDRAULIC LIFT CART AND PALLET JACK	🔒 Subscribe
			ASSORTED QUICK CHANGE TURNING HOLDERS	🔒 Subscribe
	RAMCO		RAMCO PARTS WASHER MACHINE	🔒 Subscribe
			ASSORTED CARBIDE END MILLS	🔒 Subscribe
	GROB	NS-18	GROB NS-18 18 INCH THROAT VERTICAL BAND SAW. 240/480 VOLT THREE PHASE (CURRENTLY WIRED FOR 480). PRIMARILY A METAL CUTTING SAW, BUT IT IS VARIABLE SPEED THROUGH STEP PULLEYS. 10 BLADE SPEEDS POSSIBLE IN FPM ARE 50, 75, 115, 175, 230, 390, 595, 900, 1365 AND 2030. IT HAS A 24 INCH X 24 INCH WORKTABLE. THE TABLE CAN BE TILTED FRONT TO BACK AND SIDE TO SIDE.	🔒 Subscribe

2014 LASERSTAR 5137762002

WELDING & CUTTING

2014 LASERSTAR 7700 SERIES LASER WELDING SYSTEM WITH UNIVERSAL JIG FOR WELDING LARGE PARTS, 208-240V...

Hammer Price: 🔒

1993 PORSCHE 968 CONVERTIBLE

TRUCKS, TRAILERS & VEHICLES

1993 PORSCHE 968 CONVERTIBLE, 2 DOOR COUPE, MILES: 66,747...

Hammer Price: 🔒

TRAK DPME2

CNC MACHINE CENTERS

TRAK DPME2 CNC KNEE MILL WITH PROTO TRAK EDGE3 CONTROL, 220 VOLTAGE...

Hammer Price: 🔒

SOUTHWESTERN INDUSTRIES TRAK TRL 1840 CSS

METALWORKING & FABRICATION EQUIPMENT

SOUTHWESTERN INDUSTRIES TRAK TRL 1840 CSS LATHE, PROTO TRAX LX3 CONTROLS, SWING OVER BED 18.5 INCH, ...

Hammer Price: 🔒

SOUTHWESTERN TRAK DPM

CNC MACHINE CENTERS

SOUTHWESTERN PROTO TRAK DPM CNC VERTICAL BED MILL WITH TRACK A.G.E. 3 CONTROL PANEL. WITH 3 PHASE IN...

Hammer Price: 🔒

2004 HURCO VM2

CNC MACHINE CENTERS

2004 HURCO VM2 CNC VERTICAL MACHINING CENTER X AXIS: 40 INCH Y AXIS: 18 INCH Z-AXIS TRAVEL 18 INCH T...

Hammer Price: 🔒

2007 ST SUPERTEC STPS18M

METALWORKING & FABRICATION EQUIPMENT

2007 ST SUPERTEC STPS18M MANUAL SURFACE GRINDER WITH KANETSU PERMANENT MAGNETIC CHUCK. 220V, 60 CYCL...

Hammer Price: 🔒

CHEVALIER FSG-3A1224H

METALWORKING & FABRICATION EQUIPMENT

CHEVALIER FSG-3A1224H HYDRAULIC SURFACE GRINDER TABLE SIZE 12 INCH X 24 INCH TRAVELS X 25.6 INCH Y 1...

Hammer Price: 🔒

MILLER SYNCROWAVE 250 DX

WELDING & CUTTING

MILLER SYNCROWAVE 250 DX CC-AC/DC POWER SOURCE TIG WELDER W/ TIGRUNNER WITH BERNARD 2500SS WELDING T...

Hammer Price: 🔒

SOUTHWESTERN TRAK QCM-1

METALWORKING & FABRICATION EQUIPMENT

SOUTHWESTERN TRAK QCM-1 VERTICAL 3-AXIS BED MILL, WITH TRAC QMV CONTROL. 220V, 11 AMP, 3 PHASE, 60HZ...

