BiMonthly Open CNC Fab No Reserve Auction

2012 MAKINO A51 NX HORIZONTAL MACHINING CENTER X AXIS 22 INCH Y AXIS 25.2 INCH Z AXIS 25.2 INCH 14,000 RPM SPINDLE SPINDLE TAPER CAT 40 PALLET-W 15.7 INCH PALLET-L 15.7 INCH 300 PSI THRU SPINDLE COOLANT FULL 4TH AXIS EQUIPPED WITH PROFESSIONAL 5 CONTROL, CHIP CONVEYOR, FULL 4TH AXIS, 300 PSI THRU SPINDLE COOLANT, 60 ATC

2025 ATLAS COPCO GA26VSD FF AIR COMPRESSOR VARIABLE SPEED ROTARY SCREW AIR COMPRESSOR WITH INTEGRATED DRYER 35 HP 164 CFM AT 100 PSI MAX PRESSURE 175 PSI VOLTAGE 200/230 EQUIPPED WITH INTEGRATED DRYER ZERO HOURS - NEW OLD STOCK 34.3-205.2 CFM CAPACITY OIL COOLED FERRITE ASSISTED SYNCHRONOUS RELUCTANCE MOTOR (IE5) NEOS NEXT VARIABLE SPEED DRIVE ELEKTRONIKON TOUCH CONTROLLER

2023 DE LUCIO 40FT STRAIGHT CHASSIS CONTAINER LENGTH: 40 FT WIDTH: 96 INCH HEIGHT: 51 INCH FRAME: TWIN IBEAM, ASTM572 G80 SUSPENSION: 4BAG AIR RIDE, FIXED, 40,000 LB AXLES: TANDEM, HEAVYDUTY ROUND, 30,000 LB BRAKES: DRUM, 30/30 CHAMBERS ABS: WABCO, 2S/1M KINGPIN: 2 INCH, 30 INCH LOCATION TWIST LOCKS: ISOSTANDARD FRONT & REAR TIRES: 11R22.5 WHEELS: (8) STEEL, 22.5X8.25 LANDING GEAR: DOUBLESPEED, PSSIDE CRANK LIGHTS: FULL LED PACKAGE

2023 DE LUCIO 40FT STRAIGHT CHASSIS CONTAINER LENGTH: 40 FT WIDTH: 96" HEIGHT: 51" FRAME: TWIN IBEAM, ASTM572 G80 SUSPENSION: 4BAG AIR RIDE, FIXED, 40,000 LB AXLES: TANDEM, HEAVYDUTY ROUND, 30,000 LB BRAKES: DRUM, 30/30 CHAMBERS ABS: WABCO, 2S/1M KINGPIN: 2", 30" LOCATION TWIST LOCKS: ISOSTANDARD FRONT & REAR TIRES: 11R22.5 WHEELS: (8) STEEL, 22.5X8.25 LANDING GEAR: DOUBLESPEED, PSSIDE CRANK LIGHTS: FULL LED PACKAGE

2004 BROCK 27' DIAMETER STEEL SILO WITH HOPPER BOTTOM, CAPACITY: 26,102 CU FT (118 TONS), SUPPORT LEGS, LADDER/CAGE, AND ATTACHED CATWALK CONNECTION. OVERALL HEIGHT: 60' 10". (2) BROCK 18' DIAMETER STEEL SILO WITH HOPPER BOTTOM, CAPACITY: 10,510 CU FT, SUPPORT LEGS, AND LADDER/CAGE. OVERALL HEIGHT: 52' 10". (1) BROCK 18' DIAMETER STEEL SILO WITH CONICAL BOTTOM, STEEL SUPPORT LEGS, AND ATTACHED LADDER/SAFETY CAGE. (2) FABRIC-COVERED INDUSTRIAL SHELTERS WITH STEEL FRAMES WITH (2) DONALDSON TORIT DUST COLLECTORS INSIDE. (2) GREEN STEEL SURGE/TRANSFER BINS WITH PLATFORMS AND RAILINGS. (2) POLY STORAGE TANKS (ONE ADVANTAGE TOUGH TANK AND ONE CONFINEDSPACE RATED TANK). (2) FLYING DUTCHMAN MODEL 41527 CHAIN UNLOADER (15HP). HONEYVILLE BUCKET ELEVATOR. WAM LEVEL SENSOR. ALL HOPPER BOTTOMS, DISCHARGE CONES, GATES, AND UNLOADER ASSEMBLIES ATTACHED TO THE SILOS OR BINS. ALL LADDERS, SAFETY CAGES, PLATFORMS, AND CATWALKS ATTACHED TO THE EQUIPMENT. ALL STRUCTURAL STEEL STANDS, FRAMES, AND SUPPORTS DIRECTLY ATTACHED TO THE EQUIPMENT. ALL PIPING, DUCTWORK, ELBOWS, AND CONNECTIONS PHYSICALLY ATTACHED TO THE EQUIPMENT.

