Van Drunen Farms Snack Food and Ingredients Processing and Packaging Equipment Auction
Category: TANKS, PUMPS & STORAGE EQUIPMENT
Total Lots:
345
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
CONTINENTAL CAN CO. | PANAMA |
[CONTINENTAL CAN CO. PANAMA CAN SEAMER] WITH: SCREW PITCH: 6 INCHES SCREW LENGTH: 22 INCHES DIAMETER OF CAN: 4 INCHES OVERALL DIMENSIONS: LENGTH: 70 INCHES WIDTH: 44 INCHES HEIGHT: 88 INCHES [FARQUHAR 610 CONVEYOR] WITH: SERIAL #: P-65721 INFEED WIDTH: 37 INCHES DISCHARGE WIDTH: 40 INCHES BELT DIMENSIONS: LENGTH: 68 INCHES WIDTH: 9.5 INCHES OVERALL DIMENSIONS: LENGTH: 71 INCHES WIDTH: 16 INCHES HEIGHT: 41 INCHES
|
🔒 Subscribe | |
|
|
RAPAT | V-BELT CONVEYOR |
RAPAT V-BELT CONVEYOR WITH: CONVEYOR DIMENSIONS: (2) 7 INCH WIDTH BELTS LENGTH: 168 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 24 INCHES DISCHARGE HEIGHT: 21 INCHES ELECTRICAL REQUIREMENTS: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE PAINTED MILD STEEL FRAME MOUNTED ON CASTERS OVERALL DIMENSIONS: LENGTH: 176 INCHES WIDTH: 28 INCHES HEIGHT: 36 INCHES
|
🔒 Subscribe | |
|
|
PETERS | LINE 3 |
PETERS BISCUIT & CRACKER MACHINERY LINE 3 - USED PETERS BISCUIT & CRACKER MACHINERY WITH: SANDWICHING MACHINE PRODUCTION OUTPUT RATE: UP TO 3200 SANDWICHES PER MINUTE FOUR (4) LANES WITH REJECT OPTIONS ALLEN-BRADLEY PANELVIEW CONTROLS
|
🔒 Subscribe | |
|
|
LAUDENBERG | FBL 22 HFFS |
LAUDENBERG FBL 22 HFFS POUCH MACHINE WITH ZIPPER - USED LAUDENBERG FBL 22 HFFS POUCH MACHINE WITH: INTERMITTENT, ROTARY HORIZONTAL POUCH FORM, FILL SEALER FORMS AND FILLS POUCH UPSIDE DOWN, TOP OF THE FINISHED POUCH IS SEALED FIRST OUTPUT: UP TO 200 POUCHES PER MINUTE, DEPENDING ON PRODUCT, FILL METHOD, AND POUCH SIZE POUCH DIMENSIONS: MINIMUM: 4.72 INCHES WIDE X 3.93 INCHES LONG MAXIMUM: 7.4 INCHES WIDE X 13 INCHES LONG CURRENT POUCH SIZE: APPROXIMATELY 6 INCHES WIDE X 11 INCHES LONG CURRENT FILM WIDTH: 22 INCHES RESEALABLE ZIPPER APPLICATOR GAS FLUSH PRINT REGISTRATION POUCH HANGER HOLE PUNCH SERVO MOTOR DRIVEN FOOD GRADE, STAINLESS STEEL CONSTRUCTION ALLEN-BRADLEY LOGIX5561 CONTROLS REXROTH INDRAMAT SERVO MOTOR DRIVES ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI
|
🔒 Subscribe | |
|
|
2018 | VEROPAK LTD. | DENESTER |
2018 VEROPAK LTD. DENESTER STAINLESS STEEL PICK-AND-PLACE PAPER CUP DISPENSER WITH: MANUFACTURER: VEROPAK LTD. MODEL: DENESTER SERIAL: V317 THROUGHPUT: 14 PANS PER MINUTE 20,160 PRODUCTS PER HOUR (FOR BOTH PRODUCTS) PAN SIZE: LENGTH: 6 INCHES WIDTH: 4 INCHES CURRENT TOOLING: CUPCAKE TULIP CONVEYOR SPEED: FEET PER MINUTE: APPROXIMATELY 24 METERS PER MINUTE: APPROXIMATELY 7.4 AIR REQUIREMENT: 4-6 BAR ELECTRICAL REQUIREMENTS: VOLTS FREQUENCY PHASE STAINLESS STEEL FRAME ON CASTER WHEELS S/N: V317
|
🔒 Subscribe |
|
|
BERTOLASO | SIGMA 605/605 |
BERTOLASO SIGMA 605/605 STAINLESS STEEL ROTARY CAPPER - USED BERTOLASO SIGMA STAINLESS STEEL ROTARY FILLER: PRODUCTION SPEED: 75 CAPS PER MINUTE CAP SIZE: 28 MILLIMETER INFEED HEIGHT: 41 INCHES CONVEYOR WIDTH: 5 INCHES SCREW DIMENSIONS: FLIGHT: 4 INCHES LENGTH: 23 INCHES STAR WHEEL INFEED STAINLESS STEEL CONSTRUCTION ELECTRICAL: 480 VOLTS, 60 HERTZ, 3 PHASE LAST BOTTLE SIZES RAN: 100-500 MILLILITERS
|
🔒 Subscribe | |
|
|
BLUEPRINT AUTOMATION | TAPE BOTTOM SEAL CASE ERECTOR |
BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR WITH: 2 INCH TAPE HEAD BOTTOM SEAL ALLEN-BRADLEY PANELVIEW PLUS 700 HMI PERSONNEL GUARDING MANUAL SWITCHES
