Erickson Metals Corporation Aluminum Cold Rolling and Slitting Facility

Capital Recovery Group

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 135

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 135 lots

Make	Model	Lot Description	Hammer Price
INNOCENTI	ZR23-25 SENDZIMIR 20HI	INNOCENTI ZR23-25 SENDZIMIR 20HI ROLLING MILL, MAX WIDTH: 635 MM (25 IN.), MIN WIDTH: 318 MM (12.5 IN.), MAXIMUM MILL SPEED : 400 MPM (1312 FPM), MAXIMUM ENTRY THICKNESS: 3.0MM (.120 IN.), MINIMUM EXIT THICKNESS: .075 MM (.003 IN.), MAXIMUM TENSION: 10,600 KG (23,360 POUNDS), CLOSED LOOP COOLANT CHILLING SYSTEM WITH FILTERS, 1,000 HP DC MILL DRIVE, 800 HP DC WINDER DRIVE MOTORS, UPDATED ELECTRONICS AND CONTROLS, MASSIVE INVENTORY OF SPARE ROLLERS AND SPARE PARTS INCLUDED INNOCENTI · ZR23-25 SENDZIMIR 20HI	🔒 Subscribe
CINCINNATI MILACRON		CINCINNATI MILACRON ROLL GRINDER WITH SINE BAR, 16 IN. SWING X 48 IN. BETWEEN CENTERS, FANUC SPINDLE DRIVE, COOLANT FILTER SYSTEM, MIST EATER, ASSORTED FIXTURING CINCINNATI MILACRON	🔒 Subscribe
UPTON		UPTON CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 6 FT. X 6 FT. X 12 FT. DEEP ID, RADIANT TUBE NATURAL GAS, 1,100 F MAX. TEMP, DIGITAL TEMPERATURE CONTROLS, WITH OVER TEMP MONITORING, 25,000 LB. CAPACITY UPTON	🔒 Subscribe
HYSTER	S60FT	HYSTER S60FT FORKLIFT, 6000 LB CAPACITY, 181 INCH LIFT HEIGHT, 3 STAGE MAST, SIDE SHIFT, ROPS, SOLID TIRES, 6744 HRS HYSTER · S60FT	🔒 Subscribe
INDUSTRONICS		INDUSTRONICS CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 11 FT. X 8 FT. X 18 FT. DEEP ID, RADIANT TUBE NATURAL GAS, 1,100 F MAX. TEMP, 50,000 LB. CAPACITY INDUSTRONICS	🔒 Subscribe
LOOPCO/YODER	LOOP SLITTING LINE	LOOPCO/YODER LOOP SLITTING LINE, THICKNESS RANGE - .125 IN.- 0.015 IN., MAX COIL WEIGHT - 20,000, - LOOPCO/YODER LOOP SLITTING LINE, THICKNESS RANGE - .125 IN. - 0.015 IN., MAX COIL WEIGHT - 20,000, ARBOR DIAMETER - 4 IN. , ID RANGE - 16 IN./20 IN. , L-SHAPED TRAVERSING COIL CAR, YODER EXPANDING MANDREL PAYOFF WITH HOLD DOWN ROLL, BILLY ROLL STAND WITH PEELER TABLE, YODER SLITTING HEAD WITH PINCH ROLL, 25 HP DC MOTOR DRIVE, 115/200 ROM, 240V, YODER SCRAP WINDER, CARRY-OVER TABLE, LOOPCO DRAG PAD TENSION STAND WITH STRILICH PINCH ROLLS, MANDREL RECOILER WITH HOLD DOWN ROLL, 2 ARM EXIT TURNSTILE, COMPLETE ASSORTMENT OF TOOLING AND SPARE PARTS LOOPCO/YODER · LOOP SLITTING LINE	🔒 Subscribe
		STRIP LINE HYDRAULIC COIL UP-ENDER, 12,500 LB CAPACITY	🔒 Subscribe
NATIONAL	58 INCH X 1/4 INCH CAPACITY	NATIONAL 58 INCH X 1/4 INCH CAPACITY SOFT METAL SHEAR, WITH FOOT PEDAL CONTROL, 3 PHASE NATIONAL · 58 INCH X 1/4 INCH CAPACITY	🔒 Subscribe
CLARY		CLARY PALLET SHRINK WRAPPER, 6 FT ROTARY TABLE, 3 PHASE CLARY	🔒 Subscribe
DEMPSTER BROTHERS		DEMPSTER BROTHERS METAL BALER, 22 INCH X 18 INCH X 58 INCH BALES, 3 PHASE DEMPSTER BROTHERS	🔒 Subscribe
RAYMOND	MN 60-C50TT	RAYMOND MN 60-C50TT STAND UP 36 VOLT ELECTRIC FORKLIFT, 5000 LB CAPACITY, 178 INCH MAX LIFT HEIGHT, 2-STAGE MAST, ROPS, SOLID TIRES, S/N: 7567 WITH 32 INCH BOOM ATTACHMENT RAYMOND · MN 60-C50TT	🔒 Subscribe
