Surplus Machinery Equipment No Longer Needed in the Continuing Operations of Hilite Industries Broadway Location ONLY 1st of 2 Auctions
Category: SURFACE FINISHING EQUIPMENT
Total Lots:
172
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
WALGREN | GL50F |
WALGREN GL50F 23-STATION MODEL ANODIZING LINE; WITH CLEANING STAGES: SOAK CLEANER, RINSE, ACID ACTIVATOR, RINSE, COATING FINISH & RINSE; (21) TANKS FOR DIFFERENT CONFIGURATIONS, (TANK STATIONS SIZE RANGE: 48"L X 20"W X 43"DEPTH TO 48"L X 36"W X 43"DEPTH.W/ DYNAPOWER 2000A/30V RECTIFIER, W/ DYNAPOWER POWER CONVERSION SYSTEM, 460V, 3PH, 60HZ, 82A, 64KVA; W/ 11' CROWN TRITON LOW PRESSURE AIR PUMP, 230/460V, 7.5HP, 4PW/ ANO-PUR ACID FILTER & PURIFICATION UNIT; W/ 500LB WALGREN HOIST & CONTROLLER; W/ 03' SUPERCHANGER CHILL WATER HEAT EXCHANGER, 100PSI @ 350F, 20F @ 100PSI; W/ WALGREN COMPUTER SYSTEM; W/ WALGREN CONTROL PANEL; W/ HOT AIR DRYER, 480V; W/ VENTILATIO DUCT & VENTS; W/ FILTER UNIT; W/ (2) AEROVENT AXIAL BLOWERS, 230-460V, 60HZ, 3PH, 3HP; W/ TRI-MER BLOWER, 480V, 3600CFM, MODEL: 222-CW-BH, 5HP MOTOR; W/ GROUNDING ELECTROPLATES; W/ (8) RACK STANDS W/ COPPER WORK BARS. OVERALL APPROX. DIMS: 66'L X 16'W (TECHEVON FAST BLACK HCB, SODIUM HYDROXIDE, DOX-620NC); (ANODIZE OR NICKEL PLATING LINE CONFIGURATION)
|
🔒 Subscribe | |
|
|
15-STATION PLATING LINE; TANK STATIONS SIZE RANGE: 48"L X 24"W X 36"DEPTH; OVERALL APPROX. LINE DIMS: 48'L X 13'W (HOIST: 59'L X 12'6"W (LEGS ON FLOOR); W/ 500LB WALGREN MANUAL HOIST & CONTROLLER; W/ LOW PRESSURE AIR BLOWER FOR AIR AGITATION
|
🔒 Subscribe | |||
|
|
BLISS | C-110 |
BLISS C-110 110-TON CAP. OBI PRESS, S/N: H64167; WITH 6 IN. STROKE, 22-1/2 IN. SHUT HEIGHT, 4 IN. ADJUSTMENT, BED AREA: 42 IN. R-L X 27 IN. F-B, 480-V, WITH TRIAD SAFETY LIGHT CURTAIN AND CONTROLLER
|
🔒 Subscribe | |
|
|
DENISON | FL35 MULTIPRESS |
DENISON FL35 MULTIPRESS HYDRAULIC PRESS WITH 15 IN. STROKE, 12 IN. THROAT, 24.75 DAYLIGHT, 3.5 IN. RAM DIA, 30-HP MOTOR, 1,800 RPM, 75-GALLON TANK CAP., 3,565 MAX. PSI, 16 IN. X 24 IN. BED, BANNER BEAM-ARRAY MACHINE GUARD, 460-V, 3-PH, 60-HZ S/N: 24097
|
🔒 Subscribe | |
|
|
APEX DENISON | FL3530HC592EHW1CR5616 |
APEX DENISON FL3530HC592EHW1CR5616 MULTIPRESS HYDRAULIC PRESS S/N: 24436; WITH 3,565 MAX. PSI, 16 IN. X 24 IN. BED SIZE, PALM BUTTONS, 762-MM SLIDE, 230-V, 3-PH, 60-HZ
