CNC and Fabrication Machinery Surplus in Multiple Locations

Revelation Auctions

Category: CNC MACHINE CENTERS

Total Lots: 173

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 101–150 of 173 lots

Year	Make	Model	Lot Description	Hammer Price
	MARVEL	81/9	MARVEL SERIES 81/9 VERTICAL BAND SAW, ELECTRICAL: 460V, 3-PHASE MARVEL · 81/9	🔒 Subscribe
2005	DAVI YSTAD	1/4 X 10	2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD - BEND WIDTH: 10 BEND THICKNESS: 1/4 MAX BEND ANGLE: 135 DEGREES BACK GAUGE TABLE SIZE: 10 X 10 STROKE OF UPPER BENDING BEAM: 28 OF TRAVEL ELECTRICAL: 460 V / 3 PH EQUIPPED WITH: MITSUBISHI CONTROLLER, 10 AXIS SYSTEM, CNC CROWNING ON TOP AND BOTTOM, 10 X 10 BACK GAUGE TABLE, FLAT BLANK LOAD AND PARTS UNLOAD SYSTEM, DATA M LASER BEND ANGLE CONTROL 2005 · DAVI YSTAD · 1/4 X 10	🔒 Subscribe
2023	ARMFIELD	FT102XA	2023 ARMFIELD FT102XA CARBONATOR & FILLER - PILOT-SCALE BEVERAGE CARBONATION & FILLING SYSTEM, CARBONATION CAPACITY UP TO 30 L/HOUR (VARIES BY PRODUCT), CO2 INJECTION CONTROL ELECTRONIC MASS-FLOW CONTROLLER, PRODUCT TEMPERATURE 2 C - 20 C ADJUSTABLE, FILLING TYPE COUNTER-PRESSURE, AUTOMATIC, MATERIALS 304/316 STAINLESS STEEL, UTILITIES 120 V/230 V AC, COMPRESSED AIR (5 BAR), CO2 SUPPLY, DIMENSIONS APPROX. 48 L 28 W 60 H, WEIGHT APPROX. 275 LB (125 KG), CAPPER ENABLING SYSTEM CROWN CAP SEALER SCREW CAP SEALER, FILING HEAD FOR CANS INTEGRAL CAN SEAMER, VACUUM SYSTEM, SYRUP DOSING SYSTEM, PET BOTTLENECK SUPPORT 2023 · ARMFIELD · FT102XA	🔒 Subscribe
	EGAN	17	3.5" 32:1 L/D EGAN EXTRUDER, 150HP, ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), TOP VENTED, PLUGGED BARREL AT APPROXIMATELY 52" CENTER LINE HEIGHT. GEARBOX: REDUCTION RATIO OF 7:1, BELT DRIVEN, 150 HP D/C MOTOR, 312 DIAMETER ROUND ON CENTER FEED THROAT ENTRANCE. BERINGER 4.5 MODEL 17 SCREEN CHANGER. LESS HYDRAULIC CYLINDER MOUNTED ON THE EXTRUDER DISCHARGE. EGAN · 17	🔒 Subscribe
	PCI	78FB	PCI 2 HP CUTTER WITH BLOWER AND CONTROLS MODEL 78FB CUTTER WITH TWO (2) ROTATING BLADES AND ONE (1) STATIONARY BLADE DIRECTLY DRIVEN BY A 2 HP 208-230/460-VOLT 1725 RPM A/C MOTOR. TWO TRIM INLETS. S/N 71992. TRIM CUTTER ON UNITIZED FRAME WITH STERLING MODEL 6UHE BLOWER WITH ALUMINUM IMPELLER AND DIRECT DRIVE 5 HP 3450 RPM MOTOR. S/N 13871 88. INCLUDES INTEGRAL CONTROL PANEL WITH MOTOR STARTERS AND OPERATOR CONTROLS. 460/3/60 INPUT. PCI · 78FB	🔒 Subscribe
			MISC. TOOLING	🔒 Subscribe
2020	UNIVERSAL ROBOTS	UR10E	2020 UNIVERSAL ROBOTS UR10E ROBOT W/ CUSTOM DRAWER-STYLE STAND, EXCELLENT CONDITION ONLY USED FOR PLASTICS (NO COOLANT EXPOSURE). STAND: CUSTOM HEAVY-DUTY VENTION STAND 4, TWO-WAY DRAWERS (HOLDS 8 TUBES PER DRAWER) LEVELING CASTERS COUNTERBALANCED BASE UR CONTROLLABLE PNEUMATIC VALVE BANK PNEUMATIC REGULATOR WITH EMERGENCY SHUT-OFF. GRIPPER: SCHUNK EOA-UR3510-JGP 100-10 GRIPPER INCLUDES EXTRA SOFT-JAW BLANKS 2020 · UNIVERSAL ROBOTS · UR10E	🔒 Subscribe
	DAVIS STANDARD	120MM45CT	DAVIS STANDARD 120MM45CT SINGLE SCREW EXTRUDER, SCREW DIAMETER: 120 MM, L/D RATIO: 30:1, ELECTRICALLY HEATED, WATER COOLED, MOTOR: 200 HP, TEMPERATURE CONTROL PANEL DAVIS STANDARD · 120MM45CT	🔒 Subscribe
2013	AMERICAN KUHNE	AK120MM	2013 AMERICAN KUHNE AK120MM 30:1 REBUILD SINGLE SCREW EXTRUDER - SCREW SIZE: 120 MM - L/D RATIO: 30:1 - MOTOR: 200 HP - DIGITAL CONTROLS - 42 CENTERLINE HEIGHT - ELECTRICALLY HEATED - AIR COOLED BARREL - ELECTRICAL REQUIREMENTS: 480 V 2013 · AMERICAN KUHNE · AK120MM	🔒 Subscribe
