Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More

2014 JCB TLT 3.5 TONNE DIESEL, 6893 HOURS, 4WD

INDUSTRIAL SHREDDER SYSTEM WITH INFEED HOPPER, HAMMER MILL, ELEVATOR CONVEYOR & CONTROL PANEL. INFEED/VIBRATORY HOPPER-FEEDER UNIT, MOTOR AND GEARBOX DRIVEN TROUGH FEEDER. SHREDDER/HAMMER MILL UNIT, BELT-DRIVEN, MOUNTED ON ITS OWN STEEL STAND. INCLINED CLEATED-BELT ELEVATOR CONVEYOR LIFTS SHREDDED OUTPUT FOR BAGGING, MOBILE FRAME ON CASTORS, COBALT SPEED-CONTROL PANEL. FREE-STANDING CONTROL PANEL & DISTRIBUTION CABINET WITH AUTO/MANUAL SELECTOR, EMERGENCY STOP, SPEED CONTROL; INTERNALLY FITTED WITH TWO SPRECHER+SCHUH CA6-140-E CONTACTORS (140A) AND A 160A DORMAN SMITH MAIN INCOMER BREAKER. THIS IS A COMPLETE FOUR-PART SHREDDING SYSTEM COMPRISING AN INFEED HOPPER-FEEDER, HAMMER MILL, ELEVATING CLEATED-BELT CONVEYOR AND ASSOCIATED CONTROL GEAR. CONTROL GEAR (TWIN 140A STAR-DELTA CONTACTORS AND A 160A INCOMER) IS CONSISTENT WITH A MOTOR IN THE 55-75KW RANGE. SURFACE RUST TO THE FRAME, AND WATER STAINING TO THE ELECTRICAL ENCLOSURE.

2016 NIFTYLIFT 170SD BOOM LIFT, 4 X 4 WITH OUTRIGGERS. SUPPLIED WITH 6 MONTHS LOLER CERTIFICATE. HAS HAD VERY LITTLE USE AND ONLY 2 OWNERS. NO HOUR CLOCK ON THIS MODEL.

2017 MANITOU 100VJR ELECTRIC VERTICAL MAST LIFT WITH ANTI-CRUSH PROTECTION. SELF-PROPELLED VERTICAL MAST LIFT FITTED WITH ANTI-CRUSH PLATFORM PROTECTION. 135 HOURS RECORDED. COMPACT, MANOEUVRABLE PLATFORM IDEAL FOR INDOOR MAINTENANCE AND LOW-LEVEL ACCESS WORK. SUPPLIED BY ZOOM LIFT PLATFORMS AND LOLER TESTED. GOOD CONDITION.

2019 FORD FOCUS 1.5 ZETEC 5-DOOR AUTOMATIC SHADOW BLACK MILEAGE 82,389 MOT VALID TO 26 APRIL 2027 ONE OWNER FROM NEW (COMPANY VEHICLE) VAT QUALIFYING VEHICLE SCUFF/SCRATCH VISIBLE TO THE REAR BUMPER, BELOW THE NUMBER PLATE.

2017 DAF LF 150 FA WITH A FREEZER/ CHILLER UNIT AND TAIL LIFT FITTED. PLATING CERTIFICATE INCLUDED. IT HAS COMPLETED CIRCA 56,000KM.

