Plant Machinery Commercial Vehicles Includes Forklifts Containers Trucks Trailers Quad Bikes Excavators Site Cabins Equipment

WELDER EARTH CLAMP PLUS EXTENSIONS APPROXIMATELY 10M (30FT) ALL CONNECTED

STAINLESS STEEL MIG WELDING WIRE 309L & 316L

TWO AXLE STANDS SUITABLE FOR 4X4S

2023 VOLVO A25G ARTICULATED HAULER - FULL VOLVO SERVICE HISTORY YEAR - 2023 HOURS - 3,094 TAILGATE BRIGADE BACKSENSE VOLVO CO-PILOT ON-BOARD WEIGHING GREEN SEATBELT BEACON AIRCON, AUTOLUBE REV CAMERA TYRES 35%

2023 VOLVO A25G ARTICULATED HAULER - FULL VOLVO SERVICE HISTORY (2,789 HOURS) FULL TAILGATE SIDE EXTENSIONS VOLVO CO-PILOT BRIGADE BACKSENSE GREEN SEAT BELT BEACON AIRCON AUTOLUBE REVERSE CAMERA TYRES 57%

BOSS ACCESS TOWERS AND PLATFORMS - OVER 2,000 PIECES, ARMORGARD CUTTING STATIONS, TUFFBANK LOCKBOXES, CHEMICAL STORES ACCESS EQUIPMENT, LEVPANO PLASTERBOARD LIFTERS

2007 CONCRETE RECYCLING CRUSHER, CUSTOM BUILT, BELT PROTECTION, TWIN MAGNETS, PEGSON JAW, SPARE TEETH. 1100 X 650. WOULD SUIT LARGE RECYCLING PLANT OR DEMOLITION PROJECT. PURPOSE BUILT TO TAKE LARGE REINFORCED ELEMENTS.

2019 DAF CF EURO 6 32 TON TIPPER APPROX 164,450 MILES OR 264,658 KMS MOT TO 31/12/25 CONDITION USED APPROXIMATE MILEAGE 164450 MILES OR 264,658 KM'S VALID MOT TO 31ST DECEMBER 2025 - NO ADVISORIES REG. MARK **69 *** EXTERIOR COLOUR WHITE HORSEPOWER (BHP) 462 ENGINE SIZE 10837 MODEL YEAR 2019 MANUFACTURER DAF TRUCKS MODEL CF TYPE TIPPER DRIVE SIDE RIGHT-HAND DRIVE FUEL TYPE DIESEL YEAR OF FIRST REGISTRATION 2019 GROSS VEHICLE WEIGHT 3200 VEHICLE MAKE: DAF VEHICLE MODEL: CF 450 TIPPER YEAR: 2019. MOT: 2024. KEYS: 1 KEYS SERVICE HISTORY: COMPREHENSIVE OPTIONS: STEEL TIPPING BODY MANUAL GEARBOX EURO 6 FURTHER DETAILS: COMPREHENSIVE SERVICE FOLDER, LONG TEST, REFURBISHED BODY EURO 6 TIPPER

2017 ATLAS 350 MH MATERIAL HANDLER (12K HOURS) MANUFACTURER - ATLAS MODEL 350 MH MATERIAL HANDLER 12K HOURS

2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES. 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER. INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM. DONALDSON CHILLER INCLUDED.

