MidMonth MultiFacility CNC Fab No Reserve Auction

KWM PANTHER 6 GUTTER MACHINE CONSTRUCTION 3/8 STEEL FRAME WELDED 8 BOTTOM, 6 TOP, & ROLLERS ARE 10-18 STEEL PLATED INDUSTRIAL HARD-CHROME .002" POWER 3/4 HP REDUCTION GEAR 1 HP MACHINE PLUGS DIRECTLY INTO 110-120V OUTLET PRODUCTION: 35 FPM (APPROX.) ALUMINUM: .032 PAINTED STEEL: 26 GALVANIZED STEEL: 26 COPPER: 16 OZ.34 HARD EQUIPPED WITH: FULLY ENCLOSED WITH 7 GAUGE STEEL SIDES DRIVE/FORMING ROLLERS FOURTEEN DRIVE-FORMING ROLLERS HIGH TORQUE SEALED MOTOR RECOMMENDED MATERIALS MATERIAL MAXIMUM GAUGE NC CONTROL DIMENSIONS: 52 H X 25 W X 127 L WITH STRAIGHT BLADE GUILLOTINE 129 34 L WITH FRONT PULL GUILLOTINE WEIGHT: 1,690 LBS.

1999 KNUDSON 1700K 5 5 GUTTER MACHINE MATERIAL GAUGE STEEL: .018" - .021" MATERIAL GAUGE ALUMINUM: .022" - .032" MATERIAL GAUGE COPPER: 16OZ. TO 20OZ. MATERIAL STRIP WIDTH: 11.75" - 12.0" MACHINE LENGTH: 91.0" MACHINE WIDTH: 21.0" MACHINE HEIGHT: 44.0" MACHINE WEIGHT: 960.0 LBS. STATIONS: 8 POWERED PRODUCTION SPEED: 35 FEET PER MINUTE ELECTRICAL POWER: 115 VOLT AC, 50-60 HZ 20 AMPS, #12 AWG EXTENSION CORD CUTOFF SHEAR: GUILLOTINE MOTOR:1 HP EQUIPPED WITH: REINFORCED STEEL PLATE COVERINGS STEEL FORKLIFT GROOVE ATTACHMENT DOUBLE UPRIGHTS SINGLE GUTTER SPOOL

1992 IPSEN VFC-224 VACUUM FURNACE MAXIMUM TEMPERATURE: 2400F CALIBRATED 2017 REBUILT IN 1992 INTERNAL DIMENSIONS: 24" X 15" X 10"

2006 MITUTOYO QV404 COORDINATE MEASURING MACHINES MEASURING RANGE 7.87" X 7.87" & 15.7" X 15.7" MEASURING ACCURACY OF (1.5+3L/1000)M UP TO 9.8"/S DRIVE SPEED FOR FAST AND EFFICIENT MEASURING CYCLES NEW QVPAK 12.103 SOFTWARE WITH REVOLUTIONARY 3D AUTO TRACE FEATURES CALIBRATED 2022

2011 RAMS 2011 SHEET METAL SLITTER (2020) 16 GA. MAX. MILD STEEL MIN. SLIT WIDTH 3/4" MAX. SLIT WIDTH 24-3/8" APPROX. SPEED 65 FPM 16 GAUGE SLITTER MAXIMUM CUTTING CAPABILITIES MILD STEEL 16 GA .063" GALVANIZED SHEET METAL 16 GA .063" STAINLESS STEEL 18 GA .048" ALUMINUM 14 GA .080" COPPER 14 GA .080" BRASS 14 GA .080" TRUSS PLATES 16 GA .063" PLASTICS 12 GA .109" DIMENSIONS 36" LONG X 28" WIDE X 34" HIGH (CABINET MOUNT) 36" LONG X 28" WIDE X 6" HIGH (TABLETOP) APPROX. WEIGHT 410 LBS (CABINET MOUNT) 375 LBS (TABLETOP)