2018 SKYJACK SJIII 3226 ELECTRIC SCISSOR LIFT, 190 HOURS, 24V DC ELECTRIC (BATTERY) POWER SOURCE, 9.63M (31'7") WORKING HEIGHT, 7.79M (25'7") PLATFORM HEIGHT (RAISED), 2.11M X 0.71M PLATFORM DIMENSIONS WITH 0.91M ROLL-OUT EXTENSION DECK, 227KG (500 LBS) LIFT CAPACITY, 0.81M (32") OVERALL WIDTH, 2.32M (91.6") OVERALL LENGTH, 3.9 KM/H DRIVE SPEED (STOWED), 25% GRADEABILITY, SOLID NON-MARKING TYRE TYPE, 2WD REAR HYDRAULIC DRIVE. THE SKYJACK SJIII 3226 IS A WELL-REGARDED, INDUSTRY-PROVEN DC ELECTRIC SCISSOR LIFT, IDEALLY SUITED TO A WIDE RANGE OF INDOOR AND FLAT-SLAB OUTDOOR APPLICATIONS ACROSS CONSTRUCTION, MAINTENANCE, AND INDUSTRIAL ENVIRONMENTS. THIS 2018 EXAMPLE PRESENTS IN GOOD CONDITION WITH LOW RECORDED HOURS OF JUST 190, INDICATING LIGHT PRIOR USE. STANDARD FEATURES INCLUDE SKYJACK'S SKYCODED COLOUR-CODED WIRING SYSTEM FOR STRAIGHTFORWARD SERVICING, PROPORTIONAL DRIVE AND LIFT CONTROLS, TILT ALARM WITH DRIVE AND LIFT CUT-OUT, POTHOLE PROTECTION, FOLD-DOWN HINGED RAILING, AND AN ON-BOARD AC OUTLET. THE MACHINE IS DRIVEABLE AT FULL HEIGHT WITH THE ROLL-OUT DECK EXTENDED, PROVIDING EXCELLENT FLEXIBILITY FOR ELEVATED ACCESS TASKS. S/N: 27034661

STAINLESS STEEL HIGH VACUUM CHAMBER WITH ISO FLANGED PORTS - 25MM THICK 316 STAINLESS STEEL, WELDED BOX CONSTRUCTION. DIMENSIONS APPROX. 700MM (H) X 600MM (W) X 600MM (D). MULTIPLE ISO FLANGED PORTS OF VARYING DIAMETERS, INCLUDING A SIGHT GLASS VIEWPORT. HINGED DOOR WITH INTERNAL PORT CUT-OUTS FOR FEEDTHROUGHS/FITTINGS. FORMERLY USED FOR PLASMA DEPOSITION. APPROX. 500KG. CARBON STEEL SUPPORT STAND SHOWN IN IMAGES IS NOT INCLUDED. A SUBSTANTIAL 316 STAINLESS STEEL HIGH VACUUM CHAMBER OF HEAVY 25MM PLATE CONSTRUCTION, FITTED WITH NUMEROUS ISO FLANGED PORTS INCLUDING A SIGHT GLASS VIEWPORT, AND A HINGED ACCESS DOOR WITH INTERNAL CUT-OUTS FOR FURTHER FEEDTHROUGHS. FORMERLY USED IN A PLASMA DEPOSITION PROCESS. A WELL-BUILT, HEAVY-DUTY CHAMBER SUITED TO VACUUM, PLASMA, OR PROCESS ENGINEERING APPLICATIONS. FREE LOADING WITH FORKLIFT CAN BE ARRANGED BY PRIOR AGREEMENT.

NEW KUBOTA Z1-421 ZERO TURN RIDE ON MOWER, 42 ROTARY CUT DECK SIDE DISCHARGE, KAWASAKI 21.5HP ELECTRIC START ENGINE, INSTANT FORWARD & REVERSE, EASY HEIGHT OF CUT ADJUSTMENT. KUBOTA MANUFACTURERS WARRANTY 300 HOURS OR 2 YEARS. MACHINE APPROXIMATE SPECIFICATIONS: LENGTH 1890MM HEIGHT 1650MM WHEELBASE 1235MM WEIGHT 282KG

2015 YALE GDP35VX V3045 DIESEL FORKLIFT TRUCK (3700 HOURS) 3.5 TON LIFT SIDE SHIFT 4.6 M LIFT HEIGHT

PRIMERA FX1200 LABEL FINISHING SYSTEM. DIGITAL FINISHING SYSTEM TO DIGITALLY CUT LABELS TO ANY SIZE OR SHAPE WITHOUT DIES, LAMINATE, SLIT AND REWIND LABELS IN A SINGLE PROCESS. ALL-IN-ONE OFF-LINE SOLUTION THAT PRODUCES ROLLS OF FINISHED LABELS PRODUCED BY A VARIETY OF NARROW-WEB OUTPUT DEVICES LIKE THE PRIMERA CX1200 OR AFINIA L801 MEMJET LABEL PRINTERS. QUICKLY AND EASILY PERFORM ALL OF THESE LABEL FINISHING STEPS IN A SINGLE, INTEGRATED AND AUTOMATED PROCESS.

