Surplus Of Equipment CNC And Conventional Mills Lathes Saws Fabrication CMM Inspection And Tooling

Reliable Equipment LLC

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 102

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 51–100 of 102 lots

Year	Make	Model	Lot Description	Hammer Price
			CARBIDE INSERTED DRILLS	🔒 Subscribe
	SUNNEN		SUNNEN HONE TOOLING SUNNEN	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS SCHUNK · HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS SCHUNK · HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS SCHUNK · HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS SCHUNK · HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS SCHUNK · HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
			CARBIDE INSERTED DRILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
	GRISETTI	RT-A1000	GRISETTI RT-A1000 GRINDER HYDRAULIC TANK / POWER SUPPLY 220/440V TANK DIMENSIONS: 24 X 11 X 12 H GRISETTI · RT-A1000	🔒 Subscribe
			5C COLLET INDEXING FIXTURE	🔒 Subscribe
			ATV HYDRAULIC LIFT 1,500 LBS. CAPACITY MAX LIFT 16" MIN LIFT 4"	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
		HORIZONTAL SAW MATERIAL SUPPORT WITH ROLLER & SWIVEL 22	HORIZONTAL SAW MATERIAL SUPPORT WITH ROLLER & SWIVEL 22 HORIZONTAL SAW MATERIAL SUPPORT WITH ROLLER & SWIVEL 22	🔒 Subscribe
	JACOBS		DRILL CHUCKS JACOBS JACOBS	🔒 Subscribe
	ACTEK	5,000 LBS. CAPICITY	ACTEK 5,000 LBS. CAPICITY LIFTING MAGNET ACTEK · 5,000 LBS. CAPICITY	🔒 Subscribe
	ACTEK	5,000 LBS. CAPICITY	ACTEK 5,000 LBS. CAPICITY LIFTING MAGNET ACTEK · 5,000 LBS. CAPICITY	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
	FEMCO	WP81	FEMCO WP81 ARBOR PRESS FEMCO · WP81	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE END MILLS	🔒 Subscribe
			TURRET PRESS PUNCHES	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE END MILLS	🔒 Subscribe
	BROWN & SHARPE	SUPER MICROMETER 4" CAPACITY	BROWN & SHARPE SUPER MICROMETER 4" CAPACITY - BROWN & SHARPE SUPER PRECISION MICROMETER 4 CAPACITY CC-3A STOCK 10923" BROWN & SHARPE · SUPER MICROMETER 4" CAPACITY	🔒 Subscribe
	EVERETT INDUSTRIES	12 MIT	EVERETT INDUSTRIES 12 MIT MITERING ABRASIVE CUT OF SAW 460V 3PH 5 HP EVERETT INDUSTRIES · 12 MIT	🔒 Subscribe
	SELLERS		SELLERS DRILL GRINDING SHARPENER MACHINE 220 3PH 1 HP SELLERS	🔒 Subscribe
	MAKINO	A55	MAKINO A55 HIGH PRESSURE COOLANT SYSTEM 2000 PSI 200/220 V 3PH CNC MILL MAKINO · A55	🔒 Subscribe
