Surplus to the Ongoing Operations of Padagis Perrigo
Category: PHARMACEUTICAL MANUFACTURING EQUIPMENT
Total Lots:
142
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
APV | W 30/50 |
APV MODEL W 30/50 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 280 GALLONS PER MINUTE, 130 HEAD FEET @ 3500 RPM. APPROXIMATE 3" INLET, 2-1/2" OUTLET. APPROXIMATE 6.3" DIAMETER IMPELLAR. DRIVEN BY A 20 HP, 3/60/230/460 VOLT, 3525 RPM MOTOR.
|
🔒 Subscribe | |
|
|
APV | W 30/50 |
APV W 30/50 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 280 GALLONS PER MINUTE, 130 HEAD FEET @ 3500 RPM. APPROXIMATE 3" INLET, 2-1/2" OUTLET. APPROXIMATE 6.3" DIAMETER IMPELLAR. DRIVEN BY A 20 HP, 3/60/230/460 VOLT, 3525 RPM MOTOR.
|
🔒 Subscribe | |
|
|
PDC | 75-M2 |
PDC 75-M2 HIGH SPEED TAMPER EVIDENT NECK BANDER. CAPABLE OF SPEEDS UP TO 300 CONTAINERS PER MINUTE. BAND SIZE RANGE: 3/8" - 3" (DIAMETER) X 3/4" - 4" (HEIGHT). HAS WORM-SCREW INFEED, VERTICAL PERFORATION, STATIC ELIMINATOR, LOW FILM SENSOR, NO BAND DETECTION. UNIT WAS LAST SET UP FOR 8 OZ BOTTLES IN PHARMACEUTICAL PACKAGING OPERATION. 10 AMPS. 1 PH, 240V. MACHINE CAN BE RETOOLED AND SET TO SIZE PER APPLICATION.
|
🔒 Subscribe | |
|
|
STERIS (AMSCO) | CENTURY SERIES SINGLE DOOR STERILIZER |
STERIS (AMSCO) CENTURY SERIES SINGLE DOOR STERILIZER, 15 GPM. CHAMBER SIZE: 34" WIDE X 52" TALL X 66" DEEP WITH PREVAC. CHAMBER AND JACKET RATED 45PSI AT -20 TO 300 DEGREES F. DRIVEN BY A 2HP 3/60/208-240/460V, 3450RPM MOTOR, THROUGH A REDUCER. HAS ALLEN BRADLEY LOGIC 53 PLC CONTROLS WITH ALLEN BRADLEY PANELVIEW 600 HMI. NEVER INSTALLED IN PRODUCTION. MOUNTED ON A CARBON STEEL FRAME WITH CASTERS. NATIONAL BOARD # 87274. S/N: 0803056
|
🔒 Subscribe | |
|
|
SOUTHWORTH PRODUCTS | ROLL C PALLETPAL ROLL-ON LEVELER |
ROLL C PALLETPAL ROLL-ON LEVELER WITH TURNTABLE. PLATFORM 44" X 48". LOAD CAPACITY 2,500 LBS. LOWERED HEIGHT 2", RAISED HEIGHT 30". RAISE TIME 30 SECONDS. S/N: 59359-01/M059359-100-01. 1/60/115 VOLT.
