Online Timed Cannabis Hemp Equipment MultiLocation Consignment Auction Powered by A2C

CASCADE SCIENCES CVO-2 VACUUM OVEN SPECS & FEATURES: -TEMPERATURE PROCESSING RANGE: UP TO 220C (428F) -TEMPERATURE UNIFORMITY: +/- 6.5% OF SETPOINT -5 INTERNAL SHELVES. STACK-ABLE AND REMOVABLE -STABLE TEMPERATURE CONTROL. DIGITAL TEMPERATURE READOUT WITH TEMP SENSOR INSIDE THE OVEN W/ DIGITAL VACUUM GAUGE READS IN INCHES OF MERCURY & SIMPLE, SET-POINT CONTROL SMOOTH, QUARTER-TURN VACUUM AND VENT VALVES -REAR KF-25 PORT ALLOWS FOR RAPID MAXEVAP PURGING OR RUNNING FEEDTHROUGHS INSIDE OVEN FOR MONITORING

FELDMEIER 10 L VACUUM TANKS W/ ASSORTED FILTERBAGS. LOT INCLUDES: -FELDMEIER 2.6 GALLON /10 LITER PRESSURE VACUUM TANK -FELDMEIER 10 LITER VACUUM TANK -1 PALLET OF ASSORTED FILTER BAGS, POLYESTER AND STAINLESS STEEL

INFORS HT MULTITRON AJ125 TRIPLE STACK REFRIGERATED CO2 INCUBATOR SHAKER. SPECS & FEATURES: -LARGE CAPACITY FOR PARALLEL PROCESSING -PERFECT WORKING HEIGHT AT 29 CM FOR A SINGLE-STACK UNIT (OPTIONALLY 56 CM WITH HIGH BASE) AND 140 CM FOR A TRIPLE-STACKED SYSTEM ALLOWS USERS TO EASILY ACCESS ALL CABINETS -SMALL OVERALL FOOTPRINT: 1070 MM X 880 MM -MINIMAL VENTILATION GAP CLEARANCE NEEDED, 8 CM ON EACH SIDE

PIKES PEAK PURE PRESSURE PIKES PEAK (PP-PPRP) ROSIN PRESS SPECS & FEATURES: -MAX PRESSURE: 120 PSI -MAX TEMP: 300 DEGREES F -10 X 2.5 HEAT PLATES OUR PREMIUM 6061 ALUMINUM HEAT PLATE ASSEMBLIES OFFER INDEPENDENT THERMOCOUPLES, 0F - 300F EVENLY DISTRIBUTED HEAT, AND TEMPERATURE ACCURACY TO 1 DEGREE.

HOLLAND GREEN SCIENCE PIESI 7 ROSIN PRESS. SPECS & FEATURES: -PRESSURE: 7 TON -TEMP RANGE: 0-250C (32-482 F) -PLATE SIZE: 6 X 12 CM (2.4" X 4.7") W/ PLATE DISTANCE: 40 MM (1.57") -ELECTRICAL: 600 WATTS110V 60HZ

HOLLAND GREEN SCIENCE PIESI 5 ROSIN PRESSES. SPECS & FEATURES: -PRESSURE: 5 TON -TEMP RANGE: 0-250C (32-482 F) -PLATE SIZE: 6 X 12 CM (2.4" X 4.7") W/ PLATE DISTANCE OF 40 MM (1.57") -ELECTRICAL: 600 WATTS110V 60HZ

USA LAB RE-150 ROTARY EVAPORATOR LAB MOTOR LIFT ROTAVAP W/ -30C CHILLER. SPECS & FEATURES: -DESIGNTEMPERATURE [C]: WATER BATH:RT-99C;OIL BATH:RT-180C;0.2C -WORKING PRESSURE[PA]: <399P [3MMHG] -STIRRING SPEED [RPM]: 20-110 VOLUME[L]: 50 -FLASK DIAMETER [MM]: OD125 | FLANGE -INCLUDES USA LABS -30 C 50 LITER CHILLER

