Excess Assets of Precision CNC and Fabrication Facility

SOUTHWESTERN INDUSTRIES PROTOTRAK TRL-1840 CSS CNC LATHE - SPECIFICATIONS: SWING OVER BED: 18 1/2" SWING OVER CROSS SLIDE: 9" DISTANCE BETWEEN CENTERS: 40 1/4" CROSS SIDE TRAVEL: 13" SPINDLE NOSE TYPE: D1-6 CAMLOCK HOLE THRU SPINDLE: 2.36" SPINDLE SPEEDS (12): 50 - 2,500 RPM TAILSTOCK QUILL TRAVEL: 6 1/4" TAILSTOCK QUILL TAPER: MT5 MAIN DRIVE MOTOR: 10 HP ELECTRICS: 220V/3PH/60HZ DIMENSIONS: 94" LR X 55" FB X 73" H APPROXIMATE WEIGHT: 5,000 LBS.

BLOHM PLANOMAT 612 CNC SURFACE GRINDER - 24" X 48" TABLE, BLOHM KORBER CNC CONTROLS.

OKUMA MX-45VAE CNC VERTICAL MACHINING CENTER - SPECIFICATIONS: WORK ENVELOPE: 20" X 40" X AXIS TRAVEL: 30" Y AXIS TRAVEL: 18.1" Z AXIS TRAVEL: 17.7" SPINDLE SPEEDS: 50 - 7000 RPM SPINDLE TAPER: CAT 40 RAPID TRAVERSE X&Y: 1181 IPM RAPID TRAVERSE SPEED Z: 645 IPM TOOL MAGAZINE CAPACITY: 20 SPINDLE MOTOR OUTPUT: 10 HP

BROTHER HS-50A EDM MACHINE - SPECIFICATIONS: - 5 AXIS - X-Y TRAVEL

65 TON PIRAHNA P65 IRONWORKER - SPECIFICATIONS: MAX PUNCHING CAPACITY: 65 TONS THROAT DEPTH: 8" ROUND BAR SHEAR: 1/4" - 1 1/2" SQUARE BAR SHEAR: 1/2" - 1" FLAT BAR SHEAR: 15" X 5/8", 10" X 3/4" ANGLE SHEAR: 5" X 5" X 3/8" MOTOR: 7.5 HP

KEARNEY & TRECKER S-15 VERTICAL MILL - AREA OF TABLE 69" X 15" SPINDLE SPEEDS (24) 25 TO 2000 RPM LONGITUDINAL&CROSS FEEDS (32) 3/8 TO 90 IPM VERTICAL FEEDS (32) 1/8 TO 30 IPM LONGITUDINAL TABLE TRAVEL 42" CROSS TRAVEL 14" VERTICAL KNEE TRAVEL 18" CENTER OF SPINDLE-TOP OF TABLE 0 - 18" MAX. RAPID TRAVERSE 150 IPM TAPER IN SPINDLE #50 NS DUAL CONTROLS YES MOTOR 15 HORSEPOWER

VINCO PRECISION GEAR INSPECTION UNIT WITH: ROTARY TABLE, TAILSTOCK ON T-SLOTTED BASE - INCLUDES: -18" ROTARY TABLE WITH 18" FACEPLATE & 12" MAGNETIC CHUCK, EQUIPPED WITH INSPECTION EYE SIGHT-HOLE & LIGHT -VINCO TAILSTOCK, TOOL NO: 55-36 -VINCO 72" X 36" X 1-1/4" THICK HIGH PRECISION SCRAPED T-SLOTTED TABLE & BASE

LEBLOND MANUAL LATHE S/N: 8C 4603

BROTHER HS-350 EDM MACHINE S/N: 111239

150 TON X 12' CHICAGO MECHANICAL PRESS BRAKE W/ HURCO AUTOBEND IV CONTROLS - APPROX 150 TON LENGTH OF BED: 12' DISTANCE BETWEEN HOUSING: 10'6" EQUIPPED WITH HURCO AUTOBEND IV BACKGAUGE.

