Machine Tools Plant Utilities Material Handling Equipment and MROParts Available from Industry Leaders

EATON POW R LINE SWITCH 120V AND 208V

EATON POW R LINE SWITCH 120V AND 208V

DJ PRODUCTS 5W HEAVY DUTY CART CADDY THIS LISTING IS FOR THE CART CADDY ONLY, NO CARTS INCLUDED. 36 VDC (3) 12 VDC BATTERIES. THERE ARE (2) OF THESE AVAILABLE, LISTED AND PRICED SEPARATELY. MANUFACTURES INFORMATION:-MOVES CARTS UP TO 10,000 LBS-36 VOLT 3 BATTERY SYSTEM-QUICKLY CONNECTS TO ANY CART-NO INSTALLING TOW ARMS ON CART-0-3 MPH FORWARD/REVERSE-CHARGER WORKS WITH 120/220 OUTLETS. THE CARTCADDY5WP HD MOTORIZED CART MOVER IS A HEAVY-DUTY BATTERY POWERED CART MOVER DESIGNED TO PUSH, PULL, OR MANEUVER CARTS OR EQUIPMENT UP TO 10,000 POUNDS. THE CARTCADDY5WP HD IS THE HEAVY-DUTY UPGRADE TO THE CARTCADDY5WP. MORE WEIGHT OVER THE DRIVE TIRES INCREASES TRACTION, ALLOWING THE POWERED CART MOVER TO PUSH AND PULL HEAVIER LOADS. ONE OF THE MOST COMMON APPLICATIONS OF THE CARTCADDY5WP HD MOTORIZED CART MOVER IS THE CART WITH TWO STRAIGHT CASTERS AND TWO FRONT SWIVEL CASTERS. WHEN ATTACHED TO THE SWIVEL CASTER, THE CARTCADDYHD DOLLY MOVER PROVIDES THE PUSHING AND PULLING POWER THAT IS NECESSARY FOR EASY TURNING AND SMOOTH MANEUVERING WITH THE CART MOVER. THE CARTCADDY5WP HEAVY DUTY HAS THE PUSHING AND PULLING POWER THAT IS NECESSARY FOR TURNING AND SMOOTH MANEUVERING WITH THE CC5WP HD. ON THE END OF ITS 5TH WHEEL ARM IS AN ELECTRIC LIFT KIT THAT CA BE RAISED AND LOWERED, SECURELY ATTACHING A CUSTOM CART ATTACHMENT TO BOTTOM OF ANY CART. AND ONCE THE ATTACHMENT IS SECURELY ATTACHED, THE MOTORIZED CART MOVER CA PIVOT A FULL 180 DEGREES UNDER THE ARM, MAKING IT POSSIBLE FOR THE CARTCADDY TO BE TURNED WITHOUT JACKKNIFING THE CART. PLUS, THE LIFTING MOTION TRANSFERS WEIGHT FROM THE LOAD TO THE DRIVE TIRES OF THE MOTORIZED CART MOVER FOR THE EXTRA TRACTION NEEDED IN PULLING THESE HEAVY CARTS. DEPENDING ON THE SIZE AND STYLE OF THE CART CASTERS, AS WELL AS THE CONDITION OF THE FLOOR, THE CARTCADDY CA PULL OR PUSH UP TO 10,000 LBS.

EMERSON T SERIES MICRON MOTION SENSOR WITH MVD TRANSMITTERINSTRUCTION MANUAL INCLUDED

.25AS PLASTIC ASSEMBLY SYSTEM .25AS ACTUATOR SYSTEM ON MOBILE TABLE

GEA TUCHENHAGEN CIP VALVE ASSEMBLY WITH SANI MATIC STRAINERS

PACIFIC FLOORCARE S-28 DISC WALK BEHIND FLOOR SCRUBBER. PACIFIC FLOORCAREOS PATENTED ORBITAL SCRUBBING TECHNOLOGY TRULY DELINEATES ITSELF WITH ITS CHEMICAL-FREE FINISH REMOVAL CAPABILITIES; DELIVERING MASSIVE LABOR AND MATERIAL COST REDUCTIONS AND IMPROVED INDOOR AIR QUALITY VERSUS TRADITIONAL STRIPPING METHODS. IT HAS THE HIGHEST DOWN PRESSURE IN THE 22-GALLON, 28-INCH ORBITAL CATEGORY. SOLUTION CAPACITY: 22 GALLONS / 83 LITERS. CLEANING PATH WIDTH: 28 IN / 711 MM. PAD DOWN PRESSURE: 70, 110 & 160 LB / 32, 50 & 73 KG. RUN TIME: UP TO 5.5 HOURS. ISOLATOR WARRANTY: INDUSTRY LEADING 5 YEARS / 5,000 HOURS

