Food Equipment Expo Surplus Food Processing Packaging Machinery
Category: TANKS, PUMPS & STORAGE EQUIPMENT
Total Lots:
235
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2014 | WERNER & PFLEIDERER HATON BV | PARTA SN |
2014 WERNER & PFLEIDERER HATON BV PARTA SN DOUGH DIVIDER (B300) S/N: H-641157, 3X480V, 60 HZ, WITH 12" X 44" SANITARY CONVEYOR, DOUGH HOPPER, STAINLESS, MOBILE.
|
🔒 Subscribe |
|
|
RYSON |
RYSON SPIRAL ELEVATOR FOR CASES OR BAGS, 12" WIDE PLASTIC SLATTED BELTING, WITH 4 TURNS, 3" HIGH INFEED, 11" HIGH DISCHARGE, 16" SPACING BETWEEN TURNS, 2HP GEARHEAD MOTOR, 230/460/3/60, AS IS
|
🔒 Subscribe | ||
|
|
CARRUTHERS | MS13001 |
CARRUTHERS MS13001 DICERS. ALL STAINLESS STEEL CONTACTS, HIGH VOLUME SLICER/DICER FOR FRESH, RAW OR PRE-COOKED MEATS AS WELL AS MANY OTHER PRODUCTS AT A RATE OF 20,000 POUNDS PER HOUR DEPENDING ON PRODUCT PER CUTTING, 30" (750MM) WIDE, CONTINUOUS FLOW CONVEYOR, UNEQUAL FLEXIBILITY CUT FROM 1/4" (6MM) TO OVER 6" (152MM) WITH ONE MACHINE. PROCESSING TEMPERATURES FROM 30 DEGREES TO 212 DEGREES FAHRENHEIT. ACCURATELY STRIPS, STEAKS, CUBES AND DICES THE MOST DELICATE PRODUCTS AS WELL AS THE TOUGHEST.
|
🔒 Subscribe | |
|
|
EILLERT | BL 1000 VAR |
EILLERT BL 1000 VAR DICER S/N: 157. UNIT INCLUDES ROTARY FEED TO STATIONARY CROSSCUT KNIFE ASSEMBLY WITH ADJUSTABLE SPACING. REQUIRES CIRCULAR KNIFE ASSEMBLY AND STRIPPER PLATE. INCLUDES CONTROLS AND MAIN DRIVE. DRIVEN BY 2-PHASE, 230 V MOTOR. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
URSCHEL | 3600 |
URSCHEL 3600 COMITROL DICER, STAINLESS STEEL, WITH 10 HP 3/60/220/440/3490 RPM DIRECT DRIVE MOTOR. S/N: 260. UNIT IS MISSING CUTTING HEAD, MOTOR NEEDS WORK.
|
🔒 Subscribe | |
|
|
URSCHEL | MG |
URSCHEL MG DICER, 15 HP BELT DRIVE WITH STANDARD CUTTING HEAD, S/N: 1106
|
🔒 Subscribe | |
|
|
TORRELLI SRL | TCN 130 |
TORRELLI SRL TCN 130 STAINLESS STEEL MEAT GRINDER, INCLUDES 19" X 30" WIDE PREPARATION AREA WITH 3" HIGH SIDE WALLS, WITH 4" DIAMETER OPENING, LEADING TO 4" DIAMETER SCREW DISCHARGE. RATED FOR UP TO 800 KG/HR. SCREW DRIVEN BY 5 HP MOTOR, DIRECT DRIVE THRU GEARBOX. RATED FOR 220/440 VOLT. S/N: 2863
|
🔒 Subscribe | |
|
|
SIX-HEAD PISTON FILLER/DEPOSITOR, STAINLESS STEEL CONTACTS. UNIT INCLUDES SIX (6) 1" DIAMETER MECHANICALLY OPERATED HEADS WITH PNEUMATICALLY CONTROLLED VALVES. FEED HOPPER MEASURING 21" X 15-1/2" X 28" DEEP. MOUNTED ON STAINLESS STEEL FRAME WITH CASTERS. PREVIOUSLY USED AT DESSERT MANUFACTURING FACILITY.
|
🔒 Subscribe | |||
|
|
LEGION | LT-40 |
LEGION LT-40 40 GALLON STEAM JACKETED KETTLE, 40PSI, 1.5? HORIZONTAL BOTTOM DISCHARGE WITH BUTTERFLY VALVE, TRI-CLOVER FITTINGS, S/N: 840697
|
🔒 Subscribe | |
|
|
PROCTOR SCHWARTZ | K19009 |
PROCTOR SCHWARTZ K19009 TRAY DRYER/OVEN, STAINLESS STEEL CONTACTS, 30" WIDE X 44" HIGH X 40" DEEP, INCLUDES (1) RAIL FOR CART AT 14-1/2" HIGH FROM BOTTOM OF TOP SECTION. BOTTOM SECTION IS 30" X 30" HIGH, INCLUDES BLOWER, BLOWING AIR THROUGH BOTTOM SECTION, DRIVEN BY 10 HP, 208 -230/460V, 1770 RPM, 3/60 HZ MOTOR THROUGH V-BELT DRIVE. ALSO INCLUDES TOP MOUNTED EXHAUST FAN.