|
🔒 Subscribe | |
|
|
2007 | EMCO | TURN E45 |
2007 EMCO TURN E45 CNC UNIVERSAL TURNING CENTER S/N: R2E_V02; WITH GE FANUC SERIES OI-TC CNC CONTROLS, TRAVEL IN X/Y: 160//+40/-30/310MIN; MAX TURNING DIA: 220-MM; MAX. TURNING LENGTH: 310-MM; SPINDLE DIRECTION: HORIZONTAL; 12-POSTION TOOL CHAMBER; VDI SIZE: 30; CHUCK SIZE: 180-MM; WITH 3-JAW CHUCK, KNOLL TYPE 240 S-1 CHIP CONVEYOR S/N: 325409 (2007), 400-V, 3-PH, 50/60-HZ
|
🔒 Subscribe |
|
|
BROTHER | TC-22A |
BROTHER TC-22A CNC TAPPING CENTER WITH 10-POSITION TOOL CHANGER, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10,000-RPM SPINDLE SPEED, 6,000-RPM TAPPING SPEED, TRAVELS: X-AXIS: 16.5 IN., Y-AXIS: 11.8 IN., Z-AXIS: 9.8 IN., WITH INDEXER, 7.6-KVA SPINDLE MOTOR CAP., HSK-A40 TOOL SHANK, 1,200-MIN MAX. SPINDLE ROTATION, 1/10 SPINDLE TAPER, 230-V, 3-PH, 50/60-HZ, 25-KVA MAX. S/N: 111285
|
🔒 Subscribe | |
|
|
2007 | KOMATSU | FG18SHT-20 |
2007 KOMATSU FG18SHT-20 FORK LIFT TRUCK, 1,800 LB. CAP., LP, S/N: 675562A; WITH 4-STAGE MAST, SIDE SHIFT, 9,226.6 HRS., 42 IN. FORKS
|
🔒 Subscribe |
|
|
DENISON | 35-TON CAP. MULTIPRESS |
DENISON 35-TON CAP. MULTIPRESS HYDRAULIC PRESS; WITH BANNER EZ-SCREEN2 SAFETY LIGHT CURTAIN AND CONTROLLER
|
🔒 Subscribe | |
|
|
WICKMAN | 1"-6S |
WICKMAN 1"-6S MULTIPLE SPINDLE AUTOMATIC SCREW MACHINE WITH SPINDLE STOP, BAR STOCK CARRIAGE S/N: 17366
|
🔒 Subscribe | |
|
|
BROTHER | TC-228 |
BROTHER TC-228 CNC TAPPING CENTER, 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10,000-RPM SPINDLE SPEED, 6,000-RPM TAPPING SPEED, TRAVELS: X-AXIS: 16.5 IN., Y-AXIS: 11.8 IN., Z-AXIS: 9.8 IN.; 230-V, 3-PH, 50/60-HZ, 9-KVA; WITH (2) 6 IN. MACHINE VISES, TURBO CONVEYOR 6 IN. WIDE X 6 FT. 6 IN. LONG (APPROX.) MODEL 6275-8224 CHIP CONVEYOR S/N: 311631
|
🔒 Subscribe | |
|
|
BLISS | C-60 |
BLISS C-60 60-TON CAP. OBI PRESS; WITH 1-1/2 IN. STROKE, 16-3/4 IN. SHUT HEIGHT, BED SIZE: 32 IN. X 21 IN., 32 IN. X 21 IN. X 3 IN. BOLSTER, WITH BANNER EZ-SCREEN SAFETY LIGHT CURTAIN AND CONTROLLER
|
🔒 Subscribe | |
|
|
MULTIPRESS | W5A-2 |
MULTIPRESS W5A-2 2-TON CAP. BENCH-TOP VERTICAL PNEUMATIC PRESS S/N: M-4691; RATED AT 1,273 MAX. OPERATING PSI, 5-GAL. RESEVOIR CAP., 115-V, 1-PH, 60-HZ, RELATED CONTROLS, PALM BUTTONS
|