2000 GERBER SY-100B-AC-210-L 91" WIDE SPREADER 91" WIDE GERBER SPREADER W/ 60' LONG TABLE, MODEL: SY-100B-AC-210-L, BUILT IN 2000 MAX LOADING WEIGHT: 220 LBS. MAX ROLLER DIAMETER: 25.5" 60 HZ EQUIPPED WITH: 60FT LONG TABLE MACHINE WEIGHT: 990 LBS. CAPACITY: 60' L TABLE X 91" WIDE

2007 BIESSE ROVER C 6.50 CONF.3 CNC ROUTER WORKING LENGTH X-AXIS: 183" / 72" WORKING WIDTH Y-AXIS: 60" WORKING HEIGHT Y-AXIS: 5.9" C-AXIS: YES TOOL CHANGER: 10-FACH/ 10-FOLD MAIN SPINDLE: 12 HP CHANGING UNIT: HSK F63 VACUUM PUMP: 145/176 CFM DRILLING HEAD VERTICAL X-AXIS: 8 PIECE DRILLING HEAD VERTICAL Y-AXIS: 6 PIECE DRILLING HEAD HORIZONTAL X-AXIS: 4 PIECE DRILLING HEAD HORIZONTAL Y-AXIS: 4 PIECE SAW UNIT: YES CONTROL: XP600 PC-BASIS SOFTWARE: BIESSEWORKS TOTAL POWER APPROX: 30 HP WORKING SPACE: 21FT WIDE AND 4.9FT DEEP TABLE WITH AUTOMATIC ADJUSTMENT OF THE CUPS DIMENSIONS: HEIGHT: 7.5FT X WIDTH: 20.9FT X DEPTH: 16FT WEIGHT: 8928 LBS.

2008 RETRO SYSTEMS HYPERTHERM SH96-EDP5D THE TABLE WILL FIT A 10FT X 12FT PLATE HPR 260 AMP PRODUCTION CAPACITY: 1-1/4" MAXIMUM PIERCE CAPACITY:1-1/4" MAXIMUM EDGE START CAPACITY:2-1/2"CUT SPEEDS:1/4" @ 260A @ 240 IPM, 1/2" @ 260A @ 145 IPM, 3/4" @ 260A @ 90 IPM, 1" @ 260A @ 65 IPM, 1-1/4" @ 260A @ 45 IPM EQUIPPED WITH: RETRO SYSTEMS PORTABLE CNC CONTROL WET TABLE PHOENIX SOFTWARE TABLE DIMENSIONS WHEN ASSEMBLED: 18.5FT L X 12FT W

2005 KWM PANTHER 6 GUTTER MACHINECONSTRUCTION 3/8 STEEL FRAME WELDED FULLY ENCLOSED WITH 7 GAUGE STEEL SIDES. DRIVE/FORMING ROLLERS FOURTEEN DRIVE FORMING ROLLERS 8 BOTTOM, 6 TOP. ROLLERS ARE 10-18 STEEL PLATED INDUSTRIAL HARD-CHROME: .002" POWER 3/4 HP HIGH TORQUE SEALED MOTOR REDUCTION GEAR: 1 HP MACHINE PLUGS DIRECTLY INTO 110-120V OUTLET PRODUCTION APPROXIMATELY 35 FEET PER MINUTE RECOMMENDED MATERIALS MATERIAL MAXIMUM GAUGE ALUMINUM .032 PAINTED STEEL 26 GALVANIZED STEEL 26 COPPER 16 OZ.34 HARD DIMENSIONS: 52 H X 25 W X 127 L WITH STRAIGHT BLADE GUILLOTINE 129 34 L WITH FRONT PULL GUILLOTINE. WEIGHT: 1,690 LBS.

1999 KNUDSON 1700K 5 5" GUTTER MACHINE MATERIAL GAUGE STEEL: .018" - .021" MATERIAL GAUGE ALUMINUM: .022" - .032" MATERIAL GAUGE COPPER: 16OZ. TO 20OZ. MATERIAL STRIP WIDTH: 11.75" - 12.0" MACHINE LENGTH: 91.0" MACHINE WIDTH: 21.0" MACHINE HEIGHT: 44.0" MACHINE WEIGHT: 960.0 LBS. STATIONS: 8 POWERED PRODUCTION SPEED: 35 FPM ELECTRICAL POWER: 115 VOLT AC, 50-60 HZ 20 AMPS, #12 AWG EXTENSION CORD CUTOFF SHEAR: GUILLOTINE MOTOR:1 HP MOTOR EQUIPPED WITH: DOUBLE UPRIGHTS SINGLE GUTTER SPOOL

