Jacob A Weaver Co 1205 Guys Mills PA

Bright Star Auctions

Category: MISC

Total Lots: 155

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 155 lots

Year	Make	Model	Lot Description	Hammer Price
	NICHOLSON	A1-27	NICHOLSON A1-27 RING DEBARKER, 6 ARMS, HYDRAULIC ROLLER TENSIONER ARMS, HYDRAULIC FEED ROLLS, JOYSTICK CONTROLS, 30 LOG CAPACITY. HEAD DRIVEN BY ELECTRIC, POWER PACK INCLUDED. CONTROLS IN CAB (CAB NOT INCLUDED). NICHOLSON · A1-27	🔒 Subscribe
	SHARP	2 HEAD	SHARP 2 HEAD SHARP CHAIN SCRAGG MILL, ELECTRIC DRIVE, 48 INCH CIRCLE BLADE, 14 X 40 OVERALL MACHINE MEASUREMENT, SETWORKS, INCLUDES HYDRAULIC UNIT & CONTROLS, SAWYERS CAB WITH COMPUTERIZED CONTROL SYSTEM, LOG CAPACITY 24 X 11', CONVERTED FROM END DOGGING SCRAGG TO SHARP CHAIN TYPE, A GOOD WORKING MACHINE. SHARP · 2 HEAD	🔒 Subscribe
2010	BREWER	3HD D.E.	2010 BREWER 3 HEAD RESAW, 40 HP ELECTRIC ON HEADS, AUTOMATIC LUBE SYSTEM, INCLUDES HYD PAKS, GOOD CONDITION, BLADE SIZE: 4 INCH, BLADE TENSION: AIR, CUT CAPACITY: 16 X 16 INCH, OVERALL DIMENSIONS: 11 X 21 FT, WHEEL SIZE: 3.5 X 40 INCH, GUIDE TYPE: BLOCK S/N: 10 0610 2010 · BREWER · 3HD D.E.	🔒 Subscribe
	KEYSTONE MACHINERY		KEYSTONE MACHINERY GANG SAW, LINE-SHAFT DRIVE TYPE, BOTH POWER FEED ROLLS, CIRCLE BLADE TYPE, POWERED INFEED, 6 X 12 CAPACITY, SPRING HOLD DOWN SYSTEM, DUAL ARBOR WITH SIZER HEAD KEYSTONE MACHINERY	🔒 Subscribe
1999	WEST PLAINS	WPRS-WBS	1999 WEST PLAINS WPRS-WBS RESAW, 4 HEADS, 12" WIDTH CAPACITY, 40 HP MOTORS, ELECTRIC DRIVE, MANUAL BLADE TENSION, BLOCK GUIDE TYPE, 3.75 X 42 WHEEL SIZE, 25 EXTRA RESHARPENED BANDS. BAND WHEELS HAVE BEEN REDRESSED, STEEL WEB FEED THRU. GOOD CONDITION. NOT CURRENTLY SETUP. READY TO BE LOADED. S/N: 146 1999 · WEST PLAINS · WPRS-WBS	🔒 Subscribe
	STROM	Oct-72	STROM 10-72 MERCHANDISING SAW, 6 SWING ARM SAW BLADE, 75 HP. ELECTRIC DRIVE, CONTROLS IN CAB S/N: 1028 STROM · Oct-72	🔒 Subscribe
1983	CORLEY	801294	1983 CORLEY 801294 EDGER, ELECTRIC DRIVE, 4 CIRCLE BLADES (4 STATIONARY), 6 X 48 CUT CAPACITY, LASERS, STATIONARY SET UP, SAW DUST BELT S/N: E-648-16 1983 · CORLEY · 801294	🔒 Subscribe
	KMC	TRANSFER DECK	KMC TRANSFER DECK, HYDRAULIC DRIVE TYPE, 3 STRANDS, NO STOP'N'LOAD, 92X31X36HIGH SIZE, LINK CHAIN TYPE KMC · TRANSFER DECK	🔒 Subscribe
	JOHN DEERE	4045TF250A	JOHN DEERE 4045TF250A POWER UNIT, 4 CYLINDER, DIESEL, 125 HORSEPOWER, 12 VOLTAGE, CLUTCH, METER READS: 7109 S/N: 917578 JOHN DEERE · 4045TF250A	🔒 Subscribe
	KMC	CANT SIZER	KMC CANT SIZER, HYDRAULIC DRIVE, VERTICAL AND HORIZONTAL 1-15/16 ARBORS, 10 INFEED, FOOT PEDAL OPERATED KMC · CANT SIZER	🔒 Subscribe
	CARDINAL		CARDINAL LOG DECK, HYDRAULIC DRIVE TYPE, 4 DECK STRANDS, NO STOP'N'LOAD, 13X30X52HIGH SIZE, LINK CAN-AM CHAIN TYPE CARDINAL	🔒 Subscribe
	KEYSTONE MACHINERY		KEYSTONE MACHINERY GANG SAW BLADES AND COLLARS, SAW COLLARS FROM 3/8 TO 1 15/16 WITH 2 3/8 ARBOR, SAW BLADES 12 WITH 2 3/8 ARBOR, APPROX 100 10 AND 100 12 SAW BLADES KEYSTONE MACHINERY	🔒 Subscribe