20 L SHORT PATH DISTILLATION UNIT W/ (1) JACKETED SOLVENT TANK (4) VAC PUMPS + MORE (1) 20 LITER SHORT PATH DISTILLATION UNIT DUAL-SIDED OUTPUT. DISTILLS ABOUT 1.5 LITERS PER HOUR. 220 VOLT, SINGLE PHASE. - (1) USA LAB ASME JACKETED SOLVENT TANK W/ SIGHT GLASSES, CASTERS & 1.5" TC DRAIN 100LB - (1) 20 LITER GLASS REACTOR, JACKETED. - (1) USA LAB ALUMINUM TANK 100 LITER NON-JACKETED SOLVENT TANK - (1) USA LAB -40 C, 20 LITER CHILLER/RECIRCULATOR (USED WITH THE ROTOEVAPORATOR). 220 V, SINGLE PHASE. - (1) USA LAB -10 C, 5 LITER CHILLER/RECIRCULATOR/HEATER, - (1) VACUUBRAND 4C VACUUM PUMP 110 VOLT - (1) USA LAB UVP-21 CORROSION RESISTANT 2-STAGE VAC PUMP. 21 CFM AT 1.5 MBAR ABILITY. 220 V, SINGLE PHASE. - (2) BRAND NEW VAC PUMPS 5CFM(2.4L/S), 220V, 60HZ - (1) 48 X 6 GLASS CHROMATOGRAPHY COLUMN, NEVER USED. COMES WITH ROLLING BASE MOUNT.

USED DISTILLATION/PROCESSING PACKAGE APPROX 23 FT TALL WIPED FILM EVAPORATOR SYSTEM W/ HAMMER MILL SYSTEM SPECS & FEATURES: -SINGLE-EFFECT CONCENTRATOR THAT IS MAINLY USED FOR CONCENTRATION OF THE LIQUID MATERIALS, ESPECIALLY ADAPTED FOR ETHANOL REDUCTION AND RECOVERY WHERE THE DESIRED PRODUCT IS EITHER CONCENTRATES, RECOVERED ETHANOL, OR BOTH. -THROUGHPUT: 200-250 L PER HOUR -ELECTRICAL: 440 V, 60 HZ, 3 PHASE -SEE PICTURES FOR FULL SPECS -INCLUDES USED SHANDONG HANYU EQUIPMENT CO. LTD HAMMER MILL SYSTEM. SEE INSTRCUTIONS IN PICTURES.INCLUDES PULVERISER, CYCLONE, AND BAG TYPE DUST COLLECTOR

PRECISION STAINLESS 1000 L SS TANK [MAWP: 50 PSIG @ 300 DEGREES F W/ SHELL THICKNESS 187 INCHES -WORKING PRESSURE: 125 PSIG AT 300 DEGREES F. NORTHLAND STAINLESS 800 L SS TANKS -MAWP: FV / 50 PSIG AT 300 DEGREES F -MDMT: 20 DEGREES F @ FV / 50

PRECISION 400L REACTOR TANK 316L SS ON CASTER WHEELSPRECISION STEEL 250L PRESSURE VACUUM TANK ON CASTER WHEELSPRECISION STAINLESS 66 GAL PRESSURE VACUUM TANKDOVER GROEN 100 GAL REACTOR TANKNORTHLAND STAINLESS 600L REACTOR TANK ON CASTERS316 SS REACTOR TANK ON SKID PLATFORM AND CASTER WHEELS316 SS 33GAL 125L PRESSURE VACUUM TANK ON CASTER WHEELS

