CR Machine Fabrication

Thompson Auctioneers

Category: MISC

Total Lots: 98

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 98 lots

Year	Make	Model	Lot Description	Hammer Price
	LUCIFER	RD7-KHE-24	LUCIFER RD7-KHE-24 HEAT TREAT FURNACE, ELECTRIC, 2,200 DEGREE MAX., 220/1/60 S/N: 7013 LUCIFER · RD7-KHE-24	🔒 Subscribe
	MARVEL	SERIES 8, MARK II	MARVEL SERIES 8, MARK II TILT FRAME VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY S/N: 826347 MARVEL · SERIES 8, MARK II	🔒 Subscribe
1996	SOUTHWEST INDUSTRIES	PROTOTRAK DPM	1996 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, ELECTRONIC VARIABLE SPEED DRIVE, 40 TAPER, POWER DRAWER BAR, 9" X 49" TABLE, 32" X 16" X 23" TRAVELS S/N: 96-2447 1996 · SOUTHWEST INDUSTRIES · PROTOTRAK DPM	🔒 Subscribe
2010	OTC	AX21 UV0000	2010 OTC AX21 UV0000 ROBOTIC WELDER, 6 AXIS, 55.19 INCH HORIZONTAL REACH, HAND PENDANT, CONTROLLER, ROTARY FIXTURE TRUNION, WITH OTC DP400 DIGITAL INVERTER WELDING POWER SUPPLY, 400 AMP, MIG GUN S/N: L21410YZ5080401 2010 · OTC · AX21 UV0000	🔒 Subscribe
1999	SOUTHWEST INDUSTRIES	PROTOTRAK SPORT 1745P	1999 SOUTHWEST INDUSTRIES PROTOTRAK SPORT 1745P CNC TOOLROOM LATHE, PROTOTRAK L2 CNC CONTROL, 17 11/16 INCH SWING, 45 INCH CENTERS, 2 INCH CAPACITY, 10 INCH 3-JAW CHUCK, ALORIS TOOL POST (NO HOLDERS) S/N: 99-87059 1999 · SOUTHWEST INDUSTRIES · PROTOTRAK SPORT 1745P	🔒 Subscribe
1997	SOUTHWEST INDUSTRIES	PROTOTRAK B3	1997 SOUTHWEST INDUSTRIES PROTOTRAK B3 CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER, POWER DRAWER BAR, 10 INCH X 50 INCH TABLE, 31 INCH X 17 INCH X 23.5 INCH TRAVELS S/N: 97-2920 1997 · SOUTHWEST INDUSTRIES · PROTOTRAK B3	🔒 Subscribe
	CLARK	CGC40	CLARK CGC40 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 5,375 LB. CAPACITY LISTED ON TAG, WHCIH WOULD HAVE BEEN CAPACITY WITH PAPER ROLL ATTACHMENT, ESTIMATED CAPACITY NOW WITHOUT PAPER ROLL ATTACHMENT 7,000 TO 8,000 LBS. S/N: CGC470L-U176-6086FR CLARK · CGC40	🔒 Subscribe
	NATIONAL	U6-72-12	NATIONAL MODEL U6-72-12 BOX AND PAN BRAKE, 72 INCH X 12 GAUGE, COMPLETE SET OF FINGERS S/N: 455-405 NATIONAL · U6-72-12	🔒 Subscribe
	RELIANT		RELIANT DRYING OVEN, 8' X 8' X 25' DEPTH, GAS, DISASSEMBLED, READY TO LOAD RELIANT	🔒 Subscribe
