Full Service Production Molding Auction

LEBLOND 15X40 ENGINE LATHE SPECIFICATIONS: SWING OVER BED 15" SWING OVER CROSS SLIDE 9" BETWEEN CENTERS 40" SPINDLE BORE 1-3/8" SPINDLE NOSE L0 SPINDLE SPEED 45 - 1800 RPM TAILSTOCK TAPER MT#3 MAIN MOTOR 5 HP WEIGHT (G.W) 2,500 LBS EQUIPPED WITH: DIGITAL READ OUT, 8" 3 JAW MANUAL CHUCK, TAILSTOCK, CHIP PAN,

2002 C6246X1500 ENGINE LATHE SPECIFICATIONS: SWING OVER BED DIA. 460MM SWING OVER CROSS SLIDE DIA. 275MM SWING IN GAP DIA. 690MM BETWEEN CENTERS 1500MM WIDTH OF BED 300MM SPINDLE BORE DIA. 80MM RANGE OF SPINDLE SPEED 12 CHANGES SPINDLE SPEED 25-2000RPM TAILSTOCK TRAVEL SLEEVE 120MM TAILSTOCK TAPER MT#4 MAIN MOTOR 5.5HP (*7.5HP) WEIGHT (G.W) 1980KG / 2320KG

1999 MITSUBISHI EA8 SINKER EDM SPECIFICATIONS: TANK SIZE: 30.3" X 19.6" X 9.8" TABLE SIZE: 19.6" X 13.7" MAX TABLE LOAD: 1,210 LBS. TRAVELS (X/Y/Z): 11.8" X 9.8" X 9.8" SPINDLE C-AXIS POSITIONING: FULL C-AXIS (.001 DEGREE) PROGRAMMABLE GENERATOR OUTPUT: 60 AMPS MACHINE DIMENSIONS (LXWXH): 64" X 68" X 80" FLOOR SPACE REQUIRED: 96" X 94" X 80" MACHINE WEIGHT: 3,080 LBS ELECTRICAL REQUIREMENTS: 200-220V/3PHZ/8KVA EQUIPPED WITH: MITSUBISHI C21EA CONTROL, FP60EA 60 AMP POWER SUPPLY, C-AXIS PROGRAMMABLE, AUTOMATIC LUBRICATION, DI ELECTRIC CHILLER, FIRE EXT SYSTEM, HANDHELD PENDANT

2000 LAGUN FTV-1 VERTICAL MILL SPECIFICATIONS: TABLE AREA : 42" X 9" LONGITUDINAL TRAVEL: 29-1/2" CROSS TRAVEL: 16" MAXIMUM VERTICAL CAPACITY: 18-1/2" VERTICAL KNEE TRAVEL: 16" RAM TRAVEL: 22-3/16" T-SLOTS NUMBER, SIZE & DISTANCE BETWEEN (3). 5/8" @ 2-1/2" SPINDLE SPEEDS INFINITELY VARIABLE : 55 - 4250 RPM HEAD MOVES RIGHT AND LEFT: : 90 DEGREES HEAD TILTS, FRONT AND BACK: : 45 DEGREES FEEDS: : .003" - .0015: - .006" SPINDLE TAPER: : R-8 QUILL DIAMETER: : 3-3/8" QUILL TRAVELS: : 5" DISTANCE, COLUMN FACE TO SPINDLE CENTER:5-5/16" MIN. COLUMN FACE TO SPINDLE CENTER 30-1/2" MAX. MAX. DISTANCE SPINDLE TO TABLE TOP:18-1/2" OVERALL SIZE: : 63"X 80"X 83"H APPROXIMATE WEIGHT: : 2,750 LBS. EQUIPPED WITH: DIGITAL READ OUT, VICE NOT INCLUDED

1997 FREJOTH 942V VERTICAL MILLTABLE DIMENSIONS (OVERALL, W X L): 9" X 42"TABLE WORKING SURFACE, W X L: 9" X 42"LONGITUDINAL TABLE TRAVEL (X-AXIS): 30"CROSS SADDLE TRAVEL (Y-AXIS):12-1/2"VERTICAL KNEE TRAVEL (W-AXIS): 16"VERTICAL HEAD TRAVEL (Z-AXIS):5"SPINDLE TAPER: R-8RAM TRAVEL: 12-14"SPINDLE SPEEDS (8), RANGE:60-4200 RPMDRIVE TYPE: VARIABLE SPEED MOTOR (SPINDLE): 3 HPELECTRICS:220/440/3/60APPROXIMATE MACHINE DIMENSIONS: 60" X 48"APPROXIMATE MACHINE HEIGHT: 78"APPROXIMATE MACHINE WEIGHT: 2200 LBS.EQUIPPED WITH: DIGITAL READ OUT **VICE NOT INCLUDED

1986 ABA FFU 1000/50 SURFACE GRINDER SPECIFICATIONS: GRINDING LENGTH: 1.000 MM. GRINDING WIDTH: 500 MM. WORKPIECE HEIGHT 550 MM. GRINDING HEIGHT 550 MM. WHEEL DIMENSIONS: 350 X MAX. 80 X 127 MM. TABLE CLAMPING SURFACE 1420 X 400 MM. MAXIMUM ADMITTED LOAD: 600 KG. TABLE LONGITUDINAL TRAVEL MIN./MAX. 150/1.050 MM. TRANSVERSAL TRAVEL 450 MM. VERTICAL TRAVEL 580 MM. GRINDING SPINDLE SPEED 1.460 RPM. INFINITELY VARIABLE VERTICAL SPEED. TABLE SPEED STEPLESS - 3 - 30 M/MIN. FEEDING SPEED: 1,5 - 5 M/MIN. GRINDING WHEELS HOLDER HEAD WITH NITRIDED SPINDLE AND AUTOMATIC LUBRICATION. TALADRINE PUMP: 100 L/MIN. DIMENSIONS: L 3,38 M. X W 1,8 M. X H 2, 39 M.

REGENT 1024 AHD SURFACE GRINDER SPECIFICATIONS: GRINDING AREA 12 X 28 SPINDLE TO TABLE MAX. 19.5 TABLE SPEEDS TO 80 FPM INFEED 0 5/8 PER STROKE GRINDING MOTOR 5 HP 220/440 VOLT 3 PHASE INCREMENTAL .001 .001 WHEEL SIZE 14 X 2 X 5 WEIGHT 5000 LBS 10 X 24 KANETSU ELECTROMAGNETIC CHUCK WITH CONTROLS INCREMENTAL DOWN FEED WITH SPARK OUT COOLANT OVER THE WHEEL DRESSER BALL SCREW ON THE CROSS FEED

KENT KGS-250AH GRINDER SPECIFICATIONS: TABLE TRAVEL: 20" SADDLE TRAVEL: 10" SPINDLE TO TABLE TOP: 21" HYDRAULIC X & Y-AXIS 8" MAX DIAMETER WHEEL DUST COLLECTOR UNIT 3 HP SPINDLE MOTOR 220/440 VOLT 3PH