YEAR END 2023 MULTILOCATION AUCTION SALE

LOVESHAW LDU/2 CASE TAPER DRIVEN BY A 1/3 HP, 110 VOLTS, 1 PHASE, 60 HZ MOTOR. MISSING TAPE HEADS.

MICROFLUIDICS M110P MICROFLUIDIZER. MODEL: 110P, DIAMOND INTERACTION CHAMBER: G10Z 30,000 PSI, EST DIMS: 24X36X20. S/N: 2009038 THE TABLE/CART IS NOT INCLUDED WITH THE MACHINE.

BEL 150 TOP AND BOTTOM BOX TAPER / SEALER VOLTAGE 120 V AC, SINGLE PHASE, 60 HZ, ADJUSTABLE UNIT DRIVE BELT, WIDTH SIZE IS ADJUSTABLE, BELT LENGTH 32", DIMENSIONS 46" L X 36" W X 71" H, SYSTEM RATED FOR UP TO 30 BOXES PER MINUTE, THE BEL 150 IS A HIGH QUALITY, SEMI-AUTOMATIC, TOP AND BOTTOM PRESSURE SENSITIVE TAPE CASE SEALER. FEATURES A HEAVY DUTY ANODIZE C-BEAM ALUMINUM WELDED FRAME FOR EXTREME ROBUSTNESS AND SOUND STRUCTURE, ALONG WITH WEXXAR BEL'S UNIT DRIVE SYSTEM THE DRIVE BELTS ARE ALWAYS SYNCHRONIZED, ELIMINATING ANY POTENTIAL FOR CASE SKEW AND ENSURING A SQUARE SEAL EVEN AFTER EXTENDED USE

2003 QUADRELL Q32RZ170 LABEL APPLICATOR FOR PALLETIZED SKIDS WITH ALLEN BRADLEY PANELVIEW 300 MICRO-CONTROLLER, MOUNTED ON SS "T" STAND ON CASTERS. MISSING CONTROL BOARD INSIDE ALLEN BRADLEY PANEL. 120/60/1, OAD'S 45" L X 43" W X 76" H. ACCORDING TO QUADRELL THE AB PANEL WAS USED FOR BAR CODES. S/N: 50114-01

APROX. 500 GAL. S/S DIMPLE JACKET TANK - NOT SURE WHAT THE TANK WAS LAST USED FOR. TANK IS RATED AT 50 PSI @ 300 DEGREE F.

S/S SANITARY VIBRATORY SCALE FEEDER, APROX. 16" W X 112" L. LAST USED IN FOOD INDUSTRY. UNIT REMOVED FROM PRODUCTION FLOOR FROM KOCH FOODS, NOVE. 2021. LAST USED TO FEED A ROTARY SCALE DOING CHICKEN BREASTS. DIMPLE PAN MEASURES 112" L X 16" W X 8" DEEP, INFEED HEIGHT 36", DISCHARGE HEIGHT 28", HEIGHTS ARE ADJUSTABLE, THERE IS NO MFG. TAG BUT ALL EQUIPMENT IN THE PLANT WAS HEAT AND CONTROL, OVERALL DIMENSIONS APROX. 115" L X 28" W X 37" H

SPANTECH APROX. 10" W X 199" L S-TURN S/S INTRALOX BELT CONVEYOR WITH .5 HP S/S DRIVE MOTOR, 208-230/460 V MOTOR, 199" L PORTABLE ON CASTERS. UNIT LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION. THIS UNIT WILL NEED TO SHIP VIA FLATBED DUE TO THE LENGTH

