MultiLocation Auction Late Model CNC Machining Centers CNC Lathes Aerospace Robots Automation

2014 ACCUPRESS ABSOLUTE 3758 75 TON SERVO-HYDRAULIC PRESS BRAKE 96" BEND LENGTH ACCU-CROWN BED CROWNING JOYSTICK Z1 & Z2 (2) FRONT SUPPORTS W/ DELEM DA-56S CONTROLLER W/ SENTINEL PROTECTION SYSTEM W/ FOOT CONTROL

2017 HAAS VF-2 CNC VERTICAL MACHINING CENTER - 8,100 RPM INLINE DIRECT DRIVE CAT-40 30" X-AXIS 16" Y-AXIS 20" Z-AXIS 36" X 14" TABLE SIZE 20 STATION AUTOMATIC TOOL CHANGER PROGRAMMABLE COOLANT NOZZLE HIGH-SPEED MACHINING RIGID TAPPING 1 GB MEMORY / WIFI / ETHERNET / HAAS CONNECT MEDIA DISPLAY, M-CODE, M130 55 GALLON COOLANT TANK AND PUMP CHIP AUGER HIGH-INTENSITY LIGHTING 30 HP MOTOR

2009 MITSUBISHI FA20S ADVANCE CNC WIRE EDM - 15" TOUCH SCREEN CONTROL 3-D ADVANCE 19.7" X-AXIS TRAVEL 13.8" Y-AXIS TRAVEL 11.8" Z-AXIS TRAVEL 3" U-AXIS TRAVEL 3" V-AXIS TRAVEL 30.71" X 24.8" TABLE DIMENSIONS 41.34" X 31.50" INSIDE TANK DIMENSIONS +3" LONG STROKE TAPER UNIT 41.34" W X 31.5" D X 11.61" H MAX WORKPIECE DIMENSIONS 3,300 LBS. MAX WORKPIECE WEIGHT 15 DEGREES @ 10.25" DEGREE TAPERING CUT 195 GALLONS TANK CAPACITY .004" - .006" AUTO THREADING WIRE DIAMETER REMOTE PENDANT CONTROL FINE MACHINING SYSTEM TANK DOOR AUTO LOCK WIRE ALIGNMENT DEVICE X /Y LINEAR SCALES ANGLE MASTER S / W PRECISION TYPE 7/3 MICRO FILTER UNIT COOLER EXPANDABLE INTERFACE USB MACHINING ADAPTIVE CONTROL HIGH SPEED ANTI ELECTROLYSIS POWER SUPPLY

2014 HYDMECH H-10A CNC HORIZONTAL AUTOMATIC BAND SAW - CAPACITY: 10" X 10" BLADE: 1-1/4" X 12'6" X .042" BLADE SPEED: 50 - 350 FPM (VARIABLE FREQUENCY DRIVE) BLADE GUIDES: CARBIDE BLADE WHEEL DIAMETER: 16" GUIDE ARM AUTOMATIC (VISE DRIVEN MOUNTED ON LINEAR BEARINGS) BLADE MOTOR: 5 HP HYDRAULIC MOTOR: 1 HP HYDRAULIC TANK CAPACITY: 4 GALLONS COOLANT TANK CAPACITY: 15 GALLONS VISE CONTROL: HYDRAULIC FULL STROKING SHUTTLE STROKE: 0-24" (MULTI INDEX CAPABLE) DISCHARGE TABLE: 10" TABLE HEIGHT: 31" COOLANT TYPE: FLOOD 480 VOLT 3 PHASE APPROX. DIMENSIONS: 83" X 68" X 67" APPROX. WEIGHT: 3,500 LBS.

2014 HEM V100-LM3 AUTOMATIC TILTING HEAD VERTICAL BAND SAW - 18" X 22" (H) CAPACITY 18" (L) X 15" (H) CAPACITY @ 45 DEGREES (L) 18" (R) X 14" (H) CAPACITY @ 45 DEGREES (R) 1.25" X 15" X .042" BLADE 5 HORSEPOWER MOTOR MANUAL CONTROL CONSOLE ON FRONT OF SAW AIR POWERED BLADE TENSION ADJUSTABLE CLAMPING PRESSURE (0-1,000 LBS) ADJUSTABLE FEED RATE & CUTTING PRESSURE POWERED TILT W/ ANGLE READOUT FLOOD COOLANT SYSTEM BOLTABLE SIDE WINGS FOR COOLANT DRAINAGE BLADE CHIP BRUSH FORWARD CUT-STOP FLAT CARBIDE BLADE GUIDES BLADE GUARDS FOR SAFETY POWERED GUIDE ARM 220/440/3PH MOTOR