🔒 Subscribe | |
|
|
2005 | MULTIPRESS | W6A-2 |
2005 MULTIPRESS W6A-2 BENCH-TOP VERTICAL PNEUMATIC PRESS S/N: M-5650; RATED AT 1,273 MAX. OPERATING PSI, 5-GAL. RESEVOIR CAP., 2 IN. DIAL, 115-V, 1-PH, 60-HZ, RELATED CONTROLS, PALM BUTTONS
|
🔒 Subscribe |
|
|
APEX DENISON | WR065MC204FSD366A512CF2146610030 |
APEX DENISON WR065MC204FSD366A512CF2146610030 MULTIPRESS BENCH-TOP HYDRAULIC PRESS; S/N: 23002; WITH 12 IN. STROKE, 3.25 IN. CYL. BORE, 2.25 RAM DIA., 16 IN. DAYLIGHT, 7.5 IN. THROAT, 5-HP MOTOR, 1,800 RPM, 1,450 MAX. PSI, 10-GAL. TANK, PALM BUTTONS, 460-V, 3-PH, 60-HZ
|
🔒 Subscribe | |
|
|
BROTHER | TC-227 |
BROTHER TC-227 CNC TAPPING CENTER WITH 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10,000-RPM SPINDLE SPEED, 6,000-RPM TAPPING SPEED, TRAVELS; X-AXIS: 16.5 IN., Y-AXIS: 11.8 IN., Z-AXIS: 9.8 IN., WITH INDEXER, 230-V, 3-PH, 50/60-HZ, 9-KVA S/N: 111892
|
🔒 Subscribe | |
|
|
2001 | VICTOR | 1654 DCM |
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: SS112105; WITH FANUC SERIES 20-FA CONTROLS, FLUXMASTER-V VARIABLE HOLDING CONTROL, VICTOR CONTROL PANEL, 16 IN. X 54 IN. TABLE, 4,500-RPM SPINDLE, TRAVELS: X-AXIS: 36 IN., Y-AXIS: 20 IN., Z-AXIS: 23.62 IN., 7.5-HP, AC 220-V LINE VOLT, 60-HZ, 3-PH, ALSO WITH COOLANT SYSTEM, PARTS WASHER
|
🔒 Subscribe |
|
|
HYDROMAT | 20/80 |
HYDROMAT 20/80 SPINDLE UNITS, FLANGES & VARIOUS COMPONENTS
|
🔒 Subscribe | |
|
|
HIPPO HOPPER | 2-YD. CAP. SELF-DUMPING HOPPER |
HIPPO HOPPER 2-YD. CAP. SELF-DUMPING HOPPER
|
🔒 Subscribe | |
|
|
2001 | VICTOR | 1654 DCM |
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: SS112106; WITH FANUC SERIES 20-FA CONTROLS, FLUXMASTER-V VARIABLE HOLDING CONTROL, VICTOR CONTROL PANEL, 16 IN. X 54 IN. TABLE, 4,500-RPM SPINDLE, TRAVELS: X-AXIS: 36 IN., Y-AXIS: 20 IN., Z-AXIS: 23.62 IN., 7.5-HP, AC 220-V LINE VOLT, 60-HZ, 3-PH, ALSO WITH COOLANT SYSTEM, PARTS WASHER
|
🔒 Subscribe |
|
|
2001 | VICTOR | 1654 DCM |
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: 20006053; WITH FANUC SERIES 20-FA CONTROLS, FLUXMASTER-V VARIABLE HOLDING CONTROL, VICTOR CONTROL PANEL, 16 IN. X 54 IN. TABLE, 4,500-RPM SPINDLE, TRAVELS: X-AXIS: 36 IN., Y-AXIS: 20 IN., Z-AXIS: 23.62 IN., 7.5-HP, AC 220-V LINE VOLT, 60-HZ, 3-PH, ALSO WITH COOLANT SYSTEM, PARTS WASHER
|
🔒 Subscribe |
