CNCs Lathes Fabrication FoundryMaterials Handling Equipment More Collective Auction

TECHSERV ACUCUT WATER JET CUTTING MACHINE

BINNS & BERRY TRIDENT L1000 HEAVY DUTY LATHE LATHE, D.R.O INCLUDED, 36 CHUCK DIAMETER, 96 BETWEEN CENTRES, 60 SWING IN GAP, 40 SWING OVER BED, CW 3-POINT STEADY. FOOTPRINT: 5M LONG X 1.5M WIDE. PLEASE NOTE THAT THERE ARE TWO THREE-POINT STEADIES WITH THIS MACHINE. SEE IMAGES. TOOLING WILL BE REMOVED AT THE POINT OF SALE.

DEAN SMITH & GRACE TYPE 18 CENTRE LATHE, 18 CHUCK, 144 BETWEEN CENTRES, 24 SWING IN GAP, 12 SWING OVER CROSS SLIDE, CW 3 POINT STEADY. FOOTPRINT: 6M LONG X 1.4M WIDE

1996 FILTEX FX1125 TYPE F DUST EXTRACTOR S/N: 7925 CONTAINS NEW FILTER BAGS SHAKER CONTROL UNIT NEEDS ATTENTION DUDLEY

VIXEN VM55 PRESSURE FED BLAST CABINET. CW SEPARATE DUST EXTRACTOR, CYCLONE AND PRESSURE POT. INSIDE THE BLAST CHAMBER IS A MANUALLY OPERATED TURNTABLE THAT IS FIXED ON A LOADING BOGEY FOR EASE OF GETTING ALL SURFACES BLASTED AND THE LOADING / UNLOADING OF PARTS. INSIDE CHAMBER MEASUREMENTS: 54 INCHES LONG X 24 INCHES WIDE. TURNTABLE DIAMETER 700MM. SIDE OPENING DOOR (IF REQUIRED): 33 INCHES HIGH X 30 INCHES WIDE. NEW GLOVES NEEDED.

2007 ALPHEUS POWER PT DRY ICE BLAST MACHINE CW AIR HOSE & GUN M/C NO - 74236C128 S/N: 13832/001D. THIS USED DRY ICE BLAST MACHINE WAS FOR REMOVING GRAPHITE/LUBRICANT COATINGS FROM DIES BIRMINGHAM.

1985 MCM PROGRESS 1 TWIN PALLET HORIZONTAL MACHINING CENTER M/C NO - 204 380V/50HZ/15KW TWIN PALLETS 700 DIA X-AXIS: 1700MM Y-AXIS: 800MM Z-AXIS: 700MM TABLE LOAD: 10 TONNES PALLET ROTATION LOAD: 1.5 TONNES PALLET POSITIONING ONLY EVERY 1 DEG. BORING DIAMETER FROM 6MM TO 400MM.

SAND MIXER/MULLER. - UNKNOWN OEM SAND MIXER / MULLER.

2001 FILTEX FX750 TYPE F DUST EXTRACTOR - FULLY AUTOMATIC S/N: 9396

QUALTERS & SMITH DUDLEY RADIAL ARM DRILL

OMEGA SAND MIXER CW PANEL & OVERHEAD SAND STORAGE HOPPER AND SUPPORTING STEELWORK. BUYER TO DISMANTLE. RAMS REQUIRED - TO BE AGREED WITH OUR CLIENT DUDLEY

ENDOTHERMIC GAS GENERATOR - 850 CU FT PER HOUR. UNKNOWN OEM. CLIENT COMMENT 'HAS RUN IN THE LAST 12 MONTHS'. NOTE - SOME INSTRUMENTATION IS MISSING AND WILL THEREFORE NEED TO BE REPLACED. CLIENT COMMENT: 'THE MISSING INSTRUMENTS FROM THE GENERATORS WERE FOR THE ATMOSPHERE CONTROL BUT POTENTIAL BUYERS MAY HAVE THEIR OWN METHOD FOR CONTROLLING THE ATMOSPHERE'. IT WILL BE THE RESPONSIBILITY OF THE BUYER TO ASCERTAIN COMPLETENESS / APPROPRIATENESS OF THESE MACHINES.

BRITISH FURNACES ENDOTHERMIC GAS GENERATOR, 2000 CU FT PER HOUR. USED IN A HEAT TREATMENT FACILITY FOR CONTROLLING ATMOSPHERES FOR PROCESSES SUCH AS HARDENING,ANNEALING,STRESS RELIEVING,CARBURISING. SOME OF THE CONTROL INSTRUMENTATION IS MISSING AND THEREFORE WILL NEED REPLACING. SUBSEQUENTLY REFURBISHED BY HEAT TREAT SERVICES LIMITED: 2000 CU FT PER HOUR. CLIENT COMMENT - HAS RUN IN THE LAST 12 MONTHS'. CLIENT COMMENT: 'THE MISSING INSTRUMENTS FROM THE GENERATORS WERE FOR THE ATMOSPHERE CONTROL BUT POTENTIAL BUYERS MAY HAVE THEIR OWN METHOD FOR CONTROLLING THE ATMOSPHERE'. IT WILL BE THE RESPONSIBILITY OF THE BUYER TO ASCERTAIN COMPLETENESS / APPROPRIATENESS OF THESE MACHINES.