2000	SOUTHWEST INDUSTRIES	PROTOTRAK K3	2000 SOUTHWEST INDUSTRIES PROTOTRAK K3 CNC VERTICAL KNEE MILL, PROTOTRAK M2 CNC CONTROL, 10 INCH X 50 INCH TABLE, 31 INCH X 17 INCH TRAVELS, 2-AXIS, 3 HP, R-8 SPINDLE S/N: 00-BM10714 2000 · SOUTHWEST INDUSTRIES · PROTOTRAK K3	🔒 Subscribe
	POWERMATIC	511	POWERMATIC MODEL 511 PANEL SAW, 3 HP, 8 INCH BLADE, 1 1/2 INCH MAX. CUT THICKNESS, 62 INCH MAX. CROSS CUT LENGTH, UNLIMITED MAX. RIP LENGTH, 110/1/60 S/N: 0601201710 POWERMATIC · 511	🔒 Subscribe
	MILLER	MILLERMATIC 251	MILLER MILLERMATIC 251 MIG WELDER, BUILT IN WIRE FEED, 200/230/1/60 S/N: KH140762B MILLER · MILLERMATIC 251	🔒 Subscribe
2006	BAILEIGH	BB-4816	2006 BAILEIGH BB-4816 MAGNETIC SHEET METAL BRAKE, 48 INCH X 16 GAUGE CAPACITY, 6 TON MAGNETIC PULL, CLAMP BARS, 220/1/60 S/N: 057930057 2006 · BAILEIGH · BB-4816	🔒 Subscribe
1997	SOUTHWEST INDUSTRIES	PROTOTRAK DPM	1997 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER, POWER DRAWER BAR, 9 INCH X 49 INCH TABLE, 32 INCH X 16 INCH X 23 INCH TRAVELS, NOTE: NOT IN SERVICE S/N: 97-4079 1997 · SOUTHWEST INDUSTRIES · PROTOTRAK DPM	🔒 Subscribe
	HYSTER	S50XL	HYSTER S50XL FORK LIFT, 5,450 LB. CAPACITY, LP, 3-STAGE MAST, HARD TIRE, SIDE SHIFT S/N: 6187V03356M HYSTER · S50XL	🔒 Subscribe
	CHEVALIER	FSG-2A618	CHEVALIER FSG-2A618 AUTOMATIC SURFACE GRINDER, 2-AXIS, 6 X 18 INCH, COOLANT SYSTEM, MAGNETIC CHUCK S/N: B7842002 CHEVALIER · FSG-2A618	🔒 Subscribe
	TENNSMITH	52" X 16 GAUGE	TENNSMITH 52 INCH X 16 GAUGE MANUAL FOOT SHEAR TENNSMITH · 52" X 16 GAUGE	🔒 Subscribe
	BURR BENCH	4616	BURR BENCH MODEL 4616 METAL FINISHING DEBURRER, TUB 15 5/8 DEEP X 15 1/4 WIDE X 44 1/2 LONG, WITH LID BURR BENCH · 4616	🔒 Subscribe
	MILLER	MILLERMATIC 250	MILLER MILLERMATIC 250 MIG WELDER, BUILT IN WIRE FEED, 230/460/575/1/60 S/N: KK153726 MILLER · MILLERMATIC 250	🔒 Subscribe
	CLARK	CGS12	CLARK CGS12 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 42 INCH FORKS, 2,150 LB. CAPACITY S/N: C127-0151-9236-KOF CLARK · CGS12	🔒 Subscribe
	TENNSMITH	U-48	TENNSMITH U-48, 48" X 16 GAUGE BOX AND PAN BRAKE TENNSMITH · U-48	🔒 Subscribe
	HSQVARNA	HUS-DS-800-CB-DM-280-LS-WV	HSQVARNA CORE DRILL, MODEL HUS-DS-800-CB-DM-280-LS-WV HSQVARNA · HUS-DS-800-CB-DM-280-LS-WV	🔒 Subscribe
2006	COSEN	MH-1016 JA	2006 COSEN MH-1016 JA HORIZONTAL BAND SAW, 10 INCH ROUND CAPACITY, 2 HP, 1 INCH BLADE S/N: 94106156 2006 · COSEN · MH-1016 JA	🔒 Subscribe