2016 FORD FOCUS 1.5 TDCI 120 TITANIUM X, BLUE, 90,261 MILES, MOT TO 25/01/2027. TITANIUM X SPECIFICATION BRINGS A WELL-EQUIPPED TRIM LEVEL TO THIS POPULAR HATCHBACK. THE VEHICLE CARRIES A CURRENT MOT VALID INTO JANUARY 2027, WITH A PASS RECORDED AT ITS LAST TEST IN JANUARY 2026. REGISTRATION YR66 KRV.

1981 SAFAN SKE 60-2050 PRESS BRAKE 4KW MOTOR 440 VOLT 9 AMP 50 HZ S/N: 802116

2001 IVECO RECOVERY TRUCK, 887,820 KM'S REGISTERED AS A RECOVERY TRUCK MANUAL GEARBOX STARTS DRIVER SOLID STEEL BED SIDE LIGHT 2 SPOTLIGHTS ON BACK FOR WORKING IN THE DARK TUCK AWAY STEEL RAMPS SWINCH WITH REMOTE CAB REQUIRES SOME PATCH WELDING V5 PRESENT KEYS STARTS, DRIVES & BRAKES

2018 FORD MONDEO 2.0 TDCI ZETEC 5-DOOR, SHADOW BLACK, 6-SPEED MANUAL, 147,089 MILES, MOT VALID TO 4 JANUARY 2027. VISIBLE STONE CHIPS TO THE BONNET, A SCUFF TO THE REAR BUMPER, A CRACK TO THE REAR PASSENGER DOOR/WINDOW TRIM MOULDING, AND LIGHT SCRATCHING TO THE DRIVER'S SIDE FRONT DOOR.

2013 MS PRINTING SOLUTIONS JP7 PRINTING MACHINE & UPDATED BRUSH ROLLER BY MINK BRUSHES GERMANY. SUITABLE FOR ALL PAPER TYPES, VOLTAGE 400V, FREQUENCY 50 / 60 HZ, 3 PHASE, 38 KVA. THE MS PRINTING SOLUTIONS JP7 IS AN INDUSTRIAL DIGITAL TEXTILE PRINTER DESIGNED FOR HIGH-QUALITY, HIGH-SPEED FABRIC PRODUCTION. SUITABLE FOR FASHION, HOME TEXTILES AND SOFT SIGNAGE, IT OFFERS EXCELLENT COLOUR ACCURACY AND SHARP DETAIL THROUGH ADVANCED MULTI-PASS PRINTING TECHNOLOGY. THE MACHINE SUPPORTS A WIDE RANGE OF FABRICS WITH PRECISE TENSION CONTROL AND INCLUDES AN INTEGRATED CONVEYOR SYSTEM FOR RELIABLE ROLL-TO-ROLL OPERATION. IDEAL FOR MEDIUM-TO-HIGH VOLUME TEXTILE MANUFACTURING. S/N: 2503/13

2023 GRUNDFOS PUMP, NEVER BEEN INSTALLED, 0 RUNNING HOURS, FLOW RATE: 293.9M3/HR AT 71.2M, PORTS ARE CAPPED, DRY STORED, WEIGHT: 1.1 TONNES, ASSISTANCE WITH LOADING ONTO A SUITABLE VEHICLE WILL BE GIVEN, PURCHASED ON 31/3/2023, SUFFERED MINOR COSMETIC DAMAGE, SURPLUS TO REQUIREMENTS

2026 CONTROL TECHNIQUES UNIDRIVE M700 132KW/160KW VARIABLE FREQUENCY DRIVE. MODEL M000-104 02700 DUO. POWER RATING 132KW (160KW BOOST). INPUT 485-743V 3PH, 374A. OUTPUT 0-480V, 0-550HZ, 3PH, 270/320A. CONTROL KEYPAD M700-STANDARD, S/N M222919212. PROTECTION RATING IP20. EFFICIENCY IE2-VSD 97%. MANUFACTURED ROMANIA. WEIGHT APPROX. 46KG. HEAVY-DUTY 3-PHASE INVERTER, RATED 132KW WITH 160KW BOOST CAPABILITY AND A 0-550HZ OUTPUT RANGE. COMMISSIONED THEN DRY STORED. IDEAL FOR HIGH-POWER INDUSTRIAL MOTOR CONTROL APPLICATIONS. S/N E224400025