|
🔒 Subscribe | |
|
|
SULLAIR | DMD-40 |
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VESSEL HEIGHT 40", VESSEL THICKNESS 1/3". PURGE EXHAUST MUFFLER 3/4". INLET-OUTLET CONNECTION - INCHES 1 1/2" NPT; RELIEF VALVE SETTING (PSI) 200; BED VELOCITY (FPM) 60; SOUND MAX DBA 85; PURGE SOURCE DRY AIR; PURGE ADJUST CHECK VALVE; NEMA CYCLE (MIN) 5 MIN; DRYING TIME (MIN) 2.5 MINUTES; REGENERATION TIME (MIN) 2 MINUTES; REPRESSURIZATION TIME (MIN) 30 SECONDS; PERFORMANCE DATA: MAX AMBIENT TEMP (DEG. F/ DEG. C) 122/50; MIN AMBIENT TEMP (DEG. F/ DEG. C) 34 / 1.6 ; MAX INLET TEMP (DEG. F/ DEG. C) 122/50; MAX RATED AIR FLOW AT 100 DEG. F (38 DEG. C) ; INLET, 100 PSIG (7 BARG) AND 100 DEG. F (38 DEG. C) AMB 40; DRYER DELTA P 2; MIN PRESSURE (PSI/BAR) 58 / 4.0; MAX PRESSURE (PSI/BAR) 200 / 16; AVG PURGE RATE (AT -40 DEG. F) 15%; AVG PURGE RATE (AT -100 DEG. F) 20%; ELECTRICAL DATA: STANDARD VOLTAGE 80-240V/ 50-60HZ; FULL LOAD AMPS 1; MIN. CIRCUIT AMPACITY 2; INPUT POWER KW 0.075; UNIT AVERAGE KW 0.06; DIMENSIONS & WEIGHT DATA: SINGLE VESSEL DESICCANT-LBS 20.9; SHIP WEIGHT 164.5; LENGTH-INCHES 16.1; WIDTH-INCHES 17.7; HEIGHT-INCHES 49.2; UNIT WEIGHT-LBS 143; TOTAL DESICCANT (LBS) 41.8. S/N: 4318MD00598
|
🔒 Subscribe | |
|
|
SULLAIR | DMD-40 |
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VESSEL HEIGHT 40", VESSEL THICKNESS 1/3". PURGE EXHAUST MUFFLER 3/4". INLET-OUTLET CONNECTION - INCHES 1 1/2" NPT; RELIEF VALVE SETTING (PSI) 200; BED VELOCITY (FPM) 60; SOUND MAX DBA 85; PURGE SOURCE DRY AIR; PURGE ADJUST CHECK VALVE; NEMA CYCLE (MIN) 5 MIN; DRYING TIME (MIN) 2.5 MINUTES; REGENERATION TIME (MIN) 2 MINUTES; REPRESSURIZATION TIME (MIN) 30 SECONDS; PERFORMANCE DATA: MAX AMBIENT TEMP (DEG. F/ DEG. C) 122/50; MIN AMBIENT TEMP (DEG. F/ DEG. C) 34 / 1.6 ; MAX INLET TEMP (DEG. F/ DEG. C) 122/50; MAX RATED AIR FLOW AT 100 DEG. F (38 DEG. C) ; INLET, 100 PSIG (7 BARG) AND 100 DEG. F (38 DEG. C) AMB 40; DRYER DELTA P 2; MIN PRESSURE (PSI/BAR) 58 / 4.0; MAX PRESSURE (PSI/BAR) 200 / 16; AVG PURGE RATE (AT -40 DEG. F) 15%; AVG PURGE RATE (AT -100 DEG. F) 20%; ELECTRICAL DATA: STANDARD VOLTAGE 80-240V/ 50-60HZ; FULL LOAD AMPS 1; MIN. CIRCUIT AMPACITY 2; INPUT POWER KW 0.075; UNIT AVERAGE KW 0.06; DIMENSIONS & WEIGHT DATA: SINGLE VESSEL DESICCANT-LBS 20.9; SHIP WEIGHT 164.5; LENGTH-INCHES 16.1; WIDTH-INCHES 17.7; HEIGHT-INCHES 49.2; UNIT WEIGHT-LBS 143; TOTAL DESICCANT (LBS) 41.8. S/N: 4318MD00605
|
🔒 Subscribe | |
|
|
SULLAIR | DMD-40 |
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VESSEL HEIGHT 40", VESSEL THICKNESS 1/3". PURGE EXHAUST MUFFLER 3/4". INLET-OUTLET CONNECTION - INCHES 1 1/2" NPT; RELIEF VALVE SETTING (PSI) 200; BED VELOCITY (FPM) 60; SOUND MAX DBA 85; PURGE SOURCE DRY AIR; PURGE ADJUST CHECK VALVE; NEMA CYCLE (MIN) 5 MIN; DRYING TIME (MIN) 2.5 MINUTES; REGENERATION TIME (MIN) 2 MINUTES; REPRESSURIZATION TIME (MIN) 30 SECONDS; PERFORMANCE DATA: MAX AMBIENT TEMP (DEG. F/ DEG. C) 122/50; MIN AMBIENT TEMP (DEG. F/ DEG. C) 34 / 1.6 ; MAX INLET TEMP (DEG. F/ DEG. C) 122/50; MAX RATED AIR FLOW AT 100 DEG. F (38 DEG. C) ; INLET, 100 PSIG (7 BARG) AND 100 DEG. F (38 DEG. C) AMB 40; DRYER DELTA P 2; MIN PRESSURE (PSI/BAR) 58 / 4.0; MAX PRESSURE (PSI/BAR) 200 / 16; AVG PURGE RATE (AT -40 DEG. F) 15%; AVG PURGE RATE (AT -100 DEG. F) 20%; ELECTRICAL DATA: STANDARD VOLTAGE 80-240V/ 50-60HZ; FULL LOAD AMPS 1; MIN. CIRCUIT AMPACITY 2; INPUT POWER KW 0.075; UNIT AVERAGE KW 0.06; DIMENSIONS & WEIGHT DATA: SINGLE VESSEL DESICCANT-LBS 20.9; SHIP WEIGHT 164.5; LENGTH-INCHES 16.1; WIDTH-INCHES 17.7; HEIGHT-INCHES 49.2; UNIT WEIGHT-LBS 143; TOTAL DESICCANT (LBS) 41.8. S/N: 4318MD00606
|
🔒 Subscribe | |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 3/4HP, 3/60/230/460 VOLT, 3450 RPM MOTOR. S/N: H-9332-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 3/4HP, 3/60/230/460 VOLT, 3450 RPM MOTOR. S/N: H-9331-95
|
🔒 Subscribe |
|
|
VIDEO JET | 1510 |
VIDEO JET 1510 INK JET CODER. CAPABILITY: LINES OF PRINT: 1 - 510 CHARACTERS PER INCH LINE SPEED: UP TO 914 FEET PER MINUTE CHARACTER HEIGHT: 0.079 - 0.40 INCHES (DEPENDING ON FONT)INK: DYE BASED INKS PRINTS:ALPHA-NUMERIC LINEAR BAR CODES DATA MATRIX CODES PRINT HEAD:HEATED LENGTH: 9.47 INCHES DIAMETER: 1.63 INCHES UMBILICAL: 9.75 FEET LONG X 0.91 INCHES DIAMETER CONTROLS: 5.7 INCH BACKLIT LCD DISPLAY WITH PC STYLE KEYBOARD MESSAGE STORAGE CAPABILITY: 100 PRESETS STAINLESS STEEL CONSOLE CONSTRUCTION MOUNTED ON STAINLESS STEEL STAND.
|
🔒 Subscribe | |
|
|
1995 | APV CREPACO | W40/20 |
1995 APV CREPACO W40/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 120 GALLONS PER MINUTE, 190 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 1.5" OUTLET. DRIVEN BY A 7.5HP, 3/60/230/460 VOLT, 3520 RPM MOTOR. S/N: H-9342-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 2HP, 3/60/208-230/460 VOLT, 3450 RPM MOTOR. S/N: H-9345-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 3HP, 3/60/208-230/460 VOLT, 3450 RPM MOTOR. S/N: H-9343-95
|
🔒 Subscribe |
|
|
1996 | AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) | NFBD-200 |
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS STEEL. S/N: 4402D
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9291-95
|
🔒 Subscribe |
|
|
DONALDSON |
USED-DONALDSON DUST COLLECTOR
|
🔒 Subscribe | ||
|
|
GARVERY | 36" DIAMETER |
GARVERY 36" DIAMETER STAINLESS STEEL ACCUMULATION TABLE
|
🔒 Subscribe | |
|
|
ILC DOVER / DOVERPAC |
ILC DOVER / DOVERPAC CONTAINMENT SYSTEM POWDER DRUM FILLING STATION. STAINLESS STEEL CONSTRUCTION. LAST USED IN NUTRACUTICAL OPERATION.
|
🔒 Subscribe | ||
|
|
SULLAIR | 16-75 |
SULLAIR 16-75 RECIPROCATING COMPRESSOR WITH 75HP MOTOR. HAS 60,531 HOURS ON IT. MAXIMUM PRESSURE RATING 110 PSIG.
|
🔒 Subscribe | |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9313-95
|
🔒 Subscribe |
|
|
BOHANAN | VERSIFIL |
BOHANAN VERSIFIL HARD GELATIN ENCAPSULATION MACHINE DESIGNED TO FILL CAPSULES AT A RATE OF 160 TO 700 CAPSULES PER MINUTE (FILL RATE DEPENDS ON TOOLING USED.)