	SCOTCHMAN BEWO	CPO 350 NF HA	SCOTCHMAN BEWO CPO 350 NF HA NON-FERROUS SAW, 5 HP, 14 INCH MAX. BLADE SIZE, 4 1/4 INCH ROUND CAPACITY, MITER CUT SCOTCHMAN BEWO · CPO 350 NF HA	🔒 Subscribe
	MILLER	SYNCHROWAVE 250	MILLER SYNCHROWAVE 250 TIG WELDER, WITH CHILLER AND LEADS, 200/230/460/1/60 S/N: KF904313 MILLER · SYNCHROWAVE 250	🔒 Subscribe
	WELLS	8	WELLS MODEL 8, 8 INCH HORIZONTAL BAND SAW, 110/1/60 WELLS · 8	🔒 Subscribe
	GREENLEE	JOB BOX	GREENLEE JOB BOX, EMPTY GREENLEE · JOB BOX	🔒 Subscribe
	KNAACK	90 STORAGE MASTER	KNAACK 90 STORAGE MASTER JOB BOX, EMPTY KNAACK · 90 STORAGE MASTER	🔒 Subscribe
	DO-ALL	16	DO-ALL 16 VERTICAL BAND SAW, WITH (2) NEW BLADES AND NEW WHEEL BELT DO-ALL · 16	🔒 Subscribe
	KALAMAZOO	C-300	KALAMAZOO MODEL C-300 COLD SAW, 12 INCH MAX. BLADE, 45 DEGREE MITER, 4 INCH ROUND CAPACITY S/N: 990212002 KALAMAZOO · C-300	🔒 Subscribe
	MILLER	MILLERMATIC 135	MILLER MILLERMATIC 135 MIG WELDER, BUILT IN WIRE FEED, 110/1/60 S/N: LC583300 MILLER · MILLERMATIC 135	🔒 Subscribe
			3C COLLETS AND RACKS	🔒 Subscribe
			ARBOR PRESS, WITH FLOOR STAND	🔒 Subscribe
	POWERMATIC	33B	POWERMATIC 33B BELT SANDER, 6 INCH, 110/1/60 POWERMATIC · 33B	🔒 Subscribe
	DELTA ROCKWELL		DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60 DELTA ROCKWELL	🔒 Subscribe
			CYCLONE SAND BLAST CABINET	🔒 Subscribe
			3C COLLETS AND RACKS	🔒 Subscribe
			40 TAPER TOOL HOLDER CART WITH TOOL CHANGING BLOCK	🔒 Subscribe
	ROCKWELL	70-6X0	ROCKWELL MODEL 70-6X0 FLOOR MODEL DRILL PRESS, 20" S/N: 1763847 ROCKWELL · 70-6X0	🔒 Subscribe
			R8 JACOBS CHUCK AND (2) R8 FACE MILLS	🔒 Subscribe
	PACKARD PRECISION	SINGLE SPINDLE	PACKARD PRECISION SINGLE SPINDLE DRILL PRESS, FLOOR MODEL, 110/1/60 PACKARD PRECISION · SINGLE SPINDLE	🔒 Subscribe
	DELTA ROCKWELL		DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60 DELTA ROCKWELL	🔒 Subscribe
			FLAME PROOF STORAGE CABINET	🔒 Subscribe
	PROCUNIER	SINGLE SPINDLE	PROCUNIER SINGLE SPINDLE DRILL PRESS AND TAPPING MACHINE, WITH TAPPING HEAD, FLOOR MODEL PROCUNIER · SINGLE SPINDLE	🔒 Subscribe
	KALAMAZOO	6" X 13"	KALAMAZOO 6" X 13" HORIZONTAL BAND SAW, 110/1/60 KALAMAZOO · 6" X 13"	🔒 Subscribe
			DRILL BIT RACK WITH MORSE TAPER DRILLS	🔒 Subscribe
			MORSE TAPER DRILLS	🔒 Subscribe
	TAPMATIC	3JT	TAPMATIC 3JT TAPPING HEAD TAPMATIC · 3JT	🔒 Subscribe
	DELTA ROCKWELL	6"	DELTA ROCKWELL 6" BELT SANDER, 110/1/60 S/N: 688 DELTA ROCKWELL · 6"	🔒 Subscribe
			JOB BOX, EMPTY	🔒 Subscribe