HUSQVARNA R112C ARTICULATED REAR-COLLECT RIDE-ON MOWER (85CM COMBI DECK) ARTICULATED 4-WHEEL DRIVE OUT-FRONT RIDER, 85CM COMBI CUTTING DECK (BIOCLIP MULCHING / REAR DISCHARGE), HYDROSTATIC PEDAL TRANSMISSION, HUSQVARNA HS413AE 344CC SINGLE-CYLINDER PETROL ENGINE. A COMPACT AND HIGHLY MANOEUVRABLE HUSQVARNA R112C RIDER, WELL SUITED TO SMALLER-TO-MEDIUM RESIDENTIAL OR GROUNDS MAINTENANCE AREAS WHERE STANDARD-SIZE RIDERS CAN'T EASILY MANOEUVRE. THE ARTICULATED STEERING AND PIVOTING REAR AXLE ALLOW TIGHT TURNS AROUND BEDS, TREES AND OBSTACLES WHILE MAINTAINING TRACTION ON SLOPES AND UNEVEN GROUND. THE 85CM COMBI DECK OFFERS THE FLEXIBILITY OF BIOCLIP MULCHING OR REAR EJECTION FOR LONGER GRASS. SHOWS GENERAL SIGNS OF PREVIOUS GARDEN USE WITH LIGHT SURFACE SCUFFING AND MARKING TO THE BODYWORK; TYRES HAVE GOOD USABLE TREAD. USED GENERAL WEAR CONSISTENT WITH PREVIOUS OUTDOOR/GARDEN USE, NO MAJOR DAMAGE VISIBLE.

26FT STATIC WELFARE CABIN WITH GENERATOR, TOILET, CANTEEN, OFFICE - 10FT WIDE

PHIXWELL XXL PROFESSIONAL TOOL CABINET (MODEL XT-802) FULLY LOADED, 7 DRAWERS + CUPBOARD. A SUBSTANTIAL PHIXWELL XXL PROFESSIONAL TOOL CABINET FINISHED IN GLOSS BLACK WITH RED DRAWER FRONTS, FULLY STOCKED ACROSS ALL DRAWERS WITH A COMPREHENSIVE SELECTION OF HAND TOOLS. THE CABINET FEATURES 7 DRAWERS WITH FULL-EXTENSION BALL-BEARING SLIDES, A LOCKABLE SIDE CUPBOARD, STAINLESS STEEL TOP WORK SURFACE WITH INTEGRATED TOOL HOLDERS, AND CASTORS FOR MOBILITY. ALL DRAWERS ARE FOAM-LINED WITH TOOLS PRESENTED IN MOULDED TRAYS. CONTENTS ACROSS DRAWERS INCLUDE: SOCKET SETS 1/4", 3/8" AND 1/2" DRIVE RATCHETS, DEEP AND SHALLOW METRIC SOCKETS (4MM-32MM), UNIVERSAL JOINTS AND EXTENSION BARS. SCREWDRIVERS 20+ PIECE SET INCLUDING TORX (T6-T40), PHILLIPS (PH0-PH3), SLOTTED (SL3-SL8) AND SPECIALIST BITS WITH BI-MATERIAL HANDLES. SCREWDRIVER BITS & SOCKETS LARGE ASSORTMENT OF 1/4" HEX BITS COVERING TORX, PHILLIPS, POZIDRIVE, HEX, FLAT AND SPECIALTY PROFILES; DEEP BIT SOCKETS. COMBINATION SPANNERS & TORQUE WRENCH METRIC RATCHET SPANNERS (8-19MM), 21MM AND 22MM RING SPANNERS, AND A 1/2" DRIVE TORQUE WRENCH. T-HANDLE ALLEN KEYS (HEX & TORX) 16-PIECE SET INCLUDING H2-H12 HEX AND T10-T45 TORX IN VARIOUS LENGTHS. PLIERS & STRIKING TOOLS EXTERNAL/INTERNAL SNAP RING PLIERS (STRAIGHT & BENT NOSE), 6" DIAGONAL PLIERS, 6" BENDING PLIERS, 6" LONG NOSE PLIERS, COMBINATION PLIER, 10" WATER PUMP PLIER, 300G HAMMER, PUNCH SET (2-6MM). CONDITION: NEW, ALL TOOLS PRESENTED IN ORIGINAL FOAM-LINED DRAWER TRAYS, STILL IN PROTECTIVE WRAPPING.

