Surplus Plastics Machinery Equipment Injection Molders Granulators Tool Shop and More
Category: PLASTICS PROCESSING EQUIPMENT
Total Lots:
173
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2015 | ENGEL | VICTORY 750H/330V/240 |
2015 ENGEL VICTORY 750H/330V/240 INJECTION MOLDING MACHINE W/ ROTARY TABLE US TONS: 247 | SHOT SIZE PRIMARY: 12.59 OZ. | SHOT SIZE VERTICAL ADDON: 4.3 OZ. | OPENING STROKE: 29.8" (758MM) | EJECTOR STROKE: 7" (180MM) | EJECTOR FORCE: 9 TONS (80KN) | PLATEN SIZE: 38.58" (980MM) | MIN MOLD SIZE: 20.67"X20.67" (525MMX525MM) | DAYLIGHT: 41.34" (1050MM) | MIN/MAX MOLD: 11.81"/29.53" (300/750) | VOLTAGE: 480/3/60 | CONTROL: CC300 | S/N: 202016
|
🔒 Subscribe |
|
|
2002 | HUSKY | QD2350 RS200/200 |
2002 HUSKY QD2350 RS200/200 INJECTION MOLDING MACHINE TONNAGE: 2500 TONS | SHOT SIZE: 1063 OZ | TIEBAR SPACING: 78.75" X 63.39" | PLATEN SIZE: 112.2" X 96.46" | SCREW DIAMETER: 200 MM | SCREW L/D: 21.7 EST. | TYPE: 2 PLATEN | MAX DAYLIGHT: 4300 MM (169.29") | MIN SHUT HEIGHT: 1000 MM (39.37") | STROKE: 3300 MM (129.9") | EJECTION: 350 MM (13.77") | CORE PULLS: 2 MOVING PL., 3 STATIONARY PL. | NOTES: REBUILT PUMPS, VALVES AND MOTOR S/N: 200246
|
🔒 Subscribe |
|
|
2013 | HAITIAN | IAPETUS 2-SHOT WITH ROTARY PLATEN |
2013 HAITIAN IAPETUS 2-SHOT WITH ROTARY PLATEN INJECTION MOLDING MACHINE - TONNAGE: 405 | SHOT SIZES: 16.12 OZ & 6.14 OZ | CONTROL: KEBA 2580 | VOLTAGE: 460/4/60 | SPACE BETWEEN TIEBARS: 39.7" X 24.8" | CLAMP STROKE: 20.86" | MAX. MOLD HEIGHT: 22.44" | MIN. MOLD HEIGHT: 8.66" | ROBOT INTERFACE: EUROMAP 67 | HOURS: MINIMAL TO ZERO | MACHINE OPTIONS: ROTARY PLATEN, 2 AIR CIRCUITS ON MOVABLE PLATEN, 2 CORE PULLS ON MOVEABLE PLATEN, HYDRAULIC VALVE GATE (2) CIRCUITS IN KEBA 2580, STANDARD UL CONFIGURATION, 2 AIR MANIFOLDS WITH 8 PORT, SPI KNOCKOUT PATTERN, METRIC MOLD MOUNTING HOLES, TRIPLE R OIL FILTRATION SYSTEM | INCLUDES: 2 ADDITIONAL "A" SCREWS 10.72 OZ & 3.92 OZ.
|
🔒 Subscribe |
|
|
2015 | TS/125 |
2015 TS/125 HULL TRANSFER PRESS MAX. CLAMP TONNAGE: 125 TONS | MAX. TRANSFER TONNAGE: 35 TONS | MAX. CLAMP WORKING PRESSURE: 2490 PSI | MAX. TRANSFER WORKING PRESSURE: 2490 PSI | DIE SPACE DIM.: 20" X 30" | MIN. MOLD HEIGHT DIM.: 48.5" | OVERALL HEIGHT DIM.: 156" APPROXIMATELY | HEIGHT TO SHUTTLE PLATE DIM.: 36" | FLOOR SPACE DIM.: 75" X 200" | LENGTH OF CLAMP STROKE: 20" | LENGTH OF TRANSFER RAM STROKE: 21" | LENGTH OF DAYLIGHT PRESS OPEN: 68" | PRESS MOTOR: 25 HP | PRESS MOTOR VOLTAGE: 480/3/60 | CONTROL VOLTAGE: 115/1/60 | PRESS HEAT(PER MOLD HALF): 10KW | S/N: 13606
|
🔒 Subscribe | |
|
|
CINCINNATI | T600 |
CINCINNATI T600 5 LBS. DUAL-HEAD BLOW MOLDING MACHINE | PLATEN SIZE: 52"X40" | HEAD SIZE: 5 LBS | TYPE: DUAL HEAD | CLAMP FORCE: 66 TON MAX | DAYLIGHT MIN/MAX: 10"/45" | HOURS: 31170 | VOLTAGE: 480 | CONTROL: 486C
|
🔒 Subscribe | |
|
|
TOSHIBA |
310 TON 19 OZ. TOSHIBA INJECTION MOLDING MACHINE - CLAMPING FORCE: 310 TONS | SHOT SIZE: 19 OZ. | SCREW DIAMETER: 55MM | TIE BAR CLEARANCE: 24" X 22" | PLATEN (H X W): 34.2" X 32.2" | DAY LIGHT MIN./MAX.: 11.75" X 41.7" | CONTROLS: INJECTVISOR V21 CONTROL | INCLUDES: AIR BLOW, CP, ROBOT INTERFACE
|
🔒 Subscribe | ||
|
|
2015 | HAITIAN/ZHAFIR | VE II 900/120-B |