2019	HOLLOWAY / PRECISION	225 GALLON	2019 HOLLOWAY / PRECISION 225 GALLON 316L STAINLESS STEEL REACTOR - CAPACITY: 225 GALLON - CONSTRUCTION: 316L STAINLESS STEEL - VESSEL RATING: 35 PSI @ 300F - JACKET RATING: 200 PSI @ 300F - DUAL AGITATION: TURBINE - BOTTOM AGITATION: SWEEP - TEMP PROBE - 12 MANWAY WITH SIGHT GLASS (3) 3.5 CENTER, 12 FOR AGITATOR - OFF CENTER TURBINE - ALL DRIVE WASH DOWN COVERED WITH STAINLESS STEEL - 2 CBO 2019 · HOLLOWAY / PRECISION · 225 GALLON	🔒 Subscribe
2007	MOKON	ICEMAN AC2001H1	2007 MOKON ICEMAN PORTABLE CHILLER AC2001H1 230 VOLT, 3 PHASE PORTABLE CHILLER. 1 HP COMPRESSOR .75 HP MOTOR. MAX TEMP 70 DEGREES F. R-22 REFRIGERANT 2007 · MOKON · ICEMAN AC2001H1	🔒 Subscribe
	SAVAGE BROS	750 CM	SAVAGE BROS 750 CM CHOCOLATE MELTER AND CONDITIONER, 750 LB / 350 KG CAPACITY, ALL STAINLESS STEEL WATER-JACKETED CONSTRUCTION, UNIQUE WATER-JACKETED DRAW-OFF GUILLOTINE VALVE FOR NEVER PLUG PERFORMANCE, INTERNAL PUMP CIRCULATES WATER FOR FAST MELTING AND CONDITIONING, LID-OFF AGITATOR STOP SAFETY FEATURE, NYLON AGITATOR SCRAPERS, FOOTPRINT 41X 33X 52H SAVAGE BROS · 750 CM	🔒 Subscribe
	COMMAND TOOLING	60.3025E365RLELIM-VS	COMMAND TOOLING 60.3025E365RLELIM-VS VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25 COMMAND TOOLING · 60.3025E365RLELIM-VS	🔒 Subscribe
	WTO	410513030-30	WTO 410513030-30 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER WTO · 410513030-30	🔒 Subscribe
	WTO	410516078-30	WTO 410516078-30 VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25 WTO · 410516078-30	🔒 Subscribe
	COMMAND TOOLING	60.3020E365RL/1OT13	COMMAND TOOLING 60.3020E365RL/1OT13 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER COMMAND TOOLING · 60.3020E365RL/1OT13	🔒 Subscribe
	EMCO	436330	EMCO 436330 VDI 30 LEFT HAND BORING BAR HOLDER EMCO · 436330	🔒 Subscribe
	WTO	R4Z580W	WTO R4Z580W VDI 30 FACE GROOVING TOOL HOLDER WTO · R4Z580W	🔒 Subscribe
	EPPINGER	3.200.625	EPPINGER 3.200.625 VDI 30 1:1 RADIAL LIVE TOOL HOLDER ER25 EPPINGER · 3.200.625	🔒 Subscribe
	EMCO	R6Z-460	EMCO R6Z-460 VDI 30 BORING BAR HOLDER EMCO · R6Z-460	🔒 Subscribe
	EMCO	R4Z-230 VDI 30	EMCO R4Z-230 VDI 30 OD INVERTED TOOL HOLDER EMCO · R4Z-230 VDI 30	🔒 Subscribe
	VESTIL	GRAVITY FLOW SHELVING UNIT	VESTIL GRAVITY FLOW SHELVING UNIT VESTIL · GRAVITY FLOW SHELVING UNIT	🔒 Subscribe
	EMCO	R4Z-410 VDI 30	EMCO R4Z-410 VDI 30 OD LEFT HAND TOOL HOLDER EMCO · R4Z-410 VDI 30	🔒 Subscribe
	DESPATCH	RFD2-13-2E	DESPATCH RFD2-13-2E PROGRAMMABLE OVEN DESPATCH · RFD2-13-2E	🔒 Subscribe
2012	DMG MORI	NHX5000	2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXIS: 0.001 ( FULL 4TH ) TABLE SIZE: 19.7 X 19.7 MAX WEIGHT ON TABLE: 1,100 LBS SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 SPINDLE POWER: 30 HP ATC: 60 STATIONS EQUIPPED WITH: M730BM CONTROL 12K RPM SPINDLE 60 STATION AUTOMATIC TOOL CHANGER CHIP CONVEYOR FULL 4TH AXIS COOLANT THROUGH SPINDLE INTERFACE ONLY 2012 · DMG MORI · NHX5000	🔒 Subscribe
2015	EPILOG	FUSION M2 32 DUAL SOURCE	2015 EPILOG FUSION M2 32 DUAL SOURCE LASER, EXCELLENT CONDITION USED PRIMARILY FOR ENGRAVING PLASTICS, FEATURES: 50W CO2 SOURCE 30W FIBER SOURCE 32IN X 20IN WORK AREA 12.5IN MAX PART HEIGHT AIR ASSIST 2 ROTARY ATTACHMENTS (4TH AXIS) ADDITIONAL 5IN LENS (FOR FIBER LASER) 2 DOWNDRAFT VECTOR TABLES (FOR CUTTING) EXHAUST FAN NEW CO2 TUBE INSTALLED IN JAN 2024 2015 · EPILOG · FUSION M2 32 DUAL SOURCE	🔒 Subscribe