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 |
AUTOBAG SPRINT 60 SIDEPOUCH STAINLESS STEEL BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
HAYSSEN | ULTIMA |
HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER ONLY - USED HAYSSEN ULTIMA WITH: OUTPUT: UP TO 100 BAGS PER MINUTE MINIMUM BAG DIMENSIONS: LENGTH: 3 INCHES WIDTH: 2 INCHES MAXIMUM BAG DIMENSIONS: LENGTH: 8 INCHES WIDTH: 8 INCHES AIR REQUIRMENTS: 65 PSI ELECTRICAL: 230 VOLTS, 1 PH, 60 HZ
|
🔒 Subscribe | |
|
|
UBE | 175 |
UBE MODEL 175 STAINLESS STEEL BREAD OVERWRAPPER - USED UBE MODEL 175 OVERWRAPPER WITH: INFEED/OUTFEED CONVEYOR UP TO 75 LOAVES PER MINUTE MINIMUM LOAF SIZE: 7 INCHES X 3 INCHES X 3 INCHES MAXIMUM LOAD SIZE: 16 INCHES X 6 INCHES X 6 INCHES TUBULAR STAINLESS STEEL FRAME AND ALUMINUM GUARDS DRIVE SYSTEM WITH STRONGER GEAR BOX FOR HIGH SPEED PRODUCTION DUAL BAG MAGAZINE WITH TOP MOUNTED BAG INFLATOR JET SOLID STATE CONTROL CIRCUIT WITH PROXIMITYIES AUTOMATIC BAG CHANGER WITH PROGRAMMABLE CONTROLLER DIGITAL SPEED INDICATOR
|
🔒 Subscribe | |
|
|
K&R PBI | POLY BAG INSERTER AND TAPE CASE ERECTOR |
[K&R PBI] POLY BAG INSERTER AND TAPE CASE ERECTOR WITH: FUNCTION: FEED/ERECT K/D CASE FROM CASE MAGAZINE, INDEX CASE TO BAG INSERTION STATION, UNWIND POLY-BAG FROM ROLL STACK, CUFF SEPARATED BAG OVER EXTENDED UPPER FLAPS, INSERT BAG WITH AIR EVACUATION SYSTEM, INDEX CASE THROUGH BOTTOM CLOSING SHOES AND 3 INCH TAPING HEAD, CASE THEN EXITS MACHINE. CASE SIZE RANGE: MINIMUM: 10 INCHES LONG X 6 INCHES WIDE X 6 INCHES TALL. MAXIMUM: 12 INCHES LONG X 12 INCHES WIDE X 15 INCHES TALL. K/D: 24 INCHES (K/D EQUALS LENGTH PLUS WIDTH OF THE BOX IN FLAT POSITION). AIR REQUIREMENTS: 80 PSI. SUGGESTED GUSSETED POLY BAG SIZES: 14 INCH FACE X 11.5 INCH GUSSET X 26 INCHES LONG, 13.25 INCH FACE X 10 INCH GUSSET X 23.5 INCHES LONG. OUTPUT: UP TO 15 CASES PER MINUTE. FEATURES: TIME DELAY SENSOR CONTROL TO MONITOR CASE SUPPLY ON EXIT CONVEYOR, BAG WEB BREAK SENSOR, LOW BAG ROLL ALARM, LOW CASE SUPPLY ALARM, BAG WEB STATIC ELIMINATOR BAR, AIR LINE MONITOR TO STOP MACHINE IF PRESSURE DROPS BELOW ACCEPTABLE LEVEL.
|
🔒 Subscribe | |
|
|
USED PALLET OF MRO WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 37 INCHES
|
🔒 Subscribe | |||
|
|
(2) AIR INLET BOXES WITH BIRD SCREENS - (2) USED AIR INLET BOXES WITH BIRD SCREENS WITH: FIRST AIR INLET BOX DIMENSIONS: LENGTH: 30 INCHES WIDTH: 27 INCHES HEIGHT: 82 INCHES SECOND AIR INLET BOX DIMENSIONS: LENGTH: 28 INCHES WIDTH: 24 INCHES HEIGHT: 84 INCHES
|
🔒 Subscribe | |||
|
|
CROWN FOOD | EC-10 |
CROWN FOOD 10 GALLON EC-10 TILTING STEAM KETTLE - USED CROWN FOODS TILTING STEAM KETTLE WITH: CAPACITY: 10 GALLONS MAX WORKING PRESSURE: 50 PSI AT 298 DEGREES FAHRENHEIT MANUAL TILT LOW WATER INDICATOR PSI GUAGE LID STAINLESS STEEL CONSTRUCTION ELECTRICAL: 250V 3 PHASE
|
🔒 Subscribe | |
|
|
FORMOST FUJI | FW3400A-5 |
FORMOST FUJI FW3400A-5 HORIZONTAL FLOW WRAPPER - USED FORMOST FUJI FW3400A-5 FLOW WRAPPER WITH: PRINT REGISTERED HORIZONTAL FLOW WRAPPER INFEED LENGTH: 100 INCHES MANUAL PRODUCT LOAD LUGGED INFEED LUG CENTERS: 14 INCHES FILM WIDTH: 17 INCHES AUTOMATIC FILM SPLICING ROTARY LONGITUDINAL FIN SEAL TOUCH SCREEN HMI LEFT TO RIGHT PRODUCT FLOW STAINLESS STEEL CONTACT PARTS PAINTED, MILD STEEL FRAME LAST USED FOR BAGELS
|
🔒 Subscribe | |
|
|
NERI | RO800 |
