Infra Corporation A Sheet Metal Fabrication Facility

Westbrook Asset Management

Category: MATERIAL HANDLING & WAREHOUSE EQUIPMENT

Total Lots: 455

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 455 lots

Year	Make	Model	Lot Description	Hammer Price
2006	CATERPILLAR	C5000	2006 CATERPILLAR C5000 5,000-LBS. X 188" LIFT CAPACITY LP GAS FORK LIFT TRUCK S/N: AT9005851, SIDE SHIFT, 3-STAGE MAST, 48" FORKS, HEADLIGHTS, (LP TANK NOT INCLUDED) 2006 · CATERPILLAR · C5000	🔒 Subscribe
	WYSONG	772	WYSONG 772 72" X 3/16" CAPACITY POWER SQUARING SHEAR, 24" FRONT OPERATED POWERED BACKGAUGE WITH READOUT, AIR ACTUATED CLUTCH, PORTABLE FOOT PEDAL, ONE SHOT LUBE, 60" SQUARING ARM, (2) 36" FRONT SUPPORT ARMS S/N: P102-116 WYSONG · 772	🔒 Subscribe
	CHICAGO DREIS & KRUMP	8L14 SPEC	CHICAGO DREIS & KRUMP 8L14 SPEC POWER PRESS BRAKE, 60/90 TON CAPACITY, 102" BETWEEN HOUSINGS, REEVES VARI-SPEED DRIVE, POWERED RAM ADJUSTMENT, REAR OPERATED MANUAL BACKGAUGE S/N: L-8449 CHICAGO DREIS & KRUMP · 8L14 SPEC	🔒 Subscribe
	BANTAM	B212	BANTAM B212 12-TON CAPACITY X 24" FOOT OPERATED AIR POWERED PRESS BRAKE S/N: A-8399 BANTAM · B212	🔒 Subscribe
	MINSTER	NO. 5	MINSTER NO. 5 45-TON CAPACITY OPEN BACK INCLINABLE PRESS, 90-STROKES PER MINUTE, 2.75" SLIDE ADJUSTMENT, 3" STROKE, 15.75" SHUT HEIGHT, AIR CLUTCH, 28" X 18" BOLSTER PLATE, FOOT PEDAL OPERATION, 2-PALM BUTTONS CONTROLLER S/N: 5-19608 MINSTER · NO. 5	🔒 Subscribe
	TELEDYNE PEER	AR-450	TELEDYNE PEER AR-450 50-KVA X 24" DEEP THROAT SPOT WELDER S/N: 810209 TELEDYNE PEER · AR-450	🔒 Subscribe
	LINCOLN	POWER MIG 255	LINCOLN POWER MIG 255 300-AMP CAPACITY MIG WELDER S/N: N/A, WITH ARGON TANK AND LEADS, PORTABLE LINCOLN · POWER MIG 255	🔒 Subscribe
	MILLER	MAXSTAR 200 DX	MILLER MAXSTAR 200 DX PORTABLE TIG WELDER, WITH LEADS AND CART S/N: LC267110 MILLER · MAXSTAR 200 DX	🔒 Subscribe
	DI-ACRO	1A	DI-ACRO 1A BENDER MOUNTED TO STAND, BOX OF TOOLING INCLUDED DI-ACRO · 1A	🔒 Subscribe
			VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF	🔒 Subscribe
	VERSON	96" X 45-TON CAPACITY POWER PRESS BRAKE	VERSON 96" X 45-TON CAPACITY POWER PRESS BRAKE, 7 1/2" SHUT HEIGHT, 2 1/2" STROKE, 3" RAM ADJUSTMENT, 78" BETWEEN HOUSINGS S/N: 11888-2078 VERSON · 96" X 45-TON CAPACITY POWER PRESS BRAKE	🔒 Subscribe