10' X 1/4" NIAGARA MECHANICAL SQUARING SHEAR. - LENGTH OF BLADE: 120" CAPACITY: 1/4" MANUAL BACKGAGE

LISTA 10 DRAWER TOOLING CABINET. - 10-DRAWER LISTA CABINET 28" W X 30" D X 44" H DRAWERS OPERATE SMOOTHLY, NO CONTENTS INCLUDED, SOME DIVIDERS ARE INCLUDED

LISTA 13 DRAWER INDUSTRIAL TOOLING CABINET 13-DRAWER LISTA INDUSTRIAL TOOLING CABINET MFG: LISTA COLOR: GRAY DIMENSIONS: 28" X 28" X 54" H NO LOCK, NO CONTENTS INCLUDED, SOME DIVIDERS ARE INCLUDED

LISTA 16-DRAWER INDUSTRIAL TOOLING CABINET 16-DRAWER LISTA INDUSTRIAL TOOLING CABINET MFG: LISTA COLOR: BEIGE DIMENSIONS: 28" X 28" X 54" H NO CONTENTS INCLUDED, SOME DIVIDERS ARE INCLUDED, BOTTOM DRAWER HAS BEEN REMOVED

TREE VMC 1060 VERTICAL MACHINING CENTER W/ DYNAPATH CONTROLS - TABLE-W : 600 MM (23.62) TABLE-L : 1,250 MM (49.2) X-AXIS TRAVEL, CROSS :1,000 MM (39.37) Y-AXIS TRAVEL, TRAVERSE: 600 MM (23.62) Z-AXIS TRAVEL, VERTICAL :635 MM (25) SPINDLE TAPER : CAT-40 POWER : 11.2 KW RPM : 8000 ATC : 24 DIMENSIONS : 106.3 L X 83.5 W X 124 H WEIGHT : 16,535 LBS VOLTAGE 230V, 60 HZ,3 PHASE

BOYAR SCHULTZ 6" X 18" SURFACE GRINDER S/N: 103954

AMERICAN HOLE WIZARD RADIAL ARM DRILL - SIZE (NOMINAL)............. 3' ARM, 9" COLUMN HEIGHT (OVERALL)............. 103" TABLE 16" X 31"

CINCINNATI CINTIMATIC HORIZONTAL BORING MILL W/ ACRAMATIC CONTROLS 42" X 27.5" TABLE WITH 38.5" X 16" DECK. S/N: 3LP1H5R-61

ELECTRO ARC 2DB METAL DISINTEGRATOR KVA: 15 VOLTAGE: 220V AMPS: 26 HZ: 60 PHASE: SINGLE TABLE: 18" X 26"

GRANITE SURFACE PLATE 144" X 72" X 15.5" - LARGE GRANITE SURFACE PLATE WITH STAND.

2009 TRUMPF TRULASER 7000 3600-WATT TRUMPF TRULASER 7000 TUBE LASER MODEL: TRUMPF 7000 YOM: (2009) WATTAGE: 3600 WATT WORKING RANGE X-AXIS: 6500MM, Y-AXIS: 320MM, Z-AXIS: 230MM, A1-AXIS: N X 360MM, A2-AXIS: N X 360MM TUBE DIMENSIONS: MAX RAW MATERIAL LENGTH: 6500MM, MIN RAW MATERIAL LENGTH: 6500MM MAX. OUTSIDE DIAMETER: 200MM, MAX. OUTSIDE DIAMETER: 15MM MAX. LENGTH OF FINISHED PART: 3000MM MIN. LENGTH OF REMAINDER TUBE: 120MM MAX. MATERIAL THICKNESS: 8MM TUBE BUNDLE MAX. TUBE BUNDLE CROSS-SECTION: 600 X 600 MM X MM MAX TUBE BUNDLE WEIGHT: (FINISHED PART) 25 KG SPEEDS X-AXIS: 100MM/MIN, Y-AXIS: 60MM/MIN, Z-AXIS: 60MM/MIN, A AXIS:150 RPM LENS CUTTING HEAD (FOCAL LENGTH): 155 MM CONTROL: SEIMENS SINUMERIK 840 S SL MAX MATERIAL THICKNESS IN MM: MILD STEEL: 8MM, STAINLESS STEEL: 8MM, ALUMINUM: 5MM, MACHINE ON HOURS: 32,835 BEAM ON HOURS: 6,749 LARGE COMPLEMENT OF SPARE PARTS FOR THE UNIT ARE INCLUDED. UNIT POTENTIALLY NEEDS A NEW RESONATOR, TRUMPF RECENTLY INSPECTED THIS MACHINE AND THE TRUMPF INSPECTION REPORT IS AVAILABLE UPON REQUEST. ALL SPECIFICATIONS SUBJECT TO BUYERS VERIFICATION

