Moving No Reserve CNC Conventional Equipment Pallet Size Lots Servo Boards Motors Fanuc Okuma Yaskawa Yasnac Repair Parts Rigging

Reliable Equipment LLC

Category: CNC MACHINE CENTERS

Total Lots: 90

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 90 lots

Year	Make	Model	Lot Description	Hammer Price
1997	OKUMA	GP47F	1997 OKUMA GP47F 16" X 60" CNC OD GRINDER WITH IN PROCESS GAGING SYSTEM S/N: 0811.053SPECIFICATIONS:SWING OVER TABLE: 16.93 INCHESMAXIMUM GRINDING DIAMETER: 15.75 INCHESMAXIMUM DISTANCE BETWEEN CENTERS: 59.06 INCHESMAXIMUM GRINDING WHEEL WIDTH: 6.03 INCHESMAXIMUM WORKPIECE WEIGHT BETWEEN CENTERS: 660 POUNDSGRINDING WHEEL SIZE (OD X W X ID): 30" X 6.30" X 12"WHEELHEAD (X-AXIS) .TRAVEL: 14.57 INCHESTRAVEL PER PULSE HANDLE REVOLUTION: 0.004", 0.039", 0.197"TRAVEL PER PULSE HANDLE GRADUATION: 0.00004", 0.0004", 0.0020"AUTO INFEED SPEED: 0.000047 - 236.22 IPMPOSITIONING SPEED: 708.66 IPMTABLE (Z-AXIS) TRAVEL: 72.83 INCHESTRAVEL PER PULSE HANDLE REVOLUTION: 0.004", 0.039", 0.197"TRAVEL PER PULSE HANDLE GRADUATION: 0.00004", 0.0004", 0.0020"AUTO INFEED SPEED: 0.000024 - 236.22 IPMPOSITIONING SPEED: 629.92 IPMWORKHEAD (C-AXIS) .CENTER HOLE: NO. 5 MTWORK SPINDLE SPEED (INFINITELY VARIABLE): 600 RPMFOOTSTOCKCENTER TAPER: NO. 5 MTAUTO SROKE (HYDRAULIC): 2.76 INCHESMOTORS WHEEL SPINDLE: 20 HPWORKHEAD (C-AXIS): 4.80 HPHYDRAULIC PUMP : 10 HPWHEELHEAD (X-AXIS): 1.6 HPTABLE DRIVE (Z-AXIS): 2.7 HPAPPROXIMATE WEIGHT: 21,000 LBS.EQUIPPED WITH:CONTROL OSP 5020GSAGEM MOVOMATIC IN PROCESS GAGING SYSTEMMODEL: CH-2034 PESEUXTYPE: 15342.00303 CYCLOTRON PAPERBAND COOLANTFILTRATION UNITMODEL: CTPX-30-120 MD20CH-H STOCK 12354 1997 · OKUMA · GP47F	🔒 Subscribe
2007	MAZAK	MULTIPLEX 4300 MAZATROL FUSION 640T	2007 MAZAK MULTIPLEX 4300 MAZATROL FUSION 640TSPECIFICATIONS:CHUCK SIZE: (2) 10 CHUCKMAXIMUM SWING / CUTTING DIAMETER: 22.04 / 16.93MAX. CUT LENGTH CHUCK/SHAFT WORK: 8.86 / 22.04DISTANCE BETWEEN SPINDLE FACES: 9.842 57.09 X-AXIS TRAVEL: 12.2Z-AXIS TRAVEL: 23.8NO. TURRETS / POSITIONS: 2 POS. / 12 POS./EA. SPINDLE MOTOR 30 MIN./CONTIN.: 30 HP / 25 HPSPINDLE TORQUE: 362 FT. /LBS.SPINDLE NOSE / BORE / BAR CAPACITY: A2-8/3.46/3.03SPINDLE SPEED: 4000 RPMRAPID TRAVERSE: 945 IPMELECTRICAL REQUIREMENTS (MACH. ONLY) 106 KVAMACHINE DIMENSIONS (MACH. ONLY): 175X82.2X77MACHINE WEIGHT (ESTIM.): 24,000 LBS. EQUIPPED WITH:REAR EXIT CHIP CONVEYORAUTO CHK JAWS OPEN/CLOSESYNCHRONIZED Z AXISSIMPLE THRU SPINDLE AIR BLAST(2) 10 CHUCKSAUTOMATIC TOOL EYESTOOL LIFE MONITORINGABSOLUTE POSITIONING SYSTEM FRONT DOOR INTERLOCKSHYDRAULIC PRESSURE INTERLOCKSALL AVAILABLE TOOLING 2007 · MAZAK · MULTIPLEX 4300 MAZATROL FUSION 640T	🔒 Subscribe
	AMADA	COMA 567	AMADA COMA 567 CNC 50 TON TURRET PUNCH PRESS SN: C67648MODEL: 506072GENERAL SPECIFICATIONS: MAXIMUM TRAVERSE: 60 X 72MAXIMUM SHEET SIZE (WITH REPOSITIONING): 60 X 144MAXIMUM PUNCHING CAPACITY (MILD STEEL): 3/8MAXIMUM HITS PER MINUTE: 300MAXIMUM POSITIONING SPEED: 2000 INCHES PER MINUTETOTAL TOOL STATIONS IN TURRET: 72TURRET CONFIGURATION- THICK TURRETTURRET SPEED: 30 RPMAIR REQUIREMENT: 80 PSIMAIN MOTOR HORSEPOWER: 5.5 KWEQUIPPED WITHGE FANUC 6M CONTROLAUTO REPOSITIONINGHYDRAULIC CLUTCHBALL TRANSFER TABLECHIP CONVEYOR APPROXIMATE WEIGHT: 34,000 LBS.STOCK 12328 AMADA · COMA 567	🔒 Subscribe
	FACTORY CAT	40-C XR SERIES	FACTORY CAT 40-C XR SERIES FLOOR SCRUBBER EXCELLENT CONDITION S/N: 76174 FACTORY CAT · 40-C XR SERIES	🔒 Subscribe
	FANUC	S420IF	FANUC S420IF 6 AXIS ROBOT 140 KG PAYLOAD RJ2 CONTROLLER WITH TECH PENDENTMODEL # S-420 IF6 AXIS140.0 KG PAYLOADRJ2 CONTROLLER WITH TEACH PENDANTH REACH 2850 MMREPEATABILITY .4000MMROBOT MASS 1600 KGSTRUCTURE ARTICULATED ROBOT SPEEDS:J1 90O/S ( 1.57 RAD/S)J2 100O/S ( 1.75 RAD/S)J3 90O/S ( 1.57 RADS/S)J4 210O/S (3.67 RAD/S)J5 150O/S (2.62 RAD/S)J6 210O/S (3.67 RAD/S) ROBOT RANGE:J1 180OJ2 + 72O 70OJ3 + 30O 105OJ4 300OJ5 130OJ6 360OS/N: 12528 FANUC · S420IF	🔒 Subscribe