2015 HAITIAN/ZHAFIR VE II 900/120-B INJECTION MOLDING MACHINE | 101.2 TON, 1.83 OZ., CLAMPING FORCE: 101.2 | TOGGLE STROKE: 12.6" | MIN. MOLD HEIGHT: 5.91" | MAX. MOLD HEIGHT: 16.14" | SPACE BETWEEN TIE BARS (HXV): 16.54" X 14.57" | MIN. MOLD DIMENSION: 10.63" X 9.45" | EJECTOR STROKE: 3.15" | EJECTOR FORCE: 2.2" | MOLD PLATEN DIMENSIONS (HXV): 24.21" X 22.44" | VOLTAGE: 460/3/60"
|
🔒 Subscribe |
|
|
2004 | KRAUSS MAFFEI | 300-1900C2 |
2004 KRAUSS MAFFEI 300-1900C2 331 TON, 33.6 OZ. W/ "L" BOLT ON INJECTION UNIT AND ROTARY TABLE US TONNAGE: 331 | SHOT SIZE: 33.6 OZ. | SCREW DIAMETER: 70MM | DISTANCE BETWEEN TIE BARS: 24.8" X 24.8" (630MMX630MM) | PLATEN SIZE: 39.17"X31.33" (995MMX1050MM) | DAYLIGHT: 45.27" (1150MM) | MIN MOLD HEIGHT: 12.99" (330MM) | EJECTOR STROKE: 7.71" (200MM) | VOLTAGE: 460/3/60 | INCLUDES: ROTARY TABLE (33.465" DIAMETER) | ADD ON UNIT SHOT SIZE: 6.9 OZ | ADD ON UNIT SCREW DIAMETER: 40 MM | ADD ON UNIT VOLTAGE: 460/3/60 S/N: 610050131
|
🔒 Subscribe |
|
|
CONAIR | 1831 |
CONAIR 1831 GRANULATOR HP: 40 | THROUGHPUT: 2000 LBS/HR | CUTTING CHAMBER: 18" X 31" | ROTOR: OPEN | SCREEN: 3/8" | BLADES: 3 ROTATING, 2 BED | VOLTAGE: 460/3/60| MODEL: CK-1831| SERIAL NUMBER: RA 70.1026
|
🔒 Subscribe | |
|
|
CONAIR | 1831 |
CONAIR 1831 GRANULATOR HP: 40 | THROUGHPUT: 2000 LBS/HR | CUTTING CHAMBER: 18" X 31" | ROTOR: OPEN | SCREEN: 3/8" | BLADES: 3 ROTATING, 2 BED | VOLTAGE: 460/3/60| MODEL: CK-1831| SERIAL NUMBER: RA 70.1026
|
🔒 Subscribe | |
|
|
MULTITECH | HMM-10T |
MULTITECH HMM-10T 10 TON INJECTION MOLDING MACHINE TONNAGE: 10 | SHOT SIZE: 0.455 OZ | SCREW DIAMETER: 16 MM | THEORETICAL INJECTION VOLUME: 0.86 IN^3 | INJECTION FLOW (MAX): 1.71 IN^3/S | INJECTION PRESSURE: 28151 PSI | INJECTION STROKE: 2.75 IN | INJECTION SPEED (MAX): 5.5 IN/SEC | RPM: 300 | PLASTICIZING RATE (PS): 0.0917 OZ/SEC | NUMBER OF HEATERS: 3 | MAX MOLD OPEN FORCE: 1.19 TONS | MIN MOLD THICKNESS: 1.97 (4.33) IN | MAX OPENING DAYLIGHT: 7.87 (10.24) IN | MAX MOLD DIMS (WXH): 10.62 X 7.09 IN | MIN MOLD DIMS (WXH): 3.54 X 3.54 IN | EJECTOR FORCE: 0.48 | EJECTOR STROKE: 1.38 | TOTAL ELECTRIC CAPACITY: 6.2 KW | MOTOR POWER: 3.75 KW | HEATER POWER: 1.83 KW | CONTROL POWER: 0.8 KW | COOLING WATER: 1.6 GPM | OIL CAPACITY: 10.56 GAL | WEIGHT: 1653 LBS | MOTOR VOLTAGE: 460/3/60 | MOTOR KW: 3.75| NPE SHOW MACHINE S/N: GD1804101
|
🔒 Subscribe | |
|
|
2014 |
2014 35 TON 1.0 OZ. BOY INJECTION MOLDING MACHINE CLAMPING FORCE: 35 TONS | SHOT SIZE: 1.0 OZ. | SCREW DIAMETER: 22 MM | TIE BAR CLEARANCE: 11" X 10" | PLATEN(HXW): 15.75" X 15.75" | DAY LIGHT MIN./MAX.: 7.875" X 19.625" | CLAMP STROKE: 11.8" | EJECTOR STROKE: 3.14" | VOLTAGE: 230V | CONTROL: PROCAN ALPHA
|
🔒 Subscribe | ||
|
|
2015 | MULTITECH | V85R2-GK-LSR |
2015 MULTITECH V85R2-GK-LSR 85 TON MULTITECH(LSR) TYPE: VERTICAL/VERTICAL; 2-STATION LSR | TONNAGE: 85 | THEORETICAL INJECTION VOLUME: 28 CM^3 | SCREW DIAMETER: 18MM | CLAMP STROKE: 11.8" | MIN MOLD THICKNESS: 6.69" | MAX MOLD SIZE: 15.74" X 15.74" | TABLE SIZE DIAMETER: 46" | MAX DAYLIGHT: 18.5" | VOLTS: 460 | CONTROL: KEBA | INCLUDES: LSR BARREL & SCREW SET; MULTI-STATE MOLD ELECTRIC TEMP CONTOLLER; 230V HEATER CIRCUIT - 9 ZONES; 8 WATER CIRCUITS COOLING & FLOW METER; LIGHT CURTAIN W/ EXTENDED GUARDS; MECHANICAL SAFETIES & DROP BAR; US EJECTOR 3.5"; VACUUM CIRCUIT FOR LSR APPLICATIONS | NOTES: HAS BEEN A DISPLAY MODEL IN OUR SHOWROOM SINCE NPE 2015, ALMOST NO HOURS S/N: 15112798
|
🔒 Subscribe |
|