[OMME 1750 RBD] DUAL FUEL TRACKED SPIDER LIFT - ACCESS PLATFORM - CHERRY PICKER MAX WORKING HEIGHT: 57 FEET (17.7 METERS) MAX OUTREACH: 30 FEET (9.3 METERS) PLATFORM CAPACITY: 440 LBS (200 KG) PLATFORM SIZE: 4.1 FEET X 2.4 FEET (1.25M X 0.74M) STOWED DIMENSIONS: LENGTH 21.3 FEET (6.5 METERS), WIDTH 4.1 FEET (1.25 METERS), HEIGHT 6.9 FEET (2.1 METERS) WEIGHT: 4,630 LBS (2,100 KG) POWER OPTIONS: DUAL POWER (DIESEL AND 24V DC ELECTRIC) FOR MAXIMUM FLEXIBILITY ON ALL JOB SITES DRIVE SYSTEM: TRACKED CHASSIS FOR EXCELLENT STABILITY AND MANEUVERABILITY, EVEN ON UNEVEN OR SLOPED TERRAIN. ROTATION: 360-DEGREE CONTINUOUS TURRET ROTATION FOR FLEXIBLE POSITIONING JIB ARTICULATION: HYDRAULIC ARTICULATING JIB ALLOWS PRECISE MOVEMENT, PERFECT FOR TRICKY AND TIGHT SPACES. GRADEABILITY: HANDLES UP TO 40% GRADIENT WITH EASE. OUTRIGGERS: HYDRAULIC, MULTI-POSITION OUTRIGGERS PROVIDE A STABLE AND SECURE BASE ON ROUGH OR SLOPED SURFACES. SAFETY FEATURES: LOAD-SENSING SYSTEM, EMERGENCY LOWERING SYSTEM, AUTOMATIC LEVELING, AND FULL HARNESS ATTACHMENT POINTS FOR MAXIMUM WORKER SAFETY.

2010 LIEBHERR R934C SCRAP HANDLER (13,500 HOURS) LIEBHERR R934C SCRAP HANDLER GOOD CONDITION AND WORKS WELL GOOD UNDERCARRIAGE, HYDRAULIC HIGH RISE CAB AND LONG REACH REHANDLING ARM

2011 TOYOTA 7 TONNE DIESEL ONLY 2609 HOURS FULL CAB SPARE 3RD & 4TH SERVICE

2018 MERCEDES-BENZ ACTROS 2546L 6X2 DRAWBAR C/W HIAB 145 DL-1 HI PRO LOADER CRANE WITH MTE BODY & TRAILER VRN - AY18 JXA 440,265 KM'S / 273567 MILES EURO 6 460 BHP, AUTOMATIC SINGLE SLEEPER REAR LIFT AXLE MICROWAVE, IN CAB CRANE CONTROL, GRAB CRANE, SUPPORT LEGS COLOUR: BLUE FUEL TYPE - DIESEL DATE REGISTERED - 29 JUNE 2018 ANNUAL TEST VALID UNTIL - 30 APRIL 2025

2015 JCB 940 ROUGH TERRAIN FORKLIFT 4X4, 6137 HOURS - 4 TONNE LIFT 4 SPEED 5.5 METRE LIFT WITH SIDE SHIFT TOYOTA OIL LOW HOURS VERY GOOD TYRES ALL ROUND

CATERPILLAR 7 TONNE DIESEL FORKLIFT WITH FORK POSITION & SIDE SHIFT, 5566 HOURS - CATERPILLAR 7 TONNE DIESEL FORKLIFT WITH FORK POSITIONER AND SIDE SHIFT 4M MAST LOW 5566 HOURS JUST HAD BRAND NEW TYRES FITTED TO REAR COSTING NEARLY 1000 GOOD CONDITION ALL ROUND, TRUCK IS VERY ORIGINAL

2006 MANITOU M26 2.6 TONNE 4WD ROUGH TERRAIN FORKLIFT, 3675 HOURS, 5.5M LIFT, SIDE SHIFT. BUCKET ALSO AVAILABLE AT ADDITIONAL COST.

2021 MITSUBISHI CANTER FUSO 3C13, 62895 MILES, WITH RAPIDE TANKER, BATTONI 2000 PUMP & HONDA ENGINE - 2021 MITSUBISHI FUSO CANTER 3C13 USED FOR EMPTYING WASTE FROM PORTALOOS AND SIMILAR STRUCTURES 62895 MILES REGISTRATION KV70 XOU REGISTERED 28TH JANUARY 2021 DIESEL MOT EXPIRED 19TH MAY 2025 MILEAGE ON LAST MOT ON 20TH MAY 2024 WAS 58,471 MILES WITH RAPID TANKER, BATTONI MAC 2000 PUMP AND HONDA ENGINE HAS 2 TOOL BOXES AND REVERSING CAMERA