Hammer Price: 🔒

MILLPORT PROTO TRAK PLUS

CNC MACHINE CENTERS

MILLPORT CNC KNEE MILL WITH PROTO TRAK PLUS CONTROL VOLTAGE: 220...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

GRANITE SURFACE PLATE AND FRAME...

Hammer Price: 🔒

1995 ACER 3VKH71

CNC MACHINE CENTERS

1995 ACER ULTIMA 3VKH CNC PROTO TRAK KNEE MILL WITH MX3 CONTROL, 115V...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

40TAPER TOOL HOLDERS WITH TOOLS AND CART...

Hammer Price: 🔒

HECK INDUSTRIES 3C

METALWORKING & FABRICATION EQUIPMENT

HEAVY DUTY WORK TABLE WITH 8 INCH JAW WILTON BENCH VISE, 10 INCH SHEET METAL HAND SHEAR, PERMANENT M...

Hammer Price: 🔒

MILLPORT SJ-1640G

METALWORKING & FABRICATION EQUIPMENT

MILLPORT SJ-1640G HIGH SPEED PRECISION LATHE, MAIN MOTOR: 5 HP, 60 CYCLE, 3 PHASE, 14.5 AMPS, 220V. ...

Hammer Price: 🔒

BRIDGEPORT CENTER MILLING

METALWORKING & FABRICATION EQUIPMENT

BRIDGEPORT CENTER MILLING WITH BRIDGEPORT SLOTTED MILLING ATTACHMENT. 1.5 HP, 3 PHASE, 60 CYCLE, 230...

Hammer Price: 🔒

WELDING & CUTTING

WELDING TABLE...

Hammer Price: 🔒

MISC

INDUSTRIAL 15 DRAWER CABINET ALL CONTENTS INCLUDED SET SCREWS EPOXY GASKET WASHERS LARGE AND SMALL N...

Hammer Price: 🔒

SOUTH BEND

METALWORKING & FABRICATION EQUIPMENT

SOUTH BEND QUICK CHANGE GEAR LATHE, 10 INCH SWING, 3' BED LENGTH, 115/230V, 1HP S/N:187YN...

Hammer Price: 🔒

YUASA INTERNATIONAL 12

METALWORKING & FABRICATION EQUIPMENT

YUASA INTERNATIONAL 12 TILTING ROTARY TABLE S/N: 550-212...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

48X36X5 GRANITE SURFACE PLATE...

Hammer Price: 🔒

HYPERTHERM POWERMAX 380

WELDING & CUTTING

HYPERTHERM POWERMAX 380 PLASMA CUTTING SYSTEM WITH HYPERYHERM INCLUDED 100LB CAPACITY WELDING CART S...

Hammer Price: 🔒

SOUTH BEND LATHE WORKS 9A

METALWORKING & FABRICATION EQUIPMENT

SOUTH BEND LATHE WORKS 9 INCH MODEL A PRECISION LATHE, TOOL POST 65A...

Hammer Price: 🔒

SOUTH BEND A

METALWORKING & FABRICATION EQUIPMENT

SOUTH BEND PRECISION LATHE MODEL A, 1HP, 208-230/460V, BED LENGTH 3.5' S/N:CL81877B...

Hammer Price: 🔒

KENNEDY

MISC

KENNEDY PORTABLE TOOL CABINET, 11 DRAWERS, GOOD CONDITION...

Hammer Price: 🔒

1996 CUTTERMASTER HDT-30

METALWORKING & FABRICATION EQUIPMENT

1996 CUTTERMASTER HDT-30 END MILL GRINDER, 110V S/N:366...

Hammer Price: 🔒

KENNEDY

MISC

KENNEDY ROLLING TOOL CABINET...

Hammer Price: 🔒

MISC

INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED FILES STONES SNAP PINS MACHINE PARTS BRONZE BEARI...

Hammer Price: 🔒

KENNEDY

MISC

KENNEDY 9-DRAWER CABINET...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INDUSTRIAL 11 DRAWER CABINET ALL CONTENTS INCLUDED 60MM TOOLING 63MM TOOLING 70MM TOOLING HOSE CLAMP...