	MAZAK	QT	MAZAK QT CNC LATHE BALL SCREWS MAZAK · QT	🔒 Subscribe
	TIMESAVER	137-1HP/75	TIMESAVER 137-1HP/75 DRY SINGLE BELT SANDER 37" S/N: 22330MSPECIFICATIONS:MAX. SANDING WIDTH: 37 CONTACT WHEEL: 6 DIA. MIN. SANDING LENGTH: 8 ADJUSTMENT: 0 8 SANDING BELT SIZE: 37 X 75 NUMBER OF HEADS: 1 CONTACT WHEEL DIAMETER: 6 CONVEYOR SPEED: 15-45 FPM MAIN MOTOR: 20 HP APPROXIMATE DIMENSIONS: 6'4" W X 5'8"D X 7'4" H APPROXIMATE WEIGHT: 3,200 LBS. TIMESAVER · 137-1HP/75	🔒 Subscribe
	AEM TIMESAVER	401-37 AAL	AEM TIMESAVER 401-37 AAL PROWET NET TYPE BELT SANDER - AEM TIMESAVER 401-37 AAL PROWET WET TYPE BELT SANDERBELT SPEED 3000 SFPMBELT SIZE 37" X 60"FEED SPEED 10-50 FPMCONTACT ROLLER DIAMETER 6"MINIMUM PART LENGTH 8"MILD STEEL, SS, ALUMINUMVOLTAGE 440/3/60MAIN MOTOR 20HPDRYERWEIGHT 4500LBS72" X 60" X 75"H S/N: 12265 AEM TIMESAVER · 401-37 AAL	🔒 Subscribe
1988	OKAMOTO	820A	1988 OKAMOTO 820A AUTOMATIC SURFACE GRINDER WITH DROTABLE SIZE: 8" X 20"LONGITUDINAL TABLE TRAVEL: 25.59"MAX. TABLE LOAD: 440 LBS.CROSS SADDLE TRAVEL: 9"MAX. DISTANCE UNDER WHEEL: 15.6"TABLE SPEED: 1- 83 FPMCROSS SADDLE FEEDS (INTERMITTENT): 0.02"- 0.8"CONTINUOUS CROSS SADDLE FEED: 4- 40 IPMAUTOMATIC SPINDLE DOWNFEED RATE (INCREMENTAL): 0.0002"- 0.0015"RAPID VERTICAL SPINDLE RATE: 19 IPMGRINDING WHEEL SIZE: 8" X 1" X 1 1/4"GRINDING MOTOR POWER: 2 HPAPPROX. MACHINE DIMENSIONS (L X W X H): 90" X 70" X 75"APPROX. MACHINE WEIGHT: 3,600 LBS. EQUIPPED WITHOS WALKER CHUCK CONTROL (SEE PIC)8" X 20" ELECTRO MAGNETIC CHUCKVARIABLE CHUCK CONTROLAUTO LUBE SYSTEMCOOLANT SYSTEMSPLASH GUARD BACKINGMAGNASCALE 2 AXIS DROOVERHEAD WHEEL DRESSERLIGHT STOCK S/N: 1250 1988 · OKAMOTO · 820A	🔒 Subscribe
	OKAMOTO	PSG-125	OKAMOTO PSG-125 20" X 48" AUTOMATIC HYDRAULIC SURFACE GRINDER EQUIPPED WITH: 20" X 48" ELECTRO-MAGNETIC CHUCK DRO CAPABLE GRINDING LENGTH: 48 CAPABLE GRINDING WIDTH: 20" DISTANCE UNDER 20" WHEEL TO TABLE TOP: 23.4" LONGITUDINAL TRAVEL OF TABLE: 51.22" CROSS TRAVEL OF COLUMN: 20.86" TABLE T-SLOT (NO. X WIDTH): 3 X 0.669" LONGITUDINAL FEEDS, FPM: 1-100 FPM HAND FEED PER REVOLUTION: .984" CROSS FEEDS, INTERMITTENT: .20-1.37" CROSS FEEDS, CONTINUOUS FPM: 1-16.4 FPM HAND FEED PER REVOLUTION: .2" GRADUATION OF HANDWHEEL: .001" VERTICAL HEAD FEEDS AUTOMATIC FEED PER TABLE STROKE: .0002"-.002" AUTO FEED PER COLUMN REVERSAL: .0002"-.002" GRADUATION OF HANDWHEEL: .0002" HAND FEED PER REVOLUTION: .04" VERTICAL RAPID FEED: 12" GRINDING WHEEL DIAMETER: 20" WIDTH: 2" BORE: 5" SPINDLE REVOLUTION: 1,100 RPM SPINDLE MOTOR: 10 HP HYDRAULIC PUMP MOTOR: 5 HP VERTICAL RAPID FEED MOTOR: 1/2 HP APPROX. FLOOR SPACE: 150" X 109" APPROX. WEIGHT: 13,200 LBS. ELECTRICS: 3 PHASE, 220-440 VOLT 20" X 48" ELECTRO MAGNETIC GRINDING CHUCK WALKER ELECTRO MAGNETIC CHUCK CONTROL COOLANT SYSTEM OKAMOTO · PSG-125	🔒 Subscribe
2000	OKUMA	MA-650VB OSP U100M	2000 OKUMA MA-650VB OSP U100M 4 AXIS TABLE SIZE: 60.24 X 26 LOAD CAPACITY: 3,300 LBS. DISTANCE FROM FLOOR TO TABLE: 7.87 29.92 X-AXIS TRAVEL: 60.24 Y-AXIS TRAVEL: 26 Z-AXIS TRAVEL: 24 SPINDLE TAPER: CAT 50 SPINDLE SPEEDS (2 GEARED RANGES): 50-6,000 RPM SPINDLE MOTOR: 30 HP TOOL MAGAZINE CAPACITY: 48 POS. ATC MAX. TOOL DIAM./LENGTH: 9.31/15.75 TOOL CHANGE TIME: 2.4 SECONDS RAPID TRAVERSE RATES (X,Y,Z): 1,575 IPM / 1,181 IPM CUTTING FEEDRATES: 1181 IPM APPROX. MACHINE DIMENSIONS: 147.6 X 118 APPROX. MACHINE WEIGHT: 33,000 LBS. EQUIPPED WITH: COOLANT THRU SPINDLE RS 232 PORT INTERFACE RIGID TAPPING CHIP CONVEYOR AUGER STYLE CHIP CONVEYOR TSUDAKOMA 12 ROTARY TABLE WITH TRUNNION & TPC CONTROL 48 POSITION TOOL CHANGER HI-CUT HI G MAC MAN PULSE HANDLE COOLANT TANK & PUMP ALL AVAILABLE MANUALS 2000 · OKUMA · MA-650VB OSP U100M	🔒 Subscribe