|
BATTENFELD | BA 350V/50H-R |
BATTENFELD BA 350V/50H-R 40 TON VERTICAL INJECTION MOLDING MACHINE, 4-STATION ROTARY, TONNAGE: 40, SHOT SIZE: 1.38 OZ., SCREW DIAMETER: 25MM, SCREW STROKE: 3.46", OPENING STROKE: 11.81", MIN MOLD HEIGHT: 5.9", PLATEN SIZE: 18.5" X 26", TIEBAR DISTANCE: 12.67" X 10.72", MAX DAYLIGHT: 17.71", EJECTOR STROKE: 7.48", VOLTAGE: 460/3/60, CONTROL: UNILOG 4000 B, S/N: 25885
|
🔒 Subscribe | |
|
|
NELMOR | G2030 |
NELMOR G2030 GRANULATOR HORSE POWER: 50 | NUMBER OF ROTATING KNIVES: 10 | BED KNIVES: 4 | FEED THROAT SIZE: 21"X30" | TYPE: CLOSED ROTOR SYSTEM | SCREEN: 3/8" | INCLUDES: TOP FEED CHUTE
|
🔒 Subscribe | |
|
|
GLUCO | VS100TPS |
GLUCO VS100TPS VERTICAL PRESS TONNAGE: 100 | SHOT SIZE: 8 OZ. | TOGGLE STROKE: 12" | ADJUSTABLE DAYLIGHT: 8" CLOSED, 20" OPEN | PLATEN SIZE FRONT/BACK: 20" | PLATEN SIZE LEFT/RIGHT: 28" | CONTROL: ALLEN BRADLEY PANELVIEW PLUS 1000 | VOLTAGE: 480 | MODEL: VS100TPS | SERIAL NUMBER: 14526
|
🔒 Subscribe | |
|
|
MULTITECH | SILCOSTAR 923 |
MULTITECH SILCOSTAR 923 METERING PUMP | VISCOSITY: 1,000,000 MPAS | PROCESSING CAPACITY: 1500G/MIN (DEPENDING ON VISCOSITY) | MIX RATIO: 1:1 (OPTIONAL / VARIABLE FACTOR +/- 5% | COLOR MANAGEMENT: 0.3 ~ 4% | DRIVE: HYDRAULIC | ELECTRIC: 175 ~ 275 VAC / 300 ~ 480 VAC, MAX 10A | PNEUMATIC: R1/4 6 BAR. LOW CONSUMPTION | S/N: M-140802
|
🔒 Subscribe | |
|
|
2017 | HILECTRO | XTA-1800ID |
2017 HILECTRO XTA-1800ID ROBOT - HILECTRO XTA-1800ID ROBOT | X-AXIS: 2500 MM | Y-AXIS: 1800 MM | Z-AXIS: 1500 MM | PNEUMATIC C-AXIS: YES | PAYLOAD: 35 KG | VOLTAGE: 220/3/60 | S/N: A18ID00704001
|
🔒 Subscribe |
|
|
2014 | ENGEL | IN 200V/40 XS RO |
2014 ENGEL IN 200V/40 XS RO 50 TON, 2.2 OZ. VERTICAL RUBBER INJECTION MOLDING MACHINE US TONS: 50 | SHOT SIZE: 2.2 OZ. | SCREW DIAMETER: 25 MM | L/D: 24 | TABLE DIAMETER: 900 MM | TABLE CONFIGURATION: 2X180 DEGREES OR 3X120 DEGREES | MIN/MAX MOLD HEIGHT: 190MM/590MM | CONTROL: CC200 | VOLTAGE: 460/3/60 S/N: 195485
|
🔒 Subscribe |
|
|
2000 | KRAUSS MAFFEI | 110-390 C2 |
2000 KRAUSS MAFFEI 110-390 C2 INJECTION MOLDING MACHINE TONNAGE: 121 US | SHOT SIZE: 1.7 OZ. | SCREW DIAMETER: 25MM | OPENING STROKE: 23.62'' | MIN MOLD HEIGHT: 11.81'' | PLATEN SIZE: 29.33'' X 30.31'' | TIE BAR DISTANCE: 18.5'' X 18.5'' | MAX DAYLIGHT: 35.43'' | EJECTOR STROKE: 5.91'' | OPTIONS: CORE PULL, ROBOT INTERFACE, ACCUMULATOR S/N: 61005619
|
🔒 Subscribe |
|
|
2015 | ASIAN PLASTICS | SM90TSV |
2015 ASIAN PLASTICS SM90TSV INJECTION MOLDING MACHINE: 99 TON, 3.7 OZ., CLAMPING FORCE: 99 TONS | SHOT SIZE: 3.7 OZ. | SCREW DIA.: 31MM | OPENING STROKE: 10.63" | MAX. DAYLIGHT: 24.41" | MOLD HEIGHT MIN.: 4.92" | MOLD HEIGHT MAX.: 13.78" | SPACE BETWEEN TIE BAR: 14.17" X 14.17" | PLATEN DIMENSION (H X V): 20.87" X 20.87" | HYDRAULIC EJECTOR: 3.3 TONS X 3.54" | VOLTAGE: 480/3/60 | S/N: 29339
|
🔒 Subscribe |
|
|
ENGEL |
ENGEL MAGNETIC PLATEN FOR 300 TON TIEBARLESS MAX. CLAMPING FORCE WITH 35.4" X 19.7" MOLD (H X V ): 307 KN | CLAMPING FORCE WITH 15.7" X 15.7" MOLD (H X V): 114 KN | CLAMPING FORCE WITH 20" X 20" MOLD (H X V): 193 KN | CONTROL UNIT TYPE: BURPMG10-480VAC | INTERFACE: E70.0 + PMG8 TYPE S/N: US126139-2
|
🔒 Subscribe | ||
|
|
2004 | KRAUSS MAFFEI | KM110-520-C2 |