	CHAS G ALLEN CO	3 MULTI SPINDLE DRILL PRESS	CHAS G ALLEN CO 3 MULTI SPINDLE DRILL PRESS 250 TO 2000 RPM TABLE 21 X 54 DRILLING HEADS CENTER LINE 12 220/440 V 3PH 1 HP S/N: 12113 CHAS G ALLEN CO · 3 MULTI SPINDLE DRILL PRESS	🔒 Subscribe
	MITUTOYO	78" X 50" X 12"	MITUTOYO 78" X 50" X 12" THICK CMM QUALITY GRANITE SURFACE PLATE MITUTOYO · 78" X 50" X 12"	🔒 Subscribe
	MIDACO	SERIES 20	MIDACO SERIES 20 PALLET CHANGER WITH 3 PALLETS & RECEIVER PALLETS 16 X 14 3 PCS. RECEIVER 14 X 13 1 PCS. PALLET CHANGER 78 X 21 MIDACO · SERIES 20	🔒 Subscribe
	HOBART	12112	HOBART 12112 HOT WATER PARTS WASHER WITH DRYING PARTS FAN HOBART · 12112	🔒 Subscribe
	GLEASON	NO. 15	GLEASON NO. 15 BEVEL GEAR CHECKER - GLEASON NO. 15 BEVEL GEAR TESTER S/N: 765206 SPECIFICATIONS: DIAMETER OF GEAR BLANK MAXIMUM: 15" (381MM) DIAMETER OF GEAR BLANK MINIMUM: 2" (51MM) SPINDLE NOSE TO CROWN (MAXIMUM FOR GEARS AND PINIONS): 2" (51MM) SPINDLE NOSE TO CROWN (MINIMUM FOR PINIONS) BACK ANGLE UP TO 70-DEGREES: 4" (102MM) BACK ANGLE 70-75 DEGREES: 4.25 (108MM) BACK ANGLE 75-80 DEGREES: 4.5 (114MM) BACK ANGLE 80-95 DEGREES: 4.75 (121MM) BACK ANGLE OVER 85-DEGREES: 5 (127MM) TRAVEL OF INDICATOR (FACE ANGLE): 0 - 90 DEGREES TRAVEL OF INDICATOR (BACK ANGLE): 0 - 90 DEGREES MAXIMUM LENGTH BETWEEN CENTERS: 17.75 (450MM) MINIMUM LENGTH BETWEEN CENTERS: 6.5 (165MM) DIAMETER OF WORK SPINDLE BORE (LARGE END): 3-29/32" (99MM) SPINDLE TAPER PER FOOT: 39/64 (1:20) DEPTH OF SPINDLE TAPER: 6 (153MM) APPROX. FLOOR SPACE: 22"X 32-11/16" (560X830MM) APPROX. MACHINE NET WEIGHT: 1,900 LBS. (860 KGS) GLEASON · NO. 15	🔒 Subscribe
	MITUTOYO	CMM BHN-710	MITUTOYO CMM BHN-710 PHC9 PROBE HEAD CONTROL PI200 PROBE INTERFACE PHD10 PROBE HEAD DRIVE UNIT MITUTOYO CONTROL CMMC-3S/E MITUTOYO · CMM BHN-710	🔒 Subscribe
			HYDRAULIC PRESS 10 TON CAPACITY	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
	HYBCO	1100	HYBCO 1100 TAP GRINDER WITH TOOLING S/N: 7456 208/220/440V 3PH 14 HP SHARPENING HEAD 1 CAPACITY 2,3,4 FLUTE & ROL SHARPENING HEAD CAPACITY 1 12, 4,5,6 FLUTE & ROL STOCK 12107 HYBCO · 1100	🔒 Subscribe
			HEAVY DUTY DISC SANDER 14" DIAMETER 1 HP/1750 RPM 230/460 V 3PH. - HEAVY DUTY DISC SANDER 14 DIAMETER 1 HP/1750 RPM 230/460 V 3PH.	🔒 Subscribe
	PECK STOW & WILCOX CO	392-E	PECK STOW & WILCOX CO 392-E POWER ROLL FORMING MACHINE 20 GAGE CAPACITY 3" X 36" S/N: 6/53 PECK STOW & WILCOX CO · 392-E	🔒 Subscribe
	TCM	FCG2	TCM FCG2 FORKLIFT CANNOT START IT. TCM · FCG2	🔒 Subscribe
	SOLIDWORKS		SOLIDWORKS COMPLETE SET INCLUDING SOFTWARE DISC, KEY CODES & MANUAL SOLIDWORKS	🔒 Subscribe