1998 KING RICH INDUSTRIES KR-V2000 VERTICAL TURRET MILLING MACHINE, BRIDGEPORT-STYLE MILL SUPPLY: 415V, 3 PHASE POWER: 2.25 KW (3HP)

LARGE BAUER TYPE SCUBA DIVING COMPRESSOR - 4 STAGE, 300 BAR. 4-STAGE HIGH PRESSURE BREATHING AIR COMPRESSOR. OUTPUT 300 BAR / 4,500 PSI AT APPROX. 1520 CFM. MOTOR 15KW+ CAST IRON ELECTRIC MOTOR. MOUNTED ON SHIPPING/TRANSPORT FRAME. FORMERLY OPERATED AT A REFINERY FOR BREATHING AIR. SPINS FREELY BY HAND, HAS CLEAN OIL, AND HAS BEEN WELL MAINTAINED. MOUNTED ON A SHIPPING FRAME FOR EASE OF HANDLING. FOR DIVE CENTRES, BREATHING AIR SUPPLIERS, OR INDUSTRIAL USERS NEEDING HIGH-PRESSURE AIR. SPINS FREELY, CLEAN OIL, WELL MAINTAINED.

GREEN MACHINE 424HS WALK BEHIND ROAD & YARD SWEEPER WITH RIDE ON CAB ATTACHMENT SPARES OR REPAIRS NON RUNNER NOT BEEN LOOKED AT BUT LOOKS ALL THERE FROM CLEARANCE

NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SOURCE, NO LEADS INCLUDED

IMPRESS HM4 HEAVY DUTY TOGGLE PRESS - IMPRESS HM4 HEAVY DUTY TOGGLE PRESS. BRITISH BUILT, HEAVY DUTY TOGGLE PRESS DESIGNED FOR HIGH PRESSURE HOT FOIL STAMPING AND LEATHER EMBOSSING. ROBUST, TABLETOP INDUSTRIAL MACHINE SUITABLE FOR BOTH BEGINNERS AND PROFESSIONAL PRINTERS.

2025 BROUGHTON MCE 9.0-21E MOBILE AIR CONDITIONER INCLUDING BLUE INSULATED BAG PREVIOUSLY USED AS A TEMPORARY PRODUCT COOL STORE

PRIMERA AP362E LABEL APPLICATOR. THE PRIMERA AP362E LABEL APPLICATOR IS A SEMI AUTOMATIC DEVICE DESIGNED FOR APPLYING ONE OR TWO LABELS TO CYLINDRICAL AND TAPERED CONTAINERS, SUCH AS BOTTLES AND JARS.

HIKMICRO B SERIES COMPACT, HANDHELD THERMOGRAPHY CAMERA. DESIGNED FOR RAPID TROUBLESHOOTING IN BUILDING, HVAC, AND AUTOMOTIVE APPLICATIONS. FEATURES A HIGH-SPEED 25 HZ FRAME RATE FOR SMOOTH REAL-TIME VIEWING COMPARED TO MANY STANDARD 9 HZ MODELS.

CEBORA TIGSTAR 150 DC WELDING MACHINE. VINTAGE, PROFESSIONAL-GRADE INVERTER WELDING MACHINE DESIGNED FOR DC TIG AND MMA (STICK) WELDING.

SECURITY CABIN, DIMENSIONS: H: 2.25M | W: 2.25M | D: 2.25M - STANDALONE SECURITY CABIN. EXTRACTION VIA ROLLER SHUTTER DOOR.

