Large Surplus Plastic Injection Molding Auction

Williston Asset Management

Category: MATERIAL HANDLING & WAREHOUSE EQUIPMENT

Total Lots: 232

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 51–100 of 232 lots

Year	Make	Model	Lot Description	Hammer Price
1998	SUMITOMO	SH220C-C1250	1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0018, VOLTAGE: 460/3/60, US TONNAGE: 242, SHOT SIZE: 23.8 OZ., SCREW DIA. 63 MM, TIE BAR DISTANCE: 24.02"X22.05", PLATEN SIZE: 35.04"X33.07", OPENING STROKE MIN-MAX: 0"-20.08", MOLD SPACE MIN-MAX: 9.84"-22.83", EJECTOR STROKE: 5.91", INJECTION UNIT: C1250 1998 · SUMITOMO · SH220C-C1250	🔒 Subscribe
			1/4 HP FLAT INCLINE FLAT DROP CONVEYOR, BELT WIDTH: 21IN, BELT LENGTHS: 62IN/15IN/18IN APPROX.	🔒 Subscribe
1998	SUMITOMO	SH100C-C360	1998 SUMITOMO SH100C-C360 INJECTION MOLDING MACHINE, 110 TON, 6.7 OZ. S/N:M0CG0015, VOLTAGE: 460/3/60, US TONNAGE: 110, SHOT SIZE: 6.7, SCREW DIA: 40 MM, TIE BAR DISTANCE: 18.11"X16.14", PLATEN SIZE: 25.98"X24.02", OPENING STROKE MIN-MAX: 0"-13.78", MOLD SPACE MIN-MAX: 7.87"-16.14", EJECTOR STROKE: 3.94", INJECTION UNIT: C360 1998 · SUMITOMO · SH100C-C360	🔒 Subscribe
			MISC ELECTRICAL BOARDS	🔒 Subscribe
	UNA-DYN	HURRICANE MIXER 60-1000	UNA-DYN HURRICANE MIXER MODEL 60-1000 UNA-DYN · HURRICANE MIXER 60-1000	🔒 Subscribe
			16 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 19.5" W X 24" T X 22" STACK	🔒 Subscribe
	UNITED SILICONE	US 10	1 TON UNITED SILICONE US 10 HOT STAMPERS MAX. STAMPING FORCE: 1 TONS \| STANDARD HEAD SIZES: 6" X 8" \| THROAT DEPTH: 8" \| APPROXIMATE DIMENSIONS(HXWXD): 44" X 40" X 30" \| ELECTRICAL REQUIREMENTS: 110/220 \| AIR REQUIREMENTS: 3 CFM S/N: 1C 7490499 HW UNITED SILICONE · US 10	🔒 Subscribe
	CUMBERLAND	GANULATOR	20 HP CUMBERLAND GANULATOR CUMBERLAND · GANULATOR	🔒 Subscribe
1998	SUMITOMO	SH220C-C1250	1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0020, VOLTAGE: 460/3/60, US TONNAGE: 242, SHOT SIZE: 23.8 OZ., SCREW DIA. 63 MM, TIE BAR DISTANCE: 24.02"X22.05", PLATEN SIZE: 35.04"X33.07", OPENING STROKE MIN-MAX: 0"-20.08", MOLD SPACE MIN-MAX: 9.84"-22.83", EJECTOR STROKE: 5.91", INJECTION UNIT: C1250 1998 · SUMITOMO · SH220C-C1250	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE BROCK	🔒 Subscribe
			12 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 16.5" W X 24" T X 18.5" STACK	🔒 Subscribe
			87 OZ. LARGE TUB MOLD, 2 CAVITY, HOT RUNNER MOLD, 18" W X 28" T X 24" STACK	🔒 Subscribe