|
🔒 Subscribe | |
|
|
VIDEO JET | 1510 |
VIDEO JET 1510 INK JET CODER. ED VIDEO JET INK JET CODER WITH:CAPABILITY:LINES OF PRINT: 1 - 510 CHARACTERS PER INCH LINE SPEED: UP TO 914 FEET PER MINUTE CHARACTER HEIGHT: 0.079 - 0.40 INCHES (DEPENDING ON FONT)INK: DYE BASED INKS PRINTS:ALPHA-NUMERIC LINEAR BAR CODES DATA MATRIX CODES PRINT HEAD:HEATED LENGTH: 9.47 INCHES DIAMETER: 1.63 INCHES UMBILICAL: 9.75 FEET LONG X 0.91 INCHES DIAMETER CONTROLS: 5.7 INCH BACKLIT LCD DISPLAY WITH PC STYLE KEYBOARD MESSAGE STORAGE CAPABILITY: 100 PRESETS STAINLESS STEEL CONSOLE CONSTRUCTION MOUNTED ON STAINLESS STEEL STAND.
|
🔒 Subscribe | |
|
|
LIGHTNIN | XD-30 |
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN BY 0.30HP, 3/60/50/208-220/440 VOLT, 1725/1450 RPM MOTOR. S/N: 95/31930-04
|
🔒 Subscribe | |
|
|
LIGHTNIN | XJ-30 |
LIGHTNIN XJ-30 AGITATOR. APPROXIMATE 5/8" DIAMETER X 24" LONG STAINLESS STEEL SHAFT WITH 3-BLADE TURBINE. DRIVEN BY 0.30HP, 3/60/50/208-220/440 VOLT, 1725/1450 RPM MOTOR. S/N: 95/31929-2.
|
🔒 Subscribe | |
|
|
LIGHTNIN | XD-30 |
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN BY 0.30HP, 3/60/50/208-220/440 VOLT, 1725/1450 RPM MOTOR. S/N: 95/31930-02
|
🔒 Subscribe | |
|
|
LIGHTNIN | XD-30 |
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN BY 0.30HP, 3/60/50/208-220/440 VOLT, 1725/1450 RPM MOTOR. S/N: 95/31930-03
|
🔒 Subscribe | |
|
|
2018 | PROTECH | AMSW10 |
2018 PROTECH AMSW10 MOTORIZED BOOT WASHER. 17" LONG X 9" WIDE BOOT AREA. 304 STAINLESS STEEL CONSTRUCTION. 0.2 HP MOTOR. 1/60/120 VOLT. S/N: AMSW-0047-2018
|
🔒 Subscribe |
|
|
LABEL-AIRE | 2111M |
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR CONTROLLED AND BLOWS THE LABELS ON WITH A BLAST OF AIR. APPLIES LABELS SIZED FROM 3/4" WIDE BY 3/4" LONG TO 4" WIDE BY 5.5" LONG. LABEL RANGE OF 4" X 5-1/2" WITH ACCURACY OF +/- 1/32". 12" O.D. ROLLS MAXIMUM ON 3" I.D. CORES. UP TO 20" ROLL WITH POWERED UNWIND. UNIT IS ON AN ADJUSTABLE STAND. 1/60/115 VOLT AND 80 PSI AIR REQUIRED.
|
🔒 Subscribe | |
|
|
1996 | AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) | NFBD-200 |
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS STEEL. S/N: 4402A
|
🔒 Subscribe |
|
|
1996 | AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) | NFBD-200 |
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS STEEL. S/N: 4402B
|
🔒 Subscribe |
|
|
LABEL-AIRE | 2111M |
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR CONTROLLED AND BLOWS THE LABELS ON WITH A BLAST OF AIR. APPLIES LABELS SIZED FROM 3/4" WIDE BY 3/4" LONG TO 4" WIDE BY 5.5" LONG. LABEL RANGE OF 4" X 5-1/2" WITH ACCURACY OF +/- 1/32". 12" O.D. ROLLS MAXIMUM ON 3" I.D. CORES. UP TO 20" ROLL WITH POWERED UNWIND. UNIT IS ON AN ADJUSTABLE STAND. 1/60/115 VOLT AND 80 PSI AIR REQUIRED.