|
|
2004 | KOCH | UV-500 SERIES D |
2004 KOCH UV-500 SERIES D ULTRA-VAC SINGLE CHAMBER VACUUM PACKAGING MACHINE S/N: 1602; 240-V, 3-PH, 60-HZ, 10-A
|
🔒 Subscribe |
|
|
COVEL | 6 IN. X 18 IN. SURFACE GRINDER |
COVEL 6 IN. X 18 IN. SURFACE GRINDER S/N: 10H-5538; CURRENTLY WITH 6 IN. X 12 IN. MAGNETIC CHUCK
|
🔒 Subscribe | |
|
|
BROTHER | TC-227 |
BROTHER TC-227 CNC TAPPING CENTER WITH 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10,000-RPM SPINDLE SPEED, 6,000-RPM TAPPING SPEED, TRAVELS; X-AXIS: 16.5 IN., Y-AXIS: 11.8 IN., Z-AXIS: 9.8 IN., WITH INDEXER, 230-V, 3-PH, 50/60-HZ, 9-KVA S/N: 111893
|
🔒 Subscribe | |
|
|
1997 | TOX | PCF-15 |
1997 TOX PCF-15 VERTICAL PNEUMATIC PRESS S/N: 77293437; RATED AT 90 PSI, WITH 3.94 IN. TOTAL STROKE, .24 IN. POWER STROKE, EZ-SCREEN SAFETY LIGHT CURTAIN, PALM BUTTONS
|
🔒 Subscribe |
|
|
STARRETT | 1175 |
STARRETT 1175 GROOVE GAGES
|
🔒 Subscribe | |
|
|
2001 | FERROMATIK MILACRON | VECTOR CH-90-R |
2001 FERROMATIK MILACRON VECTOR CH-90-R CNC VERTICAL ROTARY INJECTION MOLDING MACHINE, S/N: 3987AC2-01-1; WITH MILACRON CAMAC VSX CNC CONTROLS, 460-V, 3-PH, 60-HZ, ALSO INCLUDES: AEC WHITLOCK DEHUMIDIFYING DRYER, 440V; AEC WHITLOCK CONTROLLER, ATHENA 7-STATION HOT RUNNER (MACHINE MISSING PIECES)
|
🔒 Subscribe |
|
|
1-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
|
🔒 Subscribe | |||
|
|
PORTABLE SELF-DUMPING HOPPERS; (1) 1/2-YD. CAP., AND (1) 1-YD. CAP.
|
🔒 Subscribe | |||
|
|
1-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
|
🔒 Subscribe | |||
|
|
MITUTOYO | ROUNDNESS TEST MACHINE |
MITUTOYO ROUNDNESS TEST MACHINE WITH CONTROLLER & JOYSTICK S/N: 520102
|
🔒 Subscribe | |
|
|
1997 | CINCINNATI MILACRON | VECTOR CH-90-R |
1997 CINCINNATI MILACRON VECTOR CH-90-R CNC VERTICAL ROTARY INJECTION MOLDING MACHINE S/N: 3987A01/97-1; WITH 12 IN. CLAMP STROKE, 2.5 IN. SPM KNOCKOUT, 1.42 IN. SCREW DIA., 762-MM SLIDE, CINCINNATI MILACRON CAMAC VSX CNC CONTROLS, 460-V, 3-PH, 60-HZ, ALSO INCLUDES: AEC WHITLOCK HOPPER, AEC WHITLOCK WD SERIES PORTABLE DEHUMIDIFYING DRYER, 440-V; AEC WHITLOCK AUTO-LOADER CONTROLLER; AEC TEMPERATURE CONTROLLER
|
🔒 Subscribe |
|
|
GALBREATH | 1/2-YD. CAP. 4,000 LB. CAP. PORTABLE SELF-DUMPING HOPPERS |
GALBREATH 1/2-YD. CAP. 4,000 LB. CAP. PORTABLE SELF-DUMPING HOPPERS