	TAI-PIIN INDUSTRIAL	30" ARM X 8" COLUMN RADIAL DRILL	TAI-PIIN INDUSTRIAL 30" ARM X 8" COLUMN RADIAL DRILL JACOBS NO. 18N DRILL CHUCK, 15 1/2" X 19 1/2" X 15"H BOX TABLE, S/N: 1988 TAI-PIIN INDUSTRIAL · 30" ARM X 8" COLUMN RADIAL DRILL	🔒 Subscribe
			STAINLESS STEEL, AND STEEL CUTOFFS AND SCRAP IN (5) CONTAINERS	🔒 Subscribe
			VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF	🔒 Subscribe
	ARCAN	CP-401	ARCAN CP-401 40-TON AIR/OVER DOWN ACTING H-FRAME SHOP PRESS, 32" WIDE OPEN, ADJUSTABLE BED HEIGHT, DIAL GAUGE S/N: N/A ARCAN · CP-401	🔒 Subscribe
			SHELVING UNIT	🔒 Subscribe
	ROCKWELL	25-210	ROCKWELL 25-210 15" X 42" GEARED HEAD ENGINE LATHE S/N: 1401687, 9" 3-JAW CHUCK, 2-POSITION TOOL POST, STEADY REST, TAIL STOCK AND TOOLING (HIGH SPEED NOT CURRENTLY FUNCTIONING) ROCKWELL · 25-210	🔒 Subscribe
	MILWAUKEE	4252-1	MAGNETIC BASE DRILL PRESS, 3/4" DRILL CHUCK S/N: 502 33240 MILWAUKEE · 4252-1	🔒 Subscribe
			VARIOUS PUNCHES & BRAKE DIES ON (1) SHELF	🔒 Subscribe
	JOHNSON	NO. 27 - FW - P.C.	JOHNSON NO. 27 - FW - P.C. 27-TON CAPACITY OPEN BACK INCLINABLE PRESS S/N: 64203, 3 1/2" STROKE, 120-STROKES PER MINUTE, 11 7/8" SHUT HEIGHT, 2 1/2" SLIDE ADJUSTMENT, 21 1/2" X 13" BOLSTER PLATE, FOOT PEDAL OPERATION, 2-PALM BUTTON CONTROLLER JOHNSON · NO. 27 - FW - P.C.	🔒 Subscribe
	GREENLEE	1731	GREENLEE 1731 HYDRAULIC PUNCH SYSTEM, HYDRAULIC UNIT, TOOLING AND CART S/N: N/A GREENLEE · 1731	🔒 Subscribe
			VARIOUS SPOOLS OF WIRE ON (6) SHELVES	🔒 Subscribe
	LENCO	C-3000	LENCO C-3000 PORTABLE SPOT WELDER, S/N: A23407, WITH LEADS LENCO · C-3000	🔒 Subscribe
			OXYGEN/ACETYLENE CART WITH TORCH, HOSES, GAUGES, AND TANKS	🔒 Subscribe
			VARIOUS ELECTRONICS IN (1) BOX ON FLOOR	🔒 Subscribe
	POWERMATIC	1150A	POWERMATIC 1150A 15" FLOOR STANDING VARIABLE SPEED DRILL PRESS, 10" X 14" WORK SURFACE, 1-PH S/N: 7815V499 POWERMATIC · 1150A	🔒 Subscribe
	PIERCE-ALL	PERF-O-MATOR	PIERCE-ALL PERF-O-MATOR PUNCHING MACHINE W/ TOOLING CABINETS FULL OF PIERCE-ALL TOOLING, DUPLICATOR - PIERCE-ALL PERF-O-MATOR PUNCHING MACHINE COMPLETE WITH (2) 6-DRAWER TOOLING CABINETS FULL OF PIERCE-ALL TOOLING, DUPLICATOR PIERCE-ALL · PERF-O-MATOR	🔒 Subscribe
	HECK	TYPE 3C TRACE-A-PUNCH	HECK TYPE 3C TRACE-A-PUNCH NIBBLER, WITH STAND AND WORK LIGHT S/N: 12828 HECK · TYPE 3C TRACE-A-PUNCH	🔒 Subscribe