LITHIUM ION BATTERY PACK, POSSIBLY 24V DC, INC. BMS WIRE LOOM CONNECTIONS

2022 CUBIGEL CNUT60CAE3N REFRIGERATION CONDENSING SET. TROPICALISED CONDENSING UNIT, VOLTAGE 220-240V 50HZ, REFRIGERANT R290. PRESSURE (HP/LP) 21.2 BAR / 3.4 BAR. INCLUDES FRIGOMEC RV-85X190-102843 RECEIVER (S/N 1801858, 0.89L, TEST PRESSURE 40.04 BAR, MAX PERMISSIBLE 28/21 BAR), KARYER HEAT EXCHANGERS CONDENSER (CODE 101997), COMPRESSOR, STARTER, MANIFOLD, AND CONDENSER WITH FAN. HIGHER COOLING CAPACITY CONDENSER FITTED FOR DEMANDING APPLICATIONS. NEW/UNUSED, STILL BOXED IN ORIGINAL PACKAGING.

BENCHTOP THICKNESS PLANER MOUNTED ON A FABRICATED STEEL PEDESTAL CABINET WITH LOUVRED DOOR. FEED ROLLER AND TABLE HEIGHT ADJUSTMENT MECHANISM VISIBLE. IRWIN TOOL BAG AND GREEN CRATE OF MIXED HAND TOOLS ALSO PRESENT ON/AROUND THE UNIT. SUITABLE FOR SMALL JOINERY OPERATIONS, HOBBYISTS, AND TRADE BUYERS.

VACULEX3 2.5KW PUMP UNIT (MODEL 20) USED IN VACULEX VACUUM TUBE LIFTING SYSTEMS, SUCH AS THE VACULEX VL SERIES, NOW PART OF PIAB GROUP, SPECIALISES IN ERGONOMIC VACUUM LIFTING SOLUTIONS FOR HANDLING LOADS UP TO 250 KG.

VALLON VMR3 'MINE-HOUND' MINE & IED DETECTOR - DETECTING UNIT ITSELF, MODIFIED. NO ACCESSORIES INCLUDED.

CUSTOM MADE MINI REAM MACHINE APPROXIMATE DIMENSIONS: HEIGHT - 145CM WIDTH - 128CM DEPTH - 115CM

ATLAS COPCO XAS 47 ROAD TOW DIESEL AIR COMPRESSOR, 1954 HOURS. POWERED BY A 19KW KUBOTA DIESEL ENGINE. AIR DELIVERY 105 CFM. WORKING PRESSURE 7 BAR (100 PSI). RECORDED HOURS 1,954. NEW 50MM BALL HITCH FITTED. WEIGHT APPROX. 650KG. OIL, FUEL & AIR FILTERS CHANGED; SERVICED THEN DRY STORED. STARTS FIRST TIME AND RUNS WELL.

CUBIGEL CB52CL4N REFRIGERATION CONDENSING SET COMPRESSOR UNIT CUBIGEL CB52CL4N HIGH EFFICIENCY CONDENSING UNIT SERIAL NO. 357483-000005 CODE 602018 VOLTAGE 220-240V 50HZ REFRIGERANT R600A MAX AMBIENT TEMP 43C CONDENSER LU-VE HIGH EFFICIENCY CONDENSER WITH FAN INCLUDES COMPRESSOR, STARTER, REFRIGERANT DRIER, CAPILLARY TUBE & CONDENSER WITH FAN A BRAND NEW, UNUSED CUBIGEL CB52CL4N REFRIGERATION CONDENSING SET, COMPLETE WITH STARTER, REFRIGERANT DRIER, CAPILLARY TUBE, AND A LU-VE HIGH-EFFICIENCY CONDENSER WITH FAN. COMPACT AND EFFICIENT. STILL BOXED IN ORIGINAL PACKAGING.