KEENLINE 10 INCH WIDE S/S SANITARY INCLINE INTRALOX BELT CONVEYOR S/N: 17677SAR - VARIABLE SPEED WITH 90 DEG EXIT, LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION, S/S SIDE RAILS, 90 DEGREE TURN AT THE EXIT, CONVEYOR TOTAL OVERALL LENGTH IS 202 INCHES, UNIT HAS AN ALLEN BRADLEY POWERFLEX SPEED CONTROLLER, .5, HP DRIVE 230/460 VOLT 1725 RPM -- THIS CONVEYOR HAS 2 CONTROL BOXES AS IT MUST OF BEEN IN CONJUNCTION WITH OTHER PIECES OF EQUIPMENT. AS YOU CAN SEE FROM THE PHOTOS OF THE CONTROL BOX ALONG WITH THE SPEED CONTROLLER IS OTHER ELECTRONICS. WE CAN LEAVE THIS ON THE UNIT OR REMOVE IT., CURRENT INFEED HEIGHT IS 24 INCHES, DISCHARGE HEIGHT IS 58 INCHES, THESE HEIGHTS CAN BE ADJUSTED SOMEWHAT WITH THE ADJUSTABLE FOOT PADS, THIS SYSTEM WILL NEED TO SHIP VIA FLATBED DUE TO THE SIZE

KEENLINE S/S SANITARY 90 DEG INTRALOX BELT CONVEYOR, 18 INCH WIDE BELT, 94 INCHES OVERALL LENGTH, 3/4 HP BALDOR DRIVE 3/60/208-230/460 VOLT, CURRENT INFEED HEIGHT IS 12 INCHES (THIS IS ADJUSTABLE), CURRENT DISCHARGE HEIGHT IS 27 INCHES ( THIS IS ADJUSTABLE), UNIT IS PORTABLE ON LOCKING CASTERS S/N: 20211SAR

S/S SANITARY VIBRATORY SCALE FEEDER, APROX. 24" W X 132" L. LAST USED IN FOOD INDUSTRY. UNIT REMOVED FROM PRODUCTION FR KOCH FOODS NOV. 2021, LAST USED TO FEED A ROTARY SCALE DOING CHICKEN BREASTS, DIMPLE PAN MEASURES 132" L X 24" W X 10" DEEP, INFEED HEIGHT 36", DISCHARGE HEIGHT 32", HEIGHTS ARE ADJUSTABLE.

APROX. 15" DUAL INTRALOX S/S SANITARY FOOD GRADE PACK-OFF CONVEYOR -- UNIT LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION. TOP INTRALOX BELT IS 15" W X 40" L, BOTTOM INTRALOX BELT IS 15" W X 44" L, INFEED HEIGHT FOR BOTTOM BELT IS 29", INFEED HEIGHT FOR TOP BELT IS 47". THESE HEIGHTS ARE ADJSUTABLE WITH ADJUSTABLE LEGS TO VARY HEIGHTS. ALL S/S SANITARY FOOD GRADE UNIT, PACK-OFF TABLES ON BOTH SIDES MEASURE 14" W X 36" L WITH EMERGENCY STOP, .5 HP DRIVE, 3/60/230-460 V. VIDEO SYSTEM UNDER POWER UPON REQUEST

MARCHANT SCHMIDT S/S INCLINE CLEATED CONVEYOR, APROX. 12" W X 130" L, UNIT LAST USED THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION WITH CLEATED WHITE INTRALOX BELT CONVEYOR, 12 INCH WIDE BELT WITH 2 INCH HIGH CLEATS SPACED 10 TO 24 INCHES APART, 130 INCH LONG BELT LENGTH, INFEED HEIGHT IS 17 INCHES AND DISCHARGES AT 55 INCHES, HEIGHT FOR BOTH INFEED AND DISCHARGE IS SOMEWHAT ADJUSTABLE WITH THE LEGS, UNIT IS PORTABLE ON CASTERS, 3/4 DAYTON DRIVE MOTOR 115 VOLT VERY NICE, OVERALL DIMENSIONS OF THE UNIT ARE 40 INCHES WIDE X 146 INCHES LONG X 58 INCHES HIGH

