Surplus Equipment to Ongoing Operation of Local Manufacturing Facility
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
31
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
JET | JRD-939 |
JET JRD-939 RADIAL ARM DRILLING MACHINE; DRILL CAPACITY 1-9/16", IN MILD STEEL; COLUMN DIAMETER 7/16";SPINDLE TRAVEL ON ARM 39 3/8" ; T SLOTTED BLOCK DIMENSIONS 17" X 31"; 3PH 3 HP
|
🔒 Subscribe | |
|
|
BURGMASTER | MULTI SPINDLE DRILL |
BURGMASTER MULTI SPINDLE DRILL WITH (3) 50X TAPMATIC TAPPING HEADS. MACHINE DOES NOT RUN, MISSING MOTOR. FOR PARTS, COMES WITH PNUEMATIC VISE AND PNUEMATIC EXPANDING ARBOR FIXTURE.
|
🔒 Subscribe | |
|
|
ITW MIMA | COBRA 3 |
ACCU STRETCH-STRETCH FILM DELIVERY SYSTEM COBRA 3 ITW MIMA; MACHINE WAS IN WORKING CONDITION WHEN REMOVED FROM SERVICE
|
🔒 Subscribe | |
|
|
24" DIAMETER ROTARY TABLE AND 20" DIAMETER ROTARY TABLE
|
🔒 Subscribe | |||
|
|
GARDNER DENVER | EBEQGC |
GARDNER DENVER EBEQGC SCROLL COMPRESSOR; 30HP S/N: M39129; NONWORKING- FOR PARTS OR REBUILD
|
🔒 Subscribe | |
|
|
MILLER | SYNCHROWAVE 500AC/DC |
MILLER SYNCHROWAVE 500AC/DC GAS TUNGSTEN-ARC OR SHIELDED METAL ARC WELDING POWER SOURCE; SINGLE PHASE 230/460V
|
🔒 Subscribe | |
|
|
OSTER | 601WD |
OSTER 601WD TURET LATHE; USES WARNER SWASEY DEAD STOP COLLET PADS;6 SETS COLLET PADS S/N: FK1504
|
🔒 Subscribe | |
|
|
2000 | HAAS | SERVO BAR 300 |
2000 HAAS SERVO BAR 300 FEEDER FOR CNC LATHE S/N: 90236; BAR FEEDER WAS REMOVED FROM WORKING SERVICE
|
🔒 Subscribe |
|
|
FEDEK | DH65 |
FEDEK DH65 BAR FEEDER FOR CNC LATHE 220 VOLT, SINGLE PHASE S/N: 14310503
|
🔒 Subscribe | |
|
|
TENNANT | B10 |
TENNANT B10 FLOOR MACHINE. METER READS 646.7 HOURS. HAS TRUE-HEPA 4 STAGE FILTRATION
|
🔒 Subscribe | |
|
|
FEDEK | DH65 |
FEDEK DH65 BAR FEEDER FOR CNC LATHE 220 VOLT, SINGLE PHASE S/N: 14310603
|
🔒 Subscribe | |
|
|
AMERICAN HOLE WIZARD |
AMERICAN HOLE WIZARD RADIAL ARM DRILL; 4' ARM 11" COLUMN 18" X 24" BLOCK
|
🔒 Subscribe | ||
|
|
2 END MILL SHARPENING FIXTURES, TOOL CUTTER GRINDER TAILSTOCKS, MISCELLANEOUS INDEXING FIXTURES.
|
🔒 Subscribe | |||
|
|
TOOL CUTTER GRINDER MOTORIZED WORK HEAD, MISCELLANEOUS GRINDING FIXTURES AND INDEXING FIXTURES. WELDON AIR DRAW BAR IN CASE. PALLET FULL.
|
🔒 Subscribe | |||
|
|
TOOL CUTTER GRINDER VISES AND INDEXING FIXTURES. 2 WELDON AIR DRAW BARS. OTHER MISCELLANEOUS.
|
🔒 Subscribe | |||
|
|
KENNAMETAL AND OTHER BRANDS |
50 TAPER HOLDERS. KENNAMETAL AND OTHER BRANDS QUICK CHANGE END & COLLET STYLE. MOST HAVE RETENTION KNOB.
|
🔒 Subscribe | ||
|
|
HARDINGE | 59 |
HARDINGE 59 SPLIT BED; WORKING CONDITION UNKNOWN; BAT HANDLE SLIDE AND TURRET WITH PNUEMATIC TAIL STOCK. GOOD PARTS MACHINE, OR GOOD CABINET FOR TABLE TOP LATHE.