1999 HAAS SL-30T CNC TURNING CENTER WITH HYDRAULIC TAILSTOCK AND TOOL PRE-SETTER - 3,400 RPM 10" 3-JAW KITAGAWA CHUCK 3" BAR CAPACITY 32" MAX LENGTH 17" DIAMETER 30" SWING 12 STATION TURRET AUTOMATIC TOOL PRE-SETTER PROGRAMMABLE HYDRAULIC TAILSTOCK 22,064 HOURS POWER ON TIME 15,625 HOURS CYCLE START TIME 13,516 HOURS FEED CUTTING TIME COOLANT TANK AND PUMP 30HP CHIP CONVEYOR

2014 HAAS HRTA6 ROTARY TABLE WITH 5C COLLET CHUCK AND A6AC PNEUMATIC CLOSER - SIGMA 1 SERVO MOTOR 5C COLLET CHUCK A6AC PNEUMATIC CLOSER THE HRTA6 ROTARY TABLE IS BASED ON THE HRT210 MODEL. IT HAS AN A1-6 SPINDLE NOSE INSTEAD OF THE T-SLOT PLATTER. THIS ALLOWS CHUCKS, FACEPLATES, AND COLLET CHUCKS TO BOLT DIRECTLY TO THE ROTARY SPINDLE NOSE. WITH THE PNEUMATIC COLLET CLOSER THIS UNIT WILL ACCEPT A WIDE VARIETY OF WORK HOLDING OPTIONS. S/N: 231136

2005 FADAL VMC 5020A-HT VERTICAL MACHINING CENTER - FADAL CNC MULTI-PROCESSOR CONTROL 7,500 RPM CAT-40 SPINDLE 50" X-AXIS TRAVELS 20" Y-AXIS TRAVELS 20" Z-AXIS TRAVELS 52"L X 20"W TABLE SIZE 21-STATION ATC RIGID TAPPING COOLANT TANK AND PUMP CHIP CONVEYOR

2014 HEXAGON ROMER RA-7535 ROMER RA-7535 CMM 6' ARM ROMER MOBILITY PACK FACTORY HEXAGON/ROMER TRAVEL CASE PROBES W/CASE TUBE INSPECT HEAD W/CASE TRI-MOUNT MAGNETIC BASE

2013 BELMONT MAXICUT MX-246 ZNC SINKER EDM MACHINE - 18.5" X-AXIS TRAVELS 14.9" Y-AXIS TRAVELS 7.2" Z-AXIS TRAVELS 11.8" BACK SLIDE 29.5"L X 15.7"W WORK TABLE 4.5" - 23.6" OPEN HEIGHT 2,860 POUND MAX WORK PIECE WEIGHT 330 POUND MAX ELECTRODE WEIGHT ON T SLOT PLATEN 47.2"L X 27.5"W X 14.9"H TANK DIMENSIONS 12.9" MAX OIL LEVEL 165 GALLON DIELECTRIC RESERVOIR CAPACITY 100 A MAXIMUM PEAK MACHINING CURRENT ALL AVAILABLE MANUALS TRI MIST 850 MIST COLLECTOR FLOOR SPACE DIMS: 100"W X 74"W X 98"H WEIGHT: 4,620 POUNDS 220V ELECTRIC BELMONT BROCHURE:

200MM PLATTER 5-AXIS TRUNNION TABLE - MORI SEIKI 5AX-DDRT200X ROTARY TABLE DIRECT DRIVE ROTARY TABLE 180MM / 7.08" HEIGHT TO CENTER 65MM / 2.55" NOSE HOLE DIAMETER 66 POUND MAX WEIGHT ON PLATER DIMS: 22.08"L X 23.38"W X 12.38"H WEIGHT: 606 POUNDS

WARNER & SWASEY M-3550 4A SQUARE HEAD SADDLE TYPE TURRET LATHE - 4A WARNER & SWASEY M-3550 SQUARE HEAD SADDLE TYPE TURRET LATHE SWING OVER BED: 28-1/4" SWING OVER CARRIAGE: 22-7/16" MAX. DIST. SPINDLE TO TURRET FACE: 80-3/16" CROSS SLIDE CROSS TRAVEL: 17" HEXAGON TURRET LONG. TRAVEL: 68-3/8" SPINDLE SPEEDS: 20 - 526 RPM SPINDLE MOTOR: 50 HP EQUIPPED WITH: 3-JAW CHUCK 4-WAY TOOL POST ON CROSS SLIDE HEXAGONAL TOOL TURRET S/N: 3577-5034