2006 LEADWELL LTC-50BL CNC LATHE A2-11 SPINDLE 18 INCH CHUCK 1,500 RPM (12) STATION TURRET 27.5 INCH MAX TURNING DIAMETER 33.4 INCH MAX SWING 80.1 INCH MAX TURNING LENGTH 82.6 INCH Z AXIS TRAVEL 4.6 INCH BAR CAPACITY EQUIPPED WITH SCHMIDT RIP-218-FT STEADY REST, 3-POINT TURN THROUGH STEADY REST, FANUC 0I-TC, TAILSTOCK, CHIP CONVEYOR

2021 YASKAWA MOTOMAN YR-1-06VX180-120 A00 VERTICAL ARTICULATED INDUSTRIAL ROBOT, 6 AXES, YRC1000 CONTROLLER, FLOOR MOUNT. CAPACITIES: MAXIMUM PAYLOAD (WRIST): 120 KG, ADDITIONAL LOAD ON U-ARM: 30 KG, MAXIMUM REACH: 3,058 MM (APPROX. 120 IN), REPEATABILITY: 0.05 MM. AXIS MOTION RANGE: S-AXIS 180 TO +180, L-AXIS 60 TO +76, U-AXIS 86 TO +90, R-AXIS 360 TO +360, B-AXIS 130 TO +130, T-AXIS 360 TO +360. SPEEDS: S-AXIS 125/SEC, L-AXIS 115/SEC, U-AXIS 125/SEC, R-AXIS 182/SEC, B-AXIS 175/SEC, T-AXIS 265/SEC. ROBOT WEIGHT: 2250 LBS. EQUIPPED WITH YRC1000 CONTROLLER, CONTROL BOX, SECONDARY ELECTRICAL BOX, KEYENCE LIGHT CURTAINS (1 SET), COGNEX VISION SYSTEM, FRENCE PACKAGE, LESS THAN 100 TOTAL PRODUCTION HOURS.

2006 HWACHEON VT550 VERTICAL MACHINING CENTER. AXES: 2-AXIS (X, Z). TURRET CAPACITY: 12 TOOLS. CONSTRUCTION: BOX GUIDEWAYS FOR HEAVY CUTTING. CAPACITIES: MAX SWING DIAMETER: 820 MM (32.3 IN), MAX TURNING DIAMETER: 650 MM (25.6 IN), MAX TURNING HEIGHT / LENGTH: 700 MM (27.6 IN). TYPICAL CHUCK SIZE: 24 IN HYDRAULIC CHUCK. SPINDLES: 50 HP. TOOL STATIONS: 12-STATION TURRET. TRAVELS: X-AXIS TRAVEL: 350 MM (13.8 IN), Z-AXIS TRAVEL: 790 MM (31.1 IN). RAPID TRAVERSE (X / Z): APPROX. 350 / 790 MM/MIN. FLOOR SPACE: APPROX. 3000 X 2200 MM (118 X 87 IN). HEIGHT: APPROX. 3300 MM (130 IN). MACHINE WEIGHT: ~13,000 KG (28,600 LB). EQUIPPED WITH 2 TABLES, TWIN 50 HP SPINDLES, 2 CHIP CONVEYORS, FANUC 18I-TB CONTROL, 12 STATION TURRETS, AUTO DOORS.

2007 KOMO FUSION 524 CNC ROUTER. CAPACITY: TABLE SIZE: 24' X 5' - CONSISTING OF (2) 12' PINNED ALUMINUM WORKPIECE TABLES. X-TRAVEL: 288", Y-TRAVEL: 60", Z-TRAVEL: 12". 24' X 5' CONTINUOUS MACHINING CAPACITY. RPM: 24000. SPINDLE SPEED: 3150 IPM. HP: 14. HOURS: UNDER 15000 HOURS. 15-STATION AUTOMATIC TOOL CHANGER. SPINDLE TAPER: HSK 63F X ER40-75. VOLTAGE: 480V 3-PHASE 60 HZ. EQUIPPED WITH R & L SIDE (6-EACH SIDE) MANUAL ROLLER-BALL TYPE TRANSFER TABLES WITH PNEUMATIC POSITIONING LOCKS (AIR ACTUATED BALL TRANSFER TABLES (12 TOTAL)), PALLET CHANGEOVER SYSTEM, (2) 24' PALLETS, TRAVELING TABLE, STATIONARY BRIDGE, PORTABLE PEDESTAL TYPE CONTROL STAND WITH HAND PENDANT, KOOLANT KOOLERS DIMPLEX THERMAL SOLUTIONS MODEL JT750 SPINDLE OIL CHILLER, DUST COLLECTION SYSTEM WITH CYCLONE RECEIVER & DUST FILTER BAGS, VACUUM TABLES.

2007 LEADWELL LTC-35CL CNC LATHE. SPINDLE 15 CHUCK, 2,000 RPM. (12) STATION TURRET. 23.6 INCH MAX TURNING DIAMETER, 31.5 INCH MAX SWING, 60.2 INCH MAX TURNING LENGTH, 63 INCH Z AXIS TRAVEL. 4.5 INCH BAR CAPACITY. EQUIPPED WITH SCHMIDT RIP-218-FT STEADY REST, FANUC 0I-TC, TAILSTOCK, CHIP CONVEYOR, MIST COLLECTOR, CUSTOM COVERS.