	AIRFLOAT	AF06017-3	AIRFLOAT AF06017-3 LIFT GUIDE AIR SKID 19 X 18 X 6 PLUS 3 STROKE = 9 H TOTAL 4,500 LBS. PER SKID CONTROL DEADMAN PENDENT HOSES STOCK 12002 AIRFLOAT · AF06017-3	🔒 Subscribe
	TCM	FCG2.5TTT	TCM FCG2.5TTT FORKLIFT THREE STAGE MASTS WITH SIDE SHIFTER 189" X 4500 LBS. TCM · FCG2.5TTT	🔒 Subscribe
	LITHONIA LIGHTING	M47	LITHONIA LIGHTING M47 FLOODLIGHT METAL HALIDE WITH BULB 1000 WATTS LITHONIA LIGHTING · M47	🔒 Subscribe
	MITUTOYO	78" X 50" X 12"	MITUTOYO 78" X 50" X 12" THICK CMM QUALITY GRANITE SURFACE PLATE MITUTOYO · 78" X 50" X 12"	🔒 Subscribe
	MITUTOYO		MITUTOYO CMM GRANITE SURFACE PLATE 76" X 52" X 10" THICK MITUTOYO	🔒 Subscribe
			3 PLASTIC LIQUID STORAGE TANKS 250 GALLON CAPACITY	🔒 Subscribe
			DIE SETS FOR PUNCH PRESS 17 SETS	🔒 Subscribe
	OKUMA		CNC LATHE, MILL Y,X,Z AXIS, SPINDLE SERVO MOTORS, FANUC, OKUMA, YASNAC, YASKAWA, 8 PALLETS, 84 MOTORS OKUMA	🔒 Subscribe
	MAZAK OKUMA		CNC LATHE, MILLS PARTS MAZAK OKUMA	🔒 Subscribe
2009	GREENLEE	DIAMOND 1	2009 GREENLEE DIAMOND 1 X .040 178" L X 35/41 GRIT NO 406-442 NEW 37 PCS 2009 · GREENLEE · DIAMOND 1	🔒 Subscribe
			2 FORKLIFT BATTERY CHARGERS 24V & 36V	🔒 Subscribe
	AMADA	COMA 657	AMADA COMA 657 TURRET PUNCH PARTS & TOOLING AMADA · COMA 657	🔒 Subscribe
			CARDBOARD BOXES 3 PALLETS	🔒 Subscribe
			14 TON CAPACITY WALL MOUNTED JIB CRANE	🔒 Subscribe
		CU-24	AIR CHILLER CU-24 INDUSTRIAL MISTING FAN EVAPORATIVE COOLER - AIR CHILLER CU-24 INDUSTRIAL MISTING FAN EVAPORATIVE COOLER COVERED AREA 3000-3500 SF CFM AIRFLOW 12,000 CFM AIRFLOW SPEED @ 5 FT 21 MPH FAN SIZE 24" RUN TIME W/FULL TANK 32 GAL TANK - 4-5 HOURS AMP DRAW(110 VOLTS) 6.59 AMPS CIRCUIT BREAKER SIZE 15 AMPS POWER SUPPLY 1PH/110 VAC/60 HZ SIZE(H X W X D) 66 X 30 X 49 INCHES DISCHARGE TEMP DELTA 15-30 DEGREES (F) WEIGHT (EMPTY) 125 LBS NOISE LEVEL @ 10FT 68DB STOCK 12316" CU-24	🔒 Subscribe
			GRINDING WHEELS	🔒 Subscribe
	MAZAK & OKUMA		CNC LATHE MILL CNC AUTO LUBE PUMPS MAZAK & OKUMA MAZAK & OKUMA	🔒 Subscribe
			CNC LATHE HYDRAULIC CHUCKS	🔒 Subscribe
	HITACHI SEIKI		HITACHI SEIKI LATHE CNC TAIL STOCKS GRISETTI GRINDER & CINCINNATI STOCK 75" HITACHI SEIKI	🔒 Subscribe
			LATHE TOOL HOLDERS	🔒 Subscribe
	MAKINO	A55 HMC	MAKINO A55 HMC SPARE PARTS MAKINO · A55 HMC	🔒 Subscribe
			PAINT SPRYER, PRESSURE POT & FILTERS	🔒 Subscribe
	MAZAK	QT15	MAZAK QT15 CNC SPINDLES, CITIZEN 16MM, GRISETTI GRINDER, MORI CL, ENSHU, CINCINNATI MAZAK · QT15	🔒 Subscribe
	IEMCA	BARLOADER CHANNELS & PUSHER	IEMCA BARLOADER CHANNELS & PUSHER IEMCA · BARLOADER CHANNELS & PUSHER	🔒 Subscribe
			HYDRAULIC & HIGH-PRESSURE COOLANT PUMPS	🔒 Subscribe
	BRIDGEPORT		BRIDGEPORT PARTS LOT POWER FEED SHOWN IN THE PICTURE IS NOT INCLUDED. BRIDGEPORT	🔒 Subscribe
			DRO'S	🔒 Subscribe
		TRUNNION STOCK 66"	TRUNNION STOCK 66" TRUNNION STOCK 66"	🔒 Subscribe
	CHIRON		CHIRON ROTARY TABLE FANUC MOTORS CHIRON	🔒 Subscribe
			RIGGING EQUIPMENT & SUPPLY	🔒 Subscribe
	AGIE	PARTS & TOOLING STOCK 59	AGIE PARTS & TOOLING STOCK 59 AGIE · PARTS & TOOLING STOCK 59	🔒 Subscribe
			INSPECTION EQUIPMENT	🔒 Subscribe
			6 SHELVES OF CNC SERVO POWER CABLES FOR LATHES & MILLS	🔒 Subscribe
			BORING HEADS, BROUCHES	🔒 Subscribe
	THORLAB & NEW PORT		LAB INSPECTION COMPONENTS & PARTS THORLAB & NEW PORT MIRROR, LENSES STOCK 58" THORLAB & NEW PORT	🔒 Subscribe
	MAZAK, OKUMA, MORI SEIKI		MAZAK, OKUMA, MORI SEIKI CNC LATHE & MILLS ENCODERS, TOOL SETTER SHOWN IS NOT INCLUDED, 28 QUANTITY MAZAK, OKUMA, MORI SEIKI	🔒 Subscribe
			HYDRAULIC & AIR HOSESSTOCK 56"	🔒 Subscribe
			CNC MONITORS 13 QUANTITY STOCK 55"	🔒 Subscribe
			CNC LATHE & MILLS POWER SUPPLYS 50 + QUANTITY	🔒 Subscribe

