Superior Liquidators Auction #31

M18 FUEL GEN II 18V Lithium-Ion Brushless Cordless 1/2 in. Hole Hawg Right Angle Drill (Tool-Only). Milwaukee M18 FUEL HOLE HAWG 1/2 in. Right Angle Drill delivers the next generation of right-angle drill performance providing electricians and professional tradesmen with the fastest rough-ins and lightest right-angle drill. Upgraded POWERSTATE Brushless Motor and enhanced REDLINK PLUS Intelligence electronics. Increased power and speed. When paired with M18 REDLITHIUM HIGH OUTPUT 6.0AH Batteries (sold separately), it can drill up to 220-7/8 in. Holes on a single charge. Lightweight and compact size. Fastest Rough-Ins. Lightest right angle drill. Up to 220-7/8 in. Holes per charge. All metal 1/2 in. Keyed chuck. POWERSTATE brushless motor provides constant power under heavy load to power through 2-9/16 in. Holes. REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge. M18 REDLITHIUM HIGH OUTPUT XC6.0 battery pack delivers over 220-7/8 in. Holes per charge, and has 50% more power and runs 50% cooler versus REDLITHIUM XC. LED light to illuminate the work area. Compatible with all M18 batteries. Ergonomic top handle for maximum comfort. Includes: M18 FUEL hole hawg and chuck key. Cordless. Voltage (volts): 18 V. Motor Type: Brushless. Chuck Size: 1/2 In.. Chuck Type: Keyed. Features: Variable Speed. Maximum Speed (RPM): 1550 RPM

Milwaukee M12 12V Lithium-Ion Cordless Copper Tubing Cutter Kit with 1.5 Ah Battery, Charger and Hard Case. The MILWAUKEE M12 Copper Tubing Cutter is the industry's first cordless unit, cutting up to 10X faster than conventional tubing cutters. Milwaukee engineered this versatile copper tubing cutter for plumbers, mechanical contractors, and remodelers that runs at 500 RPM for unmatched cutting speed. The included M12 Battery and ultra-efficient gearing allow users to make up to 200 cuts on a single charge. The patent-pending cutting mechanism automatically adjusts diameter to cut Type K, L, and M copper pipes from 3/8" to 1" (OD from " to 1-1/8"). The unique rotating cutting head cuts installed copper piping with as little as 1-1/2" clearance, and the lightweight, inline design provides users with a longer reach and reduces wrist strain when working in confined spaces. A built-in LED light illuminates the cutting surface. The electronic overload protection and unibody construction provide maximum durability. An onboard, real-time battery fuel gauge helps users monitor the charge precisely, so there's less downtime on the job. In addition to the M12 Copper Tubing Cutter, this kit includes an M12 Battery Charger and an M12 REDLITHIUM CP1.5 Battery Pack. Auto-adjusts to cut 3/8 to 1 Type K, L & M copper pipes. Produces more than 200 cuts in a single charge. Part of the M12 System, featuring over 125+ tools. Cuts copper tubing with as little as 1-1/2" of clearance. Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters. Metal Cutting Head is corrosion and rust resistant and sealed for water protection. Electronic Overload Protection along with uni-body construction for increased durability. Inline Design reduces wrist strain in confined spaces. Built-in LED light illuminates the line of cut for better visibility. Onboard battery fuel gauge: displays remaining runtime. Includes: (1) M12 cordless copper tubing cutter (2471-20), (1) M12 Lithium-ion battery charger (48-59-2401), (1) M12 REDLITHIUM CP1.5 battery pack (48-11-2401), (1) carrying case. Batteries Included: Yes. Battery Amp Hours: 1.5 Ah. Battery Power Type: Lithium Ion. Battery Size: Lithium Ion. Battery Voltage (V): 12V. Battery/Charger: 1 Battery & Charger Included. Charger Included: Charger Included. Color Family: Red. Condition: New. Cordless Tool Type: Specialty. Cordless/Corded: Cordless. Included: No Additional Items Included. Motor Type: Brushed. Number of Total Batteries Included: 1. Pack Size: 1. Power Tool Features: No Additional Features. Product Weight (lb.): 3.2 lb. Tools Product Type: Power Tool. Variable Speed: Yes. Certifications and Listings: UL Listed. Product Depth (in.): 13 in. Product Height (in.): 4 in. Product Width (in.): 2.3 in.