			PALLET OF MOLD CLAMPS	🔒 Subscribe
1998	SUMITOMO	SH160C-C560	1998 SUMITOMO SH160C-C560 INJECTION MOLDING MACHINE, 176 TON, 10.5 OZ. S/N: M0CL0045 VOLTAGE: 460/3/60, US TONNAGE: 176, SHOT SIZE: 10.5 OZ., SCREW DIA. 50 MM, TIE BAR DISTANCE: 22.05"X20.08", PLATEN SIZE: 31.5"X29.53", OPENING STROKE MIN-MAX: 0"-16.93", MOLD SPACE MIN-MAX: 7.87"-19.69", EJECTOR STROKE: 4.72", INJECTION UNIT: C560 1998 · SUMITOMO · SH160C-C560	🔒 Subscribe
	SUMITOMO		SUMITOMO PRINTED CIRCUIT BOARD SUMITOMO	🔒 Subscribe
			16 OZ. FLUTED CUP, 4 CAVITY, HOT RUNNER MOLD, 20.5" W X 22.5" T X 19.5" STACK - 16 OZ. FLUTED CUP, 4 CAVITY, HOT RUNNER MOLD, 20.5 W X 22.5 T X 19.5 STACK	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE BROCK	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE BROCK	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 64IN X 23IN	🔒 Subscribe
	SUMITOMO		SUMITOMO REPAIRED PUMP SUMITOMO	🔒 Subscribe
			32 OZ. TUMBLER/CUP, 2 CAVITY, HOT RUNNER MOLD 16" W X 22" T X 24" STACK	🔒 Subscribe
			32 OZ. STADIUM CUP, 2 CAVITY, HOT RUNNER MOLD, 12" W X 21.5" T X 19" STACK	🔒 Subscribe
	SUMITOMO		SUMITOMO VALVES SUMITOMO	🔒 Subscribe
	ALLSOURCE	41800	ALLSOURCE 41800 ABRASIVE SAND BLASTING CABINET \| FEED TYPE: SIPHON \| WORK AREA DIMENSIONS: 35" X 44 IN X 34" \| WORK AREA HEIGHT: 35" \| WORK AREA WIDTH: 44" \| WORK AREA DEPTH: 34" \| OVERALL DIMENSIONS: 70" X 52" X 47" \| OVERALL HEIGHT: 70" \| OVERALL WIDTH: 52" \| OVERALL DEPTH: 47" \| TOP OPENING: 29" X 38" \| WINDOW: 30" X 15" \| MIN. CFM @ 80 PSI: 15 CFM \| SIDE OPENING: NO SIDE OPENING \| CABINET MATERIAL: STEEL \| FEATURES: 400 LB CAPACITY, SINGLE OPERATOR \| APPLICATION: ABRASIVE BLASTING \| VOLTAGE: 120V,60HZ,1210W \| MAX. RATED AIR PRESSURE: 125 PSI ALLSOURCE · 41800	🔒 Subscribe
1992	SUMITOMO	SG350S-MIV	1992 SUMITOMO SG350S-MIV INJECTION MOLDING MACHINE WITH ACCUMULATOR - 385 TON, 18.8 OZ. SHOT SIZE, SCREW DIA: 56MM, TIE BAR DISTANCE: 27.95"X27.95", PLATEN SIZE: 40.55"X40.55", OPENING STROKE MIN-MAX: 10.24"-24.02", MOLD SPACE MIN-MAX: 11.81"-25.59", EJECTOR STROKE: 6.89", INJECTION UNIT: C1700, VOLTAGE: 460/3/60, US TONNAGE: 385, INCLUDES ACCUMULATOR FOR HIGH-SPEED S/N: M0HN0157 1992 · SUMITOMO · SG350S-MIV	🔒 Subscribe