Year	Make	Model	Description	Price
1997	OKUMA	GP47F	1997 OKUMA GP47F 16" X 60" CNC OD GRINDER WITH IN PROCESS GAGING SYSTEM S/N: 0811.053SPECIFICATIONS:SWING OVER TABLE: 16.93 INCHESMAXIMUM GRINDING DIAMETER: 15.75 INCHESMAXIMUM DISTANCE BETWEEN CENTERS: 59.06 INCHESMAXIMUM GRINDING WHEEL WIDTH: 6.03 INCHESMAXIMUM WORKPIECE WEIGHT BETWEEN CENTERS: 660 POUNDSGRINDING WHEEL SIZE (OD X W X ID): 30" X 6.30" X 12"WHEELHEAD (X-AXIS) .TRAVEL: 14.57 INCHESTRAVEL PER PULSE HANDLE REVOLUTION: 0.004", 0.039", 0.197"TRAVEL PER PULSE HANDLE GRADUATION: 0.00004", 0.0004", 0.0020"AUTO INFEED SPEED: 0.000047 - 236.22 IPMPOSITIONING SPEED: 708.66 IPMTABLE (Z-AXIS) TRAVEL: 72.83 INCHESTRAVEL PER PULSE HANDLE REVOLUTION: 0.004", 0.039", 0.197"TRAVEL PER PULSE HANDLE GRADUATION: 0.00004", 0.0004", 0.0020"AUTO INFEED SPEED: 0.000024 - 236.22 IPMPOSITIONING SPEED: 629.92 IPMWORKHEAD (C-AXIS) .CENTER HOLE: NO. 5 MTWORK SPINDLE SPEED (INFINITELY VARIABLE): 600 RPMFOOTSTOCKCENTER TAPER: NO. 5 MTAUTO SROKE (HYDRAULIC): 2.76 INCHESMOTORS WHEEL SPINDLE: 20 HPWORKHEAD (C-AXIS): 4.80 HPHYDRAULIC PUMP : 10 HPWHEELHEAD (X-AXIS): 1.6 HPTABLE DRIVE (Z-AXIS): 2.7 HPAPPROXIMATE WEIGHT: 21,000 LBS.EQUIPPED WITH:CONTROL OSP 5020GSAGEM MOVOMATIC IN PROCESS GAGING SYSTEMMODEL: CH-2034 PESEUXTYPE: 15342.00303 CYCLOTRON PAPERBAND COOLANTFILTRATION UNITMODEL: CTPX-30-120 MD20CH-H STOCK 12354	🔒 Subscribe
2007	MAZAK	MULTIPLEX 4300 MAZATROL FUSION 640T	2007 MAZAK MULTIPLEX 4300 MAZATROL FUSION 640TSPECIFICATIONS:CHUCK SIZE: (2) 10 CHUCKMAXIMUM SWING / CUTTING DIAMETER: 22.04 / 16.93MAX. CUT LENGTH CHUCK/SHAFT WORK: 8.86 / 22.04DISTANCE BETWEEN SPINDLE FACES: 9.842 57.09 X-AXIS TRAVEL: 12.2Z-AXIS TRAVEL: 23.8NO. TURRETS / POSITIONS: 2 POS. / 12 POS./EA. SPINDLE MOTOR 30 MIN./CONTIN.: 30 HP / 25 HPSPINDLE TORQUE: 362 FT. /LBS.SPINDLE NOSE / BORE / BAR CAPACITY: A2-8/3.46/3.03SPINDLE SPEED: 4000 RPMRAPID TRAVERSE: 945 IPMELECTRICAL REQUIREMENTS (MACH. ONLY) 106 KVAMACHINE DIMENSIONS (MACH. ONLY): 175X82.2X77MACHINE WEIGHT (ESTIM.): 24,000 LBS. EQUIPPED WITH:REAR EXIT CHIP CONVEYORAUTO CHK JAWS OPEN/CLOSESYNCHRONIZED Z AXISSIMPLE THRU SPINDLE AIR BLAST(2) 10 CHUCKSAUTOMATIC TOOL EYESTOOL LIFE MONITORINGABSOLUTE POSITIONING SYSTEM FRONT DOOR INTERLOCKSHYDRAULIC PRESSURE INTERLOCKSALL AVAILABLE TOOLING	🔒 Subscribe
	AMADA	COMA 567	AMADA COMA 567 CNC 50 TON TURRET PUNCH PRESS SN: C67648MODEL: 506072GENERAL SPECIFICATIONS: MAXIMUM TRAVERSE: 60 X 72MAXIMUM SHEET SIZE (WITH REPOSITIONING): 60 X 144MAXIMUM PUNCHING CAPACITY (MILD STEEL): 3/8MAXIMUM HITS PER MINUTE: 300MAXIMUM POSITIONING SPEED: 2000 INCHES PER MINUTETOTAL TOOL STATIONS IN TURRET: 72TURRET CONFIGURATION- THICK TURRETTURRET SPEED: 30 RPMAIR REQUIREMENT: 80 PSIMAIN MOTOR HORSEPOWER: 5.5 KWEQUIPPED WITHGE FANUC 6M CONTROLAUTO REPOSITIONINGHYDRAULIC CLUTCHBALL TRANSFER TABLECHIP CONVEYOR APPROXIMATE WEIGHT: 34,000 LBS.STOCK 12328	🔒 Subscribe
	FACTORY CAT	40-C XR SERIES	FACTORY CAT 40-C XR SERIES FLOOR SCRUBBER EXCELLENT CONDITION S/N: 76174	🔒 Subscribe
	FANUC	S420IF	FANUC S420IF 6 AXIS ROBOT 140 KG PAYLOAD RJ2 CONTROLLER WITH TECH PENDENTMODEL # S-420 IF6 AXIS140.0 KG PAYLOADRJ2 CONTROLLER WITH TEACH PENDANTH REACH 2850 MMREPEATABILITY .4000MMROBOT MASS 1600 KGSTRUCTURE ARTICULATED ROBOT SPEEDS:J1 90O/S ( 1.57 RAD/S)J2 100O/S ( 1.75 RAD/S)J3 90O/S ( 1.57 RADS/S)J4 210O/S (3.67 RAD/S)J5 150O/S (2.62 RAD/S)J6 210O/S (3.67 RAD/S) ROBOT RANGE:J1 180OJ2 + 72O 70OJ3 + 30O 105OJ4 300OJ5 130OJ6 360OS/N: 12528	🔒 Subscribe