1997	OKK	PCV-40	1997 OKK PCV-40 VERTICAL CNC MILL S/N: 507 MAIN SPECIFICATION TABLE SIZE 28.35" X 16.14" MAXIMUM TABLE LOAD 1,102 LBS SPINDLE NOSE TO TABLE TOP 7.87" - 24.02" X AXIS TRAVEL 22.05" Y AXIS TRAVEL 16.14" Z AXIS TRAVEL 16.14" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0.1 - 393 IPM SPINDLE SPEEDS 100 - 10000 RPM SPINDLE TAPER CAT 40 TOOL CHANGER CAPACITY (SIDE-ARM) 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SECONDS SPINDLE MOTOR 10 HP (DIRECT DRIVE) MAXIMUM TOOL WEIGHT 16 LBS WEIGHT, APPROX. 10,200 LBS DIMENSIONS, APPROX. 78"L X 88"W X 107"H EQUIPPED WITH: MITSUBISHI NEOMATIC 500M MELDAS CNC CTRL ETHERNET & RS-232 PORT INTERFACES FOR DNC OPERATIONS, RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING), SWING ARM TOOL CHANGER, CHIP WASHDOWN/CHIP-FLUSH FEATURE, REMOTE PULSE GENERATOR HAND-WHEEL, COOLANT SYSTEM AT SPINDLE W/TANK & PUMP CHIP CONVEYOR STOCK 12079" 1997 · OKK · PCV-40	🔒 Subscribe
1989	SUPERMAX	YCM-40	1989 SUPERMAX YCM-40 CNC VERTICAL MILL WITH CENTROID CONTROL 60 TO 4200 RPM 9 X 48 TABLE 40 TAPER SPINDLE 440/220 V 3 PHASE 3 AXIS S/N: 12339 1989 · SUPERMAX · YCM-40	🔒 Subscribe
2000	CHEVALIER	FALCON 1830MB	2000 CHEVALIER FALCON 1830MB CNC MILL ANILAM 3300M CONTROL 5HP S/N: MB906A02 POWER DRAW BAR #40 TAPER SPINDLE NST COOLANT TABLE 54 X 10 X: 30 Y: 18 Z: 22 STOCK 12077 2000 · CHEVALIER · FALCON 1830MB	🔒 Subscribe
1998	HITACHI SEIKI	CS20	1998 HITACHI SEIKI CS20 VERTICAL CNC LATHE 10L SEICOS CONTROL SN: CS20019 CHUCK SIZE 10" 3-JAW MAXIMUM SWING 13.8" MAXIMUM TURNING DIAMETER 13.8" MAXIMUM WORK LENGTH 6" X-AXIS TRAVEL (CHUCK WORKHOLDER) 51.57" Z-AXIS TRAVEL 14.57" SPINDLE NOSE A2-6 SPINDLE SPEEDS 30-5000 RPM SPINDLE DRIVE 15/10 HP/3/60/AC SPINDLE BORE 2.3" RAPID TRAVERSE RATE (X AND Z AXIS) 1181 IPM APPROXIMATE WEIGHT 11,000 LBS. EQUIPPED WITH: THE CS20 HITACHI SEIKI HAS THE VERTICAL SPINDLE DESIGN WHICH PROVIDES EASE OF LOAD AND LOAD. THE EXTENDED X-AXIS FOR CHUCK TRAVEL ALLOWS THE CHUCK TO LOAD AND UNLOAD THE PARTS. LOAD/UNLOAD CONVEYOR SYSTEM. 10" 3-JAW CHUCK. SEICOS 10L CNC CONTROL RS232 PORT AND GRAPHICS. 12-POSITION TURRET. COOLANT. STOCK 10773" 1998 · HITACHI SEIKI · CS20	🔒 Subscribe
1999	OKK	PCV-40	1999 OKK PCV-40 VERTICAL CNC MILL S/N: 643 MAIN SPECIFICATION TABLE SIZE 28.35" X 16.14" MAXIMUM TABLE LOAD 1,102 LBS SPINDLE NOSE TO TABLE TOP 7.87" - 24.02" X AXIS TRAVEL 22.05" Y AXIS TRAVEL 16.14" Z AXIS TRAVEL 16.14" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0.1 - 393 IPM SPINDLE SPEEDS 100 - 10000 RPM SPINDLE TAPER CAT 40 TOOL CHANGER CAPACITY (SIDE-ARM) 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SECONDS SPINDLE MOTOR 10 HP (DIRECT DRIVE) MAXIMUM TOOL WEIGHT 16 LBS WEIGHT, APPROX. 