		12 IN. - 20 IN. DIAMETER X 24 IN. CORE CUTTER	🔒 Subscribe
INGERSOLL RAND	IRN30H-CC HV	INGERSOLL RAND IRN30H-CC HV AIR COMPRESSOR S/N: CBV115528 INGERSOLL RAND · IRN30H-CC HV	🔒 Subscribe
		FLAT COIL ANNEALING TRAYS CONSISTING OF (5) SMALL FLAT RACK, 34 IN. X 60 IN., AND (4) LARGE FLAT RACKS, 62 IN. X 62 IN.	🔒 Subscribe
WILTON	7020	WILTON 7020 17 INCH THROAT HORIZONTAL METAL CUTTING BANDSAW, 1750 RPM, 1 1/2 HP, WITH (2) STANDS WILTON · 7020	🔒 Subscribe
TISHKEN	PULL-THRU SLITTING LINE	TISHKEN PULL-THRU SLITTING LINE, MAX WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 IN., MAX WEIGHT - 5,000 LBS, 24 IN. X 5,000# COOPER WEYMOUTH UNCOILER, 16 IN. - 20 IN. ID, TISHKEN SLITTING HEAD, 3.5 IN. ARBOR, 15 HP MOTOR, SCRAP WINDER, EXIT STOCK REEL, 6 IN., 8 IN., 12 IN. AND 16 IN. ID TISHKEN · PULL-THRU SLITTING LINE	🔒 Subscribe
MAHR FEDERAL	POCKET SURF III	MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER MAHR FEDERAL · POCKET SURF III	🔒 Subscribe
INDUSTRONICS		INDUSTRONICS ROLL IN BED ANNEALING FURNACE, NITROGEN ATMOSPHERE, 40 IN. X 62 IN. X 28 IN. ID, 37 IN. X 21 IN. DOOR OPENING, 1,100 F MAX. TEMPERATURE, RADIANT TUBE NATURAL GAS, DIGITAL TEMPERATURE CONTROLS, 1,500 LB. CAPACITY INDUSTRONICS	🔒 Subscribe
ORGAPAC	OR-T 200	ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STATION ORGAPAC · OR-T 200	🔒 Subscribe
BUSHMAN	3 1/2 TON	BUSHMAN 3 1/2 TON BELOW HOOK LIFTING CLAMP BUSHMAN · 3 1/2 TON	🔒 Subscribe
INGERSOLL-RAND	SSR-EP15U	INGERSOLL-RAND SSR-EP15U ROTARY SCREW AIR COMPRESSOR, 15 HP, 3PH S/N: J4739U93257 INGERSOLL-RAND · SSR-EP15U	🔒 Subscribe
RICELAKE	420	48 INCH X 72 INCH PLATFORM SCALE WITH RICELAKE 420 DIGITAL READOUT, 10,000 LB CAPACITY RICELAKE · 420	🔒 Subscribe
BALDOR	50 HP	BALDOR 50 HP AC DRIVE MOTOR, 1775 RPM, 230/460 VOLT, 325T FRAME BALDOR · 50 HP	🔒 Subscribe
ABELL AND HOWE	2 TON JIB CRANE	ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST ABELL AND HOWE · 2 TON JIB CRANE	🔒 Subscribe
WATERBURY FARREL		WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 24 IN., THICKNESS RANGE - 0.006 IN.- 0.090 IN., MAX WEIGHT - 10,000 LBS., CMP 10K 36P MANDREL UNCOILER, 16 IN.-20 IN. ID, 60 IN. OD, WF SLITTING HEAD 3.5 IN. ARBOR, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM, 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID WATERBURY FARREL	🔒 Subscribe
WATERBURY FARREL	PULL-THRU SLITTING LINE	WATERBURY FARREL PULL-THRU SLITTING LINE, MAX. WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 IN., MAX WEIGHT - 5,000 LBS, 24 IN. X 5,000# COOPER WEYMOUTH UNCOILER, WAERBURY FARREL SLITTING HEAD, 2 5/8 IN. ARBOR, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM , 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID WATERBURY FARREL · PULL-THRU SLITTING LINE	🔒 Subscribe
POWER SURVEY	BLR-CM	POWER SURVEY BLR-CM POWER FACTOR CONTROL RELAY POWER SURVEY · BLR-CM	🔒 Subscribe
DIAGNOSTIC INSTRUMENTS	DI-2200	DIAGNOSTIC INSTRUMENTS DI-2200 REAL TIME FFT ANALYZER DIAGNOSTIC INSTRUMENTS · DI-2200	🔒 Subscribe