SUZHOU LINGOU AUTOMATION HEAT PRESS MACHINE

2006 NIIGATA HN-63D 4-AXIS CAT-50 CNC HORIZONTAL MACHINING CENTER - FANUC 16I CONTROL 7,000 RPM 2 SPEED GEARED SPINDLE CAT-50 42.5"- X AXIS 36.6"- Y AXIS 32.7"- Z AXIS 24.8" X 24.8" PALLET SIZE (2) PALLETS FULL 4TH - B AXIS 60 STATION AUTOMATIC TOOL CHANGER 360,000 POSITION TABLE INDEXING HIGH PRESSURE THROUGH SPINDLE COOLANT RIGID TAPPING BOX WAYS SPINDLE CHILLER 0 - 33.5" SPINDLE CENTER TO PALLET SURFACE. 7.9" - 37.4" SPINDLE NOSE TO TABLE CENTER 787 IPM X, Y/Z 709 IPM RAPID TRAVERSE RATE 25 HP MOTOR COOLANT TANK AND PUMP CHIP CONVEYOR ALL AVAILABLE MANUALS UNDER POWER MAKING CHIPS

2022 TUCKER SPR SELF PIERCING RIVETER BRAND NEW IN CRATE SELF-PIERCING RIVETS ARE THE CONNECTING ELEMENT FOR JOINING ALUMINUM PARTS, MIXED CONNECTIONS, COMBINED JOINING AND GLUING WITHOUT EMISSIONS. 9MM TOTAL SHEET THICKNESS THICK TO THIN JOINING .05MM SERVO DRIVE ACCURACY 100% SERVO-ELECTRIC DRIVE 80KN FORCE CAPABILITY ROBOT-CARRIED OR PEDESTALMOUNTED TOOLS CAN BE SHARED WITH OTHER DEVICES STANDARD C-STYLE, LARGEST VARIETY CDH 3+ LAYERS HSS STEEL 600-1K MPA ENCLOSURES UHSS STEEL 1-1.6K MPAVA, B OR C PILLAR DUPLEX CFRP EXTREME LIGHT WEIGHT

2022 AOT-SASM-200C SEMI-AUTOMATIC BATTERY ELECTRODE LAYER BY LAYER STACKING MACHINE FOR POUCH CELL STACKABLE SIZE:200MM*150MM STACKABLE LAYERS: MAX 350 LAYERS PRODUCT DESCRIPTION: AOT-SASM-200C IS A HIGH-ACCURACY AUTOMATIC STACKING MACHINE WITH MANY ADVANCED FEATURES TO ENSURE A STABLE, REPEATABLE AND PRECISE BATTERY ELECTRODE STACKING.

ADAPTEC SOLUTIONS MD MATE ROBOTIC 4 DRAW ROBOT MACHINE TENDER / MD ROBOTIC MINI DRAWER - ADAPTEC SOLUTIONS MD MATE ROBOTIC MACHINE TENDER / MD ROBOTIC MINI DRAWER 4 DRAWS 24W X 16D X 4H FIXTURE AREA THREE-POSITION DRAWER LOCKING, FOR ROBOT DRAWER POSITION SENSORS CONNECTED TO ETHERNET THE MD ROBOTIC MINIDRAWER CABINET PROVIDES CONVENIENT AND COMPACT PARTS STORAGE FOR PART PROCESSING SMALL PARTS WITHIN A ROBOTIC AUTOMATION CELL. ROBOTIC MACHINE TENDING USES INDUSTRIAL OR COLLABORATIVE ROBOTS TO SERVICE CNCS, LATHES, MILLS, GRINDERS, INJECTION MOLD, OR VIRTUALLY ANY MACHINE THE PRIMARY GOAL OF A MACHINE TENDING SYSTEM IS TO AUTOMATE THE LOADING AND UNLOADING OF PARTS INTO AND OUT OF THE MACHINES, OPTIMIZING EFFICIENCY, REDUCING LABOR, AND IMPROVING OVERALL PRODUCTIVITY.