|
🔒 Subscribe | |
|
|
2000 | AARON PROCESS | MBG200-125 |
2000 AARON PROCESS MBG200-125 VACUUM DRYER - SIGMA MIXER WITH CORED SHAFTS AND JACKETED TROUGH, ALL STAINLESS STEEL CONSTRUCTION, 200 GALLON (26.74 CUBIC FEET) CAPACITY. ALL PARTS ARE INSULATED AND SHEATHED WITH 304 STAINLESS STEEL AND POLISHED TO 150 - 180 GRIT FINISH. MIXING/DRYING CHAMBER INCLUDES VACUUM COVER AND IS JACKETED, RATED FOR 200 PSI AT 450 DEGREES FAHRENHEIT / NEGATIVE 20 DEGREES FAHRENHEIT, ASME CODE CONSTRUCTED. MIXING CHAMBER MEASURES 48" X 40" X 44" DEEP AND INCLUDES (2) 6" DIAMETER FLANGED DISCHARGES WITH BALL VALVES. BLADES ARE OVERLAPPING DOUBLE RIBBON BLADES AND DRIVEN BY 125 HP MOTOR THRU HEAVY DUTY GEARBOX, 160 AMPS AND 460 VOLTS. SERIAL NUMBER 00200125643MBG. PREVIOUSLY USED IN CLEAN ROOM TYPE ENVIRONMENT. WITH CONTROL PANEL AND UNITIZED ON HEAVY DUTY FRAME. INCLUDES MAIN CONTROL PANEL, POWER PANEL WITH STARTERS AND VFD'S, STEAM-TO-WATER HEAT EXCHANGER FOR HEATING OF JACKET AND HYDRAULIC PUMP/RESERVOIR FOR OPENING VESSEL LID. ALSO INCLUDES TOP MOUNTED, STAINLESS STEEL MIKRO PULSAIRE DUST COLLECTOR, MODEL 10-2-FV TR.
|
🔒 Subscribe |
|
|
BAKETEK |
BAKETEK BIN LIFT DUMPER, SET UP TO LIFT BOWLS OF DOUGH ONTO FOCACCIA MAKE-UP LINE, STAINLESS STEEL CONSTRUCTION. LIFT ASSEMBLY INCLUDES (2) RODS WITH 30" SPACING BETWEEN LIFTING ARMS. BOWLS ARE MECHANICALLY RAISED UP SCREW LIFT MECHANISM WITH TOP MOUNTED DRIVE, LIFTS/DUMPS PRODUCT AT APPROXIMATELY 11' HIGH. INCLUDES CONTROL BOX FOR UP, DOWN AND STOP. MOUNTED ON 30" X 39" BASE PLATE. RATED FOR 240 VOLT. PREVIOUSLY USED AT BAKERY.
|
🔒 Subscribe | ||
|
|
TOTER UNIVERSAL | WS-550 |
BIN DUMPER - TOTER UNIVERSAL STATIONARY LIFTER, CART LIFTER/DUMPER, MODEL WS-550. CART HOLDING SECTION MEASURES APPROXIMATELY 60" WIDE X 77" LONG AND INCLUDES BOTTOM MOUNTED FORKS. ALL UNITIZED WITHIN FRAME AND MOUNTS TO CONCRETE OR METAL PAD. RATED FOR UP TO 2500 LB. CAPACITY. DRIVEN BY 5 HP, 230 VOLT HYDRAULIC PUMP (PUMP NEEDS TO BE REPLACED). TOTAL HEIGHT ON FLOOR 106", DUMP HEIGHT AT 90 DEGREES = 90", DUMP EXIT AT FULL EXTENSION = 90", CYCLE TIME IS ABOUT 20 SECONDS UP AND 10 SECONDS DOWN (EMPTY). INCLUDES START/STOP CONTROLS. UNIT PREVIOUSLY USED IN FOOD (GUMMY) OPERATION.
|
🔒 Subscribe | |
|
|
NILFISK | S2 |
NILFISK S2 DUST COLLECTOR. 13 GALLON (50 LITER) TANK CAPACITY, INCLUDES CONTROL PANEL AND MOTORHEAD, PART NUMBER 4089100075. FEATURES 2.75" VACUUM HOSE CONNECTION. ELECTRICAL REQUIREMENTS: 120 V, SINGLE PHASE, 14.5 AMPS, 60 HZ, CORDED DESIGN. SERIAL NUMBER 3820142100215. CAN VACUUM DRY DEBRIS OR LIQUID, CAPABLE OF SEVERAL DIFFERENT CONFIGURATIONS INCLUDING HEPA FILTRATION. INCLUDES ACCESSORY STORAGE TRAY. PORTABLE ON WHEELS.
|
🔒 Subscribe | |
|
|
SOTTORIVA | SVP08-1 |
SOTTORIVA SVP08-1 DOUGH DIVIDER, AUTO PISTON DIVIDER, RATED FOR 200-1700 GM MINIMUM 660 TO 1620 MAXIMUM RANGE OF CAPACITY PER HOUR WITH 25" DIAMETER X 20" DEEP DOUGH HOPPER, AUTO DUSTER, WITH 12" WIDE X 75" LONG SANITARY DISCHARGE CONVEYOR, STAINLESS STEEL CONSTRUCTION. S/N: B7482
|
🔒 Subscribe | |
|
|
1999 | WERNER AND PFLEIDERER | TM-700 |
1999 WERNER AND PFLEIDERER HATON DOUGH DIVIDER, TYPE TM-700, 3X230V, 60 HZ, WITH 12" X 44" SANITARY CONVEYOR, DOUGH HOPPER, STAINLESS, MOBILE. S/N: 930133
|
🔒 Subscribe |
|
|
TEA BAG AUTOMATIC FILLING MACHINE WITH 12" DIAMETER X 24" DEEP CONICAL SHAPED HOPPER, DISCHARGES TO ROTATING TURNTABLE WITH (4) 1" DIAMETER POCKETS DISCHARGING TO 3" WIDE FORMING TUBE, DISCHARGES TO 1-1/2" WIDE FILL HEAD TO 4" WIDE ROTATING HEAT SEALER AND CUT OFF KNIFE ASSEMBLY. INCLUDES AUTOMATIC FEED SYSTEM FOR ROLL STOCK PACKAGING MATERIAL. INCLUDES SEVERAL SPARE PARTS. RATED FOR 220 VOLT.