	MAZAK	QT	MAZAK QT CNC LATHE BALL SCREWS	🔒 Subscribe
	TIMESAVER	137-1HP/75	TIMESAVER 137-1HP/75 DRY SINGLE BELT SANDER 37" S/N: 22330MSPECIFICATIONS:MAX. SANDING WIDTH: 37 CONTACT WHEEL: 6 DIA. MIN. SANDING LENGTH: 8 ADJUSTMENT: 0 8 SANDING BELT SIZE: 37 X 75 NUMBER OF HEADS: 1 CONTACT WHEEL DIAMETER: 6 CONVEYOR SPEED: 15-45 FPM MAIN MOTOR: 20 HP APPROXIMATE DIMENSIONS: 6'4" W X 5'8"D X 7'4" H APPROXIMATE WEIGHT: 3,200 LBS.	🔒 Subscribe
	AEM TIMESAVER	401-37 AAL	AEM TIMESAVER 401-37 AAL PROWET NET TYPE BELT SANDER - AEM TIMESAVER 401-37 AAL PROWET WET TYPE BELT SANDERBELT SPEED 3000 SFPMBELT SIZE 37" X 60"FEED SPEED 10-50 FPMCONTACT ROLLER DIAMETER 6"MINIMUM PART LENGTH 8"MILD STEEL, SS, ALUMINUMVOLTAGE 440/3/60MAIN MOTOR 20HPDRYERWEIGHT 4500LBS72" X 60" X 75"H S/N: 12265	🔒 Subscribe
1988	OKAMOTO	820A	1988 OKAMOTO 820A AUTOMATIC SURFACE GRINDER WITH DROTABLE SIZE: 8" X 20"LONGITUDINAL TABLE TRAVEL: 25.59"MAX. TABLE LOAD: 440 LBS.CROSS SADDLE TRAVEL: 9"MAX. DISTANCE UNDER WHEEL: 15.6"TABLE SPEED: 1- 83 FPMCROSS SADDLE FEEDS (INTERMITTENT): 0.02"- 0.8"CONTINUOUS CROSS SADDLE FEED: 4- 40 IPMAUTOMATIC SPINDLE DOWNFEED RATE (INCREMENTAL): 0.0002"- 0.0015"RAPID VERTICAL SPINDLE RATE: 19 IPMGRINDING WHEEL SIZE: 8" X 1" X 1 1/4"GRINDING MOTOR POWER: 2 HPAPPROX. MACHINE DIMENSIONS (L X W X H): 90" X 70" X 75"APPROX. MACHINE WEIGHT: 3,600 LBS. EQUIPPED WITHOS WALKER CHUCK CONTROL (SEE PIC)8" X 20" ELECTRO MAGNETIC CHUCKVARIABLE CHUCK CONTROLAUTO LUBE SYSTEMCOOLANT SYSTEMSPLASH GUARD BACKINGMAGNASCALE 2 AXIS DROOVERHEAD WHEEL DRESSERLIGHT STOCK S/N: 1250	🔒 Subscribe
	OKAMOTO	PSG-125	OKAMOTO PSG-125 20" X 48" AUTOMATIC HYDRAULIC SURFACE GRINDER EQUIPPED WITH: 20" X 48" ELECTRO-MAGNETIC CHUCK DRO CAPABLE GRINDING LENGTH: 48 CAPABLE GRINDING WIDTH: 20" DISTANCE UNDER 20" WHEEL TO TABLE TOP: 23.4" LONGITUDINAL TRAVEL OF TABLE: 51.22" CROSS TRAVEL OF COLUMN: 20.86" TABLE T-SLOT (NO. X WIDTH): 3 X 0.669" LONGITUDINAL FEEDS, FPM: 1-100 FPM HAND FEED PER REVOLUTION: .984" CROSS FEEDS, INTERMITTENT: .20-1.37" CROSS FEEDS, CONTINUOUS FPM: 1-16.4 FPM HAND FEED PER REVOLUTION: .2" GRADUATION OF HANDWHEEL: .001" VERTICAL HEAD FEEDS AUTOMATIC FEED PER TABLE STROKE: .0002"-.002" AUTO FEED PER COLUMN REVERSAL: .0002"-.002" GRADUATION OF HANDWHEEL: .0002" HAND FEED PER REVOLUTION: .04" VERTICAL RAPID FEED: 12" GRINDING WHEEL DIAMETER: 20" WIDTH: 2" BORE: 5" SPINDLE REVOLUTION: 1,100 RPM SPINDLE MOTOR: 10 HP HYDRAULIC PUMP MOTOR: 5 HP VERTICAL RAPID FEED MOTOR: 1/2 HP APPROX. FLOOR SPACE: 150" X 109" APPROX. WEIGHT: 13,200 LBS. ELECTRICS: 3 PHASE, 220-440 VOLT 20" X 48" ELECTRO MAGNETIC GRINDING CHUCK WALKER ELECTRO MAGNETIC CHUCK CONTROL COOLANT SYSTEM	🔒 Subscribe
2000	OKUMA	MA-650VB OSP U100M	2000 OKUMA MA-650VB OSP U100M 4 AXIS TABLE SIZE: 60.24 X 26 LOAD CAPACITY: 3,300 LBS. DISTANCE FROM FLOOR TO TABLE: 7.87 29.92 X-AXIS TRAVEL: 60.24 Y-AXIS TRAVEL: 26 Z-AXIS TRAVEL: 24 SPINDLE TAPER: CAT 50 SPINDLE SPEEDS (2 GEARED RANGES): 50-6,000 RPM SPINDLE MOTOR: 30 HP TOOL MAGAZINE CAPACITY: 48 POS. ATC MAX. TOOL DIAM./LENGTH: 9.31/15.75 TOOL CHANGE TIME: 2.4 SECONDS RAPID TRAVERSE RATES (X,Y,Z): 1,575 IPM / 1,181 IPM CUTTING FEEDRATES: 1181 IPM APPROX. MACHINE DIMENSIONS: 147.6 X 118 APPROX. MACHINE WEIGHT: 33,000 LBS. EQUIPPED WITH: COOLANT THRU SPINDLE RS 232 PORT INTERFACE RIGID TAPPING CHIP CONVEYOR AUGER STYLE CHIP CONVEYOR TSUDAKOMA 12 ROTARY TABLE WITH TRUNNION & TPC CONTROL 48 POSITION TOOL CHANGER HI-CUT HI G MAC MAN PULSE HANDLE COOLANT TANK & PUMP ALL AVAILABLE MANUALS	🔒 Subscribe
