Snack Food Processing and Packaging Equipment Auction

FAIRBANKS MODEL PLF-HR3400-B1 1000 LB FLOOR SCALE WITH GSE 665 DIGITAL CONTROL. CAPACITY: 1000 LBS. SCALE DIMENSIONS: 36 INCHES LENGTH, 36 INCHES WIDTH. GSE 665 DIGITAL CONTROL. STEEL LOADING RAMP. ALLOY STEEL CONSTRUCTION. ELECTRICAL REQUIREMENTS: 90-250 VOLTS, 50/60 HERTZ, 1 PHASE.

24 INCH W Z STYLE STAINLESS STEEL INCLINE CLEATED BUCKET CONVEYOR W/ 136 INCH DISCHARGE. MOUNTED ON ADJUSTABLE LEGS. BELT DIMENSIONS: BELT WIDTH: 24 INCHES. CLEATS: 3 INCHES. 6 INCH PITCH. 4 FT RUN INTO 9FT HIGH ONTO 3 FT RUN DISCHARGE HEIGHT: 136 INCHES. INFEED HEIGHT: 28 INCHES.

STAINLESS STEEL FOOD PROCESSOR - USED FOOD PROCESSOR WITH: OVERALL DIMENSIONS (INCHES): LENGTH: 48 WIDTH: 48 HEIGHT: 56

SPINNING GRILLERS SG-PITA30 PITA OVEN - THE SPINNING GRILLERS SG-PITA30 PITA OVEN ENSURES PERFECTLY BAKED PITA BREAD WITH EFFICIENT, CONSISTENT HEAT DISTRIBUTION AND A ROBUST DESIGN FOR HIGH-OUTPUT KITCHENS. USED SPINNING GRILLERS PITA OVEN WITH: PRODUCTIVITY (APPLICATION DEPENDENT): 6 INCH PITA: UP TO 600/HOUR 8 INCH PITA: UP TO 360/HOUR TURNTABLE DIAMETER: 30 INCHES SPEED RANGE (ADJUSTABLE) MINIMUM: 1 TPM MAXIMUM: 4 TPM OVERALL DIMENSIONS INCLUDING LEGS (INCHES): LENGTH: 37.3 WIDTH: 39.3 HEIGHT: 51 GAS HOOKUP: 0.75 INCH BURNER: SINGLE U-SHAPE, BOTTOM MOUNTED REMOVABLE LEGS FOR COUNTERTOP USE CONSTRUCTION: 304 STAINLESS STEEL INPUT RATE: 70,000 BTU MODEL: SG-PITA30

MERITCH AUTOMATED HAND WASHING SYSTEM WITH: OVERALL DIMENSIONS: LENGTH: 19 INCHES WIDTH: 20 INCHES HEIGHT: 49 INCHES

LOT OF HOIST CHAINS

MERITCH AUTOMATED HAND WASHING SYSTEM WITH: OVERALL DIMENSIONS: LENGTH: 19 INCHES WIDTH: 20 INCHES HEIGHT: 49 INCHES

SF-600 PEDAL OPERATED IMPULSE HEAT SEALER - USED IMPULSE BAG SEALER WITH: SEAL SIZE: LENGTH: 24 INCH WIDTH: 0.125 INCH THICKNESS: 0.01 INCH SEAL TIMER SETTINGS FOOT PEDAL OPERATED APPROXIMATE OVERALL DIMENSIONS: WIDTH: 28.75 INCH DEPTH: 21.625 INCH HEIGHT: 32.25 INCH MOTOR: 1 HORSEPOWER ELECTRICAL: 60 HZ, 110 VOLTS MACHINE WEIGHT: APPROXIMATELY 26 POUNDS MODEL: UNKNOWN

24" W Z STYLE STAINLESS STEEL INCLINE CLEATED BUCKET CONVEYOR W/ 136" DISCHARGE. MOUNTED ON ADJUSTABLE LEGS. BELT DIMENSIONS: BELT WIDTH: 24 INCHES, CLEATS: 3 INCHES, 6 INCH PITCH. 4 FT RUN INTO 9FT HIGH ONTO 3 FT RUN. DISCHARGE HEIGHT: 136 INCHES. INFEED HEIGHT: 28 INCHES.

