ARC Specialties Dual Hot Wire GTAW Tripulse Pipe Cladding Systems and LP Dye Penetrant Testing System

2015 TRIPULSE DUAL HOT WIRE GTAW PIPE CLADDING SYSTEM 42' PIPE LENGTH CAP., 15.98" MAX. PART O.D., 6" MIN. PART I.D., HOT WIRE GAS TUNGSTEN ARC WELDING PROCESS, 4130 BASE MATERIAL, 1/16" FILLER WIRE, MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO CAMERAS, PLC CONTROL, 480V / 3P / 60HZ ELECTRICAL. S/N: 1543-21026 EQUIPMENT DETAILS: THE TRIPULSE CLADDING SYSTEM IS A PLC CONTROLLED HORIZONTAL CLADDING SYSTEM THAT HAS THE TRIPULSE SOFTWARE WITH DATA LOGGING FOR EACH TORCH. THE TORCH MOUNT IS A STEEL STRUCTURE WITH PRECISION GUIDE WAYS TO ALLOW THE TORCH CARRIAGE TO MOVE ALONG WHILE WELDING. THE TORCH CARRIAGE HAS TWO HOT WIRE GAS TUNGSTEN ARC TORCHES WITH AVC LINKAGE FOR EACH TORCH. THE TORCH MOUNT IS SECURED TO THE MACHINE CART THAT TRAVELS ON A TRACK TO ENTER INSIDE THE PART. THE MACHINE CART HAS SOME OF THE WELDING EQUIPMENT MOUNTED TO IT SUCH AS THE WIRE FEEDERS AND WIRE SPOOLS. THE PART IS ROTATED BY TURNING ROLLS. THE SYSTEM HAS ONE DRIVER TURNING ROLL ASSEMBLY THAT IS STATIONARY AND CONNECTED TO THE TORCH SUPPORT BASE. THE TORCH SUPPORT BASE HAS A MATING CUT OUT THAT THE TORCH MOUNT DRIVES INTO TO STEADY AND SUPPORT ITSELF WHILE THE TORCH CARRIAGE TRAVELS THROUGH THE PART DURING THE WELDING PROCESS. THE TORCH SUPPORT BASE ALSO HAS AN END STOP ROLLER TO PREVENT WALKING OF THE HOUSING. THE IDLER ROLLER ASSEMBLY IS ADJUSTABLE ALONG A TRACK FOR DIFFERENT LENGTHS. THE ELECTRICAL ENCLOSURE AND WELDING EQUIPMENT IS PLACED BESIDE THE MACHINE FOR ACCESSIBILITY.

2015 TRIPULSE DUAL HOT WIRE GTAW PIPE CLADDING SYSTEM 42' PIPE LENGTH CAP., 15.98" MAX. PART O.D., 6" MIN. PART I.D., HOT WIRE GAS TUNGSTEN ARC WELDING PROCESS, 4130 BASE MATERIAL, 1/16" FILLER WIRE, MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO CAMERAS, PLC CONTROL, 480V / 3P / 60HZ ELECTRICAL. EQUIPMENT DETAILS: THE TRIPULSE CLADDING SYSTEM IS A PLC CONTROLLED HORIZONTAL CLADDING SYSTEM THAT HAS THE TRIPULSE SOFTWARE WITH DATA LOGGING FOR EACH TORCH. THE TORCH MOUNT IS A STEEL STRUCTURE WITH PRECISION GUIDE WAYS TO ALLOW THE TORCH CARRIAGE TO MOVE ALONG WHILE WELDING. THE TORCH CARRIAGE HAS TWO HOT WIRE GAS TUNGSTEN ARC TORCHES WITH AVC LINKAGE FOR EACH TORCH. THE TORCH MOUNT IS SECURED TO THE MACHINE CART THAT TRAVELS ON A TRACK TO ENTER INSIDE THE PART. THE MACHINE CART HAS SOME OF THE WELDING EQUIPMENT MOUNTED TO IT SUCH AS THE WIRE FEEDERS AND WIRE SPOOLS. THE PART IS ROTATED BY TURNING ROLLS. THE SYSTEM HAS ONE DRIVER TURNING ROLL ASSEMBLY THAT IS STATIONARY AND CONNECTED TO THE TORCH SUPPORT BASE. THE TORCH SUPPORT BASE HAS A MATING CUT OUT THAT THE TORCH MOUNT DRIVES INTO TO STEADY AND SUPPORT ITSELF WHILE THE TORCH CARRIAGE TRAVELS THROUGH THE PART DURING THE WELDING PROCESS. THE TORCH SUPPORT BASE ALSO HAS AN END STOP ROLLER TO PREVENT WALKING OF THE HOUSING. THE IDLER ROLLER ASSEMBLY IS ADJUSTABLE ALONG A TRACK FOR DIFFERENT LENGTHS. THE ELECTRICAL ENCLOSURE AND WELDING EQUIPMENT IS PLACED BESIDE THE MACHINE FOR ACCESSIBILITY. S/N: 1549-21026