	HERCULES	BI 644R21-2	HERCULES BI 644R21-2 2-TON X 10' REACH FORK LIFT BOOM ATTACHMENT S/N: BI 557 HERCULES · BI 644R21-2	🔒 Subscribe
			96" LONG BRAKE DIE	🔒 Subscribe
	XENTREX		XENTREX POWER SUPPLY XENTREX	🔒 Subscribe
			75 BRAKE DIE	🔒 Subscribe
	PEXTO	36" INITIAL PINCH MANUAL BENDING ROLL	PEXTO 36" INITIAL PINCH MANUAL BENDING ROLL, 2 1/2" TOP ROLL, 2" LOWER ROLLS, WIRE GROOVES PEXTO · 36" INITIAL PINCH MANUAL BENDING ROLL	🔒 Subscribe
	GREENERD	NO. 4	GREENERD NO. 4 FLOOR STANDING MANDREL PRESS S/N: N/A GREENERD · NO. 4	🔒 Subscribe
			STAINLESS STEEL SHEET STOCK ON (1) PALLET ON (1) SHELF	🔒 Subscribe
	BROWN & SHARPE	6" X 18" HAND FEED SURFACE GRINDER	BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER, BROWN & SHARPE 6" X 18" PERMANENT MAGNET - BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER, S/N N/A, BROWN & SHARPE 6" X 18" PERMANENT MAGNET BROWN & SHARPE · 6" X 18" HAND FEED SURFACE GRINDER	🔒 Subscribe
	SCOTCHMAN BEWO	350-14	SCOTCHMAN BEWO 350-14 14" COLD SAW, CABINET BASED S/N: 38064671 SCOTCHMAN BEWO · 350-14	🔒 Subscribe
			STEEL SQUARE HOLLOW TUBE, ANGLE IRON, C-CHANNEL, UNISTRUT, FLAT BAR, HOLLOW ROUND, ETC. STOCK ON FLOOR UNDER (2) RACKS	🔒 Subscribe
	KINGSLEY		KINGSLEY WIRE MARKING TYPE MACHINE WITH TOOLING KINGSLEY	🔒 Subscribe
			VARIOUS I/O ELECTRONICS IN (1) BOX	🔒 Subscribe
	BALDOR	410B	BALDOR 410B 8" X 1 1/2-HP DOUBLE END PEDESTAL TYPE BUFFER, 1-PH S/N: P1/00 BALDOR · 410B	🔒 Subscribe
		LONG BRAKE PUNCH	LONG BRAKE PUNCH LONG BRAKE PUNCH	🔒 Subscribe
			BRAKE PUNCHES & DIES	🔒 Subscribe
		DEEP THROAT SPOT WELDER	DEEP THROAT SPOT WELDER S/N: N/A DEEP THROAT SPOT WELDER	🔒 Subscribe
			CUTOFF STEEL SHEET STOCK ON (4) PALLET ON (1) SHELF	🔒 Subscribe
			MIXED ALLOY CUTOFF SHEET STOCK IN (1) STACK	🔒 Subscribe
			VARIOUS ALLOYS STOCK CUTOFFS ON (2) SHELVES	🔒 Subscribe
	GEO T. SCHMIDT		GEO T. SCHMIDT MARKING MACHINE GEO T. SCHMIDT	🔒 Subscribe
	WELLS	8M	WELLS MODEL 8M 8" X 16" CAPACITY HORIZONTAL METAL CUTTING BAND SAW S/N: 16769, PORTABLE WELLS · 8M	🔒 Subscribe
	THERMAL DYNAMICS	DYNAPAK 110	THERMAL DYNAMICS DYNAPAK 110 AIR PLASMA CUTTING SYSTEM, PORTABLE, WITH LEADS THERMAL DYNAMICS · DYNAPAK 110	🔒 Subscribe