Year	Make	Model	Description	Price
	LUCIFER	RD7-KHE-24	LUCIFER RD7-KHE-24 HEAT TREAT FURNACE, ELECTRIC, 2,200 DEGREE MAX., 220/1/60 S/N: 7013	🔒 Subscribe
	MARVEL	SERIES 8, MARK II	MARVEL SERIES 8, MARK II TILT FRAME VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY S/N: 826347	🔒 Subscribe
1996	SOUTHWEST INDUSTRIES	PROTOTRAK DPM	1996 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, ELECTRONIC VARIABLE SPEED DRIVE, 40 TAPER, POWER DRAWER BAR, 9" X 49" TABLE, 32" X 16" X 23" TRAVELS S/N: 96-2447	🔒 Subscribe
2010	OTC	AX21 UV0000	2010 OTC AX21 UV0000 ROBOTIC WELDER, 6 AXIS, 55.19 INCH HORIZONTAL REACH, HAND PENDANT, CONTROLLER, ROTARY FIXTURE TRUNION, WITH OTC DP400 DIGITAL INVERTER WELDING POWER SUPPLY, 400 AMP, MIG GUN S/N: L21410YZ5080401	🔒 Subscribe
1999	SOUTHWEST INDUSTRIES	PROTOTRAK SPORT 1745P	1999 SOUTHWEST INDUSTRIES PROTOTRAK SPORT 1745P CNC TOOLROOM LATHE, PROTOTRAK L2 CNC CONTROL, 17 11/16 INCH SWING, 45 INCH CENTERS, 2 INCH CAPACITY, 10 INCH 3-JAW CHUCK, ALORIS TOOL POST (NO HOLDERS) S/N: 99-87059	🔒 Subscribe
1997	SOUTHWEST INDUSTRIES	PROTOTRAK B3	1997 SOUTHWEST INDUSTRIES PROTOTRAK B3 CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER, POWER DRAWER BAR, 10 INCH X 50 INCH TABLE, 31 INCH X 17 INCH X 23.5 INCH TRAVELS S/N: 97-2920	🔒 Subscribe
	CLARK	CGC40	CLARK CGC40 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 5,375 LB. CAPACITY LISTED ON TAG, WHCIH WOULD HAVE BEEN CAPACITY WITH PAPER ROLL ATTACHMENT, ESTIMATED CAPACITY NOW WITHOUT PAPER ROLL ATTACHMENT 7,000 TO 8,000 LBS. S/N: CGC470L-U176-6086FR	🔒 Subscribe
	NATIONAL	U6-72-12	NATIONAL MODEL U6-72-12 BOX AND PAN BRAKE, 72 INCH X 12 GAUGE, COMPLETE SET OF FINGERS S/N: 455-405	🔒 Subscribe
	RELIANT		RELIANT DRYING OVEN, 8' X 8' X 25' DEPTH, GAS, DISASSEMBLED, READY TO LOAD	🔒 Subscribe
2000	SOUTHWEST INDUSTRIES	PROTOTRAK K3	2000 SOUTHWEST INDUSTRIES PROTOTRAK K3 CNC VERTICAL KNEE MILL, PROTOTRAK M2 CNC CONTROL, 10 INCH X 50 INCH TABLE, 31 INCH X 17 INCH TRAVELS, 2-AXIS, 3 HP, R-8 SPINDLE S/N: 00-BM10714	🔒 Subscribe
	POWERMATIC	511	POWERMATIC MODEL 511 PANEL SAW, 3 HP, 8 INCH BLADE, 1 1/2 INCH MAX. CUT THICKNESS, 62 INCH MAX. CROSS CUT LENGTH, UNLIMITED MAX. RIP LENGTH, 110/1/60 S/N: 0601201710	🔒 Subscribe
	MILLER	MILLERMATIC 251	MILLER MILLERMATIC 251 MIG WELDER, BUILT IN WIRE FEED, 200/230/1/60 S/N: KH140762B	🔒 Subscribe
2006	BAILEIGH	BB-4816	2006 BAILEIGH BB-4816 MAGNETIC SHEET METAL BRAKE, 48 INCH X 16 GAUGE CAPACITY, 6 TON MAGNETIC PULL, CLAMP BARS, 220/1/60 S/N: 057930057	🔒 Subscribe
1997	SOUTHWEST INDUSTRIES	PROTOTRAK DPM	1997 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER, POWER DRAWER BAR, 9 INCH X 49 INCH TABLE, 32 INCH X 16 INCH X 23 INCH TRAVELS, NOTE: NOT IN SERVICE S/N: 97-4079	🔒 Subscribe
	HYSTER	S50XL	HYSTER S50XL FORK LIFT, 5,450 LB. CAPACITY, LP, 3-STAGE MAST, HARD TIRE, SIDE SHIFT S/N: 6187V03356M	🔒 Subscribe
