Complete Shop Closure of 295 Jeff North Branch
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
124
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
NICCO | 12" X 24" |
NICCO 12" X 24" SURFACE GRINDER MAGNETIC CHUCK 24" X 12", HEIGHT TABLE SURFACE TO SPINDLE CENTER 20", LONGITUDINAL TRAVEL 27", LONGITUDINAL TRAVEL SPEEDS 3.3 TO 82 FPM, CROSS TRAVEL 13", CROSS TRAVEL FEED AUTOMATIC .12" TO .8", INCREMENTAL DOWN FEED AUTOMATIC .00" TO .0016", GRINDING WHEEL STANDARD, SPINDLE SPEED 1700 RPM, TABLE CAPACITY 990 LBS., CONTROL COOLANT SYSTEM YES, SUCTION SYSTEM YES, SPINDLE MOTOR 5 HORSEPOWER S/N:K3691
|
🔒 Subscribe | |
|
|
GAP BED LATHE 3" 3 JAW CHUCK |
GAP BED LATHE 3" 3 JAW CHUCK - WITH 3" 3 JAW CHUCK
|
🔒 Subscribe | ||
|
|
MEUSER | 16" X 72" |
MEUSER 16" X 72" LATHE - SWING: 16" DISTANCE BETWEEN CENTERS: 72" SPINDLE SPEEDS: 40-1800 RPM THRU HOLE: 1-7/8" THREADING RANGE (ENGLISH): 1/2 - 152 TPI THREADING RANGE (METRIC): .5 - 92 MM EQUIPPED WITH: 3 JAW CHUCK, QUICK CHANGE TOOL POST, STEADY REST
|
🔒 Subscribe | |
|
|
INGERSOLL RAND |
INGERSOLL RAND AIR COMPRESSOR - WITH ELECTRICAL BOX, MANUAL, BOXER FILTERS
|
🔒 Subscribe | ||
|
|
GRISETTI | UNIVERSAL CYLINDRICAL GRINDER |
GRISETTI UNIVERSAL CYLINDRICAL GRINDER 10" X 40" UNIVERSAL SWIVELING WORKHEAD AND WHEELHEAD, SWING DOWN INTERNAL GRINDING SPINDLE, LIVE/DEAD WORKHEAD, TABLE SWIVEL WITH INDICATOR, WHEEL GUARD, COOLANT TANK AND PUMP, MAX SWING OVER TABLE 11.02", MAX GRINDING DIAMETER 10.02", MAX DISTANCE BETWEEN CENTERS 40", MAX GRINDING WHEEL DIAMETER 14", MAX GRINDING WHEEL WIDTH 2", GRINDING WHEEL HOLE DIAMETER 8", WHEELHEAD SWIVEL RANGE 30 DEGREE, WHEELHEAD HORSEPOWER 5 HP, WHEELHEAD SPEED (GRINDING WHEEL) 1,680 RPM, WORKHEAD SWIVEL RANGE 90 DEGREE, WORKHEAD HORSEPOWER 1.5 HP, WORKHEAD SPEED 24 - 240 RPM, TABLE FEED RATES (INFINITELY VARIABLE) 1 - 131 FPM, TABLE SWIVEL ANGLE TOWARD WHEELHEAD 9 DEGREE, TABLE SWIVEL ANGLE AWAY FROM WHEELHEAD 3 DEGREE, ELECTRICS 440/3/60, APPROXIMATE MACHINE DIMENSIONS 95" X 162", APPROXIMATE MACHINE HEIGHT 57", APPROXIMATE MACHINE WEIGHT 8,700 LBS S/N: 1290
|
🔒 Subscribe | |
|
|
KURT | ANGLOCK VISE - D688-25253 |
KURT ANGLOCK VISE - D688-25253
|
🔒 Subscribe | |
|
|
1983 | KENT | KGS-250AHD |
1983 KENT KGS-250AHD HYDRAULIC SURFACE GRINDERS - NEAUTO IDF, 3X AUTO FEEDS3-1, EQUIPPED WITH: AUTOMATIC INCREMENTAL DOWN FEED (VARIABLE 10 STEPS) POWER RAPID WHEELHEAD POSITIONING HYDRAULIC TABLE TRAVERSE POWER CROSSFEED 8" X 18" FINE-POLE ELECTRO-MAGNETIC CHUCK "KANETEC" VARIABLE HOLD NEUTROFIER CONTROL DUST COLLECTOR & COOLANT SYSTEM OVER-THE-WHEEL DRESSER MEEHANITE CASTING EXTERNAL HYDRAULIC SYSTEM MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS, 71" X 55"W X 70"H
|
🔒 Subscribe |
|
|
MUNKTELLS | MAF.1 |
MUNKTELLS MAF.1 ECCENTRIC PRESS WITH (2) ATTACHMENTS
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT-800A-004155
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT800A-004233
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT800A-003443
|
🔒 Subscribe | |
|
|
KURT | II |
KURT II VISE
|
🔒 Subscribe | |
|
|
12" 3 JAW CHUCK
|
🔒 Subscribe | |||
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: 11579