|
🔒 Subscribe | |||
|
|
BARTELT | IM 7-14 |
BARTELT IM 7-14 HORIZONTAL FORM, FILL & SEAL MACHINE WITH SINGLE HEAD AUGER FILLER, SERVO-DRIVEN SYSTEM. INCLUDES AGITATED HOPPER WITH SERVO-DRIVEN AUGER AND SECONDARY FILLER. CONVEYING SECTION ALSO INCLUDES A SERVO-DRIVE. RATED FOR UP TO 100 CPM SERIAL NUMBER 3595. HAS A MECHANICAL PERFORMANCE RATE OF UP TO 120 CYCLES PER MINUTE AND PRODUCES POUCH SIZES FROM 2" WIDE X 2" HEIGHT TO 7.75" WIDE X 9.5" HEIGHT, 7? PITCH. THIS HAS A MECHANICAL PERFORMANCE RATE OF UP TO 100 CYCLES PER MINUTE. PREVIOUSLY FILLING JAPANESE POWDERED SOUP MIXES WITH PARTICULATES/VEGETABLES INTO 1.22-OUNCE AND 0.42-OUNCE PACKETS.
|
🔒 Subscribe | |
|
|
BUTCHER BOY | A4250H |
BUTCHER BOY A4250H MEAT GRINDER. INCLUDES STAINLESS STEEL COLLECTION TABLE MEASURING 44" LONG X 24" WIDE X 5" DEEP WITH 8" DIAMETER FEED LEADING TO 4" DIAMETER DISCHARGE WITH CARBON STEEL AUGER. DRIVEN BY 5 HP, 208V, 3/60HZ MOTOR. INCLUDES START/STOP SWITCH. OFFERED WITH DIE PLATES AND CUTOFF KNIVES.
|
🔒 Subscribe | |
|
|
MOLINE | PPS24 |
MOLINE PPS24 FOUR-HEAD PISTON FILLER/DEPOSITOR S/N: PPS72112. UNIT HAS FOUR (4) 3" DIAMETER AUGER CYLINDERS; TWO OF THE HEADS INCLUDE STAINLESS STEEL AUGERS. AUGERS ARE SPLIT TO TWO 1-1/2" DIAMETER FLEXIBLE HOSES WITH 1" DIAMETER OUTLETS. INCLUDES SMALL FEED HOPPER WITH AGITATOR ARMS. UNIT DRIVEN BY DODGE 262 TIGEAR RELIALUBE SYSTEM WITH APPROXIMATELY 5 HP MOTOR. START/STOP CONTROLS. MOUNTED ON STAINLESS STEEL FRAME. PREVIOUSLY USED AT DESSERT MANUFACTURING FACILITY.
|
🔒 Subscribe | |
|
|
IMPERIAL | IFS-40 |
IMPERIAL IFS-40 BATCH FRYER - DOUBLE BASKET FRYER, BATCH TYPE FRYER, STAINLESS STEEL CONSTRUCTION, NATURAL GAS-FIRED, RATED FOR 105,000 BTU. INCLUDES TWIN FRYER BASKETS MEASURING 6" X 12" X 5" DEEP, EACH. PREVIOUSLY USED IN CAFETERIA FOR MAJOR BEVERAGE PROCESSING FACILITY. S/N: 07165599
|
🔒 Subscribe | |
|
|
CREPACO | 5DD |
CREPACO 5DD HOMOGENIZER, 316 STAINLESS STEEL CONTACTS. UNIT IS A FIVE (5) PISTON TYPE HOMOGENIZER. INCLUDES MAIN DRIVE AND OIL PUMP. 2-1/2" INLET/OUTLET. PREVIOUSLY USED IN FOOD OPERATION. S/N: 5DD6-2466
|
🔒 Subscribe | |
|
|
PREWASH TANK, INCLUDES 48" WIDE X 60" LONG X 40" DEEP CARBON STEEL TANK, HALF OF TANK INCLUDES INCLINED SECTION, INCLINE SECTION HAS 38" WIDE X 48" LONG CLEATED RUBBER BELT CONVEYOR, 11-1/2" SPACING BETWEEN THE CLEATS, 56-1/2" DISCHARGE HEIGHT. INCLUDES PUMP UNITIZED ON BASE, DRIVEN BY 1 HP, 1725 RPM, 115/230V, 1-PHASE, 60 HZ MOTOR, PUMP FEEDS TO 2-1/2" DIAMETER SPRAY BAR MADE OF PVC PIPING. BELT IS DRIVEN BY FRACTIONAL HP MOTOR WITH ADJUSTABLE SPEED DC MOTOR CONTROLLER [REF NO C736561]
|
🔒 Subscribe | |||
|
|
GROEN | DH-20 |
STAINLESS STEEL GAS FIRED SELF-CONTAINED JACKETED KETTLE WITH TILT CAPABILITY, 316 STAINLESS STEEL BOWL. 20 GALLON CAPACITY. UNIT DRIVEN BY SINGLE PHASE 120V, 60 HZ MOTOR. UNIT IS GAS FIRED. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
2 TANK CIP SYSTEM WITH CONTROL PANEL
|
🔒 Subscribe | |||
|
|
CHERRY-BURRELL | VPT |
1,000 GALLON DOME TOP PROCESSOR - CHERRY-BURRELL MODEL VPT STAINLESS 1,000 GALLON DOME TOP, SLOPE BOTTOM PRESSURE WALL PROCESSOR, WIDE BOTTOM SWEEP AGITATION W/ BAFFLE, SPRAY BALL, 3" OUTLET, 15PSI RATED INTERNAL PRESSURE APPROX 75" DIA. X 102" H.