|
🔒 Subscribe | |
|
|
GEO. T. SCHMIDT | 3T |
GEO. T. SCHMIDT 3T MARKING TOOL ELECTRIC/PNUEMATIC; WORKING CONDITION UNKNOWN
|
🔒 Subscribe | |
|
|
BLOWER FILTRATION SYSTEM ON CASTERS WITH 8" OPENING; WITH CHARCOAL PLATE AND FILTERS
|
🔒 Subscribe | |||
|
|
CUSTOM TANK TURNING PIPE ROLL DRIVER WELDING ROLLER. DAYTON CONTROL MOTOR DAMAGED NEEDS REPAIR.
|
🔒 Subscribe | |||
|
|
PEERLESS MACHINE COMPANY | MECHANI-CUT 7" X 7" |
PEERLESS MACHINE COMPANY MECHANI-CUT 7" X 7" POWER HACK SAW 220V 3 PHASE.
|
🔒 Subscribe | |
|
|
LANDIS | STATIONARY TYPE COLLAPSING TAPS |
LANDIS STATIONARY TYPE COLLAPSING TAPS
|
🔒 Subscribe | |
|
|
ACME | DTGB0934S |
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266
|
🔒 Subscribe | |
|
|
ACME | DTGB0934S |
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266
|
🔒 Subscribe | |
|
|
ACME | DTGB0934S |
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266
|
🔒 Subscribe | |
|
|
ACME | DTGB0934S |
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA SECONDARY VOLTS 460 Y/266
|
🔒 Subscribe | |
|
|
MORISEKI |
TURRETT TOOLING FOR LARGE MORISEKI CNC; SOME PIECES NEW STILL IN PACKAGING
|
🔒 Subscribe | ||
|
|
SPLINE BROACHES ON ROLL AROUND CART APPROXIMATLEY 50 + BROACHES TOTAL
|
🔒 Subscribe | |||
|
|
HYPERTHERM | HD 1070 |
HYPERTHERM HD 1070 PLASMA CUTTING SYSTEM WITH MESSER PILOT CONTROLLER AND SERVOS, WITH LEADS, TORCH HEAD
|
🔒 Subscribe | |
|
|
ALZMETALL | AC 32 |
ALZMETALL AC 32 CUSTOM DRILL PRESS/SAW; WORKED WHEN REMOVED FROM SERVICE.
|
🔒 Subscribe | |
|
|
KELLY | HULK |
KELLY HULK HYDRAULIC DOCK LIFT, 10,000 LB CAPACITY; 6X8' PLATFORM WITH HYDRAULIC UNIT; INSIDE RAILING IS 64" WIDE, 42" TALL GUARDRAIL ON BOTH SIDES; THIS DOCK LIFT IS MEANT TO BE PIT MOUNTED APPROX 16" DEEP TO TAKE IT TO GROUND LEVEL. WILL LIFT APPROX 5 FT HIGH. THE BOTTOM MOUNTING ANGLE DOES HAVE SOME SPOTS OF SIGNIFICANT RUST. LIFT WAS IN WORKING CONDITION WHEN REMOVED FROM SERVICE.
|
🔒 Subscribe |
JET JRD-939
METALWORKING & FABRICATION EQUIPMENT
JET JRD-939 RADIAL ARM DRILLING MACHINE; DRILL CAPACITY 1-9/16", IN MILD STEEL; COLUMN DIAMETER 7/16...
Hammer Price:
🔒
BURGMASTER MULTI SPINDLE DRILL
METALWORKING & FABRICATION EQUIPMENT
BURGMASTER MULTI SPINDLE DRILL WITH (3) 50X TAPMATIC TAPPING HEADS. MACHINE DOES NOT RUN, MISSING MO...
Hammer Price:
🔒
ITW MIMA COBRA 3
PACKAGING EQUIPMENT
ACCU STRETCH-STRETCH FILM DELIVERY SYSTEM COBRA 3 ITW MIMA; MACHINE WAS IN WORKING CONDITION WHEN RE...
Hammer Price:
🔒
GARDNER DENVER EBEQGC
AIR COMPRESSORS
GARDNER DENVER EBEQGC SCROLL COMPRESSOR; 30HP S/N: M39129; NONWORKING- FOR PARTS OR REBUILD...
Hammer Price:
🔒
MILLER SYNCHROWAVE 500AC/DC
WELDING & CUTTING
MILLER SYNCHROWAVE 500AC/DC GAS TUNGSTEN-ARC OR SHIELDED METAL ARC WELDING POWER SOURCE; SINGLE PHAS...
Hammer Price:
🔒
OSTER 601WD
METALWORKING & FABRICATION EQUIPMENT
OSTER 601WD TURET LATHE; USES WARNER SWASEY DEAD STOP COLLET PADS;6 SETS COLLET PADS S/N: FK1504...
Hammer Price:
🔒
2000 HAAS SERVO BAR 300
CNC MACHINE CENTERS
2000 HAAS SERVO BAR 300 FEEDER FOR CNC LATHE S/N: 90236; BAR FEEDER WAS REMOVED FROM WORKING SERVICE...
Hammer Price:
🔒
FEDEK DH65
CNC MACHINE CENTERS
FEDEK DH65 BAR FEEDER FOR CNC LATHE 220 VOLT, SINGLE PHASE S/N: 14310503...