	KEYSTONE MACHINERY	DAUL HEAD	KEYSTONE MACHINERY DAUL HEAD NOTCHER, LINE-SHAFT DRIVE TYPE, DOUBLE HEADS, HYDRAULIC PUSHER ARMS INFEED, 82 LENGTH CAPACITY, INDEXABLE TEETH ON HEAD S/N: KEYSTONE MACHINERY · DAUL HEAD	🔒 Subscribe
			APPROX. 84 PCS. 2 X 2 X 6, MAY BE A FEW 1/2 BLOCKS.	🔒 Subscribe
	JOHN DEERE	6081AF001	JOHN DEERE 6081AF001 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, METER READS 1705.4, 12 VOLTAGE, CLUTCH: YES, EXHAUST PIPE, RUNS GOOD S/N: RG6081A110857 JOHN DEERE · 6081AF001	🔒 Subscribe
	KEYSTONE MACHINERY	MANUAL	KEYSTONE MACHINERY MANUAL CHOP SAW, LINESHAFT BLADE DRIVE, 24 INCH BLADE SIZE, MANUAL BLADE UP/DOWN, 4 X 12 CUT CAPACITY, 20 X 10 INFEED, 20 X 8 OUTFEED, MATERIAL STOPS ON OUTFEED, INCLUDES LINESHAFT AND GEARBOX KEYSTONE MACHINERY · MANUAL	🔒 Subscribe
	MORBARK		INFEED LOG TROUGH, HYDRAULIC DRIVE TYPE, 38 X 20 SIZE, 42 OVERALL WIDTH, 14 PAN WIDTH, LADDERBACK CHAIN TYPE, SHOP BUILT, GOOD TROUGH, SUPPORTS TO GROUND MORBARK	🔒 Subscribe
2000	DEUTZ	BF6L913C	2000 DEUTZ BF6L913C POWER UNIT, 177 HP DIESEL, ROCKFORD CLUTCH, RUNS AND OPERATES 2000 · DEUTZ · BF6L913C	🔒 Subscribe
	KMC	CANT SIZER	KMC CANT SIZER, VERTICAL AND HORIZONTAL SHAFTS, HYDRAULIC DRIVE, DIMENSIONS 45 X 67 X 61 HIGH KMC · CANT SIZER	🔒 Subscribe
			TRANSFER DECK, 8X20 OVERALL DIMENSIONS, 4 STRANDS, LINK CHAIN TYPE, 8 EXTENSION POP-UP ON THE END	🔒 Subscribe
	WINSTON MACHINERY	LOG DECK	WINSTON MACHINERY LOG DECK, ELECTRIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 4 STRANDS, STOP'N'LOAD, SIZE: 17 X 216 X 92. HEAVY DUTY DECK, SUPPORT TO GROUND. WINSTON MACHINERY · LOG DECK	🔒 Subscribe
	TIPTON IRONWORKS	SCRAGG MILL	TIPTON IRONWORKS SCRAGG MILL, SHARP CHAIN SCRAGG, TWO HEAD, CIRCLE BLADE, 11 X 196, OVERALL DIMENSIONS 196 X 7 X 80 HIGH, BLADES NOT INCLUDED S/N: TIW MS 1004 TIPTON IRONWORKS · SCRAGG MILL	🔒 Subscribe
	LINCOLN	RANGER 10,000	LINCOLN RANGER 10,000 WELDER, METER READS 2,855 HOURS, KOHLER GAS ENGINE, APPROXIMATELY 50' OF LEAD INCLUDED, NEEDS NEW BATTERY, RUNS AND OPERATES LINCOLN · RANGER 10,000	🔒 Subscribe
	MORBARK		MORBARK VIBRATING CONVEYOR, 30 INCH PAN WIDTH, 5 INCH SLANTED SIDES, 10 HP ELECTRIC MOTOR S/N: MORBARK	🔒 Subscribe
	BIGASS FAN		BIGASS FAN S/N: MUES-23250-003-01 BIGASS FAN	🔒 Subscribe
	DEUTZ	F6L 912	DEUTZ F6L 912 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, 1121 METER READS, 94 HORSEPOWER, NO CLUTCH S/N: 5042758 DEUTZ · F6L 912	🔒 Subscribe
	SHOP BUILT	NA	EDGER, ELECTRIC DRIVE, 1 BLADE (1 STATIONARY), CIRCLE BLADE TYPE, 8X22 CUT CAPACITY, 30X7 INFEED MEASUREMENT, 2-15/16 ARBOR SIZE, LASERS, STATIONARY SET UP, SLAB DROP OFF POCKET, 24 BLADE, NEW BUT NEVER USED, CONTROL BOX SHOP BUILT · NA	🔒 Subscribe
			16 NEW HYDRAULIC CYLINDERS, 2 USED HYDRAULIC CYLINDERS	🔒 Subscribe
	MORBARK		OUTFEED LOG TROUGH WITH KICKERS, MAKE: MORBARK. DRIVE TYPE: HYDRAULIC. SIZE: 52 X 20. OVERALL WIDTH: 7. PAN WIDTH: 14. LOG KICKERS: YES. CHAIN TYPE: LADDERBACK. 3 KICKER ARMS, KICKER JOINTS SHOW SOME WEAR, SUPPORT TO GROUND MORBARK	🔒 Subscribe