2004 KRAUSS MAFFEI KM110-520-C2 INJECTION MOLDING MACHINE CLAMPING FORCE: 121 TONS | SHOT SIZE: 8.82 OZ. | SCREW DIAMETER: 1.7" | TIE BAR DISTANCE: 17.32" X 18.50" | MAX. DAYLIGHT: 35.4" | OPENING STROKE: 23.6" | DISTANCE BETWEEN TIE BARS: 18.5" X 18.5" | MOLD SIZE: 29.3" X 30.3" | CONTROL: MC4 S/N: 114781
|
🔒 Subscribe |
|
|
ENGEL |
ENGEL MAGNETIC PLATEN FOR 300 TON TIEBARLESS MAX. CLAMPING FORCE WITH 35.4" X 19.7" MOLD (H X V ): 307 KN | CLAMPING FORCE WITH 15.7" X 15.7" MOLD (H X V): 114 KN | CLAMPING FORCE WITH 20" X 20" MOLD (H X V): 193 KN | CONTROL UNIT TYPE: BURPMG10-480VAC | INTERFACE: E70.0 + PMG8 TYPE S/N: US126139-1
|
🔒 Subscribe | ||
|
|
CONAIR | CD200 |
CONAIR CD200 DRYER - CFM: 150 | DRYING TEMP: 160-375F | ACHIEVABLE DEW POINT: -40F | DESICCANT CARTRIDGES: 3 | THROUGHPUT (PC): 250 LBS/HR | CONTROL: COMPU-DRY | VOLTAGE: 480/3/60 | INCLUDES: AFTERCOOLER
|
🔒 Subscribe | |
|
|
CUMBERLAND | 1620X |
CUMBERLAND 1620X GRANULATOR CUTTING CHAMBER: 16"X20" | MOTOR HP: 25 | THROUGHPUT: 900 LBS/HR | ROTOR KNIFES: 3 KNIFE OPEN W/ ROTATING END DISCS | DISCHARGE: 6" | RPM: 1740 | VOLTAGE: 460/3/60 | MODEL: 1620X | S/N: CA083000A-07055
|
🔒 Subscribe | |
|
|
NELMOR |
7.5 HP NELMOR GRANULATOR - HP: 7.5 HP | FRONT FEED OPENING: 10" X 12" | ROTOR: OPEN | BLADES: 3 | PHASE: 3 | HZ: 60 | VOLTS: 230/460
|
🔒 Subscribe | ||
|
|
1999 | BATTENFELD | BA1000/315 CDK-SE |
1999 BATTENFELD BA1000/315 CDK-SE 110 TON ELECTRIC INJECTION MOLDING MACHINE. TONNAGE: 110 | SHOT SIZE: 4.94 OZ. | SCREW DIAMETER: 35MM | OPENING STROKE: 13.9'' | MIN/MAX MOLD HEIGHT: 7.87''/17.7'' | PLATEN SIZE: 25.2'' X 25.2'' | TIE BAR DISTANCE: 16.5'' X 16.5'' | VOLTAGE: 460/3/60 | CONTROL: TC40 | TYPE: FOR HIGH TEMPERATURE ENGINEERING RESINS (TEFLON) | OPTIONS: AK+ SCREW & BARREL, INTEGRATED VACUUM PUMP, METAL SEPARATOR, ENHANCED SPC PACKAGE, FIBER OPTIC MELT PRESSURE TRANSDUCER, QVA MODULE W/ BNC SOCKET FOR CAVITY PRESSURE CONTROLLED INJECTION, 600F MOKON DUAL ZONE HOT OIL THERMOLATOR, 12-ZONE HOT RUNNER CONTROL, HUBBELL CIRCUIT LOCK RECEPTACLES, AUTO CENTRAL LUBRICATION S/N: 22.681
|
🔒 Subscribe |
|
|
2000 | GIDDINGS & LEWIS | 8000 |
2000 GIDDINGS & LEWIS 8000 CONTROL: G & L 8000 PENDANT CONTROL | DRIVE: SIEMENS DRIVES |VOLTAGE: 460/3/60 | INPUT AMPS - FULL LOAD: 260 | AMPS- LARGEST MOTOR: 60.5 | MAIN C.B. RATING: 300 | MAIN C. B. INTERRUPTING CAPACITY: 30,000 | CONTROL VOLTS: 115 | AMBIENT TEMPERATURE RANGE: 10C - 50C | HUMIDITY RANGE: 5% - 95% | EQUIPPED WITH: ELECTRICAL CABINET, LINEAR INDUCTION SCALES, POWER SUPPLY CORES | MODEL: CNC8000 S/N: 465-0022
|
🔒 Subscribe |
|
|
2016 | AEC | PSA-3.5 |
2016 AEC PSA-3.5 3.5 TON AIR-COOLED CHILLER S/N: 46A0006 | COMPRESSOR: 3.5 HP | TYPE: AIR-COOLED | REFRIGERANT: 410A | VOLTAGE: 480/3/60
|
🔒 Subscribe |
|
|
MICRO PRINT | MSS350-MS250 |
MICRO PRINT MSS350-MS250 2-STATION PAD PRINTER STATIONS: MSS35 & MS250 | PLATE SIZE CLOSED: 260X250MM & 400X250MM | PLATE SIZE OPEN: 250X120MM | PLATE SIZE TRANSVERSE DOCTORING UNIT: 430X100MM | DRIVE: PNEUMATIC | PRINTING FORCE: 750N & 1100N S/N: 0110-0232
|
🔒 Subscribe | |
|
|
2017 | ARI | X-650 |
2017 ARI X-650 SPRUE PICKER | TYPE: SINGLE STAGE | IMM RANGE: 100-180 TONS | VERTICAL STROKE: 650 MM | CROSSWISE STROKE: 120 MM | SWING ANGLE: 50-90 | GRIPPER ANGLE: 90 | MAX. LOAD: 2 KG | DRIVE SYSTEM: PNEUMATIC | WORKING AIR PRESSURE: 5-7 KG/CM2 | AIR CONSUMPTION: 7.6 NL/CYCLE | POWER CONSUMPTION: 0.2 KVA | POWER SUPPLY: 120-240 VAC / 1PH / 60 HZ | WEIGHT: 43 KG S/N: 103991