Milwaukee M18 FUEL 5 in. Random Orbit Sander (Tool-Only) Cordless FUEL 5 in. Random Orbit Sander (Tool-Only). Designed for the professional carpenter, remodeler, and general contractor, the MILWAUKEE M18 FUEL 5" Random Orbital Sander generates the Power for Heavy Stock Removal to sand the toughest materials on site while delivering the Lowest Cordless Vibration at 12K OPM and Up To 95% Dust Collection. The ergonomic form factor, compact size, and low vibration offer increased user comfort during operation. The POWERSTATE Brushless Motor and REDLINK PLUS intelligence deliver corded power for faster removal at 12,000 OPM for enhanced productivity on the jobsite. The sander features a random orbital sanding motion with a 3/32" orbit diameter to deliver a clean, consistent stain-grade surface finish, combined with a variable 5-mode speed button from 12K - 4K for increased control across a wide variety of materials. Equipped with VACLINK Bluetooth technology, the sander delivers up to 95% efficiency and instant dust control when paired with the M18 FUEL PACKOUT 9 Gallon Dual-Battery Dust Extractor. Delivers 12K max RPM under load for faster material removal. Protection from overloads, heating, and over-discharge. Integrated dust control for faster clean-up on the jobsite. POWERSTATE Brushless Motor: Generates the power to deliver 12K max OPM under load for faster material removal. REDLINK PLUS Intelligence: Ensures maximum performance and protects from overloads, heating, and over-discharge. Integrated Dust Control for up to 95% dust collected and the versatility of the included bag or universal hose adapter provides faster clean-up on the jobsite. VACLINK Technology: Integrated wireless dust control technology allowing for activation of directly from the M18 FUEL 5" Random Orbital Sander to connect to our M18 FUEL PACKOUT 9 Gallon Dual-Battery Dust Extractor w/ VACLINK for increased efficiency. Random Orbital sanding motion with 3/32" (2.5mm) orbit diameter delivers a scratch-free stain grade surface finish. Ergonomic form-fitting pommel grip and low vibration minimizes user fatigue. 5-Speed Mode Button allows for unmatched control across various materials. Fits all M18 battery packs. Includes: (1) 2837-20 5" Random Orbital Sander, (1) Edge Guard, (1) Universal Hose Adapter, (1) 80 Grit Abrasive. Batteries Included: No. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: 18-volt. Battery Voltage (V): 18V. Charger Included: Charger Not Included. Color Family: Red. Condition: New. Cordless Tool Type: Orbit Sander. Cordless/Corded: Cordless. Dust Collection Method: Hose Adaptor with Built-in Port. Included: Other Accessories. Motor Type: Brushless. Number of Total Batteries Included: 0. Power Tool Features: Variable Speed. Product Weight (lb.): 3.10 lb. Random orbit: Yes. Speed (rpm): 12000. Switch Type: On and Off. Tools Product Type: Cordless Power Tool. Variable Speed: Yes. Certifications and Listings: UL Listed. Product Depth (in.): 7.90 in. Product Height (in.): 5.50 in. Product Width (in.): 6.40 in.