Hammer Price: 🔒

KENNEDY VERSA-CART

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KENNEDY VERSA-CART WITH CONTENTS INCLUDED...

Hammer Price: 🔒

HAMMOND MACHINERY BUILDERS

METALWORKING & FABRICATION EQUIPMENT

VINTAGE DRILL PRESS MILLING MACHINE TABLE VISE 3 AXIS HAMMOND MACHINERY BUILDERS, (2) SOUTHERN GAGE ...

Hammer Price: 🔒

BROWN & SHARP NO.1

METALWORKING & FABRICATION EQUIPMENT

BROWN & SHARP NO.1 UNIVERSAL GRINDING MACHINE, 220V 3PHASE...

Hammer Price: 🔒

RAMSOND ELIRE 6500

ELECTRICAL AND POWER GENERATION EQUIPMENT

RAMSOND ELIRE 6500 SILENT DIESEL GENERATOR MAX A.C. OUTPUT 6.5 KW RATED A.C. OUTPUT: 5.7 KW RATED A....

Hammer Price: 🔒

98110 EF

WOODWORKING EQUIPMENT

ROLL-IN MODEL 98110 EF VERTICAL BAND SAW WITH ROUGHLY 18X24 INCH TABLE, COMPATIBLE FOR 10FT LONG BLA...

Hammer Price: 🔒

DAKE 50H

PRESSES & FORMING

50 TON DAKE 50H PRESS, HEIGHT: 85 INCHES. WIDTH BETWEEN UPRIGHTS: 32-3/4 INCHES. WIDTH BETWEEN TABLE...

Hammer Price: 🔒

KENNAMETAL

METALWORKING & FABRICATION EQUIPMENT

KENNAMETAL BORING AND FACING HEAD...

Hammer Price: 🔒

MEC 4'X3'

METALWORKING & FABRICATION EQUIPMENT

MEC 4'X3' GRANITE TABLE GRADE A...

Hammer Price: 🔒

CHEVALIER FCL-1840

METALWORKING & FABRICATION EQUIPMENT

CHEVALIER FCL-1840 LATHE PLUS. 2000 MAX RPM WITH 8IN CHUCK, 1800 MAX RPM WITH 10IN CHUCK. WITH AUTOC...

Hammer Price: 🔒

1997 ADVANTAGE IK-2APT 20HFX

INDUSTRIAL AND COOLING HEATING EQUIPMENT

1997 ADVANTAGE IK-2APT 20HFX CHILLER, 230V 3 PHASE, 10.2 AMPS S/N: 31010...

Hammer Price: 🔒

YAMAZEN 5BYK

CNC MACHINE CENTERS

YAMAZEN 5BYK CNC KNEE MILL WITH ALLEN BRADLEY 8400MP CONTROL, VOLTAGE: 220 S/N: 7889...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

24X36X4 GRANITE SURFACE PLATE, ADJUSTABLE HEIGHT...

Hammer Price: 🔒

MISC

INDUSTRIAL 9 DRAWER CABINET ALL CONTENTS INCLUDED MISCELLANEOUS BOLTS...

Hammer Price: 🔒

LUX 828

CNC MACHINE CENTERS

LUX 828 RADIAL ARM DRILL. 220 V 60 CYCLES 3 PHASE...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HYDRAULIC LIFT CART AND PALLET JACK...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

ASSORTED QUICK CHANGE TURNING HOLDERS...

Hammer Price: 🔒

RAMCO

AUTOMOTIVE REPAIR

RAMCO PARTS WASHER MACHINE...

Hammer Price: 🔒

POWER AND HAND TOOLS

ASSORTED CARBIDE END MILLS...

Hammer Price: 🔒

GROB NS-18

WOODWORKING EQUIPMENT

GROB NS-18 18 INCH THROAT VERTICAL BAND SAW. 240/480 VOLT THREE PHASE (CURRENTLY WIRED FOR 480). PRI...

Hammer Price: 🔒

1 2 3 4 5 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Kenco Mold Company

Save to Project Folder

Print Options

Save to Project Folder