2001 VIPER V-950 VERTICAL MACHINING CENTER Y AXIS TRAVEL: 20" X AXIS TRAVEL: 40" Z AXIS TRAVEL: 20" SPINDLE MOTOR: 15 HP SPINDLE SPEED: 8,000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 20 ATC TABLE SIZE: 47" X 18.5" EQUIPPED WITH: FANUC SERIES O-MD CONTROL DIMENSIONS: 112" X 100" X 105" WEIGHT: 12,000 LBS

YANG SML-12 CNC LATHE, 6 CHUCK AND COLLET 1 5/8" MAX, Z-AXIS TRAVEL: 9", SWING: 13", WORKING AREA SWING: 13" MAX. TURNING DIA: 8" MAX. TURNING LENGTH: 8" BED SADDLE ANGLE: 20.47" BED Z-AXIS TRAVEL: 9" Z-AXIS SERVO MOTOR: 1.3HP Z-AXIS RAPID TRAVEL: 1181"/MIN X-AXIS TRAVEL: 9" X-AXIS SERVO MOTOR: 1.3 HP X-AXIS RAPID TRAVERSE: 1181"/MIN SPINDLE 6" BORE/BAR BORE 1.8"/1.26" SPINDLE NOSE: ASA A2-5 6" SPINDLE TAPER: 1/20 AC SPINDLE MOTOR: MITSUBISHI .7/5.5KW (FANUC .5/7.7KW) 6" SPINDLE SPEED: STD 3000RPM, OPT 4500RPM/6000RPM TURRET TYPE: SLIDING GANG TYPE TOOL NO. (STD/OPT): 6PCS RADIAL TOOL POST: 1 PCS AXIAL TOOL POST: 2 PCS DUAL TOOL POST: 1 PCS BORING BAR POST: 2 PCS DRIVE MOTOR COOLANT MOTOR: 1/8 HP HYDRAULIC SYSTEM MOTOR: 1 HP CHIP CONVEYOR MOTOR: 1/4 HP EQUIPPED WITH: 6 CHUCK AND COLLET 1 5/8 MAX FANUC SERIES O-TD CONTROL GENERAL SPECS: BED BASE TO SPINDLE CENTER HEIGHT: 35.4" BED TO SPINDLE CENTER HEIGHT: 10.4" FLOOR SPACE: 78.35" X 47" PACKING SIZE: 89.4X92.52"X76.38" GROSS WEIGHT: 5,000 LBS.

YANG SML-12 CNC LATHE, 6 CHUCK AND COLLET 1 5/8" MAX, Z-AXIS TRAVEL: 9", SWING: 13", WORKING AREA SWING: 13" MAX. TURNING DIA: 8" MAX. TURNING LENGTH: 8" BED SADDLE ANGLE: 20.47" BED Z-AXIS TRAVEL: 9" Z-AXIS SERVO MOTOR: 1.3HP Z-AXIS RAPID TRAVEL: 1181"/MIN X-AXIS TRAVEL: 9" X-AXIS SERVO MOTOR: 1.3 HP X-AXIS RAPID TRAVERSE: 1181"/MIN SPINDLE 6" BORE/BAR BORE 1.8"/1.26" SPINDLE NOSE: ASA A2-5 6" SPINDLE TAPER: 1/20 AC SPINDLE MOTOR: MITSUBISHI .7/5.5KW (FANUC .5/7.7KW) 6" SPINDLE SPEED: STD 3000RPM, OPT 4500RPM/6000RPM TURRET TYPE: SLIDING GANG TYPE TOOL NO. (STD/OPT): 6PCS RADIAL TOOL POST: 1 PCS AXIAL TOOL POST: 2 PCS DUAL TOOL POST: 1 PCS BORING BAR POST: 2 PCS DRIVE MOTOR COOLANT MOTOR: 1/8 HP HYDRAULIC SYSTEM MOTOR: 1 HP CHIP CONVEYOR MOTOR: 1/4 HP EQUIPPED WITH: 6 CHUCK AND COLLET 1 5/8 MAX FANUC SERIES O-TD CONTROL GENERAL SPECS: BED BASE TO SPINDLE CENTER HEIGHT: 35.4" BED TO SPINDLE CENTER HEIGHT: 10.4" FLOOR SPACE: 78.35" X 47" PACKING SIZE: 89.4X92.52"X76.38" GROSS WEIGHT: 5,000 LBS.