2012 BYSTRONIC BYSTAR PRO 3015 4.4KW CO2 LASER CUTTER. TABLE SIZE (L X W): 118.11 INCH X 59.06 INCH. MAXIMUM WORKPIECE WEIGHT: 1,962 LB. MAXIMUM MILD STEEL THICKNESS: 0.98 INCH. MAXIMUM STAINLESS STEEL THICKNESS: 0.79 INCH. MAXIMUM ALUMINUM THICKNESS: 0.47 INCH. X-AXIS TRAVEL: 120.0 INCH. Y-AXIS TRAVEL: 60.0 INCH. Z-AXIS TRAVEL: 6.7 INCH. LASER WAVELENGTH: 10.6 M. MAXIMUM PARALLEL POSITIONING SPEED (X/Y): 3,150 INCH/MIN. MAXIMUM SIMULTANEOUS POSITIONING SPEED (X/Y): 4,449 INCH/MIN. POSITIONING ACCURACY: 0.0039 INCH. REPEATABILITY: 0.0020 INCH. DUST EXTRACTION UNIT POWER: 7.4 HP. TOTAL POWER REQUIREMENT: 52 KW. MACHINE DIMENSIONS (L X W X H): 507.9 INCH X 240.2 INCH X 81.5 INCH. TOTAL MACHINE WEIGHT: 29,983 LB. LASER SOURCE WEIGHT: 3,880 LB. DUST EXTRACTION UNIT WEIGHT: 2,425 LB. CONTROL SYSTEM: BYSTRONIC BYVISION CNC. LASER GENERATOR: BYSTRONIC BYLASER 4400. LASER POWER: 4.4 KW. EQUIPPED WITH CHILLER, DONALDSON TORIT DUST COLLECTION SYSTEM, BYLASER 4400 RESONATOR, BYLOADER 3015 SWING ARM LOADER (2022), AUTOMATIC DUAL SHUTTLE TABLES.

1995 LOUISVILLE STEAM TUBE DRYER. REFURBISHED IN 2004. OVERALL LENGTH: 72 FT. SHELL DIAMETER: 45 IN. DESIGN TYPE: ROTARY STEAM TUBE DRYER. ROTATION SPEED: 4 RPM. SLOPE: 3/16". DRIVE MOTOR: 15 HP. DRIVE BASE LOAD: 6,200 LBS. THRUST BASE LOAD: 30,000 LBS. FREE BASE LOAD: 30,000 LBS. EQUIPPED WITH STEAM MANIFOLD: JOHNSON CORP. ROTARY JOINT INTERFACE, DRILLED & TAPPED; INCLUDES 2" NPT SIPHON TUBE (2004 REPLACEMENT). TUBE BUNDLE: STEAMHEATED INTERNAL TUBE ASSEMBLY. INSULATION RINGS: (6) PLACES. RING GEAR (2004 REPLACEMENT). PINION GEAR (2004 REPLACEMENT). 15 HP DRIVE MOTOR (2004). EXISTING REDUCER. TRUNNION BASES (THRUST AND FREE). DRIVE BASE. BELT SEAL ASSEMBLY. MATERIAL INLET / VAPOR OUTLET HOUSING. PRODUCT DISCHARGE HOUSING.

2022 CREATBOT F1000 3D PRINTER BUILD VOLUME: 39" X 39" X 39" NUMBER OF NOZZLES: 2 RESOLUTION: .0039" LAYER RESOLUTION: .002" FILAMENT DIAMETER: .069" NOZZLE DIAMETER: .039" EXTRUDER TYPE: SMART DUAL EXTRUDER FILAMENT CAPABILITIES: ABS, PLA, CARBON FIBER, PETG, NYLON, PC, ETC. PRINT TECHNOLOGY: FUSED DEPOSITION MODEL BEST PRINTING SPEED: 2.36"/MIN MAX PRINTING SPEED: 4.72"/MIN X & Y POSITIONING PRECISION: .00043" MAX POWER: 4,000W MAX NOZZLE TEMP: 420 C MAX BED TEMP: 100C DIMENSIONS: 68.5" X 51.1" X 75.6" WEIGHT: 1,212LB

2007 OKK HM500S HORIZONTAL MACHINING CENTER. TRAVELS: X-AXIS TRAVEL: 24.8 TO 630 MM Y-AXIS TRAVEL: 24.4 TO 620 MM Z-AXIS TRAVEL: 27.9 TO 710 MM. RPM: 10000 HP: 30. 1000 PSI CTS. RAPID 2125 IPM. FEED: 1575 IPM. PALLET LOAD: 991 LBS. WEIGHT: 27000 LBS. EQUIPPED WITH FULL 4TH AXIS, 60 TOOL MAGAZINE.

2015 LISSMAC SBM-L 1500 SURFACE TREATMENT MACHINE. MAXIMUM WORKING WIDTH: 60 INCH. WORKABLE MATERIAL THICKNESS: 0.02-1.97 INCH. BELT DIMENSIONS: 60 X 10. WEIGHT: 6,180 LBS. DIMENSIONS: 130L X 59W X 71H. EQUIPPED WITH ISSUES WITH PARTS GETTING STUCK AND GAUGING ON THE LEFT SIDE OF THE FEED, DUST COLLECTOR ERROR.