DUAL 18" WHITE INTRALOX BELT CONVEYOR PACK OFF S/S CONVEYOR, BOTH BELTS ARE 18" W X 72' LONG, TABLES MEASURES 15-1/2" W X 56-1/2" LONG - UNIT IS CURRENTLY SET UP WITH A SLIGHT INCLINE. CURRENT INFEED IS 17" AND 36" HIGH WITH A DISCHARGE OF 24" AND 48" -- 1/2 HP S/S WASHDOWN DRIVE, 3/60/230/460 V, SINGLE DRIVE DRIVES BOTH CONVEYOR BELTS, ADJUSTABLE LEGS TO VARY INFEED AND DISCHARGE HEIGHTS, PORTABLE ON CASTERS -- LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION.

KEY ISO FLO 431751-1 SANITARY SHAKER/FEEDER S/N: 03-96940 APROX. 18 INCHES X 10 FOOT, THIS UNIT WAS LAST USED IN THE DAIRY INDUSTRY AND REMAINS IN EXCELLENT CONDITION.ALL STAINLESS STEEL SANITARY CONSTRUCTION, OVERALL DIMENSIONS OF THE UNIT MEASURES 30 INCHES WIDE X 122 INCHES LONG X 38 INCHES HIGH, SHAKER FEEDER PAN MEASURES 18 INCHES WIDE X 112 INCHES LONG, SYSTEM HAS A STAINLESS STEEL TOP COVER WITH 2 LARGE INFEEDS, THIS COVER ALLOWS AN ADDITIONAL 5 INCHES OF PRODUCT CARRY, UNIT HAS 5 INCH SIDES

DORNER SERIES 2200 INSPECTION CONVEYOR, APROX. 3- 1/2 INCHES WIDE X 36 INCHES LONG WITH MARKEM 9840 DATA CONTROL DISPLAY, ELECTRIC EYES, AIR OPERATED REJECT, HINGED COVERS , ALL STAINLESS STEEL FRAME, ADJUSTABLE LEGS, OVERALL DIMENSIONS ARE 65 INCHES HIGH X 42 INCHES WIDE X 42 INCHES LONG

FOOD PROCESS SYSTEMS 6000 S/S SANITARY BOX FILLER S/N: 145702 WITH ALLEN BRADLEY ULTRA 3000 CONTROLLERS WITH PANELVIEW 300 SCREEN, A-B SERVO MOTOR, APROX. 12" W X 110" L INTRALOX BOX FILLING CONVEYOR SYSTEM, MFG. BY FOOD PROCESS SYSTEMS, LODI, WI; WHITE FLIGHTED INTRALOX BELT SET AT 36" WORK HEIGHT, S/S SANITARY CONSTRUCTION, SEE THROUGH PLASTIC FEED CHUTE OVER BELT, HAS PUSH OFF REJECT FEATURES. THIS WAS A STAND ALONE SYSTEM USED TO FILL BOXES OF APPETIZERS. UNIT WAS FEED FROM AN ISHIDA SCALE.

2010 MARCHANT SCHMIDT S/S SANITARY ACCUMULATION AND DIVERGER CONVEYOR THIS IS AN ACCUMULATION AND DIVERGING UNIT. IT CAN DIVERT 4-LANES OF PRODUCT AND ACCUMULATE, THEN DIVERT TO SINGLE FILE AT 120 PCS. A MINUTE, UNIT HAS (4) 1-5/8" W X 25" L FLAT BELTS AT INFEED, THEY FEED ONTO ACCUMULATION AREA BELTS. THERE ARE (16) V-BELT DESIGN BELTS. OVERALL 9" W X 33" L, THEY FEED ONTO DIVERGER SECTION WHICH IS 15"W X 40"L COMPRISED OF SS RODS AND FLAT PUCKS (1-1/2"W X 4"W), ADJUSTABLE FEET. CURRENTLY SET AT 44" IN AND 42" OUT, ALLEN BRADLEY MICROLOGIC CONTROLLER, ELECTRIC EYE AND AIR PNEUMATIC IN ACCUMULATION SECTION. UNIT IS LIKE BRAND NEW AND REMAINS IN EXCELLENT WORKING CONDITION. S/N: 18511-023