	AIRFLOAT	AF06017-3	AIRFLOAT AF06017-3 LIFT GUIDE AIR SKID 19 X 18 X 6 PLUS 3 STROKE = 9 H TOTAL 4,500 LBS. PER SKID CONTROL DEADMAN PENDENT HOSES STOCK 12002	🔒 Subscribe
	TCM	FCG2.5TTT	TCM FCG2.5TTT FORKLIFT THREE STAGE MASTS WITH SIDE SHIFTER 189" X 4500 LBS.	🔒 Subscribe
	LITHONIA LIGHTING	M47	LITHONIA LIGHTING M47 FLOODLIGHT METAL HALIDE WITH BULB 1000 WATTS	🔒 Subscribe
	MITUTOYO	78" X 50" X 12"	MITUTOYO 78" X 50" X 12" THICK CMM QUALITY GRANITE SURFACE PLATE	🔒 Subscribe
	MITUTOYO		MITUTOYO CMM GRANITE SURFACE PLATE 76" X 52" X 10" THICK	🔒 Subscribe
			3 PLASTIC LIQUID STORAGE TANKS 250 GALLON CAPACITY	🔒 Subscribe
			DIE SETS FOR PUNCH PRESS 17 SETS	🔒 Subscribe
	OKUMA		CNC LATHE, MILL Y,X,Z AXIS, SPINDLE SERVO MOTORS, FANUC, OKUMA, YASNAC, YASKAWA, 8 PALLETS, 84 MOTORS	🔒 Subscribe
	MAZAK OKUMA		CNC LATHE, MILLS PARTS	🔒 Subscribe
2009	GREENLEE	DIAMOND 1	2009 GREENLEE DIAMOND 1 X .040 178" L X 35/41 GRIT NO 406-442 NEW 37 PCS	🔒 Subscribe
			2 FORKLIFT BATTERY CHARGERS 24V & 36V	🔒 Subscribe
	AMADA	COMA 657	AMADA COMA 657 TURRET PUNCH PARTS & TOOLING	🔒 Subscribe
			CARDBOARD BOXES 3 PALLETS	🔒 Subscribe
			14 TON CAPACITY WALL MOUNTED JIB CRANE	🔒 Subscribe
		CU-24	AIR CHILLER CU-24 INDUSTRIAL MISTING FAN EVAPORATIVE COOLER - AIR CHILLER CU-24 INDUSTRIAL MISTING FAN EVAPORATIVE COOLER COVERED AREA 3000-3500 SF CFM AIRFLOW 12,000 CFM AIRFLOW SPEED @ 5 FT 21 MPH FAN SIZE 24" RUN TIME W/FULL TANK 32 GAL TANK - 4-5 HOURS AMP DRAW(110 VOLTS) 6.59 AMPS CIRCUIT BREAKER SIZE 15 AMPS POWER SUPPLY 1PH/110 VAC/60 HZ SIZE(H X W X D) 66 X 30 X 49 INCHES DISCHARGE TEMP DELTA 15-30 DEGREES (F) WEIGHT (EMPTY) 125 LBS NOISE LEVEL @ 10FT 68DB STOCK 12316"	🔒 Subscribe
			GRINDING WHEELS	🔒 Subscribe
	MAZAK & OKUMA		CNC LATHE MILL CNC AUTO LUBE PUMPS MAZAK & OKUMA	🔒 Subscribe
			CNC LATHE HYDRAULIC CHUCKS	🔒 Subscribe
	HITACHI SEIKI		HITACHI SEIKI LATHE CNC TAIL STOCKS GRISETTI GRINDER & CINCINNATI STOCK 75"	🔒 Subscribe
			LATHE TOOL HOLDERS	🔒 Subscribe
	MAKINO	A55 HMC	MAKINO A55 HMC SPARE PARTS	🔒 Subscribe
			PAINT SPRYER, PRESSURE POT & FILTERS	🔒 Subscribe
	MAZAK	QT15	MAZAK QT15 CNC SPINDLES, CITIZEN 16MM, GRISETTI GRINDER, MORI CL, ENSHU, CINCINNATI	🔒 Subscribe
	IEMCA	BARLOADER CHANNELS & PUSHER	IEMCA BARLOADER CHANNELS & PUSHER	🔒 Subscribe
			HYDRAULIC & HIGH-PRESSURE COOLANT PUMPS	🔒 Subscribe
	BRIDGEPORT		BRIDGEPORT PARTS LOT POWER FEED SHOWN IN THE PICTURE IS NOT INCLUDED.	🔒 Subscribe
			DRO'S	🔒 Subscribe
		TRUNNION STOCK 66"	TRUNNION STOCK 66"	🔒 Subscribe
	CHIRON		CHIRON ROTARY TABLE FANUC MOTORS	🔒 Subscribe
			RIGGING EQUIPMENT & SUPPLY	🔒 Subscribe
	AGIE	PARTS & TOOLING STOCK 59	AGIE PARTS & TOOLING STOCK 59	🔒 Subscribe
			INSPECTION EQUIPMENT	🔒 Subscribe
			6 SHELVES OF CNC SERVO POWER CABLES FOR LATHES & MILLS	🔒 Subscribe
			BORING HEADS, BROUCHES	🔒 Subscribe
	THORLAB & NEW PORT		LAB INSPECTION COMPONENTS & PARTS THORLAB & NEW PORT MIRROR, LENSES STOCK 58"	🔒 Subscribe
	MAZAK, OKUMA, MORI SEIKI		MAZAK, OKUMA, MORI SEIKI CNC LATHE & MILLS ENCODERS, TOOL SETTER SHOWN IS NOT INCLUDED, 28 QUANTITY	🔒 Subscribe
			HYDRAULIC & AIR HOSESSTOCK 56"	🔒 Subscribe
			CNC MONITORS 13 QUANTITY STOCK 55"	🔒 Subscribe
			CNC LATHE & MILLS POWER SUPPLYS 50 + QUANTITY	🔒 Subscribe