RIDGID 6 Gal. 150 PSI Portable Electric Pancake Air Compressor w/18ga Brad Nailer and Hose. 6 Gallon Air Tank, 150 MAX PSI, 2.6 SCFM @ 90 PSI. Includes 18 gauge brad nailer for trim and finish work. Includes 25-foot air hose for extended reach. 150 PSI Capacity: Powers through trim and finish work with the 6-gallon pancake air compressor. 1.5 HP Motor: Provides reliable power for consistent performance on tough jobs. Oil-Free Motor: Ensures low maintenance and hassle-free operation. 2.6 SCFM at 90 PSI: Ensures high efficiency and reliable performance. Dual Gauges: Monitors air tank pressure and output pressure to the tool for precise control. Dual Quick Connectors: Supports two users for smooth operation on busy job sites. Integrated Carrying Handle: Offers easy transport and portability around the job site. Vibration-Resistant Rubber Feet: Reduces movement and stabilizes the compressor during use. Air Tank Drain: Allows quick and easy removal of moisture from the tank. 18 Gauge Brad Nailer: Delivers precision for delicate trim and molding tasks. 25-Foot Air Hose: Extends your reach for easy maneuverability around the job site. RIDGID Reliability: Built for a lifetime of tough projects. Air Delivery SCFM @ 40PSI: 3.6. Air Delivery SCFM @ 90PSI: 2.6. Amperage (A): 12.5 A. Application Use: Blow Cleaning, Brad Nailing, Finish Nailing, Framing Nailing, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Stapling, Trim. Compressor Tank Capacity (gal.): 6 gal. Compressor Type: Professional. Compressor Volume Rating: Quiet. Compressor/Air Tool Features: Automatic Start/Stop, Combo Kit, Dual Control, Handle, Oil Free Compressor, Tank Pressure Gauge, Universal Quick Connectors. Decibel Rating (Outdoor): 80 dBA. Horsepower (hp): 1.5 hp. Included: Air Hose, Brad Nailer. Lubrication Type: Oil less. Maximum Pressure (PSI): 150 PSI. Portable: Yes. Power Source: Electric. Power Type: Corded Electric. Product Weight (lb.): 33.95 lb. Stage Count: Single Stage. Tank Material: Steel. Tank Style: Pancake. Tools Product Type: Air Compressor Kit. Voltage (V): 120 V. Voltage (v): 120v. Certifications and Listings: ETL Listed. Product Depth (in.): 16.1 in. Product Height (in.): 17.96 in. Product Width (in.): 15.93 in.

DeWalt 60V MAX DCBL772X1 125 mph 600 CFM 60 V Battery Handheld Leaf Blower Kit (Battery & Charger). As part of the 60V MAX Flexvolt battery system of high-powered products, the 60V MAX Flexvolt brushless handheld axial blower powers through your task with up to 600 CFM of air volume and 125 MPH. It features a variable speed trigger and speed lock to control the blower output. This kit also comes with a 20V/60V MAX Flexvolt battery that can both power your line-up of 60V MAX tools and equipment as well as your 20V MAX tools and can be charged with your 20V MAX chargers.

FLEXVOLT 60-Volt MAX Cordless Brushless 7-1/4 in. Circular Saw with Brake (Tool-Only). Our most powerful tools just got better with the FLEXVOLT 60-Volt MAX 7-1/4 in. Cordless Circular Saw with Electric Brake. It has up to 47% more power than the DCS575 60-Volt MAX Circular Saw with 2456 unit watts out. It combines the power of a corded circular saw with the portability and convenience of cordless thanks to revolutionary DEWALT FLEXVOLT technology that offers a no-load speed of 5800 RPM. Battery and charger sold separately. Up to 47% more power versus the DCS575. Uses a 7-1/4 in. Circular saw blade and features a maximum cut depth of 2-9/16 in. At a 90 bevel. Maximum bevel capacity of 57 with bevel stops at 22.5 and 45. Electric brake stops the blade after the trigger is released. Integrated LED for increased visibility and cut accuracy. Integrated rafter hook for quick and easy storage. Blade Diameter (in.): 7-1/4 in. Cordless/ Corded: Cordless. Blade Location: Right. Motor Type: Brushless. Saw Drive Type: Sidewinder. Battery Amp Hours: No Battery. Number of Total Batteries Included: 0

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer (Tool-Only). Milwaukee M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day. Additionally, the cordless brad nailer operates using Milwaukee's REDLITHIUM Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The 18 gauge nailer is compact in size, and very lightweight, providing users with unmatched access into tight spaces and limiting their fatigue throughout their day. The M18 FUEL 18ga Brad nailer delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless. Reversible belt hook included. Three interchangeable tips included. Dry fire lockout. No gas cartridge required. On / Off power button. Tool free drive depth adjustment. Tool free jam clearing latch. Sequential and contact actuation firing modes.

