Major Processing Packaging Equipment Liquidation CarterWilson Aevos

TCL Asset Group Inc.

Category: MISC

Total Lots: 255

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 151–200 of 255 lots

Year	Make	Model	Lot Description	Hammer Price
	UNI-PHARMA	AUTOMATIC LABELER	UNI-PHARMA AUTOMATIC LABELER, POWER SUPPLY : 120V 1PH 60HZ 6AMPS, MAXIMUM LABEL HEIGHT : 6.25 INCH, MAXIMUM LABEL LENGHT : 12 INCH, MAXIMUM BOTTLE DIAMETER : 5 INCH, WORKWAY : FROM RIGHT TO LEFT, INNER DIAMETER OF THE LABEL ROLL CORE : 3 INCH (76MM), MAXIMUM OUTSIDE DIAMETER OF THE LABEL ROLL : 14 INCH, APPLICABLE LABEL UNWIND DIRECTION - OUTER POSITION RIGHT SIDE FIRST, CONVEYOR DIMENSIONS (W X L) : 4 INCH X 72 INCH, FLOOR - TOP OF CONVEYOR BELT HEIGHT : 36 INCH, OVERALL DIMENSIONS (L X W X H) : 75 INCH X 44 INCH X 72 INCH, WEIGHT : 450LBS UNI-PHARMA · AUTOMATIC LABELER	🔒 Subscribe
	MARKEM-IMAJE	9030	MARKEM-IMAJE 9030 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINTER, PRINTING CAPABILITY: UP TO 8 LINES OF PRINT, PRINT SPEED: UP TO 5.5 M/S (18 FT/S), PRINT RESOLUTION: 71 DPI (G HEAD), 115 DPI (M HEAD), CHARACTER HEIGHT: 1.2 MM TO 18.2 MM MARKEM-IMAJE · 9030	🔒 Subscribe
	LEE INDUSTRIES INC.	20A	STAINLESS STEEL TANK LEE INDUSTRIES INC. · 20A	🔒 Subscribe
			BELT CONVEYOR, POWER REQUIREMENTS: 90 VOLT DC, OUTPUT RPM: 42 APPROX., CLEATED BELT DIMENSIONS: 6 INCH WIDE X 70 INCH LONG, CLEAT DEPTH: 1.5 INCH, STAINLESS STEEL FEED HOPPER: 34 INCH X 30 INCH X 18 INCH DEEP, INFEED HEIGHT: 42 INCH, DISCHARGE HEIGHT: 60 INCH APPROX, WITH DISCHARGE CHUTE, MOUNTED STAINLESS STEEL FRAME WITH CASTERS, SHIPPING INFORMATION: 48 INCH WIDE X 80 INCH LONG X 90 INCH HIGH 750 LBS	🔒 Subscribe
	BUHLER	USE 28/30	BUHLER ROTARY AIR LOCK VALVE, MODEL: USE 28/30, 8.5 TO 10.5 INCH, HOUSING & BLADE MATERIAL: STAINLESS STEEL, VALVE ONLY, NO MOTOR BUHLER · USE 28/30	🔒 Subscribe
	SEEPEX		SEEPEX PROGRESSIVE CAVITY PUMP, INLET & OUTLET: 1.5 INCH NPT, MOTOR: 575 VOLT, 1750 RPM, REDUCER RATIO: 4.22/1, FINAL OUTPUT RPM: 415 APPROX., CHAMBER LENGTH: 13.5 INCH, CARBON STEEL CONTACT PARTS, SHOP TESTED 575 VOLT SEEPEX	🔒 Subscribe
	LINDBERG / BLUE M	GO1310SA-1	LINDBERG / BLUE M GRAVITY OVEN, MOD. GO1310SA-1, TEMPERATURE RANGE: 40C TO 260C, POWER REQUIREMENTS: 120 VOLT LINDBERG / BLUE M · GO1310SA-1	🔒 Subscribe
	GOULDS	ESHC 3X4X8 4P PM	GOULDS CENTRIFUGAL PUMP, MOD. ESHC 3X4X8 4P PM, CATALOG NUMBER: 03SH08A10T4H2, INLET & OUTLET: 4 IN. X 3 IN., FLANGE FITTINGS: 9 IN. X 8 IN. , IMPELLER DIAMETER 9.063 IN, 316 STAINLESS STEEL CONTACT PARTS, MOTOR: 10 HP, 575 VOLT, 1760 RPM GOULDS · ESHC 3X4X8 4P PM	🔒 Subscribe
			ROTARY AIR LOCK VALVE, INLET & OUTLET : 8-INCH , XP MOTOR: 0.75 HP, 575 VOLT, WITH STAINLESS STEEL LUMP BREAKER	🔒 Subscribe
	GRACO	PRESIDENT	GRACO PRESIDENT DRUM PUMP, SERIES F10A, MAX FLOW RATE: 3 GPM, MOUNTED ON CART GRACO · PRESIDENT	🔒 Subscribe
	MARKEM-IMAJE	9030 IP65	MARKEM-IMAJE 9030 IP65 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINTER, PRINTING CAPABILITY: UP TO 8 LINES OF PRINT, PRINT SPEED: UP TO 5.5 M/S (18 FT/S), PRINT RESOLUTION: 71 DPI (G HEAD), 115 DPI (M HEAD), CHARACTER HEIGHT: 1.2 MM TO 18.2 MM MARKEM-IMAJE · 9030 IP65	🔒 Subscribe
			TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BOTTOM, CENTER DISCHARGE: 3 INCH TRI CLAMP, FOUR (4) STAINLESS STEEL MIXING BAFFLES INSIDE, TANK IS ON FOUR STAINLESS STEEL LEGS WITH PADS, OVERALL HEIGHT: 74 INCH	🔒 Subscribe
			ROTATING DRUM TUMBLER, INTERIOR DIMENSIONS: 76 INCH DIAMETER X 60 INCH DEEP, WITH BAFFLES, OPENING: 36 INCH WITH COVER, WITH CONTROL BOX WITH TUMBLER & SCREW CONVEYOR, MOTOR: 10 HP, 575 VOLT, TUMBLER WEIGHT EMPTY: 8000 LBS APPROX., CONTACT PARTS : STAINLESS STEEL, WITH STAINLESS STEEL SCREW CONVEYOR, POLYPROPYLENE SCREW: 8 INCH DIAMETER X 68INCH LONG, MOUNTED ON A STAINLESS STEEL FRAME WITH CASTERS, DISCHARGE: 9 INCH , INFEED SECTION: 45 INCH LONG, 115 VOLT MOTOR	🔒 Subscribe
	CLEAVLAND RANGE	TMKDL 150T	300 GALLON CLEAVLAND RANGE TANK, MOD. TMKDL 150T, DIRECT STEAM MODEL, CENTER DISCHARGE: 3 IN. TRI CLAMP, INTERIOR DIMENSIONS: 40 IN. DIAMETER X 36 IN. DEEP, BUILT IN AGITATOR SYSTEM (REQUIRES ANCHOR), POWER TILTING MECHANISM. JACKET PRESSURE RATING: 35 PSI AT 281 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 21895 & 21896, CRN NO. H6466.56 CLEAVLAND RANGE · TMKDL 150T	🔒 Subscribe