NERCON INCLINE BELT CONVEYOR, APROX. 12 INCH WIDE X 123 INCHES LONG, INFEED HEIGHT IS 15 INCHES, DISCHARGE HEIGHT IS 46 INCHES, 2 1/4 INCH ADJUSTABLE SIDERAILS, INFEED AND DISCHARGE HEIGHT ADJUSTABLE WITH ADJUSTABLE FOOTPADS, 1 HP BALDOR DRIVE WITH TIGEAR GEARBOX 3/60/230/460 VOLT, VIBCO ADJUSTABLE SPEED CONTROLLER, LAST USED IN FOOD INDUSTRY AS A BOX CONVEYOR

SMALLEY 1-V-015-007-SS-USDA VIBRATORY S/S FEEDER CONVEYOR S/N: 9108 APROX.- 15" W X 84" L X 37" DISCHARGE HEIGHT - LAST USED IN FOOD INDUSTRY, SELF-CONTAINED ELECTRIC/HYDRAULIC OPERATED - NOT ADJUSTABLE SPEED, 1/2 HP, 208/230-460 V, OVERALL DIMENSIONS 39" W X 84" L X 68" H, ALL S/S SANITARY USDA APPROVED CONSTRUCTION, UNIT IS IN EXCELLENT WORKING CONDITION, LIKE NEW, UNIT IS PARTIALLY SKIDDED NOW AND CAN BE COMPLETELY CRATED FOR $250

HISPEED CM60MM-MS CHECKWEIGHER S/N: 10760 UNIT LAST USED IN THE FOOD INDUSTRY, USED IN EXCELLENT CONDITION, PEDESTAL COLUMN CONTROL HEADS, SCALE HEAD IS MISSING DRIVE MOTOR, CHAINS ARE 6-1/4" APART AND 20-1/2" L, SYSTEM FIRES UP UNDER POWER

HOPPMAN CENTRIFUGAL BOTTLE FEEDER, MODEL FT/40, S/N 16136

FOOD PROCESS SYSTEMS S/S SANITARY BOX FILLER ON PORTABLE CASTERS, WITH ALLEN BRADLEY SERVO MOTOR AND CONTROLS, APROX. 12" W X 116" L BOX FILLING CONVEYOR SYSTEM, BLUE INTRALOX BELT SET AT 32" WORK HEIGHT, SEE THROUGH PLASTIC FEED CHUTE OVER BELT, OAD'S: APROX. 36" W X 120" L X 86" H. USED IN EXCELLENT WORKING CONDITION.

NEW ENGLAND MACHINERY STAINLESS STEEL INCLINE CLEATED BELT CONVEYOR, STAINLESS STEEL CONSTRUCTION, HOPPER MEASURES 50 INCHES X 50 INCHES X 22 INCHES, 20 INCH WIDE SOLID BELTING, 3 INCH HIGH CLEATS, DISCHARGE HEIGHT IS 80 INCHES, UNIT IS PORTABLE ON CASTERS

HISPEED CM60MM-MS CHECKWEIGHER S/N: 10761 UNIT LAST USED IN THE FOOD INDUSTRY, USED IN EXCELLENT CONDITION, PEDESTAL COLUMN CONTROL HEADS, SCALE HEAD IS MISSING DRIVE MOTOR,CHAINS ARE 6-1/4" APART AND 20-1/2" L, SYSTEM FIRES UP UNDER POWER

WAUKESHA CHERRY BURRELL 624DE THERMUTATOR PRODUCT 400 PSI, MEDIA 250 PSI, PRODUCT 400 DEG F, MEDIA 400 DEG F, UNIT COMPLETE WITH START/STOP CONTROLS, OVERALL DIMENSIONS 72 INCHES WIDE X 72 INCHES LONG X 30 INCHES HIGH, LAST USED IN THE FOOD INDUSTRY, USED IN EXCELLENT CONDITION S/N: 98113UA