2012	DMG MORI	NHX5000	2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXIS: 0.001 ( FULL 4TH ) TABLE SIZE: 19.7 X 19.7 MAX WEIGHT ON TABLE: 1,100 LBS SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 SPINDLE POWER: 30 HP ATC: 60 STATIONS EQUIPPED WITH: M730BM CONTROL 12K RPM SPINDLE 60 STATION AUTOMATIC TOOL CHANGER CHIP CONVEYOR FULL 4TH AXIS COOLANT THROUGH SPINDLE INTERFACE ONLY 2012 · DMG MORI · NHX5000	🔒 Subscribe
2006	HURCO	VM1	2006 HURCO VM1 MACHINING CENTER S/N: H-V11477 2006 · HURCO · VM1	🔒 Subscribe
	MORI SEIKI	M-30022	MORI SEIKI M-30022 MACHINING CENTER S/N: 144 MORI SEIKI · M-30022	🔒 Subscribe
1994	MAZAK	MTV 515/40	1994 MAZAK MTV 515/40 CNC VERTICAL MACHINING CENTER S/N: 111159 1994 · MAZAK · MTV 515/40	🔒 Subscribe
1993	MAZAK	MTV 414/32	1993 MAZAK MTV 414/32 CNC VERTICAL MACHINING CENTER S/N: 109836 1993 · MAZAK · MTV 414/32	🔒 Subscribe
1998	ELGIN		1998 ELGIN S/N: 1645 1998 · ELGIN	🔒 Subscribe
1992	HARDINGE	CONQUEST 42 CS-42	1992 HARDINGE CONQUEST 42 CS-42 CNC LATHE - CNC TURNING CENTER S/N: CS-0008220-02 1992 · HARDINGE · CONQUEST 42 CS-42	🔒 Subscribe
	MITUTOYO	B706	MITUTOYO B706 COORDINATE MEASURING MACHINE, CMM X-AXIS TRAVELS: 27.56 INCH Y-AXIS TRAVELS: 23.62 INCH Z-AXIS TRAVELS: 23.62 INCH ELECTRICAL: 120V, 60 HZ AIR SUPPLY: 70-90 PSI APPROXIMATE TABLE SIZE: 36 INCH X 48 INCH APPROXIMATE MACHINE FOOTPRINT: 5' X 5.5' MITUTOYO · B706	🔒 Subscribe
	TEXWRAP	2410ISS	TEXWRAP 2410ISS AUTOMATIC SIDE SEAL SHRINK WRAPPER WITH HEAT TUNNEL, APPROXIMATELY 5 YEARS OLD. COMPLETE SYSTEM INCLUDES: TWO HYTROL CONVEYORS, INFEED CONVEYOR, TEXWRAP 2410ISS, TEXWRAP 1322 SHRINK TUNNEL, CENTER FOLD ATTACHMENT. INCLUDES 36 ROLLS OF 42" CLYSAR HPG 150GA 3500' FILM AND 30 ROLLS OF 26" CLYSAR HPG 150GA 3500' FILM. THE 2410ISS HAS A CAPACITY OF 24" WIDE AND 10" TALL AND FEATURES PATENTED TEXWRAP VERSA SEAL (TVS) TECHNOLOGY WITH HORIZONTAL AND VERTICAL PHOTOEYE CONTROL, AUTOMATIC AUTOSPACE TUNING, STANDARD AUTO-SPACING CONTROL, AND VARIABLE SPEED CONTROL WITH BELT SPEED OF 100 FEET PER MINUTE. THE TEXWRAP 1322 IS A SINGLE-CHAMBER FORCED AIR CONVECTION TUNNEL WITH DIGITAL TEMPERATURE CONTROLS, HIGH VELOCITY FANS, INDIVIDUAL TOP AND BOTTOM CONTROLS FOR AIR DIRECTION, AND VARIABLE SPEED CONVEYORS. TEXWRAP · 2410ISS	🔒 Subscribe
	ABICOR BINZEL	4	ABICOR BINZEL WELDING GUN #4 ABICOR BINZEL · 4	🔒 Subscribe
	ABICOR BINZEL	5	ABICOR BINZEL WELDING GUN #5 ABICOR BINZEL · 5	🔒 Subscribe
	ABICOR BINZEL	#3	ABICOR BINZEL WELDING GUN #3 ABICOR BINZEL · #3	🔒 Subscribe
	ABICOR BINZEL	#2	ABICOR BINZEL WELDING GUN #2 ABICOR BINZEL · #2	🔒 Subscribe
	ABICOR BINZEL	WELDING GUN #1	ABICOR BINZEL WELDING GUN #1 ABICOR BINZEL · WELDING GUN #1	🔒 Subscribe
	AUTOPAK	20000 SERIES	16 INCH X 60.25 INCH AUTOPAK CONVEYOR BELT, 16 INCH WIDTH, 60.25 INCH LENGTH, LEESON, 115V, .5PH MOTOR, EQUIPPED WITH: MOTOR MASTER 20000 SERIES CONTROL AUTOPAK · 20000 SERIES	🔒 Subscribe
2003	BARRY-WEHMILLER THIELE	RECIPROCATING PLACER	2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE 2003 · BARRY-WEHMILLER THIELE · RECIPROCATING PLACER	🔒 Subscribe
2003	BARRY-WEHMILLER THIELE	RECIPROCATING PLACER	2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE 2003 · BARRY-WEHMILLER THIELE · RECIPROCATING PLACER	🔒 Subscribe
			2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			WELDING TORCH REEL ON 2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			WELDING TANK DOLLY WITH HOSES	🔒 Subscribe
			INDUSTRIAL REFRIGERATOR	🔒 Subscribe
	LINCOLN	IDEALARC TM500/500	LINCOLN IDEALARC MODEL TM500/500 AC/DC ARC WELDER LINCOLN · IDEALARC TM500/500	🔒 Subscribe
	SKAT BLAST	TABLE TOP DRY BLAST CABINET	SKAT BLAST TABLE TOP DRY BLAST CABINET SKAT BLAST · TABLE TOP DRY BLAST CABINET	🔒 Subscribe

