Single Facility Auction to the Closure of Ajax Tocco
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
41
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
PARKER MAJESTIC | 1C |
[PARKER MAJESTIC MODEL 1C] I.D./O.D. CYLINDRICAL GRINDER. SWING OVER TABLE: 12". DISTANCE BETWEEN CENTERS: 20". TABLE WORKING SURFACE: 5" X 41". TABLE SWIVEL: 7 DEGREES. TABLE TRAVEL: 24". CROSS FEED TRAVEL: 3-1/2". CROSS FEED ADJUSTMENT: 4". GRINDING WHEEL DIAMETER: 12". HOLE THRU SPINDLE: 1-1/4". EQUIPPED WITH: SWING-AROUND INTERNAL GRINDING ATTACHMENT, COOLANT SYSTEM AND PUMP. PARKE MAJESTIC SPINDLE MODEL: 2300-3. 12" PLATTEN FIXTURE (MOUNTED ON MACHINE). 9" CHUCK.
|
🔒 Subscribe | |
|
|
MITSUBISHI | EA12 |
MITSUBISHI EA12 DIE-SINKER EDM - MITSUBISHI EA12 DIE-SINKER (RAM-TYPE) EDM TYPE: CNC SINKER (RAM) EDM MODEL: MISTUBISHI EA12 CONTROL: CNC MITSUBISHI M700 SERIES X TRAVEL: 15.75" Y TRAVEL: 11.81" Z TRAVEL: 11.81" U/V AXIS TRAVEL: N/A (FOR WIRE EDM ONLY) TABLE SIZE: 23.62" X 15.75" WORK TANK DIMENSIONS: 35.43" X 21.65" X 11.81" MAX WORKPIECE SIZE: 31.5" X 23.62" X 11.81" MAX WORKPIECE WEIGHT: 1700 LBS MAX ELECTRODE WEIGHT: 110 LBS TANK CAPACITY: 92 GALLONS FILTRATION: CARTRIDGE OR PAPER FILTRATION SYSTEM DEPENDING ON CONFIG FOOTPRINT: 95" X 91" X 96" MACHINE WEIGHT: 8400 LBS
|
🔒 Subscribe | |
|
|
MIDACO | AS5020SD |
MIDACO MODEL AS5020SD PALLET CHANGER SERIES 36A PNEUMATIC RECEIVER WITH AIR BLAST- 2,000 LBS. CAPACITY (1) SERIES S50 END LOAD SHUTTLE UNIT W/ AUTOMATIC DOOR AND INDICATOR LAMP
|
🔒 Subscribe | |
|
|
H FRAME 20 TON PRESS - CAPACITY 20 TON STROKE: 4.9" BED OPENING: 3.93"
|
🔒 Subscribe | |||
|
|
DONALDSON TORIT | VS 1500 |
(3) DONALDSON TORIT MODEL VS 1500 DUST COLLECTORS NOMINAL AIRFLOW: 1,525 CFM FILTER AREA: 177 SQ. FT POWER: 5 HP SPEED: 3,450 RPM INLET SIZE: 7" EQUIPPED WITH: INTEGRAL FAN HOUSING WITH MOTOR SHAKER MOTOR 1/8 HP, 115/60/1 TENV
|
🔒 Subscribe | |
|
|
ECONOLINE | RA-36-0 |
[2000] ECONOLINE RA-36-0 36" X 24" SANDBLASTER WITH DUST COLLECTOR. MAX. AIR FLOW: 25 CFM. WORKING WIDTH: 36". WORKING DEPTH: 24". WORKING HEIGHT: 23". TOP OPENING: 36" X 13". WINDOW HEIGHT: 12". WINDOW WIDTH: 24". EQUIPPED WITH: ECONOLINE 100 CFM DUST COLLECTOR, ECONOLINE 25 CFM BLAST GUN.