	UNKNOWN		ROLLCASE WITH POP-UP TRANSFER, HYDRAULIC DRIVE TYPE, 12 INCH ROLL SPACING, 6X24 INCH ROLLER SIZE, 54X11'5 INCH OVERALL DIMENSIONS. POP UP TRANSFER IS POWERED BY A GENERAL PURPOSE 3/4 HP 3 PHASE ELECTRIC MOTOR. UNKNOWN	🔒 Subscribe
	KMC	LIVE ROLLCASE	KMC LIVE ROLLCASE, HYDRAULIC DRIVE TYPE, 15 ROLL SPACING, 6X12 ROLLER SIZE, 22X15X36HIGH OVERALL DIMENSIONS, 1-1/4 SHAFT SIZE, DOTTED ROLLERS KMC · LIVE ROLLCASE	🔒 Subscribe
	MILLER	SPECTRUM 625 X-TREME	MILLER SPECTRUM 625 X-TREME PLASMA CUTTER, METAL CART INCLUDED, WORKING CONDITION MILLER · SPECTRUM 625 X-TREME	🔒 Subscribe
	KEYSTONE MACHINERY	ROLLCASE	KEYSTONE MACHINERY ROLLCASE, HYDRAULIC DRIVE TYPE, ROLLER SIZE: 4.5 X 12 INCH, OVERALL DIMENSIONS: 20 X 15 INCH. OUTFEED FROM GANG SAW. KEYSTONE MACHINERY · ROLLCASE	🔒 Subscribe
			NEW SAW BITS AND PARTS, SIMONDS CARBIDE BITS, PIPERS CARBIDE BITS	🔒 Subscribe
			OUTFEED LOG TROUGH WITH KICKERS, HYDRAULIC DRIVE TYPE, SIZE: 33 X 20, OVERALL WIDTH: 56, PAN WIDTH: 14, LOG KICKERS: YES, 4 ARM KICKERS, CHAIN TYPE: LADDERBACK	🔒 Subscribe
	LINCOLN ELECTRIC	POWER MIG 210 MP	LINCOLN ELECTRIC POWER MIG 210 MP WELDER, TANK CART AND CABINET INCLUDED LINCOLN ELECTRIC · POWER MIG 210 MP	🔒 Subscribe
			BELT CONVEYOR, HYDRAULIC DRIVE TYPE. LENGTH: 21'. OVERALL HEIGHT: 38". OVERALL WIDTH: 20". BELT WIDTH: 12". SLANTED FROM 27" TO 38", MOUNTED ON SWIVEL WHEELS, ONE SIDE HAS 5" SLANTED SIDE, OTHER SIDE HAS 6" STRAIGHT SIDE	🔒 Subscribe
			4 STRAND GREEN CHAIN, ELECTRIC DRIVE TYPE, 4 STRANDS, OVERALL DIMENSIONS: 7'4"41'3". SHAFT NOT INCLUDED ON ONE END	🔒 Subscribe
			TRANSFER DECK, HYDRAULIC DRIVE TYPE, 5 STRANDS, 4X16X35HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE, WITH AIR STOP N GO	🔒 Subscribe
			5 STRAND LOG DECK, HYDRAULIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 5 STRANDS, STOP'N'LOAD, SIZE: 22 X 116	🔒 Subscribe
			HYDRAULIC PAK, WORLDWIDE 5HP ELECTRIC MOTOR, USED TO POWER CONVEYORS	🔒 Subscribe
	SALEM	RESAW CONTROL SYSTEM	SALEM SAWYERS CAB, 155 X 61 X 11 OVERALL DIMENSIONS, HEAT: YES, AC: YES, JOYSTICK CONTROLS, TWO CRACKED WINDOWS SALEM · RESAW CONTROL SYSTEM	🔒 Subscribe
	QUINCY	350	QUINCY AIR COMPRESSOR MODEL: 350 S/N: 394120 QUINCY · 350	🔒 Subscribe
	RECKART	42	RECKART 42 DUST BLOWER, 50 HP ELECTRIC MOTOR, 18 INCH INLET SIZE, 12 INCH OUTLET SIZE, SIZE: 42, INCLUDES PIPE: NO RECKART · 42	🔒 Subscribe
			TRANSFER DECK, HYDRAULIC DRIVE TYPE, 13 STRANDS, 147X77X67HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE. ONE SIDE HAS LIVE ROLLCASE WITH POP UP.	🔒 Subscribe
	PRESTO	XL36-20	PRESTO SCISSOR LIFT TABLES, SIZE 24 X 48, MODEL XL36-20, 2000 LBS CAPACITY, ELECTRIC/HYD POWERED PRESTO · XL36-20	🔒 Subscribe
			ROLL OF 30 BELT AND CATWALK, NEW, 7 X 5.5 X 35 HIGH CATWALK	🔒 Subscribe
			BELT CONVEYOR, DRIVE TYPE: HYDRAULIC. LENGTH: 19 FT. OVERALL HEIGHT: 88 IN. OVERALL WIDTH: 26 IN. BELT WIDTH: 20 IN.	🔒 Subscribe
			ROLLS AND GANG SAW PARTS - 7 NEW ROLLS, NEW TOP ARBOR, NEW ARBOR AND SHAFT, FEED CHAIN AND PADDLES FOR KEYSTONE GANG SAW, ASSORTED PARTS	🔒 Subscribe
	MORBARK		MORBARK VIBRATING CONVEYOR, ELECTRIC DRIVE TYPE, SIZE: 26 X 30, PAN WIDTH: 18 INCH MORBARK	🔒 Subscribe