Year	Make	Model	Description	Price
2006	CATERPILLAR	C5000	2006 CATERPILLAR C5000 5,000-LBS. X 188" LIFT CAPACITY LP GAS FORK LIFT TRUCK S/N: AT9005851, SIDE SHIFT, 3-STAGE MAST, 48" FORKS, HEADLIGHTS, (LP TANK NOT INCLUDED)	🔒 Subscribe
	WYSONG	772	WYSONG 772 72" X 3/16" CAPACITY POWER SQUARING SHEAR, 24" FRONT OPERATED POWERED BACKGAUGE WITH READOUT, AIR ACTUATED CLUTCH, PORTABLE FOOT PEDAL, ONE SHOT LUBE, 60" SQUARING ARM, (2) 36" FRONT SUPPORT ARMS S/N: P102-116	🔒 Subscribe
	CHICAGO DREIS & KRUMP	8L14 SPEC	CHICAGO DREIS & KRUMP 8L14 SPEC POWER PRESS BRAKE, 60/90 TON CAPACITY, 102" BETWEEN HOUSINGS, REEVES VARI-SPEED DRIVE, POWERED RAM ADJUSTMENT, REAR OPERATED MANUAL BACKGAUGE S/N: L-8449	🔒 Subscribe
	BANTAM	B212	BANTAM B212 12-TON CAPACITY X 24" FOOT OPERATED AIR POWERED PRESS BRAKE S/N: A-8399	🔒 Subscribe
	MINSTER	NO. 5	MINSTER NO. 5 45-TON CAPACITY OPEN BACK INCLINABLE PRESS, 90-STROKES PER MINUTE, 2.75" SLIDE ADJUSTMENT, 3" STROKE, 15.75" SHUT HEIGHT, AIR CLUTCH, 28" X 18" BOLSTER PLATE, FOOT PEDAL OPERATION, 2-PALM BUTTONS CONTROLLER S/N: 5-19608	🔒 Subscribe
	TELEDYNE PEER	AR-450	TELEDYNE PEER AR-450 50-KVA X 24" DEEP THROAT SPOT WELDER S/N: 810209	🔒 Subscribe
	LINCOLN	POWER MIG 255	LINCOLN POWER MIG 255 300-AMP CAPACITY MIG WELDER S/N: N/A, WITH ARGON TANK AND LEADS, PORTABLE	🔒 Subscribe
	MILLER	MAXSTAR 200 DX	MILLER MAXSTAR 200 DX PORTABLE TIG WELDER, WITH LEADS AND CART S/N: LC267110	🔒 Subscribe
	DI-ACRO	1A	DI-ACRO 1A BENDER MOUNTED TO STAND, BOX OF TOOLING INCLUDED	🔒 Subscribe
			VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF	🔒 Subscribe
	VERSON	96" X 45-TON CAPACITY POWER PRESS BRAKE	VERSON 96" X 45-TON CAPACITY POWER PRESS BRAKE, 7 1/2" SHUT HEIGHT, 2 1/2" STROKE, 3" RAM ADJUSTMENT, 78" BETWEEN HOUSINGS S/N: 11888-2078	🔒 Subscribe
	TAI-PIIN INDUSTRIAL	30" ARM X 8" COLUMN RADIAL DRILL	TAI-PIIN INDUSTRIAL 30" ARM X 8" COLUMN RADIAL DRILL JACOBS NO. 18N DRILL CHUCK, 15 1/2" X 19 1/2" X 15"H BOX TABLE, S/N: 1988	🔒 Subscribe
			STAINLESS STEEL, AND STEEL CUTOFFS AND SCRAP IN (5) CONTAINERS	🔒 Subscribe
			VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF	🔒 Subscribe
	ARCAN	CP-401	ARCAN CP-401 40-TON AIR/OVER DOWN ACTING H-FRAME SHOP PRESS, 32" WIDE OPEN, ADJUSTABLE BED HEIGHT, DIAL GAUGE S/N: N/A	🔒 Subscribe
			SHELVING UNIT	🔒 Subscribe
	ROCKWELL	25-210	ROCKWELL 25-210 15" X 42" GEARED HEAD ENGINE LATHE S/N: 1401687, 9" 3-JAW CHUCK, 2-POSITION TOOL POST, STEADY REST, TAIL STOCK AND TOOLING (HIGH SPEED NOT CURRENTLY FUNCTIONING)	🔒 Subscribe
	MILWAUKEE	4252-1	MAGNETIC BASE DRILL PRESS, 3/4" DRILL CHUCK S/N: 502 33240	🔒 Subscribe
			VARIOUS PUNCHES & BRAKE DIES ON (1) SHELF	🔒 Subscribe
	JOHNSON	NO. 27 - FW - P.C.	JOHNSON NO. 27 - FW - P.C. 27-TON CAPACITY OPEN BACK INCLINABLE PRESS S/N: 64203, 3 1/2" STROKE, 120-STROKES PER MINUTE, 11 7/8" SHUT HEIGHT, 2 1/2" SLIDE ADJUSTMENT, 21 1/2" X 13" BOLSTER PLATE, FOOT PEDAL OPERATION, 2-PALM BUTTON CONTROLLER	🔒 Subscribe