|
🔒 Subscribe | |
|
|
QUINCY | QT-10 |
QUINCY QT-10 10 HP BELT DRIVEN AIR COMPRESSOR POWER HP: 10 PRESSURE (PSIG): 175 CAPACITY (CFM): 35 AIR RECEIVER (GALLON) 120 TANK OUTLET: 1: EQUIPPED WITH: ZDH HIGH TEMP REFRIGERATED AIR DRYER
|
🔒 Subscribe | |
|
|
ECON-LINE | SIPHON FEED ABRASIVE BLAST CABINET |
ECON-LINE SIPHON FEED ABRASIVE BLAST CABINET 18" W X 16" D WORK AREA MAXIMUM AIR FLOW: 12 CFM MINIMUM AIR PRESSURE: 10 PSI TOP DOOR WIDTH: 12" TOP DOOR HEIGHT: 18" WINDOW WIDTH: 12" WINDOW HEIGHT: 6" EQUIPPED WITH: DUST COLLECTOR FOOT PEDAL NOZZLE
|
🔒 Subscribe | |
|
|
HARIG | 618 |
HARIG 618 6" X 18" SURFACE GRINDER W/ DUST COLLECTOR CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL - Z-AXIS: 6-3/4" GRINDING SPINDLE SPEED: 3,450 RPM GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" VERTICAL WORKING HEIGHT UNDER: 7" SPINDLE MOTOR: 1 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC CHUCK W/ VARIABLE CONTROL ACU-RITE DRO DONALDSON-TORIT MODEL VS550 DUST COLLECTOR WHEEL GUARD W/ SUCTION PORT MISC. SETUP TOOLING
|
🔒 Subscribe | |
|
|
CROWN | 40RCTT |
CROWN 40RCTT STAND UP ELECTRIC FORK TRUCK - CROWN 40RCTT STAND UP ELECTRIC FORK TRUCK MAST HEIGHT: 84" LIFT HEIGHT: 190" WEIGHT CAPACITY: 3,070 LBS. EQUIPPED WITH: SIDE SHIFT CAPABILITY 42" FORK LENGTH AMETEX ST-100 BATTERY CHARGER
|
🔒 Subscribe | |
|
|
2018 | HAAS | SERVO BAR 300 |
2018 HAAS SERVO BAR 300 BAR FEEDER BAR CAPACITY (DIAMETER): 0.25"-3.125" BAR CAPACITY (LEGTH): 60" BAR CAPACITY (QUANTITY) UP TO 30 BARS AT 1" DIAMETER EQUIPPED WITH: SET OF LINERS
|
🔒 Subscribe |
|
|
BRIDGEPORT | 1HP KNEE MILL |
[1HP KNEE MILL] BRIDGEPORT 1HP KNEE MILL 49" X 9 T-SLOT TABLE 1 HP ADJUSTABLE SPEED SPINDLE MOTOR EQUIPPED WITH: BRIDGEPORT TABLE VISE SREVO BRAND AUTOMATIC FEED AUC-RITE LINEAR SCALE WORK LIGHT COLLET RACK W/ COLLETS
|
🔒 Subscribe | |
|
|
CANTILEVER STEEL RACK - CANTILEVER STEEL RACK 3 SHELF STYLE- 2 FLAT & 1 BAR 53" LENGTH 20" DEPTH
|
🔒 Subscribe | |||
|
|
ATLAS COPCO | GA-7 |
ATLAS COPCO GA-7 COMPRESSOR (OIL-INJECTED ROTARY SCREW) MOTOR POWER: 10 HP CONTROLLER: ELEKTRONIKON 3 PH 400 V 60 HZ MAX WORKING PRESSURE: 145 PSI WEIGHT: 300 KG DIMS: 1272MM X 650MM X 1227MM
|
🔒 Subscribe | |
|
|
2018 | QUINCY | QGS-15 |
[2018] QUINCY QGS-15 15 HP AIR COMPRESSOR W/ DRYER 2,221 OPERATING HOURS POWER HP: 15 PRESSURE (PSIG): 145 CAPACITY (CFM): 54.9 AIR RECEIVER (GALLON) 120 EQUIPPED WITH: VANAIR REFRIGERATED AIR DRYER (MODEL RD40)
|
🔒 Subscribe |
|
|
SUNNEN | MBB-1660 |
SUNNEN MBB-1660 MANUAL STROKE HONING MACHINE I.D. RANGE :0.060" - 6.500" LENGTH RANGE MAXIMUM: 16" SPINDLE SPEEDS: 200 - 1,600 RPM MOTOR SPINDLE: 1/2 HP EQUIPPED WITH: ASSORTED MANDRELS MISC. HONING STONES MACHINE MANUAL
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