			TANK, 350 GALLON, DIMENSIONS: 45.5 INCH DIAMETER X 48 INCH STRAIGHT SIDE, PLUS CONE BOTTOM, CENTER DISCHARGE: 2 INCH, REDUCED TO 1 INCH WITH BALL VALVES, TOP MANWAY WITH LID: 19 INCH, WITH INTEGRATED FORKLIFT TUBES, OVERALL HEIGHT: 100 INCH, SHIPPING INFORMATION: 48 INCH WIDE X 48 INCH LONG X 107 INCH HIGH AT 1500 LBS	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH WALKER TANK	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH WALKER TANK	🔒 Subscribe
	CHESTER JENSEN	X70N50	20 GALLON CHESTER JENSEN TANK, MOD. X70N50, CENTER DISCHARGE: 4 INCH REDUCED TO 2 INCH TRI CLAMP (WITH VALVE), WITH TOP ENTRY SCRAPE AGITATOR, MOTOR: 5 HP, 230/460 VOLT, 100 RPM APPROX., WITH STAINLESS STEEL CONTROL PANEL, WITH VARIABLE SPEED DRIVE, ADDITIONAL PORT FOR SECONDARY MIXER CHESTER JENSEN · X70N50	🔒 Subscribe
	SYNTRON	FT01	SYNTRON VIBRATORY MAGNETIC FEEDERS, MOD. FT01, WITH TWO SYNTRON MAGNETIC FEEDERS, 115 VOLT, WITH NUCON VACUUM SYSTEM, WITH CONTROL PANEL, MOUNTED ON A CARBON STEEL FRAME, PREVIOUS USE: INDUSTRIAL APPLICATION SYNTRON · FT01	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO 1 INCH END DISCHARGE, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH WALKER TANK	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS FRISTAM	🔒 Subscribe
			BELT CONVEYOR, POWER SUPPLY : 120V 1PH 2.5AMPS, CONVEYOR BELT TYPE : URETHANE, BELT DIMENSIONS (L X W) : 203'' X 12'', SPEED : VARIABLE : 10'/MINUTE - 116'/MINUTE, BELT HEIGHT : 38.375'', FRAME : STAINLESS STEEL, GUIDE RAILS : STEEL ANGLE ON 1 SIDE : 155'LENGHT X 1.5'' HEIGHT, SUPPORT TYPE : CASTERS (NON-ADJUSTABLE), OVERALL DIMENSIONS (L X W X H) : 203'' X 23'' X 42''	🔒 Subscribe
			SEMI-AUTOMATIC PISTON FILLER, 240V 1PH 60HZ 20A, 90 PSI, 10 - 100 ML, OVERALL DIMENSIONS (L X W XH) : 35 X 21 X 44	🔒 Subscribe
	HUALIAN	FXJ-5050ZBR	2000 HUALIAN FXJ-5050ZBR HOT MELT GLUE CASE/BOX SEALER, 240V 1PH 60HZ 6A, 90 PSI, OVERALL DIMENSIONS (L X W X H) : 84 INCH X 42 INCH X 62 INCH HUALIAN · FXJ-5050ZBR	🔒 Subscribe
	ONEIDA AIR SYSTEMS	MINI-GORILLA	1.5HP PORTABLE DUST COLLECTOR : 28 INCH X 24.75 INCH X 64.25 INCH ONEIDA AIR SYSTEMS · MINI-GORILLA	🔒 Subscribe
			CONVEYOR WITH REJECT STATION, POWER SUPPLY : 120V 1PH 6A, AIR SUPPLY : 1 CFM @ 60-100 PSI, MOTOR TYPE : DC, MOTOR POWER : 0.5 HP, CONVEYOR BELT TYPE : TABLETOP LF ACETAL, BELT DIMENSIONS (L X W) : 20 INCH X 12 INCH, DIMENSIONS OF THE REJECTION ZONE : 18 INCH X 14 INCH, SPEED : ADJUSTABLE : 0' - 105'/MINUTE, BELT HEIGHT : 34 INCH - 38 INCH (ADJUSTABLE), FRAME : STAINLESS STEEL, SUPPORT TYPE : LEVELING MOUNTS / MOUNTING BRACKETS WITH ANCHOR BOLTS, OVERALL DIMENSIONS (L X W X H) : 40 INCH X 28 INCH X 48 INCH, WEIGHT : 350 LBS	🔒 Subscribe
			ELEVATING SCREW CONVEYOR, 600V 3PH 60HZ 5.3A, DISCHARGE HEIGHT : 86 INCH, OVERALL DIMENSIONS (L X W X H) : 180 INCH X 40 INCH X 140 INCH	🔒 Subscribe
	GROEN	PT 40 SP	GROEN PT 40 SP. - STAINESS STEEL JACKETED TANK GROEN · PT 40 SP	🔒 Subscribe
	KALIX-DUPUY	K X 00 2889	KALIX-DUPUY K X 00 2889 - TUBE FILLER KALIX-DUPUY · K X 00 2889	🔒 Subscribe
	ALLCHAMP	A368-L	SEMI-AUTOMATIC PIE CRUST PRESSING MACHINE, POWER SUPPLY : 240V 1PH 6AMPS, AIR SUPPLY : 2 CFM @ 100 PSI, PRODUCTION SPEED : UP TO 900 PIE SHELLS PER HOUR, MOULD DIAMETER : 7.5 INCH, MOULD DEPTH : 1 INCH, OVERALL DIMENSIONS (L X W X H) : 27 INCH X 14.5 INCH X 37 INCH, WEIGHT : 120 LBS ALLCHAMP · A368-L	🔒 Subscribe
	MARKEM-IMAJE	9020	MARKEM-IMAJE 9020 INKJET PRINTER, TECHNOLOGY: CONTINUOUS INKJET (CIJ), APPLICATION: CODING ON PACKAGING (FOOD, BEVERAGE, PHARMA, COSMETICS), CABINET: STAINLESS STEEL, PRINT SPEED: UP TO 4.4 M/S, CHARACTER HEIGHT: 1.8 TO 8.7 MM, FONT SIZE: 5 TO 24 DOTS, POWER SUPPLY: 100-120 V OR 200-240 V (AUTO-SWITCHING), 50/60 HZ, ~60 VA MARKEM-IMAJE · 9020	🔒 Subscribe
	JDA	PROGRESS	JDA PROGRESS SEMI-AUTOMATIC CAPPER JDA · PROGRESS	🔒 Subscribe
	MESA LABS	SURETORQUE S3 LAB	MESA LABS SURETORQUE S3 LAB CAP TORQUE TESTER, POWER SUPPLY : 120V 1PH 60HZ 4AMPS, AIR SUPPLY : 80 PSI @ 4 CFM, TORQUE RANGE : 0 - 88 LBFIN, SPEED RANGE : 0RPM - 60RPM, APPLICABLE CONTAINER HEIGHT : 4'' - 31'', INCLUDES TOOLING FOR CYLINDRICAL CONTAINERS : 1.25'' / 1.5'' / 1.75'' / 2'' / 2.25'' / 2.5'' / 3'' / 4'', INCLUDES TOOLING FOR RECTANGULAR CONTAINERS : 1.25'' X 1.5'', INCLUDES TOOLING FOR CAPS : 28MM / 32MM / 38MM / 52MM / 88MM, OVERALL DIMENSIONS (L X W X H) : 20'' X 12'' X 29'', WEIGHT : 86 LBS S/N: S748 MESA LABS · SURETORQUE S3 LAB	🔒 Subscribe