	CREST	4HT-2426-30	CREST 4HT-2426-30 ULTRASONIC CLEANER S/N: 0998-T-0932 \| FLUID CAPACITY: 49 GAL. \| ULTRASONIC POWER: 2500 WATTS \| INTERNAL DIMENSIONS(WXLXD): 24 X26X20 \| OVERALL DIMENSIONS (WXLXD): 27X29X24 \| BASKET DIMENSIONS(WXLXD): 21X24X6 \| VOLTAGE: 240V/21A/5000W CREST · 4HT-2426-30	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, 1/2 HP, BELT SIZE APPROX. 12IN X 66 IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 10IN X 80IN	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR AUTOLOAD PNEUMATIC VENTURI LOADER	🔒 Subscribe
1988	ARBURG	221-75-350	1988 ARBURG 221-75-350 35 TON INJECTION MOLDING MACHINE S/N: 140514 1988 · ARBURG · 221-75-350	🔒 Subscribe
1988	ARBURG	305-210-700	1988 ARBURG 305-210-700 70 TON INJECTION MOLDING MACHINE S/N: 139616 1988 · ARBURG · 305-210-700	🔒 Subscribe
1982	ARBURG	270-90-350	1982 ARBURG 270-90-350 35 TON INJECTION MOLDING MACHINE S/N: 121447 1982 · ARBURG · 270-90-350	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 12IN X 67 IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 15IN X 70IN	🔒 Subscribe
		5 ZONE, 5 CARD DME HOT RUNNER CONTROL	5 ZONE, 5 CARD DME HOT RUNNER CONTROL 5 ZONE, 5 CARD DME HOT RUNNER CONTROL	🔒 Subscribe
	IMS	104259-8	8 ZONE, 5 CARD IMS HOT RUNNER CONTROL & CABLES, MODEL: 104259-8 IMS · 104259-8	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR AUTOLOAD PNEUMATIC VENTURI LOADER	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR AUTOLOAD PNEUMATIC VENTURI LOADER	🔒 Subscribe
2005	ADVANTAGE	SK-1035VE-41V1	2005 ADVANTAGE SK-1035VE-41V1 TEMPERATURE CONTROL UNIT \| HP: 3/4 \| HEATER: 10 KW \| GPM: 35 \| PSI: 30 \| VOLTAGE: 460/3/60 \| FLA: 13.53 \| S/N: 91682 2005 · ADVANTAGE · SK-1035VE-41V1	🔒 Subscribe
2012	TEMPTEK	VT-2200-LS	2012 TEMPTEK VT-2200-LS TEMPERATURE CONTROL UNIT 2 HP, HEATER: 10 KW, GPM: 75, PSI: 30, VOLTAGE: 460/3/60, FLA: 15 S/N: 125226 2012 · TEMPTEK · VT-2200-LS	🔒 Subscribe
2008	EASTEY	ET3612	2008 EASTEY ET3612 HEAT SHRINK TUNNEL MACHINE DIMENSIONS: 49" W X 74" L \| CHAMBER DIMENSIONS: 36" W X 52" L \| CONVEYOR WIDTH: 36" \| CONVEYOR LENGTH: 72" \| POWER REQUIREMENTS: 220V, 50-60 AMPS, 3 PHASE \| MACHINE WEIGHT: 1300 LBS. \| VOLTAGE: 220/3 \| BELT TYPE: PLASTIC BELT S/N: 4553612TLMB 2008 · EASTEY · ET3612	🔒 Subscribe
2005	TEMPTEK	VT-275-LS	2005 TEMPTEK VT-275-LS TEMPERATURE CONTROL UNIT S/N: 91796 \| HP: 3/4 \| HEATER: 10 KW \| GPM: 35 \| PSI: 30 \| VOLTAGE: 460/3/60 \| FLA: 13.53 2005 · TEMPTEK · VT-275-LS	🔒 Subscribe
			2 TON GANTRY CRANE & HOIST	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
	AEC	AL-071G	AEC AL-071G AUTOLOADER WITH GAYLOR HEIGHT STAND, S/N: 92B0793, 115V AEC · AL-071G	🔒 Subscribe