Year	Make	Model	Description	Price
	MARVEL	81/9	MARVEL SERIES 81/9 VERTICAL BAND SAW, ELECTRICAL: 460V, 3-PHASE	🔒 Subscribe
2005	DAVI YSTAD	1/4 X 10	2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD - BEND WIDTH: 10 BEND THICKNESS: 1/4 MAX BEND ANGLE: 135 DEGREES BACK GAUGE TABLE SIZE: 10 X 10 STROKE OF UPPER BENDING BEAM: 28 OF TRAVEL ELECTRICAL: 460 V / 3 PH EQUIPPED WITH: MITSUBISHI CONTROLLER, 10 AXIS SYSTEM, CNC CROWNING ON TOP AND BOTTOM, 10 X 10 BACK GAUGE TABLE, FLAT BLANK LOAD AND PARTS UNLOAD SYSTEM, DATA M LASER BEND ANGLE CONTROL	🔒 Subscribe
2023	ARMFIELD	FT102XA	2023 ARMFIELD FT102XA CARBONATOR & FILLER - PILOT-SCALE BEVERAGE CARBONATION & FILLING SYSTEM, CARBONATION CAPACITY UP TO 30 L/HOUR (VARIES BY PRODUCT), CO2 INJECTION CONTROL ELECTRONIC MASS-FLOW CONTROLLER, PRODUCT TEMPERATURE 2 C - 20 C ADJUSTABLE, FILLING TYPE COUNTER-PRESSURE, AUTOMATIC, MATERIALS 304/316 STAINLESS STEEL, UTILITIES 120 V/230 V AC, COMPRESSED AIR (5 BAR), CO2 SUPPLY, DIMENSIONS APPROX. 48 L 28 W 60 H, WEIGHT APPROX. 275 LB (125 KG), CAPPER ENABLING SYSTEM CROWN CAP SEALER SCREW CAP SEALER, FILING HEAD FOR CANS INTEGRAL CAN SEAMER, VACUUM SYSTEM, SYRUP DOSING SYSTEM, PET BOTTLENECK SUPPORT	🔒 Subscribe
	EGAN	17	3.5" 32:1 L/D EGAN EXTRUDER, 150HP, ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), TOP VENTED, PLUGGED BARREL AT APPROXIMATELY 52" CENTER LINE HEIGHT. GEARBOX: REDUCTION RATIO OF 7:1, BELT DRIVEN, 150 HP D/C MOTOR, 312 DIAMETER ROUND ON CENTER FEED THROAT ENTRANCE. BERINGER 4.5 MODEL 17 SCREEN CHANGER. LESS HYDRAULIC CYLINDER MOUNTED ON THE EXTRUDER DISCHARGE.	🔒 Subscribe
	PCI	78FB	PCI 2 HP CUTTER WITH BLOWER AND CONTROLS MODEL 78FB CUTTER WITH TWO (2) ROTATING BLADES AND ONE (1) STATIONARY BLADE DIRECTLY DRIVEN BY A 2 HP 208-230/460-VOLT 1725 RPM A/C MOTOR. TWO TRIM INLETS. S/N 71992. TRIM CUTTER ON UNITIZED FRAME WITH STERLING MODEL 6UHE BLOWER WITH ALUMINUM IMPELLER AND DIRECT DRIVE 5 HP 3450 RPM MOTOR. S/N 13871 88. INCLUDES INTEGRAL CONTROL PANEL WITH MOTOR STARTERS AND OPERATOR CONTROLS. 460/3/60 INPUT.	🔒 Subscribe
			MISC. TOOLING	🔒 Subscribe
2020	UNIVERSAL ROBOTS	UR10E	2020 UNIVERSAL ROBOTS UR10E ROBOT W/ CUSTOM DRAWER-STYLE STAND, EXCELLENT CONDITION ONLY USED FOR PLASTICS (NO COOLANT EXPOSURE). STAND: CUSTOM HEAVY-DUTY VENTION STAND 4, TWO-WAY DRAWERS (HOLDS 8 TUBES PER DRAWER) LEVELING CASTERS COUNTERBALANCED BASE UR CONTROLLABLE PNEUMATIC VALVE BANK PNEUMATIC REGULATOR WITH EMERGENCY SHUT-OFF. GRIPPER: SCHUNK EOA-UR3510-JGP 100-10 GRIPPER INCLUDES EXTRA SOFT-JAW BLANKS	🔒 Subscribe
	DAVIS STANDARD	120MM45CT	DAVIS STANDARD 120MM45CT SINGLE SCREW EXTRUDER, SCREW DIAMETER: 120 MM, L/D RATIO: 30:1, ELECTRICALLY HEATED, WATER COOLED, MOTOR: 200 HP, TEMPERATURE CONTROL PANEL	🔒 Subscribe
2013	AMERICAN KUHNE	AK120MM	2013 AMERICAN KUHNE AK120MM 30:1 REBUILD SINGLE SCREW EXTRUDER - SCREW SIZE: 120 MM - L/D RATIO: 30:1 - MOTOR: 200 HP - DIGITAL CONTROLS - 42 CENTERLINE HEIGHT - ELECTRICALLY HEATED - AIR COOLED BARREL - ELECTRICAL REQUIREMENTS: 480 V	🔒 Subscribe