APROX. 10" WIDE X 281" LONG INCLINE S/S SANITARY INTRALO BELT CONVEYOR WITH 1/2" HIGH CLEATS, 9" APART, INFEED 9" HIGH, DISCHARGE 13.5"; 2" GUIDE RAILS RUN ENTIRE LENGTH OF CONVEYOR, PORTABLE LOCKING CASTERS, LESSON S/S WASH DOWN DRIVE MOTOR, SEE MOTOR TAG PHOTO FOR SPECS. UNIT WAS LAST USED IN THE FOOD INDUSTRY AS A PACK OFF CONVEYOR ROM A BAGGER. SYSTEM IS IN EXCELLENT WORKING CONDITION.

2-TANK CIP UNIT, EACH TANK APROX. 50 GAL., UNIT LAST USED IN THE DAIRY INDUSTRY, ALL S/S ON COMMON FRAME, EACH TANK MEASURES 24" X 24" X 37" DEEP, OVERALL DIMENSIONS OF THE UNIT ARE 53" L X 26" W X 55" H

ECONO CHESSE CORP. 16" W X 189" L S/S SANITARY INCLINE BLUE BELT CONVEYOR, S/N2 WITH 16" WIDE SANITARY SOLID BLUE BELTING, FIRST SECTION OF CONVEYOR MEASURES 90" BEFORE INCLINE SECTION, 8" SIDE RAILS RUN THE ENTIRE FIRST SECTION ON THE CONVEYOR, INCLINE TROUGHING SECTION OF CONVEYOR MEASURES 96", INFEED HEIGHT IS 19", DISCHARGE HEIGHT IS 48", HEIGHT COULD BE RAISED WITH ADJUSTABLE LEGS, OVERALL DIMENSIONS ARE 189" L X 45" W X 55" H, BALDOR 2 HP DRIVE, 3/60/30/460 V, 1755 RPM, 1.5 SECOND PER FOOT SPEED, VIDEO OF SYSTEM UNDER POWER UPON REUEST

2002 BLENTECH SM-4848-PJS S/S SANITRY BATCH STEAM COOKER, LASTED UTILIZED IN THE FOOD INDUSTRY, MAWP PSIG 45 AT 292 DEGREE F, MDMT 45 PSIG AT -25 DEGREE, PRESSURE JACKETED AND LIVE STEAM BOTTOM INJECTION, SCRAPED SURFACE AGITATION WITH PADDLES, APROX. 22 CU. FT. WORKING (630 LITRES), UNIT WAS RECENTLY ULTRASOUND TESTED FOR JACKET INTEGRITY. NOTE: UNIT WILL NEED TOP STEAM COVER LID AND SHAFT SEARS IN REAR

APROX. 10" WIDE X 158" LONG S/S BLOWOFF BELT CONVEYOR WITH 10" WIDE BELT WITH PERFORATIONS TO ALLOW AIR TO BE BLOWN ON THE PRODUCT, 158" LONG, 30" INFEED AND DISCHARGE HEIGHT (HEIGHTS CAN BE VARIED WITH ADJUSTABLE FOOT PADS); .5 HP, 208-230/460 S/S WASH DOWN DRIVE MOTOR, 14" BACKSPLASH THAT RUNS 154", SYSTEM IS COMPLETE WITH BLOWER, NEW SPARE BELT TO BE INCLUDED AND SHOWN IN PHOTOS, THIS SYSTEM SHOULD SHIP VIA FLATBED DUE TO THE OVERALL LENGTH, MIGHT BE ABLE TO FIND SOMEONE TO TAKE THIS COMMON CARRIER, SYSTEM WAS LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION.

