Monthly Machinery Auction Surplus from Manufacturers Plants
Category: CNC MACHINE CENTERS
Total Lots:
34
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2011 | HAAS | ST-20Y |
2011 HAAS ST-20Y TURNING CENTER RUN HOURS: 2,818 SPINDLE HOURS: 2,504 RIGID TAPPING M19 SPINDLE ORIENTATION MEMORY: 16MB TOOL PRESETTER HIGH INTESITY LIGHTS NETWORKING
|
🔒 Subscribe |
|
|
2014 | MURATEC | MW120 |
2014 MURATEC MW120 TWIN SPINDLE CNC LATHE RO5100
|
🔒 Subscribe |
|
|
2012 | MURATEC | MW120 |
2012 MURATEC MW120 TWIN SPINDLE CNC LATHE RO5101
|
🔒 Subscribe |
|
|
2007 | OKUMA | 2SP-150H |
2007 OKUMA 2SP-150H TWIN SPINDLE CNC LATHE S/N: RO0002
|
🔒 Subscribe |
|
|
TAKISAWA | TC-200 L3 |
TAKISAWA TC-200 L3 CNC TURNING CENTER
|
🔒 Subscribe | |
|
|
TAKISAWA | TC-200 L3 |
TAKISAWA TC-200 L3 CNC TURNING CENTER
|
🔒 Subscribe | |
|
|
WILTON | 2445 |
WILTON 2445 SINGLE SPINDLE DRILL PRESS W/ POWER FEED 30" SWING DIAMETER, 10" SPINDLE TRAVEL, #4 MT IN SPINDLE, 23.5" X 33.5" TABLE AREA, SPINDLE RPM 55 -1338, FEED RANGE: .003 - .013 IPR, 4 HP SPINDLE MOTOR, WEIGHT: 2,500 LBS. EQUIPPED WITH: POWER FEED GEAR BOX W/ELECTRO-MAGNETIC CLUTCH, DIRECT DRIVE - ROUND COLUMN, AUTOMATIC TAPPING CONTROL, POWER DOWN-FEED TO SPINDLE, HAND WHEEL FOR FINE FEED, COOLANT SYSTEM (BUILT-IN BASE)
|
🔒 Subscribe | |
|
|
LNS | QL SERVO S3 |
LNS QL SERVO S3 BAR LOADER
|
🔒 Subscribe | |
|
|
1997 | ZEISS | ECLIPSE CMM MODEL#: SYS;EC,2840 DCC, TS, C99/II |
1997 ZEISS ECLIPSE CMM MODEL#: SYS;EC,2840 DCC, TS, C99/II S/N:CMM971004255
|
🔒 Subscribe |
|
|
DAVENPORT | 3/4" 5 SHORT BED |
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE
|
🔒 Subscribe | |
|
|
DAVENPORT | 3/4" 5 SHORT BED SCREW MACHINE |
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE
|
🔒 Subscribe | |
|
|
DAVENPORT | 3/4" 5 SHORT BED SCREW MACHINE |
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE
|
🔒 Subscribe | |
|
|
1969 | WOTAN | B75 |
1969 WOTAN B75 HORIZONTAL BORING MILL W/ DRO SPINDLE DIAMETER: 3 SPINDLE: #40 SPINDLE QUILL TRAVEL: 23.5 TABLE SIZE: 31.5 X 39.5 BUILT IN ROTARY TABLE VERTICAL HEAD TRAVEL: 34 TABLE TRAVEL: 48 LONGITUDINAL SADDLE TRAVEL: 31.5 SPINDLE SPEEDS: (20) 15 TO 1,200 RPM THREADING CAPABILITY: 3 TO 48 TPI CAPACITY: 4,000 LBS. RIGHT ANGLE HEAD: YES PENDANT CONTROL: YES MOTOR: 10 HP POWER: 480 VAC, 3 PHASE DIMENSIONS: 12 X 9 X 10 H (APPROX.) WEIGHT: 20,000 LBS. (APPROX.) EQUIPPED WITH: DIGITAL READOUT 3-AXIS ROTARY TABLE
|
🔒 Subscribe |
|
|
2015 | ERDWICH | M600/1-400 |
2015 ERDWICH M600/1-400 SHREDDER S/N: 2668 RO7171
|
🔒 Subscribe |
|
|
GRACO / HB FULLER | 24V014 |
GRACO / HB FULLER LIQUAMELT ADHESIVE PUMP MOD#24V014 4 LINES OR CHANNELS HOT OR COLD LIQUID ADHESIVE MAX FLUID PRESSURE 1000 PSI MAX OPERATING TEMP 400 DEG F USES 75 PSI SHOP AIR 230 VOLT SINGLE PHASE POWER HAS AN ADHESIVE TANK ATTACHED, BLACK U SHAPE AROUND THE PUMP. CAN ALSO HOOK UP TO 5 GALLON PAIL, 55 GALLON DRUM, OR TOTE. THE BLACK MANIFOLD IS FOR HEATING THE ADHESIVE AND HOOKING UP THE HEATED HOSES TO. THE UNIT IN THE PICTURES IS A DISPLAY MODEL.