|
🔒 Subscribe |
|
|
CONAIR SEPRO ROBOT | PIP 3041 |
CONAIR SEPRO ROBOT PIP 3041 X-AXIS: APPROX. 3500MM | Y-AXIS: 950MM | Z-AXIS: 2000MM | PAYLOAD: 20 KG | CONTROL: MPA-II CONTROL| IMM CAPACITY: 1500 TONS | PRESSURE CIRCUITS: 3 | VACUUM CIRCUITS: 2| MODEL: PIP 3041| SERIAL NUMBER: 99-11 6464
|
🔒 Subscribe | |
|
|
CONAIR SEPRO | PIP 3041 |
CONAIR SEPRO PIP 3041 ROBOT X-AXIS: 6500 | Y-AXIS: 950 | Z-AXIS: 2000 | PAYLOAD: 20 KG | PRESSURE CIRCUITS: 2 | VACUUM CIRCUIT: 1 | CONTROL: S 900-II| MODEL: PIP 3041| SERIAL NUMBER: 2000-01 6722
|
🔒 Subscribe | |
|
|
3 HP RAPID AUGER GRANULATOR GRANULATOR MOTOR: 3 HP (2.2KW) | CUTTER-HOUSING OPENING: 7.08"X10.23" | AUGER FEED OPENING: 12" X 14" | AUGER SCREW SIZE: 6.5" | AUGER MOTOR: 1 HP | ROTATING KNIVES: 3X3 | FIXED KNIVES: 2X1 | MODEL: N/A | SERIAL NUMBER: 71188.003
|
🔒 Subscribe | |||
|
|
3 HP RAPID AUGER GRANULATOR GRANULATOR MOTOR: 3 HP (2.2KW) | CUTTER-HOUSING OPENING: 7.08"X10.23" | AUGER FEED OPENING: 12" X 14" | AUGER SCREW SIZE: 6.5" | AUGER MOTOR: 1 HP | ROTATING KNIVES: 3X3 | FIXED KNIVES: 2X1 | MODEL: N/A | SERIAL NUMBER: 71187.003
|
🔒 Subscribe | |||
|
|
2001 | GIDDINGS & LEWIS | 360P |
2001 GIDDINGS & LEWIS 360P CNC IN-FEEDING ROTARYTABLE TABLE SIZE X: 72" | TABLE SIZE Y: 72" | CNC CONTROL: NO | CAPACITY: 44,000 LBS. | RPM: 1 | POSITIONS: 360,000 | T-SLOTTED | SLIDE: 72" X 78" | CAPACITY: 70,000 | TRAVEL: 48" W-AXIS TRAVEL |DIMENSIONS: 72" X 78" | WEIGHT: 65000 LBS. | EQUIPPED WITH: ROTARY & LINEAR HYDROSTATIC WAYS, POSITIONING ONLY, "B"-AXIS, TWIN PINION DRIVE, SIEMENS B & W AXES SERVO MOTORS (NO DRIVES), WAY COVERS, W-AXIS, AUTOMATIC LUBRICATION SYSTEM, SERVICE MANUAL AND DRAWINGS, TOTAL HEIGHT ROTARY & AUXILIARY SLIDE 48.5" | SERIAL NUMBER: N/A
|
🔒 Subscribe |
|
|
VESTIL | HDD-48-7-P |
VESTIL HDD-48-7-P HYDRAULIC DRUM DUMPER UNIFORM CAPACITY: 750 LBS. | DUMP HEIGHT: 48" | ROTATION HEIGHT CLEARANCE: 116-3/4" | LEVEL HEIGHT: 72-1/2" | ACCEPTS: 30 AND 55 GALLON DRUMS | MOTOR HP: 3/4 HP | VOLTAGE: 115/1/60 | POWER CORD LENGTH: 8 FT. | HAND HELD CONTROL CORD LENGTH: 8 FT. | DRUM ROTATION: 135 | DUMP ANGLE: 45 | CHUTE DIAMETER: 24" | RAISE TIME: 34 SEC. | MOTOR STYLE: 56 FRAME | CYLINDER DIAMETER: 2-1/2" | CYLINDER LENGTH: 18" | CHUTE REACH: 14" | RIGID CASTERS QUANTITY/DIAMETER/WIDTH | (2) 8" X 2" | SWIVEL CASTER QUANTITY/DIAMETER/WIDTH: (2) 6" X 2" S/N: S1326370
|
🔒 Subscribe | |
|
|
LOGIC SEAL | VT-2600 L |
LOGIC SEAL VT-2600 L LEAK STOPPER MOTOR HP: 1.5 | GPM: 50 | MAX TEMP: 260F | AMPS: 13.2 | HEATERS: 6 | VOLTAGE: 240/3/60 S/N: 060927-V26L
|
🔒 Subscribe | |
|
|
MILACRON | CMS 68 |
MILACRON CMS 68 GRANULATOR HP: 5 | FEED THROAT: 6"X8" | ROTATING BLADES: 2 | BED KNIFE: 1 | VOLTAGE: 460 S/N: 3935A01 88 41
|
🔒 Subscribe | |
|
|
SORGEL |
150 KVA SORGEL TRANSFORMER KVA: 150 | HZ: 60 | %IZ: 5.6 | H.V.: 480 H.V. AMPS: 180 | WT: 1020 | CLASS: AA | L.V.: 240 | L.V. AMPS: 361 | RISE: 150C | INS. SYSTEM: 220C | MODEL: N/A | SERIAL NUMBER: N/A
|
🔒 Subscribe | ||
|
|
CANAM | SD200 |
CANAM SD200 JUST-IN-TIME DRYERS, FEED THROAT MOUNTED | S/N: 17123 | CAPACITY: 0.8 CU/FT | MAX. TEMPERATURE: 425F | HOPPER CAPACITY (OF PA): 18 LBS. | POWER: 2.0 KW | VOLTAGE: 240 VAC / 1 PH | BASE: 6" X 6" | DIAMETER: 10" | WIDTH (INCLUDING CONTROL CABINET): 15" | HEIGHT: 29" | WEIGHT: 50 LBS.