2000 SODICK AQ550L WIRE EDM X-AXIS TRAVEL 21.65" Y-AXIS TRAVEL 13.78" Z-AXIS TRAVEL 11.81" TAPER CAPABILITY 20.0 MAX. TAPER HEIGHT 5.9" U-V TRAVELS 5.1" MAX. WORKPIECE DIMENSIONS 29.5" X 19.6" X 12.2" MAX. WORKPIECE WEIGHT 3300LBS EQUIPPED WITH: AUTO WIRE THREADING SUBMERGED BATH LN1W 32 BIT CONTROL RS232 PORT FLOPPY DRIVE CHILLER

NEW BRITAIN 52 AUTOMATIC SCREW MACHINE CAPACITY 1.25" NO. OF SPINDLES 6 IDLE .92 W/ 4" TOOL SLIDE CAM IDLE 1 SEC W/ 5" TOOL SLIDE CAM MAX CAPACITY ROUND: 1 1/4" MAX CAPACITY HEX: 1 1/16" MAX CAPACITY ROUND: 1 1/4" MOTOR HORSEPOWER: 25 MAX STOCK SPEED: 6" MAX DIA HEAD DIAM 4 3/8" SPINDLE SPEEDS: 271 - 4249 RPM TOOL SLIDE TRAVEL 4" TOOL SLIDE TRAVEL OPTIONAL 5" TRAVEL LOW SLIDE FRONT 1 3/4" TRAVEL LOW SLIDE REAR 2" EQUIPPED WITH: COLLETS GEARS CAMS/TOOLING PUSH BUTTON CONTROL NET WEIGHT: 12,900 LBS HEIGHT: 69" LENGTH:127" W/O CONVEYOR WIDTH: 47"

YANG SML-12 CNC LATHE, 6 CHUCK AND COLLET 1 5/8" MAX, Z-AXIS TRAVEL: 9", SWING: 13", WORKING AREA SWING: 13" MAX. TURNING DIA: 8" MAX. TURNING LENGTH: 8" BED SADDLE ANGLE: 20.47" BED Z-AXIS TRAVEL: 9" Z-AXIS SERVO MOTOR: 1.3HP Z-AXIS RAPID TRAVEL: 1181"/MIN X-AXIS TRAVEL: 9" X-AXIS SERVO MOTOR: 1.3 HP X-AXIS RAPID TRAVERSE: 1181"/MIN SPINDLE 6" BORE/BAR BORE 1.8"/1.26" SPINDLE NOSE: ASA A2-5 6" SPINDLE TAPER: 1/20 AC SPINDLE MOTOR: MITSUBISHI .7/5.5KW (FANUC .5/7.7KW) 6" SPINDLE SPEED: STD 3000RPM, OPT 4500RPM/6000RPM TURRET TYPE: SLIDING GANG TYPE TOOL NO. (STD/OPT): 6PCS RADIAL TOOL POST: 1 PCS AXIAL TOOL POST: 2 PCS DUAL TOOL POST: 1 PCS BORING BAR POST: 2 PCS DRIVE MOTOR COOLANT MOTOR: 1/8 HP HYDRAULIC SYSTEM MOTOR: 1 HP CHIP CONVEYOR MOTOR: 1/4 HP GENERAL SPECS: BED BASE TO SPINDLE CENTER HEIGHT: 35.4" BED TO SPINDLE CENTER HEIGHT: 10.4" FLOOR SPACE: 78.35" X 47" PACKING SIZE: 89.4X92.52"X76.38" GROSS WEIGHT: 5,000 LBS. EQUIPPED WITH: 6 CHUCK AND COLLET 1 5/8 MAX FANUC SERIES O-TD CONTROL