Year	Make	Model	Description	Price
1998	SUMITOMO	SH220C-C1250	1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0018, VOLTAGE: 460/3/60, US TONNAGE: 242, SHOT SIZE: 23.8 OZ., SCREW DIA. 63 MM, TIE BAR DISTANCE: 24.02"X22.05", PLATEN SIZE: 35.04"X33.07", OPENING STROKE MIN-MAX: 0"-20.08", MOLD SPACE MIN-MAX: 9.84"-22.83", EJECTOR STROKE: 5.91", INJECTION UNIT: C1250	🔒 Subscribe
			1/4 HP FLAT INCLINE FLAT DROP CONVEYOR, BELT WIDTH: 21IN, BELT LENGTHS: 62IN/15IN/18IN APPROX.	🔒 Subscribe
1998	SUMITOMO	SH100C-C360	1998 SUMITOMO SH100C-C360 INJECTION MOLDING MACHINE, 110 TON, 6.7 OZ. S/N:M0CG0015, VOLTAGE: 460/3/60, US TONNAGE: 110, SHOT SIZE: 6.7, SCREW DIA: 40 MM, TIE BAR DISTANCE: 18.11"X16.14", PLATEN SIZE: 25.98"X24.02", OPENING STROKE MIN-MAX: 0"-13.78", MOLD SPACE MIN-MAX: 7.87"-16.14", EJECTOR STROKE: 3.94", INJECTION UNIT: C360	🔒 Subscribe
			MISC ELECTRICAL BOARDS	🔒 Subscribe
	UNA-DYN	HURRICANE MIXER 60-1000	UNA-DYN HURRICANE MIXER MODEL 60-1000	🔒 Subscribe
			16 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 19.5" W X 24" T X 22" STACK	🔒 Subscribe
	UNITED SILICONE	US 10	1 TON UNITED SILICONE US 10 HOT STAMPERS MAX. STAMPING FORCE: 1 TONS \| STANDARD HEAD SIZES: 6" X 8" \| THROAT DEPTH: 8" \| APPROXIMATE DIMENSIONS(HXWXD): 44" X 40" X 30" \| ELECTRICAL REQUIREMENTS: 110/220 \| AIR REQUIREMENTS: 3 CFM S/N: 1C 7490499 HW	🔒 Subscribe
	CUMBERLAND	GANULATOR	20 HP CUMBERLAND GANULATOR	🔒 Subscribe
1998	SUMITOMO	SH220C-C1250	1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0020, VOLTAGE: 460/3/60, US TONNAGE: 242, SHOT SIZE: 23.8 OZ., SCREW DIA. 63 MM, TIE BAR DISTANCE: 24.02"X22.05", PLATEN SIZE: 35.04"X33.07", OPENING STROKE MIN-MAX: 0"-20.08", MOLD SPACE MIN-MAX: 9.84"-22.83", EJECTOR STROKE: 5.91", INJECTION UNIT: C1250	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE	🔒 Subscribe
			12 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 16.5" W X 24" T X 18.5" STACK	🔒 Subscribe
			87 OZ. LARGE TUB MOLD, 2 CAVITY, HOT RUNNER MOLD, 18" W X 28" T X 24" STACK	🔒 Subscribe
			PALLET OF MOLD CLAMPS	🔒 Subscribe
1998	SUMITOMO	SH160C-C560	1998 SUMITOMO SH160C-C560 INJECTION MOLDING MACHINE, 176 TON, 10.5 OZ. S/N: M0CL0045 VOLTAGE: 460/3/60, US TONNAGE: 176, SHOT SIZE: 10.5 OZ., SCREW DIA. 50 MM, TIE BAR DISTANCE: 22.05"X20.08", PLATEN SIZE: 31.5"X29.53", OPENING STROKE MIN-MAX: 0"-16.93", MOLD SPACE MIN-MAX: 7.87"-19.69", EJECTOR STROKE: 4.72", INJECTION UNIT: C560	🔒 Subscribe
	SUMITOMO		SUMITOMO PRINTED CIRCUIT BOARD	🔒 Subscribe
			16 OZ. FLUTED CUP, 4 CAVITY, HOT RUNNER MOLD, 20.5" W X 22.5" T X 19.5" STACK - 16 OZ. FLUTED CUP, 4 CAVITY, HOT RUNNER MOLD, 20.5 W X 22.5 T X 19.5 STACK	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE	🔒 Subscribe
	BROCK		BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12' DIA (HEIGHT 30'2"/WEIGHT 4,698 LBS) 30 DEGREE ROOF, 45 DEGREE HOPPER BOTTOM, CONSTRUCTED OF FDA APPROVED HEAVY-DUTY GALVANIZED HIGH CARBON STEEL, BOLTED CONSTRUCTION, USING 2.66" CORRUGATION, FDA POLYETHYLENE SEALANT, LADDER, SAFETY CAGE, ANCHOR BOLTS, MANUAL SLIDE GATE, 22" ROOF OPENING WITH DOUBLE LATCH, 12" DISCHARGE OPENING WITH 16"X16" FLANGE	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 64IN X 23IN	🔒 Subscribe
	SUMITOMO		SUMITOMO REPAIRED PUMP	🔒 Subscribe
			32 OZ. TUMBLER/CUP, 2 CAVITY, HOT RUNNER MOLD 16" W X 22" T X 24" STACK	🔒 Subscribe
			32 OZ. STADIUM CUP, 2 CAVITY, HOT RUNNER MOLD, 12" W X 21.5" T X 19" STACK	🔒 Subscribe