|
🔒 Subscribe | |
|
|
TAKISAWA | TC-2 |
TAKISAWA TC-2 CNC LATHE RO0100
|
🔒 Subscribe | |
|
|
TAKISAWA | TC-2 |
TAKISAWA TC-2 CNC LATHE RO0101
|
🔒 Subscribe | |
|
|
TAKISAWA | TC-2 |
TAKISAWA TC-2 CNC LATHE RO0103
|
🔒 Subscribe | |
|
|
1988 | TOYODA | GUP32X100 |
1988 TOYODA GUP32X100 ID/OD GRINDER. SERIAL #: 3677-ZM79 SERIAL #: RB8592 GENERAL SPECIFICATIONS ARE APPROXIMATE AND ARE SUBJECT TO VERIFICATION. NOTES : SWING - 12 " CENTERS - 40 " POWER - 5 HP WORK HEAD SPINDLE SPEED - 16 RPM GRINDING WHEEL DIA. - 14 " MAX WEIGHT BETWEEN CENTERS - 330 LBS. PLUNGE (YES/NO) - YES 220 THREE PHASE RADIUS DRESSER THAT BOLTS TO THE TABLE TWO STEADY RESTS: 2-POINT AND 3-POINT NO ID QUILL OR CHUCKS HAS BRACKETS AND MOTOR FOR THE ID QUILL THAT HAVEN'T BEEN USED
|
🔒 Subscribe |
|
|
1979 | PARKER MAJESTIC | 2Z |
1979 PARKER MAJESTIC 2Z SURFACE GRINDER - 6" X 18" LONGITUDINAL TRAVEL: 18", CROSS TRAVEL: 6", VERTICAL TRAVEL: 20", WHEEL SIZE: 8 DIAMETER X 5/8 W X 1 14 DIAMETER HOLE, MOTOR SIZE: 1 HP. EQUIPPED WITH: POWER ELEVATION, 6 X 18 PERM MAGNETIC CHUCK. DIMENSIONS: 54 (LR) X 54 (FB) X 72 (H)", APPROX. WEIGHT: 1500 LBS. S/N: 3677-ZM79
|
🔒 Subscribe |
|
|
1996 | SANTEC | RB10 |
1996 SANTEC RB10 CNC BED MILL W/ KMX PROTOTRAK CONTROL. TABLE WORKING SURFACE: 9 X 42. LONGITUDINAL TRAVEL: 30. CROSS TRAVEL: 12. HEAD TRAVEL: 18. MAX HEIGHT TABLE TO SPINDLE: 18. QUILL TRAVEL: 5. SPINDLE SPEEDS: VARIABLE SPEED 60 TO 4500 RPM. TAPER IN SPINDLE: R8. MAIN DRIVE MOTOR: 3HP. ELECTRICALS: 220/440 V. APPROX. WEIGHT: 2,200 LBS. APPROX. DIMENSIONS: 51 L X 60 W X 90H
|
🔒 Subscribe |
|
|
1995 | SANTEC | RB10 |
1995 SANTEC RB10 CNC BED MILL W/ SMX PROTOTRAK CONTROL. TABLE WORKING SURFACE: 9 X 42. LONGITUDINAL TRAVEL: 30. CROSS TRAVEL: 12. HEAD TRAVEL: 18. MAX HEIGHT TABLE TO SPINDLE: 18. QUILL TRAVEL: 5. SPINDLE SPEEDS: VARIABLE SPEED 60 TO 4500 RPM. TAPER IN SPINDLE: R8. MAIN DRIVE MOTOR: 3HP. ELECTRICALS: 220/440 V. APPROX. WEIGHT: 2,200 LBS. APPROX. DIMENSIONS: 51 L X 60 W X 90H
|
🔒 Subscribe |
|
|
KALAMAZOO | K20SW-PHV |
KALAMAZOO K20SW-PHV 20" SEMI-AUTO WET ABRASIVE SAW. COMES WITH 62 SAW DISCS/BLADES. DIRTY BUT WORKING CONDITION WITH ALL THE PUMPS AND HOSES
|
🔒 Subscribe | |
|
|
CULLEN FRIESTEDT |
CULLEN FRIESTEDT WELDING POSITIONER 48 DIAMETER CHUCK RUNS ON 480 VOLT 3 PHASE WEIGHS 6580 LBS. RUNS IN VERTICAL OR HORIZONAL VARIABLE SPEED FORWARD AND REVERSE THE TAG IS MISSING