|
🔒 Subscribe | |
|
|
HOOVER |
HOOVER INDUSTRIAL TOTE BIN, 304 STAINLESS STEEL. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CONE BOTTOM. OPENINGS TOP: 23" MANWAY WITH COVER, SIDE: 6" X 3" SIGHT GLASS. 6" CENTER BOTTOM OUTLET, NO VALVE. MOUNTED ON FRAME WITH CASTERS.
|
🔒 Subscribe | ||
|
|
SCHLUETER |
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG CONE BOTTOM. VIBRATOR BRACKET, REQUIRES VIBRATOR. OPENINGS TOP: (2) 6", (2) 2". 4" CENTER BOTTOM OUTLET. MOUNTED ON (4) LEGS.
|
🔒 Subscribe | ||
|
|
HOOVER |
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CONE BOTTOM. OPENINGS TOP: 23" MANWAY WITH COVER, SIDE: 6" X 3" SIGHT GLASS. 6" CENTER BOTTOM OUTLET WITH MANUAL BUTTERFLY VALVE. MOUNTED ON FRAME WITH CASTERS.
|
🔒 Subscribe | ||
|
|
HOOVER |
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CONE BOTTOM. OPENINGS TOP: 23" MANWAY WITH COVER, SIDE: 6" X 3" SIGHT GLASS. 6" CENTER BOTTOM OUTLET WITH MANUAL BUTTERFLY VALVE. MOUNTED ON FRAME WITH CASTERS.
|
🔒 Subscribe | ||
|
|
HOOVER |
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CONE BOTTOM. OPENINGS TOP: 23" MANWAY WITH COVER, SIDE: 6" X 3" SIGHT GLASS. 6" CENTER BOTTOM OUTLET, NO VALVE. MOUNTED ON FRAME WITH CASTERS.
|
🔒 Subscribe | ||
|
|
SCHLUETER |
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG CONE BOTTOM. VIBRATOR BRACKET, REQUIRES VIBRATOR. OPENINGS TOP: (2) 6", (2) 2". 4" CENTER BOTTOM OUTLET. MOUNTED ON (4) LEGS.
|
🔒 Subscribe | ||
|
|
SCHLUETER |
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG CONE BOTTOM. VIBRATOR BRACKET, REQUIRES VIBRATOR. OPENINGS TOP: (2) 6", (2) 2". 4" CENTER BOTTOM OUTLET. MOUNTED ON (4) LEGS.
|
🔒 Subscribe | ||
|
|
LABEL-AIRE | 2111M |
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR CONTROLLED AND BLOWS THE LABELS ON WITH A BLAST OF AIR. APPLIES LABELS SIZED FROM 3/4" WIDE BY 3/4" LONG TO 4" WIDE BY 5.5" LONG. LABEL RANGE OF 4" X 5-1/2" WITH ACCURACY OF +/- 1/32". 12" O.D. ROLLS MAXIMUM ON 3" I.D. CORES. UP TO 20" ROLL WITH POWERED UNWIND. UNIT IS ON AN ADJUSTABLE STAND. 1/60/115 VOLT AND 80 PSI AIR REQUIRED.
|
🔒 Subscribe | |
|
|
THERMO RAMSEY | ICORE AC8000 |
THERMO RAMSEY ICORE AC8000 CHECKWEIGHER CAPABLE OF SPEEDS FROM 20 TO 200 FEET PER MINUTE, DEPENDING ON PRODUCT AND APPLICATION. WEIGHT RANGE UP TO 7500 GRAMS WITH ACCURACIES OF +/- 1%. STAINLESS STEEL CONSTRUCTION, HAS A 9" LONG BELT INFEED, 20" LONG WEIGH CELL WITH SILENT CHAIN CONVEYOR, AIR REJECT, WITH CPU CONTROLS.
|
🔒 Subscribe | |
|
|
2015 | PERMASAN/VIATEC |
2015 PERMASAN/VIATEC APPROXIMATELY 44 GALLON OVS KOSHER STAINLESS STEEL TANK S/N: 76801. INCLUDES SPX LIGHTNIN AGITATOR MODEL XDA33, S/N 2939069 (2015).