K.F ALLIANCE ENGINEERING LTD. MATERIALS HANDLING LINEAR VIBRATORY PARTS FEEDING SYSTEM (GREEN) SKID MOUNTED (GREEN) LINEAR VIBRATORY PARTS FEEDING SYSTEM. USED IN OUR CLIENTS SUB CONTRACT HEAT TREATMENT FACILITY TO LOAD FURNACES BUT COULD BE USED FOR OTHER APPLICATIONS WHERE THE BULK LOADING OF SMALL PARTS IN VOLUME ARE REQUIRED. VENDOR COMMENT 'DOESNT HAVE A WEIGH HEAD AS SUCH BUT WORKS ON A COUNTERBALANCE SYSTEM'. THIS ITEM HAS BEEN DECOMMISSIONED. APPROX FOOTPRINT: 3.8M HIGH X 2.8M DEEP X 2.3M WIDE. MAIN FEED TROUGH 2.2M LONG X 750MM WIDE X 315MM DEEP SKID MOUNTED FOR EASE OF REINSTALLATION AND PORTABILITY

LINEAR VIBRATORY PARTS FEEDING SYSTEM (BLUE) MATERIALS HANDLING LINEAR VIBRATORY PARTS FEEDING SYSTEM. USED IN OUR CLIENTS SUB CONTRACT HEAT TREATMENT FACILITY TO LOAD FURNACES BUT COULD BE USED FOR OTHER APPLICATIONS WHERE THE BULK LOADING OF SMALL PARTS IN VOLUME ARE REQUIRED. (BLUE) LINEAR VIBRATORY PARTS FEEDING SYSTEM BY K.F ALLIANCE ENGINEERING LTD. THIS ITEM HAS BEEN DECOMMISSIONED. APPROX FOOTPRINT: 4.5M HIGH X 4M DEEP X 1.5M WIDE

ACETARC WORKHORSE NO2 GEARED POURING LADLE 500KG CAPACITY SWL - 972KG S/N: 4801/15

ACETARC WORKHORSE NO2 GEARED POURING LADLE 500KG CAPACITY SWL - 972KG S/N: 4802/15

2001 TILGHMAN WHEELABRATOR TWIN BLAST WHEEL CONTINUOUS SHOT BLASTER CW DUST FILTER. TWIN BLAST WHEEL TILGHMAN WHEELABRATOR 1000MM WIDE RUBBER BELT CONTINUOUS GRIT/SHOT BLASTING MACHINE CW FILTEX DUST EXTRACTOR TYPE -REF FX 6690, TYPE H FULLY AUTOMATIC S/N: 9396 MAX HEIGHT OF PRODUCT THAT CAN BE PROCESSED: 13 INCHES / 330 MM TO THE EXISTING CUT OU FLAP FLOOR DIMENSIONS (EX FILTER) - 3.70M WIDE X 6.4M DEEP X 5.10M HIGH FILTER - 1.22M WIDE X 2.15M DEEP X 3.27M HIGH THIS MACHINE IS CURRENTLY SITED IN A PIT CLIENT ADVISES THAT A NEW BELT HAS ONLY RECENTLY BEEN FITTED WE HAVE BEEN UNABLE TO VERIFY THE RUN HOURS AS BEING TRUE. ACCEPTANCE OF RAMS BY OUR CLIENT WILL BE A REQUIREMENT IN RESPECT OF THE DISMANTLING AND REMOVAL OF THIS ITEM.

ROTARY DEGASSING MACHINE (PORTABLE) OEM - SINE ASSOCIATES THERE IS NO STIRRER WITH THIS USED ROTARY DEGASSER. USED BY OUR CLIENT FOR THE ROTARY DEGASSING OF ALUMINIUM AND ITS ALLOYS

ROTARY DEGASSING MACHINE (PORTABLE) USED BY OUR CLIENT FOR THE DEGASSING OF ALUMINIUM AND ITS ALLOYS IN THEIR DIECASTING FACILITY CW STIRRING SHAFT MANUAL WINCH OPERATION.

2008 ROBOPRESS C20 16 TONNE C FRAME HYDRAULIC PRESS CW UNI OP HMI CONTROL S/N: 745

PANASONIC PERFORMARC ROBOTIC WELDING CELL

HYDRAULIC HONING MACHINE (UNKNOWN OEM) - HYDRAULIC TUBE HONER (UNKNOWN OEM). MAX BORE SIZE OF TUBE IT WILL HONE: 200MM, MAX LENGTH OF TUBE: 3M APPROX. FOOTPRINT: 7M LONG WHEN FULLY EXTENDED X 1M WIDE TOOLING WILL BE REMOVED AT THE POINT OF SALE INTERESTED PARTIES TO ASCERTAIN COMPLETENESS OF ITEM.

1995 MAZAK INTEGREX INTE50Y-1000 MACHINING CENTER S/N: 119470 WT - 10600KG HYDRAULIC CHUCK MAX: 700MM BETWEEN CENTRES: 1000MM 60 STATION TOOL CHANGER: 30 TURNING/30 MILLING MAX LOAD: 0.5 TONNES