		LOT OF (12) SUSPENDED COIL ANNEALING STANDS	🔒 Subscribe
GE	TPVVF5616	GE TPVVF5616 INSULATED CIRCUIT BREAKER UNIT GE · TPVVF5616	🔒 Subscribe
WATERBURY FARREL		WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 9.5 IN., THICKNESS RANGE - 0.006 IN.- 0.050 IN., MAX WEIGHT - 1,000 LBS, STOCK REEL, WATERBURY FARREL SLITTING HEAD, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM, 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID WATERBURY FARREL	🔒 Subscribe
ORGAPAC	OR-T 200	ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STATION ORGAPAC · OR-T 200	🔒 Subscribe
KONE, YALE	3 TON ELECTRIC HOIST, 3 TON ELECTRIC HOIST	OVERHEAD CRANE SYSTEM WITH (2) CRANES TO INCLUDE, 28 FEET WIDE X 24 FEET LONG X 144 INCH HIGH STEEL FRAME WORK, KONE 3 TON ELECTRIC HOIST WITH 108 INCH SPAN AND YALE 3 TON ELECTRIC HOIST WITH 134 INCH SPAN KONE, YALE · 3 TON ELECTRIC HOIST, 3 TON ELECTRIC HOIST	🔒 Subscribe
CUB CADET	LTX1045	CUB CADET LTX1045 HYDROSTATIC RIDING LAWNMOWER WITH BAG CATCHER (NEEDS NEW BATTERY AND FLUID CHANGE, HASNT BEEN STARTED SINCE LAST FALL) CUB CADET · LTX1045	🔒 Subscribe
ABELL AND HOWE	2 TON JIB CRANE	ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST ABELL AND HOWE · 2 TON JIB CRANE	🔒 Subscribe
MITUTOYO	MN 201-152, MN 201-153, MN 201-154, MN 201-156	MITUTOYO MN 201-152, MN 201-153, MN 201-154, MN 201-156 DIAL SNAP GAUGES. INCLUDES (3) 1-2 INCH MN 201-152, (1) 2-3 INCH MN 201-153, (1) 3-4 INCH MN 201-154, AND (1) 5-6 INCH MN 201-156 MITUTOYO · MN 201-152, MN 201-153, MN 201-154, MN 201-156	🔒 Subscribe
		LOT OF (7) WALL MOUNTED INDUSTRIAL FANS	🔒 Subscribe
GULF HARMONY	AW68	GULF HARMONY AW68 HYDRAULIC OIL 55 GALLON DRUMS GULF HARMONY · AW68	🔒 Subscribe
GORBEL	2 TON JIB CRANE	GORBEL 2 TON JIB CRANE, 18 FOOT BEAM MOUNTED WITH COFFING JLC 2 TON ELECTRIC HOIST GORBEL · 2 TON JIB CRANE	🔒 Subscribe
JUST RITE		JUST RITE FLAMMABLE LIQUIDS STORAGE CABINET JUST RITE	🔒 Subscribe
CRAFTSMAN	65418	CRAFTSMAN 65418 ROLLING TOOL CABINET WITH CONTENTS, 27 IN. X 18 IN. X 42 IN.(H) CRAFTSMAN · 65418	🔒 Subscribe
GORBEL	1/2 TON JIB CRANE	GORBEL 1/2 TON JIB CRANE, 8 FOOT BEAM MOUNTED WITH BUDGIT 2 TON ELECTRIC HOIST GORBEL · 1/2 TON JIB CRANE	🔒 Subscribe
PAC	PSM 1412-IC3	PAC PSM 1412-IC3 ELECTRIC STRAPPING TABLE, PORTABLE ON WHEELS, 1 PH PAC · PSM 1412-IC3	🔒 Subscribe
TOLEDO	HONEST WEIGHT	TOLEDO HONEST WEIGHT PORTABLE PLATFORM SCALE, 500 LB CAPACITY TOLEDO · HONEST WEIGHT	🔒 Subscribe
WILKERSON		WILKERSON REGULATORS, ASHCROFT GAUGES, ASCO RED HAT VALVES WILKERSON	🔒 Subscribe
MAHR FEDERAL	POCKET SURF III	MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER MAHR FEDERAL · POCKET SURF III	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR MAKITA	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR MAKITA	🔒 Subscribe
ASTROLINE	10 TON TRUCK HYDRAULIC FLOOR JACK	ASTROLINE 10 TON TRUCK HYDRAULIC FLOOR JACK ASTROLINE · 10 TON TRUCK HYDRAULIC FLOOR JACK	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR MAKITA	🔒 Subscribe