MOTEC PDM32 POWER DISTRIBUTION MODULES - DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS, SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS TO SIMPLIFY WIRING AND SWITCH REQUIREMENTS, WHILE INCREASING RELIABILITY. INPUTS: 23 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS 115 A TRANSIENT (TYPICAL) 24 X 8 A OUTPUTS: 8 A CONTINUOUS 60 A TRANSIENT (TYPICAL)

2 MOTEC PDM32 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS, SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS TO SIMPLIFY WIRING AND SWITCH REQUIREMENTS, WHILE INCREASING RELIABILITY. INPUTS: 23 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS 115 A TRANSIENT (TYPICAL) 24 X 8 A OUTPUTS: 8 A CONTINUOUS 60 A TRANSIENT (TYPICAL)

2 MOTEC PDM32 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS, SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS TO SIMPLIFY WIRING AND SWITCH REQUIREMENTS, WHILE INCREASING RELIABILITY. INPUTS: 23 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS 115 A TRANSIENT (TYPICAL) 24 X 8 A OUTPUTS: 8 A CONTINUOUS 60 A TRANSIENT (TYPICAL)

2X MOTEC PDM 30 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS AND SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS, SIMPLIFYING WIRING AND REDUCING WEIGHT,WHILE INCREASING RELIABILITY. PROVIDES FULL DIAGNOSTIC INFORMATION VIA CAN INPUTS 16 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS, 115 A TRANSIENT (TYPICAL) 22 X 8 A OUTPUTS: 8 A CONTINUOUS, 60 A TRANSIENT (TYPICAL)

MOTEC PDM32 POWER DISTRIBUTION MODULES - 2- MOTEC PDM32 DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS, SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS TO SIMPLIFY WIRING AND SWITCH REQUIREMENTS, WHILE INCREASING RELIABILITY. INPUTS: 23 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS 115 A TRANSIENT (TYPICAL) 24 X 8 A OUTPUTS: 8 A CONTINUOUS 60 A TRANSIENT (TYPICAL)

MOTEC PDM 30 POWER DISTRIBUTION MODULE - 2X UNITS - MOTEC PDM 30 POWER DISTRIBUTION MODULE DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS AND SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS, SIMPLIFYING WIRING AND REDUCING WEIGHT,WHILE INCREASING RELIABILITY. PROVIDES FULL DIAGNOSTIC INFORMATION VIA CAN INPUTS 16 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS, 115 A TRANSIENT (TYPICAL) 22 X 8 A OUTPUTS: 8 A CONTINUOUS, 60 A TRANSIENT (TYPICAL)

2X MOTEC PDM 30 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS AND SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS, SIMPLIFYING WIRING AND REDUCING WEIGHT,WHILE INCREASING RELIABILITY. PROVIDES FULL DIAGNOSTIC INFORMATION VIA CAN INPUTS 16 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS, 115 A TRANSIENT (TYPICAL) 22 X 8 A OUTPUTS: 8 A CONTINUOUS, 60 A TRANSIENT (TYPICAL)

2X MOTEC PDM 30 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS AND SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS, SIMPLIFYING WIRING AND REDUCING WEIGHT,WHILE INCREASING RELIABILITY. PROVIDES FULL DIAGNOSTIC INFORMATION VIA CAN INPUTS 16 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS, 115 A TRANSIENT (TYPICAL) 22 X 8 A OUTPUTS: 8 A CONTINUOUS, 60 A TRANSIENT (TYPICAL)

2X MOTEC PDM 30 POWER DISTRIBUTION MODULES DESIGNED TO PROVIDE ELECTRONICALLY SWITCHED POWER TO THE VARIOUS ELECTRICAL SYSTEMS IN THE VEHICLE SUCH AS MOTORS, LIGHTS AND SOLENOIDS, AND ELECTRONIC DEVICES SUCH AS ECUS AND DATA ACQUISITION SYSTEMS. THE MODULE REPLACES CONVENTIONAL RELAYS, FUSES AND CIRCUIT BREAKERS, SIMPLIFYING WIRING AND REDUCING WEIGHT,WHILE INCREASING RELIABILITY. PROVIDES FULL DIAGNOSTIC INFORMATION VIA CAN INPUTS 16 X SWITCH INPUTS: RANGE 0 TO 51 V, RESOLUTION 0.2 V OUTPUTS 8 X 20 A OUTPUTS: 20 A CONTINUOUS, 115 A TRANSIENT (TYPICAL) 22 X 8 A OUTPUTS: 8 A CONTINUOUS, 60 A TRANSIENT (TYPICAL)

