Complete Shop Closure of 295 Jeff North Branch
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
124
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
NICCO | 12" X 24" |
NICCO 12" X 24" SURFACE GRINDER MAGNETIC CHUCK 24" X 12", HEIGHT TABLE SURFACE TO SPINDLE CENTER 20", LONGITUDINAL TRAVEL 27", LONGITUDINAL TRAVEL SPEEDS 3.3 TO 82 FPM, CROSS TRAVEL 13", CROSS TRAVEL FEED AUTOMATIC .12" TO .8", INCREMENTAL DOWN FEED AUTOMATIC .00" TO .0016", GRINDING WHEEL STANDARD, SPINDLE SPEED 1700 RPM, TABLE CAPACITY 990 LBS., CONTROL COOLANT SYSTEM YES, SUCTION SYSTEM YES, SPINDLE MOTOR 5 HORSEPOWER S/N:K3691
|
🔒 Subscribe | |
|
|
GAP BED LATHE 3" 3 JAW CHUCK |
GAP BED LATHE 3" 3 JAW CHUCK - WITH 3" 3 JAW CHUCK
|
🔒 Subscribe | ||
|
|
MEUSER | 16" X 72" |
MEUSER 16" X 72" LATHE - SWING: 16" DISTANCE BETWEEN CENTERS: 72" SPINDLE SPEEDS: 40-1800 RPM THRU HOLE: 1-7/8" THREADING RANGE (ENGLISH): 1/2 - 152 TPI THREADING RANGE (METRIC): .5 - 92 MM EQUIPPED WITH: 3 JAW CHUCK, QUICK CHANGE TOOL POST, STEADY REST
|
🔒 Subscribe | |
|
|
INGERSOLL RAND |
INGERSOLL RAND AIR COMPRESSOR - WITH ELECTRICAL BOX, MANUAL, BOXER FILTERS
|
🔒 Subscribe | ||
|
|
GRISETTI | UNIVERSAL CYLINDRICAL GRINDER |
GRISETTI UNIVERSAL CYLINDRICAL GRINDER 10" X 40" UNIVERSAL SWIVELING WORKHEAD AND WHEELHEAD, SWING DOWN INTERNAL GRINDING SPINDLE, LIVE/DEAD WORKHEAD, TABLE SWIVEL WITH INDICATOR, WHEEL GUARD, COOLANT TANK AND PUMP, MAX SWING OVER TABLE 11.02", MAX GRINDING DIAMETER 10.02", MAX DISTANCE BETWEEN CENTERS 40", MAX GRINDING WHEEL DIAMETER 14", MAX GRINDING WHEEL WIDTH 2", GRINDING WHEEL HOLE DIAMETER 8", WHEELHEAD SWIVEL RANGE 30 DEGREE, WHEELHEAD HORSEPOWER 5 HP, WHEELHEAD SPEED (GRINDING WHEEL) 1,680 RPM, WORKHEAD SWIVEL RANGE 90 DEGREE, WORKHEAD HORSEPOWER 1.5 HP, WORKHEAD SPEED 24 - 240 RPM, TABLE FEED RATES (INFINITELY VARIABLE) 1 - 131 FPM, TABLE SWIVEL ANGLE TOWARD WHEELHEAD 9 DEGREE, TABLE SWIVEL ANGLE AWAY FROM WHEELHEAD 3 DEGREE, ELECTRICS 440/3/60, APPROXIMATE MACHINE DIMENSIONS 95" X 162", APPROXIMATE MACHINE HEIGHT 57", APPROXIMATE MACHINE WEIGHT 8,700 LBS S/N: 1290
|
🔒 Subscribe | |
|
|
KURT | ANGLOCK VISE - D688-25253 |
KURT ANGLOCK VISE - D688-25253
|
🔒 Subscribe | |
|
|
1983 | KENT | KGS-250AHD |
1983 KENT KGS-250AHD HYDRAULIC SURFACE GRINDERS - NEAUTO IDF, 3X AUTO FEEDS3-1, EQUIPPED WITH: AUTOMATIC INCREMENTAL DOWN FEED (VARIABLE 10 STEPS) POWER RAPID WHEELHEAD POSITIONING HYDRAULIC TABLE TRAVERSE POWER CROSSFEED 8" X 18" FINE-POLE ELECTRO-MAGNETIC CHUCK "KANETEC" VARIABLE HOLD NEUTROFIER CONTROL DUST COLLECTOR & COOLANT SYSTEM OVER-THE-WHEEL DRESSER MEEHANITE CASTING EXTERNAL HYDRAULIC SYSTEM MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS, 71" X 55"W X 70"H
|
🔒 Subscribe |
|
|
MUNKTELLS | MAF.1 |
MUNKTELLS MAF.1 ECCENTRIC PRESS WITH (2) ATTACHMENTS
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT-800A-004155
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT800A-004233
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT800A-003443
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE
|
🔒 Subscribe | |
|
|
12" 3 JAW CHUCK
|
🔒 Subscribe | |||
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: 11579
|
🔒 Subscribe | |
|
|
HAAS | INDEXER TAILSTOCK |