|
🔒 Subscribe | |
|
|
HAAS | INDEXER TAILSTOCK |
HAAS INDEXER TAILSTOCK 6-1/2" - WITH (3) SANDVIK COROMANT R265.2-200M 8" INDEXABLE FACE MILL CUTTER CARBIDE INSERT
|
🔒 Subscribe | |
|
|
GRANDER |
GRANDER - (DOES NOT WORK)
|
🔒 Subscribe | ||
|
|
BISON |
3 JAW BISON, HORIZONTAL, VERTICAL INDEXING FIXTURE
|
🔒 Subscribe | ||
|
|
POWERMATIC | 30B |
POWERMATIC 30B COMBINATION BELT AND DISC SANDER - 6" WIDE BELT WITH 12" DIAMETER DISC COMBINATION SANDER IN NICE CONDITION 6" WIDE BELT WITH 11" X 6" WORK AREA, 12" DIAMETER DISC WITH 17" TABLE
|
🔒 Subscribe | |
|
|
DELTA |
DELTA CARBIDE TOOL GRINDER WITH PEDESTAL - 1/2HP, 115V
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED TOOLING - WITH INSERT, DRILL BITS, INSERT TOOLING, SHELF FULL OF CONTENT
|
🔒 Subscribe | |||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0014
|
🔒 Subscribe | ||
|
|
YUASA | 550-110 |
YUASA 550-110 10"HORIZONTAL PRECISION ROTARY TABLE
|
🔒 Subscribe | |
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0016
|
🔒 Subscribe | ||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0015
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED ENDMILL DRILL BITS - 1/4"-2"
|
🔒 Subscribe | |||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0012
|
🔒 Subscribe | ||
|
|
BODINE ELECTRIC COMPANY |
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA004
|
🔒 Subscribe | ||
|
|
2 DOOR METAL CABINET - WITH ASSORTED LATHE TOOLING
|
🔒 Subscribe | |||
|
|
LOT OF (3) ASSORTED COLLECTS
|
🔒 Subscribe | |||
|
|
POWERMATIC |
POWERMATIC GRINDERS- BUFFERS - 1.5 HP, 208-230 V, 3 PH, 4.4 AMPS, 50/60 CYCLE, 1500/1800 RPM
|
🔒 Subscribe | ||
|
|
BJP |
ELECTROMAGNETIC CHUCK TYPE BJP - WILL NEED NEW PLUG FOR THE END, 110 V, 2 AMP
|
🔒 Subscribe | ||
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ATTACHMENTS
|
🔒 Subscribe | ||
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ATTACHMENTS
|
🔒 Subscribe | ||
|
|
CAT 40 |
CAT 40 TOOL HOLDER WITH INSERTS
|
🔒 Subscribe | ||
|
|
LOT OF ASSORTED TOOLING
|
🔒 Subscribe | |||
|
|
THEMAC | 3963 |
THEMAC 3963 10,000 RPM PULLY MOTOR USED - 115 V, 4.5 AMP, 4.95 WATTS, 10,000 RPM
|
🔒 Subscribe | |
|
|
HABEGGER |
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25
|
🔒 Subscribe | ||
|
|
KURT | ANGLOCK VISE - D675-77828 |
KURT ANGLOCK VISE - D675-77828
|
🔒 Subscribe | |
|
|
CAT | 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | |
|
|
LOT OF (5) TOOLING INSERTS
|
🔒 Subscribe | |||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
LOT OF (2) 12" 3 JAW CHUCK
|
🔒 Subscribe | |||
|
|
KENNAMETAL |
KENNAMETAL INDEXABLE THREADING TOOLHOLDER
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
KURT | II |
KURT II VISE - WITH HANDLE S/N: PT8COA-000162
|
🔒 Subscribe | |
|
|
KANT-TWIST |
KANT-TWIST STAINLESS STEEL CLAMPS
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
CAT 50 |
CAT 50 TOOL HOLDER - WITH INSERTS
|
🔒 Subscribe | ||
|
|
(2) PIN GAUGE SETS
|
🔒 Subscribe | |||
|
|
(2) PIN GAUGE SETS
|
🔒 Subscribe |
NICCO 12" X 24"
NICCO 12" X 24" SURFACE GRINDER MAGNETIC CHUCK 24" X 12", HEIGHT TABLE SURFACE TO SPINDLE CENTER 20...
GAP BED LATHE 3" 3 JAW CHUCK
GAP BED LATHE 3" 3 JAW CHUCK - WITH 3" 3 JAW CHUCK...