|
🔒 Subscribe | |
|
|
CHERRY-BURRELL | VPT |
1,000 GALLON DOME TOP PROCESSOR - CHERRY-BURRELL MODEL VPT STAINLESS 1,000 GALLON DOME TOP, SLOPE BOTTOM PRESSURE WALL PROCESSOR, WIDE BOTTOM SWEEP AGITATION W/ BAFFLE, SPRAY BALL, 3" OUTLET, 15PSI RATED INTERNAL PRESSURE APPROX 75" DIA. X 102" H.
|
🔒 Subscribe | |
|
|
KRONES | VP-GLO72-126 |
ROTARY BOTTLE FILLER - ROTARY FILLER & CAPPING SYSTEM, 72-VALVE FILLER, STAINLESS STEEL CONSTRUCTION, KRONES SENSOMETIC VP-GLO72-126, PRESSURE LESS FILLING SYSTEM, PNEUMATICALLY OPERATED VALVES, GRAVITY LONG TUBE FILLING NOZZLES, 1/2" DIAMETER, 126MM PITCH. PREVIOUSLY FILLING 10, 16 & 20 OZ. BOTTLES WITH JUICE. WTH ZALKIN 18-HEAD CAPPER, SET UP FOR "ROPP" (ROLL ON PILFER PROOF) CAPS (LESS CAPPING CHUCKS). INCLUDES DIVERSIFIED CAPPING, MODEL 111-600, FEED.
|
🔒 Subscribe | |
|
|
FOOD TOOLS, INC |
STAINLESS STEEL CRUMB SPREADER WITH MANUAL HOLD-DOWN. UNIT FEATURES ADJUSTABLE BOTTOM PLATE FROM 5.5" TO 11" DIAMETER. INCLUDES START/STOP CONTROLS. ELECTRIC DRIVE MOUNTED INSIDE CABINET.
|
🔒 Subscribe | ||
|
|
GRA LAB |
4-HEAD GRAVITY BOTTLE FILLER, EACH NOZZLE MEASURES APPROXIMATELY 1/2" DIAMETER. INCLUDES 12" X 18" X 12" DEEP PET LIQUID RESERVOIR. WITH "GRA LAB" FILLER CONTROLLER AND MOTOR MASTER 20,000 SERIES PUMP CONTROLLER WITH VARIABLE SPEED.
|
🔒 Subscribe | ||
|
|
CLEVELAND | KDL-60T SH |
STAINLESS STEEL JACKETED KETTLE WITH TILT CAPABILITY. 60 GALLON CAPACITY. BOWL MEASURES 33" DIAMETER X 24" DEEP WITH 1-1/2" CENTER BOTTOM DISCHARGE. JACKET RATED FOR 50 PSI @ 298 DEGREES FAHRENHEIT. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
GROEN | H60 |
STAINLESS STEEL JACKETED KETTLE, 60 GALLON CAPACITY. BOWL MEASURES 30" WIDE X 22" DEEP WITH 1-1/2" CENTER BOTTOM OUTLET. JACKET RATED FOR 40 PSI. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
JACKETED KETTLE - STAINLESS STEEL SCRAPE AGITATED MIX KETTLE, PREVIOUSLY USED ON CHOCOLATE. INTERIOR BOWL MEASURES 23-1/4" DIAMETER X 17" DEEP INCLUDES TOP MOUNTED DRIVE, 0.75 KW (1 HP) MOTOR THROUGH GEARBOX, SWEEP AGITATION WITH TEFLON SCRAPERS (ONE SCRAPER MISSING). KETTLE IS ELECTRICALLY HEATED WITH THREE ELECTRIC HEATERS INSTALLED BELOW JACKETED BOWL. INCLUDES CONTROL BOX. ALL UNITIZED ON STAINLESS STEEL A-FRAME
|
🔒 Subscribe | |||
|
|
LEGION | LGB-80 |
STAINLESS STEEL SELF-CONTAINED JACKETED KETTLE, 80 GALLON CAPACITY. BOWL MEASURES 33" DIAMETER X 28" DEEP WITH 1-1/2" SIDE BOTTOM DISCHARGE. JACKET RATED FOR 25 PSI @ 265 DEGREES FAHRENHEIT. MOUNTED ON 12" PIPE LEGS. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
RIETZ | RP-18-K133 |
RIETZ RP-18-K133 DISINTEGRATOR MILL. MILLING CHAMBER MEASURES 18" DIAMETER WITH 7" X 25" RECTANGULAR DISCHARGE. SCREEN INCLUDES 1-1/2" DIAMETER OPENINGS. DRIVEN BY 50 HP, 230/460V, 1775 RPM MOTOR. INCLUDES CONTROLS. MOUNTED ON STAINLESS STEEL FRAME. S/N: RP-91000422
|
🔒 Subscribe | |
|
|
KIRSTEN |