PISTORIUS MN-200 TWIN BLADE MITER SAW WITH PNEUMATIC HOLD DOWNS 12 INCH BLADES

2014 PATTERSON KELLEY CO. MACH C2000 BOILER. THIS BOILER WAS PURCHASED IN 2014 AND INSTALLED TO TEST AN AIR HANDLING UNIT WE MANUFACTURE. AFTER TESTING, THE BOILER WAS CRATED FOR STORAGE. HAS NOT BEEN USED SINCE.

2001 CREST ULTRASONICS OC4-1218-HE STERILIZER. INDUSTRIAL CLEANER WITH 4 STATION OPERATION OF WASH-RINSE-RINSE-DRY CONFIGURATION. THE RINSES ARE SET UP AS A REVERSE CASCADE FLOW FOR WATER CONSERVATION AND INCLUDE FINAL FRESH SPRAY HEADER ABOVE EACH RINSE. IT INCLUDES MULTIPLY BASKETS AND A NEW REBUILT GENERATOR.

THERMO NESLAB CFT-300 REFRIGERATED RECIRCULATING CHILLER 3 HP COMPRESSOR REFRIGERANT R22 1.5 HP PUMP CABINET STYLE PREVIOUSLY IN PHARMACEUTICAL SERVICE

LAGUN REPUBLIC FTV-2S VERTICAL MILLING MACHINE NEWALL DP700 CONTROL PANEL WITH DIGITAL DISPLAY CURRENTLY RUNNING

NARDINI MS 1440E LATHEOPERATORS CONTROLSMAXIMUM RPM: 400

ROSEMOUNT 3051S1CD2A2B11A2EM8Q4Q8 PRESSURE TRANSMITTERS. LOT OF 2 UNUSED UNITS. BOTH UNITS ARE NEW IN BOX. DIGITAL MANUAL, MOUNTING BRACKETS, AND WIRE ARE INCLUDED WITH EACH.

NISSAN CYM02L20S FORK LIFT TRUCK WITH ELECTRO NETWORKS CHARGER

84" LONG 8" WIDE BELT AUTO-REJECT ADJUSTABLE SPEED LAETUS ARGUS CONTROL CONVEYOR PIECE. 55" LONG AUTO-REJECT ADJUSTABLE SPEED 13.75" WIDE BELT CONVEYOR PIECE. 55" LONG AUTO-REJECT 7.5" WIDE BELT CONVEYOR PIECE.

LANDIS CENTRIFUGAL 12 X 36 GRINDER WITH TAILSTOCK

NOVASCA TECHNOLOGIES PSDP-UV1216T DIGITAL UV OZONE SYSTEM POWER ON(1-2) NOVASCA TECHNOLOGIES PSDP-UV1216T DIGITAL UV OZONE SYSTEM (2-2) NOVASCA TECHNOLOGIES OES-1000D OZONE ELIMINATION SYSTEM

STAUBLI RX-60 CRAUT ROBOTIC ARM WITH CS7 M RX60 CONTROLLER. STAUBLI RX-60 CRAUT ROBOTIC ARM WITH ALL CABLES. STAUBLI CS7 M RX60 CONTROLLER WITH ALL CABLES. FAIRCHILD PC FOR CONTROLLER INTERFACE WITH ALL CABLES. REMOVED FROM FUNCTIONAL EQUIPMENT AND IN EXCELLENT CONDITION.