ELTEE PULSITRON TRM-21 SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE / DIELECTRIC: 20" X 15" X 12"; DIELECTRIC ABOUT 5 GALLON CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB POWER REQUIREMENTS: WIRED FOR 3 PH, 60 HZ, 208 V, 8 KVA FULL LOAD
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9004041A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE / DIELECTRIC: 20" X 15" X 12"; DIELECTRIC ABOUT 5 GALLON CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB POWER REQUIREMENTS: WIRED FOR 3 PH, 60 HZ, 208 V, 8 KVA FULL LOAD
|
🔒 Subscribe | |
|
|
GENSPARK AMERICA | CY-H32A |
GENSPARK AMERICA CY-H32A HIGH SPEED EDM HOLE DRILLER MAX CURRENT OUTPUT: 25 AMPS MAX WORKPIECE CAPACITY: 31.4" X 18.1" X 13.7" MAX WEIGHT: 396 LBS TABLE TRAVEL (X AND Y): 13.8" X 9.8" RAM (Z-AXIS) TRAVEL: TWO STAGES Z1: 13.3" Z2: 7.9" MAX ELECTRODE PIPE LENGTH: 15.7" DISTANCE FROM TABLE TO GUIDE HOLDER: 0.1" TO 13.7"
|
🔒 Subscribe | |
|
|
MITSUBISHI | FA10 |
MITSUBISHI FA10 WIRE EDM - MITSUBISHI FA10 WIRE EDM CONTROL: MITSUBISHI CNC CONTROL X TRAVEL: 13.8" Y TRAVEL: 9.8" Z TRAVEL: 8.7" U/V TRAVEL: +/-1.18" MAX WORKPIECE SIZE: 31.5" X 23.6" X 8.5" MAX WORKPIECE WEIGHT: 1100 LBS WIRE DIAMETER RANGE: 0.004" - 0.012" AUTOMATIC WIRE THREADING: YES MACHINE DIMS: 85" X 90" MACHINE WEIGHT: 6500 LBS
|
🔒 Subscribe | |
|
|
MITSUBISHI | FA10S |
MITSUBISHI FA10S (ADVANCE FAMILY) WIRE EDM CONTROL: MITSUBISHI W31FSA?2 ADVANCE X TRAVEL: 13.8" Y TRAVEL: 9.8" Z TRAVEL: 8.7" U/V TRAVEL: +/- 1.25" TABLE SIZE: 23.2" X 20.2" MAX SUBMERGED WORKPIECE SIZE: 31.5" X 23.6" X 8.5" MAX WORKPIECE WEIGHT: 1100 LBS WIRE DIAMETER RANGE: 0.004" - 0.012" EQUIPPED WITH: AUTO THREADING CHILLER PROGRESSIVE FLUSHING GLASS SCALES LINEAR GLASS SCALES ON X AND Y AXES, ENCODER FEEDBACK ON U/V/Z AXES MACHINE DIMS: 77" X 81" X 80" MACHINE WEIGHT: 5000 LBS
|
🔒 Subscribe | |
|
|
MITSUBISHI | FA-20 |
MITSUBISHI FA-20 WIRE-CUT EDM X TRAVEL: 19.7" Y TRAVEL: 13.8" Z TRAVEL: 11.8" U/V AXES: +/- 2.36" MAX WORKPIECE SIZE (IMMERSED): UP TO 41.3" X 31.5" X 11.8" MAX WORKPIECE WEIGHT: 3300 LBS CNC CONTROL: MITSUBISHI M700/M800 POWER SUPPLY: 220 V 3 PH 15 KVA MACHINE WEIGHT: 8500 LBS
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
[2000] ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9001021A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE: 20" X 15" X 12" 5 GALLON DIAELECTRIC CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB EQUIPPED WITH: O.S. WALKER ELECTRO MAGNET W/ VARIABLE CONTROL DIGITAL READ OUT POWER REQUIREMENTS: 240V/3PH/60HZ
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