	SUMITOMO		SUMITOMO VALVES	🔒 Subscribe
	ALLSOURCE	41800	ALLSOURCE 41800 ABRASIVE SAND BLASTING CABINET \| FEED TYPE: SIPHON \| WORK AREA DIMENSIONS: 35" X 44 IN X 34" \| WORK AREA HEIGHT: 35" \| WORK AREA WIDTH: 44" \| WORK AREA DEPTH: 34" \| OVERALL DIMENSIONS: 70" X 52" X 47" \| OVERALL HEIGHT: 70" \| OVERALL WIDTH: 52" \| OVERALL DEPTH: 47" \| TOP OPENING: 29" X 38" \| WINDOW: 30" X 15" \| MIN. CFM @ 80 PSI: 15 CFM \| SIDE OPENING: NO SIDE OPENING \| CABINET MATERIAL: STEEL \| FEATURES: 400 LB CAPACITY, SINGLE OPERATOR \| APPLICATION: ABRASIVE BLASTING \| VOLTAGE: 120V,60HZ,1210W \| MAX. RATED AIR PRESSURE: 125 PSI	🔒 Subscribe
1992	SUMITOMO	SG350S-MIV	1992 SUMITOMO SG350S-MIV INJECTION MOLDING MACHINE WITH ACCUMULATOR - 385 TON, 18.8 OZ. SHOT SIZE, SCREW DIA: 56MM, TIE BAR DISTANCE: 27.95"X27.95", PLATEN SIZE: 40.55"X40.55", OPENING STROKE MIN-MAX: 10.24"-24.02", MOLD SPACE MIN-MAX: 11.81"-25.59", EJECTOR STROKE: 6.89", INJECTION UNIT: C1700, VOLTAGE: 460/3/60, US TONNAGE: 385, INCLUDES ACCUMULATOR FOR HIGH-SPEED S/N: M0HN0157	🔒 Subscribe
	CREST	4HT-2426-30	CREST 4HT-2426-30 ULTRASONIC CLEANER S/N: 0998-T-0932 \| FLUID CAPACITY: 49 GAL. \| ULTRASONIC POWER: 2500 WATTS \| INTERNAL DIMENSIONS(WXLXD): 24 X26X20 \| OVERALL DIMENSIONS (WXLXD): 27X29X24 \| BASKET DIMENSIONS(WXLXD): 21X24X6 \| VOLTAGE: 240V/21A/5000W	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN	🔒 Subscribe
			1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, 1/2 HP, BELT SIZE APPROX. 12IN X 66 IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 10IN X 80IN	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
1988	ARBURG	221-75-350	1988 ARBURG 221-75-350 35 TON INJECTION MOLDING MACHINE S/N: 140514	🔒 Subscribe
1988	ARBURG	305-210-700	1988 ARBURG 305-210-700 70 TON INJECTION MOLDING MACHINE S/N: 139616	🔒 Subscribe
1982	ARBURG	270-90-350	1982 ARBURG 270-90-350 35 TON INJECTION MOLDING MACHINE S/N: 121447	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 12IN X 67 IN	🔒 Subscribe
			INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 15IN X 70IN	🔒 Subscribe
		5 ZONE, 5 CARD DME HOT RUNNER CONTROL	5 ZONE, 5 CARD DME HOT RUNNER CONTROL	🔒 Subscribe
	IMS	104259-8	8 ZONE, 5 CARD IMS HOT RUNNER CONTROL & CABLES, MODEL: 104259-8	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
		AUTOLOAD PNEUMATIC VENTURI LOADER	AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
2005	ADVANTAGE	SK-1035VE-41V1	2005 ADVANTAGE SK-1035VE-41V1 TEMPERATURE CONTROL UNIT \| HP: 3/4 \| HEATER: 10 KW \| GPM: 35 \| PSI: 30 \| VOLTAGE: 460/3/60 \| FLA: 13.53 \| S/N: 91682	🔒 Subscribe
2012	TEMPTEK	VT-2200-LS	2012 TEMPTEK VT-2200-LS TEMPERATURE CONTROL UNIT 2 HP, HEATER: 10 KW, GPM: 75, PSI: 30, VOLTAGE: 460/3/60, FLA: 15 S/N: 125226	🔒 Subscribe
2008	EASTEY	ET3612	2008 EASTEY ET3612 HEAT SHRINK TUNNEL MACHINE DIMENSIONS: 49" W X 74" L \| CHAMBER DIMENSIONS: 36" W X 52" L \| CONVEYOR WIDTH: 36" \| CONVEYOR LENGTH: 72" \| POWER REQUIREMENTS: 220V, 50-60 AMPS, 3 PHASE \| MACHINE WEIGHT: 1300 LBS. \| VOLTAGE: 220/3 \| BELT TYPE: PLASTIC BELT S/N: 4553612TLMB	🔒 Subscribe
2005	TEMPTEK	VT-275-LS	2005 TEMPTEK VT-275-LS TEMPERATURE CONTROL UNIT S/N: 91796 \| HP: 3/4 \| HEATER: 10 KW \| GPM: 35 \| PSI: 30 \| VOLTAGE: 460/3/60 \| FLA: 13.53	🔒 Subscribe
			2 TON GANTRY CRANE & HOIST	🔒 Subscribe
			AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR	🔒 Subscribe
	AEC	AL-071G	AEC AL-071G AUTOLOADER WITH GAYLOR HEIGHT STAND, S/N: 92B0793, 115V	🔒 Subscribe