|
🔒 Subscribe | |
|
|
CONAIR | SR 4030 A3 |
CONAIR SR 4030 A3 ROBOT X-AXIS: 2000MM | Y-AXIS: 800MM | Z-AXIS: 1400MM | WRIST ROTATION: 0-90 | PAYLOAD: 26 LBS. | MAX IMM CAPACITY: 1000 TONS | CONTROL: VISUAL | S/N: P09840 **PENDANT NOT WORKING**
|
🔒 Subscribe | |
|
|
MOKON | HT450910 |
MOKON HT450910 TEMPERATURE CONTROL UNIT HP: 0.75 | TOTAL KW: 9.2 | MAX TEMP: 250 F | VOLTAGE: 460/3/60 S/N: 7003213
|
🔒 Subscribe | |
|
|
CANAM | SD1500 |
CANAM SD1500 0.5 CU/FT. JUST-IN-TIME DRYERS, FEED THROAT MOUNTED | S/N: 0416-95 | CAPACITY: 0.5 CU/FT | MAX. TEMPERATURE: 425F | HOPPER CAPACITY (OF PA): 14 LBS. | POWER: 1.5 KW | VOLTAGE: 240 VAC / 1 PH | BASE: 6" X 6" | DIAMETER: 10" | WIDTH (INCLUDING CONTROL CABINET): 15" | HEIGHT: 24" | WEIGHT: 40 LBS.
|
🔒 Subscribe | |
|
|
CANAM | SD200 |
CANAM SD200 JUST-IN-TIME DRYERS, FEED THROAT MOUNTED S/N: 18135 | CAPACITY: 0.8 CU/FT | MAX. TEMPERATURE: 425F | HOPPER CAPACITY (OF PA): 18 LBS. | POWER: 2.0 KW | VOLTAGE: 240 VAC / 1 PH | BASE: 6" X 6" | DIAMETER: 10" | WIDTH (INCLUDING CONTROL CABINET): 15" | HEIGHT: 29" | WEIGHT: 50 LBS.
|
🔒 Subscribe | |
|
|
HUSKY RACK & WIRE |
5 SECTIONS TEAR DROP STEEL RACKS | 6 - UPRIGHTS 192 X 42 | 20 - BEAMS 2 X 6 | HUSKY RACK & WIRE
|
🔒 Subscribe | ||
|
|
2017 | MORETTO | TWK9S'S' |
2017 MORETTO TWK9S'S' WATER TEMPERATURE COOLER S/N: 1714959 | TEMPERATURE RANGE: 95C | MEDIUM: WATER | CONTENT: 12 LITERS | HEATING: 9 KW | COOLING CAPACITY: 35 KW | PUMP MOTOR: 1 KW | LEAKAGE GENERATION: STANDARD | MAX. PUMP FLOW: 60 L/MIN | MAX. PUMP PRESSURE: 5.2 BAR | PROCESS CONNECTIONS: 4 X 1/2" | COOLING WATER CONNECTIONS: 1/2" | DIMENSIONS(W X L X H): 9.33" X 29.53" X 23"
|
🔒 Subscribe |
|
|
REX ROTH | 970661-01/98 |
REX ROTH 970661-01/98 HYDRAULIC UNIT HP: 3 | RESERVOIR CAPACITY: 15 GAL | OPERATING PRESSURE SHELL: 250 PSI | OPERATING PRESSURE TUBES: 150 PSI | TEMPERATURE: 350F | VOLTAGE: 460/3/60 S/N: 43AKAG-10054-0-C
|
🔒 Subscribe | |
|
|
BLUE M | 0V-490A-2 |
BLUE M 0V-490A-2 OVEN VOLTAGE: 120V / 1PH / 60HZ | TEMP. RANGE: 38C TO 260C / 500F S/N: 0V3-4748
|
🔒 Subscribe |
2015 ENGEL VICTORY 750H/330V/240
PLASTICS PROCESSING EQUIPMENT
2015 ENGEL VICTORY 750H/330V/240 INJECTION MOLDING MACHINE W/ ROTARY TABLE US TONS: 247 | SHOT SIZE ...
Hammer Price:
🔒
2002 HUSKY QD2350 RS200/200
PLASTICS PROCESSING EQUIPMENT
2002 HUSKY QD2350 RS200/200 INJECTION MOLDING MACHINE TONNAGE: 2500 TONS | SHOT SIZE: 1063 OZ | TIEB...
Hammer Price:
🔒
2013 HAITIAN IAPETUS 2-SHOT WITH ROTARY PLATEN
PLASTICS PROCESSING EQUIPMENT
2013 HAITIAN IAPETUS 2-SHOT WITH ROTARY PLATEN INJECTION MOLDING MACHINE - TONNAGE: 405 | SHOT SIZES...
Hammer Price:
🔒
2015 TS/125
PRESSES & FORMING
2015 TS/125 HULL TRANSFER PRESS MAX. CLAMP TONNAGE: 125 TONS | MAX. TRANSFER TONNAGE: 35 TONS | MAX....
Hammer Price:
🔒
CINCINNATI T600
PLASTICS PROCESSING EQUIPMENT
CINCINNATI T600 5 LBS. DUAL-HEAD BLOW MOLDING MACHINE | PLATEN SIZE: 52"X40" | HEAD SIZE: 5 LBS | TY...
Hammer Price:
🔒
TOSHIBA
PLASTICS PROCESSING EQUIPMENT
310 TON 19 OZ. TOSHIBA INJECTION MOLDING MACHINE - CLAMPING FORCE: 310 TONS | SHOT SIZE: 19 OZ. | SC...
Hammer Price:
🔒
2015 HAITIAN/ZHAFIR VE II 900/120-B
PLASTICS PROCESSING EQUIPMENT
2015 HAITIAN/ZHAFIR VE II 900/120-B INJECTION MOLDING MACHINE | 101.2 TON, 1.83 OZ., CLAMPING FORCE:...
Hammer Price:
🔒
2004 KRAUSS MAFFEI 300-1900C2
PLASTICS PROCESSING EQUIPMENT
2004 KRAUSS MAFFEI 300-1900C2 331 TON, 33.6 OZ. W/ "L" BOLT ON INJECTION UNIT AND ROTARY TABLE US TO...
Hammer Price:
🔒
CONAIR 1831
PLASTICS PROCESSING EQUIPMENT
CONAIR 1831 GRANULATOR HP: 40 | THROUGHPUT: 2000 LBS/HR | CUTTING CHAMBER: 18" X 31" | ROTOR: OPEN |...