|
🔒 Subscribe | |
|
|
MITUTOYO | ROUNDNESS TEST MACHINE |
MITUTOYO ROUNDNESS TEST MACHINE WITH CONTROLLER & JOYSTICK S/N: 310112
|
🔒 Subscribe | |
|
|
SENTREX |
SENTREX POWER CONDITIONER
|
🔒 Subscribe | ||
|
|
1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
|
🔒 Subscribe | |||
|
|
GALBREATH | 1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS |
GALBREATH 1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
|
🔒 Subscribe | |
|
|
BISHAMON | EZ-LOADER |
BISHAMON EZ-LOADER 3,000 LB. CAP., ELECTRIC SCISSORS LIFT TABLES WITH 43 IN. DIA. PLATFORMS
|
🔒 Subscribe | |
|
|
SONITEK | TS500 MODEL MP-554/4 |
SONITEK TS500 MODEL MP-554/4 BENCH-TOP VERTICAL THERMAL PRESS S/N: 500-0768; MULTI-ZONE TEMPERATURE CONTROLLER INTERFACE, MP SYSTEM CONTROLLER, 120-V, 15-A, 50/60-HZ
|
🔒 Subscribe | |
|
|
KELLOGG-AMERICAN |
KELLOGG-AMERICAN VERTICAL TANK MOUNTED AIR COMPRESSOR
|
🔒 Subscribe | ||
|
|
MITUTOYO AND STARRETT |
ASSORTED MITUTOYO AND STARRETT DIAL INDICATORS, ETC.
|
🔒 Subscribe | ||
|
|
ASSORTED ER TOOL COLLETS (ON PALLET)
|
🔒 Subscribe | |||
|
|
GUHRING |
GUHRING EXPANSION CHUCKS AND ROLLER BURNISHING TOOLS
|
🔒 Subscribe | ||
|
|
24 IN. X 36 IN. X 4 IN. GRANITE SURFACE PLATE
|
🔒 Subscribe | |||
|
|
MITUTOYO AND FEDERAL |
MITUTOYO AND FEDERAL DIAL INDICATORS, ETC. WITH ROLLING CART, 20 IN. X 26 IN. X 40 IN.
|
🔒 Subscribe | ||
|
|
YAMAZEN | VEGA-1000 |
YAMAZEN VEGA-1000 RAPID FEED COOLANT SYSTEM; 8-GPM, 230-V, 80-HZ, 3-PH
|
🔒 Subscribe | |
|
|
2011 | CHIPBLASTER | VEGA-1000 |
2011 CHIPBLASTER VEGA-1000 RAPID FEED COOLANT SYSTEM S/N: 2011; 8-GPM, 230-V, 80-HZ, 3-PH
|
🔒 Subscribe |
|
|
2004 | WOMACK/ROSEDALE | 1C08302P//125CBB |
2004 WOMACK/ROSEDALE 1C08302P//125CBB HIGH PRESSURE COOLANT PUMP; RATED AT 125-PSI
|
🔒 Subscribe |
|
|
2004 | WOMACK/ROSEDALE | 1C08302P//125CBB |
2004 WOMACK/ROSEDALE 1C08302P//125CBB HIGH PRESSURE COOLANT PUMP; RATED AT 125-PSI
|
🔒 Subscribe |
|
|
TRANSFORMER
|
🔒 Subscribe |
WALGREN GL50F
WALGREN GL50F 23-STATION MODEL ANODIZING LINE; WITH CLEANING STAGES: SOAK CLEANER, RINSE, ACID ACTIV...
15-STATION PLATING LINE; TANK STATIONS SIZE RANGE: 48"L X 24"W X 36"DEPTH; OVERALL APPROX. LINE DIMS
BLISS C-110
BLISS C-110 110-TON CAP. OBI PRESS, S/N: H64167; WITH 6 IN. STROKE, 22-1/2 IN. SHUT HEIGHT, 4 IN. AD...