|
🔒 Subscribe | |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 3/4HP, 3/60/230/460 VOLT, 3450 RPM MOTOR. S/N: H-9334-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 3/4HP, 3/60/230/460 VOLT, 3450 RPM MOTOR. S/N: H-9330-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | WI30/100 |
1995 APV CREPACO WI30/100 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 650 GALLONS PER MINUTE, 141 HEAD FEET @ 3500 RPM. APPROXIMATE 4" INLET, 3" OUTLET. DRIVEN BY A 25HP, 3/60/230/460 VOLT, 3535 RPM MOTOR. S/N: H-9323-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9295-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W40/20 |
1995 APV CREPACO W40/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 120 GALLONS PER MINUTE, 190 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 1.5" OUTLET. DRIVEN BY A 15HP, 3/60/230/460 VOLT, 3525 RPM MOTOR. S/N: H-9290-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9292-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9309-95
|
🔒 Subscribe |
|
|
1995 | APV CREPACO | W20/20 |
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HEAD FEET @ 3500 RPM. APPROXIMATE 2" INLET, 2" OUTLET. DRIVEN BY A 5HP, 3/60/230/460 VOLT, 3500 RPM MOTOR. S/N: H-9307-95
|
🔒 Subscribe |
APV W 30/50
TANKS, PUMPS & STORAGE EQUIPMENT
APV MODEL W 30/50 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 280 GALLONS PER MINUTE, 130 HEAD F...
Hammer Price:
🔒
APV W 30/50
TANKS, PUMPS & STORAGE EQUIPMENT
APV W 30/50 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 280 GALLONS PER MINUTE, 130 HEAD FEET @ 3...
Hammer Price:
🔒
PDC 75-M2
PHARMACEUTICAL MANUFACTURING EQUIPMENT
PDC 75-M2 HIGH SPEED TAMPER EVIDENT NECK BANDER. CAPABLE OF SPEEDS UP TO 300 CONTAINERS PER MINUTE. ...
Hammer Price:
🔒
STERIS (AMSCO) CENTURY SERIES SINGLE DOOR STERILIZER
PHARMACEUTICAL MANUFACTURING EQUIPMENT
STERIS (AMSCO) CENTURY SERIES SINGLE DOOR STERILIZER, 15 GPM. CHAMBER SIZE: 34" WIDE X 52" TALL X 66...
Hammer Price:
🔒
SOUTHWORTH PRODUCTS ROLL C PALLETPAL ROLL-ON LEVELER
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
ROLL C PALLETPAL ROLL-ON LEVELER WITH TURNTABLE. PLATFORM 44" X 48". LOAD CAPACITY 2,500 LBS. LOWERE...
Hammer Price:
🔒
SULLAIR DMD-40
AIR COMPRESSORS
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VE...
Hammer Price:
🔒
SULLAIR DMD-40
AIR COMPRESSORS
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VE...
Hammer Price:
🔒
SULLAIR DMD-40
AIR COMPRESSORS
SULLAIR DMD-40 REGENERATIVE AIR DRYER PRODUCT SERIES DESICCANT MODULAR DRYER. VESSEL DIAMETER 5", VE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
VIDEO JET 1510
PACKAGING EQUIPMENT
VIDEO JET 1510 INK JET CODER. CAPABILITY: LINES OF PRINT: 1 - 510 CHARACTERS PER INCH LINE SPEED: UP...
Hammer Price:
🔒
1995 APV CREPACO W40/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W40/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 120 GALLONS PER MINUTE, 190 H...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200
PACKAGING EQUIPMENT
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
GARVERY 36" DIAMETER
MISC
GARVERY 36" DIAMETER STAINLESS STEEL ACCUMULATION TABLE...
Hammer Price:
🔒
ILC DOVER / DOVERPAC
PACKAGING EQUIPMENT
ILC DOVER / DOVERPAC CONTAINMENT SYSTEM POWDER DRUM FILLING STATION. STAINLESS STEEL CONSTRUCTION. L...
Hammer Price:
🔒
SULLAIR 16-75
AIR COMPRESSORS
SULLAIR 16-75 RECIPROCATING COMPRESSOR WITH 75HP MOTOR. HAS 60,531 HOURS ON IT. MAXIMUM PRESSURE RAT...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
BOHANAN VERSIFIL
PHARMACEUTICAL MANUFACTURING EQUIPMENT
BOHANAN VERSIFIL HARD GELATIN ENCAPSULATION MACHINE DESIGNED TO FILL CAPSULES AT A RATE OF 160 TO 70...