NERI RO800 AUTOMATIC STAINLESS STEEL ROTARY CUT STACK AND ROLL FED LABELER - USED NERI RO800 LABELER WITH: 2 LABELING STATIONS: CUT AND STACK ROLL FED 8 BOTTLE STATIONS RIGHT TO LEFT PRODUCT FLOW TIMING SCREW AND STAR WHEEL INFEED TOUCH SCREEN HMI STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
CLIMAX | DP4-1/LD |
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONSTRUCTION MAXIMUM OUTPUT: UP TO 28 CASES PER MINUTE (DEPENDING ON PRODUCT AND CONFIGURATION) CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 8 INCHES WIDE X 3 INCHES HIGH MAXIMUM: 22 INCHES LONG X 15 INCHES WIDE X 16 INCHES HIGH 6 LANES APPROXIMATE DIMENSIONS: LENGTH: 12 FEET WIDTH: 42 INCHES ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3 AIR REQUIREMENTS: 60PSI
|
🔒 Subscribe | |
|
|
TRIPACK | ST-1 7.5 |
TRIPACK ST-1 7.5 STAINLESS STEEL STEAM TUNNEL - USED TRIPACK ST-1 7.5 STEAM TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 9.5 INCHES HEIGHT: 19 INCHES TUNNEL LENGTH: 79 INCHES INFEED/DISCHARGE HEIGHT: 22 INCHES EXHAUST BLOWER MAXIMUM: 592 CFM AIR REQUIREMENTS: 80 PSI BLOWER MOTOR: 1 HORSEPOWER, 3,450 RPM OVERALL DIMENSIONS: LENGTH: 79 INCHES WIDTH: 24 INCHES HEIGHT: 74 INCHES STAINLESS STEEL CONSTRUCTION ANALOG CONTROLS ELECTRICALS: 3 PHASE, 15 AMPS, 220 VOLTS
|
🔒 Subscribe | |
|
|
SHANKLIN | F-5 |
[SHANKLIN F-5] SIDE SEAL AUTOMATIC HIGH SPEED SHRINK WRAPPER W/ LUGGED INFEED - SHANKLIN SIDE SEALER WITH LUGGED INFEED WITH: OUTPUT RATE: UP TO 75 PACKAGES PER MINUTE DEPENDING ON PRODUCT PRODUCT DIMENSIONS: LENGTH: 3 INCHES MINIMUM, 48 INCHES MAXIMUM WIDTH: 0.5 INCH MINIMUM, 16 INCHES MAXIMUM HEIGHT: 0.125 INCH MINIMUM, 6 INCHES MAXIMUM MAX FILM WIDTH: FOLDED: 22 INCHES FLAT: 44 INCHES SEAL BAR WIDTH: 19 INCHES CENTERS: 10 INCHES LUG HEIGHT: 1 INCH GUIDE RAIL HEIGHT: 3 INCHES INFEED LENGTH: 105 INCHES DISCHARGE HEIGHT: 33 INCHES BELT WIDTH: 5.5 INCHES SEALING METHOD: HOT KNIFE JAW LUGGED INFEED FILM PROOFER POWER UNWIND PAD DIMENSIONS: WIDTH: 5 INCHES LENGTH: 6 INCHES OVERALL DIMENSIONS: LENGTH: 180 INCHES WIDTH: 55 INCHES HEIGHT: 50 INCHES MOTOR: 0.75HP, DC WITH VARIABLE SPEED CONTROL ELECTRICAL: 230 V, 20 A, 1 PHASE
|
🔒 Subscribe | |
|
|
ISHIDA | DACS-V-012-SI/WP-N |
[ISHIDA DACS-V-012-SI/WP-N] BELT CHECKWEIGHER WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9 INCHES LENGTH: 16 INCHES BELT DISCHARGE HEIGHT: 31.5 INCHES OVERALL DIMENSIONS LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 64 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS 60 HZ 3-PHASE 1.7 AMPS
|
🔒 Subscribe | |
|
|
PRO PACK SYSTEMS | PRO SEALER TOP ONLY |
PRO PACK SYSTEMS PRO SEALER TOP ONLY CASE TAPER WITH: TOP ONLY CASE TAPER SEALER 2 INCH TAPE HEAD (DEKKA 22) 5 INCH WIDE RUBBER BELT (2) 1/2 HORSEPOWER MOTORS MAXIMUM BOX DIMENSIONS (INCHES): 17 X 17 CONVEYOR DIMENSIONS (INCHES): 91 LENGTH X 12 INCHES WIDE
|
🔒 Subscribe | |
|
|
MATEER-BURT | 1800B |
[MATEER-BURT 1800B] SERVO DRIVEN AUGER FILLER - USED MATEER-BURT 1800B AUGER FILLER WITH: SERVO MOTOR DRIVEN HOPPER DIMENSIONS: 15 INCHES DEEP X 21 INCH BASE DIAMETER APPROXIMATE HOPPER CAPACITY: 7.5 INCHES INFEED DIAMETER: 6.75 INCHES REQUIRES A NEW AUGER ELECTRO-CRAFT BRU-500 SERVO DRIVE MODULE CART MOUNTED WITH CASTERS
|
🔒 Subscribe | |
|
|
HAAS-MEINCKE | SWM 2V |
HAAS-MEINCKE CONVEYOR DEPOSITOR - USED HAAS-MEINCKE SWM 2V CONVEYOR DEPOSITOR WITH: PREVIOUSLY USED TO MAKE CREAM FILLED SANDWICH COOKIES ONE (1) STIRRER WITH PARAMETER STIRRER CREAM CONVEYING SCREW TWO (2) CREAM PUMPS REMOTE E-STOP HAAS CAN 2416 ALLEN BRADLEY CONTROLS ELECTRICALS: PHASE: 3 VOLTAGE: 460 FREQUENCY: 60 HERTZ AMPERAGE: 20 NO QUICK COIL AIR LINES MISSING (1) SMALL COVER PANEL LOWER BACK SIDE MISSING MOUNTING BRACKETS TO (1) FRONT SIDE UPPER COVER SHIELD DOOR