ELTEE PULSITRON TRM-21 SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE: 20" X 15" X 12" 5 GALLON DIAELECTRIC CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB EQUIPPED WITH: O.S. WALKER ELECTRO MAGNET W/ VARIABLE CONTROL DIGITAL READ OUT POWER REQUIREMENTS: 240V/3PH/60HZ
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITRON EP-300CP (SCREEN NEEDS TO BE REPLACED) X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE: 20" X 15" X 12" 5 GALLON DIAELECTRIC CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB EQUIPPED WITH: O.S. WALKER ELECTRO MAGNET W/ VARIABLE CONTROL DIGITAL READ OUT POWER REQUIREMENTS: 240V/3PH/60HZ
|
🔒 Subscribe | |
|
|
ELTEE PULSITRON | TRM-21 |
ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9002120A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL: 8" Y TRAVEL: 6" Z TRAVEL: 10.5" WORK TABLE DIMENSIONS: 16" X 11" MAX TABLE LOAD: 300 LB WORK TANK SIZE: 20" X 15" X 12" 5 GALLON DIAELECTRIC CAPACITY MAX QUILL (ELECTRODE) LOAD: 100 LB W/ MAGNETIC TOOLING ABOUT 22 LB EQUIPPED WITH: O.S. WALKER ELECTRO MAGNET W/ VARIABLE CONTROL DIGITAL READ OUT POWER REQUIREMENTS: 240V/3PH/60HZ
|
🔒 Subscribe | |
|
|
HARIG | 612 |
HARIG 612 6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL: 6-3/4" VERTICAL WORKING HEIGHT (UNDER 7" WHEEL): 12" STANDARD GRINDING WHEEL: 7" X 1/2" X 1-1/4" ID ELEVATING HANDWHEEL GRADUATION: .0005" CROSS FEED HANDWHEEL GRADUATION: .001" SPINDLE SPEED: 3450 RPM 1 HP SPINDLE MOTOR EQUIPPED WITH: ACU-RITE DRO WORK LIGHT SPLASH GUARD FOR LEFT SIDE OF MACHINE
|
🔒 Subscribe | |
|
|
DONALDSON TORIT | VS550 |
DONALDSON TORIT MODEL VS550 DUST COLLECTOR 550 CFM 1 HP PRIMARY MOTOR (3600 RPM) 65 SQ. FOOT PRIMARY FILTER (4) 8" CONNECTION COLLAR LOCATIONS- (1) SETUP FOR 4" CONNECTION EQUIPPED WITH: PULL OUT DUST DRAWER CONTROL PANEL: 208/230/460 3PH/60HZ
|
🔒 Subscribe | |
|
|
HARIG | 618 |
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL - Z-AXIS: 6-3/4" GRINDING SPINDLE SPEED: 3,450 RPM GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" VERTICAL WORKING HEIGHT UNDER: 7" SPINDLE MOTOR: 1 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC CHUCK W/ VARIABLE CONTROL ACU-RITE DRO WHEEL GUARD W/ SUCTION PORT WORK LIGHT
|
🔒 Subscribe | |
|
|
HARIG | 612 |
HARIG 612 6" X 12" SURFACE GRINDER [EQUIPMENT TYPE & SPECS] SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL: 6-3/4" VERTICAL WORKING HEIGHT (UNDER 7" WHEEL): 12" STANDARD GRINDING WHEEL: 7" X 1/2" X 1-1/4" ID ELEVATING HANDWHEEL GRADUATION: .0005" CROSS FEED HANDWHEEL GRADUATION: .001" SPINDLE SPEED: 3450 RPM 1 HP SPINDLE MOTOR EQUIPPED WITH: HITACHI ELECTO MAGNETIC CHUCK W/ VARIABLE CONTROL ACU-RITE DRO WORK LIGHT WHEEL GUARD W/ SUCTION PORT MACHINE SETUP TOOL SPARE WHEEL GUARD
|
🔒 Subscribe | |
|
|
OKAMOTO | LINEAR 6.12B |