APROX. 10" WIDE X 201" LONG INCLINE INTRALO BELT CONVEYOR WITH 12" HIGH INFEED, 41" HIGH DISCHARGES, S/S SIDE RAILS - RUN ENTIRE LENGTH OF UNIT; ALL S/S SANITARY CONSTRUCTION; HYDRAULIC DRIVEN, PORTABLE ON CASTERS

2011 FABCO F4-FBC 18" X 108" S/S SANITARY CONVEYOR S/N: 310305-431 WITH 2-LUG LINK CHAIN FOR BLOCKS OR BOXES, 19" BETWEEN SIDE RAILS WITH 3" HIGH SIDE WALLS, 13" OVERALL WIDE ACROSS CHAIN AREA, 108" LONG BELTS, 31" HIGH WITH ADJUSTABLE LEGS, 1 HP, 208-230/460 - COMPLETE WITH CONTROL BOX, UNIT HAS NEW BELTING ON IT. USED BELTING WILL COME WITH THE CONVEYOR, LAST USED IN THE FOOD INDUSTRY TO CONVEY BLOCKS OF CHEESE, USED IN VERY GOOD WORKING CONDITION.

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, S/N: 50072 WITH 2" TAPE HEAD, 110 VOLT

3M 700 RKS TOP AND BOTTOM CASE TAPER, TYPE 19300, WITH 3" TAPE HEADS, 115 VOLT, 5.8 AMPS S/N: 6187

INTERPACK TOP AND BOTTOM CASE SEALER TAPER, MODEL 4-B, S/N: TM09511 E 001 WITH AUTOFLAP. IPG'S UA SERIES UNIFORM AUTOMATIC CASE SEALERS ARE OPERATOR FREE MACHINES THAT FOLD THE TOP FOUR FLAPS AND PROCESS SAME SIZED RSC STYLE CASES. SIDE BELT DRIVE IS PREFERRED FOR VOID FILLS, OVERFILLS AND LIGHT WEIGHT CASES; OFFSET TAPE HEADS WILL PROCESS AS LOW AS 3-1/2" TALL, COMPACT 65" LONG FRAME; STANDARD INTERLOCKING SAFETY GATES; SELECTABLE FLOATING UPPER HEAD TO PROCESS MILD OVERFILLS; STANDARD INDEXTING GATE; SELF TENSIONING / SELF TRACKING BELT DRIVE. INTERPACK CAN CUSTOMIZE TO SPECIFIC REQIREMENTS SUCH AS LINE VOLTAGE, OPERATION RANGE OR 4-FLAP PICKUP ASSEMBLIES. SYSTEM JUST REMOVED FROM MA CHEESE MFG. FACILITY AND REMAIN IN EXCELLENT WORKING CONDITION.

BRADMAN LAKE DUAL MANDREL TRAY FORMER, MODEL XS2-60, S/N: 16891 WITH ALLEN BRADLEY MICROLOGIX CONTROLLER, 480 V, PORTABLE ON CASTERS, UNIT LAST USED IN THE FOOD INDUSTRY, SYSTEM REMAINS IN EXCELLENT CONDITION