2017 JCB JS20MH REHANDLER (14K HOURS) HYDRAULIC HIGH RISE CAB, SOLID TYRES, LONG REACH ARM AND ROTATING SELECTOR GRAB

2020 BOBCAT E27Z EXCAVATOR ONLY 1531 HOURS QUICK HITCH 3 BUCKETS DOUBLE ACTING HAMMER LINES PROPORTIONAL CONTROLS CE MARKED

DOOSAN 3.5 TONNE ELECTRIC FORKLIFT, DEMO TRUCK ONLY 11 HOURS!!, CONTAINER SPEC, CHARGER INCLUDED. 3.5 TONNE LIFT, EX DEMO ONLY 11 HOURS FROM NEW. TRUCK IS AS NEW WITH A BRAND NEW BATTERY WHICH HAS JUST BEEN FITTED. 4.2M TRIPLE MAST WITH SIDE SHIFT. SAFETY CERTIFICATE AND DELIVERY INCLUDED.

1964 FORD MUSTANG D-CODE (289 V8) REGISTERED 15TH DECEMBER 1964 - 65,255 MILES - 1964 FORD MUSTANG D-CODE (289 V8) REGISTERED 15TH DECEMBER 1964 - 65,225 MILES YEAR - 1964 MILEAGE - 65,255 METALLIC PAINT - YES PREVIOUSLY REGISTERED OVERSEAS - YES BODY TYPE - COUPE NUMBER OF SEATS - 4 TRANSMISSION - AUTOMATIC SERVICE HISTORY AVAILABLE - YES EXTERIOR COLOUR - GREY FUEL TYPE - PETROL DRIVE SIDE - LEFT-HAND DRIVE FUEL - PETROL MODEL - V8 MANUFACTURER - FORD NUMBER OF DOORS - 2 INTERIOR COLOUR - BLACK COUNTRY/REGION OF MANUFACTURE - UNITED STATES ENGINE - 289 V8 V5C REGISTRATION DOCUMENT - PRESENT 196412 FORD MUSTANG D-CODE 289 V8 15TH DECEMBER 1964 GENUINELY GOOD CONDITION AND READY TO DRIVE. THE CAR HAS BEEN RESPRAYED IN RECENT YEARS, AND THE PAINTWORK IS IN GOOD SHAPE, BOASTING A DEEP SHINE THAT LOOKS FANTASTIC IN THE SUN (FORD MAGNETIC GREY METALLIC). THE CHROME IS ALSO IN GOOD CONDITION, WITH ONLY A MINOR MARK ON THE REAR BUMPER, WHICH IS HARDLY NOTICEABLE UNLESS YOU'RE LOOKING UNDERNEATH. MECHANICALLY, STARTS IN LESS THAN HALF A TURN FIRES STRAIGHT UP, PULLS SMOOTHLY THROUGH ALL GEARS, WITH EVERYTHING WORKING AS IT SHOULD. IT SOUNDS LIKE A TRUE V8, TURNING HEADS WHEREVER IT GOES. THE ENGINE RUNS SMOOTHLY. STORED IN THE VENDORS GARAGE - PHOTOS OF THE CAR WHEN IT ARRIVED FROM THE STATES ABOUT 6-7 YEARS AGO ARE PRESENT AND PURCHASED IT FROM A MUSTANG DEALER IN THE UK. LOTS OF HISTORY WITH THE CAR DATING BACK YEARS TO SHOW RECEIPTS OF REBUILD AND OTHER WORK CARRIED OUT CAR HISTORY FULL ORIGINAL ENGINE REBUILD IN THE STATES ( 9-05-2015 AT 63,987.9 KM ) ONLY LESS THAN 1200 KM'S AGO BUILD : DEARBORN BUILD DATE : 15TH DECEMBER 1964 ORIGINAL COLOUR : SPRINGTIME YELLOW SOLD FROM 53 DISTRICT KANSAS CITY KEY FEATURES AND RECENT WORK SPEC D CODE 4V 289 V8 3 SPEED C4 AUTO GEARBOX EDELBROCK PERFORMER PACKAGE EDELBROCK PERFORMER CAM + LIFTERS EDELBROCK PERFORMER MANIFOLD EDELBROCK 4V CARBURETTOR HI-PO AIR CLEANER HI-PO VALVE COVERS MONTE CARLO BAR REBUILT SERVO ASSISTED BRAKES (NEW) REBUILT SUSPENSION NEW FRONT DAMPERS REAR AIR LIFT DAMPERS NEW FUEL TANK AND SENDER POWER STEERING ELECTRIC COOLING FAN (ENGINE) GOOD INTERIOR NO RIPS AND TEARS RPM DIGITAL DIAL AND PRESSURE HEATER RADIO SEAT BELTS LEGEND SERIES ALLOYS ADDITIONAL DETAILS: NEW BATTERY RECENTLY FITTED ORIGINAL LIGHTS WILL BE REINSTALLED BEFORE THE SALE TIDY BODYWORK UNDERNEATH GOOD TIRE TREAD HAS BEEN TREATED UNDERNEATH READY FOR THE NEW OWNER (PICTURES IN THE LISTING)