Make	Model	Description	Price
INNOCENTI	ZR23-25 SENDZIMIR 20HI	INNOCENTI ZR23-25 SENDZIMIR 20HI ROLLING MILL, MAX WIDTH: 635 MM (25 IN.), MIN WIDTH: 318 MM (12.5 IN.), MAXIMUM MILL SPEED : 400 MPM (1312 FPM), MAXIMUM ENTRY THICKNESS: 3.0MM (.120 IN.), MINIMUM EXIT THICKNESS: .075 MM (.003 IN.), MAXIMUM TENSION: 10,600 KG (23,360 POUNDS), CLOSED LOOP COOLANT CHILLING SYSTEM WITH FILTERS, 1,000 HP DC MILL DRIVE, 800 HP DC WINDER DRIVE MOTORS, UPDATED ELECTRONICS AND CONTROLS, MASSIVE INVENTORY OF SPARE ROLLERS AND SPARE PARTS INCLUDED	🔒 Subscribe
CINCINNATI MILACRON		CINCINNATI MILACRON ROLL GRINDER WITH SINE BAR, 16 IN. SWING X 48 IN. BETWEEN CENTERS, FANUC SPINDLE DRIVE, COOLANT FILTER SYSTEM, MIST EATER, ASSORTED FIXTURING	🔒 Subscribe
UPTON		UPTON CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 6 FT. X 6 FT. X 12 FT. DEEP ID, RADIANT TUBE NATURAL GAS, 1,100 F MAX. TEMP, DIGITAL TEMPERATURE CONTROLS, WITH OVER TEMP MONITORING, 25,000 LB. CAPACITY	🔒 Subscribe
HYSTER	S60FT	HYSTER S60FT FORKLIFT, 6000 LB CAPACITY, 181 INCH LIFT HEIGHT, 3 STAGE MAST, SIDE SHIFT, ROPS, SOLID TIRES, 6744 HRS	🔒 Subscribe
INDUSTRONICS		INDUSTRONICS CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 11 FT. X 8 FT. X 18 FT. DEEP ID, RADIANT TUBE NATURAL GAS, 1,100 F MAX. TEMP, 50,000 LB. CAPACITY	🔒 Subscribe
LOOPCO/YODER	LOOP SLITTING LINE	LOOPCO/YODER LOOP SLITTING LINE, THICKNESS RANGE - .125 IN.- 0.015 IN., MAX COIL WEIGHT - 20,000, - LOOPCO/YODER LOOP SLITTING LINE, THICKNESS RANGE - .125 IN. - 0.015 IN., MAX COIL WEIGHT - 20,000, ARBOR DIAMETER - 4 IN. , ID RANGE - 16 IN./20 IN. , L-SHAPED TRAVERSING COIL CAR, YODER EXPANDING MANDREL PAYOFF WITH HOLD DOWN ROLL, BILLY ROLL STAND WITH PEELER TABLE, YODER SLITTING HEAD WITH PINCH ROLL, 25 HP DC MOTOR DRIVE, 115/200 ROM, 240V, YODER SCRAP WINDER, CARRY-OVER TABLE, LOOPCO DRAG PAD TENSION STAND WITH STRILICH PINCH ROLLS, MANDREL RECOILER WITH HOLD DOWN ROLL, 2 ARM EXIT TURNSTILE, COMPLETE ASSORTMENT OF TOOLING AND SPARE PARTS	🔒 Subscribe
		STRIP LINE HYDRAULIC COIL UP-ENDER, 12,500 LB CAPACITY	🔒 Subscribe
NATIONAL	58 INCH X 1/4 INCH CAPACITY	NATIONAL 58 INCH X 1/4 INCH CAPACITY SOFT METAL SHEAR, WITH FOOT PEDAL CONTROL, 3 PHASE	🔒 Subscribe
CLARY		CLARY PALLET SHRINK WRAPPER, 6 FT ROTARY TABLE, 3 PHASE	🔒 Subscribe
DEMPSTER BROTHERS		DEMPSTER BROTHERS METAL BALER, 22 INCH X 18 INCH X 58 INCH BALES, 3 PHASE	🔒 Subscribe
RAYMOND	MN 60-C50TT	RAYMOND MN 60-C50TT STAND UP 36 VOLT ELECTRIC FORKLIFT, 5000 LB CAPACITY, 178 INCH MAX LIFT HEIGHT, 2-STAGE MAST, ROPS, SOLID TIRES, S/N: 7567 WITH 32 INCH BOOM ATTACHMENT	🔒 Subscribe
		12 IN. - 20 IN. DIAMETER X 24 IN. CORE CUTTER	🔒 Subscribe
INGERSOLL RAND	IRN30H-CC HV	INGERSOLL RAND IRN30H-CC HV AIR COMPRESSOR S/N: CBV115528	🔒 Subscribe
		FLAT COIL ANNEALING TRAYS CONSISTING OF (5) SMALL FLAT RACK, 34 IN. X 60 IN., AND (4) LARGE FLAT RACKS, 62 IN. X 62 IN.	🔒 Subscribe
WILTON	7020	WILTON 7020 17 INCH THROAT HORIZONTAL METAL CUTTING BANDSAW, 1750 RPM, 1 1/2 HP, WITH (2) STANDS	🔒 Subscribe
TISHKEN	PULL-THRU SLITTING LINE	TISHKEN PULL-THRU SLITTING LINE, MAX WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 IN., MAX WEIGHT - 5,000 LBS, 24 IN. X 5,000# COOPER WEYMOUTH UNCOILER, 16 IN. - 20 IN. ID, TISHKEN SLITTING HEAD, 3.5 IN. ARBOR, 15 HP MOTOR, SCRAP WINDER, EXIT STOCK REEL, 6 IN., 8 IN., 12 IN. AND 16 IN. ID	🔒 Subscribe
MAHR FEDERAL	POCKET SURF III	MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER	🔒 Subscribe
INDUSTRONICS		INDUSTRONICS ROLL IN BED ANNEALING FURNACE, NITROGEN ATMOSPHERE, 40 IN. X 62 IN. X 28 IN. ID, 37 IN. X 21 IN. DOOR OPENING, 1,100 F MAX. TEMPERATURE, RADIANT TUBE NATURAL GAS, DIGITAL TEMPERATURE CONTROLS, 1,500 LB. CAPACITY	🔒 Subscribe
ORGAPAC	OR-T 200	ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STATION	🔒 Subscribe