1999 STAR SR-20 SWISS LATHE. CONTROL AXIS SPECIFICATIONS: RAPID FEED RATES (Z, X ,Y, ZB, XB) 787.4/MIN, RAPID FEED RATE (C) 550 RPM, TURNING FEED RATE (Z, X, Y, ZB, XB) MAXIMUM 393.7/MIN, TURNING FEED RATE (C) MAXIMUM 27.8 RPM, INPUT INCREMENT (X, Y, XB) MINIMUM 0.0001, INPUT INCREMENT (Z, ZB) MINIMUM 0.0001, INPUT INCREMENT (C) MINIMUM 0.001. MACHINING CAPABILITY: TURNING DIAMETER MAXIMUM 0.787 INCH, HEADSTOCK STROKE MAXIMUM 8.07 INCH, DRILLING CAPACITY MAXIMUM STATIONARY TOOLING 25/64 INCH, POWER-DRIVEN 5/16 INCH. TAPPING CAPACITY MAXIMUM STATIONARY TOOLING M8 X P1.25, POWER-DRIVEN M6 X P1.0. MILLING CAPABILITY (POWER DRIVEN TOOL) MAXIMUM 25/64 INCH. DIE CUTTING CAPABILITY (STATIONARY TOOL) MAXIMUM M8 X P1.25. SLOTTING CAPABILITY (POWER-DRIVEN TOOL) MAXIMUM 0.059(W) X 0.157(D) INCH. MAIN SPINDLE: SPINDLE SPEED 500 - 10,000 RPM, SPEED CONTROL S CODE + DIRECT 5 DIGIT COMMAND, SPINDLE INDEXING 0.01 (C-AXIS CONTROL), ROTATIONAL CONTROL AC SPINDLE DRIVE, MAIN SPINDLE MOTOR 3HP (CONTINOUS)/5 HP (15 MIN/50%ED). TOOL POST: TOOL (NO. OF TOOLS) 6, SLEEVE (NO. OF TOOLS) 4, POWER DRIVEN (NO. OF TOOLS) 3~8 (3 TOOLS FOR CROSS-MILLING ARE STANDARD). SPINDLE SPEED (POWER DRIVEN ATTACHMENT) MAXIMUM 8000 RPM, SPEED CONTROL (POWER DRIVEN ATTACHEMNT) AC SERVO DRIVE. COOLANT UNIT: CAPACITY 40.9 GAL, MOTOR 0.5 HP, SAFETY DEVICE COOLANT LEVEL & FLOW DETECTORS. HYDRAULIC POWER UNIT: CAPACITY 2.6 GAL, NORMAL PRESSURE 493 PSI, PUMP MOTOR 1 HP. PNEUMATIC UNIT: NORMAL PRESSURE 72.5 PSI, PIPING BORE RC1/4, PNEUMATIC AMOUNT 2.41 CFM. LUBRICATION SYSTEM: OIL DISCHARGE AMOUNT 0.09 IN^3, TANK CAPACITY 0.21 GAL. BACK ATTATCHMENT: CHUCKING DIAMETER MAXIMUM 0.787 INCH, PART LENGTH MAXIMUM 3.14 INCH, PART PROJECTION LENGTH MAXIMUM 1.18 INCH, PART INSERT LENGTH MAXIMUM 2.95 INCH. SUB-SPINDLE: SPEED 500 - 8000 RPM, SPEED CONTROL S CODE + DIRECT 4 DIGIT COMMAND, ROTATIONAL CONTROL AC SPINDLE DRIVE, INDEXING ANGLE MINIMUM 15 (24 DIVISIONS), MOTOR 2 HP (CONTINOUS) / 3 HP (15MIN/50%ED). MACHINING CAPABILITY: NO. OF TOOLS (BACK 4-SPINDLE UNIT) 4, NO. OF TOOLS (4-SPINDLE SLEEVE HOLDER) 4, DRILLING CAPABILITY (STATIONARY TOOL) MAXIMUM 5/16 INCH, DRILLING CAPABILITY (POWER DRIVEN TOOL) MAXIMUM 17/32 INCH, TAPPING CAPABILITY (STATIONARY TOOL) MAXIMUM M8 X P1.25, TAPPING CAPABILITY (POWER DRIVEN TOOL) MAXIMUM M4 X P0.7 (M3 X P0.5 FOR RIGID-TAPPING), MILLING CAPABILITY (POWER DRIVEN TOOL) 0.196 INCH. SPEED (POWER DRIVEN ATTACHMENT) 500 - 8000 RPM, MOTOR (POWER DRIVEN ATTACHMENT) 0.5 HP. ELECTRICS. DIMENSIONS APPROXIMATE 87L X 43W X 67H. WEIGHT APPROXIMATE 4850 LBS. EQUIPPED WITH SINGLE TUBE BARFEED.