HAAS INDEXER TAILSTOCK 6-1/2" - WITH (3) SANDVIK COROMANT R265.2-200M 8" INDEXABLE FACE MILL CUTTER CARBIDE INSERT
|
🔒 Subscribe | |
|
|
GRANDER |
GRANDER - (DOES NOT WORK)
|
🔒 Subscribe | ||
|
|
BISON |
3 JAW BISON, HORIZONTAL, VERTICAL INDEXING FIXTURE
|
🔒 Subscribe | ||
|
|
POWERMATIC | 30B |
POWERMATIC 30B COMBINATION BELT AND DISC SANDER - 6" WIDE BELT WITH 12" DIAMETER DISC COMBINATION SANDER IN NICE CONDITION 6" WIDE BELT WITH 11" X 6" WORK AREA, 12" DIAMETER DISC WITH 17" TABLE
|
🔒 Subscribe | |
|
|
DELTA |
DELTA CARBIDE TOOL GRINDER WITH PEDESTAL - 1/2HP, 115V
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED TOOLING - WITH INSERT, DRILL BITS, INSERT TOOLING, SHELF FULL OF CONTENT
|
🔒 Subscribe | |||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0014
|
🔒 Subscribe | ||
|
|
YUASA | 550-110 |
YUASA 550-110 10"HORIZONTAL PRECISION ROTARY TABLE
|
🔒 Subscribe | |
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0016
|
🔒 Subscribe | ||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0015
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED ENDMILL DRILL BITS - 1/4"-2"
|
🔒 Subscribe | |||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0012
|
🔒 Subscribe | ||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA004
|
🔒 Subscribe | ||
|
|
2 DOOR METAL CABINET - WITH ASSORTED LATHE TOOLING
|
🔒 Subscribe | |||
|
|
LOT OF (3) ASSORTED COLLECTS
|
🔒 Subscribe | |||
|
|
POWERMATIC |
POWERMATIC GRINDERS- BUFFERS - 1.5 HP, 208-230 V, 3 PH, 4.4 AMPS, 50/60 CYCLE, 1500/1800 RPM
|
🔒 Subscribe | ||
|
|
BJP |
ELECTROMAGNETIC CHUCK TYPE BJP - WILL NEED NEW PLUG FOR THE END, 110 V, 2 AMP
|
🔒 Subscribe | ||
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ATTACHMENTS
|
🔒 Subscribe | ||
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ATTACHMENTS
|
🔒 Subscribe | ||
|
|
CAT 40 |
CAT 40 TOOL HOLDER WITH INSERTS
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED TOOLING
|
🔒 Subscribe | |||
|
|
THEMAC | 3963 |
THEMAC 3963 10,000 RPM PULLY MOTOR USED - 115 V, 4.5 AMP, 4.95 WATTS, 10,000 RPM
|
🔒 Subscribe | |
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25
|
🔒 Subscribe | ||
|
|
KURT | ANGLOCK VISE - D675-77828 |
KURT ANGLOCK VISE - D675-77828
|
🔒 Subscribe | |
|
|
CAT | 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | |
|
|
LOT OF (5) TOOLING INSERTS
|
🔒 Subscribe | |||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
LOT OF (2) 12" 3 JAW CHUCK
|
🔒 Subscribe | |||
|
|
KENNAMETAL |
KENNAMETAL INDEXABLE THREADING TOOLHOLDER
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT8COA-000162
|
🔒 Subscribe | |
|
|
KANT-TWIST |
KANT-TWIST STAINLESS STEEL CLAMPS
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
(2) PIN GAUGE SETS
|
🔒 Subscribe | |||
|
|
(2) PIN GAUGE SETS
|
🔒 Subscribe |
NICCO 12" X 24"
METALWORKING & FABRICATION EQUIPMENT
NICCO 12" X 24" SURFACE GRINDER MAGNETIC CHUCK 24" X 12", HEIGHT TABLE SURFACE TO SPINDLE CENTER 20...
Hammer Price:
🔒
GAP BED LATHE 3" 3 JAW CHUCK
METALWORKING & FABRICATION EQUIPMENT
GAP BED LATHE 3" 3 JAW CHUCK - WITH 3" 3 JAW CHUCK...
Hammer Price:
🔒
MEUSER 16" X 72"
METALWORKING & FABRICATION EQUIPMENT
MEUSER 16" X 72" LATHE - SWING: 16" DISTANCE BETWEEN CENTERS: 72" SPINDLE SPEEDS: 40-1800 RPM THRU H...