	LABEL SYSTEMS	LS 100 80	TOP AND FRONT SECURITY SEAL LABELER LABEL SYSTEMS · LS 100 80	🔒 Subscribe
			EGGPLANT M/C - FRUIT AND VEGETABLE CUTTING MACHINE	🔒 Subscribe
			KETTLE, 100 GALLON, INTERIOR DIMENSIONS: 45 INCH DIAMETER X 26 INCH DEEP, WITH BRACKET FOR CLAMP ON MIXER, CENTER DISCHARGE, OPEN TOP WITH LID, TOP LID OPENING: 6 INCH, JACKET HAS BEEN PRESSURE TESTED, SHIPPING DIMENSIONS: 48 INCH WIDE X 52 INCH LONG X 61 INCH HIGH AT 350LBS	🔒 Subscribe
			TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BOTTOM, CENTER DISCHARGE: 3 INCH TRI CLAMP, FOUR (4) STAINLESS STEEL MIXING BAFFLES INSIDE, TANK IS ON FOUR STAINLESS STEEL LEGS WITH PADS, OVERALL HEIGHT: 74 INCH	🔒 Subscribe
	CROWN FOOD SERVICE	DC 12	12 GALLON TITLING KETTLE, CROWN FOOD SERVICE, DC 12, JACKET RATED 50 PSI AT 298 DEG F, WITH NATIONAL BOARD AND CRN NUMBERS, DIMENSIONS 16-INCH DIAMETER X 17-INCH DEEP, PREVIOUS USE COSMETICS. CROWN FOOD SERVICE · DC 12	🔒 Subscribe
			TANK (HOPPER), 20 GALLON, STAINLESS STEEL, INTERIOR DIMENSIONS: 24 INCH DIAMETER X 6 INCH STRAIGHT SIDE, PLUS 18 INCH CONE BOTTOM, DISCHARGE: 2 INCH TRI CLAMP, OVERALL HEIGHT: 38 INCH, DISTANCE FROM DISCHARGE TO FLOOR: 10 INCH	🔒 Subscribe
			TANK (HOPPER), 2250 GALLON (300 CU.FT.) WITH BLENDER & ROTARY VALVE, CARBON STEEL, RECEIVING HOPPER INTERIOR DIMENSIONS: 92 INCH DIAMETER X 88 INCH DEEP, PRODUCT INLET: 5 INCH, HOPPER EQUIPPED WITH CARBON STEEL BLENDER, WITH CARBON STEEL ROTARY VALVE, POWER REQUIREMENTS: 575 VOLT, WITH TWO SEMCO IMPACTORS, HOPPER HAS LOAD CELLS (NO CONTROLS), OVERALL DIMENSIONS: 123 INCH X 126 INCH X 183 INCH HIGH	🔒 Subscribe
			JACKETED TANK, 5 GALLON, JACKET RATED: 45 PSI AT 650 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 4489, DIMENSIONS: 12 INCH DIAMETER X 12 INCH DEEP, OPEN TOP WITH LID, OVERALL HEIGHT: 40 INCH	🔒 Subscribe
2014		DC 12	2014 TILTING KETTLE, 12 GALLON, STAINLESS STEEL, JACKET PRESSURE RATING: 50 PSI @ 298 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 64713, CRN NO. OH2431.58, DIMENSIONS: 16 INCH DIAMETER X 18 INCH DEEP, TILTING KETTLE WITH HANDLE, KETTLE MOUNTED ON A STAINLESS STEEL STAND, S/N: 2014 · DC 12	🔒 Subscribe
			JACKETED TANK, 13 GALLON, DIMENSIONS: 17 INCH DIAMETER X 24 INCH DEEP, OPEN TOP, DISH BOTTOM, WITH LID, 1.5 INCH CENTER DISCHARGE, TRI CLAMP FITTING, TANK HAS BRACKET TO MOUNT A MIXER, TANK IS ON THREE STAINLESS STEEL LEGS WITH CASTERS, COMES WITH TWO BALL VALVES FOR JACKET PIPING, OVERALL HEIGHT: 46 INCH	🔒 Subscribe
			TANK, 30 GALLON, INTERIOR DIMENSIONS: 30 INCH DIAMETER X 25 INCH STRAIGHT SIDE, DISH BOTTOM, TANK HAS A SCREEN WELDED 11.5 INCH FROM THE TOP, CENTER DISCHARGE: 1.5 INCH TRI CLAMP WITH VALVE, BOTTOM PORTS: TWO 4 INCH TRI CLAMP, OPEN TOP, MOUNTED ONTO STAINLESS STEEL FRAME WITH CASTERS, SHIPPING DIMENSIONS: 48 INCH X 48 INCH X 52 INCH, 500 LBS	🔒 Subscribe
			TANK, 75 GALLON DIMENSIONS: 24 INCH DIAMETER X 38 INCH STRAIGHT SIDE, OPEN TOP, NO LID, TOP OPENING: 16 INCH DIAMETER, OFF CENTERED CONE DISCHARGE: 2 INCH WITH BUTTERFLY VALVE, WITH GRAB HANDLES, ON CASTERS, OVERALL HEIGHT WITH CASTERS: 49 INCH.	🔒 Subscribe
	FELDMEIER		FELDMEIER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP (NO LID), WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH FELDMEIER	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 INCH X 2.5 INCH TRI CLAMP, MOTOR: 7.5 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS FRISTAM	🔒 Subscribe
			BELT CONVEYOR, BELT DIMENSIONS: 13 INCH WIDE X 115 INCH LONG, FOOD GRADE PLASTIC BELT WITH CLEATS, DISCHARGE HEIGHT: 68 INCH, STAINLESS STEEL DRUM MOTOR: 0.75 HP, 460 VOLT, VARIABLE SPEED, WITH ALLEN BRADLEY VARIABLE FREQUENCY DRIVE, WITH QUICK 480 VOLT CONNECT PLUG, WITH FOOT SWITCH, STAINLESS STEEL FRAME MOUNTED ON CASTERS, WITH ADJUSTABLE LEGS	🔒 Subscribe
			BELT CONVEYOR, BELT DIMENSIONS: 7.5 INCH WIDE X 38 INCH LONG, CHARGE / DISCHARGE HEIGHT: 30 INCH HIGH, MOTOR: 120 VOLT, WITH VARIABLE SPEED MOTOR CONTROLLER, STAINLESS STEEL FRAME	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS FRISTAM	🔒 Subscribe