	CHEVALIER	FSG-2A618	CHEVALIER FSG-2A618 AUTOMATIC SURFACE GRINDER, 2-AXIS, 6 X 18 INCH, COOLANT SYSTEM, MAGNETIC CHUCK S/N: B7842002	🔒 Subscribe
	TENNSMITH	52" X 16 GAUGE	TENNSMITH 52 INCH X 16 GAUGE MANUAL FOOT SHEAR	🔒 Subscribe
	BURR BENCH	4616	BURR BENCH MODEL 4616 METAL FINISHING DEBURRER, TUB 15 5/8 DEEP X 15 1/4 WIDE X 44 1/2 LONG, WITH LID	🔒 Subscribe
	MILLER	MILLERMATIC 250	MILLER MILLERMATIC 250 MIG WELDER, BUILT IN WIRE FEED, 230/460/575/1/60 S/N: KK153726	🔒 Subscribe
	CLARK	CGS12	CLARK CGS12 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 42 INCH FORKS, 2,150 LB. CAPACITY S/N: C127-0151-9236-KOF	🔒 Subscribe
	TENNSMITH	U-48	TENNSMITH U-48, 48" X 16 GAUGE BOX AND PAN BRAKE	🔒 Subscribe
	HSQVARNA	HUS-DS-800-CB-DM-280-LS-WV	HSQVARNA CORE DRILL, MODEL HUS-DS-800-CB-DM-280-LS-WV	🔒 Subscribe
2006	COSEN	MH-1016 JA	2006 COSEN MH-1016 JA HORIZONTAL BAND SAW, 10 INCH ROUND CAPACITY, 2 HP, 1 INCH BLADE S/N: 94106156	🔒 Subscribe
	SCOTCHMAN BEWO	CPO 350 NF HA	SCOTCHMAN BEWO CPO 350 NF HA NON-FERROUS SAW, 5 HP, 14 INCH MAX. BLADE SIZE, 4 1/4 INCH ROUND CAPACITY, MITER CUT	🔒 Subscribe
	MILLER	SYNCHROWAVE 250	MILLER SYNCHROWAVE 250 TIG WELDER, WITH CHILLER AND LEADS, 200/230/460/1/60 S/N: KF904313	🔒 Subscribe
	WELLS	8	WELLS MODEL 8, 8 INCH HORIZONTAL BAND SAW, 110/1/60	🔒 Subscribe
	GREENLEE	JOB BOX	GREENLEE JOB BOX, EMPTY	🔒 Subscribe
	KNAACK	90 STORAGE MASTER	KNAACK 90 STORAGE MASTER JOB BOX, EMPTY	🔒 Subscribe
	DO-ALL	16	DO-ALL 16 VERTICAL BAND SAW, WITH (2) NEW BLADES AND NEW WHEEL BELT	🔒 Subscribe
	KALAMAZOO	C-300	KALAMAZOO MODEL C-300 COLD SAW, 12 INCH MAX. BLADE, 45 DEGREE MITER, 4 INCH ROUND CAPACITY S/N: 990212002	🔒 Subscribe
	MILLER	MILLERMATIC 135	MILLER MILLERMATIC 135 MIG WELDER, BUILT IN WIRE FEED, 110/1/60 S/N: LC583300	🔒 Subscribe
			3C COLLETS AND RACKS	🔒 Subscribe
			ARBOR PRESS, WITH FLOOR STAND	🔒 Subscribe
	POWERMATIC	33B	POWERMATIC 33B BELT SANDER, 6 INCH, 110/1/60	🔒 Subscribe
	DELTA ROCKWELL		DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60	🔒 Subscribe
			CYCLONE SAND BLAST CABINET	🔒 Subscribe
			3C COLLETS AND RACKS	🔒 Subscribe
			40 TAPER TOOL HOLDER CART WITH TOOL CHANGING BLOCK	🔒 Subscribe
	ROCKWELL	70-6X0	ROCKWELL MODEL 70-6X0 FLOOR MODEL DRILL PRESS, 20" S/N: 1763847	🔒 Subscribe
			R8 JACOBS CHUCK AND (2) R8 FACE MILLS	🔒 Subscribe
	PACKARD PRECISION	SINGLE SPINDLE	PACKARD PRECISION SINGLE SPINDLE DRILL PRESS, FLOOR MODEL, 110/1/60	🔒 Subscribe
	DELTA ROCKWELL		DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60	🔒 Subscribe
			FLAME PROOF STORAGE CABINET	🔒 Subscribe
	PROCUNIER	SINGLE SPINDLE	PROCUNIER SINGLE SPINDLE DRILL PRESS AND TAPPING MACHINE, WITH TAPPING HEAD, FLOOR MODEL	🔒 Subscribe
	KALAMAZOO	6" X 13"	KALAMAZOO 6" X 13" HORIZONTAL BAND SAW, 110/1/60	🔒 Subscribe
			DRILL BIT RACK WITH MORSE TAPER DRILLS	🔒 Subscribe
			MORSE TAPER DRILLS	🔒 Subscribe
	TAPMATIC	3JT	TAPMATIC 3JT TAPPING HEAD	🔒 Subscribe
	DELTA ROCKWELL	6"	DELTA ROCKWELL 6" BELT SANDER, 110/1/60 S/N: 688	🔒 Subscribe
			JOB BOX, EMPTY	🔒 Subscribe