EMERSON 5700R12CBMAZZZ MICRO MOTION TRANSMITTER BRAND NEW GRAPHICAL BACKLIT DISPLAY FOUR-BUTTON OPTICAL CONTROLS FLOWMETER-STATUS LED SELF-SWITCHING AC/DC INPUT, AUTOMATICALLY RECOGNIZES SUPPLY VOLTAGE 85 TO 2405 VAC, 50/60 HZ, 6 WATTS TYPICAL, 11 WATTS MAXIMUM 18 TO 100 VDC, 6 WATTS TYPICAL, 11 WATTS MAXIMUM UNIVERSAL SERVICE PORTUNIVERSAL SERVICE PORT DESIGN ALLOWS FOR CONNECTION AND DATA TRANSFER USING STANDARD, READILY AVAILABLE EQUIPMENT. CONFIGURABLE I/O VERSIONUP TO 5 LICENSABLE CHANNELS WITH THE FOLLOWING POSSIBLE CONFIGURATIONS: 1 TO 3 4-20 MA OUTPUTS 1 TO 3 PULSE OUTPUTS 1 TO 3 DISCRETE OUTPUTS 1 TO 2 DISCRETE INPUTS 1 MA INPUT 1 MODBUS/RS-485 CHANNEL A: MA/HART CHANNEL B: MA/FO/DO CHANNEL C: MA/FO/DO/DI CHANNEL D: MA-INPUT/FO/DO/DI CHANNEL E: MODBUS RS-485 COMMUNICATION PROTOCOLWIRELESSHART

(7) ELMO MOTION CONTROL G-SOLTWI6/100SE2S GOLD SOLO TWITTER NANO SERVO DRIVE BRAND NEW IN BOX

(2) FESTO PARALLEL GRIPPERS HGPL-14-20-A-B - SIZE14 STROKE PER GRIPPER JAW 20 MM MAX. INTERCHANGEABILITY<0.2 MM MAX. GRIPPER JAW ANGULAR PLAY AX, AY<0.2 DEG MAX. GRIPPER JAW BACKLASH SZ<0.05 MM ROTATIONAL SYMMETRY0.2 MM PNEUMATIC GRIPPER REPETITION ACCURACY<0.03 MM NUMBER OF GRIPPER JAWS2 ACTUATOR SYSTEM PNEUMATIC MOUNTING POSITION ANY MODE OF OPERATION DOUBLE-ACTING GRIPPER FUNCTION PARALLEL STRUCTURAL DESIGN TWIN PISTON GUIDE PISTON GATE VALVE T-SHAPE GEAR RACK/PINION POSITION SENSING FOR PROXIMITY SENSOR SYMBOL 00991894 OPERATING PRESSURE 3 BAR ... 8 BAR MAX. OPERATING FREQUENCY OF PNEUMATIC GRIPPER <1 HZ MIN. OPENING TIME AT 6 BAR 120 MS MIN. CLOSING TIME AT 6 BAR 110 MS MAX. MASS PER EXTERNAL GRIPPER FINGER 80 G OPERATING MEDIUM COMPRESSED AIR AS PER ISO 8573-1:2010 [7:4:4] INFORMATION ON OPERATING AND PILOT MEDIA OPERATION WITH OIL LUBRICATION POSSIBLE (REQUIRED FOR FURTHER USE) CORROSION RESISTANCE CLASS (CRC)2 - MODERATE CORROSION STRESS LABS (PWIS) CONFORMITY VDMA24364-B1/B2-L AMBIENT TEMPERATURE 5 C ... 60 C GRIPPING FORCE PER GRIPPER JAW AT 6 BAR, OPENING 126 N GRIPPING FORCE PER GRIPPER JAW AT 6 BAR, CLOSING 158 N GRIPPING FORCE PER GRIPPER JAW AT 6 BAR, OPENING 63 N GRIPPING FORCE PER GRIPPER JAW AT 6 BAR, CLOSING 79 N MASS MOMENT OF INERTIA 1.4 KGCM2 MAXIMUM FORCE ON GRIPPER JAW FZ, STATIC 500 N MAXIMUM TORQUE ON GRIPPER JAW, MX STATIC 35 NM RELUBRICATION INTERVAL FOR GUIDANCE ELEMENTS 5 MIOCYC PRODUCT WEIGHT 305 G TYPE OF MOUNTING WITH INTERNAL THREAD AND CENTERING SLEEVE VIA THROUGH-HOLE AND CENTERING SLEEVE PNEUMATIC CONNECTION M5 NOTE ON MATERIALS ROHS-COMPLIANT HOUSING MATERIAL WROUGHT ALUMINUM ALLOY, SMOOTH-ANODIZED

ALLEN BRADLEY 700S-CF530EJC SAFETY CONTROL RELAY INDUSTRIAL IEC MECHANICALLY LINKED CONTACTS 5 N.O. 3 N.C. SCREW TERMINALS 24 V DC