Year	Make	Model	Description	Price
	NICHOLSON	A1-27	NICHOLSON A1-27 RING DEBARKER, 6 ARMS, HYDRAULIC ROLLER TENSIONER ARMS, HYDRAULIC FEED ROLLS, JOYSTICK CONTROLS, 30 LOG CAPACITY. HEAD DRIVEN BY ELECTRIC, POWER PACK INCLUDED. CONTROLS IN CAB (CAB NOT INCLUDED).	🔒 Subscribe
	SHARP	2 HEAD	SHARP 2 HEAD SHARP CHAIN SCRAGG MILL, ELECTRIC DRIVE, 48 INCH CIRCLE BLADE, 14 X 40 OVERALL MACHINE MEASUREMENT, SETWORKS, INCLUDES HYDRAULIC UNIT & CONTROLS, SAWYERS CAB WITH COMPUTERIZED CONTROL SYSTEM, LOG CAPACITY 24 X 11', CONVERTED FROM END DOGGING SCRAGG TO SHARP CHAIN TYPE, A GOOD WORKING MACHINE.	🔒 Subscribe
2010	BREWER	3HD D.E.	2010 BREWER 3 HEAD RESAW, 40 HP ELECTRIC ON HEADS, AUTOMATIC LUBE SYSTEM, INCLUDES HYD PAKS, GOOD CONDITION, BLADE SIZE: 4 INCH, BLADE TENSION: AIR, CUT CAPACITY: 16 X 16 INCH, OVERALL DIMENSIONS: 11 X 21 FT, WHEEL SIZE: 3.5 X 40 INCH, GUIDE TYPE: BLOCK S/N: 10 0610	🔒 Subscribe
	KEYSTONE MACHINERY		KEYSTONE MACHINERY GANG SAW, LINE-SHAFT DRIVE TYPE, BOTH POWER FEED ROLLS, CIRCLE BLADE TYPE, POWERED INFEED, 6 X 12 CAPACITY, SPRING HOLD DOWN SYSTEM, DUAL ARBOR WITH SIZER HEAD	🔒 Subscribe
1999	WEST PLAINS	WPRS-WBS	1999 WEST PLAINS WPRS-WBS RESAW, 4 HEADS, 12" WIDTH CAPACITY, 40 HP MOTORS, ELECTRIC DRIVE, MANUAL BLADE TENSION, BLOCK GUIDE TYPE, 3.75 X 42 WHEEL SIZE, 25 EXTRA RESHARPENED BANDS. BAND WHEELS HAVE BEEN REDRESSED, STEEL WEB FEED THRU. GOOD CONDITION. NOT CURRENTLY SETUP. READY TO BE LOADED. S/N: 146	🔒 Subscribe
	STROM	Oct-72	STROM 10-72 MERCHANDISING SAW, 6 SWING ARM SAW BLADE, 75 HP. ELECTRIC DRIVE, CONTROLS IN CAB S/N: 1028	🔒 Subscribe
1983	CORLEY	801294	1983 CORLEY 801294 EDGER, ELECTRIC DRIVE, 4 CIRCLE BLADES (4 STATIONARY), 6 X 48 CUT CAPACITY, LASERS, STATIONARY SET UP, SAW DUST BELT S/N: E-648-16	🔒 Subscribe
	KMC	TRANSFER DECK	KMC TRANSFER DECK, HYDRAULIC DRIVE TYPE, 3 STRANDS, NO STOP'N'LOAD, 92X31X36HIGH SIZE, LINK CHAIN TYPE	🔒 Subscribe
	JOHN DEERE	4045TF250A	JOHN DEERE 4045TF250A POWER UNIT, 4 CYLINDER, DIESEL, 125 HORSEPOWER, 12 VOLTAGE, CLUTCH, METER READS: 7109 S/N: 917578	🔒 Subscribe
	KMC	CANT SIZER	KMC CANT SIZER, HYDRAULIC DRIVE, VERTICAL AND HORIZONTAL 1-15/16 ARBORS, 10 INFEED, FOOT PEDAL OPERATED	🔒 Subscribe
	CARDINAL		CARDINAL LOG DECK, HYDRAULIC DRIVE TYPE, 4 DECK STRANDS, NO STOP'N'LOAD, 13X30X52HIGH SIZE, LINK CAN-AM CHAIN TYPE	🔒 Subscribe
	KEYSTONE MACHINERY		KEYSTONE MACHINERY GANG SAW BLADES AND COLLARS, SAW COLLARS FROM 3/8 TO 1 15/16 WITH 2 3/8 ARBOR, SAW BLADES 12 WITH 2 3/8 ARBOR, APPROX 100 10 AND 100 12 SAW BLADES	🔒 Subscribe
	KEYSTONE MACHINERY	DAUL HEAD	KEYSTONE MACHINERY DAUL HEAD NOTCHER, LINE-SHAFT DRIVE TYPE, DOUBLE HEADS, HYDRAULIC PUSHER ARMS INFEED, 82 LENGTH CAPACITY, INDEXABLE TEETH ON HEAD S/N:	🔒 Subscribe