LUCIFER RD7-KHE-24

LUCIFER RD7-KHE-24 HEAT TREAT FURNACE, ELECTRIC, 2,200 DEGREE MAX., 220/1/60 S/N: 7013...

MARVEL SERIES 8, MARK II

MARVEL SERIES 8, MARK II TILT FRAME VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY S/N: 826347...

1996 SOUTHWEST INDUSTRIES PROTOTRAK DPM

1996 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, ELECTRON...

2010 OTC AX21 UV0000

2010 OTC AX21 UV0000 ROBOTIC WELDER, 6 AXIS, 55.19 INCH HORIZONTAL REACH, HAND PENDANT, CONTROLLER, ...

1999 SOUTHWEST INDUSTRIES PROTOTRAK SPORT 1745P

1999 SOUTHWEST INDUSTRIES PROTOTRAK SPORT 1745P CNC TOOLROOM LATHE, PROTOTRAK L2 CNC CONTROL, 17 11/...

1997 SOUTHWEST INDUSTRIES PROTOTRAK B3

1997 SOUTHWEST INDUSTRIES PROTOTRAK B3 CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER,...

CLARK CGC40

CLARK CGC40 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 5,375 LB. CAPACITY LISTED ON TAG, WHCIH W...

NATIONAL U6-72-12

NATIONAL MODEL U6-72-12 BOX AND PAN BRAKE, 72 INCH X 12 GAUGE, COMPLETE SET OF FINGERS S/N: 455-405...

RELIANT

RELIANT DRYING OVEN, 8' X 8' X 25' DEPTH, GAS, DISASSEMBLED, READY TO LOAD...

2000 SOUTHWEST INDUSTRIES PROTOTRAK K3

2000 SOUTHWEST INDUSTRIES PROTOTRAK K3 CNC VERTICAL KNEE MILL, PROTOTRAK M2 CNC CONTROL, 10 INCH X 5...

POWERMATIC 511

POWERMATIC MODEL 511 PANEL SAW, 3 HP, 8 INCH BLADE, 1 1/2 INCH MAX. CUT THICKNESS, 62 INCH MAX. CROS...

MILLER MILLERMATIC 251

MILLER MILLERMATIC 251 MIG WELDER, BUILT IN WIRE FEED, 200/230/1/60 S/N: KH140762B...

2006 BAILEIGH BB-4816

2006 BAILEIGH BB-4816 MAGNETIC SHEET METAL BRAKE, 48 INCH X 16 GAUGE CAPACITY, 6 TON MAGNETIC PULL, ...

1997 SOUTHWEST INDUSTRIES PROTOTRAK DPM

1997 SOUTHWEST INDUSTRIES PROTOTRAK DPM CNC VERTICAL BED MILL, PROTOTRAK AGE-3 CNC CONTROL, 40 TAPER...

HYSTER S50XL

HYSTER S50XL FORK LIFT, 5,450 LB. CAPACITY, LP, 3-STAGE MAST, HARD TIRE, SIDE SHIFT S/N: 6187V03356M...

CHEVALIER FSG-2A618

CHEVALIER FSG-2A618 AUTOMATIC SURFACE GRINDER, 2-AXIS, 6 X 18 INCH, COOLANT SYSTEM, MAGNETIC CHUCK S...

TENNSMITH 52" X 16 GAUGE

TENNSMITH 52 INCH X 16 GAUGE MANUAL FOOT SHEAR...