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAVEL - Z-AXIS: 8" GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" SPINDLE MOTOR: 2 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC W/ VARIABLE CONTROL ACU-RITE DRO WHEEL GUARD W/ SUCTION PORT WORK LIGHT COLD-AIR CHIP BLASTER MACHINE MANUALS
|
🔒 Subscribe | |
|
|
OKAMOTO | ACC6.18 DX3 |
OKAMOTO ACC6.18 DX3 SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20.8" CROSS TRAVEL - Z-AXIS: 6.9" MAXIMUM DISTANCE UNDER WHEEL: 11.7" GRINDING SPINDLE SPEED: 3,450 RPM GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1" GRINDING WHEEL HOLE DIAMETER: 1-1/4" SPINDLE MOTOR: 2 HP EQUIPPED WITH: O.S. WALKER ELECTRO-MAGNETIC CHUCK 17 GALLON COOLANT SYSTEM BUILT-IN CHUCK CONTROLLER MANUAL OVERHEAD WHEEL DRESSER VERTICAL POSITIONING DISPLAY VERTICAL MANUAL PULSE GENERATOR INCREMENTAL DOWNFEED WHEEL GUARD W/ SUCTION PORT
|
🔒 Subscribe | |
|
|
OKAMOTO | LINEAR 6.12B |
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAVEL - Z-AXIS: 8" GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" SPINDLE MOTOR: 2 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC W/ VARIABLE CONTROL ACU-RITE DRO WHEEL GUARD W/ SUCTION PORT WORK LIGHT
|
🔒 Subscribe | |
|
|
OKAMOTO | LINEAR 6.12B |
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAVEL - Z-AXIS: 8" GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" SPINDLE MOTOR: 2 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC W/ VARIABLE CONTROL ACU-RITE DRO WHEEL GUARD W/ SUCTION PORT WORK LIGHT MACHINE MANUAL ASSORTED MACHINE SETUP TOOLS
|
🔒 Subscribe | |
|
|
BURKE | B |
BURKE MODEL B MILLING MACHINE T-SLOT TABLE SIZE: 20" X 3-3/4" MOTOR HP: 3/4 ELECTRICAL: 230V/3PH EQUIPPED WITH: SWIVEL BASE SAFETY GUARD 6" - 4 JAW CHUCK
|
🔒 Subscribe | |
|
|
HARIG | SUPER 612 |
HARIG SUPER 612 6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL: 6-3/4" VERTICAL WORKING HEIGHT (UNDER 7" WHEEL): 12" STANDARD GRINDING WHEEL: 7" X 1/2" X 1-1/4" ID ELEVATING HANDWHEEL GRADUATION: .0005" CROSS FEED HANDWHEEL GRADUATION: .001" SPINDLE SPEED: 3450 RPM 1 HP SPINDLE MOTOR EQUIPPED WITH: WALKER FINE PULL MAGNET W/ VARIABLE CONTROL ANRAM MINI-WIZARD DRO WORK LIGHT WHEEL GUARD W/ DUST COLLECTION ATTACHMENT (4" DIAMETER HOSE) SPLASH GUARD FOR LEFT SIDE OF MACHINE
|
🔒 Subscribe | |
|
|
HARIG | 612 |
6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL: 6-3/4" VERTICAL WORKING HEIGHT (UNDER 7" WHEEL): 12" STANDARD GRINDING WHEEL: 7" X 1/2" X 1-1/4" ID ELEVATING HANDWHEEL GRADUATION: .0005" CROSS FEED HANDWHEEL GRADUATION: .001" SPINDLE SPEED: 3450 RPM 1 HP SPINDLE MOTOR EQUIPPED WITH: ACU-RITE DRO WORK LIGHT UNISON MODEL C6 CENTERLESS GRINDING FIXTURE SPLASH GUARD FOR LEFT SIDE OF MACHINE ALL MANUALS INCLUDED
|
🔒 Subscribe | |