MEUSER 16" X 72"
MEUSER 16" X 72" LATHE - SWING: 16" DISTANCE BETWEEN CENTERS: 72" SPINDLE SPEEDS: 40-1800 RPM THRU H...
INGERSOLL RAND
INGERSOLL RAND AIR COMPRESSOR - WITH ELECTRICAL BOX, MANUAL, BOXER FILTERS...
GRISETTI UNIVERSAL CYLINDRICAL GRINDER
GRISETTI UNIVERSAL CYLINDRICAL GRINDER 10" X 40" UNIVERSAL SWIVELING WORKHEAD AND WHEELHEAD, SWING D...
KURT ANGLOCK VISE - D688-25253
KURT ANGLOCK VISE - D688-25253...
1983 KENT KGS-250AHD
1983 KENT KGS-250AHD HYDRAULIC SURFACE GRINDERS - NEAUTO IDF, 3X AUTO FEEDS3-1, EQUIPPED WITH: AUTOM...
MUNKTELLS MAF.1
MUNKTELLS MAF.1 ECCENTRIC PRESS WITH (2) ATTACHMENTS...
KURT II
KURT II VISE - WITH HANDLE S/N: PT-800A-004155...
KURT II
KURT II VISE - WITH HANDLE S/N: PT800A-004233...
KURT II
KURT II VISE - WITH HANDLE S/N: PT800A-003443...
KURT II
KURT II VISE...
12" 3 JAW CHUCK
KURT II
KURT II VISE - WITH HANDLE S/N: 11579...
HAAS INDEXER TAILSTOCK
HAAS INDEXER TAILSTOCK 6-1/2" - WITH (3) SANDVIK COROMANT R265.2-200M 8" INDEXABLE FACE MILL CUTTER ...
GRANDER
GRANDER - (DOES NOT WORK)...
BISON
3 JAW BISON, HORIZONTAL, VERTICAL INDEXING FIXTURE...
POWERMATIC 30B
POWERMATIC 30B COMBINATION BELT AND DISC SANDER - 6" WIDE BELT WITH 12" DIAMETER DISC COMBINATION SA...
DELTA
DELTA CARBIDE TOOL GRINDER WITH PEDESTAL - 1/2HP, 115V...
LOT OF ASSORTED TOOLING - WITH INSERT, DRILL BITS, INSERT TOOLING, SHELF FULL OF CONTENT
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0014...
YUASA 550-110
YUASA 550-110 10"HORIZONTAL PRECISION ROTARY TABLE...
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0016...
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0015...
LOT OF ASSORTED ENDMILL DRILL BITS - 1/4"-2"
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA0012...
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY GEARMOTOR WITH SCR SPEED CONTROL S/N: 4118AXEA004...
2 DOOR METAL CABINET - WITH ASSORTED LATHE TOOLING
LOT OF (3) ASSORTED COLLECTS
POWERMATIC
POWERMATIC GRINDERS- BUFFERS - 1.5 HP, 208-230 V, 3 PH, 4.4 AMPS, 50/60 CYCLE, 1500/1800 RPM...
BJP
ELECTROMAGNETIC CHUCK TYPE BJP - WILL NEED NEW PLUG FOR THE END, 110 V, 2 AMP...
HABEGGER
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ...
HABEGGER
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25 CHUCK, ASSORTED ...
CAT 40
CAT 40 TOOL HOLDER WITH INSERTS...
LOT OF ASSORTED TOOLING
THEMAC 3963
THEMAC 3963 10,000 RPM PULLY MOTOR USED - 115 V, 4.5 AMP, 4.95 WATTS, 10,000 RPM...
HABEGGER
HABEGGER DISTANCE BETWEEN CENTERS 420 MM CENTER HEIGHT 102 MM COLLET ATTACHMENT W25...
KURT ANGLOCK VISE - D675-77828
KURT ANGLOCK VISE - D675-77828...
CAT 50
CAT 50 TOOL HOLDER - WITH INSERTS...
LOT OF (5) TOOLING INSERTS
CAT 50
CAT 50 TOOL HOLDER - WITH INSERTS...
LOT OF (2) 12" 3 JAW CHUCK
KENNAMETAL
KENNAMETAL INDEXABLE THREADING TOOLHOLDER...
CAT 50
CAT 50 TOOL HOLDER - WITH INSERTS...
KURT II
KURT II VISE - WITH HANDLE S/N: PT8COA-000162...
KANT-TWIST
KANT-TWIST STAINLESS STEEL CLAMPS...
CAT 50
CAT 50 TOOL HOLDER - WITH INSERTS...
CAT 50
CAT 50 TOOL HOLDER - WITH INSERTS...
(2) PIN GAUGE SETS
(2) PIN GAUGE SETS