BURR BENCH 4616

BURR BENCH MODEL 4616 METAL FINISHING DEBURRER, TUB 15 5/8 DEEP X 15 1/4 WIDE X 44 1/2 LONG, WITH LI...

MILLER MILLERMATIC 250

MILLER MILLERMATIC 250 MIG WELDER, BUILT IN WIRE FEED, 230/460/575/1/60 S/N: KK153726...

CLARK CGS12

CLARK CGS12 FORK LIFT, LP, HARD TIRE, SIDE SHIFT, 2-STAGE, 42 INCH FORKS, 2,150 LB. CAPACITY S/N: C1...

TENNSMITH U-48

TENNSMITH U-48, 48" X 16 GAUGE BOX AND PAN BRAKE...

HSQVARNA HUS-DS-800-CB-DM-280-LS-WV

HSQVARNA CORE DRILL, MODEL HUS-DS-800-CB-DM-280-LS-WV...

2006 COSEN MH-1016 JA

2006 COSEN MH-1016 JA HORIZONTAL BAND SAW, 10 INCH ROUND CAPACITY, 2 HP, 1 INCH BLADE S/N: 94106156...

SCOTCHMAN BEWO CPO 350 NF HA

SCOTCHMAN BEWO CPO 350 NF HA NON-FERROUS SAW, 5 HP, 14 INCH MAX. BLADE SIZE, 4 1/4 INCH ROUND CAPACI...

MILLER SYNCHROWAVE 250

MILLER SYNCHROWAVE 250 TIG WELDER, WITH CHILLER AND LEADS, 200/230/460/1/60 S/N: KF904313...

WELLS 8

WELLS MODEL 8, 8 INCH HORIZONTAL BAND SAW, 110/1/60...

GREENLEE JOB BOX

GREENLEE JOB BOX, EMPTY...

KNAACK 90 STORAGE MASTER

KNAACK 90 STORAGE MASTER JOB BOX, EMPTY...

DO-ALL 16

DO-ALL 16 VERTICAL BAND SAW, WITH (2) NEW BLADES AND NEW WHEEL BELT...

KALAMAZOO C-300

KALAMAZOO MODEL C-300 COLD SAW, 12 INCH MAX. BLADE, 45 DEGREE MITER, 4 INCH ROUND CAPACITY S/N: 9902...

MILLER MILLERMATIC 135

MILLER MILLERMATIC 135 MIG WELDER, BUILT IN WIRE FEED, 110/1/60 S/N: LC583300...

3C COLLETS AND RACKS

ARBOR PRESS, WITH FLOOR STAND

POWERMATIC 33B

POWERMATIC 33B BELT SANDER, 6 INCH, 110/1/60...

DELTA ROCKWELL

DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60...

CYCLONE SAND BLAST CABINET

3C COLLETS AND RACKS

40 TAPER TOOL HOLDER CART WITH TOOL CHANGING BLOCK

ROCKWELL 70-6X0

ROCKWELL MODEL 70-6X0 FLOOR MODEL DRILL PRESS, 20" S/N: 1763847...

R8 JACOBS CHUCK AND (2) R8 FACE MILLS

PACKARD PRECISION SINGLE SPINDLE

PACKARD PRECISION SINGLE SPINDLE DRILL PRESS, FLOOR MODEL, 110/1/60...

DELTA ROCKWELL

DELTA ROCKWELL 6 INCH BELT SANDER, 110/1/60...

FLAME PROOF STORAGE CABINET

PROCUNIER SINGLE SPINDLE

PROCUNIER SINGLE SPINDLE DRILL PRESS AND TAPPING MACHINE, WITH TAPPING HEAD, FLOOR MODEL...

KALAMAZOO 6" X 13"

KALAMAZOO 6" X 13" HORIZONTAL BAND SAW, 110/1/60...

DRILL BIT RACK WITH MORSE TAPER DRILLS

MORSE TAPER DRILLS

TAPMATIC 3JT

TAPMATIC 3JT TAPPING HEAD...

DELTA ROCKWELL 6"

DELTA ROCKWELL 6" BELT SANDER, 110/1/60 S/N: 688...

JOB BOX, EMPTY

1 2 Next >>

Recent Searches

Login

Reset Password

CR Machine Fabrication

Save to Project Folder

Print Options

Unlock Unlimited Printing