2019	HOLLOWAY / PRECISION	225 GALLON	2019 HOLLOWAY / PRECISION 225 GALLON 316L STAINLESS STEEL REACTOR - CAPACITY: 225 GALLON - CONSTRUCTION: 316L STAINLESS STEEL - VESSEL RATING: 35 PSI @ 300F - JACKET RATING: 200 PSI @ 300F - DUAL AGITATION: TURBINE - BOTTOM AGITATION: SWEEP - TEMP PROBE - 12 MANWAY WITH SIGHT GLASS (3) 3.5 CENTER, 12 FOR AGITATOR - OFF CENTER TURBINE - ALL DRIVE WASH DOWN COVERED WITH STAINLESS STEEL - 2 CBO	🔒 Subscribe
2007	MOKON	ICEMAN AC2001H1	2007 MOKON ICEMAN PORTABLE CHILLER AC2001H1 230 VOLT, 3 PHASE PORTABLE CHILLER. 1 HP COMPRESSOR .75 HP MOTOR. MAX TEMP 70 DEGREES F. R-22 REFRIGERANT	🔒 Subscribe
	SAVAGE BROS	750 CM	SAVAGE BROS 750 CM CHOCOLATE MELTER AND CONDITIONER, 750 LB / 350 KG CAPACITY, ALL STAINLESS STEEL WATER-JACKETED CONSTRUCTION, UNIQUE WATER-JACKETED DRAW-OFF GUILLOTINE VALVE FOR NEVER PLUG PERFORMANCE, INTERNAL PUMP CIRCULATES WATER FOR FAST MELTING AND CONDITIONING, LID-OFF AGITATOR STOP SAFETY FEATURE, NYLON AGITATOR SCRAPERS, FOOTPRINT 41X 33X 52H	🔒 Subscribe
	COMMAND TOOLING	60.3025E365RLELIM-VS	COMMAND TOOLING 60.3025E365RLELIM-VS VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25	🔒 Subscribe
	WTO	410513030-30	WTO 410513030-30 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER	🔒 Subscribe
	WTO	410516078-30	WTO 410516078-30 VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25	🔒 Subscribe
	COMMAND TOOLING	60.3020E365RL/1OT13	COMMAND TOOLING 60.3020E365RL/1OT13 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER	🔒 Subscribe
	EMCO	436330	EMCO 436330 VDI 30 LEFT HAND BORING BAR HOLDER	🔒 Subscribe
	WTO	R4Z580W	WTO R4Z580W VDI 30 FACE GROOVING TOOL HOLDER	🔒 Subscribe
	EPPINGER	3.200.625	EPPINGER 3.200.625 VDI 30 1:1 RADIAL LIVE TOOL HOLDER ER25	🔒 Subscribe
	EMCO	R6Z-460	EMCO R6Z-460 VDI 30 BORING BAR HOLDER	🔒 Subscribe
	EMCO	R4Z-230 VDI 30	EMCO R4Z-230 VDI 30 OD INVERTED TOOL HOLDER	🔒 Subscribe
	VESTIL	GRAVITY FLOW SHELVING UNIT	VESTIL GRAVITY FLOW SHELVING UNIT	🔒 Subscribe
	EMCO	R4Z-410 VDI 30	EMCO R4Z-410 VDI 30 OD LEFT HAND TOOL HOLDER	🔒 Subscribe
	DESPATCH	RFD2-13-2E	DESPATCH RFD2-13-2E PROGRAMMABLE OVEN	🔒 Subscribe
2012	DMG MORI	NHX5000	2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXIS: 0.001 ( FULL 4TH ) TABLE SIZE: 19.7 X 19.7 MAX WEIGHT ON TABLE: 1,100 LBS SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 SPINDLE POWER: 30 HP ATC: 60 STATIONS EQUIPPED WITH: M730BM CONTROL 12K RPM SPINDLE 60 STATION AUTOMATIC TOOL CHANGER CHIP CONVEYOR FULL 4TH AXIS COOLANT THROUGH SPINDLE INTERFACE ONLY	🔒 Subscribe
2015	EPILOG	FUSION M2 32 DUAL SOURCE	2015 EPILOG FUSION M2 32 DUAL SOURCE LASER, EXCELLENT CONDITION USED PRIMARILY FOR ENGRAVING PLASTICS, FEATURES: 50W CO2 SOURCE 30W FIBER SOURCE 32IN X 20IN WORK AREA 12.5IN MAX PART HEIGHT AIR ASSIST 2 ROTARY ATTACHMENTS (4TH AXIS) ADDITIONAL 5IN LENS (FOR FIBER LASER) 2 DOWNDRAFT VECTOR TABLES (FOR CUTTING) EXHAUST FAN NEW CO2 TUBE INSTALLED IN JAN 2024	🔒 Subscribe