DENISON FL35 MULTIPRESS
DENISON FL35 MULTIPRESS HYDRAULIC PRESS WITH 15 IN. STROKE, 12 IN. THROAT, 24.75 DAYLIGHT, 3.5 IN. R...
APEX DENISON FL3530HC592EHW1CR5616
APEX DENISON FL3530HC592EHW1CR5616 MULTIPRESS HYDRAULIC PRESS S/N: 24436; WITH 3,565 MAX. PSI, 16 IN...
2007 EMCO TURN E45
2007 EMCO TURN E45 CNC UNIVERSAL TURNING CENTER S/N: R2E_V02; WITH GE FANUC SERIES OI-TC CNC CONTROL...
BROTHER TC-22A
BROTHER TC-22A CNC TAPPING CENTER WITH 10-POSITION TOOL CHANGER, 23.62 IN. X 11.81 IN. TABLE WORK AR...
2007 KOMATSU FG18SHT-20
2007 KOMATSU FG18SHT-20 FORK LIFT TRUCK, 1,800 LB. CAP., LP, S/N: 675562A; WITH 4-STAGE MAST, SIDE S...
DENISON 35-TON CAP. MULTIPRESS
DENISON 35-TON CAP. MULTIPRESS HYDRAULIC PRESS; WITH BANNER EZ-SCREEN2 SAFETY LIGHT CURTAIN AND CONT...
WICKMAN 1"-6S
WICKMAN 1"-6S MULTIPLE SPINDLE AUTOMATIC SCREW MACHINE WITH SPINDLE STOP, BAR STOCK CARRIAGE S/N: 17...
BROTHER TC-228
BROTHER TC-228 CNC TAPPING CENTER, 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10,000...
BLISS C-60
BLISS C-60 60-TON CAP. OBI PRESS; WITH 1-1/2 IN. STROKE, 16-3/4 IN. SHUT HEIGHT, BED SIZE: 32 IN. X ...
MULTIPRESS W5A-2
MULTIPRESS W5A-2 2-TON CAP. BENCH-TOP VERTICAL PNEUMATIC PRESS S/N: M-4691; RATED AT 1,273 MAX. OPE...
2005 MULTIPRESS W6A-2
2005 MULTIPRESS W6A-2 BENCH-TOP VERTICAL PNEUMATIC PRESS S/N: M-5650; RATED AT 1,273 MAX. OPERATING ...
APEX DENISON WR065MC204FSD366A512CF2146610030
APEX DENISON WR065MC204FSD366A512CF2146610030 MULTIPRESS BENCH-TOP HYDRAULIC PRESS; S/N: 23002; WIT...
BROTHER TC-227
BROTHER TC-227 CNC TAPPING CENTER WITH 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10...
2001 VICTOR 1654 DCM
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: SS112105; WITH FANUC SERIES 20-FA CONTROLS, FLUXM...
HYDROMAT 20/80
HYDROMAT 20/80 SPINDLE UNITS, FLANGES & VARIOUS COMPONENTS...
HIPPO HOPPER 2-YD. CAP. SELF-DUMPING HOPPER
HIPPO HOPPER 2-YD. CAP. SELF-DUMPING HOPPER...
2001 VICTOR 1654 DCM
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: SS112106; WITH FANUC SERIES 20-FA CONTROLS, FLUXM...
2001 VICTOR 1654 DCM
2001 VICTOR 1654 DCM 3-AXIS CNC VERTICAL MILL S/N: 20006053; WITH FANUC SERIES 20-FA CONTROLS, FLUXM...
2004 KOCH UV-500 SERIES D
2004 KOCH UV-500 SERIES D ULTRA-VAC SINGLE CHAMBER VACUUM PACKAGING MACHINE S/N: 1602; 240-V, 3-PH, ...
COVEL 6 IN. X 18 IN. SURFACE GRINDER
COVEL 6 IN. X 18 IN. SURFACE GRINDER S/N: 10H-5538; CURRENTLY WITH 6 IN. X 12 IN. MAGNETIC CHUCK...