HAAS VF-3 CNC VERTICAL MACHINING CENTER - X-AXIS: 40 Y-AXIS: 20 Z-AXIS: 25 RAPID TRAVERSE RATES: 710 INCH PER MINUTE CUTTING FEED RATES: 500 INCH PER MINUTE SPINDLE NOSE TO TABLE (MIN.- MAX.): 4 29 4TH AXIS WITH HAAS ROTARY INDEX TABLE: LENGTH: 48 WIDTH: 18 NUMBER OF STD T-SLOTS: 5 T-SLOT WIDTH: 5/8 MAX WEIGHT ON TABLE: 1500 LBS SPINDLE: TAPER SIZE: 40 SPEED RANGE: 0 7500 RPM SPINDLE TYPE: GEAR HEAD SPINDLE POWER: 20 HP VECTOR DUAL DRIVE MAX TORQUE: 90FT-LB @ 2000 RPM AUTOMATIC TOOL CHANGER: CAPACITY: 20 + 1 MAX TOOL WEIGHT: 12 LBS MAX TOOL DIA: 3.6 MAX TOOL LENGTH: 13 TOOL CHANGING TIME: 4.2 SECONDS GENERAL: AIR REQUIRED: 100 PSI, 4 SCFM POWER: 220V / 66FLA / 3-PHASE OVERALL DIMENSIONS: 118 X 98 X 100 HIGH WEIGHT: 12,500 LBS ADDITIONALLY VECTOR DRIVE WAS REPLACED IN 2019. HAAS VF-3 FEATURES: 20HP HIGH TORQUE GEARED HEAD SPINDLE 2 SPEED GEARBOX 20 + 1 AUTOMATIC TOOL CHANGER PROGRAMMABLE COOLANT TELESCOPIC WAY COVERS CHIP AUGER FLOPPY DRIVE FLOOD COOLANT SYSTEM UNDER POWER & VIDEO AVAILABLE

1998 STUDER S30 LEAN PRO 14" X 40" CNC ID/OD GRINDER. CONTROL: FANUC 16-T. ROYAL FILTER-MIST FX 900 MIST COLLECTOR. GRANITAN MACHINE BED.

PORTAGE ROTARY LAYOUT MACHINE - 36" X 36" TABLE.

MILLER SSW-2040ATT 20 KVA RESISTANCE SPOT WELDER - VOLTS: 440 AMPS: 45 PHASE: 1 HERTZ: 60

2 HP SERIES 1 BRIDGEPORT MILLING MACHINE - 9" X 42" TABLE ANILAM 2 AXIS DIGITAL READOUT

SUMMIT HORIZONTAL BORING MILL 43" X 51" TABLE. S/N: 110

DEVLIEG 43K-48 SPIRAMATIC JIG MILL - DEVLIEG SPIRAMATIC JIGMILL, 4" SPINDLE DIA., 1450 RPM, 15 HP. X-AXIS TRAVEL: 72" Y-AXIS TRAVEL: 60" Z-AXIS TRAVEL: 20"