BUSHMAN	3 1/2 TON	BUSHMAN 3 1/2 TON BELOW HOOK LIFTING CLAMP	🔒 Subscribe
INGERSOLL-RAND	SSR-EP15U	INGERSOLL-RAND SSR-EP15U ROTARY SCREW AIR COMPRESSOR, 15 HP, 3PH S/N: J4739U93257	🔒 Subscribe
RICELAKE	420	48 INCH X 72 INCH PLATFORM SCALE WITH RICELAKE 420 DIGITAL READOUT, 10,000 LB CAPACITY	🔒 Subscribe
BALDOR	50 HP	BALDOR 50 HP AC DRIVE MOTOR, 1775 RPM, 230/460 VOLT, 325T FRAME	🔒 Subscribe
ABELL AND HOWE	2 TON JIB CRANE	ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST	🔒 Subscribe
WATERBURY FARREL		WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 24 IN., THICKNESS RANGE - 0.006 IN.- 0.090 IN., MAX WEIGHT - 10,000 LBS., CMP 10K 36P MANDREL UNCOILER, 16 IN.-20 IN. ID, 60 IN. OD, WF SLITTING HEAD 3.5 IN. ARBOR, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM, 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID	🔒 Subscribe
WATERBURY FARREL	PULL-THRU SLITTING LINE	WATERBURY FARREL PULL-THRU SLITTING LINE, MAX. WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 IN., MAX WEIGHT - 5,000 LBS, 24 IN. X 5,000# COOPER WEYMOUTH UNCOILER, WAERBURY FARREL SLITTING HEAD, 2 5/8 IN. ARBOR, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM , 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID	🔒 Subscribe
POWER SURVEY	BLR-CM	POWER SURVEY BLR-CM POWER FACTOR CONTROL RELAY	🔒 Subscribe
DIAGNOSTIC INSTRUMENTS	DI-2200	DIAGNOSTIC INSTRUMENTS DI-2200 REAL TIME FFT ANALYZER	🔒 Subscribe
		LOT OF (12) SUSPENDED COIL ANNEALING STANDS	🔒 Subscribe
GE	TPVVF5616	GE TPVVF5616 INSULATED CIRCUIT BREAKER UNIT	🔒 Subscribe
WATERBURY FARREL		WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 9.5 IN., THICKNESS RANGE - 0.006 IN.- 0.050 IN., MAX WEIGHT - 1,000 LBS, STOCK REEL, WATERBURY FARREL SLITTING HEAD, SCRAP WINDER, MANDREL RECOILER WITH SOLID DRUM, 6 IN., 8 IN., 12 IN., 16 IN. AND 20 IN. ID	🔒 Subscribe
ORGAPAC	OR-T 200	ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STATION	🔒 Subscribe
KONE, YALE	3 TON ELECTRIC HOIST, 3 TON ELECTRIC HOIST	OVERHEAD CRANE SYSTEM WITH (2) CRANES TO INCLUDE, 28 FEET WIDE X 24 FEET LONG X 144 INCH HIGH STEEL FRAME WORK, KONE 3 TON ELECTRIC HOIST WITH 108 INCH SPAN AND YALE 3 TON ELECTRIC HOIST WITH 134 INCH SPAN	🔒 Subscribe
CUB CADET	LTX1045	CUB CADET LTX1045 HYDROSTATIC RIDING LAWNMOWER WITH BAG CATCHER (NEEDS NEW BATTERY AND FLUID CHANGE, HASNT BEEN STARTED SINCE LAST FALL)	🔒 Subscribe
ABELL AND HOWE	2 TON JIB CRANE	ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST	🔒 Subscribe
MITUTOYO	MN 201-152, MN 201-153, MN 201-154, MN 201-156	MITUTOYO MN 201-152, MN 201-153, MN 201-154, MN 201-156 DIAL SNAP GAUGES. INCLUDES (3) 1-2 INCH MN 201-152, (1) 2-3 INCH MN 201-153, (1) 3-4 INCH MN 201-154, AND (1) 5-6 INCH MN 201-156	🔒 Subscribe
		LOT OF (7) WALL MOUNTED INDUSTRIAL FANS	🔒 Subscribe
GULF HARMONY	AW68	GULF HARMONY AW68 HYDRAULIC OIL 55 GALLON DRUMS	🔒 Subscribe
GORBEL	2 TON JIB CRANE	GORBEL 2 TON JIB CRANE, 18 FOOT BEAM MOUNTED WITH COFFING JLC 2 TON ELECTRIC HOIST	🔒 Subscribe
JUST RITE		JUST RITE FLAMMABLE LIQUIDS STORAGE CABINET	🔒 Subscribe
CRAFTSMAN	65418	CRAFTSMAN 65418 ROLLING TOOL CABINET WITH CONTENTS, 27 IN. X 18 IN. X 42 IN.(H)	🔒 Subscribe
GORBEL	1/2 TON JIB CRANE	GORBEL 1/2 TON JIB CRANE, 8 FOOT BEAM MOUNTED WITH BUDGIT 2 TON ELECTRIC HOIST	🔒 Subscribe
PAC	PSM 1412-IC3	PAC PSM 1412-IC3 ELECTRIC STRAPPING TABLE, PORTABLE ON WHEELS, 1 PH	🔒 Subscribe
TOLEDO	HONEST WEIGHT	TOLEDO HONEST WEIGHT PORTABLE PLATFORM SCALE, 500 LB CAPACITY	🔒 Subscribe
WILKERSON		WILKERSON REGULATORS, ASHCROFT GAUGES, ASCO RED HAT VALVES	🔒 Subscribe
MAHR FEDERAL	POCKET SURF III	MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR	🔒 Subscribe
ASTROLINE	10 TON TRUCK HYDRAULIC FLOOR JACK	ASTROLINE 10 TON TRUCK HYDRAULIC FLOOR JACK	🔒 Subscribe
MAKITA		MAKITA ELECTRIC SHEAR	🔒 Subscribe