	GREENLEE	1731	GREENLEE 1731 HYDRAULIC PUNCH SYSTEM, HYDRAULIC UNIT, TOOLING AND CART S/N: N/A	🔒 Subscribe
			VARIOUS SPOOLS OF WIRE ON (6) SHELVES	🔒 Subscribe
	LENCO	C-3000	LENCO C-3000 PORTABLE SPOT WELDER, S/N: A23407, WITH LEADS	🔒 Subscribe
			OXYGEN/ACETYLENE CART WITH TORCH, HOSES, GAUGES, AND TANKS	🔒 Subscribe
			VARIOUS ELECTRONICS IN (1) BOX ON FLOOR	🔒 Subscribe
	POWERMATIC	1150A	POWERMATIC 1150A 15" FLOOR STANDING VARIABLE SPEED DRILL PRESS, 10" X 14" WORK SURFACE, 1-PH S/N: 7815V499	🔒 Subscribe
	PIERCE-ALL	PERF-O-MATOR	PIERCE-ALL PERF-O-MATOR PUNCHING MACHINE W/ TOOLING CABINETS FULL OF PIERCE-ALL TOOLING, DUPLICATOR - PIERCE-ALL PERF-O-MATOR PUNCHING MACHINE COMPLETE WITH (2) 6-DRAWER TOOLING CABINETS FULL OF PIERCE-ALL TOOLING, DUPLICATOR	🔒 Subscribe
	HECK	TYPE 3C TRACE-A-PUNCH	HECK TYPE 3C TRACE-A-PUNCH NIBBLER, WITH STAND AND WORK LIGHT S/N: 12828	🔒 Subscribe
	HERCULES	BI 644R21-2	HERCULES BI 644R21-2 2-TON X 10' REACH FORK LIFT BOOM ATTACHMENT S/N: BI 557	🔒 Subscribe
			96" LONG BRAKE DIE	🔒 Subscribe
	XENTREX		XENTREX POWER SUPPLY	🔒 Subscribe
			75 BRAKE DIE	🔒 Subscribe
	PEXTO	36" INITIAL PINCH MANUAL BENDING ROLL	PEXTO 36" INITIAL PINCH MANUAL BENDING ROLL, 2 1/2" TOP ROLL, 2" LOWER ROLLS, WIRE GROOVES	🔒 Subscribe
	GREENERD	NO. 4	GREENERD NO. 4 FLOOR STANDING MANDREL PRESS S/N: N/A	🔒 Subscribe
			STAINLESS STEEL SHEET STOCK ON (1) PALLET ON (1) SHELF	🔒 Subscribe
	BROWN & SHARPE	6" X 18" HAND FEED SURFACE GRINDER	BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER, BROWN & SHARPE 6" X 18" PERMANENT MAGNET - BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER, S/N N/A, BROWN & SHARPE 6" X 18" PERMANENT MAGNET	🔒 Subscribe
	SCOTCHMAN BEWO	350-14	SCOTCHMAN BEWO 350-14 14" COLD SAW, CABINET BASED S/N: 38064671	🔒 Subscribe
			STEEL SQUARE HOLLOW TUBE, ANGLE IRON, C-CHANNEL, UNISTRUT, FLAT BAR, HOLLOW ROUND, ETC. STOCK ON FLOOR UNDER (2) RACKS	🔒 Subscribe
	KINGSLEY		KINGSLEY WIRE MARKING TYPE MACHINE WITH TOOLING	🔒 Subscribe
			VARIOUS I/O ELECTRONICS IN (1) BOX	🔒 Subscribe
	BALDOR	410B	BALDOR 410B 8" X 1 1/2-HP DOUBLE END PEDESTAL TYPE BUFFER, 1-PH S/N: P1/00	🔒 Subscribe
		LONG BRAKE PUNCH	LONG BRAKE PUNCH	🔒 Subscribe
			BRAKE PUNCHES & DIES	🔒 Subscribe
		DEEP THROAT SPOT WELDER	DEEP THROAT SPOT WELDER S/N: N/A	🔒 Subscribe
			CUTOFF STEEL SHEET STOCK ON (4) PALLET ON (1) SHELF	🔒 Subscribe
			MIXED ALLOY CUTOFF SHEET STOCK IN (1) STACK	🔒 Subscribe
			VARIOUS ALLOYS STOCK CUTOFFS ON (2) SHELVES	🔒 Subscribe
	GEO T. SCHMIDT		GEO T. SCHMIDT MARKING MACHINE	🔒 Subscribe
	WELLS	8M	WELLS MODEL 8M 8" X 16" CAPACITY HORIZONTAL METAL CUTTING BAND SAW S/N: 16769, PORTABLE	🔒 Subscribe
	THERMAL DYNAMICS	DYNAPAK 110	THERMAL DYNAMICS DYNAPAK 110 AIR PLASMA CUTTING SYSTEM, PORTABLE, WITH LEADS	🔒 Subscribe