2002 FADAL 3020 HT VERTICAL MACHINING CENTER - TABLE AREA: 40.5" X 20" MAX. WEIGHT ON TABLE: 4,250 LBS. TRAVELS: X AXIS: 30" Y AXIS: 20" Z AXIS: 24" (EXTENDED Z OPTION) SPINDLE NOSE TO TABLE: 4" - 28" SPINDLE CENTER TO COLUMN WAYS: 22.875" MOTOR: 22.5HP(HT) SPINDLE SPEEDS: 10 TO 10,000 RPM SPINDLE TAPER: NO. 40 ATC: 21 MACHINE DIMENSIONS: 106" W X 85" D X 102" H MACHINE WEIGHT: 13,000 LBS. EQUIPPED WITH: SIEMENS SINUMERIK 840D CONTROL FLOOD COOLANT

OKK PCV 55 CNC VERTICAL MACHINING CENTER - TABLE SIZE: 48" X 22" MAX TABLE LOAD: 1,500 LBS TRAVELS: X AXIS TRAVEL: 40" Y AXIS TRAVEL: 22" Z AXIS TRAVEL: 20" SPINDLE NOSE TO TABLE TOP: 5.91" - 26.38" SPINDLE SPEED: 20 - 10,000 RPM SPINDLE TAPER: CT50 SPINDLE MOTOR: 30/20 HP TOOL STATIONS: 20 ATC MACHINE WEIGHT: 15,500 LBS MACHINE DIMENSIONS: 121"L X 115"W X 121"H EQUIPPED WITH: MITSUBISHI NEOMATIC 500M CNC CONTROL RS-232 PORT BOX WAY COOLANT TANK & PUMP FULLY ENCLOSED GUARDING

2006 HAAS VF-7D/40 CNC VERTICAL MACHINING CENTER TRAVELS: X AXIS.......................: 84" Y AXIS.......................: 32" Z AXIS.......................: 30" SPINDLE NOSE TO TABLE........: 34" MAX SPINDLE NOSE TO TABLE........: 4" MIN SPINDLE: HP...........................: 20 MAX SPEED....................: 10000 RPM MAX TORQUE...................: 90 FT-LBF @ 2000 RPM 2 SPEED GEAR DRIVE...........: YES TAPER........................: 40 HOURS: SERVO........................: 11,486 MOTION.......................: 22,165 SPINDLE......................: 19,281 TABLE: LENGTH.......................: 84" WIDTH........................: 28" MAX WEIGHT ON TABLE..........: 4,000 LBS FEEDRATES: MAX THRUST X.................: 3400 LBF MAX THRUST Y.................: 3400 LBF MAX THRUST Z.................: 5600 LBF TOOL CHANGER.................: 32 + 1 ATC RIDGID TAPPING...............: YES 4TH AXIS DRIVE & WIRING......: YES HIGH SPEED MACHINING.........: YES ROT&SCALING..................: YES SPINDLE ORIENTATION M19......: YES WIPS.........................: YES PROBE........................: YES NO SPINDLE PROBE S/N: 1053592

LUCAS 42B60 HORIZONTAL BORING MILL - DIAMETER OF SPINDLE .............. 4" TAPER IN SPINDLE ...................... #6 MT, 2-1/2" DIAMETER SHANK AREA OF TABLE ................... ........86" X 48" SPINDLE SPEEDS ....................... (26) 9 TO 1200 RPM FEEDS .......................................... (81) .0001 TO 1.038 IPR SPINDLE TRAVEL ......................... 36" VERTICAL HEAD TRAVEL ............ 48" TABLE CROSS TRAVEL ................ 60" SADDLE TRAVEL ........................... 72" RAPID TRAVERSE ........................ 75 IPM 4 WAY BED TYPE MACHINE ........ YES PENDANT CONTROL .................... YES MOTOR .......................................... 20 HORSEPOWER

BRETCO BP-30 EDM MACHINE - MODEL BP-30.