2010 LIEBHERR 934C SCRAP HANDLER (15,500 HOURS) HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH REHANDLING ARM

2011 JCB JS160 REHANDLER (9500 HOURS) GOOD CONDITION, HYDRAULIC HIGH RISE CAB AND SOLID TYRES

2014 VOLVO FMX GRABBER TIPPER 414217KM / 257382 MILES MOT TO 30TH SEP 2025 LAST MOT PASS 24/9/24 WITH NO ADVISORIES PALFINGER EPSILON M125L CLASSIC CRANE 8 WHEELER EURO 6

PBP CBX30 MOBILE CONCRETE BATCHING PLANT WITH LAB - PBP CBX30 MOBILE MIXING PLANT WITH LAB FRENCH COMPANY SPECIALISING IN CIVIL ENGINEERING EQUIPMENT. THE BADGE VISIBLE ON THE MACHINE CONFIRMS ITS ORIGIN. THIS UNIT IS DESIGNED FOR ON-SITE CONCRETE PRODUCTION AND INCLUDES AN INTEGRATED FIELD LAB, HOPPER, AND GENERATOR. GENERAL SIGNS OF USE INCLUDES: - MASTERPOWER MBD120 DIESEL GENERATOR 3 PHASE 400/230V 174AMPS 1500RPM 4M11G120/5, SERIAL NUMBER 4720A000023 WORKING HOURS ON THIS GENERATOR WERE NOT ABLE TO BE RECORDED AS NO KEY AVAILABLE - FIELD LAB WITH COMPUTER SET UP - ALL IN A TRUCK BED - SEVERAL ELECTROMAGNETIC FLOW METERS - SEVERAL ELECTROMAGNETIC POSITIONERS - LARGE HOPPER (THERE ARE NO KEYS FOR GENERATOR AND LAB ROOM) APPROXIMATE DIMENSIONS: HEIGHT - 413CM WIDTH - 290CM LENGTH - 1300CM

2018 HELI 4 TONNE DIESEL FORKLIFT, ONLY 818 HOURS, 3.9M FULL FREE LIFT TRIPLE MAST, SIDE SHIFT

CATERPILLAR 4 TONNE DIESEL FORKLIFT TRIPLE MAST 5084 HOURS 4.6M MAST WITH SIDE SHIFT ORIGINAL TRUCK 4 TONNE LIFT LOW 5084 HOURS DIESEL ENGINE PART CAB RECENT NEW TYRES GOOD CONDITION ALL ROUND