Year	Make	Model	Description	Price
	UNI-PHARMA	AUTOMATIC LABELER	UNI-PHARMA AUTOMATIC LABELER, POWER SUPPLY : 120V 1PH 60HZ 6AMPS, MAXIMUM LABEL HEIGHT : 6.25 INCH, MAXIMUM LABEL LENGHT : 12 INCH, MAXIMUM BOTTLE DIAMETER : 5 INCH, WORKWAY : FROM RIGHT TO LEFT, INNER DIAMETER OF THE LABEL ROLL CORE : 3 INCH (76MM), MAXIMUM OUTSIDE DIAMETER OF THE LABEL ROLL : 14 INCH, APPLICABLE LABEL UNWIND DIRECTION - OUTER POSITION RIGHT SIDE FIRST, CONVEYOR DIMENSIONS (W X L) : 4 INCH X 72 INCH, FLOOR - TOP OF CONVEYOR BELT HEIGHT : 36 INCH, OVERALL DIMENSIONS (L X W X H) : 75 INCH X 44 INCH X 72 INCH, WEIGHT : 450LBS	🔒 Subscribe
	MARKEM-IMAJE	9030	MARKEM-IMAJE 9030 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINTER, PRINTING CAPABILITY: UP TO 8 LINES OF PRINT, PRINT SPEED: UP TO 5.5 M/S (18 FT/S), PRINT RESOLUTION: 71 DPI (G HEAD), 115 DPI (M HEAD), CHARACTER HEIGHT: 1.2 MM TO 18.2 MM	🔒 Subscribe
	LEE INDUSTRIES INC.	20A	STAINLESS STEEL TANK	🔒 Subscribe
			BELT CONVEYOR, POWER REQUIREMENTS: 90 VOLT DC, OUTPUT RPM: 42 APPROX., CLEATED BELT DIMENSIONS: 6 INCH WIDE X 70 INCH LONG, CLEAT DEPTH: 1.5 INCH, STAINLESS STEEL FEED HOPPER: 34 INCH X 30 INCH X 18 INCH DEEP, INFEED HEIGHT: 42 INCH, DISCHARGE HEIGHT: 60 INCH APPROX, WITH DISCHARGE CHUTE, MOUNTED STAINLESS STEEL FRAME WITH CASTERS, SHIPPING INFORMATION: 48 INCH WIDE X 80 INCH LONG X 90 INCH HIGH 750 LBS	🔒 Subscribe
	BUHLER	USE 28/30	BUHLER ROTARY AIR LOCK VALVE, MODEL: USE 28/30, 8.5 TO 10.5 INCH, HOUSING & BLADE MATERIAL: STAINLESS STEEL, VALVE ONLY, NO MOTOR	🔒 Subscribe
	SEEPEX		SEEPEX PROGRESSIVE CAVITY PUMP, INLET & OUTLET: 1.5 INCH NPT, MOTOR: 575 VOLT, 1750 RPM, REDUCER RATIO: 4.22/1, FINAL OUTPUT RPM: 415 APPROX., CHAMBER LENGTH: 13.5 INCH, CARBON STEEL CONTACT PARTS, SHOP TESTED 575 VOLT	🔒 Subscribe
	LINDBERG / BLUE M	GO1310SA-1	LINDBERG / BLUE M GRAVITY OVEN, MOD. GO1310SA-1, TEMPERATURE RANGE: 40C TO 260C, POWER REQUIREMENTS: 120 VOLT	🔒 Subscribe
	GOULDS	ESHC 3X4X8 4P PM	GOULDS CENTRIFUGAL PUMP, MOD. ESHC 3X4X8 4P PM, CATALOG NUMBER: 03SH08A10T4H2, INLET & OUTLET: 4 IN. X 3 IN., FLANGE FITTINGS: 9 IN. X 8 IN. , IMPELLER DIAMETER 9.063 IN, 316 STAINLESS STEEL CONTACT PARTS, MOTOR: 10 HP, 575 VOLT, 1760 RPM	🔒 Subscribe
			ROTARY AIR LOCK VALVE, INLET & OUTLET : 8-INCH , XP MOTOR: 0.75 HP, 575 VOLT, WITH STAINLESS STEEL LUMP BREAKER	🔒 Subscribe
	GRACO	PRESIDENT	GRACO PRESIDENT DRUM PUMP, SERIES F10A, MAX FLOW RATE: 3 GPM, MOUNTED ON CART	🔒 Subscribe
	MARKEM-IMAJE	9030 IP65	MARKEM-IMAJE 9030 IP65 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINTER, PRINTING CAPABILITY: UP TO 8 LINES OF PRINT, PRINT SPEED: UP TO 5.5 M/S (18 FT/S), PRINT RESOLUTION: 71 DPI (G HEAD), 115 DPI (M HEAD), CHARACTER HEIGHT: 1.2 MM TO 18.2 MM	🔒 Subscribe
			TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BOTTOM, CENTER DISCHARGE: 3 INCH TRI CLAMP, FOUR (4) STAINLESS STEEL MIXING BAFFLES INSIDE, TANK IS ON FOUR STAINLESS STEEL LEGS WITH PADS, OVERALL HEIGHT: 74 INCH	🔒 Subscribe
			ROTATING DRUM TUMBLER, INTERIOR DIMENSIONS: 76 INCH DIAMETER X 60 INCH DEEP, WITH BAFFLES, OPENING: 36 INCH WITH COVER, WITH CONTROL BOX WITH TUMBLER & SCREW CONVEYOR, MOTOR: 10 HP, 575 VOLT, TUMBLER WEIGHT EMPTY: 8000 LBS APPROX., CONTACT PARTS : STAINLESS STEEL, WITH STAINLESS STEEL SCREW CONVEYOR, POLYPROPYLENE SCREW: 8 INCH DIAMETER X 68INCH LONG, MOUNTED ON A STAINLESS STEEL FRAME WITH CASTERS, DISCHARGE: 9 INCH , INFEED SECTION: 45 INCH LONG, 115 VOLT MOTOR	🔒 Subscribe
	CLEAVLAND RANGE	TMKDL 150T	300 GALLON CLEAVLAND RANGE TANK, MOD. TMKDL 150T, DIRECT STEAM MODEL, CENTER DISCHARGE: 3 IN. TRI CLAMP, INTERIOR DIMENSIONS: 40 IN. DIAMETER X 36 IN. DEEP, BUILT IN AGITATOR SYSTEM (REQUIRES ANCHOR), POWER TILTING MECHANISM. JACKET PRESSURE RATING: 35 PSI AT 281 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 21895 & 21896, CRN NO. H6466.56	🔒 Subscribe