Hammer Price:
🔒
CONAIR 1831
PLASTICS PROCESSING EQUIPMENT
CONAIR 1831 GRANULATOR HP: 40 | THROUGHPUT: 2000 LBS/HR | CUTTING CHAMBER: 18" X 31" | ROTOR: OPEN |...
Hammer Price:
🔒
MULTITECH HMM-10T
PLASTICS PROCESSING EQUIPMENT
MULTITECH HMM-10T 10 TON INJECTION MOLDING MACHINE TONNAGE: 10 | SHOT SIZE: 0.455 OZ | SCREW DIAMET...
Hammer Price:
🔒
2014
PLASTICS PROCESSING EQUIPMENT
2014 35 TON 1.0 OZ. BOY INJECTION MOLDING MACHINE CLAMPING FORCE: 35 TONS | SHOT SIZE: 1.0 OZ. | SCR...
Hammer Price:
🔒
2015 MULTITECH V85R2-GK-LSR
PLASTICS PROCESSING EQUIPMENT
2015 MULTITECH V85R2-GK-LSR 85 TON MULTITECH(LSR) TYPE: VERTICAL/VERTICAL; 2-STATION LSR | TONNAGE: ...
Hammer Price:
🔒
BATTENFELD BA 350V/50H-R
PLASTICS PROCESSING EQUIPMENT
BATTENFELD BA 350V/50H-R 40 TON VERTICAL INJECTION MOLDING MACHINE, 4-STATION ROTARY, TONNAGE: 40, S...
Hammer Price:
🔒
NELMOR G2030
PLASTICS PROCESSING EQUIPMENT
NELMOR G2030 GRANULATOR HORSE POWER: 50 | NUMBER OF ROTATING KNIVES: 10 | BED KNIVES: 4 | FEED THROA...
Hammer Price:
🔒
GLUCO VS100TPS
PRESSES & FORMING
GLUCO VS100TPS VERTICAL PRESS TONNAGE: 100 | SHOT SIZE: 8 OZ. | TOGGLE STROKE: 12" | ADJUSTABLE DAYL...
Hammer Price:
🔒
MULTITECH SILCOSTAR 923
PLASTICS PROCESSING EQUIPMENT
MULTITECH SILCOSTAR 923 METERING PUMP | VISCOSITY: 1,000,000 MPAS | PROCESSING CAPACITY: 1500G/MIN (...
Hammer Price:
🔒
2017 HILECTRO XTA-1800ID
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
2017 HILECTRO XTA-1800ID ROBOT - HILECTRO XTA-1800ID ROBOT | X-AXIS: 2500 MM | Y-AXIS: 1800 MM | Z-A...
Hammer Price:
🔒
2014 ENGEL IN 200V/40 XS RO
PLASTICS PROCESSING EQUIPMENT
2014 ENGEL IN 200V/40 XS RO 50 TON, 2.2 OZ. VERTICAL RUBBER INJECTION MOLDING MACHINE US TONS: 50 | ...
Hammer Price:
🔒
2000 KRAUSS MAFFEI 110-390 C2
PLASTICS PROCESSING EQUIPMENT
2000 KRAUSS MAFFEI 110-390 C2 INJECTION MOLDING MACHINE TONNAGE: 121 US | SHOT SIZE: 1.7 OZ. | SCREW...
Hammer Price:
🔒
2015 ASIAN PLASTICS SM90TSV
PLASTICS PROCESSING EQUIPMENT
2015 ASIAN PLASTICS SM90TSV INJECTION MOLDING MACHINE: 99 TON, 3.7 OZ., CLAMPING FORCE: 99 TONS | SH...
Hammer Price:
🔒
ENGEL
PLASTICS PROCESSING EQUIPMENT
ENGEL MAGNETIC PLATEN FOR 300 TON TIEBARLESS MAX. CLAMPING FORCE WITH 35.4" X 19.7" MOLD (H X V ): 3...
Hammer Price:
🔒
2004 KRAUSS MAFFEI KM110-520-C2
PLASTICS PROCESSING EQUIPMENT
2004 KRAUSS MAFFEI KM110-520-C2 INJECTION MOLDING MACHINE CLAMPING FORCE: 121 TONS | SHOT SIZE: 8.82...
Hammer Price:
🔒
ENGEL
PLASTICS PROCESSING EQUIPMENT
ENGEL MAGNETIC PLATEN FOR 300 TON TIEBARLESS MAX. CLAMPING FORCE WITH 35.4" X 19.7" MOLD (H X V ): 3...
Hammer Price:
🔒
CONAIR CD200
PACKAGING EQUIPMENT
CONAIR CD200 DRYER - CFM: 150 | DRYING TEMP: 160-375F | ACHIEVABLE DEW POINT: -40F | DESICCANT CARTR...
Hammer Price:
🔒
CUMBERLAND 1620X
PLASTICS PROCESSING EQUIPMENT
CUMBERLAND 1620X GRANULATOR CUTTING CHAMBER: 16"X20" | MOTOR HP: 25 | THROUGHPUT: 900 LBS/HR | ROTOR...
Hammer Price:
🔒
NELMOR
PLASTICS PROCESSING EQUIPMENT
7.5 HP NELMOR GRANULATOR - HP: 7.5 HP | FRONT FEED OPENING: 10" X 12" | ROTOR: OPEN | BLADES: 3 | PH...
Hammer Price:
🔒
1999 BATTENFELD BA1000/315 CDK-SE
PLASTICS PROCESSING EQUIPMENT
1999 BATTENFELD BA1000/315 CDK-SE 110 TON ELECTRIC INJECTION MOLDING MACHINE. TONNAGE: 110 | SHOT SI...
Hammer Price:
🔒
2000 GIDDINGS & LEWIS 8000
CNC MACHINE CENTERS
2000 GIDDINGS & LEWIS 8000 CONTROL: G & L 8000 PENDANT CONTROL | DRIVE: SIEMENS DRIVES |VOLTAGE: 460...
Hammer Price:
🔒
2016 AEC PSA-3.5
REFRIGERATION EQUIPMENT
2016 AEC PSA-3.5 3.5 TON AIR-COOLED CHILLER S/N: 46A0006 | COMPRESSOR: 3.5 HP | TYPE: AIR-COOLED | R...
Hammer Price:
🔒
MICRO PRINT MSS350-MS250
COMMERCIAL PRINTING & BINDERY EQUIPMENT
MICRO PRINT MSS350-MS250 2-STATION PAD PRINTER STATIONS: MSS35 & MS250 | PLATE SIZE CLOSED: 260X250M...