2012 LINDE H80D 8 TONNE DIESEL FORKLIFT, 9721 HOURS, LONG FORKS 5.6 METRE LIFT GOOD TYRES ALL ROUND

2014 ESSEMTEC COBRA-8C - MODEL F8X2/T-V2 8MM HYQ TAPE FEEDER NOW INCLUDES PICK/PLACE MACHINE. EQUIPMENT: 8MM HYQ TAPE FEEDER MAKE: ESSEMTEC COBRA-8C MODEL: F8X2/T-V2 MANUFACTURE DATE: 2014 NOW INCLUDES PICK & PLACE MACHINE AND 2 X CARTRIDGES. THE ESSEMTEC 8MM HYQ TAPE FEEDER IS DESIGNED FOR USE WITH THE ESSEMTEC COBRA/8C AND MDS 720 PICK AND PLACE MACHINES. THIS TAPE FEEDER ENSURES EFFICIENT AND RELIABLE COMPONENT FEEDING, CONTRIBUTING TO THE OVERALL PRODUCTIVITY AND ACCURACY OF THE ASSEMBLY PROCESS. THE ESSEMTEC 8MM HYQ TAPE FEEDER IS A HIGH-PRECISION, DURABLE, AND VERSATILE COMPONENT FEEDING SOLUTION FOR THE ESSEMTEC COBRA/8C AND MDS 720 PICK AND PLACE MACHINES. WITH ITS ROBUST CONSTRUCTION, USER-FRIENDLY OPERATION, AND EFFICIENCY, IT IS AN ESSENTIAL COMPONENT IN ENSURING ACCURATE AND RELIABLE SMT ASSEMBLY. THIS TAPE FEEDER IS WELL-SUITED FOR HIGH-SPEED PRODUCTION ENVIRONMENTS, CONTRIBUTING TO IMPROVED PRODUCTIVITY AND CONSISTENT PLACEMENT QUALITY. APPROXIMATE DIMENSIONS - WIDTH: 50 MM (1.97 INCHES) - DEPTH: 200 MM (7.87 INCHES) - HEIGHT: 100 MM (3.94 INCHES) - WEIGHT: 1 KG (2.2 LBS) SERIAL NO: 1114010 MODEL NO: F8X2/T-V2

LUXURY SHEPHERDS HUT - METICULOUSLY CONSTRUCTED OVER RECENT YEARS USING ONLY TOP-QUALITY MATERIALS. PREMIUM SPECIFICATIONS: ROBUST FOUNDATION: CUSTOM-BUILT STEEL CHASSIS. SUPERIOR INSULATION: 100MM CELOTEX INSULATION WITH 18MM PHENOLIC PLYWOOD (RHINO BOARD) ABOVE AND BELOW. QUALITY CONSTRUCTION: SOLID 4"X2" FRAMEWORK THROUGHOUT. ELEGANT EXTERIOR: PREMIUM SIBERIAN LARCH CLADDING. WEATHER-PROOF DESIGN: REHAU DOUBLE-GLAZED UPVC WINDOWS AND DOOR. DURABLE ROOFING: TAPCO ROOF SLATES (HIGH-GRADE COMPOSITE). GENEROUS DIMENSIONS: EXTERNAL: LENGTH: 9275MM (30.4FT), WIDTH: 3090MM (10.1FT), HEIGHT: 3840MM (12.6FT). INTERNAL: LIVING AREA: 5123MM X 2745MM (16.8FT X 9FT), BATHROOM SPACE: 1613MM X 1550MM (5.3FT X 5.1FT), BEDROOM AREA: 2043MM X 2745MM (6.7FT X 9FT). THE EXTERIOR IS COMPLETELY FINISHED TO AN EXCEPTIONAL STANDARD, WHILE THE INTERIOR REMAINS A BLANK CANVAS AWAITING YOUR CREATIVE VISION. PERFECT FOR: LUCRATIVE AIRBNB RENTAL, LUXURY GLAMPING ACCOMMODATION, HOME OFFICE/STUDIO, GUEST ACCOMMODATION, GARDEN RETREAT.

2016 MERCEDES ATEGO 1318 4X2 COMPLETE WITH TAIL RAMP & WINCH, 139827 MILES REG NUMBER GN66 OVB NUMBER OF KEYS - 2 SERVICE AND MOT HISTORY VEHICLE IS MOT'D UNTIL FEBRUARY 2026