BROTHER TC-227
BROTHER TC-227 CNC TAPPING CENTER WITH 10-POSITION TURRET, 23.62 IN. X 11.81 IN. TABLE WORK AREA, 10...
1997 TOX PCF-15
1997 TOX PCF-15 VERTICAL PNEUMATIC PRESS S/N: 77293437; RATED AT 90 PSI, WITH 3.94 IN. TOTAL STROKE,...
STARRETT 1175
STARRETT 1175 GROOVE GAGES...
2001 FERROMATIK MILACRON VECTOR CH-90-R
2001 FERROMATIK MILACRON VECTOR CH-90-R CNC VERTICAL ROTARY INJECTION MOLDING MACHINE, S/N: 3987AC2-...
1-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
PORTABLE SELF-DUMPING HOPPERS; (1) 1/2-YD. CAP., AND (1) 1-YD. CAP.
1-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
MITUTOYO ROUNDNESS TEST MACHINE
MITUTOYO ROUNDNESS TEST MACHINE WITH CONTROLLER & JOYSTICK S/N: 520102...
1997 CINCINNATI MILACRON VECTOR CH-90-R
1997 CINCINNATI MILACRON VECTOR CH-90-R CNC VERTICAL ROTARY INJECTION MOLDING MACHINE S/N: 3987A01/9...
GALBREATH 1/2-YD. CAP. 4,000 LB. CAP. PORTABLE SELF-DUMPING HOPPERS
GALBREATH 1/2-YD. CAP. 4,000 LB. CAP. PORTABLE SELF-DUMPING HOPPERS...
MITUTOYO ROUNDNESS TEST MACHINE
MITUTOYO ROUNDNESS TEST MACHINE WITH CONTROLLER & JOYSTICK S/N: 310112...
SENTREX
SENTREX POWER CONDITIONER...
1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
GALBREATH 1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS
GALBREATH 1/2-YD. CAP. PORTABLE SELF-DUMPING HOPPERS...
BISHAMON EZ-LOADER
BISHAMON EZ-LOADER 3,000 LB. CAP., ELECTRIC SCISSORS LIFT TABLES WITH 43 IN. DIA. PLATFORMS...
SONITEK TS500 MODEL MP-554/4
SONITEK TS500 MODEL MP-554/4 BENCH-TOP VERTICAL THERMAL PRESS S/N: 500-0768; MULTI-ZONE TEMPERATURE ...
KELLOGG-AMERICAN
KELLOGG-AMERICAN VERTICAL TANK MOUNTED AIR COMPRESSOR...
MITUTOYO AND STARRETT
ASSORTED MITUTOYO AND STARRETT DIAL INDICATORS, ETC....
ASSORTED ER TOOL COLLETS (ON PALLET)
GUHRING
GUHRING EXPANSION CHUCKS AND ROLLER BURNISHING TOOLS...
24 IN. X 36 IN. X 4 IN. GRANITE SURFACE PLATE
MITUTOYO AND FEDERAL
MITUTOYO AND FEDERAL DIAL INDICATORS, ETC. WITH ROLLING CART, 20 IN. X 26 IN. X 40 IN....
YAMAZEN VEGA-1000
YAMAZEN VEGA-1000 RAPID FEED COOLANT SYSTEM; 8-GPM, 230-V, 80-HZ, 3-PH...
2011 CHIPBLASTER VEGA-1000
2011 CHIPBLASTER VEGA-1000 RAPID FEED COOLANT SYSTEM S/N: 2011; 8-GPM, 230-V, 80-HZ, 3-PH...
2004 WOMACK/ROSEDALE 1C08302P//125CBB
2004 WOMACK/ROSEDALE 1C08302P//125CBB HIGH PRESSURE COOLANT PUMP; RATED AT 125-PSI...
2004 WOMACK/ROSEDALE 1C08302P//125CBB
2004 WOMACK/ROSEDALE 1C08302P//125CBB HIGH PRESSURE COOLANT PUMP; RATED AT 125-PSI...
TRANSFORMER