2012	DMG MORI	NHX5000	2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXIS: 0.001 ( FULL 4TH ) TABLE SIZE: 19.7 X 19.7 MAX WEIGHT ON TABLE: 1,100 LBS SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 SPINDLE POWER: 30 HP ATC: 60 STATIONS EQUIPPED WITH: M730BM CONTROL 12K RPM SPINDLE 60 STATION AUTOMATIC TOOL CHANGER CHIP CONVEYOR FULL 4TH AXIS COOLANT THROUGH SPINDLE INTERFACE ONLY	🔒 Subscribe
2006	HURCO	VM1	2006 HURCO VM1 MACHINING CENTER S/N: H-V11477	🔒 Subscribe
	MORI SEIKI	M-30022	MORI SEIKI M-30022 MACHINING CENTER S/N: 144	🔒 Subscribe
1994	MAZAK	MTV 515/40	1994 MAZAK MTV 515/40 CNC VERTICAL MACHINING CENTER S/N: 111159	🔒 Subscribe
1993	MAZAK	MTV 414/32	1993 MAZAK MTV 414/32 CNC VERTICAL MACHINING CENTER S/N: 109836	🔒 Subscribe
1998	ELGIN		1998 ELGIN S/N: 1645	🔒 Subscribe
1992	HARDINGE	CONQUEST 42 CS-42	1992 HARDINGE CONQUEST 42 CS-42 CNC LATHE - CNC TURNING CENTER S/N: CS-0008220-02	🔒 Subscribe
	MITUTOYO	B706	MITUTOYO B706 COORDINATE MEASURING MACHINE, CMM X-AXIS TRAVELS: 27.56 INCH Y-AXIS TRAVELS: 23.62 INCH Z-AXIS TRAVELS: 23.62 INCH ELECTRICAL: 120V, 60 HZ AIR SUPPLY: 70-90 PSI APPROXIMATE TABLE SIZE: 36 INCH X 48 INCH APPROXIMATE MACHINE FOOTPRINT: 5' X 5.5'	🔒 Subscribe
	TEXWRAP	2410ISS	TEXWRAP 2410ISS AUTOMATIC SIDE SEAL SHRINK WRAPPER WITH HEAT TUNNEL, APPROXIMATELY 5 YEARS OLD. COMPLETE SYSTEM INCLUDES: TWO HYTROL CONVEYORS, INFEED CONVEYOR, TEXWRAP 2410ISS, TEXWRAP 1322 SHRINK TUNNEL, CENTER FOLD ATTACHMENT. INCLUDES 36 ROLLS OF 42" CLYSAR HPG 150GA 3500' FILM AND 30 ROLLS OF 26" CLYSAR HPG 150GA 3500' FILM. THE 2410ISS HAS A CAPACITY OF 24" WIDE AND 10" TALL AND FEATURES PATENTED TEXWRAP VERSA SEAL (TVS) TECHNOLOGY WITH HORIZONTAL AND VERTICAL PHOTOEYE CONTROL, AUTOMATIC AUTOSPACE TUNING, STANDARD AUTO-SPACING CONTROL, AND VARIABLE SPEED CONTROL WITH BELT SPEED OF 100 FEET PER MINUTE. THE TEXWRAP 1322 IS A SINGLE-CHAMBER FORCED AIR CONVECTION TUNNEL WITH DIGITAL TEMPERATURE CONTROLS, HIGH VELOCITY FANS, INDIVIDUAL TOP AND BOTTOM CONTROLS FOR AIR DIRECTION, AND VARIABLE SPEED CONVEYORS.	🔒 Subscribe
	ABICOR BINZEL	4	ABICOR BINZEL WELDING GUN #4	🔒 Subscribe
	ABICOR BINZEL	5	ABICOR BINZEL WELDING GUN #5	🔒 Subscribe
	ABICOR BINZEL	#3	ABICOR BINZEL WELDING GUN #3	🔒 Subscribe
	ABICOR BINZEL	#2	ABICOR BINZEL WELDING GUN #2	🔒 Subscribe
	ABICOR BINZEL	WELDING GUN #1	ABICOR BINZEL WELDING GUN #1	🔒 Subscribe
	AUTOPAK	20000 SERIES	16 INCH X 60.25 INCH AUTOPAK CONVEYOR BELT, 16 INCH WIDTH, 60.25 INCH LENGTH, LEESON, 115V, .5PH MOTOR, EQUIPPED WITH: MOTOR MASTER 20000 SERIES CONTROL	🔒 Subscribe
2003	BARRY-WEHMILLER THIELE	RECIPROCATING PLACER	2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE	🔒 Subscribe
2003	BARRY-WEHMILLER THIELE	RECIPROCATING PLACER	2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE	🔒 Subscribe
			2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			WELDING TORCH REEL ON 2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			2 CYLINDER WELDING FIREWALL	🔒 Subscribe
			WELDING TANK DOLLY WITH HOSES	🔒 Subscribe
			INDUSTRIAL REFRIGERATOR	🔒 Subscribe
	LINCOLN	IDEALARC TM500/500	LINCOLN IDEALARC MODEL TM500/500 AC/DC ARC WELDER	🔒 Subscribe
	SKAT BLAST	TABLE TOP DRY BLAST CABINET	SKAT BLAST TABLE TOP DRY BLAST CABINET	🔒 Subscribe