			TANK, 350 GALLON, DIMENSIONS: 45.5 INCH DIAMETER X 48 INCH STRAIGHT SIDE, PLUS CONE BOTTOM, CENTER DISCHARGE: 2 INCH, REDUCED TO 1 INCH WITH BALL VALVES, TOP MANWAY WITH LID: 19 INCH, WITH INTEGRATED FORKLIFT TUBES, OVERALL HEIGHT: 100 INCH, SHIPPING INFORMATION: 48 INCH WIDE X 48 INCH LONG X 107 INCH HIGH AT 1500 LBS	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH	🔒 Subscribe
	CHESTER JENSEN	X70N50	20 GALLON CHESTER JENSEN TANK, MOD. X70N50, CENTER DISCHARGE: 4 INCH REDUCED TO 2 INCH TRI CLAMP (WITH VALVE), WITH TOP ENTRY SCRAPE AGITATOR, MOTOR: 5 HP, 230/460 VOLT, 100 RPM APPROX., WITH STAINLESS STEEL CONTROL PANEL, WITH VARIABLE SPEED DRIVE, ADDITIONAL PORT FOR SECONDARY MIXER	🔒 Subscribe
	SYNTRON	FT01	SYNTRON VIBRATORY MAGNETIC FEEDERS, MOD. FT01, WITH TWO SYNTRON MAGNETIC FEEDERS, 115 VOLT, WITH NUCON VACUUM SYSTEM, WITH CONTROL PANEL, MOUNTED ON A CARBON STEEL FRAME, PREVIOUS USE: INDUSTRIAL APPLICATION	🔒 Subscribe
	WALKER TANK		WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO 1 INCH END DISCHARGE, OPEN TOP WITH LID, WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS	🔒 Subscribe
			BELT CONVEYOR, POWER SUPPLY : 120V 1PH 2.5AMPS, CONVEYOR BELT TYPE : URETHANE, BELT DIMENSIONS (L X W) : 203'' X 12'', SPEED : VARIABLE : 10'/MINUTE - 116'/MINUTE, BELT HEIGHT : 38.375'', FRAME : STAINLESS STEEL, GUIDE RAILS : STEEL ANGLE ON 1 SIDE : 155'LENGHT X 1.5'' HEIGHT, SUPPORT TYPE : CASTERS (NON-ADJUSTABLE), OVERALL DIMENSIONS (L X W X H) : 203'' X 23'' X 42''	🔒 Subscribe
			SEMI-AUTOMATIC PISTON FILLER, 240V 1PH 60HZ 20A, 90 PSI, 10 - 100 ML, OVERALL DIMENSIONS (L X W XH) : 35 X 21 X 44	🔒 Subscribe
	HUALIAN	FXJ-5050ZBR	2000 HUALIAN FXJ-5050ZBR HOT MELT GLUE CASE/BOX SEALER, 240V 1PH 60HZ 6A, 90 PSI, OVERALL DIMENSIONS (L X W X H) : 84 INCH X 42 INCH X 62 INCH	🔒 Subscribe
	ONEIDA AIR SYSTEMS	MINI-GORILLA	1.5HP PORTABLE DUST COLLECTOR : 28 INCH X 24.75 INCH X 64.25 INCH	🔒 Subscribe
			CONVEYOR WITH REJECT STATION, POWER SUPPLY : 120V 1PH 6A, AIR SUPPLY : 1 CFM @ 60-100 PSI, MOTOR TYPE : DC, MOTOR POWER : 0.5 HP, CONVEYOR BELT TYPE : TABLETOP LF ACETAL, BELT DIMENSIONS (L X W) : 20 INCH X 12 INCH, DIMENSIONS OF THE REJECTION ZONE : 18 INCH X 14 INCH, SPEED : ADJUSTABLE : 0' - 105'/MINUTE, BELT HEIGHT : 34 INCH - 38 INCH (ADJUSTABLE), FRAME : STAINLESS STEEL, SUPPORT TYPE : LEVELING MOUNTS / MOUNTING BRACKETS WITH ANCHOR BOLTS, OVERALL DIMENSIONS (L X W X H) : 40 INCH X 28 INCH X 48 INCH, WEIGHT : 350 LBS	🔒 Subscribe
			ELEVATING SCREW CONVEYOR, 600V 3PH 60HZ 5.3A, DISCHARGE HEIGHT : 86 INCH, OVERALL DIMENSIONS (L X W X H) : 180 INCH X 40 INCH X 140 INCH	🔒 Subscribe
	GROEN	PT 40 SP	GROEN PT 40 SP. - STAINESS STEEL JACKETED TANK	🔒 Subscribe
	KALIX-DUPUY	K X 00 2889	KALIX-DUPUY K X 00 2889 - TUBE FILLER	🔒 Subscribe
	ALLCHAMP	A368-L	SEMI-AUTOMATIC PIE CRUST PRESSING MACHINE, POWER SUPPLY : 240V 1PH 6AMPS, AIR SUPPLY : 2 CFM @ 100 PSI, PRODUCTION SPEED : UP TO 900 PIE SHELLS PER HOUR, MOULD DIAMETER : 7.5 INCH, MOULD DEPTH : 1 INCH, OVERALL DIMENSIONS (L X W X H) : 27 INCH X 14.5 INCH X 37 INCH, WEIGHT : 120 LBS	🔒 Subscribe
	MARKEM-IMAJE	9020	MARKEM-IMAJE 9020 INKJET PRINTER, TECHNOLOGY: CONTINUOUS INKJET (CIJ), APPLICATION: CODING ON PACKAGING (FOOD, BEVERAGE, PHARMA, COSMETICS), CABINET: STAINLESS STEEL, PRINT SPEED: UP TO 4.4 M/S, CHARACTER HEIGHT: 1.8 TO 8.7 MM, FONT SIZE: 5 TO 24 DOTS, POWER SUPPLY: 100-120 V OR 200-240 V (AUTO-SWITCHING), 50/60 HZ, ~60 VA	🔒 Subscribe
	JDA	PROGRESS	JDA PROGRESS SEMI-AUTOMATIC CAPPER	🔒 Subscribe
	MESA LABS	SURETORQUE S3 LAB	MESA LABS SURETORQUE S3 LAB CAP TORQUE TESTER, POWER SUPPLY : 120V 1PH 60HZ 4AMPS, AIR SUPPLY : 80 PSI @ 4 CFM, TORQUE RANGE : 0 - 88 LBFIN, SPEED RANGE : 0RPM - 60RPM, APPLICABLE CONTAINER HEIGHT : 4'' - 31'', INCLUDES TOOLING FOR CYLINDRICAL CONTAINERS : 1.25'' / 1.5'' / 1.75'' / 2'' / 2.25'' / 2.5'' / 3'' / 4'', INCLUDES TOOLING FOR RECTANGULAR CONTAINERS : 1.25'' X 1.5'', INCLUDES TOOLING FOR CAPS : 28MM / 32MM / 38MM / 52MM / 88MM, OVERALL DIMENSIONS (L X W X H) : 20'' X 12'' X 29'', WEIGHT : 86 LBS S/N: S748	🔒 Subscribe
	LABEL SYSTEMS	LS 100 80	TOP AND FRONT SECURITY SEAL LABELER	🔒 Subscribe