INNOCENTI ZR23-25 SENDZIMIR 20HI

METALWORKING & FABRICATION EQUIPMENT

INNOCENTI ZR23-25 SENDZIMIR 20HI ROLLING MILL, MAX WIDTH: 635 MM (25 IN.), MIN WIDTH: 318 MM (12.5 ...

Hammer Price: 🔒

CINCINNATI MILACRON

METALWORKING & FABRICATION EQUIPMENT

CINCINNATI MILACRON ROLL GRINDER WITH SINE BAR, 16 IN. SWING X 48 IN. BETWEEN CENTERS, FANUC SPINDLE...

Hammer Price: 🔒

UPTON

MISC

UPTON CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 6 FT. X 6 FT. X 12 FT. DEEP ID, RADIANT TUB...

Hammer Price: 🔒

HYSTER S60FT

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HYSTER S60FT FORKLIFT, 6000 LB CAPACITY, 181 INCH LIFT HEIGHT, 3 STAGE MAST, SIDE SHIFT, ROPS, SOLID...

Hammer Price: 🔒

INDUSTRONICS

SURFACE FINISHING EQUIPMENT

INDUSTRONICS CAR BOTTOM ANNEALING FURNACE, NITROGEN ATMOSPHERE, 11 FT. X 8 FT. X 18 FT. DEEP ID, RAD...

Hammer Price: 🔒

LOOPCO/YODER LOOP SLITTING LINE

METALWORKING & FABRICATION EQUIPMENT

LOOPCO/YODER LOOP SLITTING LINE, THICKNESS RANGE - .125 IN.- 0.015 IN., MAX COIL WEIGHT - 20,000, - ...