104"L X 44"W KEY VIBRATORY STAINLESS STEEL CONVEYOR WITH: MODEL: 404-344 CONVEYOR DIMENSIONS: LENGTH: 104 INCHES WIDTH: 44 INCHES DISCHARGE HEIGHT: 34 INCHES S/N: 86-67586

10' L X 16"W KEY ISO-FLO VIBRATORY FEEDER WITH DUAL LANES. DUAL LANE LANE WIDTH: 16 INCHES LANE LENGTH: 10 FEET DISCHARGE HEIGHT: 36 INCHES

SOMATT 3 FT L X 8 INCH W INCLINE GRINDER W/ 3 HP MOTOR. DISCHARGE 8 INCHES WIDE 40 INCHES HIGH. MOTOR SIZE: 3 HP. USED TO GRIND FOOD WASTE. SIMPLE LOADING.

2007 ULINE H-1785 PALLET JACK S/N: 941720

ALLEN S/S 80 INCH L X 10 INCH W VIBRATORY FEED CONVEYOR WITH MODEL: 70169-2 SERIAL: CON20063 CONVEYOR DIMENSIONS: LENGTH: 80 INCHES WIDTH: 10 INCHES GUARDING DEPTH: 4 INCHES S/N: CON20063

24" W Z STYLE STAINLESS STEEL INCLINE CLEATED BUCKET CONVEYOR W/ 136" DISCHARGE. MOUNTED ON ADJUSTABLE LEGS. BELT DIMENSIONS: WIDTH: 24 INCHES, CLEATS: 3 INCHES, 6 INCH PITCH. 4 FT RUN INTO 9 FT HIGH ONTO 3 FT RUN. DISCHARGE HEIGHT: 136 INCHES. INFEED HEIGHT: 28 INCHES.

24 INCH W Z STYLE STAINLESS STEEL INCLINE CLEATED BUCKET CONVEYOR W/ 136 INCH DISCHARGE. MOUNTED ON ADJUSTABLE LEGS. BELT DIMENSIONS: BELT WIDTH: 24 INCHES. CLEATS: 3 INCHES. 6 INCH PITCH. 4 FT RUN INTO 9FT HIGH ONTO 3 FT RUN DISCHARGE HEIGHT: 136 INCHES. INFEED HEIGHT: 28 INCHES.

24" W Z STYLE STAINLESS STEEL INCLINE CLEATED BUCKET CONVEYOR W/ 136" DISCHARGE. MOUNTED ON ADJUSTABLE LEGS. BELT DIMENSIONS: BELT WIDTH: 24 INCHES, CLEATS: 3 INCHES, 6 INCH PITCH. 4 FT RUN INTO 9FT HIGH ONTO 3 FT RUN. DISCHARGE HEIGHT: 136 INCHES. INFEED HEIGHT: 28 INCHES.

148"L X 10" W DIAMETER STAINLESS STEEL SUSPENDED INCLINE SCREW CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 148 INCHES DIAMETER: 10 INCHES PITCH: 5 INCHES PRODUCT HOPPER: LENGTH: 2 FT WIDTH: 2 FT HEIGHT: 2 FT ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ

PARTS STORAGE SHELF WITH CONTENTS INCLUDING: ALLEN BRADLEY POWER SUPPLIES DRIVE COMPONENTS CONVEYOR ROLLERS SPROCKETS AND PULLEYS

1 BAY OF TEARDROP PALLET RACKING WITH: (2) UPRIGHTS (2) 120 INCHES 4 BEAMS: LENGTH 99 INCHES 4 PIECES OF DECK OVERALL DIMENSIONS: LENGTH: 102 INCHES WIDTH: 43 INCHES HEIGHT: 120 INCHES