MARVEL 81/9

MARVEL SERIES 81/9 VERTICAL BAND SAW, ELECTRICAL: 460V, 3-PHASE...

2005 DAVI YSTAD 1/4 X 10

2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD - BEND WIDTH: 10 BEND...

2023 ARMFIELD FT102XA

2023 ARMFIELD FT102XA CARBONATOR & FILLER - PILOT-SCALE BEVERAGE CARBONATION & FILLING SYSTEM, CARBO...

EGAN 17

3.5" 32:1 L/D EGAN EXTRUDER, 150HP, ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), TOP VENTED, PLU...

PCI 78FB

PCI 2 HP CUTTER WITH BLOWER AND CONTROLS MODEL 78FB CUTTER WITH TWO (2) ROTATING BLADES AND ONE (1) ...

MISC. TOOLING

2020 UNIVERSAL ROBOTS UR10E

2020 UNIVERSAL ROBOTS UR10E ROBOT W/ CUSTOM DRAWER-STYLE STAND, EXCELLENT CONDITION ONLY USED FOR PL...

DAVIS STANDARD 120MM45CT

DAVIS STANDARD 120MM45CT SINGLE SCREW EXTRUDER, SCREW DIAMETER: 120 MM, L/D RATIO: 30:1, ELECTRICALL...

2013 AMERICAN KUHNE AK120MM

2013 AMERICAN KUHNE AK120MM 30:1 REBUILD SINGLE SCREW EXTRUDER - SCREW SIZE: 120 MM - L/D RATIO: 30:...

2019 HOLLOWAY / PRECISION 225 GALLON

2019 HOLLOWAY / PRECISION 225 GALLON 316L STAINLESS STEEL REACTOR - CAPACITY: 225 GALLON - CONSTRUCT...

2007 MOKON ICEMAN AC2001H1

2007 MOKON ICEMAN PORTABLE CHILLER AC2001H1 230 VOLT, 3 PHASE PORTABLE CHILLER. 1 HP COMPRESSOR .75 ...

SAVAGE BROS 750 CM

SAVAGE BROS 750 CM CHOCOLATE MELTER AND CONDITIONER, 750 LB / 350 KG CAPACITY, ALL STAINLESS STEEL W...