1997 OKUMA GP47F

CNC MACHINE CENTERS

1997 OKUMA GP47F 16" X 60" CNC OD GRINDER WITH IN PROCESS GAGING SYSTEM S/N: 0811.053SPECIFICATIONS:...

Hammer Price: 🔒

2007 MAZAK MULTIPLEX 4300 MAZATROL FUSION 640T

CNC MACHINE CENTERS

2007 MAZAK MULTIPLEX 4300 MAZATROL FUSION 640TSPECIFICATIONS:CHUCK SIZE: (2) 10 CHUCKMAXIMUM SWING /...

Hammer Price: 🔒

AMADA COMA 567

PRESSES & FORMING

AMADA COMA 567 CNC 50 TON TURRET PUNCH PRESS SN: C67648MODEL: 506072GENERAL SPECIFICATIONS: MAXIMUM ...

Hammer Price: 🔒

FACTORY CAT 40-C XR SERIES

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

FACTORY CAT 40-C XR SERIES FLOOR SCRUBBER EXCELLENT CONDITION S/N: 76174...

Hammer Price: 🔒

FANUC S420IF

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

FANUC S420IF 6 AXIS ROBOT 140 KG PAYLOAD RJ2 CONTROLLER WITH TECH PENDENTMODEL # S-420 IF6 AXIS140.0...

Hammer Price: 🔒

MAZAK QT

CNC MACHINE CENTERS

MAZAK QT CNC LATHE BALL SCREWS...

Hammer Price: 🔒

TIMESAVER 137-1HP/75

SURFACE FINISHING EQUIPMENT

TIMESAVER 137-1HP/75 DRY SINGLE BELT SANDER 37" S/N: 22330MSPECIFICATIONS:MAX. SANDING WIDTH: 37 CON...

Hammer Price: 🔒

AEM TIMESAVER 401-37 AAL

METALWORKING & FABRICATION EQUIPMENT

AEM TIMESAVER 401-37 AAL PROWET NET TYPE BELT SANDER - AEM TIMESAVER 401-37 AAL PROWET WET TYPE BELT...

Hammer Price: 🔒

1988 OKAMOTO 820A

METALWORKING & FABRICATION EQUIPMENT

1988 OKAMOTO 820A AUTOMATIC SURFACE GRINDER WITH DROTABLE SIZE: 8" X 20"LONGITUDINAL TABLE TRAVEL: 2...

Hammer Price: 🔒

OKAMOTO PSG-125

METALWORKING & FABRICATION EQUIPMENT

OKAMOTO PSG-125 20" X 48" AUTOMATIC HYDRAULIC SURFACE GRINDER EQUIPPED WITH: 20" X 48" ELECTRO-MAGNE...

Hammer Price: 🔒

2000 OKUMA MA-650VB OSP U100M

CNC MACHINE CENTERS

2000 OKUMA MA-650VB OSP U100M 4 AXIS TABLE SIZE: 60.24 X 26 LOAD CAPACITY: 3,300 LBS. DISTANCE FROM ...

Hammer Price: 🔒

AIRFLOAT AF06017-3

MISC

AIRFLOAT AF06017-3 LIFT GUIDE AIR SKID 19 X 18 X 6 PLUS 3 STROKE = 9 H TOTAL 4,500 LBS. PER SKID CON...