|
🔒 Subscribe | ||
|
|
2019 | WILLIS | 5000VS |
2019 WILLIS 5000VS VERTICAL MILL TABLE: 12" X 59" MAX TRAVEL: 15" X 47" 5HP 40 TAPER RPM: 60-3,600 VARIABLE SPEED BOX WAYS FOR KNEE AND COLUMN 12 SPEED GEARBOX FOR TABLE FEED WITH RAPID KNEE RAISING MOTOR AUTO LUBE FLOOD COOLANT MACHINE WEIGHT: 5,000 LBS. DIMENSIONS: 84" X 62" X 95" VOLTAGE: 460V
|
🔒 Subscribe |
|
|
2018 | AODEST | GS4028 |
2018 AODEST GS4028 HORIZONTAL BAND SAW. BAND SAW SENSOR AND BUTTON SENSOR, HAS ISSUES. SOMETIME TURNS OFF THE SAW. THE SAW WAS HOOKED UP TO A TRANSFORMER, THE POWER CORD DOES NOT HAVE AN END ON IT.
|
🔒 Subscribe |
|
|
RANSOHOFF | RO0021 |
RANSOHOFF RO0021 STAINLESS STEEL PARTS WASHER STAINLESS 8" WIDE BELT 27' LONG 8' WIDE 6' TALL BLOWER ON TOP ANOTHER 4"
|
🔒 Subscribe | |
|
|
TAKISAWA | TC-2 |
TAKISAWA TC-2 CNC LATHE RO0102
|
🔒 Subscribe | |
|
|
2001 | MURATEC | MW120 |
2001 MURATEC MW120 TWIN SPINDLE CNC LATHE RO3050
|
🔒 Subscribe |
|
|
2013 | HASTEST SOLUTIONS | HOT-500YUCF |
2013 HASTEST SOLUTIONS HOT-500YUCF TEMPERATURE CHAMBER S/N: 1301003
|
🔒 Subscribe |
|
|
CAMPBELL | S-I600 |
CAMPBELL S-I600 CNC GRINDER SPECS & NOTES FROM SELLER: BARELY USED FROM LARGE MFG TOOL ROOM X AXIS TRAVEL 4" Z AXIS TRAVEL 6" SPINDLE SPEED 340 TO 590 RPM RUNS ON 460 VOLT 3 PHASE THE MACHINE WAS PUT BACK ON THE ORIGINAL SHIPPING PALLET
|
🔒 Subscribe | |
|
|
OMEGA RECYCLING TECHNOLOGIES | RSP300 |
OMEGA RECYCLING TECHNOLOGIES RSP300 SOLVENT PURIFIER CAPACITY 54 L/H 440 VOLT 3 PHASE
|
🔒 Subscribe | |
|
|
2017 | MURATEC | MW40 |
2017 MURATEC MW40 TWIN SPINDLE CNC TURNING CENTER
|
🔒 Subscribe |
|
|
2019 | MURATEC | MW40 |
2019 MURATEC MW40 TWIN SPINDLE CNC TURNING CENTER
|
🔒 Subscribe |
2011 HAAS ST-20Y
2011 HAAS ST-20Y TURNING CENTER RUN HOURS: 2,818 SPINDLE HOURS: 2,504 RIGID TAPPING M19 SPINDLE ORIE...
2014 MURATEC MW120
2014 MURATEC MW120 TWIN SPINDLE CNC LATHE RO5100...
2012 MURATEC MW120
2012 MURATEC MW120 TWIN SPINDLE CNC LATHE RO5101...
2007 OKUMA 2SP-150H
2007 OKUMA 2SP-150H TWIN SPINDLE CNC LATHE S/N: RO0002...
TAKISAWA TC-200 L3
TAKISAWA TC-200 L3 CNC TURNING CENTER...
TAKISAWA TC-200 L3
TAKISAWA TC-200 L3 CNC TURNING CENTER...
WILTON 2445
WILTON 2445 SINGLE SPINDLE DRILL PRESS W/ POWER FEED 30" SWING DIAMETER, 10" SPINDLE TRAVEL, #4 MT I...