1998 SUMITOMO SH220C-C1250

PLASTICS PROCESSING EQUIPMENT

1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0018, VOLTAGE: 460/...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1/4 HP FLAT INCLINE FLAT DROP CONVEYOR, BELT WIDTH: 21IN, BELT LENGTHS: 62IN/15IN/18IN APPROX....

Hammer Price: 🔒

1998 SUMITOMO SH100C-C360

PLASTICS PROCESSING EQUIPMENT

1998 SUMITOMO SH100C-C360 INJECTION MOLDING MACHINE, 110 TON, 6.7 OZ. S/N:M0CG0015, VOLTAGE: 460/3/6...

Hammer Price: 🔒

MISC

MISC ELECTRICAL BOARDS...

Hammer Price: 🔒

UNA-DYN HURRICANE MIXER 60-1000

FOOD PROCESSING AND RESTAURANT EQUIPMENT

UNA-DYN HURRICANE MIXER MODEL 60-1000...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

16 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 19.5" W X 24" T X 22" STACK...

Hammer Price: 🔒

UNITED SILICONE US 10

PRESSES & FORMING

1 TON UNITED SILICONE US 10 HOT STAMPERS MAX. STAMPING FORCE: 1 TONS | STANDARD HEAD SIZES: 6" X 8" ...

Hammer Price: 🔒

CUMBERLAND GANULATOR

MISC

20 HP CUMBERLAND GANULATOR...

Hammer Price: 🔒

1998 SUMITOMO SH220C-C1250

PLASTICS PROCESSING EQUIPMENT

1998 SUMITOMO SH220C-C1250 INJECTION MOLDING MACHINE, 242 TON, 23.8 OZ. S/N: M0CM0020, VOLTAGE: 460/...

Hammer Price: 🔒

BROCK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

12 OZ. DRINKING CUP, 4 CAVITY, HOT RUNNER MOLD, 16.5" W X 24" T X 18.5" STACK...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

87 OZ. LARGE TUB MOLD, 2 CAVITY, HOT RUNNER MOLD, 18" W X 28" T X 24" STACK...

Hammer Price: 🔒

MISC

PALLET OF MOLD CLAMPS...

Hammer Price: 🔒

1998 SUMITOMO SH160C-C560

PLASTICS PROCESSING EQUIPMENT

1998 SUMITOMO SH160C-C560 INJECTION MOLDING MACHINE, 176 TON, 10.5 OZ. S/N: M0CL0045 VOLTAGE: 460/3/...

Hammer Price: 🔒

SUMITOMO

CIRCUIT BOARD, SMT & SEMICONDUCTOR MANUFACTURING EQUIPMENT

SUMITOMO PRINTED CIRCUIT BOARD...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

16 OZ. FLUTED CUP, 4 CAVITY, HOT RUNNER MOLD, 20.5" W X 22.5" T X 19.5" STACK - 16 OZ. FLUTED CUP, 4...

Hammer Price: 🔒

BROCK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12...

Hammer Price: 🔒

BROCK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BROCK 89,614 LBS. CAPACITY MATERIAL SILO - CAPACITY: 2,422 CF, 89,614 LBS CAPACITY (AT 37 LB/CF), 12...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 64IN X 23IN...

Hammer Price: 🔒

SUMITOMO

TANKS, PUMPS & STORAGE EQUIPMENT

SUMITOMO REPAIRED PUMP...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

32 OZ. TUMBLER/CUP, 2 CAVITY, HOT RUNNER MOLD 16" W X 22" T X 24" STACK...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

32 OZ. STADIUM CUP, 2 CAVITY, HOT RUNNER MOLD, 12" W X 21.5" T X 19" STACK...

Hammer Price: 🔒

SUMITOMO

MISC

SUMITOMO VALVES...