Hammer Price:
🔒
2017 ARI X-650
PLASTICS PROCESSING EQUIPMENT
2017 ARI X-650 SPRUE PICKER | TYPE: SINGLE STAGE | IMM RANGE: 100-180 TONS | VERTICAL STROKE: 650 MM...
Hammer Price:
🔒
CONAIR SEPRO ROBOT PIP 3041
PLASTICS PROCESSING EQUIPMENT
CONAIR SEPRO ROBOT PIP 3041 X-AXIS: APPROX. 3500MM | Y-AXIS: 950MM | Z-AXIS: 2000MM | PAYLOAD: 20 KG...
Hammer Price:
🔒
CONAIR SEPRO PIP 3041
PLASTICS PROCESSING EQUIPMENT
CONAIR SEPRO PIP 3041 ROBOT X-AXIS: 6500 | Y-AXIS: 950 | Z-AXIS: 2000 | PAYLOAD: 20 KG | PRESSURE CI...
Hammer Price:
🔒
PLASTICS PROCESSING EQUIPMENT
3 HP RAPID AUGER GRANULATOR GRANULATOR MOTOR: 3 HP (2.2KW) | CUTTER-HOUSING OPENING: 7.08"X10.23" | ...
Hammer Price:
🔒
PLASTICS PROCESSING EQUIPMENT
3 HP RAPID AUGER GRANULATOR GRANULATOR MOTOR: 3 HP (2.2KW) | CUTTER-HOUSING OPENING: 7.08"X10.23" | ...
Hammer Price:
🔒
2001 GIDDINGS & LEWIS 360P
CNC MACHINE CENTERS
2001 GIDDINGS & LEWIS 360P CNC IN-FEEDING ROTARYTABLE TABLE SIZE X: 72" | TABLE SIZE Y: 72" | CNC CO...
Hammer Price:
🔒
VESTIL HDD-48-7-P
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
VESTIL HDD-48-7-P HYDRAULIC DRUM DUMPER UNIFORM CAPACITY: 750 LBS. | DUMP HEIGHT: 48" | ROTATION HEI...
Hammer Price:
🔒
LOGIC SEAL VT-2600 L
MISC
LOGIC SEAL VT-2600 L LEAK STOPPER MOTOR HP: 1.5 | GPM: 50 | MAX TEMP: 260F | AMPS: 13.2 | HEATERS: 6...
Hammer Price:
🔒
MILACRON CMS 68
PLASTICS PROCESSING EQUIPMENT
MILACRON CMS 68 GRANULATOR HP: 5 | FEED THROAT: 6"X8" | ROTATING BLADES: 2 | BED KNIFE: 1 | VOLTAGE:...
Hammer Price:
🔒
SORGEL
ELECTRICAL AND POWER GENERATION EQUIPMENT
150 KVA SORGEL TRANSFORMER KVA: 150 | HZ: 60 | %IZ: 5.6 | H.V.: 480 H.V. AMPS: 180 | WT: 1020 | CLAS...
Hammer Price:
🔒
CANAM SD200
MISC
CANAM SD200 JUST-IN-TIME DRYERS, FEED THROAT MOUNTED | S/N: 17123 | CAPACITY: 0.8 CU/FT | MAX. TEMPE...
Hammer Price:
🔒
CONAIR SR 4030 A3
PLASTICS PROCESSING EQUIPMENT
CONAIR SR 4030 A3 ROBOT X-AXIS: 2000MM | Y-AXIS: 800MM | Z-AXIS: 1400MM | WRIST ROTATION: 0-90 | PAY...
Hammer Price:
🔒
MOKON HT450910
PLASTICS PROCESSING EQUIPMENT
MOKON HT450910 TEMPERATURE CONTROL UNIT HP: 0.75 | TOTAL KW: 9.2 | MAX TEMP: 250 F | VOLTAGE: 460/3/...
Hammer Price:
🔒
CANAM SD1500
MISC
CANAM SD1500 0.5 CU/FT. JUST-IN-TIME DRYERS, FEED THROAT MOUNTED | S/N: 0416-95 | CAPACITY: 0.5 CU/...
Hammer Price:
🔒
CANAM SD200
MISC
CANAM SD200 JUST-IN-TIME DRYERS, FEED THROAT MOUNTED S/N: 18135 | CAPACITY: 0.8 CU/FT | MAX. TEMPERA...
Hammer Price:
🔒
HUSKY RACK & WIRE
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
5 SECTIONS TEAR DROP STEEL RACKS | 6 - UPRIGHTS 192 X 42 | 20 - BEAMS 2 X 6 | HUSKY RACK & WIRE...
Hammer Price:
🔒
2017 MORETTO TWK9S'S'
PLASTICS PROCESSING EQUIPMENT
2017 MORETTO TWK9S'S' WATER TEMPERATURE COOLER S/N: 1714959 | TEMPERATURE RANGE: 95C | MEDIUM: WATER...
Hammer Price:
🔒
REX ROTH 970661-01/98
MISC
REX ROTH 970661-01/98 HYDRAULIC UNIT HP: 3 | RESERVOIR CAPACITY: 15 GAL | OPERATING PRESSURE SHELL: ...
Hammer Price:
🔒
BLUE M 0V-490A-2
MISC
BLUE M 0V-490A-2 OVEN VOLTAGE: 120V / 1PH / 60HZ | TEMP. RANGE: 38C TO 260C / 500F S/N: 0V3-4748...
Hammer Price:
🔒