|
🔒 Subscribe | |
|
|
HAYSSEN | SERVO |
HAYSSEN SERVO UPGRADED VERTICAL FORM FILL SEAL - USED CMD PACKAGING AND HAYSSEN VERTICAL FORM FILL SEAL WITH: SEAL BAR WIDTH: 9 INCHES KNIFE END SEAL DISCHARGE HEIGHT: 11 INCHES POWERED FILM PULL DOWN BELTS POWERED FILM UNWIND FILM WIDTH: 15 INCHES ALLEN-BRADLEY PANELVIEW 600 HMI ALLEN-BRADLEY 5561LOGIX CONTROLS PREVIOUSLY USED WITH AN AUGER FILLER
|
🔒 Subscribe | |
|
|
USED PALLET OF MRO WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 30 INCHES
|
🔒 Subscribe | |||
|
|
MARSHALLING | PANEL |
[MARSHALLING PANEL] OVERALL DIMENSIONS: LENGTH: 85 INCHES WIDTH: 60 INCHES HEIGHT: 53 INCHES
|
🔒 Subscribe | |
|
|
SAFELINE | 51" WIDE X 3" TALL SLAB METAL DETECTOR |
SAFELINE 51" WIDE X 3" TALL SLAB METAL DETECTOR - USED SAFELINE SLAB METAL DETECTOR WITH: APERTURE DIMENSIONS: 51 INCHES WIDE X 3 INCHES TALL CONVEYOR DIMENSIONS: 54 INCHES LONG X 49.5 INCHES WIDE CONVEYOR HEIGHT: 34.5 INCHES PLASTIC MAT-TOP CONVEYOR BELT RETRACTING CONVEYOR PRODUCT REJECT SEALED MOTOR HOUSING STAINLESS STEEL FRAME CASTERS OAD: LENGTH: 60 INCHES WIDTH: 72 INCHES HEIGHT: 42 INCHES DESIGNED TO DETECT: 1.8MM NONFERROUS 1.5MM FERROUS 2.25MM STAINLESS
|
🔒 Subscribe | |
|
|
COMBI | 2EZSB |
COMBI 2EZSB TAPE BOTTOM CASE ERECTOR - USED COMBI 2EZSB CASE ERECTOR WITH: SIDE BELT DRIVE CASE ERECTING MACHINE TAPE BOTTOM SEAL 3 INCH TAPE HEAD OUTPUT: APPROXIMATELY 15 CASES PER MINUTE, DEPENDING ON CASE DIMENSIONS CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 6 INCHES WIDE X 5 INCHES TALL MAXIMUM: 24 INCHES LONG X 16 INCHES WIDE X 18 INCHES TALL EZ LOAD WALK-IN CASE MAGAZINE HEAVY-DUTY WELDED STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 |
[AUTOBAG SPRINT 60] SIDEPOUCH STAINLESS STEEL BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
METTLER TOLEDO | CHECKMATE 2 3 |
METTLER TOLEDO CHECKMATE 2 3 BELT CHECKWEIGHER WITH: INFEED: LENGTH: 20 INCHES WIDTH: 11.5 INCHES WEIGHING BELT: LENGTH: 20 INCHES WIDTH: 11.5 INCHES OUTFEED: LENGTH: 20 INCHES WIDTH: 11.5 INCHES SWEEP ARM REJECT EMERGENCY E STOP
|
🔒 Subscribe | |
|
|
HYTROL | ROLLER CONVEYOR |
HYTROL 15" WIDE X 223" LONG ROLLER CONVEYOR - USED HYTROL BELT DRIVEN ROLLER CONVEYOR WITH: CONVEYOR DIMENSIONS: 15 INCHES LONG X 223 INCHES LONG ROLLER CENTERS: 3 INCHES PREVIOUSLY CEILING MOUNTED
|
🔒 Subscribe | |
|
|
SACMI | FORMSLEEVER 500 |
SACMI FORMSLEEVER 500 LABELER. SPEEDS: UP TO 866 PER MINUTE. SUITABLE FILMS: PET, OPS, PO, PVC, PLA, OPP AND OTHERS. MAXIMUM LABEL SIZE: 175MM/6.9 INCHES. MINIMUM LABEL SIZE: 30MM/1.2 INCHES. MAXIMUM CONTAINER SIZE: 350MM/13.8 INCHES. MINIMUM CONTAINER SIZE: 150MM/5.9 INCHES. MAIN TURRET: CONTAINERS ARE ROTATED AROUND AXIS SO LABELS CAN BE APPLIED. TUBULAR SLEEVE APPLIED. SLEEVE CAN BE FULL OR PARTIAL BODY. LABELING UNIT: PHOTOCELL NEAR INLET WHEEL GENERATES SIGNAL AND STARTS LABELING PROCESS. LABELING TAPE TRANSFERRED FROM REEL TO DRIVE ROLLER. DRIVE ROLLER ADJUSTS TO MAKE SURE CUTTING POINT IS CORRECT. SOLVENT APPLIED TO LABEL AND SLEEVE IS SEALED. REEL UNWINDER. CONTROL CABINET. ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ. OPERATION: AUTOMATICALLY LOADS, APPLIES WRAP AROUND LABELS TO CONTAINERS, AND THEN UNLOADS THEM. CONTAINERS ENTER ON A SINGLE ROW CONVEYOR AND TRANSFERRED TO THE MAIN TURRET.