CTM 3600-PA PRINTER APPLICATOR WITH PORTABLE STAND AND PARTS UNIT S/N: 3600-0726-0504. THE 3600-PA DUAL ACTION TAMP (DAT) PRINTER APPLICATOR IS A HIGH SPEED, THERMAL TRANSFER LABELER USED TO PRINT AND APPLY PRESSURE SENSITIVE LABELS THAT CAN BE PROGRAMMED FOR SINGLE OR TWO PANEL LABELING APPLICATIONS APPLIED TO VARIOUS CARTONS, CASES OR PALLETS. THE SINGLE PANEL CAN BE APPLIED TO EITHER THE FRONT OR THE SIDE. SATO OR ZEBRA PRINT ENGINE INTEGRATED INTO THE APPLICATOR TO PRINT VARIABLE DATA. CAN BE MOUNTED IN ALMOST ANY POSITION TO APPLY LABELS TO THE LEADING, SIDE OR TRAILING PANELS OF VARIOUS PRODUCTS. MOUNTING CAN BE ORIENTED UP OR DOWN DEPENDING UPON LABEL SIZE AND POSITION ON THE PRODUCT. SHORT HEIGHT ACTUATOR ASSEMBLY ALLOWS THE UNIT TO REACH OVER A CONVEYOR TO PRODUCTS WHICH ARE NOT AT THE EDGE OF THE CONVEYOR - 4" TALL LABELS CAN BE LOCATED 1/4" FROM THE BOTTOM OF PRODUCTS. RIGHT HAND OR LEFT HAND VERSION FOR EITHER SIDE OF CONVEYOR UP TO 7.1" WIDE LABELS, UP TO 6.6" PRINT WIDTH BUILT-IN BAR CODES AND ALPHA-NUMERIC FONTS PROVEN TAMP-BLOW APPLICATION PLC CONTROL USER-FRIENDLY OPERATOR INTERFACE WITH EASY-TO-READ LCD DISPLAY. QUICK ACCESS TO SET-UP PARAMETERS - RUGGED AND VERSATILE FOR STANDARD AND CUSTOM APPLICATIONS, EQUIPPED WITH MULTIPLE ONBOARD I/O SIGNALS PREWIRED TO EXTERNAL CONNECTORS. DIMENSIONS DEPENDENT UPON LINE CONFIGURATION WEIGHT APPROX. 150 LBS., ELECTRICAL 108-132 VOLTS AC, 5 AMPS,54/60 HERTZ, SINGLE PHASE, PNEUMATIC 90 PSI., 3-5 CFM, COMMUNICATIONS RS 232, PARALLEL -ENVIRONMENTAL OPERATING 41O F TO 104O F (5O C TO 40O C), STORAGE -4O F TO 104O F (-20O C TO 40O C), PRINTING METHOD THERMAL TRANSFER, DIRECT THERMAL PRINT RESOLUTION 203 OR 305 DPI, DEPENDENT UPON PRINT ENGINE, PRODUCT SENSING PHOTOELECTRIC, PLC INPUT, APPLICATOR CONTROL MICRO PLC WITH OPERATOR KEY-PAD AND 2-LINE DISPLAY FOR PRINT SPEED, FONTS, BAR CODES OR GRAPHICS, SEE PROGRAMMING MANUAL OF PRINTER MANUFACTURER. THE 3600A-PA PRINTER APPLICATOR IS A HIGH-SPEED LABELER USED TO THERMALLY PRINT AND APPLY PRESSURE SENSITIVE LABELS TO MOVING PRODUCTS. A THERMAL TRANSFER PRINTER IS INTEGRATED INTO AN APPLICATOR TO FORM A SELFCONTAINED UNIT THAT WILL PRINT VARIABLE DATA ONTO A LABEL. THE PRINTER/APPLICATOR CAN BE MOUNTED IN ALMOST ANY POSITION ADJACENT TO PRODUCT FLOW TO APPLY LABELS TO TOP, SIDES OR BOTTOM OF PRODUCTS AS THEY PASS BY.