2008 LANTECH Q-300 SHRINK WRAP MACHINE. TURNTABLE: 99 INCH TOWER HEIGHT: 92 INCH

2007 MESSER METAL MASTER PLUS PLASMA CUTTER. TABLE SIZE: 6' WIDE X 24' LONG. AMPS: 260. EQUIPPED WITH MESSER CNC CONTROLS, HYPERTHERM 260XD HI-DEFINITION PLASMA SOURCE, WET SLAG COLLECTION SYSTEM, DUST COLLECTOR, DRY TABLE, SINGLE PLASMA HEAD.

2010 BYSTRONIC BYSPRINT PRO 3015 4.4KW CO2 LASER CUTTER NOMINAL SHEET SIZE: 5 X 10 MAXIMUM SIMULTANEOUS POSITIONING SPEED: 5500/MIN MAXIMUM AXIS ACCELERATION: 472/S2 CUTTING AREA (X): 120 INCH CUTTING AREA (Y): 60 INCH CUTTING AREA (Z): 2.76 INCH POSITIONING ACCURACY PA: 0.004 REPEATABILITY PS: 0.002 MAX WORKPIECE WEIGHT: 1958 LBS EQUIPPED WITH CHILLER, DONALDSON TORIT DUST COLLECTION SYSTEM, LIGHT CURTAINS IN LOADING AREA, BYLOADER 3015 (SWING ARM LOADER), AUTOMATIC DUAL SHUTTLE TABLES

2000 MORI SEIKI SH-403 HORIZONTAL MACHINING CENTER X: 22.0" Y: 20.1" Z: 20.1" NUMBER OF PALLETS: 2 PALLET SIZE: 15.7" X 15.7" MAX TABLE LOAD: 660 LBS TABLE SURFACE TO SPINDLE CENTER: 2.0"-22.0" TABLE CENTER TO SPINDLE: 3.9"-24.0" MAX WORKPIECE HEIGHT: 25.6" B-AXIS INDEXING: 1 INCREMENTS B-AXIS ROTATION TIME (90): 2.5 SEC SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: CAT 40 SPINDLE MOTOR: 30 HP RAPID TRAVERSE X/Y/Z: 1,260 IPM ATC CAPACITY: 40 TOOLS MAX TOOL LENGTH: 11.8" MAX TOOL DIAMETER (ADJACENT EMPTY): 4.9" TOOL-TO-TOOL CHANGE TIME: 1.5 SEC CHIP-TO-CHIP TIME: 3.7 SEC PALLET CHANGE TIME: 5 SEC EQUIPPED WITH (1) ADDITIONAL PALLET, (4) TOMBSTONES, CHIPBLASTER COOLANT SYSTEM

1995 MORI-SEIKI MV-55 VERTICAL MACHINING CENTER. XAXIS TRAVEL: 41.3 IN YAXIS TRAVEL: 21.7 IN ZAXIS TRAVEL: 22.0 IN TABLE SIZE: 51.2 IN X 21.7 IN MAX TABLE LOAD: 3,300 LBS SPINDLE TAPER: CAT 50 SPINDLE SPEED: 5,000 RPM SPINDLE MOTOR: 15 HP TOOL CHANGER CAPACITY: 30 ATC RAPID TRAVERSE (X/Y/Z): 472 / 472 / 394 IPM CUTTING FEED RATE: 0.1197 IPM DIMENSIONS: 135" X 120" X 115" WEIGHT: 22,000 LBS. EQUIPPED WITH APPROXIMATELY 50 PIECES OF CAT50 TOOLING, BOXWAY CONSTRUCTION, FANUC CONTROL.

MANUAL ENGINE LATHE SWING OVER BED: 39.37 INCH (1000 MM) DISTANCE BETWEEN CENTERS: 196.85 INCH (5000 MM) SWING OVER CROSS SLIDE: 25 INCH SPINDLE BORE: 4.25 INCH (108 MM) SPINDLE SPEED RANGE: 81250 RPM SPINDLE MOTOR POWER: 30.8 HP (23 KW) EQUIPPED WITH 25 INCH 3 JAW CHUCK COOLANT SYSTEM STEADY REST MAX WORKPIECE DIAMETER: 14.5 INCH, MAX RING ID: 16 INCH TAILSTOCK

2001 TOOLMEX TUR 630 MN CNC LATHE CHUCK SIZE: 16 INCH DISTANCE BETWEEN CENTERS: 118 INCH SWING OVER BED: 24.8 INCH SPINDLE SPEED RANGE: 5-2500RPM SPINDLE BORE: 3.5 INCH EQUIPPED WITH STEADY REST, TAIL STOCK, SIEMENS SINUMERICK CNC CONTROL

2024 STRATASYS F170 3D PRINTER. BUILD ENVELOPE (XYZ): 10 X 10 X 10 IN. SYSTEM DIMENSIONS: 64 X 34 X 28 IN. SYSTEM WEIGHT: 500 LBS. WITH FULL CONSUMABLES. MATERIAL BAYS: 2 TOTAL (1 MODEL, 1 SUPPORT). LAYER THICKNESSES: 0.127 MM, 0.178 MM, 0.254 MM, 0.330 MM. LIGHTLY USED.