|
🔒 Subscribe | |
|
|
ECONOSEAL | 7416 |
ECONOSEAL 7416 HORIZONTAL HANDLOAD CARTONER W GLUE SYSTEM - USED ECONOSEAL CARTONER WITH: SPEEDS: UP TO 40 CARTONS PER MINUTE DEPENDING ON MATERIALS AND APPLICATION 4 CHAIN ADJUSTABLE 15 INCH CENTERS CARTON SIZE RANGE: MINIMUM (INCHES): 2 LONG X 0.5 WIDE X 5 DEEP MAXIMUM (INCHES): 10 LONG X 3.5 WIDE X 12 DEEP LOADING ZONE: LENGTH: 58 INCHES HEIGHT: 33 INCHES DISCHARGE HEIGHT: 33 INCHES DUAL ROTARY SUCTION PICK OFF GRAVITY FED MAGAZINE NORDSON 3100V HOT GLUE SYSTEM E STOP PUSH BUTTON UNIT MOUNTED ON CASTERS ELECTRICAL: VOLTS: 220 FREQUENCY: 60 HZ PHASE 1 AIRE REQUIREMENTS: 80 PSI STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
MULTI-CONVEYOR | MASS FLOW BELT CONVEYOR |
13'L X 8'W MULTI-CONVEYOR MASS FLOW BELT CONVEYOR WITH 2 HP MOTOR - USED MULTI-CONVEYOR MASS FLOW PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: 8 FEET WIDE X 13 FEET LONG CONVEYOR HEIGHT: 34 INCHES 2 HORSEPOWER MOTOR HUBBELL POWER DISCONNECT SWITCH ADJUSTABLE CONVEYOR LEGS PAINTED, MILD STEEL FRAME
|
🔒 Subscribe | |
|
|
ECONOSEAL | E2000 |
[USED] ECONOSEAL E2000 CARTONER WITH INFEED CONVEYOR HORIZONTAL CARTONER WITH: SPEED: UP TO 1500 CARTONS PER HOUR DEPENDING ON CARTON SIZE AND APPLICATION MINIMUM CARTON DIMENSIONS: LENGTH: 1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES MAXIMUM CARTON DIMENSIONS: LENGTH: 12 INCHES WIDTH: 4 INCHES HEIGHT: 12 INCHES INFEED HEIGHT: 38 INCHES DISCHARGE HEIGHT: 32.5 INCHES BUCKET DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.5 INCHES HEIGHT: 4.5 INCHES BUCKET CENTERS: 5.5 INCHES MAGAZINE DIMENSIONS: LENGTH: 9.5 INCHES WIDTH: 8.5 INCHES AIR REQUIREMENTS: 80 PSI ELECTRICAL: 1 PHASE, 60 HZ, 220 VOLTS PREVIOUSLY USED IN BEVERAGE APPLICATION
|
🔒 Subscribe | |
|
|
STAINLESS STEEL HOPPER WITH ELEVATING CONVEYOR - USED HOPPER WITH: DIMENSIONS: LENGTH: 60 INCHES WIDTH: 44 INCHES CONVEYOR DIMENSIONS: INCLINE HEIGHT: 70 INCHES STRAIGHT TOP LENGTH: 30 INCHES WIDTH: 12 INCHES CLEATS: CENTERS: 13 INCHES HEIGHT: 2 INCHES INFEED HEIGHT: 50 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
URANIA | 5000P |
URANIA 5000P VERTICAL CONTINUOUS BAND BAG SEALER - USED URANIA BAG SEALER WITH: MODEL: 5000 P SPEED RANGE: 100 TO 600 INCHES PER MINUTE (DEPENDING ON BAG THICKNESS) CAPABLE OF VERTICAL OR HORIZONTAL SEAL SEALING BELTS: TEFLON COATED FIBERGLASS TEMPERATURE OF OPERATION: 100 TO 300 DEGREES CELSIUS ALLEN BRADLEY PANELVIEW PLUS 1000 304 STAINLESS STEEL CASTERS ELECTRICALS: 115 VAC / 60 HZ / 15 A
|
🔒 Subscribe | |
|
|
BELCOR | BEL-651 |
BELCOR BEL-651 TAPE BOTTOM SEAL CASE ERECTOR WITH: OUTPUT: 15 CASES PER MINUTE, DEPENDING ON CASE SIZE BLANK CASE MAGAZINE: 51 INCHES LONG X 26 INCHES WIDE CASE SIZES: LENGTH: MINIMUM: 10 INCHES MAXIMUM: 22 INCHES WIDTH: MINIMUM: 6 INCHES MAXIMUM: 16 INCHES DEPTH: MINIMUM: 9.5 INCHES MAXIMUM: 24 INCHES CURRENTLY SET TO RUN: 9.75 INCH WIDE X 20 INCH LONG X 16 INCH TALL CASES HAND CRANK ADJUSTMENTS ALLEN-BRADLEY MICROLOGIX 1000 PLC 90 PSI OF AIR USES A PIN AND DOME SYSTEM TO OPEN CASES INSTEAD OF THE COMMON VACUUM METHOD
|
🔒 Subscribe | |
|
|
GRICE | GER-40 |
GRICE GER-40 CHEESE APPLICATOR WITH: SANITARY BLUE BELT STAINLESS STEEL CONSTRUCTION ELECTRICALS: VOLTAGE: 480 AMPERAGE: 20 PHASE: 3
|
🔒 Subscribe | |
|
|