10,200 LBS DIMENSIONS, APPROX. 78"L X 88"W X 107"H EQUIPPED WITH: MITSUBISHI NEOMATIC 600M MELDAS CNC CTRL ETHERNET & RS-232 PORT INTERFACES FOR DNC OPERATIONS, RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING), SWING ARM TOOL CHANGER, CHIP WASHDOWN/CHIP-FLUSH FEATURE, REMOTE PULSE GENERATOR HAND-WHEEL, COOLANT SYSTEM AT SPINDLE W/TANK & PUMP / FILTRATION CHIP CONVEYOR 1999 · OKK · PCV-40	🔒 Subscribe

Year	Make	Model	Description	Price
			CARBIDE INSERTED DRILLS	🔒 Subscribe
	SUNNEN		SUNNEN HONE TOOLING	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
	SCHUNK	HIGH SPEED CAT 50 TAPER TOOL HOLDERS	SCHUNK HIGH SPEED CAT 50 TAPER TOOL HOLDERS	🔒 Subscribe
			CARBIDE INSERTED DRILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
	GRISETTI	RT-A1000	GRISETTI RT-A1000 GRINDER HYDRAULIC TANK / POWER SUPPLY 220/440V TANK DIMENSIONS: 24 X 11 X 12 H	🔒 Subscribe
			5C COLLET INDEXING FIXTURE	🔒 Subscribe
			ATV HYDRAULIC LIFT 1,500 LBS. CAPACITY MAX LIFT 16" MIN LIFT 4"	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
		HORIZONTAL SAW MATERIAL SUPPORT WITH ROLLER & SWIVEL 22	HORIZONTAL SAW MATERIAL SUPPORT WITH ROLLER & SWIVEL 22	🔒 Subscribe
	JACOBS		DRILL CHUCKS JACOBS	🔒 Subscribe
	ACTEK	5,000 LBS. CAPICITY	ACTEK 5,000 LBS. CAPICITY LIFTING MAGNET	🔒 Subscribe
	ACTEK	5,000 LBS. CAPICITY	ACTEK 5,000 LBS. CAPICITY LIFTING MAGNET	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
	FEMCO	WP81	FEMCO WP81 ARBOR PRESS	🔒 Subscribe
			CARBIDE TIP END MILLS	🔒 Subscribe
			CARBIDE END MILLS	🔒 Subscribe
			TURRET PRESS PUNCHES	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE END MILLS	🔒 Subscribe
	BROWN & SHARPE	SUPER MICROMETER 4" CAPACITY	BROWN & SHARPE SUPER MICROMETER 4" CAPACITY - BROWN & SHARPE SUPER PRECISION MICROMETER 4 CAPACITY CC-3A STOCK 10923"	🔒 Subscribe
	EVERETT INDUSTRIES	12 MIT	EVERETT INDUSTRIES 12 MIT MITERING ABRASIVE CUT OF SAW 460V 3PH 5 HP	🔒 Subscribe
	SELLERS		SELLERS DRILL GRINDING SHARPENER MACHINE 220 3PH 1 HP	🔒 Subscribe
	MAKINO	A55	MAKINO A55 HIGH PRESSURE COOLANT SYSTEM 2000 PSI 200/220 V 3PH CNC MILL	🔒 Subscribe
	CHAS G ALLEN CO	3 MULTI SPINDLE DRILL PRESS	CHAS G ALLEN CO 3 MULTI SPINDLE DRILL PRESS 250 TO 2000 RPM TABLE 21 X 54 DRILLING HEADS CENTER LINE 12 220/440 V 3PH 1 HP S/N: 12113	🔒 Subscribe
	MITUTOYO	78" X 50" X 12"	MITUTOYO 78" X 50" X 12" THICK CMM QUALITY GRANITE SURFACE PLATE	🔒 Subscribe