			APPROX. 84 PCS. 2 X 2 X 6, MAY BE A FEW 1/2 BLOCKS.	🔒 Subscribe
	JOHN DEERE	6081AF001	JOHN DEERE 6081AF001 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, METER READS 1705.4, 12 VOLTAGE, CLUTCH: YES, EXHAUST PIPE, RUNS GOOD S/N: RG6081A110857	🔒 Subscribe
	KEYSTONE MACHINERY	MANUAL	KEYSTONE MACHINERY MANUAL CHOP SAW, LINESHAFT BLADE DRIVE, 24 INCH BLADE SIZE, MANUAL BLADE UP/DOWN, 4 X 12 CUT CAPACITY, 20 X 10 INFEED, 20 X 8 OUTFEED, MATERIAL STOPS ON OUTFEED, INCLUDES LINESHAFT AND GEARBOX	🔒 Subscribe
	MORBARK		INFEED LOG TROUGH, HYDRAULIC DRIVE TYPE, 38 X 20 SIZE, 42 OVERALL WIDTH, 14 PAN WIDTH, LADDERBACK CHAIN TYPE, SHOP BUILT, GOOD TROUGH, SUPPORTS TO GROUND	🔒 Subscribe
2000	DEUTZ	BF6L913C	2000 DEUTZ BF6L913C POWER UNIT, 177 HP DIESEL, ROCKFORD CLUTCH, RUNS AND OPERATES	🔒 Subscribe
	KMC	CANT SIZER	KMC CANT SIZER, VERTICAL AND HORIZONTAL SHAFTS, HYDRAULIC DRIVE, DIMENSIONS 45 X 67 X 61 HIGH	🔒 Subscribe
			TRANSFER DECK, 8X20 OVERALL DIMENSIONS, 4 STRANDS, LINK CHAIN TYPE, 8 EXTENSION POP-UP ON THE END	🔒 Subscribe
	WINSTON MACHINERY	LOG DECK	WINSTON MACHINERY LOG DECK, ELECTRIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 4 STRANDS, STOP'N'LOAD, SIZE: 17 X 216 X 92. HEAVY DUTY DECK, SUPPORT TO GROUND.	🔒 Subscribe
	TIPTON IRONWORKS	SCRAGG MILL	TIPTON IRONWORKS SCRAGG MILL, SHARP CHAIN SCRAGG, TWO HEAD, CIRCLE BLADE, 11 X 196, OVERALL DIMENSIONS 196 X 7 X 80 HIGH, BLADES NOT INCLUDED S/N: TIW MS 1004	🔒 Subscribe
	LINCOLN	RANGER 10,000	LINCOLN RANGER 10,000 WELDER, METER READS 2,855 HOURS, KOHLER GAS ENGINE, APPROXIMATELY 50' OF LEAD INCLUDED, NEEDS NEW BATTERY, RUNS AND OPERATES	🔒 Subscribe
	MORBARK		MORBARK VIBRATING CONVEYOR, 30 INCH PAN WIDTH, 5 INCH SLANTED SIDES, 10 HP ELECTRIC MOTOR S/N:	🔒 Subscribe
	BIGASS FAN		BIGASS FAN S/N: MUES-23250-003-01	🔒 Subscribe
	DEUTZ	F6L 912	DEUTZ F6L 912 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, 1121 METER READS, 94 HORSEPOWER, NO CLUTCH S/N: 5042758	🔒 Subscribe
	SHOP BUILT	NA	EDGER, ELECTRIC DRIVE, 1 BLADE (1 STATIONARY), CIRCLE BLADE TYPE, 8X22 CUT CAPACITY, 30X7 INFEED MEASUREMENT, 2-15/16 ARBOR SIZE, LASERS, STATIONARY SET UP, SLAB DROP OFF POCKET, 24 BLADE, NEW BUT NEVER USED, CONTROL BOX	🔒 Subscribe
			16 NEW HYDRAULIC CYLINDERS, 2 USED HYDRAULIC CYLINDERS	🔒 Subscribe
	MORBARK		OUTFEED LOG TROUGH WITH KICKERS, MAKE: MORBARK. DRIVE TYPE: HYDRAULIC. SIZE: 52 X 20. OVERALL WIDTH: 7. PAN WIDTH: 14. LOG KICKERS: YES. CHAIN TYPE: LADDERBACK. 3 KICKER ARMS, KICKER JOINTS SHOW SOME WEAR, SUPPORT TO GROUND	🔒 Subscribe
	UNKNOWN		ROLLCASE WITH POP-UP TRANSFER, HYDRAULIC DRIVE TYPE, 12 INCH ROLL SPACING, 6X24 INCH ROLLER SIZE, 54X11'5 INCH OVERALL DIMENSIONS. POP UP TRANSFER IS POWERED BY A GENERAL PURPOSE 3/4 HP 3 PHASE ELECTRIC MOTOR.	🔒 Subscribe