2006 CATERPILLAR C5000

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2006 CATERPILLAR C5000 5,000-LBS. X 188" LIFT CAPACITY LP GAS FORK LIFT TRUCK S/N: AT9005851, SIDE S...

Hammer Price: 🔒

WYSONG 772

METALWORKING & FABRICATION EQUIPMENT

WYSONG 772 72" X 3/16" CAPACITY POWER SQUARING SHEAR, 24" FRONT OPERATED POWERED BACKGAUGE WITH READ...

Hammer Price: 🔒

CHICAGO DREIS & KRUMP 8L14 SPEC

PRESSES & FORMING

CHICAGO DREIS & KRUMP 8L14 SPEC POWER PRESS BRAKE, 60/90 TON CAPACITY, 102" BETWEEN HOUSINGS, REEVES...

Hammer Price: 🔒

BANTAM B212

PRESSES & FORMING

BANTAM B212 12-TON CAPACITY X 24" FOOT OPERATED AIR POWERED PRESS BRAKE S/N: A-8399...

Hammer Price: 🔒

MINSTER NO. 5

PRESSES & FORMING

MINSTER NO. 5 45-TON CAPACITY OPEN BACK INCLINABLE PRESS, 90-STROKES PER MINUTE, 2.75" SLIDE ADJUSTM...

Hammer Price: 🔒

TELEDYNE PEER AR-450

WELDING & CUTTING

TELEDYNE PEER AR-450 50-KVA X 24" DEEP THROAT SPOT WELDER S/N: 810209...

Hammer Price: 🔒

LINCOLN POWER MIG 255

WELDING & CUTTING

LINCOLN POWER MIG 255 300-AMP CAPACITY MIG WELDER S/N: N/A, WITH ARGON TANK AND LEADS, PORTABLE...

Hammer Price: 🔒

MILLER MAXSTAR 200 DX

WELDING & CUTTING

MILLER MAXSTAR 200 DX PORTABLE TIG WELDER, WITH LEADS AND CART S/N: LC267110...

Hammer Price: 🔒

DI-ACRO 1A

METALWORKING & FABRICATION EQUIPMENT

DI-ACRO 1A BENDER MOUNTED TO STAND, BOX OF TOOLING INCLUDED...