Hammer Price: 🔒

MISC

STRIP LINE HYDRAULIC COIL UP-ENDER, 12,500 LB CAPACITY...

Hammer Price: 🔒

NATIONAL 58 INCH X 1/4 INCH CAPACITY

METALWORKING & FABRICATION EQUIPMENT

NATIONAL 58 INCH X 1/4 INCH CAPACITY SOFT METAL SHEAR, WITH FOOT PEDAL CONTROL, 3 PHASE...

Hammer Price: 🔒

CLARY

PACKAGING EQUIPMENT

CLARY PALLET SHRINK WRAPPER, 6 FT ROTARY TABLE, 3 PHASE...

Hammer Price: 🔒

DEMPSTER BROTHERS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

DEMPSTER BROTHERS METAL BALER, 22 INCH X 18 INCH X 58 INCH BALES, 3 PHASE...

Hammer Price: 🔒

RAYMOND MN 60-C50TT

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

RAYMOND MN 60-C50TT STAND UP 36 VOLT ELECTRIC FORKLIFT, 5000 LB CAPACITY, 178 INCH MAX LIFT HEIGHT, ...

Hammer Price: 🔒

MISC

12 IN. - 20 IN. DIAMETER X 24 IN. CORE CUTTER...

Hammer Price: 🔒

INGERSOLL RAND IRN30H-CC HV

AIR COMPRESSORS

INGERSOLL RAND IRN30H-CC HV AIR COMPRESSOR S/N: CBV115528...

Hammer Price: 🔒

MISC

FLAT COIL ANNEALING TRAYS CONSISTING OF (5) SMALL FLAT RACK, 34 IN. X 60 IN., AND (4) LARGE FLAT RAC...

Hammer Price: 🔒

WILTON 7020

METALWORKING & FABRICATION EQUIPMENT

WILTON 7020 17 INCH THROAT HORIZONTAL METAL CUTTING BANDSAW, 1750 RPM, 1 1/2 HP, WITH (2) STANDS...

Hammer Price: 🔒

TISHKEN PULL-THRU SLITTING LINE

MISC

TISHKEN PULL-THRU SLITTING LINE, MAX WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 IN., MAX WE...

Hammer Price: 🔒

MAHR FEDERAL POCKET SURF III

TEST, MEASUREMENT & QUALITY EQUIPMENT

MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER...

Hammer Price: 🔒

INDUSTRONICS

SURFACE FINISHING EQUIPMENT

INDUSTRONICS ROLL IN BED ANNEALING FURNACE, NITROGEN ATMOSPHERE, 40 IN. X 62 IN. X 28 IN. ID, 37 IN....

Hammer Price: 🔒

ORGAPAC OR-T 200

MISC

ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STA...

Hammer Price: 🔒

BUSHMAN 3 1/2 TON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BUSHMAN 3 1/2 TON BELOW HOOK LIFTING CLAMP...

Hammer Price: 🔒

INGERSOLL-RAND SSR-EP15U

AIR COMPRESSORS

INGERSOLL-RAND SSR-EP15U ROTARY SCREW AIR COMPRESSOR, 15 HP, 3PH S/N: J4739U93257...

Hammer Price: 🔒

RICELAKE 420

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

48 INCH X 72 INCH PLATFORM SCALE WITH RICELAKE 420 DIGITAL READOUT, 10,000 LB CAPACITY...

Hammer Price: 🔒

BALDOR 50 HP

ELECTRICAL AND POWER GENERATION EQUIPMENT

BALDOR 50 HP AC DRIVE MOTOR, 1775 RPM, 230/460 VOLT, 325T FRAME...

Hammer Price: 🔒

ABELL AND HOWE 2 TON JIB CRANE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST...

Hammer Price: 🔒

WATERBURY FARREL

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 24 IN., THICKNESS RANGE - 0.006 IN.- 0.090 IN....

Hammer Price: 🔒

WATERBURY FARREL PULL-THRU SLITTING LINE

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FARREL PULL-THRU SLITTING LINE, MAX. WIDTH - 20 IN., THICKNESS RANGE - 0.006 IN. - 0.050 I...

Hammer Price: 🔒

POWER SURVEY BLR-CM

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

POWER SURVEY BLR-CM POWER FACTOR CONTROL RELAY...

Hammer Price: 🔒

DIAGNOSTIC INSTRUMENTS DI-2200

TEST, MEASUREMENT & QUALITY EQUIPMENT

DIAGNOSTIC INSTRUMENTS DI-2200 REAL TIME FFT ANALYZER...

Hammer Price: 🔒

MISC

LOT OF (12) SUSPENDED COIL ANNEALING STANDS...