	MIDACO	SERIES 20	MIDACO SERIES 20 PALLET CHANGER WITH 3 PALLETS & RECEIVER PALLETS 16 X 14 3 PCS. RECEIVER 14 X 13 1 PCS. PALLET CHANGER 78 X 21	🔒 Subscribe
	HOBART	12112	HOBART 12112 HOT WATER PARTS WASHER WITH DRYING PARTS FAN	🔒 Subscribe
	GLEASON	NO. 15	GLEASON NO. 15 BEVEL GEAR CHECKER - GLEASON NO. 15 BEVEL GEAR TESTER S/N: 765206 SPECIFICATIONS: DIAMETER OF GEAR BLANK MAXIMUM: 15" (381MM) DIAMETER OF GEAR BLANK MINIMUM: 2" (51MM) SPINDLE NOSE TO CROWN (MAXIMUM FOR GEARS AND PINIONS): 2" (51MM) SPINDLE NOSE TO CROWN (MINIMUM FOR PINIONS) BACK ANGLE UP TO 70-DEGREES: 4" (102MM) BACK ANGLE 70-75 DEGREES: 4.25 (108MM) BACK ANGLE 75-80 DEGREES: 4.5 (114MM) BACK ANGLE 80-95 DEGREES: 4.75 (121MM) BACK ANGLE OVER 85-DEGREES: 5 (127MM) TRAVEL OF INDICATOR (FACE ANGLE): 0 - 90 DEGREES TRAVEL OF INDICATOR (BACK ANGLE): 0 - 90 DEGREES MAXIMUM LENGTH BETWEEN CENTERS: 17.75 (450MM) MINIMUM LENGTH BETWEEN CENTERS: 6.5 (165MM) DIAMETER OF WORK SPINDLE BORE (LARGE END): 3-29/32" (99MM) SPINDLE TAPER PER FOOT: 39/64 (1:20) DEPTH OF SPINDLE TAPER: 6 (153MM) APPROX. FLOOR SPACE: 22"X 32-11/16" (560X830MM) APPROX. MACHINE NET WEIGHT: 1,900 LBS. (860 KGS)	🔒 Subscribe
	MITUTOYO	CMM BHN-710	MITUTOYO CMM BHN-710 PHC9 PROBE HEAD CONTROL PI200 PROBE INTERFACE PHD10 PROBE HEAD DRIVE UNIT MITUTOYO CONTROL CMMC-3S/E	🔒 Subscribe
			HYDRAULIC PRESS 10 TON CAPACITY	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
			CARBIDE INSERTS	🔒 Subscribe
	HYBCO	1100	HYBCO 1100 TAP GRINDER WITH TOOLING S/N: 7456 208/220/440V 3PH 14 HP SHARPENING HEAD 1 CAPACITY 2,3,4 FLUTE & ROL SHARPENING HEAD CAPACITY 1 12, 4,5,6 FLUTE & ROL STOCK 12107	🔒 Subscribe
			HEAVY DUTY DISC SANDER 14" DIAMETER 1 HP/1750 RPM 230/460 V 3PH. - HEAVY DUTY DISC SANDER 14 DIAMETER 1 HP/1750 RPM 230/460 V 3PH.	🔒 Subscribe
	PECK STOW & WILCOX CO	392-E	PECK STOW & WILCOX CO 392-E POWER ROLL FORMING MACHINE 20 GAGE CAPACITY 3" X 36" S/N: 6/53	🔒 Subscribe
	TCM	FCG2	TCM FCG2 FORKLIFT CANNOT START IT.	🔒 Subscribe
	SOLIDWORKS		SOLIDWORKS COMPLETE SET INCLUDING SOFTWARE DISC, KEY CODES & MANUAL	🔒 Subscribe
1997	OKK	PCV-40	1997 OKK PCV-40 VERTICAL CNC MILL S/N: 507 MAIN SPECIFICATION TABLE SIZE 28.35" X 16.14" MAXIMUM TABLE LOAD 1,102 LBS SPINDLE NOSE TO TABLE TOP 7.87" - 24.02" X AXIS TRAVEL 22.05" Y AXIS TRAVEL 16.14" Z AXIS TRAVEL 16.14" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0.1 - 393 IPM SPINDLE SPEEDS 100 - 10000 RPM SPINDLE TAPER CAT 40 TOOL CHANGER CAPACITY (SIDE-ARM) 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SECONDS SPINDLE MOTOR 10 HP (DIRECT DRIVE) MAXIMUM TOOL WEIGHT 16 LBS WEIGHT, APPROX. 