RYOBI 40V HP Brushless 14 in. Battery Chainsaw with 4.0 Ah Battery and Charger. 40V HP technology delivers 15% more power. 14" bar & chain for 24" cut capacity. Adjustable automatic oiler for consistent chain lubrication. Side access chain tensioning and on-board tool storage for easy adjustments. Includes RYOBI 40V 4Ah lithium-ion battery and charger. Battery Amp Hours: 4 Ah. Battery Power Type: Lithium Ion. Battery Size: 40-volt. Battery Voltage (V): 40V. Battery/Charger: (1) 4 Ah Battery & Charger Included. Chain Pitch: 3/8 in.. Chain Speed (mps): 21. Chainsaw Bar Size: Small. Chainsaw Type: Hand Chainsaw. Charger Included: Charger Included. Color Family: Green. Condition: Open Box - Not Tested. Drive Links: 52. Features: Adjustable Forward Speed, Brushless Motor, Bumper Spikes, Variable Speed. Filter Type: No Filter. Gauge: .050. Handle Type: Rear Handle Chainsaw. Included: Scabbard. Number of Total Batteries Included: 1. Outdoor Power Combo: No Additional Tools. Power Type: Battery. Product Weight (lb.): 11.5 lb. Refurbished: No. Tools Included: Battery, Chainsaw, Charger. Torque Maximum (Nm): 0. Certifications and Listings: UL Listed. Bar Length (in.): 14 in.. Chain Size: 14 in.. Maximum Cut Diameter (in.): 24 in.

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer (Tool-Only). Milwaukee M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day. Additionally, the cordless brad nailer operates using Milwaukee's REDLITHIUM Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The 18 gauge nailer is compact in size, and very lightweight, providing users with unmatched access into tight spaces and limiting their fatigue throughout their day. The M18 FUEL 18ga Brad nailer delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless. Reversible belt hook included. Three interchangeable tips included. Dry fire lockout. No gas cartridge required. On / Off power button. Tool free drive depth adjustment. Tool free jam clearing latch. Sequential and contact actuation firing modes.

DEWALT XR 20V MAX Lithium-Ion Cordless Brushless Screw Gun (Tool Only) DCF630B. The DCF630 Brushless Drywall Screwgun features a brushless motor and electronic mode select to help optimize usage in a range of drywall hanging applications. Four dedicated tool modes enable operation of the screwgun in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode. A top-mounted electronic mode select enables fast, one-handed switching between the tool's four modes. The DCF630's compact size and weight are designed to reduce fatigue during periods of extended usage, while its wide upper grip flange enables secure placement of thumb and forefinger. Brushless motor for efficient performance. Wide variable speed range with dedicated High and Low settings. 4 dedicated tool modes enable versatile operation. Brushless motor for efficient performance and runtime. Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates. Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode. Top-mounted electronic mode select enables fast, one-handed switching between the tool's four modes. Adjustable nosecone enables consistent setting of proper screw depth. Compact size and weight designed to reduce fatigue during periods of extended use. LED light helps to illuminate the work area. Tool Connect CHIP READY: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately). Lanyard-Ready compatible. Tool only (Battery and Charger sold separately). Battery Voltage (V): 20V. Color Family: Yellow. Cordless Tool Type: Screw Gun. Cordless/Corded: Cordless. Drill/ Driver Type: Screw Gun. Maximum Speed (RPM): 4850 RPM. Motor Type: Brushless. Power Tool Features: Depth Adjustment,LED Light. Product Weight (lb.): 2.6 lb. Tools Product Type: Other. Certifications and Listings: CSA Listed. Product Depth (in.): 11.438 in. Product Height (in.): 7.188 in. Product Width (in.): 3.375 in