INDESPENSION 12FT TWIN AXLE BRAKED FLATBED TRAILER GROSS WEIGHT 3,500KG TARE WEIGHT 760KG CHASSIS GALVANISED LIGHTING LED WINCH HAND WINCH FREE WHEEL & RATCHET BOTH WAYS BRAKES AXLE & HAND BRAKE, BOTH CONFIRMED WORKING JOCKEY WHEEL NEW ASSEMBLY FITTED GALVANISED-CHASSIS 12FT TWIN AXLE BRAKED FLATBED TRAILER, 3,500KG GROSS / 760KG TARE. FITTED WITH A HAND WINCH (FREE WHEEL AND RATCHET BOTH WAYS), LED LIGHTING, AND A NEWLY FITTED JOCKEY WHEEL ASSEMBLY. AXLE AND HAND BRAKE BOTH CONFIRMED IN WORKING ORDER, WITH GOOD TYRES ALL ROUND. USED, GOOD TYRES, BRAKES AND WINCH CONFIRMED WORKING, NEW JOCKEY WHEEL FITTED

1985 GRUNDY (TEDDINGTON) 230 LITRE STAINLESS STEEL FILTRATION VESSEL. ALL STAINLESS STEEL GRAVITY FILTRATION VESSEL, 230 LITRE CAPACITY, WITH HINGED LID AND DISCHARGE VALVE. REMOVABLE FILTER BASKET INCLUDED. TEST PRESSURE 45 PSI. APPROX. 100KG. SUITABLE FOR FOOD, CHEMICAL, OR GENERAL PROCESS FILTRATION DUTIES.

BLACK FABRIC OFFICE CHAIR X3 APPROXIMATE DIMENSIONS: HEIGHT - 85CM WIDTH - 53CM DEPTH - 50CM

4 PALLETS OF QUILIGOTTI TERRAZZO PAVING TILES. MANUFACTURED IN THE UK. FEATURING A SMOOTH MACHINED FINISH IN GREY TONES WITH MIXED STONE, THESE TILES ARE SUITABLE FOR PATIOS, PATHWAYS, DRIVEWAYS, AND COMMERCIAL LANDSCAPING APPLICATIONS. SIZE: 300MM X 300MM X 28MM | COLOUR: GREY SMOOTHED MACHINED | MADE IN THE UK | WEIGHT: APPROX. 1,100KG PER PALLET | TOTAL LOT WEIGHT: APPROX. 4,400KG | PALLETS: 4. CONDITION: NEW/UNUSED STOCK, PALLETISED AND WRAPPED.

10 X PALLETS OF QUILIGOTTI TERRAZZO PAVING TILES. SIZE: 300MM X 300MM X 28MM | COLOUR: GREY SMOOTH MACHINED | MADE IN THE UK | WEIGHT: APPROX. 1,100KG PER PALLET | TOTAL LOT WEIGHT: APPROX. 11,000KG. NEW/UNUSED STOCK, PALLETISED AND WRAPPED.

10 PALLETS OF QUILIGOTTI TERRAZZO PAVING TILES. SMOOTH MACHINED FINISH IN GREY TONES WITH MIXED STONE, SUITABLE FOR PATIOS, PATHWAYS, DRIVEWAYS, AND COMMERCIAL LANDSCAPING APPLICATIONS. SIZE: 300MM X 300MM X 28MM | COLOUR: GREY SMOOTH MACHINED | MADE IN THE UK | WEIGHT: APPROX. 1,100KG PER PALLET | TOTAL LOT WEIGHT: APPROX. 11,000KG. NEW/UNUSED STOCK, PALLETISED AND WRAPPED.

BLUE METAL SACK TRUCK APPROXIMATE DIMENSIONS: HEIGHT - 102CM WIDTH - 51CM DEPTH - 50CM

CLARKE METAL SACK TRUCK APPROXIMATE DIMENSIONS: HEIGHT - 124CM WIDTH - 52CM DEPTH - 38CM

METAL SACK TRUCK APPROXIMATE DIMENSIONS: HEIGHT - 124CM WIDTH - 60CM DEPTH - 54CM

BRABENDER EXTRUDER APPROXIMATE DIMENSIONS: HEIGHT - 125CM WIDTH - 110CM DEPTH - 60CM S/N: 984023

INTRACOOLER CHILLING MACHINE APPROXIMATE DIMENSIONS: HEIGHT - 58CM WIDTH - 40CM DEPTH - 52CM