Hammer Price: 🔒

ALLSOURCE 41800

SURFACE FINISHING EQUIPMENT

ALLSOURCE 41800 ABRASIVE SAND BLASTING CABINET | FEED TYPE: SIPHON | WORK AREA DIMENSIONS: 35" X 44 ...

Hammer Price: 🔒

1992 SUMITOMO SG350S-MIV

PLASTICS PROCESSING EQUIPMENT

1992 SUMITOMO SG350S-MIV INJECTION MOLDING MACHINE WITH ACCUMULATOR - 385 TON, 18.8 OZ. SHOT SIZE, S...

Hammer Price: 🔒

CREST 4HT-2426-30

SURFACE FINISHING EQUIPMENT

CREST 4HT-2426-30 ULTRASONIC CLEANER S/N: 0998-T-0932 | FLUID CAPACITY: 49 GAL. | ULTRASONIC POWER:...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1/4 HP PART DROP CONVEYOR, BELT SIZE (LXW) APPROX. 49IN X 23IN...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INCLINE CLEATED CONVEYOR, 1/2 HP, BELT SIZE APPROX. 12IN X 66 IN...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 10IN X 80IN...

Hammer Price: 🔒

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

AUTOLOAD PNEUMATIC VENTURI LOADER

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

1988 ARBURG 221-75-350

PLASTICS PROCESSING EQUIPMENT

1988 ARBURG 221-75-350 35 TON INJECTION MOLDING MACHINE S/N: 140514...

Hammer Price: 🔒

1988 ARBURG 305-210-700

PLASTICS PROCESSING EQUIPMENT

1988 ARBURG 305-210-700 70 TON INJECTION MOLDING MACHINE S/N: 139616...

Hammer Price: 🔒

1982 ARBURG 270-90-350

PLASTICS PROCESSING EQUIPMENT

1982 ARBURG 270-90-350 35 TON INJECTION MOLDING MACHINE S/N: 121447...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 12IN X 67 IN...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INCLINE CLEATED CONVEYOR, BELT SIZE APPROX. 15IN X 70IN...

Hammer Price: 🔒

5 ZONE, 5 CARD DME HOT RUNNER CONTROL

PLASTICS PROCESSING EQUIPMENT

5 ZONE, 5 CARD DME HOT RUNNER CONTROL...

Hammer Price: 🔒

IMS 104259-8

PLASTICS PROCESSING EQUIPMENT

8 ZONE, 5 CARD IMS HOT RUNNER CONTROL & CABLES, MODEL: 104259-8...

Hammer Price: 🔒

AUTOLOAD PNEUMATIC VENTURI LOADER

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

AUTOLOAD PNEUMATIC VENTURI LOADER

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

2005 ADVANTAGE SK-1035VE-41V1

MISC

2005 ADVANTAGE SK-1035VE-41V1 TEMPERATURE CONTROL UNIT | HP: 3/4 | HEATER: 10 KW | GPM: 35 | PSI: 30...

Hammer Price: 🔒

2012 TEMPTEK VT-2200-LS

MISC

2012 TEMPTEK VT-2200-LS TEMPERATURE CONTROL UNIT 2 HP, HEATER: 10 KW, GPM: 75, PSI: 30, VOLTAGE: 460...

Hammer Price: 🔒

2008 EASTEY ET3612

PACKAGING EQUIPMENT

2008 EASTEY ET3612 HEAT SHRINK TUNNEL MACHINE DIMENSIONS: 49" W X 74" L | CHAMBER DIMENSIONS: 36" W ...

Hammer Price: 🔒

2005 TEMPTEK VT-275-LS

MISC

2005 TEMPTEK VT-275-LS TEMPERATURE CONTROL UNIT S/N: 91796 | HP: 3/4 | HEATER: 10 KW | GPM: 35 | PSI...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2 TON GANTRY CRANE & HOIST...

Hammer Price: 🔒

MISC

AUTOLOAD PNEUMATIC VENTURI LOADER WITH SENSOR...

Hammer Price: 🔒

AEC AL-071G

MISC

AEC AL-071G AUTOLOADER WITH GAYLOR HEIGHT STAND, S/N: 92B0793, 115V...

Hammer Price: 🔒

<< Previous 1 2 3 4 5 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Large Surplus Plastic Injection Molding Auction

Save to Project Folder

Print Options

Save to Project Folder