JACKETED KETTLE - STAINLESS STEEL VACUUM KETTLE/VACUUM PAN, APPROXIMATELY 600 GALLON CAPACITY. UNIT MEASURES 43" DIAMETER X 103" TALL WITH 24" JACKET ON BOTTOM OF VESSEL. INCLUDES 12" FLANGED TOP INLET AND 18" SIDE MANWAY WITH DOOR. 2" CENTER-BOTTOM OUTLET. MANUFACTURED BY KIRSTEN. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | ||
|
|
GROEN | DH/1-40 |
GROEN DH/1-40 JACKETED KETTLE - STAINLESS STEEL SELF CONTAINED KETTLE WITH TILT CAPABILITY, GAS-FIRED KETTLE, 316 STAINLESS STEEL BOWL. 40 GALLON CAPACITY. BOWL MEASURES 26" DIAMETER X 27" DEEP. JACKET IS RATED FOR 50 PSI AT 300 DEGREES FAHRENHEIT. PREVIOUSLY USED IN FOOD OPERATION. S/N: 70819
|
🔒 Subscribe | |
|
|
GROEN | DHT-40 |
GROEN DHT-40 JACKETED KETTLE - GAS-FIRED, SELF-CONTAINED KETTLE, ALL STAINLESS-STEEL CONSTRUCTION WITH TILT BOWL. BOWL MEASURES 26" DIAMETER X 22" DEEP INCLUDING 1-1/2" DIAMETER SIDE BOTTOM OUTLET WITH MANUAL VALVE, HINGED TOP LID AND POUR LIP. JACKETED BOWL, RATED FOR 50 PSI AT 300 DEGREES FAHRENHEIT. NATURE GAS-FIRED, 1000,000 BTU PER HOUR, 3.5" WC MANIFOLD GAS PRESSURE, 115V, SINGLE PHASE, 60 HZ. SERIAL NUMBER 123572, NATIONAL BOARD NUMBER 123572. LAST USED AT PRODUCTION KITCHEN FOR SUPPLYING SMALL CHAIN RESTAURANT.
|
🔒 Subscribe | |
|
|
SOUTHFIELD A. MIDDLEBY | KSLG-40 |
STAINLESS STEEL JACKETED KETTLE, 40 GALLON CAPACITY. UNIT IS A "STEAMMASTER" MODEL # KSLG-40. UNIT IS A SELF-CONTAINED GAS-FIRED KETTLE. 3" DIAMETER SIDE BOTTOM DISCHARGE. JACKET RATED FOR 50 PSI @ 292 DEGREES F. INCLUDES TOP HINGED LID. PREVIOUSLY USED IN FOOD OPERATION.
|
🔒 Subscribe | |
|
|
VERSAPPLY |
VERSAPPLY PRESSURE SENSITIVE LABELER, RATED FOR LABEL SIZES OF MINIMUM 0.75" WIDE X 0.75" LONG UP TO MAXIMUM OF 7" WIDE X 10' LONG. LABELING SPEED RATED FOR UP TO 750 LINEAR INCHES OF LABELS PER MINUTE. LABEL ROLL SIZE OF 12" MAXIMUM OD, 3" CORE ID. ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HZ, SINGLE PHASE, 2 AMPS. INCLUDES MULTI-DRIVE SPEED CONTROLLER [REF NO C744934]
|
🔒 Subscribe | ||
|
|
PIETRO BERTO | 200-POUND SPIRAL MIXER |
PIETRO BERTO 200-POUND SPIRAL MIXER, DOUGH MIXER. WITH STAINLESS STEEL BOWL MEASURING 25" DIAMETER X 15" DEEP AND HOOK ARM.
|
🔒 Subscribe | |
|
|
2005 | BAKERY EQUIPMENT SERVICE | BES-160-DB |
2005 BAKERY EQUIPMENT SERVICE BES-160-DB DOUGH MIXER, SPIRAL MIXER, 200 KG DOUGH CAPACITY, DIGITAL CONTROL, 220V, 3PH/60HZ, 1 HP. S/N: 2310067
|
🔒 Subscribe |
|
|
KRAFT CHEESE MIXER, 5 CUBIC FEET, 316 STAINLESS STEEL CONTACTS. PEAR SHAPED, 21" DIAMETER ON TOP WITH (2) PIECE STAINLESS STEEL COVER, 24" DIAMETER HEMISPHERICAL BOTTOM. WITH HORIZONTAL SIDE ENTERING WHISK BLADE TYPE AGITATOR 12" DIAMETER X 20" LONG. DRIVEN BY APPROXIMATELY 10 HP MOTOR AT 300 RPM WHISK SPEED. COVER HAS (2) 1-1/2" FLANGES, (1) 1" FLANGE. 2" DIAMETER CENTER BOTTOM OUTLET. MIXER IS MOUNTED ON STAND 48" LONG X 26" HIGH X 27" WIDE. MIXER ALSO HAS A CIP BALL AND SOME SPARES STRAPPED TO THE SIDE. SERIAL NUMBER C-51.