INDUSTRIAL DOCK DESK WITH: ON WHEELS OVERALL DIMENSIONS: LENGTH: 25 INCHES WIDTH: 24 INCHES HEIGHT: 52 INCHES

INDUSTRIAL DOCK DESK WITH: ON WHEELS OVERALL DIMENSIONS: LENGTH: 25 INCHES WIDTH: 24 INCHES HEIGHT: 52 INCHES

PARTS STORAGE SHELF WITH CONTENTS INCLUDING: DAYTON AND STENNER PUMPS MIXED BEARINGS, COLLARS, AND SPROCKETS

8 CU. FT STAINLESS STEEL LIQUID STORAGE BIN W/ CENTRIFUGAL PUMP. TANK DIMENSIONS: LENGTH: 40 INCHES WIDTH: 24 INCHES DEPTH: 16 INCHES 5 INCH FLANGED OUTLET 6 INCH FLANGED INLET

CART - CART WITH: ON WHEELS OVERALL DIMENSIONS: LENGTH: 76 INCHES WIDTH: 19 INCHES HEIGHT: 58 INCHES

2011 SHOP FOX W1712 GRINDING WHEEL. OVERALL DIMENSIONS: LENGTH: 22 INCHES WIDTH: 40 INCHES HEIGHT: 56 INCHES. ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE. S/N: TC19897

102" L X 48" W STAINLESS STEEL WELDING TABLE WITH: OVERALL DIMENSIONS: LENGTH: 102 INCHES WIDTH: 48 INCHES HEIGHT: 43 INCHES

METTLER TOLEDO METAL DETECTOR HEAD ONLY 18 INCH WIDE X 11 INCH TALL - THE METTLER TOLEDO METAL DETECTOR HEAD ONLY (18 INCH WIDE X 11 INCH TALL) IS A PRECISION INSPECTION DEVICE DESIGNED TO DETECT FERROUS, NON-FERROUS, AND STAINLESS STEEL CONTAMINANTS IN A WIDE RANGE OF PRODUCTS. ITS COMPACT HEAD DESIGN ALLOWS FOR EASY INTEGRATION INTO EXISTING PRODUCTION LINES, ENSURING CONTINUOUS PRODUCT SAFETY WITHOUT SLOWING DOWN OPERATIONS. BUILT FOR HIGH SENSITIVITY AND RELIABILITY, IT SUPPORTS CONSISTENT QUALITY CONTROL IN FOOD, PHARMACEUTICAL, AND PACKAGING APPLICATIONS. DURABLE CONSTRUCTION AND USER-FRIENDLY SETUP MAKE IT IDEAL FOR HIGH-VOLUME PRODUCTION ENVIRONMENTS. WORKING APERTURE: 18 INCHES WIDE X 11 INCHES TALL NO CONVEYOR INCLUDED NO REJECT INCLUDED

MERITCH AUTOMATED HAND WASHING SYSTEM WITH: OVERALL DIMENSIONS: LENGTH: 19 INCHES WIDTH: 20 INCHES HEIGHT: 49 INCHES

WILDEN AIR-OPERATED DOUBLE DIAPHRAGM PUMP WITH: OVERALL DIMENSIONS: LENGTH: 35 INCHES WIDTH: 35 INCHES HEIGHT: 44 INCHES

VANMARK CLEATED INCLINE CONVEYOR WITH: CLEATS: 2.5" FLIGHT, 12" CENTER 1.5" HP STARTER CONVEYOR DIMENSIONS: LENGTH: 166 INCHES WIDTH: 24 INCHES DISCHARGE HEIGHT: 84 INCHES OVERALL DIMENSIONS: LENGTH: 166 INCHES WIDTH: 32 INCHES HEIGHT: 84 INCHES

BRIDGEPORT VERTICAL MILL MACHINE WITH: SERIAL: 2570024 1 HP OVERALL DIMENSIONS: LENGTH: 60 INCHES WIDTH: 68 INCHES HEIGHT: 80 INCHES ELECTRICAL REQUIREMENTS: 280 VOLTS

DAYTON MODEL: 2LKT2B BENCH GRINDER WITH: 1 HP OVERALL DIMENSIONS: LENGTH: 20 INCHES WIDTH: 24 INCHES HEIGHT: 50 INCHES S/N: 122100051