GARVER ELECTRIFUGE S/N: 12602

GROTE S/A SANITARY SLICER/APPLICATOR. PRODUCT SIZE UP TO 6" (152.4 MM) DIA., SLICING ZONE - 22", 30" OR 48" WIDE; SLICE THICKNESS UP TO .5" (12.7 MM) STANDARD, UP TO 1.5" (38.1 MM) OPTIONAL; SLICING ZONE WIDTHS 22" (558.8 MM), 30" (762 MM), OR 40" (1016 MM); ELECTRICAL 200 - 575 VAC, 50/60 HZ, 3 PHASE; WATER 40-100 PSI (REQUIRED WITH SOME PRODUCTS) -- THE SLICER/APPLICATOR SLICES AND APPLIES A WIDE RANGE OF PRODUCTS DIRECTLY ONTO YOUR PROCESSING LINES IN MULTIPLE LANES WITH RPECISE TARGETING; CUSTOMIZE TO YOUR OPERATION WITH HEAD AND LANE CONFIGURATION, SLICING ZONE SIZE, LEFT OR RIGHT HAND ORIENTATION AND CANTILEVERED DESIGN. CONTINUOUS PRODUCT LOADING WITH GRAVITY FEED AND OPTIONAL LOW-LEVEL SENSOR REDUCES DOWNTIME AND MAINTAINES SLICE QUALITY. ITS NEW SANITARY DESIGN FEATURES AN OPEN CHANNEL FRAME AND EASY ACCESS FOR FAST AND THOROUGH CLEANING. SLICE AND APPLY OR BULK SLICE UP TO 150 STROKES PER MINUTE, PER LANE; STACK AND SHINGLE UP TO 120 STROKES PER MINUTE, PER LANE; CUSTOM HEIGHT, FRAME ORIENTATION, HEAD AND LANE CONFIGURATIONS; CONTINUOUS PRODUCT LOADING REDUCES DOWNTIME; SANITARY DESIGN WITH NEW OPEN CHANNEL FRAME, WATERSHED ENCLOSURE AND EASILY REMOVABLE PARTS; LAST USED IN THE FOOD INDUSTRY SLICING CHEESE, USED IN EXCELLENT CONDITION.

GIZZARD S/S WASHER / CLEANER, MODEL MC2 - POULTRY PROCESSING EQUIPMENT. GIZZARD WASHER/CLEANER IS DESIGNED FOR REMOVING GASTRIC CONTENTS AND FAT FROM THE SURFACE OF OPENED GIZZARDS. THE GIZZARD WASHER AND CLEANER IS MANUFACTURED IN STAINLESS AND ACID RESISTANT STEEL. GIZZARDS ARE MANUALLY PLACED INTO THE MACHINE. THEY PASS THROUGH THE MACHINE, THEY ARE CLEANED OF FAT AND GASTRIC CONTENTS AND WASHED WITH WATER. AFTER THESE OPERATIONS THE GIZZARDS EXIT AUTOMATICALLY

SPROUT WALDRON PS34 SANITARY PEDESTAL SIFTER, SINGLE DECK WITH 2-SEPARATIONS, SYSTEM WILL COME WITH 3 SCREENS, 1 HP DRIVE MOTOR, 3/60/230-460 V, THIS WAS LAST USED IN THE DAIRY INDUSTRY UNDER A SPRAY DRYER, SYSTEM WAS JUST RUN THROUGH SHOP AND REMAINS IN EXCELLENT WORKING CONDITION

GIZZARD S/S WASHER / CLEANER, MODEL MC2 - POULTRY PROCESSING EQUIPMENT. GIZZARD WASHER/CLEANER IS DESIGNED FOR REMOVING GASTRIC CONTENTS AND FAT FROM THE SURFACE OF OPENED GIZZARDS. THE GIZZARD WASHER AND CLEANER IS MANUFACTURED IN STAINLESS AND ACID RESISTANT STEEL. GIZZARDS ARE MANUALLY PLACED INTO THE MACHINE. THEY PASS THROUGH THE MACHINE, THEY ARE CLEANED OF FAT AND GASTRIC CONTENTS AND WASHED WITH WATER. AFTER THESE OPERATIONS THE GIZZARDS EXIT AUTOMATICALLY

PLASTIC PALLETS - APROX. 40" X 48"

1998 DIXIE EVOLUTION THERMOFORMER, MODEL EVOLUTION, S/N: EVO.0211 -- SYSTEM LAST USED IN THE DAIRY INDUSTRY DOING CHEESE -- UNIT IS IN EXCELLENT CONDITION AND COMES WITH NUMEROUS SPARE PARTS.

(20) PLASTIC PALLETS - APROX. 40" X 48"

ANDERSON AJ300 CHART RECORDER

ANDERSON AJ 300 CHART RECORDER