CHARLES BESELER T-14-8D SHRINK TUNNELINSTRUCTION MANUAL

RX-29 ROTAP SCREENERNO SCREEN PACK OR BOTTOM PAN WITH SCREENDIGITAL TIMER3/4 HP MOTOR DRIVE

RX-30 ROTAP SCREENERNO SCREEN PACKTIMERMOTOR DRIVE- .75 HP

AIRCLEAN SYSTEMS AC740C FUME AND FLOW HOOD

DENTON DESK V COLD SPLUTTER UNIT FOR SEM SAMPLE PREPARATIONAPPLICATIONS SEM SAMPLE PREPARATION (SPUTTERING & CARBON EVAPORATION) TEM SAMPLE PREPARATION (CARBON EVAPORATION) X-RAY MICROANALYSIS SAMPLE PREPARATION (CARBON EVAPORATION) HIGH RESOLUTION SAMPLE PREPARATION SEMICONDUCTORS GEOLOGY FORENSICS MATERIAL SCIENCE MEDICINE LIFE SCIENCE INCLUDES ISI DS-130 SCANING MICROSCOPE

FRISTAM FZX 2100 LIQUID RING PUMP

ROSEMOUNT 3051 SERIES PRESSURE TRANSMITTER WITH HARTQUICK INSTALLATION GUIDE BOOK

DJ PRODUCTS CART CADDY 5W HEAVY DUTY THIS LISTING IS FOR THE CART CADDY ONLY, NO CARTS INCLUDED. 36 VDC (3) 12 VDC BATTERIES. THERE ARE (2) OF THESE AVAILABLE, LISTED AND PRICED SEPARATELY. MANUFACTURES INFORMATION:-MOVES CARTS UP TO 10,000 LBS-36 VOLT 3 BATTERY SYSTEM-QUICKLY CONNECTS TO ANY CART-NO INSTALLING TOW ARMS ON CART-0-3 MPH FORWARD/REVERSE-CHARGER WORKS WITH 120/220 OUTLETS. THE CARTCADDY5WP HD MOTORIZED CART MOVER IS A HEAVY-DUTY BATTERY POWERED CART MOVER DESIGNED TO PUSH, PULL, OR MANEUVER CARTS OR EQUIPMENT UP TO 10,000 POUNDS. THE CARTCADDY5WP HD IS THE HEAVY-DUTY UPGRADE TO THE CARTCADDY5WP. MORE WEIGHT OVER THE DRIVE TIRES INCREASES TRACTION, ALLOWING THE POWERED CART MOVER TO PUSH AND PULL HEAVIER LOADS. ONE OF THE MOST COMMON APPLICATIONS OF THE CARTCADDY5WP HD MOTORIZED CART MOVER IS THE CART WITH TWO STRAIGHT CASTERS AND TWO FRONT SWIVEL CASTERS. WHEN ATTACHED TO THE SWIVEL CASTER, THE CARTCADDYHD DOLLY MOVER PROVIDES THE PUSHING AND PULLING POWER THAT IS NECESSARY FOR EASY TURNING AND SMOOTH MANEUVERING WITH THE CART MOVER. THE CARTCADDY5WP HEAVY DUTY HAS THE PUSHING AND PULLING POWER THAT IS NECESSARY FOR TURNING AND SMOOTH MANEUVERING WITH THE CC5WP HD. ON THE END OF ITS 5TH WHEEL ARM IS AN ELECTRIC LIFT KIT THAT CA BE RAISED AND LOWERED, SECURELY ATTACHING A CUSTOM CART ATTACHMENT TO BOTTOM OF ANY CART. AND ONCE THE ATTACHMENT IS SECURELY ATTACHED, THE MOTORIZED CART MOVER CA PIVOT A FULL 180 DEGREES UNDER THE ARM, MAKING IT POSSIBLE FOR THE CARTCADDY TO BE TURNED WITHOUT JACKKNIFING THE CART. PLUS, THE LIFTING MOTION TRANSFERS WEIGHT FROM THE LOAD TO THE DRIVE TIRES OF THE MOTORIZED CART MOVER FOR THE EXTRA TRACTION NEEDED IN PULLING THESE HEAVY CARTS. DEPENDING ON THE SIZE AND STYLE OF THE CART CASTERS, AS WELL AS THE CONDITION OF THE FLOOR, THE CARTCADDY CA PULL OR PUSH UP TO 10,000 LBS.