CABINET WITH: OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH: 36 INCHES HEIGHT: 90 INCHES

VANMARK 298" L X 24" W CLEATED INCLINE CONVEYOR. BELT DIMENSIONS: LENGTH: 298 INCHES WIDTH: 24 INCHES. 6 INCH HIGH GUARDING. CLEAT HEIGHT: 1.5 INCHES. OVERALL DIMENSIONS: LENGTH: 298 INCHES WIDTH: 38 INCHES HEIGHT: 202 INCHES. INFEED HEIGHT: 80 INCHES. DISCHARGE HEIGHT: 190 INCHES. ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 50/60 HERTZ, 3 PHASE.

50' L X 24" W FLAT BELT PRODUCT TRANSFER CONVEYOR WITH 3" H CLEATS - 50' L X 24" W FLAT BELT PRODUCT TRANSFER CONVEYOR WITH 3" H CLEATS WITH: DISCHARGE HEIGHT: 72 INCHES MOTOR SIZE: .75 HP BELT DIMENSIONS: OVERALL LENGTH: 50 FEET 44 FEET LONG INTO 5 FT INCLINE AND 1 FT LONG DISCHARGE WIDTH: 24 INCHES CLEATS: 3 INCH HEIGHT, 12 INCH PITCH

VIKING AL495 INTERNAL GEAR PUMP WITH BALDOR 2 HP MOTOR. 5 INCH FLANGE INLET AND OUTLET. OVERALL DIMENSIONS: LENGTH: 31 INCHES WIDTH: 13 INCHES HEIGHT: 13 INCHES.

BARTELT RPM-100 ROTARY HORIZONTAL FORM FILL AND SEAL - USED BARTELT FORM FILL AND SEAL WITH: SPEED: UP TO 100 POUCHES PER MINUTE DEPENDING ON APPLICATION POUCH SIZE RANGE (MINIMUM): LENGTH: 2 INCHES WIDTH: 2 INCHES POUCH SIZE RANGE ( MAXIMUM): LENGTH: 7.25 INCHES WIDTH: 10 INCHES MAXIMUM ROLL DIMENSIONS: DIAMETER: 24 INCHES WIDTH: 21 INCHES ELECTRICAL REQUIREMENTS: 460 VOLTS/ 3 PHASE

BOSCH THERMOFORMER - BOSCH ROLLSTOCK THERMOFORMER LAST USED FOR TABLETS AND CAPLETS PAINTED MILD STEEL FRAME

PHOENIX PRTL 2150A SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER. PRODUCTION: UP TO 40 PALLETS PER HOUR. MAXIMUM WRAP SPEED: 14 RPM. MAXIMUM LOAD DIMENSIONS (INCHES): LENGTH: 56 WIDTH: 56 HEIGHT: 80. OVERALL DIMENSIONS (INCHES): LENGTH: 90 WIDTH: 50 HEIGHT: 170. STANDARD FILM WIDTH: 20 INCHES. ROLL DIAMETER: 10 INCHES. INNER CORE DIAMETER: 3 INCHES. STANDARD PRE-STRETCH: 245%. ROTATIONAL DIAMETER: 129 INCHES. CONTROLLER (UPGRADED): ALLEN-BRADLEY PLC. WELDED STEEL FRAME. POWER: 120 VAC / 60 HZ / 15 A / SINGLE PHASE.

1999 SHANKLIN A-27A HOT KNIFE AUTOMATIC L-BAR SEALER WITH: OUTPUT: UP TO 35 PACKAGES PER MINUTE DEPENDING ON PRODUCT AND APPLICATION MAXIMUM PRODUCT HEIGHT: 8 INCHES SEAL AREA: LENGTH: 40 INCHES WIDTH: 20 INCHES SEAL BAR: LENGTH: 32 INCHES WIDTH: 20 INCHES MAXIMUM FILM WIDTH: 30 INCHES HOT KNIFE SEAL JAW DISCHARGE HEIGHT: 29 INCHES INFEED CONVEYOR DIMENSIONS: WIDTH: 18 INCHES LENGTH: 68 INCHES HEIGHT: 29 INCHES PAINTED STEEL CONSTRUCTION ELECTRICS: 1 PHASE, 60 HZ, 230 VOLTS, 20 AMPS S/N: A-27A