DOBOY | MUSTANG IV |
DOBOY MUSTANG IV HORIZONTAL FLOW WRAPPER RIGHT DIRECTION OF TRAVEL LUGGED INFEED MAX FILM WEB WIDTH: 20 INCHES END SEAL: 1-UP ROTARY JAWS SMOOTH BELT CONVEYOR OUTFEED ELECTRICAL REQUIREMENTS: 220V 60HZ PHASE 3 20 AMPS PAINTED MILD STEEL FRAME WITH STAINLESS STEEL CONTACT PARTS
|
🔒 Subscribe | |
|
|
FEDCO | CCE-24 SS |
24" W CHOCOLATE ENROBER WITH: INFEED/OUTFEED HEIGHT FROM FLOOR: 37.5 INCHES CONVEYOR TOTAL DIMENSIONS (INCHES): 72 LONG X 18 WIDE OUTFEED CONVEYOR DIMENSIONS (INCHES): 53 LONG X 18 WIDE INFEED CONVEYOR DIMENSIONS (INCHES): 18 LONG X 18 WIDE RE-CIRCULATION TUBE DIAMETER: 3 INCHES/4.5 INCHES STAINLESS STEEL FOOD GRADE
|
🔒 Subscribe | |
|
|
QUADREL | VERSALINE |
QUADREL VERSALINE VERTICAL ROLLER LABELER WITH: MAXIMUM SPEED: UP TO 250 BOTTLES PER MINUTE, DEPENDING ON APPLICATION DISPENSING SPEED: 1,200 INCHES PER MINUTE CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 4.5 INCHES HEIGHT: 34 INCHES MAXIMUM PRODUCT HEIGHT: 12 INCHES WEB WIDTH: 7 INCHES MAXIMUM LABEL WIDTH: 6 7/8 INCHES TOUCHSCREEN CONTROLS (50) PROGRAMMABLE PRODUCT PRESETS AC VARIABLE SPEED FREQUENCY DRIVES STAINLESS STEEL FRAME ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
CONTINENTAL CAN CO. | 24-DS |
[CONTINENTAL CAN CO. 24-DS CLOSING MACHINE] SET UP FOR 4.25-INCH DIAMETER CANS WORKING HEIGHT CLEARANCE: 4.5 INCHES OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 44 INCHES HEIGHT: 80 INCHES HORSEPOWER: 1 ELECTRICAL REQUIREMENTS: 115-208-230 VOLTS/ 1 PHASE
|
🔒 Subscribe | |
|
|
LAUDENBERG | FBL 22 HFFS |
[LAUDENBERG FBL 22 HFFS] INTERMITTENT, ROTARY HORIZONTAL POUCH FORMING, FILLING, AND SEALING MACHINE FORMS AND FILLS POUCH UPSIDE DOWN, TOP OF THE FINISHED POUCH IS SEALED FIRST POUCH DIMENSIONS: MINIMUM: 4.72 INCHES WIDE X 3.93 INCHES LONG MAXIMUM: 7.4 INCHES WIDE X 13 INCHES LONG CURRENT POUCH SIZE: APPROXIMATELY 6 INCHES WIDE X 11 INCHES LONG CURRENT FILM WIDTH: 22 INCHES OUTPUT: UP TO 200 POUCHES PER MINUTE, DEPENDING ON PRODUCT, FILL METHOD, AND POUCH SIZE RESEALABLE ZIPPER APPLICATOR GAS FLUSH PRINT REGISTRATION POUCH HANGER HOLE PUNCH SERVO MOTOR DRIVEN FOOD GRADE, STAINLESS STEEL CONSTRUCTION ALLEN-BRADLEY LOGIX5561 CONTROLS REXROTH INDRAMAT SERVO MOTOR DRIVES ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI
|
🔒 Subscribe | |
|
|
PEERLESS | WPD0628CA |
PEERLESS WPD0628CA STAINLESS STEEL 6-SPOT DEPOSITOR WITH PROGRAMMABLE PORTIONING - USED FEDCO PEERLESS WPD0628CA 6-SPOT DEPOSITOR WITH: HOPPER DIMENSIONS: LENGTH:46 INCHES WIDTH: 31 INCHES DEPTH: 19 INCHES CANTILEVER DESIGN, SITS OVER AN EXISTING CONVEYOR LINE HEIGHT CLEARANCE: 37 INCHES DEPOSITOR CENTERS ARE 4.5" PROGRAMMABLE PORTIONING ALLEN-BRADLEY MICROLOGIX1500 CONTROLS ALLEN-BRADLEY PANELVIEW 300 MICRO HMI ELECTRICAL REQUIREMENTS: 115 VOLTS 60 HZ SINGLE PHASE STAINLESS STEEL CONSTRUCTION ON CASTER WHEELS CAN DO PARTICULATES BUT THE BATTER HAS TO BE FLOWABLE
|
🔒 Subscribe |
CONTINENTAL CAN CO. PANAMA
FOOD PROCESSING AND RESTAURANT EQUIPMENT
[CONTINENTAL CAN CO. PANAMA CAN SEAMER] WITH: SCREW PITCH: 6 INCHES SCREW LENGTH: 22 INCHES DIAMETER...
Hammer Price:
🔒
RAPAT V-BELT CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
RAPAT V-BELT CONVEYOR WITH: CONVEYOR DIMENSIONS: (2) 7 INCH WIDTH BELTS LENGTH: 168 INCHES WIDTH: 12...