2000 MORI SEIKI ZL-35MC/750 CNC LATHE CNC TURNING CENTER WITH MILLING CAPABILITY CNC CONTROL: FANUC 16T / 16TT OR FANUC 18T NUMBER OF AXES: 4 (X1, Z1, X2, Z2) WITH C-AXIS TURRETS: 2 (UPPER & LOWER) CAPACITIES: MAX SWING OVER BED: ~23.6 INCH (600 MM) SWING OVER CROSS SLIDE: ~16.7 INCH (425 MM) MAX TURNING DIAMETER: ~16.730.7 INCH DEPENDING ON CONFIGURATION MAX TURNING LENGTH: ~30.7 INCH (780 MM) DISTANCE BETWEEN CENTERS: ~3235 INCH (810890 MM) BAR CAPACITY: ~4.1 INCH (105 MM) SPINDLE: 15 INCH HYDRAULIC CHUCK 30 HP BORE: 3 INCH SPEED: 2000 RPM AXIS TRAVELS: UPPER TURRET X-AXIS TRAVEL: ~8.89.4 INCH Z-AXIS TRAVEL: ~33.7 INCH LOWER TURRET X-AXIS TRAVEL: ~8.3 INCH Z-AXIS TRAVEL: ~33.7 INCH RAPID TRAVERSE X-AXIS: ~472 IPM Z-AXIS: ~590 IPM FLOOR SPACE: APPROX. 145 INCH 73 INCH 208 INCH 79 INCH DEPENDING ON ENCLOSURE HEIGHT: ~90 INCH MACHINE WEIGHT: ~22,000 24,200 LBS EQUIPPED WITH LIVE TOOLING, C-AXIS, TWIN TURRETS, 4TH AXIS, 15 INCH CHUCK, TAILSTOCK

1996 MORI SEIKI ZL-35 CNC LATHE. GENERAL CAPACITY: MAXIMUM SWING OVER BED: ~23.6 INCH (600 MM) SWING OVER CROSS SLIDE: ~16.7 INCH (425 MM) MAXIMUM TURNING DIAMETER: ~15.4-16.5 INCH (390-420 MM) MAXIMUM TURNING LENGTH: ~30.7 INCH (780 MM) (750 MODEL) DISTANCE BETWEEN CENTERS: ~35 INCH (890 MM). SPINDLE: SPINDLE NOSE: A2-8 SPINDLE BORE: 3 INCH SPINDLE SPEED RANGE: APPROX. 9-2,500 RPM SPINDLE MOTOR: 30 HP CHUCK SIZE: 15 INCH. AXIS TRAVELS: X-AXIS TRAVEL: ~8.9 INCH (UPPER TURRET) / ~8.3 INCH (LOWER TURRET) Z-AXIS TRAVEL: ~33.7 INCH (855 MM). RAPID TRAVERSE X-AXIS: ~472 IPM (12,000 MM/MIN) RAPID TRAVERSE Z-AXIS: ~590 IPM (15,000 MM/MIN). CONTROL: MORI-FANUC MF-D6. FLOOR SPACE: APPROX. 205-230 INCH L X 78-79 INCH W X 90 INCH H. MACHINE WEIGHT: APPROX. 24,000-28,000 LBS (10,900-12,700 KG). EQUIPPED WITH 15 INCH CHUCK, MF-D6 FANUC CONTROL.

2009 ATLAS COPCO ZR45MED AIR COMPRESSOR REBUILT IN 2022 WITH NEW COOLERS AND NEW MOTOR MAXIMUM PRESSURE: 7.5 BAR / 108 PSI / 0.75 MPA CAPACITY (FREE AIR DELIVERY): 241.1 CFM MOTOR POWER: 60 HP / 45KW MOTOR SPEED: 3,570 RPM COOLING TYPE: WATERCOOLED LUBRICATION: OILFREE (CLASS 0) EQUIPPED WITH ELEKTRONIKON CONTROLLER INTEGRATED AFTER COOLER NEW COOLERS INSTALLED IN 2022 NEW MOTOR INSTALLED IN 2022

2009 ATLAS COPCO ZR45MED AIR COMPRESSOR REBUILT IN 2022 WITH NEW COOLERS AND NEW MOTOR MAXIMUM PRESSURE: 7.5 BAR / 108 PSI / 0.75 MPA CAPACITY (FREE AIR DELIVERY): 241.1 CFM MOTOR POWER: 60 HP / 45KW MOTOR SPEED: 3,570 RPM COOLING TYPE: WATERCOOLED LUBRICATION: OILFREE (CLASS 0) EQUIPPED WITH ELEKTRONIKON CONTROLLER INTEGRATED AFTER COOLER NEW COOLERS INSTALLED IN 2022 NEW MOTOR INSTALLED IN 2022

1997 JET BD-920N CNC LATHE. BELT-DRIVE BENCH LATHE (TABLETOP LATHE). SWING OVER BED - 8-3/4 INCH. DISTANCE BETWEEN CENTERS - 20 INCH. SWING OVER CROSS SLIDE - 5-1/4 INCH. SPINDLE BORE - 25/32 INCH (0.781 INCH). SPINDLE MOUNT - 1-1/2 INCH X 8 TPI. SPINDLE TAPER (WITH SLEEVE) - MT-3. TAILSTOCK TAPER - MT-2. SPINDLE SPEED RANGE - 130-2000 RPM. MOTOR - 3/4 HP, 1-PHASE, 115V. THREADS (INCH) - 8-56 TPI. LONGITUDINAL FEED RANGE - 0.0005-0.0011 INCH IPR. MAX TOOL SIZE - 1/2 INCH X 1/2 INCH. EQUIPPED WITH MANUAL, ACCESSORIES.