			EGGPLANT M/C - FRUIT AND VEGETABLE CUTTING MACHINE	🔒 Subscribe
			KETTLE, 100 GALLON, INTERIOR DIMENSIONS: 45 INCH DIAMETER X 26 INCH DEEP, WITH BRACKET FOR CLAMP ON MIXER, CENTER DISCHARGE, OPEN TOP WITH LID, TOP LID OPENING: 6 INCH, JACKET HAS BEEN PRESSURE TESTED, SHIPPING DIMENSIONS: 48 INCH WIDE X 52 INCH LONG X 61 INCH HIGH AT 350LBS	🔒 Subscribe
			TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BOTTOM, CENTER DISCHARGE: 3 INCH TRI CLAMP, FOUR (4) STAINLESS STEEL MIXING BAFFLES INSIDE, TANK IS ON FOUR STAINLESS STEEL LEGS WITH PADS, OVERALL HEIGHT: 74 INCH	🔒 Subscribe
	CROWN FOOD SERVICE	DC 12	12 GALLON TITLING KETTLE, CROWN FOOD SERVICE, DC 12, JACKET RATED 50 PSI AT 298 DEG F, WITH NATIONAL BOARD AND CRN NUMBERS, DIMENSIONS 16-INCH DIAMETER X 17-INCH DEEP, PREVIOUS USE COSMETICS.	🔒 Subscribe
			TANK (HOPPER), 20 GALLON, STAINLESS STEEL, INTERIOR DIMENSIONS: 24 INCH DIAMETER X 6 INCH STRAIGHT SIDE, PLUS 18 INCH CONE BOTTOM, DISCHARGE: 2 INCH TRI CLAMP, OVERALL HEIGHT: 38 INCH, DISTANCE FROM DISCHARGE TO FLOOR: 10 INCH	🔒 Subscribe
			TANK (HOPPER), 2250 GALLON (300 CU.FT.) WITH BLENDER & ROTARY VALVE, CARBON STEEL, RECEIVING HOPPER INTERIOR DIMENSIONS: 92 INCH DIAMETER X 88 INCH DEEP, PRODUCT INLET: 5 INCH, HOPPER EQUIPPED WITH CARBON STEEL BLENDER, WITH CARBON STEEL ROTARY VALVE, POWER REQUIREMENTS: 575 VOLT, WITH TWO SEMCO IMPACTORS, HOPPER HAS LOAD CELLS (NO CONTROLS), OVERALL DIMENSIONS: 123 INCH X 126 INCH X 183 INCH HIGH	🔒 Subscribe
			JACKETED TANK, 5 GALLON, JACKET RATED: 45 PSI AT 650 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 4489, DIMENSIONS: 12 INCH DIAMETER X 12 INCH DEEP, OPEN TOP WITH LID, OVERALL HEIGHT: 40 INCH	🔒 Subscribe
2014		DC 12	2014 TILTING KETTLE, 12 GALLON, STAINLESS STEEL, JACKET PRESSURE RATING: 50 PSI @ 298 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 64713, CRN NO. OH2431.58, DIMENSIONS: 16 INCH DIAMETER X 18 INCH DEEP, TILTING KETTLE WITH HANDLE, KETTLE MOUNTED ON A STAINLESS STEEL STAND, S/N:	🔒 Subscribe
			JACKETED TANK, 13 GALLON, DIMENSIONS: 17 INCH DIAMETER X 24 INCH DEEP, OPEN TOP, DISH BOTTOM, WITH LID, 1.5 INCH CENTER DISCHARGE, TRI CLAMP FITTING, TANK HAS BRACKET TO MOUNT A MIXER, TANK IS ON THREE STAINLESS STEEL LEGS WITH CASTERS, COMES WITH TWO BALL VALVES FOR JACKET PIPING, OVERALL HEIGHT: 46 INCH	🔒 Subscribe
			TANK, 30 GALLON, INTERIOR DIMENSIONS: 30 INCH DIAMETER X 25 INCH STRAIGHT SIDE, DISH BOTTOM, TANK HAS A SCREEN WELDED 11.5 INCH FROM THE TOP, CENTER DISCHARGE: 1.5 INCH TRI CLAMP WITH VALVE, BOTTOM PORTS: TWO 4 INCH TRI CLAMP, OPEN TOP, MOUNTED ONTO STAINLESS STEEL FRAME WITH CASTERS, SHIPPING DIMENSIONS: 48 INCH X 48 INCH X 52 INCH, 500 LBS	🔒 Subscribe
			TANK, 75 GALLON DIMENSIONS: 24 INCH DIAMETER X 38 INCH STRAIGHT SIDE, OPEN TOP, NO LID, TOP OPENING: 16 INCH DIAMETER, OFF CENTERED CONE DISCHARGE: 2 INCH WITH BUTTERFLY VALVE, WITH GRAB HANDLES, ON CASTERS, OVERALL HEIGHT WITH CASTERS: 49 INCH.	🔒 Subscribe
	FELDMEIER		FELDMEIER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM TO END DISCHARGE: 1 INCH, OPEN TOP (NO LID), WITH BRACKET FOR CLAMP ON MIXER, WITH STAINLESS STEEL GRAB HANDLES, TANK MOUNTED ON LOCKING CASTERS, OVERALL HEIGHT: 49 INCH	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 INCH X 2.5 INCH TRI CLAMP, MOTOR: 7.5 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS	🔒 Subscribe
			BELT CONVEYOR, BELT DIMENSIONS: 13 INCH WIDE X 115 INCH LONG, FOOD GRADE PLASTIC BELT WITH CLEATS, DISCHARGE HEIGHT: 68 INCH, STAINLESS STEEL DRUM MOTOR: 0.75 HP, 460 VOLT, VARIABLE SPEED, WITH ALLEN BRADLEY VARIABLE FREQUENCY DRIVE, WITH QUICK 480 VOLT CONNECT PLUG, WITH FOOT SWITCH, STAINLESS STEEL FRAME MOUNTED ON CASTERS, WITH ADJUSTABLE LEGS	🔒 Subscribe
			BELT CONVEYOR, BELT DIMENSIONS: 7.5 INCH WIDE X 38 INCH LONG, CHARGE / DISCHARGE HEIGHT: 30 INCH HIGH, MOTOR: 120 VOLT, WITH VARIABLE SPEED MOTOR CONTROLLER, STAINLESS STEEL FRAME	🔒 Subscribe
	FRISTAM		FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 1760 RPM, STAINLESS STEEL CONTACT PARTS	🔒 Subscribe