Hammer Price:
🔒
PETERS LINE 3
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PETERS BISCUIT & CRACKER MACHINERY LINE 3 - USED PETERS BISCUIT & CRACKER MACHINERY WITH: SANDWICHIN...
Hammer Price:
🔒
LAUDENBERG FBL 22 HFFS
PACKAGING EQUIPMENT
LAUDENBERG FBL 22 HFFS POUCH MACHINE WITH ZIPPER - USED LAUDENBERG FBL 22 HFFS POUCH MACHINE WITH: I...
Hammer Price:
🔒
2018 VEROPAK LTD. DENESTER
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2018 VEROPAK LTD. DENESTER STAINLESS STEEL PICK-AND-PLACE PAPER CUP DISPENSER WITH: MANUFACTURER: VE...
Hammer Price:
🔒
BERTOLASO SIGMA 605/605
CHEMICAL PROCESSING EQUIPMENT
BERTOLASO SIGMA 605/605 STAINLESS STEEL ROTARY CAPPER - USED BERTOLASO SIGMA STAINLESS STEEL ROTARY ...
Hammer Price:
🔒
BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR
PACKAGING EQUIPMENT
BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR WITH: 2 INCH TAPE HEAD BOTTOM SEAL ALLEN-BRADLEY ...
Hammer Price:
🔒
AUTOBAG SPRINT 60
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH STAINLESS STEEL BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: ...
Hammer Price:
🔒
HAYSSEN ULTIMA
PACKAGING EQUIPMENT
HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER ONLY - USED HAYSSEN ULTIMA WITH: OUTPUT: UP TO 100...
Hammer Price:
🔒
UBE 175
PACKAGING EQUIPMENT
UBE MODEL 175 STAINLESS STEEL BREAD OVERWRAPPER - USED UBE MODEL 175 OVERWRAPPER WITH: INFEED/OUTFEE...
Hammer Price:
🔒
K&R PBI POLY BAG INSERTER AND TAPE CASE ERECTOR
PACKAGING EQUIPMENT
[K&R PBI] POLY BAG INSERTER AND TAPE CASE ERECTOR WITH: FUNCTION: FEED/ERECT K/D CASE FROM CASE MAGA...
Hammer Price:
🔒
MISC
USED PALLET OF MRO WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 37 INCHES...
Hammer Price:
🔒
MISC
(2) AIR INLET BOXES WITH BIRD SCREENS - (2) USED AIR INLET BOXES WITH BIRD SCREENS WITH: FIRST AIR I...
Hammer Price:
🔒
CROWN FOOD EC-10
FOOD PROCESSING AND RESTAURANT EQUIPMENT
CROWN FOOD 10 GALLON EC-10 TILTING STEAM KETTLE - USED CROWN FOODS TILTING STEAM KETTLE WITH: CAPACI...
Hammer Price:
🔒
FORMOST FUJI FW3400A-5
PACKAGING EQUIPMENT
FORMOST FUJI FW3400A-5 HORIZONTAL FLOW WRAPPER - USED FORMOST FUJI FW3400A-5 FLOW WRAPPER WITH: PRIN...
Hammer Price:
🔒
NERI RO800
PACKAGING EQUIPMENT
NERI RO800 AUTOMATIC STAINLESS STEEL ROTARY CUT STACK AND ROLL FED LABELER - USED NERI RO800 LABELER...
Hammer Price:
🔒
CLIMAX DP4-1/LD
PACKAGING EQUIPMENT
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONS...
Hammer Price:
🔒
TRIPACK ST-1 7.5
CHEMICAL PROCESSING EQUIPMENT
TRIPACK ST-1 7.5 STAINLESS STEEL STEAM TUNNEL - USED TRIPACK ST-1 7.5 STEAM TUNNEL WITH: APERTURE DI...
Hammer Price:
🔒
SHANKLIN F-5
PACKAGING EQUIPMENT
[SHANKLIN F-5] SIDE SEAL AUTOMATIC HIGH SPEED SHRINK WRAPPER W/ LUGGED INFEED - SHANKLIN SIDE SEALER...
Hammer Price:
🔒
ISHIDA DACS-V-012-SI/WP-N
FOOD PROCESSING AND RESTAURANT EQUIPMENT
[ISHIDA DACS-V-012-SI/WP-N] BELT CHECKWEIGHER WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9...
Hammer Price:
🔒
PRO PACK SYSTEMS PRO SEALER TOP ONLY
PACKAGING EQUIPMENT
PRO PACK SYSTEMS PRO SEALER TOP ONLY CASE TAPER WITH: TOP ONLY CASE TAPER SEALER 2 INCH TAPE HEAD (D...
Hammer Price:
🔒
MATEER-BURT 1800B
PACKAGING EQUIPMENT
[MATEER-BURT 1800B] SERVO DRIVEN AUGER FILLER - USED MATEER-BURT 1800B AUGER FILLER WITH: SERVO MOTO...
Hammer Price:
🔒
HAAS-MEINCKE SWM 2V
FOOD PROCESSING AND RESTAURANT EQUIPMENT
HAAS-MEINCKE CONVEYOR DEPOSITOR - USED HAAS-MEINCKE SWM 2V CONVEYOR DEPOSITOR WITH: PREVIOUSLY USED ...
Hammer Price:
🔒
HAYSSEN SERVO
PACKAGING EQUIPMENT
HAYSSEN SERVO UPGRADED VERTICAL FORM FILL SEAL - USED CMD PACKAGING AND HAYSSEN VERTICAL FORM FILL S...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
USED PALLET OF MRO WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 30 INCHES...