2003 SPIRAL HELIX SPORT GORELOCKER ELBOW GORE FORMING MACHINE. MATERIAL THICKNESS (GAUGE CAPACITY): 18 TO 26 GA (1.20.5 MM). MATERIAL TYPES: GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM. GORE DIAMETER RANGE: 9 TO 50 INCH (225 TO 1250 MM). ELBOW ANGLES SUPPORTED: 90, 60, 45, 30, CUSTOM ANGLES. FLANGE HEIGHT RANGE: 0.375 TO 0.750 INCH (9.5 TO 19 MM). EDGE FORMING FUNCTIONS: FLANGING, CLOSING, LOCKSEAM FORMING. SEGMENT TYPES: ELBOWS, REDUCERS, TRANSITIONS, SEGMENTED FITTINGS. EQUIPPED WITH: MULTIPLE HARDENED STEEL FORMING ROLLS, FLANGING / CLOSING / LOCKSEAM ROLL SETS, HYDRAULIC ROLL ENGAGEMENT SYSTEM, GEARDRIVEN FORMING HEAD, MANUAL KEYEDSHAFT ROLL CHANGE SYSTEM.

KALTENBACH KKS 400H COLD SAW. SAW BLADE DIAMETER: 15.75 INCH. CUTTING CAPACITY AT 90 (ROUND): 5.12 INCH. CUTTING CAPACITY AT 90 (RECTANGLE): 12.01 INCH X 1.57 INCH. CUTTING CAPACITY AT 45 MITRE (ROUND): 5.12 INCH. CUTTING CAPACITY AT 45 MITRE (RECTANGLE): 9.65 INCH X 1.57 INCH. CUTTING SPEED: 32.8 / 65.6 FT/MIN. DRIVE MOTOR: 380 VOLT, 2.3 / 3.5 HP. MACHINE DIMENSIONS (L X W X H): 43.3 INCH X 39.4 INCH X 74.8 INCH. MACHINE WEIGHT: 1,543 LB.

2005 CHARMILLES HD 30CNC HOLE POPPER EDM X: 11.81 INCH Y: 7.87 INCH Z: 11.81 INCH TABLE SURFACE: 11.8 INCH 15.7 INCH MAX WORKPIECE DIMENSIONS: 28.7 INCH 18.5 INCH MAX WORKPIECE WEIGHT: 661 LBS AUXILIARY AXIS (MANUAL, VERTICAL): 3.94 INCH ELECTRODE DIAMETER RANGE: 0.012 INCH 0.118 INCH MAXIMUM HOLE DEPTH: 7.87 INCH POWER SUPPLY: 3/PE~ 380V, 50/60 HZ, 4 KVA SHORT-CIRCUIT INTERRUPTING CAPACITY: 1.5 KA MAX MACHINING CURRENT: 30 A DEGREE OF PROTECTION: IP32 WORKING FLUID: CLEAN WATER MAX PUMP OPERATING PRESSURE: ~1,015 PSI OVERALL DIMENSIONS: 35.4 INCH W 52.8 INCH D 76.4 INCH H WEIGHT: 2,006 LBS EQUIPPED WITH FULLY CNC X Y Z, SINGLE & MULTI-HOLE PROGRAMS, AUTO EDGE/CENTER FINDING CYCLES

1970 ALMCO OR-10VA ROUND BOWL VIBRATORY MACHINE. WORKING CAPACITY: 9 CU FT. BOWL DIAMETER: 42 INCH. ELECTRICAL REQUIREMENTS: 480V, 3PHASE. EQUIPPED WITH SPRING ISOLATED BASE. BASE MOUNTED VIBRATORY MOTOR.

1998 CHARMILLES ROBOFORM 51 SINKER EDM X: 23.6 INCH Y: 15.7 INCH Z: 17.7 INCH C: FULL 360 TABLE DIMENSIONS: 29.5 INCH 19.7 INCH MAX WORKPIECE DIMENSIONS: 47.2 INCH 33.5 INCH 17.7 INCH MAX WORKPIECE WEIGHT: 3,527 LBS TYPE: ISOPULSE, 64 AMP ACHIEVABLE SURFACE FINISH: RA 0.3 M MACHINE FOOTPRINT: APPROX. 78.7 INCH 63 INCH 98.4 INCH WEIGHT: APPROX. 6,600-7,700 LBS EQUIPPED WITH 14 INCH COLOR CRT MONITOR FLOPPY DISK DRIVE(S) PROGRAM EXPERT & PILOT EXPERT ADAPTIVE SOFTWARE ON-BOARD CONVERSATIONAL PROGRAMMING AUTO MEASURING CYCLES, CONTOURING, VECTOR/FREE/SERVO PLANETARY EROSION MODES