2015 ARC SPECIALTIES TRIPULSE DUAL HOT WIRE GTAW PIPE CLADDING SYSTEM 42' PIPE LENGTH CAP., 15.98" MAX. PART O.D., 6" MIN. PART I.D., HOT WIRE GAS TUNGSTEN ARC WELDING PROCESS, 4130 BASE MATERIAL, 1/16" FILLER WIRE, MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO CAMERAS, PLC CONTROL, 480V / 3P / 60HZ ELECTRICAL. EQUIPMENT DETAILS: THE TRIPULSE CLADDING SYSTEM IS A PLC CONTROLLED HORIZONTAL CLADDING SYSTEM THAT HAS THE TRIPULSE SOFTWARE WITH DATA LOGGING FOR EACH TORCH. THE TORCH MOUNT IS A STEEL STRUCTURE WITH PRECISION GUIDE WAYS TO ALLOW THE TORCH CARRIAGE TO MOVE ALONG WHILE WELDING. THE TORCH CARRIAGE HAS TWO HOT WIRE GAS TUNGSTEN ARC TORCHES WITH AVC LINKAGE FOR EACH TORCH. THE TORCH MOUNT IS SECURED TO THE MACHINE CART THAT TRAVELS ON A TRACK TO ENTER INSIDE THE PART. THE MACHINE CART HAS SOME OF THE WELDING EQUIPMENT MOUNTED TO IT SUCH AS THE WIRE FEEDERS AND WIRE SPOOLS. THE PART IS ROTATED BY TURNING ROLLS. THE SYSTEM HAS ONE DRIVER TURNING ROLL ASSEMBLY THAT IS STATIONARY AND CONNECTED TO THE TORCH SUPPORT BASE. THE TORCH SUPPORT BASE HAS A MATING CUT OUT THAT THE TORCH MOUNT DRIVES INTO TO STEADY AND SUPPORT ITSELF WHILE THE TORCH CARRIAGE TRAVELS THROUGH THE PART DURING THE WELDING PROCESS. THE TORCH SUPPORT BASE ALSO HAS AN END STOP ROLLER TO PREVENT WALKING OF THE HOUSING. THE IDLER ROLLER ASSEMBLY IS ADJUSTABLE ALONG A TRACK FOR DIFFERENT LENGTHS. THE ELECTRICAL ENCLOSURE AND WELDING EQUIPMENT IS PLACED BESIDE THE MACHINE FOR ACCESSIBILITY. S/N: 1545-21026