|
|
HARIG | 618 |
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL - Z-AXIS: 6-3/4" GRINDING SPINDLE SPEED: 3,450 RPM GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" VERTICAL WORKING HEIGHT UNDER: 7" SPINDLE MOTOR: 1 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC ACU-RITE DRO
|
🔒 Subscribe | |
|
|
HARIG | 618 |
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL - Z-AXIS: 6-3/4" GRINDING SPINDLE SPEED: 3,450 RPM GRINDING WHEEL DIAMETER: 8" GRINDING WHEEL WIDTH: 1-1/4" GRINDING WHEEL HOLE DIAMETER: 1-1/4" VERTICAL WORKING HEIGHT UNDER: 7" SPINDLE MOTOR: 1 HP EQUIPPED WITH: O.S. WALKER ELECTRO MAGNETIC ACU-RITE DRO 2 GRINDING FIXTURES MANUALS
|
🔒 Subscribe | |
|
|
PRECISION GRANITE SURFACE PLATE 36" X 24" 36" LONG 24" WIDTH 4" THICKNESS 0-LEGDE STYLE TOOLROOM GRADE (B) FLATNESS SPECIFICATION EQUIPPED WITH: STEEL STAND
|
🔒 Subscribe | |||
|
|
48" X 36" PRECISION GRANITE SURFACE PLATE 48" LONG 36" WIDTH 7" THICKNESS 2-LEGDE STYLE TOOLROOM GRADE (B) FLATNESS SPECIFCATION EQUIPPED WITH: STEEL STAND
|
🔒 Subscribe |
PARKER MAJESTIC 1C
[PARKER MAJESTIC MODEL 1C] I.D./O.D. CYLINDRICAL GRINDER. SWING OVER TABLE: 12". DISTANCE BETWEEN CE...
MITSUBISHI EA12
MITSUBISHI EA12 DIE-SINKER EDM - MITSUBISHI EA12 DIE-SINKER (RAM-TYPE) EDM TYPE: CNC SINKER (RAM) ED...
MIDACO AS5020SD
MIDACO MODEL AS5020SD PALLET CHANGER SERIES 36A PNEUMATIC RECEIVER WITH AIR BLAST- 2,000 LBS. CAPACI...
H FRAME 20 TON PRESS - CAPACITY 20 TON STROKE: 4.9" BED OPENING: 3.93"
DONALDSON TORIT VS 1500
(3) DONALDSON TORIT MODEL VS 1500 DUST COLLECTORS NOMINAL AIRFLOW: 1,525 CFM FILTER AREA: 177 SQ. FT...
ECONOLINE RA-36-0
[2000] ECONOLINE RA-36-0 36" X 24" SANDBLASTER WITH DUST COLLECTOR. MAX. AIR FLOW: 25 CFM. WORKING W...
QUINCY QT-10
QUINCY QT-10 10 HP BELT DRIVEN AIR COMPRESSOR POWER HP: 10 PRESSURE (PSIG): 175 CAPACITY (CFM): 35 A...
ECON-LINE SIPHON FEED ABRASIVE BLAST CABINET
ECON-LINE SIPHON FEED ABRASIVE BLAST CABINET 18" W X 16" D WORK AREA MAXIMUM AIR FLOW: 12 CFM MINIMU...
HARIG 618
HARIG 618 6" X 18" SURFACE GRINDER W/ DUST COLLECTOR CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS...
CROWN 40RCTT
CROWN 40RCTT STAND UP ELECTRIC FORK TRUCK - CROWN 40RCTT STAND UP ELECTRIC FORK TRUCK MAST HEIGHT: 8...
2018 HAAS SERVO BAR 300
2018 HAAS SERVO BAR 300 BAR FEEDER BAR CAPACITY (DIAMETER): 0.25"-3.125" BAR CAPACITY (LEGTH): 60" B...
BRIDGEPORT 1HP KNEE MILL
[1HP KNEE MILL] BRIDGEPORT 1HP KNEE MILL 49" X 9 T-SLOT TABLE 1 HP ADJUSTABLE SPEED SPINDLE MOTOR EQ...
CANTILEVER STEEL RACK - CANTILEVER STEEL RACK 3 SHELF STYLE- 2 FLAT & 1 BAR 53" LENGTH 20" DEPTH
ATLAS COPCO GA-7
ATLAS COPCO GA-7 COMPRESSOR (OIL-INJECTED ROTARY SCREW) MOTOR POWER: 10 HP CONTROLLER: ELEKTRONIKON ...