Hammer Price: 🔒

MISC

VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF...

Hammer Price: 🔒

VERSON 96" X 45-TON CAPACITY POWER PRESS BRAKE

PRESSES & FORMING

VERSON 96" X 45-TON CAPACITY POWER PRESS BRAKE, 7 1/2" SHUT HEIGHT, 2 1/2" STROKE, 3" RAM ADJUSTMENT...

Hammer Price: 🔒

TAI-PIIN INDUSTRIAL 30" ARM X 8" COLUMN RADIAL DRILL

METALWORKING & FABRICATION EQUIPMENT

TAI-PIIN INDUSTRIAL 30" ARM X 8" COLUMN RADIAL DRILL JACOBS NO. 18N DRILL CHUCK, 15 1/2" X 19 1/2" ...

Hammer Price: 🔒

MISC

STAINLESS STEEL, AND STEEL CUTOFFS AND SCRAP IN (5) CONTAINERS...

Hammer Price: 🔒

MISC

VARIOUS SMALL BRAKE PUNCHES & DIES ON (1) SHELF...

Hammer Price: 🔒

ARCAN CP-401

PRESSES & FORMING

ARCAN CP-401 40-TON AIR/OVER DOWN ACTING H-FRAME SHOP PRESS, 32" WIDE OPEN, ADJUSTABLE BED HEIGHT, D...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SHELVING UNIT...

Hammer Price: 🔒

ROCKWELL 25-210

METALWORKING & FABRICATION EQUIPMENT

ROCKWELL 25-210 15" X 42" GEARED HEAD ENGINE LATHE S/N: 1401687, 9" 3-JAW CHUCK, 2-POSITION TOOL POS...

Hammer Price: 🔒

MILWAUKEE 4252-1

POWER AND HAND TOOLS

MAGNETIC BASE DRILL PRESS, 3/4" DRILL CHUCK S/N: 502 33240...

Hammer Price: 🔒

MISC

VARIOUS PUNCHES & BRAKE DIES ON (1) SHELF...

Hammer Price: 🔒

JOHNSON NO. 27 - FW - P.C.

PRESSES & FORMING

JOHNSON NO. 27 - FW - P.C. 27-TON CAPACITY OPEN BACK INCLINABLE PRESS S/N: 64203, 3 1/2" STROKE, 120...

Hammer Price: 🔒

GREENLEE 1731

METALWORKING & FABRICATION EQUIPMENT

GREENLEE 1731 HYDRAULIC PUNCH SYSTEM, HYDRAULIC UNIT, TOOLING AND CART S/N: N/A...

Hammer Price: 🔒

MISC

VARIOUS SPOOLS OF WIRE ON (6) SHELVES...

Hammer Price: 🔒

LENCO C-3000

WELDING & CUTTING

LENCO C-3000 PORTABLE SPOT WELDER, S/N: A23407, WITH LEADS...

Hammer Price: 🔒

WELDING & CUTTING

OXYGEN/ACETYLENE CART WITH TORCH, HOSES, GAUGES, AND TANKS...

Hammer Price: 🔒

MISC

VARIOUS ELECTRONICS IN (1) BOX ON FLOOR...

Hammer Price: 🔒

POWERMATIC 1150A

METALWORKING & FABRICATION EQUIPMENT

POWERMATIC 1150A 15" FLOOR STANDING VARIABLE SPEED DRILL PRESS, 10" X 14" WORK SURFACE, 1-PH S/N: 78...

Hammer Price: 🔒

PIERCE-ALL PERF-O-MATOR

MISC

PIERCE-ALL PERF-O-MATOR PUNCHING MACHINE W/ TOOLING CABINETS FULL OF PIERCE-ALL TOOLING, DUPLICATOR ...

Hammer Price: 🔒

HECK TYPE 3C TRACE-A-PUNCH

METALWORKING & FABRICATION EQUIPMENT

HECK TYPE 3C TRACE-A-PUNCH NIBBLER, WITH STAND AND WORK LIGHT S/N: 12828...