Hammer Price:
🔒
TENNANT B10
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
TENNANT B10 FLOOR MACHINE. METER READS 646.7 HOURS. HAS TRUE-HEPA 4 STAGE FILTRATION...
Hammer Price:
🔒
FEDEK DH65
CNC MACHINE CENTERS
FEDEK DH65 BAR FEEDER FOR CNC LATHE 220 VOLT, SINGLE PHASE S/N: 14310603...
Hammer Price:
🔒
AMERICAN HOLE WIZARD
METALWORKING & FABRICATION EQUIPMENT
AMERICAN HOLE WIZARD RADIAL ARM DRILL; 4' ARM 11" COLUMN 18" X 24" BLOCK...
Hammer Price:
🔒
MISC
2 END MILL SHARPENING FIXTURES, TOOL CUTTER GRINDER TAILSTOCKS, MISCELLANEOUS INDEXING FIXTURES....
Hammer Price:
🔒
MISC
TOOL CUTTER GRINDER MOTORIZED WORK HEAD, MISCELLANEOUS GRINDING FIXTURES AND INDEXING FIXTURES. WELD...
Hammer Price:
🔒
MISC
TOOL CUTTER GRINDER VISES AND INDEXING FIXTURES. 2 WELDON AIR DRAW BARS. OTHER MISCELLANEOUS....
Hammer Price:
🔒
KENNAMETAL AND OTHER BRANDS
MISC
50 TAPER HOLDERS. KENNAMETAL AND OTHER BRANDS QUICK CHANGE END & COLLET STYLE. MOST HAVE RETENTION K...
Hammer Price:
🔒
HARDINGE 59
METALWORKING & FABRICATION EQUIPMENT
HARDINGE 59 SPLIT BED; WORKING CONDITION UNKNOWN; BAT HANDLE SLIDE AND TURRET WITH PNUEMATIC TAIL ST...
Hammer Price:
🔒
GEO. T. SCHMIDT 3T
MISC
GEO. T. SCHMIDT 3T MARKING TOOL ELECTRIC/PNUEMATIC; WORKING CONDITION UNKNOWN...
Hammer Price:
🔒
MISC
BLOWER FILTRATION SYSTEM ON CASTERS WITH 8" OPENING; WITH CHARCOAL PLATE AND FILTERS...
Hammer Price:
🔒
MISC
CUSTOM TANK TURNING PIPE ROLL DRIVER WELDING ROLLER. DAYTON CONTROL MOTOR DAMAGED NEEDS REPAIR....
Hammer Price:
🔒
PEERLESS MACHINE COMPANY MECHANI-CUT 7" X 7"
WOODWORKING EQUIPMENT
PEERLESS MACHINE COMPANY MECHANI-CUT 7" X 7" POWER HACK SAW 220V 3 PHASE....
Hammer Price:
🔒
LANDIS STATIONARY TYPE COLLAPSING TAPS
METALWORKING & FABRICATION EQUIPMENT
LANDIS STATIONARY TYPE COLLAPSING TAPS...
Hammer Price:
🔒
ACME DTGB0934S
ELECTRICAL AND POWER GENERATION EQUIPMENT
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266...
Hammer Price:
🔒
ACME DTGB0934S
ELECTRICAL AND POWER GENERATION EQUIPMENT
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266...
Hammer Price:
🔒
ACME DTGB0934S
ELECTRICAL AND POWER GENERATION EQUIPMENT
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA; SECONDARY VOLTS 460 Y/266...
Hammer Price:
🔒
ACME DTGB0934S
ELECTRICAL AND POWER GENERATION EQUIPMENT
93 KVA ACME DTGB0934S 3 PHASE TRANSFORMER; PRIMARY VOLTS 460 DELTA SECONDARY VOLTS 460 Y/266...
Hammer Price:
🔒
MORISEKI
CNC MACHINE CENTERS
TURRETT TOOLING FOR LARGE MORISEKI CNC; SOME PIECES NEW STILL IN PACKAGING...
Hammer Price:
🔒
HYPERTHERM HD 1070
WELDING & CUTTING
HYPERTHERM HD 1070 PLASMA CUTTING SYSTEM WITH MESSER PILOT CONTROLLER AND SERVOS, WITH LEADS, TORCH ...
Hammer Price:
🔒
ALZMETALL AC 32
METALWORKING & FABRICATION EQUIPMENT
ALZMETALL AC 32 CUSTOM DRILL PRESS/SAW; WORKED WHEN REMOVED FROM SERVICE....
Hammer Price:
🔒
KELLY HULK
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
KELLY HULK HYDRAULIC DOCK LIFT, 10,000 LB CAPACITY; 6X8' PLATFORM WITH HYDRAULIC UNIT; INSIDE RAILIN...
Hammer Price:
🔒