	KMC	LIVE ROLLCASE	KMC LIVE ROLLCASE, HYDRAULIC DRIVE TYPE, 15 ROLL SPACING, 6X12 ROLLER SIZE, 22X15X36HIGH OVERALL DIMENSIONS, 1-1/4 SHAFT SIZE, DOTTED ROLLERS	🔒 Subscribe
	MILLER	SPECTRUM 625 X-TREME	MILLER SPECTRUM 625 X-TREME PLASMA CUTTER, METAL CART INCLUDED, WORKING CONDITION	🔒 Subscribe
	KEYSTONE MACHINERY	ROLLCASE	KEYSTONE MACHINERY ROLLCASE, HYDRAULIC DRIVE TYPE, ROLLER SIZE: 4.5 X 12 INCH, OVERALL DIMENSIONS: 20 X 15 INCH. OUTFEED FROM GANG SAW.	🔒 Subscribe
			NEW SAW BITS AND PARTS, SIMONDS CARBIDE BITS, PIPERS CARBIDE BITS	🔒 Subscribe
			OUTFEED LOG TROUGH WITH KICKERS, HYDRAULIC DRIVE TYPE, SIZE: 33 X 20, OVERALL WIDTH: 56, PAN WIDTH: 14, LOG KICKERS: YES, 4 ARM KICKERS, CHAIN TYPE: LADDERBACK	🔒 Subscribe
	LINCOLN ELECTRIC	POWER MIG 210 MP	LINCOLN ELECTRIC POWER MIG 210 MP WELDER, TANK CART AND CABINET INCLUDED	🔒 Subscribe
			BELT CONVEYOR, HYDRAULIC DRIVE TYPE. LENGTH: 21'. OVERALL HEIGHT: 38". OVERALL WIDTH: 20". BELT WIDTH: 12". SLANTED FROM 27" TO 38", MOUNTED ON SWIVEL WHEELS, ONE SIDE HAS 5" SLANTED SIDE, OTHER SIDE HAS 6" STRAIGHT SIDE	🔒 Subscribe
			4 STRAND GREEN CHAIN, ELECTRIC DRIVE TYPE, 4 STRANDS, OVERALL DIMENSIONS: 7'4"41'3". SHAFT NOT INCLUDED ON ONE END	🔒 Subscribe
			TRANSFER DECK, HYDRAULIC DRIVE TYPE, 5 STRANDS, 4X16X35HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE, WITH AIR STOP N GO	🔒 Subscribe
			5 STRAND LOG DECK, HYDRAULIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 5 STRANDS, STOP'N'LOAD, SIZE: 22 X 116	🔒 Subscribe
			HYDRAULIC PAK, WORLDWIDE 5HP ELECTRIC MOTOR, USED TO POWER CONVEYORS	🔒 Subscribe
	SALEM	RESAW CONTROL SYSTEM	SALEM SAWYERS CAB, 155 X 61 X 11 OVERALL DIMENSIONS, HEAT: YES, AC: YES, JOYSTICK CONTROLS, TWO CRACKED WINDOWS	🔒 Subscribe
	QUINCY	350	QUINCY AIR COMPRESSOR MODEL: 350 S/N: 394120	🔒 Subscribe
	RECKART	42	RECKART 42 DUST BLOWER, 50 HP ELECTRIC MOTOR, 18 INCH INLET SIZE, 12 INCH OUTLET SIZE, SIZE: 42, INCLUDES PIPE: NO	🔒 Subscribe
			TRANSFER DECK, HYDRAULIC DRIVE TYPE, 13 STRANDS, 147X77X67HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE. ONE SIDE HAS LIVE ROLLCASE WITH POP UP.	🔒 Subscribe
	PRESTO	XL36-20	PRESTO SCISSOR LIFT TABLES, SIZE 24 X 48, MODEL XL36-20, 2000 LBS CAPACITY, ELECTRIC/HYD POWERED	🔒 Subscribe
			ROLL OF 30 BELT AND CATWALK, NEW, 7 X 5.5 X 35 HIGH CATWALK	🔒 Subscribe
			BELT CONVEYOR, DRIVE TYPE: HYDRAULIC. LENGTH: 19 FT. OVERALL HEIGHT: 88 IN. OVERALL WIDTH: 26 IN. BELT WIDTH: 20 IN.	🔒 Subscribe
			ROLLS AND GANG SAW PARTS - 7 NEW ROLLS, NEW TOP ARBOR, NEW ARBOR AND SHAFT, FEED CHAIN AND PADDLES FOR KEYSTONE GANG SAW, ASSORTED PARTS	🔒 Subscribe
	MORBARK		MORBARK VIBRATING CONVEYOR, ELECTRIC DRIVE TYPE, SIZE: 26 X 30, PAN WIDTH: 18 INCH	🔒 Subscribe