BPI LW250SC DUAL 5 LITER STAINLESS STEEL LINEAR BUCKET SCALE - USED BPI BUCKET SCALE WITH: PRODUCTION SPEED: UP TO 15 PACKAGES PER MINUTE DEPENDING ON PRODUCT AND APPLICATION SCALE WEIGHMENT RANGE: MINIMUM: 100 GRAMS MAXIMUM: 3,000 GRAMS ACCURACY: 0.5 - 5 GRAMS NUMBER OF BUCKETS: 2 BUCKET VOLUME: 5 LITERS 304 STAINLESS STEEL OVERALL DIMENSIONS (APPROXIMATE): LENGTH: 47 INCHES WIDTH: 37.75 INCHES HEIGHT: 49 INCHES WEIGHT: APPROXIMATELY 375 POUNDS ELECTRICAL REQUIREMENTS: 1 PHASE, 50/60 HZ, 200/220/230/240 VOLTS PREVIOUSLY USED IN SNACK NUT PACKAGING APPLICATION MODEL: LW250SC

LANTECH S300 SEMI AUTOMATIC ROTARY ARM STRETCH WRAPPER. FEATURES A ROTATING ARM THAT ALLOWS PALLETS TO REMAIN STATIONARY WHILE THE STRETCH FILM IS APPLIED, ENSURING CONSISTENT AND PRECISE WRAPPING. USER-FRIENDLY INTERFACE ENABLES QUICK SETUP AND OPERATION, WHILE THE ROBUST CONSTRUCTION ENSURES RELIABLE PERFORMANCE FOR MEDIUM TO HIGH-VOLUME APPLICATIONS. WITH ADJUSTABLE TENSION CONTROLS AND OPTIONAL FEATURES LIKE A TURNTABLE, THE S300 ENHANCES PRODUCTIVITY AND HELPS OPTIMIZE MATERIAL USAGE. OUTPUT: UP TO 35 LOADS PER HOUR, PRODUCT DEPENDENT. MAXIMUM LOAD DIAGONAL: 76 INCHES. MAXIMUM LOAD HEIGHT: 80 INCHES. POWER ROLLER STRETCH SYSTEM: 200%. FILM CAPACITY: ROLL DIAMETER: 10 INCHES. FILM WEB WIDTH: 20 INCHES. UNLIMITED WEIGHT. OVERALL DIMENSIONS (APPROXIMATE): WIDTH: 157 INCHES. LENGTH: 172 INCHES. HEIGHT: 121 INCHES. ELECTRICAL REQUIREMENTS: 1 PHASE, 50/60 HERTZ, 120 VOLTS.

LANTECH S-300 SEMI AUTOMATIC ROTARY ARM STRETCH WRAPPER - USED LANTECH S300 ROTARY ARM STRETCHWRAPPER WITH: THE LANTECH S300 SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER IS DESIGNED FOR EFFICIENT AND FLEXIBLE PALLET WRAPPING IN A VARIETY OF INDUSTRIES. IT FEATURES A ROTATING ARM THAT ALLOWS PALLETS TO REMAIN STATIONARY WHILE THE STRETCH FILM IS APPLIED, ENSURING CONSISTENT AND PRECISE WRAPPING. THE USER-FRIENDLY INTERFACE ENABLES QUICK SETUP AND OPERATION, WHILE THE ROBUST CONSTRUCTION ENSURES RELIABLE PERFORMANCE FOR MEDIUM TO HIGH-VOLUME APPLICATIONS. WITH ADJUSTABLE TENSION CONTROLS AND OPTIONAL FEATURES LIKE A TURNTABLE, THE S300 ENHANCES PRODUCTIVITY AND HELPS OPTIMIZE MATERIAL USAGE. OUTPUT: UP TO 35 LOADS PER HOUR MAXIMUM LOAD DIAGONAL: 76 INCHES MAXIMUM LOAD HEIGHT: 80 INCHES POWER ROLLER STRETCH SYSTEM: 200% ROLL DIAMETER: 10 INCHES FILM WEB WIDTH: 20 INCHES UNLIMITED WEIGHT ELECTRICAL REQUIREMENTS: 120 VOLTS / 1 PHASE / 50/60 HERTZ MODEL: S-300