10,200 LBS DIMENSIONS, APPROX. 78"L X 88"W X 107"H EQUIPPED WITH: MITSUBISHI NEOMATIC 500M MELDAS CNC CTRL ETHERNET & RS-232 PORT INTERFACES FOR DNC OPERATIONS, RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING), SWING ARM TOOL CHANGER, CHIP WASHDOWN/CHIP-FLUSH FEATURE, REMOTE PULSE GENERATOR HAND-WHEEL, COOLANT SYSTEM AT SPINDLE W/TANK & PUMP CHIP CONVEYOR STOCK 12079"	🔒 Subscribe
1989	SUPERMAX	YCM-40	1989 SUPERMAX YCM-40 CNC VERTICAL MILL WITH CENTROID CONTROL 60 TO 4200 RPM 9 X 48 TABLE 40 TAPER SPINDLE 440/220 V 3 PHASE 3 AXIS S/N: 12339	🔒 Subscribe
2000	CHEVALIER	FALCON 1830MB	2000 CHEVALIER FALCON 1830MB CNC MILL ANILAM 3300M CONTROL 5HP S/N: MB906A02 POWER DRAW BAR #40 TAPER SPINDLE NST COOLANT TABLE 54 X 10 X: 30 Y: 18 Z: 22 STOCK 12077	🔒 Subscribe
1998	HITACHI SEIKI	CS20	1998 HITACHI SEIKI CS20 VERTICAL CNC LATHE 10L SEICOS CONTROL SN: CS20019 CHUCK SIZE 10" 3-JAW MAXIMUM SWING 13.8" MAXIMUM TURNING DIAMETER 13.8" MAXIMUM WORK LENGTH 6" X-AXIS TRAVEL (CHUCK WORKHOLDER) 51.57" Z-AXIS TRAVEL 14.57" SPINDLE NOSE A2-6 SPINDLE SPEEDS 30-5000 RPM SPINDLE DRIVE 15/10 HP/3/60/AC SPINDLE BORE 2.3" RAPID TRAVERSE RATE (X AND Z AXIS) 1181 IPM APPROXIMATE WEIGHT 11,000 LBS. EQUIPPED WITH: THE CS20 HITACHI SEIKI HAS THE VERTICAL SPINDLE DESIGN WHICH PROVIDES EASE OF LOAD AND LOAD. THE EXTENDED X-AXIS FOR CHUCK TRAVEL ALLOWS THE CHUCK TO LOAD AND UNLOAD THE PARTS. LOAD/UNLOAD CONVEYOR SYSTEM. 10" 3-JAW CHUCK. SEICOS 10L CNC CONTROL RS232 PORT AND GRAPHICS. 12-POSITION TURRET. COOLANT. STOCK 10773"	🔒 Subscribe
1999	OKK	PCV-40	1999 OKK PCV-40 VERTICAL CNC MILL S/N: 643 MAIN SPECIFICATION TABLE SIZE 28.35" X 16.14" MAXIMUM TABLE LOAD 1,102 LBS SPINDLE NOSE TO TABLE TOP 7.87" - 24.02" X AXIS TRAVEL 22.05" Y AXIS TRAVEL 16.14" Z AXIS TRAVEL 16.14" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0.1 - 393 IPM SPINDLE SPEEDS 100 - 10000 RPM SPINDLE TAPER CAT 40 TOOL CHANGER CAPACITY (SIDE-ARM) 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SECONDS SPINDLE MOTOR 10 HP (DIRECT DRIVE) MAXIMUM TOOL WEIGHT 16 LBS WEIGHT, APPROX. 10,200 LBS DIMENSIONS, APPROX. 78"L X 88"W X 107"H EQUIPPED WITH: MITSUBISHI NEOMATIC 600M MELDAS CNC CTRL ETHERNET & RS-232 PORT INTERFACES FOR DNC OPERATIONS, RIGID TAPPING (SYNCHRONOUS TAPPING / SOLID TAPPING), SWING ARM TOOL CHANGER, CHIP WASHDOWN/CHIP-FLUSH FEATURE, REMOTE PULSE GENERATOR HAND-WHEEL, COOLANT SYSTEM AT SPINDLE W/TANK & PUMP / FILTRATION CHIP CONVEYOR	🔒 Subscribe

CARBIDE INSERTED DRILLS

SUNNEN

SUNNEN HONE TOOLING...