(3) FESTO PARALLEL GRIPPERS ASSORTED SIZES - FESTO MODEL HGDSPP16YSRTAB GRIPPER DOUBLE ACTING 4.5 MM STROKE PER JAW 210 DEGREE SWIVEL ANGLE 3-8 BAR WORKING PRESSURE SHOCK ABSORBER AT BOTH ENDS FESTO MODEL HGPT35AB SIZE 35, 8 MM STROKE PER JAW DOUBLE-ACTING, INCLINED PLANE 3-8 BAR OPERATING PRESSURE M5 PNEUMATIC CONNECTION FESTO LOW PROFILE ROBOT GRIPPER MHF2-

FESTO DHTG-90-4A ROTARY TABLE - FESTO DHTG-90-4 ROTARY INDEXING TABLE THEORETICAL TORQUE AT 6 BAR4.4 NM COUNTER-CLOCKWISE/CLOCKWISE, RECIPROCATING CONTROL GENTLE, SINUSOIDAL ACCELERATION CHARACTERISTICS LOCKING TABLE MOTION FINISHED READY TO GO END-POSITION CUSHIONING BY SHOCK ABSORBER DRIVE PISTON FLOW CONTROL WITH FLOW CONTROL VALVE OVERLOAD PROTECTION

(2) FESTO EMMS-AS-55-M-LS-TM AC SYNCHRONOUS 55 MM FLANGE CENTER LENGTH SMOOTH SHAFT LOW VOLTAGE STANDARD TERMINAL BOX ABSOLUTE ENCODER (MULTI-TURN) W/O BRAKE, (1) FESTO EMMS-AS-55-M-LS-TMB AC SYNCHRONOUS 55 MM FLANGE CENTER LENGTH SMOOTH SHAFT LOW VOLTAGE STANDARD TERMINAL BOX ABSOLUTE ENCODER (MULTI-TURN) W/ BRAKE SERVO MOTORS

KURT DX6 CROSSOVER VISE AUTOMATED WITH RAPID DESIGN PNEUMATIC ACTUATOR ALUMINUM SOFT JAWS 6 VISE WITH 9.0 OPENING RAPID DESIGNS AUTOMATED PNEUMATIC VISE ACTUATOR

HEIDENHAIN RON 785 INCREMENTAL ANGLE ENCODER WITH INTEGRAL BEARING & HEIDENHAIN9-15

[22 TON] NIAGRA A-22 OBI PRESS - 22 TON NIAGARA A-22 OBI PRESS (WE CAN LOAD ON YOUR TRUCK) CAP.: 22 TONS MAX. RATED CAP. (ABOVE BOTTOM OF STROKE): 0.03" STROKE: 2.5" SHUT HEIGHT: 8.5" SLIDE ADJ.: 2" BED WIDTH: 20" BED LENGTH: 12" SLIDE AREA: 12" X 10" STROKES PER MIN.: 150 SIZE OF PLATES 21" X 12" X 1.5" THICK (WITH 7.5" X 8.5" HOLE) MAIN MOTOR 2HP AIR BRAKE AIR CUSHION S/N: 51692

FESTO PARALLEL ROBOT GRIPPER HGPT-25-A-B 16MM GRIPPING FORCE PER GRIPPER JAW AT 6 BAR, CLOSING 124 N STROKE PER GRIPPER JAW 6 MM FOR PROXIMITY SENSOR (BY USING PROXIMITY SWITCHES, ANY POSITION CAN BE DETECTED.) SERIES B STURDY AND PRECISE KINEMATICS FOR MAXIMUM TORQUE RESISTANCE AND LONG SERVICE LIFE. THE FORCE GENERATED BY THE LINEAR MOTION IS TRANSLATED INTO THE GRIPPER JAW MOVEMENT VIA A WEDGE MECHANISM WITH FORCE-GUIDED MOTION. THIS ALSO ENSURES THAT THE GRIP PER JAWS MOVE SYNCHRONOUSLY. THE PLAIN-BEARING GUIDE IS VIRTUALLY BACKLASH-FREE THANKS TO THE GROUND-IN GRIPPER JAWS. FLEXIBLE RANGE OF APPLICATIONS: CAN BE USED AS A DOUBLE-ACTING AND SINGLE-ACTING GRIPPER COMPRESSION SPRING FOR SUPPORTING OR RETAINING THE GRIPPING FORCES SUITABLE FOR EXTERNAL AND INTERNAL GRIPPING CENTRING OPTIONALLY VIA CENTRING PINS OR CENTRING SLEEVES