NICHOLSON A1-27

MISC

NICHOLSON A1-27 RING DEBARKER, 6 ARMS, HYDRAULIC ROLLER TENSIONER ARMS, HYDRAULIC FEED ROLLS, JOYSTI...

Hammer Price: 🔒

SHARP 2 HEAD

PAPER & PULP EQUIPMENT

SHARP 2 HEAD SHARP CHAIN SCRAGG MILL, ELECTRIC DRIVE, 48 INCH CIRCLE BLADE, 14 X 40 OVERALL MACHINE ...

Hammer Price: 🔒

2010 BREWER 3HD D.E.

MISC

2010 BREWER 3 HEAD RESAW, 40 HP ELECTRIC ON HEADS, AUTOMATIC LUBE SYSTEM, INCLUDES HYD PAKS, GOOD CO...

Hammer Price: 🔒

KEYSTONE MACHINERY

METALWORKING & FABRICATION EQUIPMENT

KEYSTONE MACHINERY GANG SAW, LINE-SHAFT DRIVE TYPE, BOTH POWER FEED ROLLS, CIRCLE BLADE TYPE, POWERE...

Hammer Price: 🔒

1999 WEST PLAINS WPRS-WBS

MISC

1999 WEST PLAINS WPRS-WBS RESAW, 4 HEADS, 12" WIDTH CAPACITY, 40 HP MOTORS, ELECTRIC DRIVE, MANUAL B...

Hammer Price: 🔒

STROM Oct-72

METALWORKING & FABRICATION EQUIPMENT

STROM 10-72 MERCHANDISING SAW, 6 SWING ARM SAW BLADE, 75 HP. ELECTRIC DRIVE, CONTROLS IN CAB S/N: 10...

Hammer Price: 🔒

1983 CORLEY 801294

MISC

1983 CORLEY 801294 EDGER, ELECTRIC DRIVE, 4 CIRCLE BLADES (4 STATIONARY), 6 X 48 CUT CAPACITY, LASER...

Hammer Price: 🔒

KMC TRANSFER DECK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KMC TRANSFER DECK, HYDRAULIC DRIVE TYPE, 3 STRANDS, NO STOP'N'LOAD, 92X31X36HIGH SIZE, LINK CHAIN TY...

Hammer Price: 🔒

JOHN DEERE 4045TF250A

MISC

JOHN DEERE 4045TF250A POWER UNIT, 4 CYLINDER, DIESEL, 125 HORSEPOWER, 12 VOLTAGE, CLUTCH, METER READ...

Hammer Price: 🔒

KMC CANT SIZER

MISC

KMC CANT SIZER, HYDRAULIC DRIVE, VERTICAL AND HORIZONTAL 1-15/16 ARBORS, 10 INFEED, FOOT PEDAL OPERA...

Hammer Price: 🔒

CARDINAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CARDINAL LOG DECK, HYDRAULIC DRIVE TYPE, 4 DECK STRANDS, NO STOP'N'LOAD, 13X30X52HIGH SIZE, LINK CAN...

Hammer Price: 🔒

KEYSTONE MACHINERY

WOODWORKING EQUIPMENT

KEYSTONE MACHINERY GANG SAW BLADES AND COLLARS, SAW COLLARS FROM 3/8 TO 1 15/16 WITH 2 3/8 ARBOR, SA...

Hammer Price: 🔒

KEYSTONE MACHINERY DAUL HEAD

PACKAGING EQUIPMENT

KEYSTONE MACHINERY DAUL HEAD NOTCHER, LINE-SHAFT DRIVE TYPE, DOUBLE HEADS, HYDRAULIC PUSHER ARMS INF...

Hammer Price: 🔒

MISC

APPROX. 84 PCS. 2 X 2 X 6, MAY BE A FEW 1/2 BLOCKS....

Hammer Price: 🔒

JOHN DEERE 6081AF001

MISC

JOHN DEERE 6081AF001 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, METER READS 1705.4, 12 VOLTAGE, C...

Hammer Price: 🔒

KEYSTONE MACHINERY MANUAL

METALWORKING & FABRICATION EQUIPMENT

KEYSTONE MACHINERY MANUAL CHOP SAW, LINESHAFT BLADE DRIVE, 24 INCH BLADE SIZE, MANUAL BLADE UP/DOWN,...

Hammer Price: 🔒

MORBARK

MISC

INFEED LOG TROUGH, HYDRAULIC DRIVE TYPE, 38 X 20 SIZE, 42 OVERALL WIDTH, 14 PAN WIDTH, LADDERBACK CH...

Hammer Price: 🔒

2000 DEUTZ BF6L913C

MISC

2000 DEUTZ BF6L913C POWER UNIT, 177 HP DIESEL, ROCKFORD CLUTCH, RUNS AND OPERATES...

Hammer Price: 🔒

KMC CANT SIZER

MISC

KMC CANT SIZER, VERTICAL AND HORIZONTAL SHAFTS, HYDRAULIC DRIVE, DIMENSIONS 45 X 67 X 61 HIGH...

Hammer Price: 🔒

MISC

TRANSFER DECK, 8X20 OVERALL DIMENSIONS, 4 STRANDS, LINK CHAIN TYPE, 8 EXTENSION POP-UP ON THE END...

Hammer Price: 🔒

WINSTON MACHINERY LOG DECK

MISC

WINSTON MACHINERY LOG DECK, ELECTRIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 4 STRANDS, STOP'N'LOA...

Hammer Price: 🔒

TIPTON IRONWORKS SCRAGG MILL

PAPER & PULP EQUIPMENT

TIPTON IRONWORKS SCRAGG MILL, SHARP CHAIN SCRAGG, TWO HEAD, CIRCLE BLADE, 11 X 196, OVERALL DIMENSIO...

Hammer Price: 🔒

LINCOLN RANGER 10,000

WELDING & CUTTING

LINCOLN RANGER 10,000 WELDER, METER READS 2,855 HOURS, KOHLER GAS ENGINE, APPROXIMATELY 50' OF LEAD ...

Hammer Price: 🔒

MORBARK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MORBARK VIBRATING CONVEYOR, 30 INCH PAN WIDTH, 5 INCH SLANTED SIDES, 10 HP ELECTRIC MOTOR S/N:...

Hammer Price: 🔒

BIGASS FAN

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BIGASS FAN S/N: MUES-23250-003-01...

Hammer Price: 🔒

DEUTZ F6L 912

MISC

DEUTZ F6L 912 POWER UNIT, 6.0 ENGINE CYLINDER, DIESEL FUEL, 1121 METER READS, 94 HORSEPOWER, NO CLUT...