RYOBI ONE+ HP 18V Brushless Cordless Compact 1/4 in. Hex Impact Driver Kit with (2) 1.5 Ah Batteries and Charger. This is an open box item that has been tested for basic functionality. RYOBI introduces the 18V ONE+ HP Compact Brushless 1/4 in. Hex Impact Driver (Tool Only). This next generation of HP compact brushless tools utilizes ONE+ HP Brushless technology to deliver more power, longer runtime, and longer motor life. At a length of just 5.3" in length, this tool is the most compact and lightest weight RYOBI Impact Driver, making it ideal for working in tight spots and completing overhead applications without strain. The brushless motor delivers up to 1,900 in-lbs. Of torque-and up to 3,900 IPM to quickly drive a variety of fasteners. And to help eliminate downtime, we paired this impact driver with a variable speed trigger for precise control of up to 3,000 RPM. You'll also appreciate the knurled 1/4 in. Hex collet with one-handed bit release. Best of all, it is part of the RYOBI ONE+ System of over 300 Cordless Products that all work on the same battery platform. ONE+ HP Brushless Technology Delivers Up To 1,900 in-lbs. Torque. Compact Impact Driver Is Only 5.3" in Length. Over 300 ONE+ Products All Work With Any RYOBI 18V ONE+ Battery. Compact size at 5.3" in length and lightweight. Brushless Motor provides longer runtime, longer motor life, and more power. Delivers up to 1,900 in-lbs. Of torque. Variable speed trigger for control of up to 3,000 RPM. Knurled 1/4 in. Hex collet for one-handed bit release. On-board LED worklight to illuminate workspace. Optimized impacting mechanism delivers up to 3,900 IPM. Perfect for any DIY or professional job. Part of the RYOBI 18V ONE+ System of Over 300 Cordless Products. Includes: (1) PSBID02 ONE+ HP 18V Compact Brushless 1/4 in. Hex Impact Driver, (2) PBP002 1.5Ah Lithium Batteries, PCG002 Charger, Tool Bag, and Operator's Manual. Battery Amp Hours: 1.5 Ah. Battery Power Type: Lithium Ion. Battery Voltage (V): 18V. Battery/Charger: 2 Batteries & Charger Included. Blows per Minute (BPM): 3900. Charger Included: Charger Included. Color Family: Green. Condition: New. Cordless Tool Type: Impact Driver. Cordless/Corded: Cordless. Drill/ Driver Type: Impact Driver. Drive Size: 1/4 In. Hex. Included: Battery Included, Charger. Maximum Speed (RPM): 3000 RPM. Motor Type: Brushless. Number of Total Batteries Included: 2. Power Tool Features: Built-In Light, Cushioned Grip, Forward/Reverse Switch, LED Light, Variable Speed. Product Weight (lb.): 1.8 lb. Tools Product Type: Power Tool. Torque (In-Lbs): 1900. Certifications and Listings: UL Listed. Product Depth (in.): 5.2 in. Product Height (in.): 7.4 in. Product Width (in.): 2.9 in.