Hammer Price: 🔒

TCM FCG2.5TTT

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TCM FCG2.5TTT FORKLIFT THREE STAGE MASTS WITH SIDE SHIFTER 189" X 4500 LBS....

Hammer Price: 🔒

LITHONIA LIGHTING M47

MISC

LITHONIA LIGHTING M47 FLOODLIGHT METAL HALIDE WITH BULB 1000 WATTS...

Hammer Price: 🔒

MITUTOYO 78" X 50" X 12"

MISC

MITUTOYO 78" X 50" X 12" THICK CMM QUALITY GRANITE SURFACE PLATE...

Hammer Price: 🔒

MITUTOYO

MISC

MITUTOYO CMM GRANITE SURFACE PLATE 76" X 52" X 10" THICK...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

3 PLASTIC LIQUID STORAGE TANKS 250 GALLON CAPACITY...

Hammer Price: 🔒

PRESSES & FORMING

DIE SETS FOR PUNCH PRESS 17 SETS...

Hammer Price: 🔒

OKUMA

CNC MACHINE CENTERS

CNC LATHE, MILL Y,X,Z AXIS, SPINDLE SERVO MOTORS, FANUC, OKUMA, YASNAC, YASKAWA, 8 PALLETS, 84 MOTOR...

Hammer Price: 🔒

MAZAK OKUMA

CNC MACHINE CENTERS

CNC LATHE, MILLS PARTS...

Hammer Price: 🔒

2009 GREENLEE DIAMOND 1

MISC

2009 GREENLEE DIAMOND 1 X .040 178" L X 35/41 GRIT NO 406-442 NEW 37 PCS...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2 FORKLIFT BATTERY CHARGERS 24V & 36V...

Hammer Price: 🔒

AMADA COMA 657

METALWORKING & FABRICATION EQUIPMENT

AMADA COMA 657 TURRET PUNCH PARTS & TOOLING...

Hammer Price: 🔒

MISC

CARDBOARD BOXES 3 PALLETS...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

14 TON CAPACITY WALL MOUNTED JIB CRANE...

Hammer Price: 🔒

CU-24

INDUSTRIAL AND COOLING HEATING EQUIPMENT

AIR CHILLER CU-24 INDUSTRIAL MISTING FAN EVAPORATIVE COOLER - AIR CHILLER CU-24 INDUSTRIAL MISTING F...

Hammer Price: 🔒

MISC

GRINDING WHEELS...

Hammer Price: 🔒

MAZAK & OKUMA

CNC MACHINE CENTERS

CNC LATHE MILL CNC AUTO LUBE PUMPS MAZAK & OKUMA...

Hammer Price: 🔒

CNC MACHINE CENTERS

CNC LATHE HYDRAULIC CHUCKS...

Hammer Price: 🔒

HITACHI SEIKI

CNC MACHINE CENTERS

HITACHI SEIKI LATHE CNC TAIL STOCKS GRISETTI GRINDER & CINCINNATI STOCK 75"...

Hammer Price: 🔒

MISC

LATHE TOOL HOLDERS...

Hammer Price: 🔒

MAKINO A55 HMC

CNC MACHINE CENTERS

MAKINO A55 HMC SPARE PARTS...

Hammer Price: 🔒

MISC

PAINT SPRYER, PRESSURE POT & FILTERS...

Hammer Price: 🔒

MAZAK QT15

CNC MACHINE CENTERS

MAZAK QT15 CNC SPINDLES, CITIZEN 16MM, GRISETTI GRINDER, MORI CL, ENSHU, CINCINNATI...

Hammer Price: 🔒

IEMCA BARLOADER CHANNELS & PUSHER

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

IEMCA BARLOADER CHANNELS & PUSHER...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

HYDRAULIC & HIGH-PRESSURE COOLANT PUMPS...

Hammer Price: 🔒

BRIDGEPORT

MISC

BRIDGEPORT PARTS LOT POWER FEED SHOWN IN THE PICTURE IS NOT INCLUDED....

Hammer Price: 🔒

MISC

DRO'S...

Hammer Price: 🔒

TRUNNION STOCK 66"

COMMERCIAL PRINTING & BINDERY EQUIPMENT

TRUNNION STOCK 66"...

Hammer Price: 🔒

CHIRON

CNC MACHINE CENTERS

CHIRON ROTARY TABLE FANUC MOTORS...

Hammer Price: 🔒

MISC

RIGGING EQUIPMENT & SUPPLY...

Hammer Price: 🔒

AGIE PARTS & TOOLING STOCK 59

METALWORKING & FABRICATION EQUIPMENT

AGIE PARTS & TOOLING STOCK 59...

Hammer Price: 🔒

MISC

INSPECTION EQUIPMENT...

Hammer Price: 🔒

MISC

6 SHELVES OF CNC SERVO POWER CABLES FOR LATHES & MILLS...

Hammer Price: 🔒

MISC

BORING HEADS, BROUCHES...

Hammer Price: 🔒

THORLAB & NEW PORT

MISC

LAB INSPECTION COMPONENTS & PARTS THORLAB & NEW PORT MIRROR, LENSES STOCK 58"...

Hammer Price: 🔒

MAZAK, OKUMA, MORI SEIKI

CNC MACHINE CENTERS

MAZAK, OKUMA, MORI SEIKI CNC LATHE & MILLS ENCODERS, TOOL SETTER SHOWN IS NOT INCLUDED, 28 QUANTITY...

Hammer Price: 🔒

MISC

HYDRAULIC & AIR HOSESSTOCK 56"...

Hammer Price: 🔒

MISC

CNC MONITORS 13 QUANTITY STOCK 55"...

Hammer Price: 🔒

CNC MACHINE CENTERS

CNC LATHE & MILLS POWER SUPPLYS 50 + QUANTITY...

Hammer Price: 🔒

1 2 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Moving No Reserve CNC Conventional Equipment Pallet Size Lots Servo Boards Motors Fanuc Okuma Yaskawa Yasnac Repair Parts Rigging

Save to Project Folder

Print Options

Save to Project Folder