Hammer Price:
🔒
INGERSOLL RAND
AIR COMPRESSORS
INGERSOLL RAND AIR COMPRESSOR - WITH ELECTRICAL BOX, MANUAL, BOXER FILTERS...
Hammer Price:
🔒
GRISETTI UNIVERSAL CYLINDRICAL GRINDER
METALWORKING & FABRICATION EQUIPMENT
GRISETTI UNIVERSAL CYLINDRICAL GRINDER 10" X 40" UNIVERSAL SWIVELING WORKHEAD AND WHEELHEAD, SWING D...
Hammer Price:
🔒
KURT ANGLOCK VISE - D688-25253
METALWORKING & FABRICATION EQUIPMENT
KURT ANGLOCK VISE - D688-25253...
Hammer Price:
🔒
1983 KENT KGS-250AHD
METALWORKING & FABRICATION EQUIPMENT
1983 KENT KGS-250AHD HYDRAULIC SURFACE GRINDERS - NEAUTO IDF, 3X AUTO FEEDS3-1, EQUIPPED WITH: AUTOM...
Hammer Price:
🔒
MUNKTELLS MAF.1
PRESSES & FORMING
MUNKTELLS MAF.1 ECCENTRIC PRESS WITH (2) ATTACHMENTS...
Hammer Price:
🔒
KURT II
METALWORKING & FABRICATION EQUIPMENT
KURT II VISE - WITH HANDLE S/N: PT-800A-004155...
Hammer Price:
🔒
KURT II
METALWORKING & FABRICATION EQUIPMENT
KURT II VISE - WITH HANDLE S/N: PT800A-004233...
Hammer Price:
🔒
KURT II
METALWORKING & FABRICATION EQUIPMENT
KURT II VISE - WITH HANDLE S/N: PT800A-003443...
Hammer Price:
🔒
KURT II
METALWORKING & FABRICATION EQUIPMENT
KURT II VISE - WITH HANDLE S/N: 11579...
Hammer Price:
🔒
HAAS INDEXER TAILSTOCK
CNC MACHINE CENTERS
HAAS INDEXER TAILSTOCK 6-1/2" - WITH (3) SANDVIK COROMANT R265.2-200M 8" INDEXABLE FACE MILL CUTTER ...
Hammer Price:
🔒
POWERMATIC 30B
WOODWORKING EQUIPMENT
POWERMATIC 30B COMBINATION BELT AND DISC SANDER - 6" WIDE BELT WITH 12" DIAMETER DISC COMBINATION SA...
Hammer Price:
🔒
DELTA
METALWORKING & FABRICATION EQUIPMENT
DELTA CARBIDE TOOL GRINDER WITH PEDESTAL - 1/2HP, 115V...
Hammer Price:
🔒
MISC
LOT OF ASSORTED TOOLING - WITH INSERT, DRILL BITS, INSERT TOOLING, SHELF FULL OF CONTENT...
Hammer Price:
🔒
BODINE ELECTRIC COMPANY
MISC
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0014...
Hammer Price:
🔒
YUASA 550-110
CNC MACHINE CENTERS
YUASA 550-110 10"HORIZONTAL PRECISION ROTARY TABLE...
Hammer Price:
🔒
BODINE ELECTRIC COMPANY
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0016...
Hammer Price:
🔒
BODINE ELECTRIC COMPANY
MISC
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0015...
Hammer Price:
🔒
BODINE ELECTRIC COMPANY
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0012...
Hammer Price:
🔒
BODINE ELECTRIC COMPANY
MISC
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA004...
Hammer Price:
🔒
POWERMATIC
POWER AND HAND TOOLS
POWERMATIC GRINDERS- BUFFERS - 1.5 HP, 208-230 V, 3 PH, 4.4 AMPS, 50/60 CYCLE, 1500/1800 RPM...
Hammer Price:
🔒
BJP
METALWORKING & FABRICATION EQUIPMENT
ELECTROMAGNETIC CHUCK TYPE BJP - WILL NEED NEW PLUG FOR THE END, 110 V, 2 AMP...
Hammer Price:
🔒
HABEGGER
METALWORKING & FABRICATION EQUIPMENT
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ...
Hammer Price:
🔒
HABEGGER
METALWORKING & FABRICATION EQUIPMENT
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ...
Hammer Price:
🔒
THEMAC 3963
MISC
THEMAC 3963 10,000 RPM PULLY MOTOR USED - 115 V, 4.5 AMP, 4.95 WATTS, 10,000 RPM...
Hammer Price:
🔒
HABEGGER
METALWORKING & FABRICATION EQUIPMENT
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25...
Hammer Price:
🔒
KURT ANGLOCK VISE - D675-77828
METALWORKING & FABRICATION EQUIPMENT
KURT ANGLOCK VISE - D675-77828...
Hammer Price:
🔒