20V MAX XR 2-1/4 Peak HP Brushless Cordless Plunge Router (Tool Only). The world's first 20V MAX cordless 2-1/4 Peak HP dedicated plunge router delivers consistent cutting performance without the hassles of a cord. From meticulous edgework to aggressive plunge cuts, the 20V MAX XR 2-1/4 Peak HP Plunge Router (battery and charger sold separately) features a 2-1/4 peak horsepower brushless motor that seamlessly handles bits up to 2-1/2 in. In diameter. The variable speed dial helps maximize user control while maintaining constant speed under load. This router can complete up to 256 linear feet routing 5/8 in. Roundovers in pine on a single charge and helps to maintain a clean workspace with integrated dust collection with AirLock compatibility. Designed for tough jobsites, the PERFORM and PROTECT ANTI-ROTATION system senses the motion of the tool and shuts it down if the motion is excessive. Amperage (A): 0.0 A. Batteries Included: No. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: Lithium Ion. Battery Voltage (V): 20V. Charger Included: Charger Not Included. Collet Size (in.): 1/2 in.,1/4 in.. Color Family: Yellow. Condition: New. Cordless Tool Type: Router. Cordless/Corded: Cordless. Horsepower (HP): 2.25 hp. Included: No Additional Items Included. Motor Type: Brushless. Number of Total Batteries Included: 0. Portability: Handheld. Power Tool Features: Adjustable Depth Stops,Two Hand Grips. Product Weight (lb.): 4.15 lb. Returnable: 90-Day. Router Base Type: Plunge Base. Tool Only| Kit: Tool Only. Tools Product Type: Power Tool. Certifications and Listings: CSA Listed. Product Depth (in.): 8.379 in. Product Height (in.): 5.75 in. Product Width (in.): 6.1 in.

Milwaukee M18 7-1/4 in. Cordless Brushless Circular Saw Tool Only. The Milwaukee 7-1/4 in. M18 Brushless Circular Saw delivers up to 40% more power than circular saws with brushed motors while providing up to 30% more run-time. The circular saw is equipped with Redlink electronics and powered by a Redlithium XC5.0 battery, providing more efficient power delivery and fewer trips to the charger. The circular saw provides smooth cutting with 5,000 rpm and at only 9 lbs., it is lighter than most corded saws.

RYOBI ONE+ HP 18V Brushless 10 in. Chainsaw (Tool Only). ONE+ HP technology combines a brushless motor, advanced electronics, and high performance lithium technology to deliver 85% faster cutting. This chainsaw makes up to 70 cuts per charge when using a 4Ah lithium-Ion battery. The 10" bar and chain can tackle up to 8" cuts, ideal for pruning and limbing. This tool features a push button oiler to easily release oil on the chain. Compatible with RY10C1 10" Replacement Chain & RYBIO24 Bar & Chain Lubricant. Part of the RYOBI ONE+ system where any 18V ONE+ battery works with any 18V ONE+ product. ONE+ HP Technology delivers 85% faster cutting. Up to 70 cuts per charge when using an 18V ONE+ 4Ah Battery. Over 300 ONE+ Products. All Work With Any RYOBI ONE+ 18V Battery. Battery and charger not included. 10 in. Bar and chain. Brushless motor for higher chain speed and superior operation. Lightweight, compact design for user convenience. Push button oiler for longer chain life. Side access chain tensioning and on-board tool storage for easy adjustments. Works with all RYOBI 18V ONE+ Lithium-ion batteries. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: 18-volt. Battery Voltage (V): 18V. Battery/Charger: Tool Only. Chain Pitch: 3/8 in.. Chain Speed (mps): 7.9. Chainsaw Bar Size: Mini. Chainsaw Type: Hand Chainsaw. Charger Included: Charger Not Included. Color Family: Green. Condition: New. Drive Links: 40. Features: Brushless Motor, Bumper Spikes. Filter Type: No Filter. Gauge: .043. Handle Type: Rear Handle Chainsaw. Included: Chain, Scabbard, Scrench/Combination Wrench. Number of Total Batteries Included: 1. Outdoor Power Combo: No Additional Tools. Power Type: Battery. Product Weight (lb.): 6.4 lb. Refurbished: No. Tools Included: Chainsaw. Torque Maximum (Nm): 0.0. Certifications and Listings: UL Listed. Bar Length (in.): 10 in.. Chain Size: 10 in.. Maximum Cut Diameter (in.): 8 in.