EXCEL PACKAGING SYSTEMS C SERIES C-250 1 UP HORIZONTAL FLOW WRAPPER. OUTPUT: UP TO 100 PACKAGES PER MINUTE DEPENDING ON PACKAGE SIZE. MINIMUM PRODUCT DIMENSIONS: 2 INCHES LONG X 1 INCH WIDE. MAXIMUM PRODUCT DIMENSIONS: 24 INCHES LONG X 8 INCHES WIDE. SEAL JAW WIDTH: 4.5 INCHES. INFEED LENGTH: 6.5 FEET LONG. 7 INCH OMRON CONTROLLER. PHOTOELECTRIC SENSOR. DIGITAL TEMPERATURE CONTROL.

COMBI 2-EZ TAPE BOTTOM SEAL CASE ERECTOR WITH: PRODUCTION OUTPUT: UP TO 12 CASES PER MINUTE DEPENDING ON CASE SIZE. CASE SIZES: MINIMUM: 6 INCH LONG X 4.5 INCH WIDE X 4.5 INCH TALL MAXIMUM: 20 INCH LONG X 16 INCH WIDE X 18 INCH TALL DISCHARGE HEIGHT FROM GROUND: 29 INCH PUSH ARM LOADER EZ ADJUST CHANGEOVER SYSTEM MOUNTED ON CASTERS ELECTRICAL REQUIREMENTS: 120 VOLTS / SINGLE PHASE / 60 HERTZ LAST BLANK RAN: 12.5 INCH TALL X 21 INCH WIDE

BIZERBA MODEL GLI WEIGH PRICE LABELING MACHINE SYSTEM. PRINTING TECHNOLOGY: DIRECT THERMAL. MINIMUM LABEL SIZE: WIDTH: 1.18 INCH HEIGHT: 1.18 INCH. MAXIMUM: WIDTH: 4.72 INCHES HEIGHT: 5.90 INCHES. WEIGHING RANGE: 3.3 POUNDS TO 6.6 POUNDS (WITH AN ACCURACY OF E=.035 OUNCE). LABEL ROLL: CORE DIAMETER: 3 INCHES OUTER DIAMETER: 11.8 INCHES. PRINT SPEED: UP TO 11.8 INCHES PER SECOND, PRODUCT DEPENDENT. VISION SYSTEM: LABELSECURE BASIC. RESOLUTION: 8 DOTS PER MM. ELECTRICAL REQUIREMENTS: 4.8 AMPS, 60 HERTZ, 120 VOLTS. PRODUCT LAST RAN: 6 OUNCE RIBEYE AND 8-12 OUNCE NEW YORK STRIPS. MODEL: GLM-IEVO

COMBI E-2000 TAPE BOTTOM SEAL CASE ERECTOR WITH HAND PACK STATION. PRODUCTION SPEED: UP TO 15 CASES PER MINUTE. MINIMUM CASE SIZE (INCHES): LENGTH: 8.5 WIDTH: 4.75 HEIGHT: 4. MAXIMUM CASE SIZE (INCHES): LENGTH: 16.5 WIDTH: 12.75 HEIGHT: 19.5. TOP CONVEYOR DIMENSIONS (INCHES): LENGTH: 130 WIDTH: 12. BOTTOM CONVEYOR DIMENSIONS (INCHES): LENGTH: 70 WIDTH: 8. OVERALL DIMENSIONS (INCHES): LENGTH: 137 WIDTH: 69 HEIGHT: 65. STAINLESS STEEL CONTACT PARTS. TOUCH SCREEN CONTROLS. SUCTION PICKOFF FOR CASES. ELECTRICAL REQUIREMENTS: 3 PHASE, 60 HERTZ, 230 VOLTS. S/N: E-2000