Hammer Price:
🔒
MARSHALLING PANEL
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
[MARSHALLING PANEL] OVERALL DIMENSIONS: LENGTH: 85 INCHES WIDTH: 60 INCHES HEIGHT: 53 INCHES...
Hammer Price:
🔒
SAFELINE 51" WIDE X 3" TALL SLAB METAL DETECTOR
TEST, MEASUREMENT & QUALITY EQUIPMENT
SAFELINE 51" WIDE X 3" TALL SLAB METAL DETECTOR - USED SAFELINE SLAB METAL DETECTOR WITH: APERTURE D...
Hammer Price:
🔒
COMBI 2EZSB
PACKAGING EQUIPMENT
COMBI 2EZSB TAPE BOTTOM CASE ERECTOR - USED COMBI 2EZSB CASE ERECTOR WITH: SIDE BELT DRIVE CASE EREC...
Hammer Price:
🔒
AUTOBAG SPRINT 60
PACKAGING EQUIPMENT
[AUTOBAG SPRINT 60] SIDEPOUCH STAINLESS STEEL BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA...
Hammer Price:
🔒
METTLER TOLEDO CHECKMATE 2 3
TEST, MEASUREMENT & QUALITY EQUIPMENT
METTLER TOLEDO CHECKMATE 2 3 BELT CHECKWEIGHER WITH: INFEED: LENGTH: 20 INCHES WIDTH: 11.5 INCHES WE...
Hammer Price:
🔒
HYTROL ROLLER CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
HYTROL 15" WIDE X 223" LONG ROLLER CONVEYOR - USED HYTROL BELT DRIVEN ROLLER CONVEYOR WITH: CONVEYOR...
Hammer Price:
🔒
SACMI FORMSLEEVER 500
PACKAGING EQUIPMENT
SACMI FORMSLEEVER 500 LABELER. SPEEDS: UP TO 866 PER MINUTE. SUITABLE FILMS: PET, OPS, PO, PVC, PLA,...
Hammer Price:
🔒
ECONOSEAL 7416
PACKAGING EQUIPMENT
ECONOSEAL 7416 HORIZONTAL HANDLOAD CARTONER W GLUE SYSTEM - USED ECONOSEAL CARTONER WITH: SPEEDS: UP...
Hammer Price:
🔒
MULTI-CONVEYOR MASS FLOW BELT CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
13'L X 8'W MULTI-CONVEYOR MASS FLOW BELT CONVEYOR WITH 2 HP MOTOR - USED MULTI-CONVEYOR MASS FLOW PL...
Hammer Price:
🔒
ECONOSEAL E2000
PACKAGING EQUIPMENT
[USED] ECONOSEAL E2000 CARTONER WITH INFEED CONVEYOR HORIZONTAL CARTONER WITH: SPEED: UP TO 1500 CAR...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
STAINLESS STEEL HOPPER WITH ELEVATING CONVEYOR - USED HOPPER WITH: DIMENSIONS: LENGTH: 60 INCHES WID...
Hammer Price:
🔒
URANIA 5000P
PACKAGING EQUIPMENT
URANIA 5000P VERTICAL CONTINUOUS BAND BAG SEALER - USED URANIA BAG SEALER WITH: MODEL: 5000 P SPEED ...
Hammer Price:
🔒
BELCOR BEL-651
PACKAGING EQUIPMENT
BELCOR BEL-651 TAPE BOTTOM SEAL CASE ERECTOR WITH: OUTPUT: 15 CASES PER MINUTE, DEPENDING ON CASE SI...
Hammer Price:
🔒
GRICE GER-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
GRICE GER-40 CHEESE APPLICATOR WITH: SANITARY BLUE BELT STAINLESS STEEL CONSTRUCTION ELECTRICALS: VO...
Hammer Price:
🔒
DOBOY MUSTANG IV
PACKAGING EQUIPMENT
DOBOY MUSTANG IV HORIZONTAL FLOW WRAPPER RIGHT DIRECTION OF TRAVEL LUGGED INFEED MAX FILM WEB WIDTH:...
Hammer Price:
🔒
FEDCO CCE-24 SS
FOOD PROCESSING AND RESTAURANT EQUIPMENT
24" W CHOCOLATE ENROBER WITH: INFEED/OUTFEED HEIGHT FROM FLOOR: 37.5 INCHES CONVEYOR TOTAL DIMENSION...
Hammer Price:
🔒
QUADREL VERSALINE
PACKAGING EQUIPMENT
QUADREL VERSALINE VERTICAL ROLLER LABELER WITH: MAXIMUM SPEED: UP TO 250 BOTTLES PER MINUTE, DEPENDI...
Hammer Price:
🔒
CONTINENTAL CAN CO. 24-DS
PACKAGING EQUIPMENT
[CONTINENTAL CAN CO. 24-DS CLOSING MACHINE] SET UP FOR 4.25-INCH DIAMETER CANS WORKING HEIGHT CLEARA...
Hammer Price:
🔒
LAUDENBERG FBL 22 HFFS
PACKAGING EQUIPMENT
[LAUDENBERG FBL 22 HFFS] INTERMITTENT, ROTARY HORIZONTAL POUCH FORMING, FILLING, AND SEALING MACHINE...
Hammer Price:
🔒
PEERLESS WPD0628CA
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PEERLESS WPD0628CA STAINLESS STEEL 6-SPOT DEPOSITOR WITH PROGRAMMABLE PORTIONING - USED FEDCO PEERLE...
Hammer Price:
🔒