Hammer Price:
🔒
VIDEO JET 1510
PACKAGING EQUIPMENT
VIDEO JET 1510 INK JET CODER. ED VIDEO JET INK JET CODER WITH:CAPABILITY:LINES OF PRINT: 1 - 510 CH...
Hammer Price:
🔒
LIGHTNIN XD-30
CHEMICAL PROCESSING EQUIPMENT
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN...
Hammer Price:
🔒
LIGHTNIN XJ-30
PHARMACEUTICAL MANUFACTURING EQUIPMENT
LIGHTNIN XJ-30 AGITATOR. APPROXIMATE 5/8" DIAMETER X 24" LONG STAINLESS STEEL SHAFT WITH 3-BLADE TUR...
Hammer Price:
🔒
LIGHTNIN XD-30
CHEMICAL PROCESSING EQUIPMENT
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN...
Hammer Price:
🔒
LIGHTNIN XD-30
CHEMICAL PROCESSING EQUIPMENT
LIGHTNIN XD-30 AGITATOR APPROXIMATE 1/2" DIAMETER X 32" LONG STAINLESS STEEL SHAFT, NO BLADE. DRIVEN...
Hammer Price:
🔒
2018 PROTECH AMSW10
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2018 PROTECH AMSW10 MOTORIZED BOOT WASHER. 17" LONG X 9" WIDE BOOT AREA. 304 STAINLESS STEEL CONSTRU...
Hammer Price:
🔒
LABEL-AIRE 2111M
PACKAGING EQUIPMENT
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR C...
Hammer Price:
🔒
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200
MISC
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS...
Hammer Price:
🔒
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200
PACKAGING EQUIPMENT
1996 AMERICAN PROCESS SYSTEMS (EIRICH MACHINE) NFBD-200 NON FILTERED BAG DUMP STATION, 304 STAINLESS...
Hammer Price:
🔒
LABEL-AIRE 2111M
PACKAGING EQUIPMENT
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR C...
Hammer Price:
🔒
HOOVER
MISC
HOOVER INDUSTRIAL TOTE BIN, 304 STAINLESS STEEL. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LON...
Hammer Price:
🔒
SCHLUETER
MISC
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG ...
Hammer Price:
🔒
HOOVER
MISC
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CON...
Hammer Price:
🔒
HOOVER
MISC
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CON...
Hammer Price:
🔒
HOOVER
MISC
HOOVER INDUSTRIAL TOTE BIN. APPROXIMATE 48" X 42" X 10" STRAIGHT SIDE X 28" LONG CONE. FLAT TOP, CON...
Hammer Price:
🔒
SCHLUETER
MISC
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG ...
Hammer Price:
🔒
SCHLUETER
MISC
SCHLUETER EDUCTOR / PUMP HOPPER, 304 STAINLESS STEEL, VERTICAL. APPROXIMATE 36" DIAMETER X 26" LONG ...
Hammer Price:
🔒
LABEL-AIRE 2111M
PACKAGING EQUIPMENT
LABEL-AIRE 2111M AIR BLOW LABELER. CAPABLE OF SPEEDS UP TO 1250" OF WEB PER MINUTE. MICROPROCESSOR C...
Hammer Price:
🔒
THERMO RAMSEY ICORE AC8000
PACKAGING EQUIPMENT
THERMO RAMSEY ICORE AC8000 CHECKWEIGHER CAPABLE OF SPEEDS FROM 20 TO 200 FEET PER MINUTE, DEPENDING ...
Hammer Price:
🔒
2015 PERMASAN/VIATEC
TANKS, PUMPS & STORAGE EQUIPMENT
2015 PERMASAN/VIATEC APPROXIMATELY 44 GALLON OVS KOSHER STAINLESS STEEL TANK S/N: 76801. INCLUDES SP...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO WI30/100
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO WI30/100 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 650 GALLONS PER MINUTE, 141...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W40/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W40/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 120 GALLONS PER MINUTE, 190 H...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒
1995 APV CREPACO W20/20
TANKS, PUMPS & STORAGE EQUIPMENT
1995 APV CREPACO W20/20 CENTRIFUGAL PUMP, STAINLESS STEEL. APPROXIMATE 105 GALLONS PER MINUTE, 95 HE...
Hammer Price:
🔒