COMMAND TOOLING 60.3025E365RLELIM-VS

COMMAND TOOLING 60.3025E365RLELIM-VS VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25...

WTO 410513030-30

WTO 410513030-30 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER...

WTO 410516078-30

WTO 410516078-30 VDI 30 1:1 RIGHT ANGLE LIVE TOOL HOLDER ER25...

COMMAND TOOLING 60.3020E365RL/1OT13

COMMAND TOOLING 60.3020E365RL/1OT13 VDI 30 1:2 (SPEEDER) RIGHT ANGLE LIVE TOOL HOLDER...

EMCO 436330

EMCO 436330 VDI 30 LEFT HAND BORING BAR HOLDER...

WTO R4Z580W

WTO R4Z580W VDI 30 FACE GROOVING TOOL HOLDER...

EPPINGER 3.200.625

EPPINGER 3.200.625 VDI 30 1:1 RADIAL LIVE TOOL HOLDER ER25...

EMCO R6Z-460

EMCO R6Z-460 VDI 30 BORING BAR HOLDER...

EMCO R4Z-230 VDI 30

EMCO R4Z-230 VDI 30 OD INVERTED TOOL HOLDER...

VESTIL GRAVITY FLOW SHELVING UNIT

VESTIL GRAVITY FLOW SHELVING UNIT...

EMCO R4Z-410 VDI 30

EMCO R4Z-410 VDI 30 OD LEFT HAND TOOL HOLDER...

DESPATCH RFD2-13-2E

DESPATCH RFD2-13-2E PROGRAMMABLE OVEN...

2012 DMG MORI NHX5000

2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXI...

2015 EPILOG FUSION M2 32 DUAL SOURCE

2015 EPILOG FUSION M2 32 DUAL SOURCE LASER, EXCELLENT CONDITION USED PRIMARILY FOR ENGRAVING PLASTIC...

2012 DMG MORI NHX5000

2012 DMG MORI NHX5000 500MM HORIZONTAL MACHINING CENTER X AXIS: 28.7 Y AXIS: 28.7 Z AXIS: 34.5 B AXI...

2006 HURCO VM1

2006 HURCO VM1 MACHINING CENTER S/N: H-V11477...

MORI SEIKI M-30022

MORI SEIKI M-30022 MACHINING CENTER S/N: 144...

1994 MAZAK MTV 515/40

1994 MAZAK MTV 515/40 CNC VERTICAL MACHINING CENTER S/N: 111159...

1993 MAZAK MTV 414/32

1993 MAZAK MTV 414/32 CNC VERTICAL MACHINING CENTER S/N: 109836...

1998 ELGIN

1998 ELGIN S/N: 1645...

1992 HARDINGE CONQUEST 42 CS-42

1992 HARDINGE CONQUEST 42 CS-42 CNC LATHE - CNC TURNING CENTER S/N: CS-0008220-02...

MITUTOYO B706

MITUTOYO B706 COORDINATE MEASURING MACHINE, CMM X-AXIS TRAVELS: 27.56 INCH Y-AXIS TRAVELS: 23.62 INC...

TEXWRAP 2410ISS

TEXWRAP 2410ISS AUTOMATIC SIDE SEAL SHRINK WRAPPER WITH HEAT TUNNEL, APPROXIMATELY 5 YEARS OLD. COMP...

ABICOR BINZEL 4

ABICOR BINZEL WELDING GUN #4...

ABICOR BINZEL 5

ABICOR BINZEL WELDING GUN #5...

ABICOR BINZEL #3

ABICOR BINZEL WELDING GUN #3...

ABICOR BINZEL #2

ABICOR BINZEL WELDING GUN #2...

ABICOR BINZEL WELDING GUN #1

ABICOR BINZEL WELDING GUN #1...

AUTOPAK 20000 SERIES

16 INCH X 60.25 INCH AUTOPAK CONVEYOR BELT, 16 INCH WIDTH, 60.25 INCH LENGTH, LEESON, 115V, .5PH MOT...

2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER

2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE...

2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER

2003 BARRY-WEHMILLER THIELE RECIPROCATING PLACER DUAL LANE DE-NESTER PNEUMATIC PICK AND PLACE...

2 CYLINDER WELDING FIREWALL

WELDING TORCH REEL ON 2 CYLINDER WELDING FIREWALL

2 CYLINDER WELDING FIREWALL

WELDING TANK DOLLY WITH HOSES

INDUSTRIAL REFRIGERATOR

LINCOLN IDEALARC TM500/500

LINCOLN IDEALARC MODEL TM500/500 AC/DC ARC WELDER...

SKAT BLAST TABLE TOP DRY BLAST CABINET

SKAT BLAST TABLE TOP DRY BLAST CABINET...

<< Previous 1 2 3 4 Next >>

Recent Searches

Login

Reset Password

CNC and Fabrication Machinery Surplus in Multiple Locations

Save to Project Folder

Print Options

Unlock Unlimited Printing