2017 GENIE Z45/25 BI ENERGY BOOM LIFT (ONLY 450 HOURS) YEAR OF MANUFACTURE - 2017 MANUFACTURER - GENIE MODEL - Z45/25 BI-ENERGY RUNNING HOURS - 450 (AS SHOWN ON CLOCK COUNTER) THE MACHINE HAS BEEN FULLY PREPPED AND SERVICED WORKS CARRIES OUT INCLUDE: (1). WASHED AND INSPECTED ON ARRIVAL (2). NEW TVH BATTERY FITTED (START BATTERY). (3). FULL SERVICE UNDERTAKEN, INCLUDING: AIR FILTER CHANGE OIL FILTER CHANGE FUEL FILTER CHANGE HYDRAULIC FILTER CHANGE ENGINE OIL CHANGE (10W40). (4). THE MACHINE HAS HAD A NEW START BATTERY FITTED - ALSO THE MAIN BATTERY HAD BEEN CHARGED FULLY CHARGED. BOTH A SPECIFIC GRAVITY TEST AND A LOAD TEST ON THE MAIN BATTERY (TO ESTABLISH BATTERY'S "HEALTH") HAVE BEEN CONDUCTED. SPECIFIC GRAVITY TEST: 1,255 -1,260 (ABOUT 98% OF BRAND NEW). LOAD TEST: 7 OF THE 8 SMALLER BATTERIES MAKING UP THE MAIN BATTERY ARE HOLDING FULL 6V (EVEN 6.1V) - THEY HOLD 100% CHARGE. BATTERY NO 8 HAS DROPPED TO 4.2 V (AFTER FEW WEEKS) - SO IT'S ABOUT 70% OF NEW/FULL CHARGE, AND WILL BE REPLACED WITH A NEW BATTERY BEFORE COLLECTION. A FULL SERVICE HAS ALREADY BEEN DONE, A NEW START BATTERY FITTED, A NEW OPERATOR MANUAL IS INCLUDED WITH THE MACHINE, AND THE MAIN BATTERY IS IN CLOSE TO 100% HEALTH.

2018 DOOSAN 4.5 TONNE DIESEL FORKLIFT, ONLY 1553 HOURS, CONTAINER SPEC, 4M MAST WITH 3RD & 4TH

2012 JCB TLT30D 3 TONNE 2WD ROUGH TERRAIN FORKLIFT, ONLY 3396 HOURS, 4M BOOM GOOD TYRES ALL ROUND

2021 HABRAKEN HM814-D WORKSTATION FOR SIDE AIRBAG COVER SEWING HABRAKEN SIDE AIRBAG COVER WORKSTATION. (USED TO SEW IN AIRBAGS AND LABELS FOR CAR SEAT COVERS). HM814-D - WORKSTATION FOR SIDE AIRBAG COVER SEWING YEAR 2021

2017 YANMAR SV26 EXCAVATOR 2640 HOURS QUICK HITCH 3 BUCKETS DOUBLE ACTING LINES CE MARKED

2007 LINDE H50D 5 TONNE DIESEL FORKLIFT TRUCK, 4 METRE LIFT, FORK POSITIONER, DIESEL, 12184 HOURS - LINDE H50D DIESEL FORKLIFT TRUCK 4 METRE LIFT FORK POSITIONER DIESEL ENGINE 12184 HOURS 5 TONNE LIFT CAPACITY FORK POSITIONER VERY GOOD TYRES NEW 2M FORKS

2007 LINDE H4.5D TONNE DIESEL FORKLIFT, 4100MM LIFT, RECENT NEW TYRES, 7223 HOURS - 2007 LINDE 4.5 TONNE DIESEL FORKLIFT 4100MM LIFT LIFTING CAPACITY 4500KG RECENT NEW TYRES ALL ROUND 2007 MODEL 7223 HOURS WELL MAINTAINED

2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516 YEAR OF MANUFACTURE 2018 CONDITION: USED, GOOD

2020 UNIFY HIGH FREQUENCY MACHINE CONDITION: USED, GOOD

LINDE H40 DIESEL FORKLIFT WITH FULL HEATED CAB 3954 HOURS BRAND NEW SIDE SHIFT AND FORKS HAVE NOW BEEN FITTED 4 TONNE LIFT VERY WELL MAINTAINED 3.1M MAST WITH 4TH SERVICE FULL HEATED CAB

2011 DOOSAN FORKLIFT TRUCK 7000KG CAPACITY 5000 MM LIFT HEIGHT TRIPLEX. YEAR 2011 3600 HOURS PARTIAL WEATHER PROTECTION CABIN. 1500MM LONG FORKS. NEW REAR TYRES AND SUSPENSION SEAT. VERY RECENT SERVICE, LOLER AND REPAIRS COMPLETED.