2015 ARC SPECIALTIES TRIPULSE DUAL HOT WIRE GTAW PIPE CLADDING SYSTEM 42' PIPE LENGTH CAP., 15.98" MAX. PART O.D., 6" MIN. PART I.D., HOT WIRE GAS TUNGSTEN ARC WELDING PROCESS, 4130 BASE MATERIAL, 1/16" FILLER WIRE, MANUAL PART LOADING, MANUAL INITIAL TORCH POSITIONING, MANUAL PROCESS START, AUTOMATIC PROCESS STOP CONTROL, MANUAL PART UNLOADING, AUTOMATIC VOLTAGE CONTROL, VIDEO CAMERAS, PLC CONTROL, 480V / 3P / 60HZ ELECTRICAL. EQUIPMENT DETAILS: THE TRIPULSE CLADDING SYSTEM IS A PLC CONTROLLED HORIZONTAL CLADDING SYSTEM THAT HAS THE TRIPULSE SOFTWARE WITH DATA LOGGING FOR EACH TORCH. THE TORCH MOUNT IS A STEEL STRUCTURE WITH PRECISION GUIDE WAYS TO ALLOW THE TORCH CARRIAGE TO MOVE ALONG WHILE WELDING. THE TORCH CARRIAGE HAS TWO HOT WIRE GAS TUNGSTEN ARC TORCHES WITH AVC LINKAGE FOR EACH TORCH. THE TORCH MOUNT IS SECURED TO THE MACHINE CART THAT TRAVELS ON A TRACK TO ENTER INSIDE THE PART. THE MACHINE CART HAS SOME OF THE WELDING EQUIPMENT MOUNTED TO IT SUCH AS THE WIRE FEEDERS AND WIRE SPOOLS. THE PART IS ROTATED BY TURNING ROLLS. THE SYSTEM HAS ONE DRIVER TURNING ROLL ASSEMBLY THAT IS STATIONARY AND CONNECTED TO THE TORCH SUPPORT BASE. THE TORCH SUPPORT BASE HAS A MATING CUT OUT THAT THE TORCH MOUNT DRIVES INTO TO STEADY AND SUPPORT ITSELF WHILE THE TORCH CARRIAGE TRAVELS THROUGH THE PART DURING THE WELDING PROCESS. THE TORCH SUPPORT BASE ALSO HAS AN END STOP ROLLER TO PREVENT WALKING OF THE HOUSING. THE IDLER ROLLER ASSEMBLY IS ADJUSTABLE ALONG A TRACK FOR DIFFERENT LENGTHS. THE ELECTRICAL ENCLOSURE AND WELDING EQUIPMENT IS PLACED BESIDE THE MACHINE FOR ACCESSIBILITY. S/N: 1548-21026

2015 ARC SPECIALTIES LP PIPE INSPECTION SYSTEM FOR DYE PENETRANT TESTING S/N: 1568-21030 - NOTE: SPECIFICATIONS AS WRITTEN BY ARC SPECIALTIES PROCESS: LP DYE PENETRANT TESTING, DYE: FLUORESCENT, MAXIMUM PIPE LENGTH: 40' LP PIPE INSPECTION: THE DYE-PENETRATE WILL HAVE A STEEL STRUCTURE WITH GUIDE WAYS TO ALLOW THE HEAD ASSEMBLY CARRIAGE TO MOVE ALONG WHILE TESTING. THE TEST HEAD ASSEMBLY MOUNT IS SECURED TO THE MACHINE CART THAT TRAVELS ON TRACK TO ENTER INSIDE THE PART. THE MACHINE CART HAS TESTING EQUIPMENT MOUNTED TO IT SUCH AS THE TANKS AND MANIFOLDS. THE PART WILL NEED TO BE ROTATED BY TURNING ROLLS. (PROVIDED BY CUSTOMER) THE SYSTEM WILL NEED TO HAVE ONE DRIVER TURNING ROLL ASSEMBLY THAT IS STATIONARY AND CONNECTED TO THE TEST HEAD ASSEMBLY SUPPORT BASE. THE TEST HEAD ASSEMBLY SUPPORT BASE HAS A MATING CUT OUT THAT THE HEAD ASSEMBLY MOUNT DRIVES INTO TO STEADY AND SUPPORT ITSELF WHILE THE HEAD ASSEMBLY CARRIAGE TRAVELS THROUGH THE PART DURING THE TESTING PROCESS. THE HEAD ASSEMBLY SUPPORT BASE ALSO HAS AN END STOP ROLLER TO PREVENT WALKING OF THE HOUSING. THE IDLER ROLLER ASSEMBLY IS ADJUSTABLE ALONG A TRACK FOR DIFFERENT LENGTHS. ALL OF THE LISTED EQUIPMENT WILL BE ON A SKID BASE TRACK THAT WILL EXTEND TO THE HEAD ASSEMBLY SUPPORT BASE. THE ELECTRICAL ENCLOSURE AND FLUID EQUIPMENT IS PLACED BESIDE THE MACHINE FOR ACCESSIBILITY.