LNS QL SERVO S3
LNS QL SERVO S3 BAR LOADER...
1997 ZEISS ECLIPSE CMM MODEL#: SYS;EC,2840 DCC, TS, C99/II
1997 ZEISS ECLIPSE CMM MODEL#: SYS;EC,2840 DCC, TS, C99/II S/N:CMM971004255...
DAVENPORT 3/4" 5 SHORT BED
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE...
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE...
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE
DAVENPORT 3/4" 5 SHORT BED SCREW MACHINE...
1969 WOTAN B75
1969 WOTAN B75 HORIZONTAL BORING MILL W/ DRO SPINDLE DIAMETER: 3 SPINDLE: #40 SPINDLE QUILL TRAVEL: ...
2015 ERDWICH M600/1-400
2015 ERDWICH M600/1-400 SHREDDER S/N: 2668 RO7171...
GRACO / HB FULLER 24V014
GRACO / HB FULLER LIQUAMELT ADHESIVE PUMP MOD#24V014 4 LINES OR CHANNELS HOT OR COLD LIQUID ADHESIVE...
TAKISAWA TC-2
TAKISAWA TC-2 CNC LATHE RO0100...
TAKISAWA TC-2
TAKISAWA TC-2 CNC LATHE RO0101...
TAKISAWA TC-2
TAKISAWA TC-2 CNC LATHE RO0103...
1988 TOYODA GUP32X100
1988 TOYODA GUP32X100 ID/OD GRINDER. SERIAL #: 3677-ZM79 SERIAL #: RB8592 GENERAL SPECIFICATIONS ARE...
1979 PARKER MAJESTIC 2Z
1979 PARKER MAJESTIC 2Z SURFACE GRINDER - 6" X 18" LONGITUDINAL TRAVEL: 18", CROSS TRAVEL: 6", VERTI...
1996 SANTEC RB10
1996 SANTEC RB10 CNC BED MILL W/ KMX PROTOTRAK CONTROL. TABLE WORKING SURFACE: 9 X 42. LONGITUDINAL ...
1995 SANTEC RB10
1995 SANTEC RB10 CNC BED MILL W/ SMX PROTOTRAK CONTROL. TABLE WORKING SURFACE: 9 X 42. LONGITUDINAL ...
KALAMAZOO K20SW-PHV
KALAMAZOO K20SW-PHV 20" SEMI-AUTO WET ABRASIVE SAW. COMES WITH 62 SAW DISCS/BLADES. DIRTY BUT WORKIN...
CULLEN FRIESTEDT
CULLEN FRIESTEDT WELDING POSITIONER 48 DIAMETER CHUCK RUNS ON 480 VOLT 3 PHASE WEIGHS 6580 LBS. RUNS...
2019 WILLIS 5000VS
2019 WILLIS 5000VS VERTICAL MILL TABLE: 12" X 59" MAX TRAVEL: 15" X 47" 5HP 40 TAPER RPM: 60-3,600 V...
2018 AODEST GS4028
2018 AODEST GS4028 HORIZONTAL BAND SAW. BAND SAW SENSOR AND BUTTON SENSOR, HAS ISSUES. SOMETIME TURN...
RANSOHOFF RO0021
RANSOHOFF RO0021 STAINLESS STEEL PARTS WASHER STAINLESS 8" WIDE BELT 27' LONG 8' WIDE 6' TALL BLOWER...
TAKISAWA TC-2
TAKISAWA TC-2 CNC LATHE RO0102...
2001 MURATEC MW120
2001 MURATEC MW120 TWIN SPINDLE CNC LATHE RO3050...
2013 HASTEST SOLUTIONS HOT-500YUCF
2013 HASTEST SOLUTIONS HOT-500YUCF TEMPERATURE CHAMBER S/N: 1301003...
CAMPBELL S-I600
CAMPBELL S-I600 CNC GRINDER SPECS & NOTES FROM SELLER: BARELY USED FROM LARGE MFG TOOL ROOM X AXIS T...
OMEGA RECYCLING TECHNOLOGIES RSP300
OMEGA RECYCLING TECHNOLOGIES RSP300 SOLVENT PURIFIER CAPACITY 54 L/H 440 VOLT 3 PHASE...
2017 MURATEC MW40
2017 MURATEC MW40 TWIN SPINDLE CNC TURNING CENTER...
2019 MURATEC MW40
2019 MURATEC MW40 TWIN SPINDLE CNC TURNING CENTER...