UNI-PHARMA AUTOMATIC LABELER

PHARMACEUTICAL MANUFACTURING EQUIPMENT

UNI-PHARMA AUTOMATIC LABELER, POWER SUPPLY : 120V 1PH 60HZ 6AMPS, MAXIMUM LABEL HEIGHT : 6.25 INCH, ...

Hammer Price: 🔒

MARKEM-IMAJE 9030

COMMERCIAL PRINTING & BINDERY EQUIPMENT

MARKEM-IMAJE 9030 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINTER, P...

Hammer Price: 🔒

LEE INDUSTRIES INC. 20A

TANKS, PUMPS & STORAGE EQUIPMENT

STAINLESS STEEL TANK...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BELT CONVEYOR, POWER REQUIREMENTS: 90 VOLT DC, OUTPUT RPM: 42 APPROX., CLEATED BELT DIMENSIONS: 6 IN...

Hammer Price: 🔒

BUHLER USE 28/30

PHARMACEUTICAL MANUFACTURING EQUIPMENT

BUHLER ROTARY AIR LOCK VALVE, MODEL: USE 28/30, 8.5 TO 10.5 INCH, HOUSING & BLADE MATERIAL: STAINLES...

Hammer Price: 🔒

SEEPEX

PHARMACEUTICAL MANUFACTURING EQUIPMENT

SEEPEX PROGRESSIVE CAVITY PUMP, INLET & OUTLET: 1.5 INCH NPT, MOTOR: 575 VOLT, 1750 RPM, REDUCER RAT...

Hammer Price: 🔒

LINDBERG / BLUE M GO1310SA-1

PHARMACEUTICAL MANUFACTURING EQUIPMENT

LINDBERG / BLUE M GRAVITY OVEN, MOD. GO1310SA-1, TEMPERATURE RANGE: 40C TO 260C, POWER REQUIREMENTS:...

Hammer Price: 🔒

GOULDS ESHC 3X4X8 4P PM

TANKS, PUMPS & STORAGE EQUIPMENT

GOULDS CENTRIFUGAL PUMP, MOD. ESHC 3X4X8 4P PM, CATALOG NUMBER: 03SH08A10T4H2, INLET & OUTLET: 4 IN....

Hammer Price: 🔒

PHARMACEUTICAL MANUFACTURING EQUIPMENT

ROTARY AIR LOCK VALVE, INLET & OUTLET : 8-INCH , XP MOTOR: 0.75 HP, 575 VOLT, WITH STAINLESS STEEL L...

Hammer Price: 🔒

GRACO PRESIDENT

PHARMACEUTICAL MANUFACTURING EQUIPMENT

GRACO PRESIDENT DRUM PUMP, SERIES F10A, MAX FLOW RATE: 3 GPM, MOUNTED ON CART...

Hammer Price: 🔒

MARKEM-IMAJE 9030 IP65

COMMERCIAL PRINTING & BINDERY EQUIPMENT

MARKEM-IMAJE 9030 IP65 - INKJET PRINTER, PRINTER TYPE: CONTINUOUS INKJET (CIJ) SMALL CHARACTER PRINT...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BO...

Hammer Price: 🔒

PACKAGING EQUIPMENT

ROTATING DRUM TUMBLER, INTERIOR DIMENSIONS: 76 INCH DIAMETER X 60 INCH DEEP, WITH BAFFLES, OPENING: ...

Hammer Price: 🔒

CLEAVLAND RANGE TMKDL 150T

TANKS, PUMPS & STORAGE EQUIPMENT

300 GALLON CLEAVLAND RANGE TANK, MOD. TMKDL 150T, DIRECT STEAM MODEL, CENTER DISCHARGE: 3 IN. TRI CL...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK, 350 GALLON, DIMENSIONS: 45.5 INCH DIAMETER X 48 INCH STRAIGHT SIDE, PLUS CONE BOTTOM, CENTER D...

Hammer Price: 🔒

WALKER TANK

TANKS, PUMPS & STORAGE EQUIPMENT

WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM ...

Hammer Price: 🔒

WALKER TANK

TANKS, PUMPS & STORAGE EQUIPMENT

WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM ...

Hammer Price: 🔒

CHESTER JENSEN X70N50

TANKS, PUMPS & STORAGE EQUIPMENT

20 GALLON CHESTER JENSEN TANK, MOD. X70N50, CENTER DISCHARGE: 4 INCH REDUCED TO 2 INCH TRI CLAMP (WI...

Hammer Price: 🔒

SYNTRON FT01

MISC

SYNTRON VIBRATORY MAGNETIC FEEDERS, MOD. FT01, WITH TWO SYNTRON MAGNETIC FEEDERS, 115 VOLT, WITH NUC...

Hammer Price: 🔒

WALKER TANK

TANKS, PUMPS & STORAGE EQUIPMENT

WALKER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTTOM ...

Hammer Price: 🔒

FRISTAM

PHARMACEUTICAL MANUFACTURING EQUIPMENT

FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 176...

Hammer Price: 🔒

MISC

BELT CONVEYOR, POWER SUPPLY : 120V 1PH 2.5AMPS, CONVEYOR BELT TYPE : URETHANE, BELT DIMENSIONS (L X ...

Hammer Price: 🔒

PACKAGING EQUIPMENT

SEMI-AUTOMATIC PISTON FILLER, 240V 1PH 60HZ 20A, 90 PSI, 10 - 100 ML, OVERALL DIMENSIONS (L X W XH) ...