|
🔒 Subscribe | |||
|
|
FITZMILL | DASO-6 |
HAMMER MILL - FITZMILL DASO-6 UNIT HAS HORIZONTAL THROAT FEED, SINGLE EDGED KNIFE BLADES. 15 HP, 3520 RPM, 3-PHASE, 60 CYCLE, 230/460V. ON 48" HIGH STAND. S/N: 6926
|
🔒 Subscribe | |
|
|
MAGNUSON | HC MAGNUSCRUBBER |
MAGNUSON HC MAGNUSCRUBBER WITH RUBBER DISC ROLLS, LUBE SYSTEM, AND ALL COVERS/GUARDS. UNIT IS MISSING ONE MOTOR. PEELER HAS 16 ROLLS. S/N: 7759-2
|
🔒 Subscribe | |
|
|
RON BICHEL CO. |
STAINLESS STEEL PEELER, MANUFACTURED BY RON BICHEL CO. PEELING CHAMBER MEASURES 70" LONG X 28" WIDE. INCLUDES EIGHT (8) ABRASIVE ROLLERS MEASURING 7" DIAMETER X 70" LONG. UNIT INCLUDES 20" DIAMETER STAINLESS STEEL SCREW CONVEYING PORTION MOUNTED ON 2.5" DIAMETER CENTER SHAFT. TOP-MOUNTED WASHDOWN SECTION. PREVIOUSLY USED IN FOOD OPERATION S/N:S740994
|
🔒 Subscribe | ||
|
|
SINMAG | SM200T |
SINMAG SM200T SPIRAL MIXER, 200 KG BOWL, 2-SPEED, REVERSIBLE BOWL, WITH 36" DIAMETER X 20" DEEP HD STAINLESS BOWL. RATED FOR 10-120 KG /15-200 KG, FLOUR/DOUGH CAPACITY, 2-SPEED DIGITAL CONTROL, 11 RPM BOWL SPEED, 208/220 V, 3-PHASE, 60 HZ, 13.5 W. SERIAL NUMBER 1002007
|
🔒 Subscribe | |
|
|
2012 | SOTTORIVA | 200 AM |
2012 SOTTORIVA 200 AM DOUGH MIXER - TWIST/SPIRAL MIXER, FIXED, REVERSE BOWL ROTATION, 200 KG MAXIMUM DOUGH CAPACITY WITH SAFETY GRILL, 208 V, 3-PASE, 60 HZ, 11 KW. S/N: 847512
|
🔒 Subscribe |
|
|
OAKES | 8MV-5A |
OAKES 8MV-5A MIXER, HIGH SHEAR, TYPE 316 STAINLESS STEEL WITH 5 HP VARIABLE SPEED DRIVE, 2" FLANGED CONNECTIONS, 2 INJECTION PORTS ON INLET SIDE OF ROTOR AND 2 ON OUTLET SIDE. LAST USED ON CELLULOSE FIBERS IN CLEANSE RESEARCH & DEVELOPMENT FACILITY.
|
🔒 Subscribe | |
|
|
STAINLESS STEEL NAUTA MIXER, APPROXIMATELY 50 CUBIC FEET CAPACITY, MEASURES 6' DIAMETER X 8' DEEP, 60 DEGREE CONE WITH 10" DIAMETER CENTER BOTTOM OUTLET WITH DUST TIGHT VALVE. INCLUDES WELDED SIDE CONNECTION AT BOTTOM OF CONE WITH MANUALLY OPERATED 10" X 6" VALVE ON BOTTOM SIDE OF CONE, WITH ACCESS DOOR ON EACH SIDE. PREVIOUSLY MEZZANINE MOUNTED WITH (4) MILD STEEL MOUNTS ON SIDE OF CONE. TOP HEAD IS BOLTED WITH BRIDGE MOUNTED DRIVES, 28" X 10" CLAMPED TOP COVER, INCLUDING SAFETY GRATE AND 6" DIAMETER FLANGED OPENING. AUGER DRIVEN BY APPROXIMATELY 10 HP MOTOR THROUGH GEARBOX WITH APPROXIMATELY 2 HP AGITATOR ARM DRIVE. INCLUDES CONTROL PANEL INCLUDING CONTROLS FOR MIXING MODE, DISCHARGE MODE, NAUTA SCREW, NAUTA ARM, ROTARY VALVES AND DUST COLLECTOR (NOT OFFERED WITH ROTARY VALVE OR DUST COLLECTOR). PREVIOUSLY MIXING POWDER FOR FOOD PROCESSING FACILITY. UNIT WAS PREVIOUSLY MEZZANINE MOUNTED SO THERE ARE NO LEGS NOR FRAME.
|
🔒 Subscribe |
2014 WERNER & PFLEIDERER HATON BV PARTA SN
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2014 WERNER & PFLEIDERER HATON BV PARTA SN DOUGH DIVIDER (B300) S/N: H-641157, 3X480V, 60 HZ, WITH 1...
Hammer Price:
🔒
RYSON
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
RYSON SPIRAL ELEVATOR FOR CASES OR BAGS, 12" WIDE PLASTIC SLATTED BELTING, WITH 4 TURNS, 3" HIGH INF...
Hammer Price:
🔒
CARRUTHERS MS13001
FOOD PROCESSING AND RESTAURANT EQUIPMENT
CARRUTHERS MS13001 DICERS. ALL STAINLESS STEEL CONTACTS, HIGH VOLUME SLICER/DICER FOR FRESH, RAW OR ...
Hammer Price:
🔒
EILLERT BL 1000 VAR
FOOD PROCESSING AND RESTAURANT EQUIPMENT
EILLERT BL 1000 VAR DICER S/N: 157. UNIT INCLUDES ROTARY FEED TO STATIONARY CROSSCUT KNIFE ASSEMBLY ...
Hammer Price:
🔒
URSCHEL 3600
FOOD PROCESSING AND RESTAURANT EQUIPMENT
URSCHEL 3600 COMITROL DICER, STAINLESS STEEL, WITH 10 HP 3/60/220/440/3490 RPM DIRECT DRIVE MOTOR. S...
Hammer Price:
🔒
URSCHEL MG
FOOD PROCESSING AND RESTAURANT EQUIPMENT
URSCHEL MG DICER, 15 HP BELT DRIVE WITH STANDARD CUTTING HEAD, S/N: 1106...