Hammer Price: 🔒

HERCULES BI 644R21-2

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HERCULES BI 644R21-2 2-TON X 10' REACH FORK LIFT BOOM ATTACHMENT S/N: BI 557...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

96" LONG BRAKE DIE...

Hammer Price: 🔒

XENTREX

ELECTRICAL AND POWER GENERATION EQUIPMENT

XENTREX POWER SUPPLY...

Hammer Price: 🔒

MISC

75 BRAKE DIE...

Hammer Price: 🔒

PEXTO 36" INITIAL PINCH MANUAL BENDING ROLL

METALWORKING & FABRICATION EQUIPMENT

PEXTO 36" INITIAL PINCH MANUAL BENDING ROLL, 2 1/2" TOP ROLL, 2" LOWER ROLLS, WIRE GROOVES...

Hammer Price: 🔒

GREENERD NO. 4

PRESSES & FORMING

GREENERD NO. 4 FLOOR STANDING MANDREL PRESS S/N: N/A...

Hammer Price: 🔒

MISC

STAINLESS STEEL SHEET STOCK ON (1) PALLET ON (1) SHELF...

Hammer Price: 🔒

BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER

METALWORKING & FABRICATION EQUIPMENT

BROWN & SHARPE 6" X 18" HAND FEED SURFACE GRINDER, BROWN & SHARPE 6" X 18" PERMANENT MAGNET - BROWN ...

Hammer Price: 🔒

SCOTCHMAN BEWO 350-14

WOODWORKING EQUIPMENT

SCOTCHMAN BEWO 350-14 14" COLD SAW, CABINET BASED S/N: 38064671...

Hammer Price: 🔒

MISC

STEEL SQUARE HOLLOW TUBE, ANGLE IRON, C-CHANNEL, UNISTRUT, FLAT BAR, HOLLOW ROUND, ETC. STOCK ON FLO...

Hammer Price: 🔒

KINGSLEY

MISC

KINGSLEY WIRE MARKING TYPE MACHINE WITH TOOLING...

Hammer Price: 🔒

MISC

VARIOUS I/O ELECTRONICS IN (1) BOX...

Hammer Price: 🔒

BALDOR 410B

MISC

BALDOR 410B 8" X 1 1/2-HP DOUBLE END PEDESTAL TYPE BUFFER, 1-PH S/N: P1/00...

Hammer Price: 🔒

LONG BRAKE PUNCH

METALWORKING & FABRICATION EQUIPMENT

LONG BRAKE PUNCH...

Hammer Price: 🔒

MISC

BRAKE PUNCHES & DIES...

Hammer Price: 🔒

DEEP THROAT SPOT WELDER

WELDING & CUTTING

DEEP THROAT SPOT WELDER S/N: N/A...

Hammer Price: 🔒

MISC

CUTOFF STEEL SHEET STOCK ON (4) PALLET ON (1) SHELF...

Hammer Price: 🔒

MISC

MIXED ALLOY CUTOFF SHEET STOCK IN (1) STACK...

Hammer Price: 🔒

MISC

VARIOUS ALLOYS STOCK CUTOFFS ON (2) SHELVES...

Hammer Price: 🔒

GEO T. SCHMIDT

SURFACE FINISHING EQUIPMENT

GEO T. SCHMIDT MARKING MACHINE...

Hammer Price: 🔒

WELLS 8M

WOODWORKING EQUIPMENT

WELLS MODEL 8M 8" X 16" CAPACITY HORIZONTAL METAL CUTTING BAND SAW S/N: 16769, PORTABLE...

Hammer Price: 🔒

THERMAL DYNAMICS DYNAPAK 110

WELDING & CUTTING

THERMAL DYNAMICS DYNAPAK 110 AIR PLASMA CUTTING SYSTEM, PORTABLE, WITH LEADS...

Hammer Price: 🔒

1 2 3 4 5 ... 10 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Infra Corporation A Sheet Metal Fabrication Facility

Save to Project Folder

Print Options

Save to Project Folder