GERBER SY-100B-AC-220-L 96" WIDE SPREADER 96" WIDE GERBER SPREADER W/ 60' LONG TABLE FOR THE TEXTILE INDUSTRY, MODEL SY-100B-AC-220-L MAX LOADING WEIGHT: 220 LBS. MAX ROLLER DIAMETER: 25.5" 60 HZ EQUIPPED WITH: 60FT LONG TABLE MACHINE WEIGHT: 990 LBS. CAPACITY: 60' L TABLE X 91" WIDE

NEW BRITAIN 52 AUTOMATIC SCREW MACHINE CAPACITY 1.25" NO. OF SPINDLES 6 IDLE .92 W/ 4" TOOL SLIDE CAM IDLE 1 SEC W/ 5" TOOL SLIDE CAM MAX CAPACITY ROUND: 1 1/4" MAX CAPACITY HEX: 1 1/16" MAX CAPACITY ROUND: 1 1/4" MOTOR HORSEPOWER: 25 MAX STOCK SPEED: 6" MAX DIA HEAD DIAM 4 3/8" SPINDLE SPEEDS: 271 - 4249 RPM TOOL SLIDE TRAVEL 4" TOOL SLIDE TRAVEL OPTIONAL 5" TRAVEL LOW SLIDE FRONT 1 3/4" TRAVEL LOW SLIDE REAR 2" EQUIPPED WITH: TOOLING/NO PICKUP ATTACHMENT PUSH BUTTON CONTROL NET WEIGHT: 12,900 LBS HEIGHT: 69" LENGTH:127" W/O CONVEYOR WIDTH: 47"

NEW BRITAIN 62 AUTOMATIC SCREW MACHINE, CAP: 2 14 , MOTOR HORSEPOWER 15-30 AT 1800 RPM, HEIGHT: 6FT5", LENGTH:12FT 600 VOLTS CAPACITY 2 14 COOLANT CAPACITY 130 GALLONS IDLE 1.52 W/3" TOOL SLIDE CAM IDLE 1.66 W/6" TOOL SLIDE CAM MAX DIE HEAD DIA: 5 1/4" MAX FEED LOWER SLIDES 1.655" MAX STOCK FEED 7 1/2" MAX FEED MID SLIDES 1.504" MAX FEED TOP SLIDES 1.504" MAX TRAV LOWER SLIDES 2 9/16" MAX TRAV MID SLIDES 2 5/16" MAX TRAV TOP SLIDES 2 5/16" MOTOR HORSEPOWER 15-30 AT 1800 RPM SPINDLE SPEEDS 177-2519 STANDARD BEARINGS: BALL TOOL SLIDE TRAVEL 6" HOOK UP 600 VOLTS THREADING ATTACHMENT, DRILLING, FORMING, SHAVING, RECESS. EQUIPPED WITH: CONVEYOR AND TOOLING PUSH BUTTON CONTROL WEIGHT:19,000 LBS HEIGHT: 6FT 5" LENGTH:12FT WIDTH:4FT 8"

NEW BRITAIN 62 AUTOMATIC SCREW MACHINE, CAP: 2 14 , MOTOR HORSEPOWER 15-30 AT 1800 RPM, HEIGHT: 6'5", LENGTH:12FT 600 VOLTS CAPACITY 2 14 COOLANT CAPACITY 130 GALLONS IDLE 1.52 W/3" TOOL SLIDE CAM IDLE 1.66 W/6" TOOL SLIDE CAM MAX DIE HEAD DIA: 5 1/4" MAX FEED LOWER SLIDES 1.655" MAX STOCK FEED 7 1/2" MAX FEED MID SLIDES 1.504" MAX FEED TOP SLIDES 1.504" MAX TRAV LOWER SLIDES 2 9/16" MAX TRAV MID SLIDES 2 5/16" MAX TRAV TOP SLIDES 2 5/16" MOTOR HORSEPOWER 15-30 AT 1800 RPM SPINDLE SPEEDS 177-2519 STANDARD BEARINGS: BALL TOOL SLIDE TRAVEL 6" HOOK UP 600 VOLTS THREADING ATTACHMENT, DRILLING, FORMING, SHAVING, RECESS. EQUIPPED WITH: TOOLING PUSH BUTTON CONTROL WEIGHT:19,000 LBS HEIGHT: 6FT5" LENGTH:12FT WIDTH:4FT8"