2018 QUINCY QGS-15
[2018] QUINCY QGS-15 15 HP AIR COMPRESSOR W/ DRYER 2,221 OPERATING HOURS POWER HP: 15 PRESSURE (PSIG...
SUNNEN MBB-1660
SUNNEN MBB-1660 MANUAL STROKE HONING MACHINE I.D. RANGE :0.060" - 6.500" LENGTH RANGE MAXIMUM: 16" S...
ELTEE PULSITRON TRM-21
ELTEE PULSITRON TRM-21 SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITR...
ELTEE PULSITRON TRM-21
ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9004041A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL:...
GENSPARK AMERICA CY-H32A
GENSPARK AMERICA CY-H32A HIGH SPEED EDM HOLE DRILLER MAX CURRENT OUTPUT: 25 AMPS MAX WORKPIECE CAPAC...
MITSUBISHI FA10
MITSUBISHI FA10 WIRE EDM - MITSUBISHI FA10 WIRE EDM CONTROL: MITSUBISHI CNC CONTROL X TRAVEL: 13.8" ...
MITSUBISHI FA10S
MITSUBISHI FA10S (ADVANCE FAMILY) WIRE EDM CONTROL: MITSUBISHI W31FSA?2 ADVANCE X TRAVEL: 13.8" Y TR...
MITSUBISHI FA-20
MITSUBISHI FA-20 WIRE-CUT EDM X TRAVEL: 19.7" Y TRAVEL: 13.8" Z TRAVEL: 11.8" U/V AXES: +/- 2.36" MA...
ELTEE PULSITRON TRM-21
[2000] ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9001021A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X ...
ELTEE PULSITRON TRM-21
ELTEE PULSITRON TRM-21 SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITR...
ELTEE PULSITRON TRM-21
SINKER EDM - ELTEE PULSITRON TRM-21 SINKER EDM CONTROL PACKAGE: ELTEE PULSITRON EP-300CP (SCREEN NEE...
ELTEE PULSITRON TRM-21
ELTEE PULSITRON TRM-21 SINKER EDM SN: PC9002120A CONTROL PACKAGE: ELTEE PULSITRON EP-300CP X TRAVEL:...
HARIG 612
HARIG 612 6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL...
DONALDSON TORIT VS550
DONALDSON TORIT MODEL VS550 DUST COLLECTOR 550 CFM 1 HP PRIMARY MOTOR (3600 RPM) 65 SQ. FOOT PRIMARY...
HARIG 618
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL...
HARIG 612
HARIG 612 6" X 12" SURFACE GRINDER [EQUIPMENT TYPE & SPECS] SURFACE GRINDER CAPACITY: 6" X 12" LONG...
OKAMOTO LINEAR 6.12B
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAV...
OKAMOTO ACC6.18 DX3
OKAMOTO ACC6.18 DX3 SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20.8" CROSS TRA...
OKAMOTO LINEAR 6.12B
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAV...
OKAMOTO LINEAR 6.12B
OKAMOTO LINEAR 6.12B SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL - X-AXIS: 15" CROSS TRAV...
BURKE B
BURKE MODEL B MILLING MACHINE T-SLOT TABLE SIZE: 20" X 3-3/4" MOTOR HP: 3/4 ELECTRICAL: 230V/3PH EQU...
HARIG SUPER 612
HARIG SUPER 612 6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED ...
HARIG 612
6" X 12" SURFACE GRINDER CAPACITY: 6" X 12" LONGITUDINAL TRAVEL: 12-3/4" CROSS FEED TRAVEL: 6-3/4" V...
HARIG 618
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL...
HARIG 618
HARIG 618 6" X 18" SURFACE GRINDER CAPACITY: 6" X 18" LONGITUDINAL TRAVEL - X-AXIS: 20" CROSS TRAVEL...
PRECISION GRANITE SURFACE PLATE 36" X 24" 36" LONG 24" WIDTH 4" THICKNESS 0-LEGDE STYLE TOOLROOM GRA
48" X 36" PRECISION GRANITE SURFACE PLATE 48" LONG 36" WIDTH 7" THICKNESS 2-LEGDE STYLE TOOLROOM GRA