2013 DOALL 2013-V5 HIGH SPEED CONTOUR BAND SAW - 20"H X 13"W CAPACITY RECTANGLE AT 90 13" CAPACITY ROUND AT 90 5,500 FPM MAX BLADE SPEED 26" X 26" TABLE SIZE 154" BLADE LENGTH 1/8"-1" BLADE WIDTHS & GAGE 5 HP BLADE DRIVE MOTOR 13" WORK HEIGHT 39" MATERIAL PASS LINE HEIGHT 20" WHEEL SIZE 45 AND 10 TABLE TILT CONTOUR SAWS 3" UPPER WHEEL ADJUSTMENT 10 3/4" TABLE STROKE 1/2" T-SLOTS 500 POUND TABLE CAPACITY AIR POWER FEED GUIDE BLOCKS CHIP BLOWER WORK LIGHT

DANI SENSE DS 400ID 400A HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) BRAND NEW - DANI SENSE DS 400ID 400A CURRENT TRANSDUCER BRAND NEW 400 A RMS NOMINAL CURRENT 2000:1 PRIMARY/SECONDARY CURRENT RATIO CURRENT OUTPUT THROUGH D-SUB-9 CONNECTOR 27.6 MM APERTURE 10 PPM TOTAL ACCURACY 1 PPM LINEARITY 9 PPM OFFSET STATUS SIGNAL AND LED HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) MEASURING UP TO 600 A CURRENTS AND CONTINUOUSLY MEASURING 600 A CURRENTS WITH A LINEARITY ERROR LESS THAN 1 PPM. BASED ON THE ULTRA STABLE DANISENSE CLOSED LOOP FLUX GATE TECHNOLOGY, THE DS400ID HAS VERY LOW OFFSET AND ULTRA LOW DRIFT. IT PROVIDES HIGH RESOLUTION FOR PRECISE MONITORING, RELIABLE AND CONSISTENT PERFORMANCE, AND A RUGGED DESIGN FOR DURABILITY.

HS-160N 2-ROLL ROLL PRESS 9-7/8" WIDE ROLLS

DANI SENSE DS 400ID 400A HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) BRAND NEW 400 A RMS NOMINAL CURRENT 2000:1 PRIMARY/SECONDARY CURRENT RATIO CURRENT OUTPUT THROUGH D-SUB-9 CONNECTOR 27.6 MM APERTURE 10 PPM TOTAL ACCURACY 1 PPM LINEARITY 9 PPM OFFSET STATUS SIGNAL AND LED HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) MEASURING UP TO 600 A CURRENTS AND CONTINUOUSLY MEASURING 600 A CURRENTS WITH A LINEARITY ERROR LESS THAN 1 PPM. BASED ON THE ULTRA STABLE DANISENSE CLOSED LOOP FLUX GATE TECHNOLOGY, THE DS400ID HAS VERY LOW OFFSET AND ULTRA LOW DRIFT. IT PROVIDES HIGH RESOLUTION FOR PRECISE MONITORING, RELIABLE AND CONSISTENT PERFORMANCE, AND A RUGGED DESIGN FOR DURABILITY.

RAYTEK FLUKE RAYCI1A TEMPERATURE SENSOR INFRARED 32-240F/0-115C WIRED CONNECTION

DANI SENSE DS 200ID 200A HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) BRAND NEW 200A RMS NOMINAL CURRENT 500:1 PRIMARY/SECONDARY CURRENT RATIO CURRENT OUTPUT THROUGH D-SUB-9 CONNECTOR 27.6 MM APERTURE 16 PPM TOTAL ACCURACY 1 PPM LINEARITY 15 PPM OFFSET STATUS SIGNAL AND LED 1 MHZ BANDWIDTH (1 DB) HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) MEASURING UP TO 370 A CURRENTS AND CONTINUOUSLY MEASURING 300 A CURRENTS WITH A LINEARITY ERROR LESS THAN 1 PPM. BASED ON THE ULTRA STABLE DANISENSE CLOSED LOOP FLUX GATE TECHNOLOGY, THE DS200ID HAS VERY LOW OFFSET AND ULTRA LOW DRIFT. IT PROVIDES HIGH RESOLUTION FOR PRECISE MONITORING, RELIABLE AND CONSISTENT PERFORMANCE, AND A RUGGED DESIGN FOR DURABILITY