Hammer Price: 🔒

HUALIAN FXJ-5050ZBR

PACKAGING EQUIPMENT

2000 HUALIAN FXJ-5050ZBR HOT MELT GLUE CASE/BOX SEALER, 240V 1PH 60HZ 6A, 90 PSI, OVERALL DIMENSIONS...

Hammer Price: 🔒

ONEIDA AIR SYSTEMS MINI-GORILLA

DUST COLLECTION EQUIPMENT

1.5HP PORTABLE DUST COLLECTOR : 28 INCH X 24.75 INCH X 64.25 INCH...

Hammer Price: 🔒

MISC

CONVEYOR WITH REJECT STATION, POWER SUPPLY : 120V 1PH 6A, AIR SUPPLY : 1 CFM @ 60-100 PSI, MOTOR TYP...

Hammer Price: 🔒

MISC

ELEVATING SCREW CONVEYOR, 600V 3PH 60HZ 5.3A, DISCHARGE HEIGHT : 86 INCH, OVERALL DIMENSIONS (L X W ...

Hammer Price: 🔒

GROEN PT 40 SP

TANKS, PUMPS & STORAGE EQUIPMENT

GROEN PT 40 SP. - STAINESS STEEL JACKETED TANK...

Hammer Price: 🔒

KALIX-DUPUY K X 00 2889

PACKAGING EQUIPMENT

KALIX-DUPUY K X 00 2889 - TUBE FILLER...

Hammer Price: 🔒

ALLCHAMP A368-L

FOOD PROCESSING AND RESTAURANT EQUIPMENT

SEMI-AUTOMATIC PIE CRUST PRESSING MACHINE, POWER SUPPLY : 240V 1PH 6AMPS, AIR SUPPLY : 2 CFM @ 100 P...

Hammer Price: 🔒

MARKEM-IMAJE 9020

COMMERCIAL PRINTING & BINDERY EQUIPMENT

MARKEM-IMAJE 9020 INKJET PRINTER, TECHNOLOGY: CONTINUOUS INKJET (CIJ), APPLICATION: CODING ON PACKAG...

Hammer Price: 🔒

JDA PROGRESS

PACKAGING EQUIPMENT

JDA PROGRESS SEMI-AUTOMATIC CAPPER...

Hammer Price: 🔒

MESA LABS SURETORQUE S3 LAB

TEST, MEASUREMENT & QUALITY EQUIPMENT

MESA LABS SURETORQUE S3 LAB CAP TORQUE TESTER, POWER SUPPLY : 120V 1PH 60HZ 4AMPS, AIR SUPPLY : 80 P...

Hammer Price: 🔒

LABEL SYSTEMS LS 100 80

PACKAGING EQUIPMENT

TOP AND FRONT SECURITY SEAL LABELER...

Hammer Price: 🔒

MISC

EGGPLANT M/C - FRUIT AND VEGETABLE CUTTING MACHINE...

Hammer Price: 🔒

CHEMICAL PROCESSING EQUIPMENT

KETTLE, 100 GALLON, INTERIOR DIMENSIONS: 45 INCH DIAMETER X 26 INCH DEEP, WITH BRACKET FOR CLAMP ON ...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK, 275 GALLON, DIMENSIONS: 41.5 INCH DIAMETER X 46 INCH STRAIGHT SIDE, OPEN TOP TANK WITH DISH BO...

Hammer Price: 🔒

CROWN FOOD SERVICE DC 12

FOOD PROCESSING AND RESTAURANT EQUIPMENT

12 GALLON TITLING KETTLE, CROWN FOOD SERVICE, DC 12, JACKET RATED 50 PSI AT 298 DEG F, WITH NATIONAL...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK (HOPPER), 20 GALLON, STAINLESS STEEL, INTERIOR DIMENSIONS: 24 INCH DIAMETER X 6 INCH STRAIGHT S...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK (HOPPER), 2250 GALLON (300 CU.FT.) WITH BLENDER & ROTARY VALVE, CARBON STEEL, RECEIVING HOPPER ...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

JACKETED TANK, 5 GALLON, JACKET RATED: 45 PSI AT 650 DEGREE FAHRENHEIT, NATIONAL BOARD NO. 4489, DIM...

Hammer Price: 🔒

2014 DC 12

FOOD PROCESSING AND RESTAURANT EQUIPMENT

2014 TILTING KETTLE, 12 GALLON, STAINLESS STEEL, JACKET PRESSURE RATING: 50 PSI @ 298 DEGREE FAHRENH...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

JACKETED TANK, 13 GALLON, DIMENSIONS: 17 INCH DIAMETER X 24 INCH DEEP, OPEN TOP, DISH BOTTOM, WITH L...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK, 30 GALLON, INTERIOR DIMENSIONS: 30 INCH DIAMETER X 25 INCH STRAIGHT SIDE, DISH BOTTOM, TANK HA...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

TANK, 75 GALLON DIMENSIONS: 24 INCH DIAMETER X 38 INCH STRAIGHT SIDE, OPEN TOP, NO LID, TOP OPENING:...

Hammer Price: 🔒

FELDMEIER

TANKS, PUMPS & STORAGE EQUIPMENT

FELDMEIER TANK, 20 GALLON, INTERIOR DIMENSIONS: 18 INCH DIAMETER X 25 INCH STRAIGHT SIDE, SLOPE BOTT...

Hammer Price: 🔒

FRISTAM

PHARMACEUTICAL MANUFACTURING EQUIPMENT

FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 INCH X 2.5 INCH TRI CLAMP, MOTOR: 7.5 HP, 230/460 VOLT, ...

Hammer Price: 🔒

PACKAGING EQUIPMENT

BELT CONVEYOR, BELT DIMENSIONS: 13 INCH WIDE X 115 INCH LONG, FOOD GRADE PLASTIC BELT WITH CLEATS, D...

Hammer Price: 🔒

PACKAGING EQUIPMENT

BELT CONVEYOR, BELT DIMENSIONS: 7.5 INCH WIDE X 38 INCH LONG, CHARGE / DISCHARGE HEIGHT: 30 INCH HIG...

Hammer Price: 🔒

FRISTAM

PHARMACEUTICAL MANUFACTURING EQUIPMENT

FRISTAM CENTRIFUGAL PUMP, INLET & OUTLET: 3 IN. X 2.5 IN. TRI CLAMP, MOTOR: 15 HP, 230/460 VOLT, 176...

Hammer Price: 🔒

<< Previous 2 3 4 5 6 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Major Processing Packaging Equipment Liquidation CarterWilson Aevos

Save to Project Folder

Print Options

Save to Project Folder