RYOBI ONE+ 18V Cordless 6-Tool Combo Kit with 1.5 Ah Battery, 4.0 Ah Battery, and Charger. The kit includes: 1/2 in. Drill/Driver (PCL206), 1/4 in. Impact Driver (PCL235), Reciprocating Saw (PCL515), 5-1/2 in. Circular Saw (PCL500), Multi-Tool (PCL430), LED Light (PCL660), 1.5 Ah Lithium-Ion Battery (PBP002), 4.0 Ah Lithium-Ion Battery (PBP005), 18V Charger, Tool Bag, and Operator's Manuals. The Drill/Driver provides up to 515 in./lbs. of torque and features a 1/2 in. ratcheting metal chuck. The Impact Driver delivers 3,400 IPM and 1800 in./lbs. of torque, with a variable-speed trigger up to 2,700 RPM. The Reciprocating Saw delivers up to 3,400 SPM. The 5-1/2 in. Circular Saw can make over 215 cuts per charge. The Multi-Tool features an adjustable speed dial for cutting and sanding various materials. The LED Light has 280 Lumens of light output and a 130-degree pivoting head. Accessories include: 18T Carbide Blade, Hex Wrench, Reciprocating Saw Blade, Hex Key, Flush Cut Blade, Plunge Cut Blade, 6 in. Wood Blade, Sanding Pad, and 5-Pieces Sandpaper. All tools are part of the RYOBI 18V ONE+ System. Battery Power Type: Lithium Ion. Charger Included. Color Family: Green. Condition: New(other). Cordless Tool Type: Combo Kit. Cordless/Corded: Cordless. Included: Battery Included, Bits, Blade(s), Charger. Motor Type: Brushed. Number of Tools: 6. Number of Total Batteries Included: 2. Power Tool Features: Keyless Chuck, LED Light, Variable Speed. Tools Included: Circular Saw, Drill Driver, Impact Driver, Multi-Tool, Reciprocating Saw, Worklight. Tools Product Type: Power Tool. Voltage: 18 V. Certifications and Listings: UL Listed.

DEWALT DCS389B FLEXVOLT 60V MAX Cordless Brushless Reciprocating Saw (Tool Only). Our most powerful tools just got better with the 60-Volt MAX reciprocating saw. It provides up to 19% more power than the DCS388 60-Volt MAX reciprocating saw with 1874 unit watts out. With a no-load speed of 3000 SPM, this saw delivers the power of a corded reciprocating saw with the portability and convenience of a cordless through our revolutionary DEWALT FLEXVOLT technology. Up to 19% more power versus the DCS388. Power of corded with the freedom of cordless. 0 SPM - 3000 SPM and 1-1/8 in. Stroke length for fast and efficient cutting. Keyless lever-action blade clamp for quick and easy blade changes. Variable-speed trigger allows user to instantly control speed. Pivoting shoe provides leverage for different applications. LED helps illuminate dark jobsite work areas. Rubber overmold grip for comfort. Cordless. Number of Total Batteries Included: 0. Battery Amp Hours: No Battery. Included Accessories: Tool Only. Cuts Through: Metal. Cuts Through: Wood. Features: Variable Speed

Milwaukee M18 FUEL Quik-Lok 3016-20ST 16 in. 18 V Battery String Trimmer Tool Only. New. UPC: 045242794379. Since the company began in 1924, Milwaukee Tool has led the industry in developing innovative solutions that deliver increased productivity and unmatched durability for professional construction users. Whether it is through our world-leading M12 and M18 cordless systems, the ground-breaking performance of our M12 and M18 Fuel products, jobsite lighting, time-saving accessories, or innovative hand tool and storage products, we are dedicated to delivering a continuous flow of advanced, trade-specific solutions. We invest the time to work side-by-side with real users to understand the demands of a constantly changing workplace and how we can best deliver solutions for a safer, more productive jobsite. Through a thorough evaluation of the job at hand - the frustrations, needs, and previous limitations - we set out to completely rethink a solution and deliver the game-changing innovation seen across all our product lines. Milwaukee Tool is not simply a manufacturer - we are progressive problem solvers.