Hammer Price:
🔒
TORRELLI SRL TCN 130
FOOD PROCESSING AND RESTAURANT EQUIPMENT
TORRELLI SRL TCN 130 STAINLESS STEEL MEAT GRINDER, INCLUDES 19" X 30" WIDE PREPARATION AREA WITH 3" ...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
SIX-HEAD PISTON FILLER/DEPOSITOR, STAINLESS STEEL CONTACTS. UNIT INCLUDES SIX (6) 1" DIAMETER MECHAN...
Hammer Price:
🔒
LEGION LT-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
LEGION LT-40 40 GALLON STEAM JACKETED KETTLE, 40PSI, 1.5? HORIZONTAL BOTTOM DISCHARGE WITH BUTTERFLY...
Hammer Price:
🔒
PROCTOR SCHWARTZ K19009
CHEMICAL PROCESSING EQUIPMENT
PROCTOR SCHWARTZ K19009 TRAY DRYER/OVEN, STAINLESS STEEL CONTACTS, 30" WIDE X 44" HIGH X 40" DEEP, I...
Hammer Price:
🔒
2000 AARON PROCESS MBG200-125
CHEMICAL PROCESSING EQUIPMENT
2000 AARON PROCESS MBG200-125 VACUUM DRYER - SIGMA MIXER WITH CORED SHAFTS AND JACKETED TROUGH, ALL ...
Hammer Price:
🔒
BAKETEK
FOOD PROCESSING AND RESTAURANT EQUIPMENT
BAKETEK BIN LIFT DUMPER, SET UP TO LIFT BOWLS OF DOUGH ONTO FOCACCIA MAKE-UP LINE, STAINLESS STEEL C...
Hammer Price:
🔒
TOTER UNIVERSAL WS-550
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BIN DUMPER - TOTER UNIVERSAL STATIONARY LIFTER, CART LIFTER/DUMPER, MODEL WS-550. CART HOLDING SECTI...
Hammer Price:
🔒
NILFISK S2
DUST COLLECTION EQUIPMENT
NILFISK S2 DUST COLLECTOR. 13 GALLON (50 LITER) TANK CAPACITY, INCLUDES CONTROL PANEL AND MOTORHEAD,...
Hammer Price:
🔒
SOTTORIVA SVP08-1
FOOD PROCESSING AND RESTAURANT EQUIPMENT
SOTTORIVA SVP08-1 DOUGH DIVIDER, AUTO PISTON DIVIDER, RATED FOR 200-1700 GM MINIMUM 660 TO 1620 MAXI...
Hammer Price:
🔒
1999 WERNER AND PFLEIDERER TM-700
FOOD PROCESSING AND RESTAURANT EQUIPMENT
1999 WERNER AND PFLEIDERER HATON DOUGH DIVIDER, TYPE TM-700, 3X230V, 60 HZ, WITH 12" X 44" SANITARY ...
Hammer Price:
🔒
PACKAGING EQUIPMENT
TEA BAG AUTOMATIC FILLING MACHINE WITH 12" DIAMETER X 24" DEEP CONICAL SHAPED HOPPER, DISCHARGES TO ...
Hammer Price:
🔒
BARTELT IM 7-14
PACKAGING EQUIPMENT
BARTELT IM 7-14 HORIZONTAL FORM, FILL & SEAL MACHINE WITH SINGLE HEAD AUGER FILLER, SERVO-DRIVEN SYS...
Hammer Price:
🔒
BUTCHER BOY A4250H
FOOD PROCESSING AND RESTAURANT EQUIPMENT
BUTCHER BOY A4250H MEAT GRINDER. INCLUDES STAINLESS STEEL COLLECTION TABLE MEASURING 44" LONG X 24" ...
Hammer Price:
🔒
MOLINE PPS24
PACKAGING EQUIPMENT
MOLINE PPS24 FOUR-HEAD PISTON FILLER/DEPOSITOR S/N: PPS72112. UNIT HAS FOUR (4) 3" DIAMETER AUGER CY...
Hammer Price:
🔒
IMPERIAL IFS-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
IMPERIAL IFS-40 BATCH FRYER - DOUBLE BASKET FRYER, BATCH TYPE FRYER, STAINLESS STEEL CONSTRUCTION, N...
Hammer Price:
🔒
CREPACO 5DD
FOOD PROCESSING AND RESTAURANT EQUIPMENT
CREPACO 5DD HOMOGENIZER, 316 STAINLESS STEEL CONTACTS. UNIT IS A FIVE (5) PISTON TYPE HOMOGENIZER. ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
PREWASH TANK, INCLUDES 48" WIDE X 60" LONG X 40" DEEP CARBON STEEL TANK, HALF OF TANK INCLUDES INCLI...
Hammer Price:
🔒
GROEN DH-20
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL GAS FIRED SELF-CONTAINED JACKETED KETTLE WITH TILT CAPABILITY, 316 STAINLESS STEEL B...
Hammer Price:
🔒
CHERRY-BURRELL VPT
CHEMICAL PROCESSING EQUIPMENT
1,000 GALLON DOME TOP PROCESSOR - CHERRY-BURRELL MODEL VPT STAINLESS 1,000 GALLON DOME TOP, SLOPE BO...
Hammer Price:
🔒
CHERRY-BURRELL VPT
CHEMICAL PROCESSING EQUIPMENT
1,000 GALLON DOME TOP PROCESSOR - CHERRY-BURRELL MODEL VPT STAINLESS 1,000 GALLON DOME TOP, SLOPE BO...
Hammer Price:
🔒
KRONES VP-GLO72-126
PACKAGING EQUIPMENT
ROTARY BOTTLE FILLER - ROTARY FILLER & CAPPING SYSTEM, 72-VALVE FILLER, STAINLESS STEEL CONSTRUCTION...