2014 CATERPILLAR 4 TONNE DIESEL FORKLIFT (4,871 HOURS) CATERPILLAR FORKLIFT TRUCK 4 TONNE LIFT 4M MAST WITH SIDE SHIFT LOW HOURS - 4,781 HOURS GOOD CONDITION ALL ROUND - TRUCK IS VERY ORIGINAL

2007 CHRYSLER JEEP WRANGLER, 74,000 MILES FROM NEW, PRIVATE PLATE NOT INCLUDED, REGISTRATION NUMBER WILL BE GP07UEA, FEATURES INCLUDE: TOUCH SCREEN APPLE PLAY ELECTRIC WINDOWS AIR CONDITIONING (NEEDS RE-GASSING) LEATHER INTERIOR FULL HISTORY PREVIOUS OWNER HAD OWNED FOR A LONG PERIOD OF TIME AND HISTORY HANDED OVER IMPORTED ACCESSORIES SUCH AS ROCK STAR WHEELS, BONNET AND ROOF RACK WITH LADDERS, UPGRADED FRONT AND BACK BUMPERS TOW BAR WITH ELECTRICS REMOVABLE HARDTOP ORIGINAL BONNET, STEREO AND POSSIBLY BUMPERS CAN BE INCLUDED IF DESIRED DOMESTICALLY IN GOOD CONDITION WITH NO RUST ON BODYWORK OR CHASSIS A FEW AGE RELATED MARKS BUT WOULD BE RESOLVED WITH A VALET MESH MISSING FROM BONNET INLET DOESN'T SHOW ON DASH WHEN GEAR IS SELECTED, DRIVES FINE BUT LACKS A LITTLE POWER - CHANGING A FUSE FOR THE OUTBOX SOLENOID RESOLVES THIS ISSUE BUT THE FUSE KEEPS BLOWING NO FAULT CODES APPEAR WHEN PUT ON THE COMPUTER AT GARAGE POWER STEERING/ABS LIGHT INTERMITTENTLY COMES ON AND HAVE BLOWN 2 STEERING PUMPS - THE POWER STEERING BOX HAS BEEN PROFESSIONALLY REFURBISHED TWICE

[YILMAZ] AIM 4410 ALUMINIUM MACHINING CENTRE MODEL TYPE - AIM 4410 RATED CURRENT NOMINAL AKIM - 16 A 20000 RPM 250 LT/MIN 14 KW 6 BAR 400V AC 3P PE WEIGHT - 3200KG W - 670CM / H - 220 / L - 325CM

2017 TOYOTA 2.5 TONNE DIESEL FORKLIFT 6124 HOURS 6M TRIPLE MAST SIDE SHIFT SPARE 4TH SERVICE

2011 VOLVO L110F LOADING SHOVEL (22,000 HOURS) VERY GOOD CONDITION WITH CE MARK, THIRD LINE, HIGH TIP BUCKET 22,000 HOURS

2016 DAF CF370 26T DUAL TEMP FRIDGE TAIL-LIFT - APPROX 502,618 KMS / 312312 MILES - PF16UCM - 2016 DAF CF370 26T DUAL TEMP FRIDGE TAIL-LIFT APPROXIMATELY 502,618 KMS / 312312 MILES EURO 6 370BHP SINGLE SLEEPER, AUTOMATIC, DUAL TEMP, CARRIER VECTOR FRIDGE, INTERNAL DOORS ENGINE HOURS: 15790 502,618 KM'S DAF CF 370 FAN COLOUR - WHITE FUEL TYPE - DIESEL DATE REGISTERED - 4 JULY 2016 ANNUAL TEST EXPIRED ON - 30 SEPTEMBER 2023

2015 SCANIA P410 TIPPER 8 X 4 WHEEL, APPROXIMATELY 533,000KM/311,000 MILES - SCANIA P410 TIPPER 8 X 4 WHEEL REGISTRATION BG15 EJD 2015 MODEL DATE FIRST REGISTERED 12TH JUNE 2015 DIESEL MOT VALID UNTIL 30/4/25 APPROXIMATELY 533,000 KM'S / 311,000 MILES