ENDFLEX BOXXER T-12 AUTOMATIC RIGHT HAND CASE ERECTOR. AUTOMATICALLY ERECTS CORRUGATED RSC OR HSC CASES AND SEALS THEM WITH TAPE. OUTPUT: UP TO 12 CYCLES PER MINUTE DEPENDING ON CASE SIZE. BLANK CASE SIZE RANGE: LENGTH: 11 TO 24 INCH, WIDTH: 6 TO 15 INCH. MAXIMUM INFEED WIDTH: 39 INCH. OMRON PLC. ELECTRICAL SPECIFICATION: 120 VOLTS / 50 HERTZ /1 PHASE.

HOBART NGW2 LS2LR STAINLESS STEEL STRETCH FILM TRAY SEALER WITH WEIGHING AND LABELING. THE NGW USES AN ADVANCED SENSOR SYSTEM AND CAMERA TECHNOLOGY TO AUTOMATICALLY SIZE YOUR PACKAGE, WEIGH, AND OPTIMIZE FILM EFFICIENCY BY VARIABLE FILM ROLL SELECTION AND CUT LENGTH. THE NGW THEN AUTOMATICALLY STRETCHES FILM AROUND ALL 4 SIDES, SEALS THE TRAY, COMPUTES PRICE AND APPLIES THE LABEL. ELECTRIC MOTORS POWER WEIGHER/SCALE INTAKE CONVEYOR AND AUTO-CENTERING. THE NGW IS A TANK-BASED PNEUMATICS POWER WRAPPING SYSTEM. THE NGW ALLOWS OPERATORS TO MONITOR PACKAGE INFORMATION AND CONTROLS DURING THE WRAP PROCESS ON THE 14" TOUCHSCREEN DISPLAY. EMERGENCY START AND STOP SWITCHES ON THE FRONT OF UNIT ALLOW OPERATORS TO STOP THE WRAP PROCESS AT ANY TIME IN CASE OF EMERGENCY. WEIGHING CAPACITY (POUNDS): MANUAL: 30 AUTOMATIC MODE: 20. WEIGHING INCREMENTS: DUAL RANGE CAPABLE 30 X 0.01 POUNDS, 12 X 0.005 POUNDS, 15 X 0.005 KILOGRAMS, 6 X 0.002 KILOGRAMS. MINIMUM WEIGHT TO PRINT: 0.20 POUNDS. LABEL WIDTH: 1.5, 2.25, AND 3 INCHES. LABEL LENGTH: 1.5 - 4 INCHES, 0.5 INCH INCREMENTS. WRAPPING SPEED: UP TO 30 PACKAGES PER MINUTE, DEPENDING ON APPLICATION. PACKAGE SIZE (INCHES): LENGTH: 4.5 - 10.1, WIDTH: 4.5 - 15, HEIGHT: 0.4 - 6. TYPE OF FILM USED: PVC. FILM THICKNESS: 60 GAUGE MIN, 100 GAUGE MAX. FILM CORE DIAMETER: 3 INCHES I.D. FILM MAXIMUM DIAMETER: 9.5 INCHES O.D. FILM WIDTHS: 15 - 20 INCHES. PRICING CAPACITY: 999.99 IN STEPS OF 0.01. OVERALL DIMENSIONS (INCHES): LENGTH: 88.5, WIDTH: 46, HEIGHT: 69. FULLY AUTOMATIC, OPERATOR PLACES PACKAGE INTO THE NGW, WEIGHING, WRAPPING AND LABELING IS ALL DONE AUTOMATICALLY. CAN SUPPORT AND HAS THE MEMORY FOR UP TO 999,999 1-6 DIGIT PLU CODES. 8GB STORAGE MEDIA. EMERGENCY SAFETY STOP SWITCH ON FRONT OF UNIT. AUTO OFF/ON TIMER FOR HEATED SEALER BELT. TOUCH SCREEN CONTROLS. MOUNTED ON WHEEL FOR MOBILITY. SHIPPING WEIGHT: 1,300 POUNDS, APPROXIMATELY. ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 15 AMPS. MODEL: NGW2.