Hammer Price: 🔒

GE TPVVF5616

ELECTRICAL AND POWER GENERATION EQUIPMENT

GE TPVVF5616 INSULATED CIRCUIT BREAKER UNIT...

Hammer Price: 🔒

WATERBURY FARREL

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FARREL PULL-THRU SLITTING LINE, MAX WIDTH - 9.5 IN., THICKNESS RANGE - 0.006 IN.- 0.050 IN...

Hammer Price: 🔒

ORGAPAC OR-T 200

POWER AND HAND TOOLS

ORGAPAC OR-T 200 SEMI AUTOMATIC COMBINATION CORDLESS STRAPPING TOOL, WITH BATTERIES AND CHARGING STA...

Hammer Price: 🔒

KONE, YALE 3 TON ELECTRIC HOIST, 3 TON ELECTRIC HOIST

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

OVERHEAD CRANE SYSTEM WITH (2) CRANES TO INCLUDE, 28 FEET WIDE X 24 FEET LONG X 144 INCH HIGH STEEL ...

Hammer Price: 🔒

CUB CADET LTX1045

EARTH MOVING EQUIPMENT

CUB CADET LTX1045 HYDROSTATIC RIDING LAWNMOWER WITH BAG CATCHER (NEEDS NEW BATTERY AND FLUID CHANGE,...

Hammer Price: 🔒

ABELL AND HOWE 2 TON JIB CRANE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ABELL AND HOWE 2 TON JIB CRANE, 20 FOOT BEAM MOUNTED WITH CM LODESTAR 2 TON ELECTRIC HOIST...

Hammer Price: 🔒

MITUTOYO MN 201-152, MN 201-153, MN 201-154, MN 201-156

TEST, MEASUREMENT & QUALITY EQUIPMENT

MITUTOYO MN 201-152, MN 201-153, MN 201-154, MN 201-156 DIAL SNAP GAUGES. INCLUDES (3) 1-2 INCH MN 2...

Hammer Price: 🔒

MISC

LOT OF (7) WALL MOUNTED INDUSTRIAL FANS...

Hammer Price: 🔒

GULF HARMONY AW68

MISC

GULF HARMONY AW68 HYDRAULIC OIL 55 GALLON DRUMS...

Hammer Price: 🔒

GORBEL 2 TON JIB CRANE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

GORBEL 2 TON JIB CRANE, 18 FOOT BEAM MOUNTED WITH COFFING JLC 2 TON ELECTRIC HOIST...

Hammer Price: 🔒

JUST RITE

MISC

JUST RITE FLAMMABLE LIQUIDS STORAGE CABINET...

Hammer Price: 🔒

CRAFTSMAN 65418

MISC

CRAFTSMAN 65418 ROLLING TOOL CABINET WITH CONTENTS, 27 IN. X 18 IN. X 42 IN.(H)...

Hammer Price: 🔒

GORBEL 1/2 TON JIB CRANE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

GORBEL 1/2 TON JIB CRANE, 8 FOOT BEAM MOUNTED WITH BUDGIT 2 TON ELECTRIC HOIST...

Hammer Price: 🔒

PAC PSM 1412-IC3

PACKAGING EQUIPMENT

PAC PSM 1412-IC3 ELECTRIC STRAPPING TABLE, PORTABLE ON WHEELS, 1 PH...

Hammer Price: 🔒

TOLEDO HONEST WEIGHT

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOLEDO HONEST WEIGHT PORTABLE PLATFORM SCALE, 500 LB CAPACITY...

Hammer Price: 🔒

WILKERSON

MISC

WILKERSON REGULATORS, ASHCROFT GAUGES, ASCO RED HAT VALVES...

Hammer Price: 🔒

MAHR FEDERAL POCKET SURF III

TEST, MEASUREMENT & QUALITY EQUIPMENT

MAHR FEDERAL POCKET SURF III ROUGHNESS TESTER...

Hammer Price: 🔒

MAKITA

POWER AND HAND TOOLS

MAKITA ELECTRIC SHEAR...

Hammer Price: 🔒

MAKITA

POWER AND HAND TOOLS

MAKITA ELECTRIC SHEAR...

Hammer Price: 🔒

ASTROLINE 10 TON TRUCK HYDRAULIC FLOOR JACK

AUTOMOTIVE REPAIR

ASTROLINE 10 TON TRUCK HYDRAULIC FLOOR JACK...

Hammer Price: 🔒

MAKITA

POWER AND HAND TOOLS

MAKITA ELECTRIC SHEAR...

Hammer Price: 🔒

1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Erickson Metals Corporation Aluminum Cold Rolling and Slitting Facility

Save to Project Folder

Print Options

Save to Project Folder