DANI SENSE DS 200ID 200A HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) BRAND NEW 200A RMS NOMINAL CURRENT 500:1 PRIMARY/SECONDARY CURRENT RATIO CURRENT OUTPUT THROUGH D-SUB-9 CONNECTOR 27.6 MM APERTURE 16 PPM TOTAL ACCURACY 1 PPM LINEARITY 15 PPM OFFSET STATUS SIGNAL AND LED 1 MHZ BANDWIDTH (1 DB) HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) MEASURING UP TO 370 A CURRENTS AND CONTINUOUSLY MEASURING 300 A CURRENTS WITH A LINEARITY ERROR LESS THAN 1 PPM. BASED ON THE ULTRA STABLE DANISENSE CLOSED LOOP FLUX GATE TECHNOLOGY, THE DS200ID HAS VERY LOW OFFSET AND ULTRA LOW DRIFT. IT PROVIDES HIGH RESOLUTION FOR PRECISE MONITORING, RELIABLE AND CONSISTENT PERFORMANCE, AND A RUGGED DESIGN FOR DURABILITY

KEYENCE IL100 LASER SENSOR 75-130 MM RANGE RANGE CLASS 2 REFERENCE DISTANCE:100 MM SPOT DIAMETER (AT STANDARD DISTANCE): APPROX. 400 X 1350 M

[DANI SENSE] DS 400ID 400A HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) BRAND NEW - DANI SENSE DS 400ID 400A CURRENT TRANSDUCER BRAND NEW 400 A RMS NOMINAL CURRENT 2000:1 PRIMARY/SECONDARY CURRENT RATIO CURRENT OUTPUT THROUGH D-SUB-9 CONNECTOR 27.6 MM APERTURE 10 PPM TOTAL ACCURACY 1 PPM LINEARITY 9 PPM OFFSET STATUS SIGNAL AND LED HIGH PRECISION DC CURRENT TRANSDUCER (DCCT) MEASURING UP TO 600 A CURRENTS AND CONTINUOUSLY MEASURING 600 A CURRENTS WITH A LINEARITY ERROR LESS THAN 1 PPM. BASED ON THE ULTRA STABLE DANISENSE CLOSED LOOP FLUX GATE TECHNOLOGY, THE DS400ID HAS VERY LOW OFFSET AND ULTRA LOW DRIFT. IT PROVIDES HIGH RESOLUTION FOR PRECISE MONITORING, RELIABLE AND CONSISTENT PERFORMANCE, AND A RUGGED DESIGN FOR DURABILITY.

AWS-QC 150-POUND TORQUE TESTER TR-QC-150I-1/4 CALIBRATED RANGE 10-100% FULL SCALE, BI-DIRECTIONAL ACCURACY 1% OF INDICATED VALUE (WITHIN CALIBRATED RANGE) RESOLUTION 4 ACTIVE DIGITS OVERLOAD PROTECTION 200% FULL SCALE BI-DIRECTIONAL OPERATING MODES TRACK, PEAK, 1ST PEAK FILTERING SELECTABLE; 125HZ, 250HZ, 500HZ, 1000HZ, 1500HZ AND 2000HZ DATA OUTPUT RS-232 ALARM LIMITS PANEL MOUNTED LED FOR VISUAL ALARM LIMITS OPERATING TEMP 32 - 120 F (0-50 C) CALIBRATION CERTIFICATE INCLUDES NIST TRACEABLE CALIBRATION CERTIFICATE WITH DATA STANDARD ACCESSORIES JOINT SIMULATOR FOR 1/4" DRIVES

KEYENCE SL-R11 SAFETY CONTROL UNIT PNP OPEN COLLECTOR MAX. LOAD CURRENT 500 MA RESPONSE SPEED WHEN E-STOP IS INPUT 20 MS 24VDC

CHICK ONE-LOCK SINGLE STATION VISE

HEINZ KG TYP HK70 HIGH-PRESSURE IMMERSION PUMP BRAND NEW OUR HIGH PRESSURE PUMPS SERIES HK70 ARE SEAL LESS PERIPHERAL PUMPS WITH PUMPING HEAD UP TO 50M AND FLOW RATES UNTIL 80L/MIN. THEY ARE SUITABLE AS SUPPLY PUMPS FOR TOOLING MACHINES OR FILTER SYSTEMS. THE MULTISTAGE VARIANTS WITH A PUMPING HEAD UP TO 450M ARE PREDESTINED FOR APPLICATIONS WITH HIGH FLUID PRESSURED AND SMALLER TO MEDIUM FLOW RATES SUCH AS DEPP DRILLING, TEMPERING UNITS OR TOOLS WITH INTERNAL COOLING. APPLICABLE UNTIL FLUID TEMPERATURE OF 140C OR MODIFIED UP TO 250C VARIANTS WITH RED BRASS AVAILABLE FOR APPLICATIONS WITH WATER