1997 MURATEC CENTRUM 2500 PUNCH PRESS PUNCHING CAPACITY: 22 TONS PRESS DRIVE MOTOR: 5 HP CLUTCH / BRAKE SYSTEM: HYDRAULIC THROAT DEPTH: 51.18 IN TABLE TRAVEL (X X Y): 52.56 IN X 50.80 IN MAXIMUM SHEET SIZE: 49 IN X 49 IN MAXIMUM SHEET SIZE WITH ONE REPOSITION USING SUPPORT TABLES: 49 IN X 98 IN MAXIMUM SHEET WEIGHT: 165 LBS MAXIMUM MATERIAL THICKNESS: 0.250 IN RAM STROKE: 1.2 IN STRIPPER / DIE CLEARANCE: 0.84 IN TURRET CAPACITY: 22 STATIONS OVERALL DIMENSIONS: 113 IN W X 169 IN L X 73 IN H APPROXIMATE WEIGHT: 20,900 LBS EQUIPPED WITH FULL SET OF TOOLING

1987 SWECO DM-3L VIBRO-ENERGY VIBRATORY GRINDING MILL (MEDIA MILL) CHAMBER CAPACITY - 3.0 CU. FT. CHAMBER DIAMETER - 32 INCH MEDIA LOAD (CERAMIC) - 100-300 LB MEDIA LOAD (STEEL) - 300-600 LB MOTOR - 1.0 HP TO 1.25 HP MOTOR SPEED - ~1150-1200 RPM

2000 WIDOS WILHELM PURE PLUS HT1500 CNC INFRARED PLASTIC WELDING SYSTEM MAXIMUM TEMPERATURE: 968 F (520 C) TYPICAL PIPE RANGE: .75" - 1.25" (2032 MM) WELDING PROCESS: INFRARED (IR) BUTTFUSION WELDING MATERIAL COMPATIBILITY: PVDF, PP, PE, AND OTHER THERMOPLASTICS EQUIPPED WITH CONTROL SYSTEM: CNC WITH CARDBASED AUTHORIZATION INCLUDES: MASTER CARD, LEGITIMACY CARD, COMMAND CARDS, CLAMPS, TRANSPORT CASE REQUIRES NEW HEATER TO BE INSTALLED TO BE FULLY FUNCTIONAL

1996 VAN DORN DEMAG 170 HT8 INJECTION MOLDING MACHINE. CLAMP TONNAGE: 170 TONS. CLAMP STYLE: 4 POST TOGGLE. TIE BAR SPACING: 20" X 20". PLATEN SIZE: 29" X 29". DAYLIGHT MINIMUM: 6". DAYLIGHT MAXIMUM: 35". MAX MOLD HEIGHT: 18". MIN MOLD HEIGHT: 6". EJECTOR STROKE: 4". SHOT SIZE: 8 OZ. INJECTION UNIT TYPE: HORIZONTAL. EQUIPPED WITH HOPPER FEED SYSTEM, TRANSPARENT SAFETY ENCLOSURE, HYDRAULIC KNOCKOUT, CORE PULL.

HAEGER HP-6D PEMSERTER INSERTION PRESS. PRESS FORCE CAPACITY (TONNAGE): 6 TONS. RAM STROKE: 6 IN. THROAT DEPTH: 18 IN. ADJUSTABLE RAM FORCE: 500 LBS UP TO 12,000 LBS. UPPER TOOLING SHANK: 3/4" (0.75"). LOWER TOOLING / ANVIL RECEIVER: 5/8" (0.625"). CYCLE TIME: 1.5 SECONDS PER INSERTION. EQUIPPED WITH PUSH BUTTON CONTROL, FOOT PEDAL ACTUATION.

2005 KNUTH HYDRO-JET ECO 0515 WATER JET. ABRASIVE WATERJET CUTTING SYSTEM WITH MAXIMUM OPERATING PRESSURE OF ~50,000 PSI (3,450 BAR). MAXIMUM CUTTING SPEED OF ~157 IPM. TYPICAL CUTTING CAPACITY UP TO ~12 IN (1213 MM) ALUMINUM, THIN STAINLESS, STONE, GLASS, CERAMICS. TABLE WORKING SURFACE APPROX. 59 IN X 20 IN (1500 X 500 MM). TYPICAL BED SIZE AROUND 29 IN X 70 IN CUTTING BED FOOTPRINT. Z-AXIS TRAVEL APPROX. 3 IN (75 MM). PUMP PRESSURE 50,000 PSI. ABRASIVE HOPPER CAPACITY ~441 LB. HIGH-PRESSURE ABRASIVE JET SYSTEM. ELECTRICAL REQUIREMENTS: 220 V / 3-PHASE / 60 HZ. EQUIPPED WITH MF 5V W/ 3-AXIS DIGITAL READOUT, 8 INCH RISER FOR MF V 5, AUTO DRAWBAR, Y-AXIS POWER FEED, ST 380 SWIVEL TABLE.