Hammer Price: 🔒

SHOP BUILT NA

MISC

EDGER, ELECTRIC DRIVE, 1 BLADE (1 STATIONARY), CIRCLE BLADE TYPE, 8X22 CUT CAPACITY, 30X7 INFEED MEA...

Hammer Price: 🔒

MISC

16 NEW HYDRAULIC CYLINDERS, 2 USED HYDRAULIC CYLINDERS...

Hammer Price: 🔒

MORBARK

MISC

OUTFEED LOG TROUGH WITH KICKERS, MAKE: MORBARK. DRIVE TYPE: HYDRAULIC. SIZE: 52 X 20. OVERALL WIDTH:...

Hammer Price: 🔒

UNKNOWN

MISC

ROLLCASE WITH POP-UP TRANSFER, HYDRAULIC DRIVE TYPE, 12 INCH ROLL SPACING, 6X24 INCH ROLLER SIZE, 54...

Hammer Price: 🔒

KMC LIVE ROLLCASE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KMC LIVE ROLLCASE, HYDRAULIC DRIVE TYPE, 15 ROLL SPACING, 6X12 ROLLER SIZE, 22X15X36HIGH OVERALL DIM...

Hammer Price: 🔒

MILLER SPECTRUM 625 X-TREME

WELDING & CUTTING

MILLER SPECTRUM 625 X-TREME PLASMA CUTTER, METAL CART INCLUDED, WORKING CONDITION...

Hammer Price: 🔒

KEYSTONE MACHINERY ROLLCASE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

KEYSTONE MACHINERY ROLLCASE, HYDRAULIC DRIVE TYPE, ROLLER SIZE: 4.5 X 12 INCH, OVERALL DIMENSIONS: 2...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

NEW SAW BITS AND PARTS, SIMONDS CARBIDE BITS, PIPERS CARBIDE BITS...

Hammer Price: 🔒

MISC

OUTFEED LOG TROUGH WITH KICKERS, HYDRAULIC DRIVE TYPE, SIZE: 33 X 20, OVERALL WIDTH: 56, PAN WIDTH: ...

Hammer Price: 🔒

LINCOLN ELECTRIC POWER MIG 210 MP

WELDING & CUTTING

LINCOLN ELECTRIC POWER MIG 210 MP WELDER, TANK CART AND CABINET INCLUDED...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BELT CONVEYOR, HYDRAULIC DRIVE TYPE. LENGTH: 21'. OVERALL HEIGHT: 38". OVERALL WIDTH: 20". BELT WIDT...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

4 STRAND GREEN CHAIN, ELECTRIC DRIVE TYPE, 4 STRANDS, OVERALL DIMENSIONS: 7'4"41'3". SHAFT NOT INCLU...

Hammer Price: 🔒

MISC

TRANSFER DECK, HYDRAULIC DRIVE TYPE, 5 STRANDS, 4X16X35HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE, WIT...

Hammer Price: 🔒

MISC

5 STRAND LOG DECK, HYDRAULIC DRIVE TYPE, HYDRAULIC UP & DOWN CYLINDER, 5 STRANDS, STOP'N'LOAD, SIZE:...

Hammer Price: 🔒

MISC

HYDRAULIC PAK, WORLDWIDE 5HP ELECTRIC MOTOR, USED TO POWER CONVEYORS...

Hammer Price: 🔒

SALEM RESAW CONTROL SYSTEM

MISC

SALEM SAWYERS CAB, 155 X 61 X 11 OVERALL DIMENSIONS, HEAT: YES, AC: YES, JOYSTICK CONTROLS, TWO CRAC...

Hammer Price: 🔒

QUINCY 350

AIR COMPRESSORS

QUINCY AIR COMPRESSOR MODEL: 350 S/N: 394120...

Hammer Price: 🔒

RECKART 42

DUST COLLECTION EQUIPMENT

RECKART 42 DUST BLOWER, 50 HP ELECTRIC MOTOR, 18 INCH INLET SIZE, 12 INCH OUTLET SIZE, SIZE: 42, INC...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TRANSFER DECK, HYDRAULIC DRIVE TYPE, 13 STRANDS, 147X77X67HIGH OVERALL DIMENSIONS, LINK CHAIN TYPE. ...

Hammer Price: 🔒

PRESTO XL36-20

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

PRESTO SCISSOR LIFT TABLES, SIZE 24 X 48, MODEL XL36-20, 2000 LBS CAPACITY, ELECTRIC/HYD POWERED...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ROLL OF 30 BELT AND CATWALK, NEW, 7 X 5.5 X 35 HIGH CATWALK...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BELT CONVEYOR, DRIVE TYPE: HYDRAULIC. LENGTH: 19 FT. OVERALL HEIGHT: 88 IN. OVERALL WIDTH: 26 IN. BE...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

ROLLS AND GANG SAW PARTS - 7 NEW ROLLS, NEW TOP ARBOR, NEW ARBOR AND SHAFT, FEED CHAIN AND PADDLES F...

Hammer Price: 🔒

MORBARK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MORBARK VIBRATING CONVEYOR, ELECTRIC DRIVE TYPE, SIZE: 26 X 30, PAN WIDTH: 18 INCH...

Hammer Price: 🔒

1 2 3 4 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Jacob A Weaver Co 1205 Guys Mills PA

Save to Project Folder

Print Options

Save to Project Folder