SUNNEN MBC-1800D HONING MACHINE POWER STROKING: 0.060 3.75 MANUAL STROKING: 0.060 6.5 STROKE: UP TO 16 SPINDLE SPEEDS: 200 2,500 RPM SPINDLE MOTOR: 1 HP STROKING RATES (5): 80 310 SPM STROKING MOTOR: 1/2 HP HONING OIL CAPACITY: 25 GALS. EQUIPPED WITH: POWER STROKER ADJUSTABLE SPINDLE NOSE VARIETY OF SUNNEN MANDRELS STONES HONING SLEEVES RUNOUT INDICATOR DIMENSIONS: 48(L-R) X 60(F-B) X 62(H) WEIGHT: 1,200 LBS.

VERTEX FASTENERS 3000 WOODWORKING MACHINE TO INSTALL VERSA CLIPS INTO WOODEN FRAME RAILS, CHAIN SPEED: 72FT PER MINUTE, CLIPS PER RAIL: 24 CLIPS MAXIMUM, 1 CLIP MINIMUM POWER: 120 VAC, 50/60 HZ, 1, 15 AMPS (CONTACT VERTEX FASTENERS FOR OTHER POWER OPTIONS) AIR: 80100 PSI, 6 CFM CHAIN SPEED: 72 PER MINUTE RAIL DIMENSIONS: HEIGHT: 5/8 2 1/2 WIDTH: 5/8 9 3/4 LENGTH: 84 MAXIMUM RAIL MEMORY STORAGE SPACE: 5,000 STANDARD/GROUP RAILS 500 ODD RAILS CLIPS PER RAIL: 24 CLIPS MAXIMUM, 1 CLIP MINIMUM CLIPPING SPEED: 3,000-4,000 PER HOUR CLIP DISPENSER CAPACITY: 1,500 VERSA CLIPS MACHINE SIZE: LENGTH: 16FT 6 5/8 WIDTH: FOOTPRINT = 33 WIDE, OVERALL 54" HEIGHT: 72 WEIGHT: 500 LBS

DAEWOO PUMA 400MB CNC LATHE MAX SWING: 30.3" SWING OVER CARRIAGE: 18.9" MAX TURNING DIAMETER: 21.7" MAX TURNING LENGTH: 41.1" X / Z AXIS TRAVEL: 14.3" / 43.5" RAPID TRAVERSE: 630/790 IPM BAR CAPACITY: 4.6" SPINDLE NOSE: A2-11 SPINDLE MOTOR: 50 HP SPINDLE TORQUE: 1836 FT-LBS SPINDLE SPEED: 20-2,000 RPM EQUIPPED WITH: 20" CHUCK, CHIP CONVEYOR, TAILSTOCK, (2) LIVE TOOLS, VDI TOOL HOLDERS INCLUDED, TRANSFORMER FROM 480V-3PH POWER INCLUDED, FANUC 18-T CONTROL,

DAEWOO PUMA 400MB CNC LATHE MAX SWING: 30.3" SWING OVER CARRIAGE: 18.9" MAX TURNING DIAMETER: 21.7" MAX TURNING LENGTH: 41.1" X / Z AXIS TRAVEL: 14.3" / 43.5" RAPID TRAVERSE: 630/790 IPM BAR CAPACITY: 4.6" SPINDLE NOSE: A2-11 SPINDLE MOTOR: 50 HP SPINDLE TORQUE: 1836 FT-LBS SPINDLE SPEED: 20-2,000 RPM EQUIPPED WITH: 20" CHUCK, ROYAL FILTER MIST COLLECTOR, TOOL PRESETTER, CHIP CONVEYOR, TAILSTOCK, (3) LIVE TOOLS, VDI TOOL HOLDERS INCLUDED, TRANSFORMER FROM 480V-3PH POWER INCLUDED, FANUC 18-T CONTROL,