PONNDORF PX27 HOSE PUMP

NEW YORK BLOWER ARR-10 BLOWER; WHEEL SIZE AND TYPE: 15 PLRSHOP NUMBER: 2016-12319-014 INCH WG SP2410 RPM2.67 BHP0.075 DENS 70 DEG F UB DISCCW ROT

WILDON PROFLO DIAPHRAGM PUMP

DIMPLES LKV3000 CHILLER

TERRA UNIVERSAL STAINLESS STEEL TWO PORT GLOVE BOXPASS-THRU DIMENSIONS: 12.75" X 12.75"INCLUDES: GLASGOL HEAT MANTLE

METTLER TOLEDO HI-SPEED, INC. RX3 CHECK WEIGHERCHECK WEIGHER IS BEING, MAY BE MISSING PARTS(2) NORDSON DURABLUE 25 GLUERSDYNATECH GLUE POTBOXES OF HOSES AND ELECTRICALEVERYTHING ON THIS SKID IS BEING OFFERED AS-IS

LANDIS CENTRIFUGAL 10 X 20 CYLINDRICAL GRINDER 3 HP HEAD 14" WHEEL TAILLSTOCK

K-TRON K2MODULAR LOSS IN WEIGHT FEEDER WITH SCALE. SCALE RANGE TO: 180 KG. TOP HOPPER WITH AGITATED FEEDER. STAINLESS STEEL CONSTRUCTION. OPERATORS CONTROLS. ON CASTERS. PREVIOUSLY USED IN A PHARMACEUTICAL SITE.

ALSOP 9000-FM AGITATOR

FRISTAM FZX 2100 LIQUID RING PUMP

FISHER CONTROLS 92B PRESSURE REDUCING VALVE

ANDERSON RSV SANITARY ELECTRONIC PRESSURE TRANSMITTERINSTRUCTION MANUAL INCLUDED

LOT OF 2 HEAT EXCHANGE CYLINDER PUMP SHAFTSTAINLESS STEEL

FISCHBEIN S16204123212000 BAG SEALERCURRENTLY UTILIZED FOR 20 TO 55 LBS BAGS

NUTTING Z54-006-121 TUG CARTS 48.5" X 95" RUBBER COATED PLATFORMS INFLATABLE TIRES FORK OPENINGS ON SIDES REMOVABLE END POSTS HITCH BALL ON 3 CARTS; BALL RECEIVER ON ALL 4

IB IMPERIAL BROWN UDS-4 DOUBLE DOOR WALK IN COOLER WITH 6 FANS; TEMPERATURE RANGE: -40 TO 20 C. -40 F TO 65 F.; DOUBLE DOOR; SIX (6) FAN COOLING UNIT; INSIDE DIMENSIONS: 11' X 13'; COMPRESSOR MOUNTED ON THE ROOF: HEATCRAFT REFRIGERATION PRODUCTS LLC, MODEL NO. MOZO60L64CF, SERIAL NO. T14H08799, 1/3 HP FAN MOTOR, 460/3/60 HZ; PREVIOUSLY USED IN A MAJOR FOOD PROCESSING PLANT

PRO-TECH FALCON 36 LAMINATOR. POWERS ON. ANALOG CONTROLS. USER MANUAL.

IMAJE JAMIE 1000 S8 INKJET CODE PRINTER

PONNDORF PX27 HOSE PUMP

IMAJE JAMIE 1000 S8 INKJET CODE PRINTER

FORMLABS FORM 1+ SLA RESIN PRINTERBUILD VOLUME: 125 X 125 X 165 MM (4.9 X 4.9 X 6.5 IN)MIN FEATURE SIZE: 300 MICRONS (0.012 IN)LAYER THICKNESS (AXIS RESOLUTION): 25, 50, OR 100 MICRONS (0.001, 0.002, OR 0.004 INCHES)SOFTWARE CA BE DOWNLOADED FROM THE FORMLABS WEBSITEINCLUDES:(2) BUILD PLATFORMS(1) SPARE MIRROR(4) USED RESIN TANKS (EACH USED WITH A DIFFERENT COLOR RESIN)(1) NEW-IN-BOX RESIN TANK(4) BOTTLES OF UNUSED RESIN (BLACK, GREY, TOUGH, CLEAR)(1) TWEEZERS(1) RESIN SCRAPERADDITIONAL RESINS CA BE PURCHASED FROM FORMLABS, BUT RESIN TANKS ARE NO LONGER MANUFACTURED AND CANOT BE REPLACED WHEN THE PDMS LAYER BECOMES TOO CLOUDY OR DAMAGED. IT IS POSSIBLE TO REPLACE THE PDMS LAYER, HOWEVER.

DAYTON 2ATC7 30 INCH INDUSTRIAL AIR CANNON ELECTRICAL SPECS: 208-230/440V; 60HZ 12,800 CFM

LUTZ PUMPS ME I 6-120 DRUM PUMP WITH AN UNIVERSAL CHEMICAL HOSE AND NOZZLESPOWERS ON