Hammer Price:
🔒
FOOD TOOLS, INC
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL CRUMB SPREADER WITH MANUAL HOLD-DOWN. UNIT FEATURES ADJUSTABLE BOTTOM PLATE FROM 5.5...
Hammer Price:
🔒
GRA LAB
CHEMICAL PROCESSING EQUIPMENT
4-HEAD GRAVITY BOTTLE FILLER, EACH NOZZLE MEASURES APPROXIMATELY 1/2" DIAMETER. INCLUDES 12" X 18" X...
Hammer Price:
🔒
CLEVELAND KDL-60T SH
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL JACKETED KETTLE WITH TILT CAPABILITY. 60 GALLON CAPACITY. BOWL MEASURES 33" DIAMETER...
Hammer Price:
🔒
GROEN H60
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL JACKETED KETTLE, 60 GALLON CAPACITY. BOWL MEASURES 30" WIDE X 22" DEEP WITH 1-1/2" C...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
JACKETED KETTLE - STAINLESS STEEL SCRAPE AGITATED MIX KETTLE, PREVIOUSLY USED ON CHOCOLATE. INTERIOR...
Hammer Price:
🔒
LEGION LGB-80
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL SELF-CONTAINED JACKETED KETTLE, 80 GALLON CAPACITY. BOWL MEASURES 33" DIAMETER X 28"...
Hammer Price:
🔒
RIETZ RP-18-K133
CHEMICAL PROCESSING EQUIPMENT
RIETZ RP-18-K133 DISINTEGRATOR MILL. MILLING CHAMBER MEASURES 18" DIAMETER WITH 7" X 25" RECTANGULAR...
Hammer Price:
🔒
KIRSTEN
FOOD PROCESSING AND RESTAURANT EQUIPMENT
JACKETED KETTLE - STAINLESS STEEL VACUUM KETTLE/VACUUM PAN, APPROXIMATELY 600 GALLON CAPACITY. UNIT ...
Hammer Price:
🔒
GROEN DH/1-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
GROEN DH/1-40 JACKETED KETTLE - STAINLESS STEEL SELF CONTAINED KETTLE WITH TILT CAPABILITY, GAS-FIRE...
Hammer Price:
🔒
GROEN DHT-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
GROEN DHT-40 JACKETED KETTLE - GAS-FIRED, SELF-CONTAINED KETTLE, ALL STAINLESS-STEEL CONSTRUCTION WI...
Hammer Price:
🔒
SOUTHFIELD A. MIDDLEBY KSLG-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL JACKETED KETTLE, 40 GALLON CAPACITY. UNIT IS A "STEAMMASTER" MODEL # KSLG-40. UNIT I...
Hammer Price:
🔒
VERSAPPLY
PACKAGING EQUIPMENT
VERSAPPLY PRESSURE SENSITIVE LABELER, RATED FOR LABEL SIZES OF MINIMUM 0.75" WIDE X 0.75" LONG UP TO...
Hammer Price:
🔒
PIETRO BERTO 200-POUND SPIRAL MIXER
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PIETRO BERTO 200-POUND SPIRAL MIXER, DOUGH MIXER. WITH STAINLESS STEEL BOWL MEASURING 25" DIAMETER X...
Hammer Price:
🔒
2005 BAKERY EQUIPMENT SERVICE BES-160-DB
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2005 BAKERY EQUIPMENT SERVICE BES-160-DB DOUGH MIXER, SPIRAL MIXER, 200 KG DOUGH CAPACITY, DIGITAL C...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
KRAFT CHEESE MIXER, 5 CUBIC FEET, 316 STAINLESS STEEL CONTACTS. PEAR SHAPED, 21" DIAMETER ON TOP WIT...
Hammer Price:
🔒
FITZMILL DASO-6
CHEMICAL PROCESSING EQUIPMENT
HAMMER MILL - FITZMILL DASO-6 UNIT HAS HORIZONTAL THROAT FEED, SINGLE EDGED KNIFE BLADES. 15 HP, 352...
Hammer Price:
🔒
MAGNUSON HC MAGNUSCRUBBER
FOOD PROCESSING AND RESTAURANT EQUIPMENT
MAGNUSON HC MAGNUSCRUBBER WITH RUBBER DISC ROLLS, LUBE SYSTEM, AND ALL COVERS/GUARDS. UNIT IS MISSIN...
Hammer Price:
🔒
RON BICHEL CO.
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL PEELER, MANUFACTURED BY RON BICHEL CO. PEELING CHAMBER MEASURES 70" LONG X 28" WIDE....
Hammer Price:
🔒
SINMAG SM200T
FOOD PROCESSING AND RESTAURANT EQUIPMENT
SINMAG SM200T SPIRAL MIXER, 200 KG BOWL, 2-SPEED, REVERSIBLE BOWL, WITH 36" DIAMETER X 20" DEEP HD ...
Hammer Price:
🔒
2012 SOTTORIVA 200 AM
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2012 SOTTORIVA 200 AM DOUGH MIXER - TWIST/SPIRAL MIXER, FIXED, REVERSE BOWL ROTATION, 200 KG MAXIMUM...
Hammer Price:
🔒
OAKES 8MV-5A
CHEMICAL PROCESSING EQUIPMENT
OAKES 8MV-5A MIXER, HIGH SHEAR, TYPE 316 STAINLESS STEEL WITH 5 HP VARIABLE SPEED DRIVE, 2" FLANGED ...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL NAUTA MIXER, APPROXIMATELY 50 CUBIC FEET CAPACITY, MEASURES 6' DIAMETER X 8' DEEP, 6...
Hammer Price:
🔒