APEKS TRANSFORMER 2000 PSI SUPERCRITICAL CO2 EXTRACTOR. MODEL "TRANSFORMER" 2000-5X20 SPECS & FEATURES: -2000 PSI MAXIMUM PRESSURE, CLOSED LOOP SYSTEM RECOVERS 95% OF THE CO2, PROCESSES APPROXIMATELY 25-31 POUNDS OF DRIED, GROUND CANNABIS IN A 24 HOUR PERIOD. -160 DEGREES F MAXIMUM TEMPERATURE; HAMMER UNION CLOSURES; SPRING ENERGIZED CUP SEAL MECHANISM; -INTEGRAL FILTERS ON CLOSURE HEADS (20 MICRON); INTERNAL K TYPE THERMOCOUPLE SENSES ACTUAL EXTRACTION TEMPERATURE; NON-ISOLABLE SPRING LOADED SAFETY RELIEF VALVE PREVENTS ACCIDENTAL OVER-PRESSURIZATION. -CO2 RECIRCULATION PUMP; ELECTRIC MOTOR DRIVEN DIAPHRAGM COMPRESSOR; 1.0-2.1 KG/MIN FLOWRATE; HYDRAULICALLY ACTUATED DIAPHRAGM; -CONTROL SYSTEM; FULLY AUTOMATIC PROGRAMMABLE LOGIC CONTROLLER (PLC) TOUCH SCREEN INTERFACE -ELECTRICAL: EXTRACTION UNIT IS 120V 1 PHASE, CHILLER IS 208-230V 1 PHASE, CO2 COMPRESSOR (GREEN) - 460-480V 3 PHASE

USA LAB XTC-20 20L JACKETED STAINLESS STEEL CENTRIFUGE: 304 STAINLESS STEEL BASKET APPROXIMATE 450MM (17.7") DIAMETER X 11" DEEP WITH 1/4" DIAMETER HOLES, 20 LITER VOLUME. MAXIMUM 910 RPM. MAX PLANT LOAD 15 - 20 LBS. INCLUDES CONTROL PANEL WITH ABB DRIVE AND SIEMENS PLC. -USED GONGYI GUOXIN CYCLONE SEPARATOR, MILL, & INCLINE BELT CONVEYOR: SS CYCLONE SEPARATOR W/ BOTTOM ROTARY VALVE, INCLINE RUBBER BELT CONVEYOR. APPROX 12 WIDE X 14 LONG, INCLUDES STAINLESS STEEL DUST COLLECTOR PULSE TYPE & SS HOPPER -USED GONGYI GUOXIN, GX DRYING MILL, MODEL FS-800: POWDER CRUSHING MACHINE. -CONSTRUCTED OF STAINLESS STEEL. -37 KW/ 50 HP. -INCLUDES BLOWER -USED GRINDER. MODEL ZSY280 -USED OIL FREE RECIPROCATING COMPRESSOR. MODEL CW-15/6-65. -USED PARTS MACHINE WIPED FILM DISTILLATION UNIT: SEE PICTURES FOR DETAILS -LOT OF (5) VACUUM FILTER UNITS W/ COLUMNS. (4) MODEL HVF-50. LAST ONE UNKNOWN: -DIAMETER: 485MM -FILTER CUP: 50 L. -EXTRACTION COLUMN, 50 GALLON SS TANK, SS STAIRS WITH DIAMOND PLATE STEPS AND STAND.INCLUDES RECIRCULATOR/CHILLER (PICTURED) & ASSORTED SPARE PARTS -LOT OF ASSORTED ROTARY EVAPORATORS DISASSMBLED. -USED WELCH CRVPRO48 PUMP. MODEL 3487T-01 -USED BVV 1.9 CUFT VACUUM OVEN. MODEL 19ECO -USED ACROSS INTERNATIONAL 35 CUFFT ULTRA LOW FREEZER. MODEL GLACIER 35

AGI DN60 SHORT PATH EVAPORATOR SPECS & FEATURES: -EVAPORATION SURFACE AREA: 0.05 M2 -DESIGN PRESSURE: 0.001 MBAR (ABS.) -UTILIZES INTERNAL CONDENSER: PTFE WIPER: +200 DEGREES C (POLYBENZIMIDAZOLE: +300 DEGREES C) -FEED VESSEL: 1000 ML, VENT VALVE: 10, THERMOMETER POCKET SQG 14/25, 8, 245(L) CAP SQG 29/32, NEEDLE VALVE, NGTV-12L -MAGNETIC SEAL WITH COVER: TORQUE: 1.1 N.M, COVER: SS316 -BOROSILICATE GLASS 3.3 -PTFE WIPER BLADES SPREAD THE FEED ON THE EVAPORATION COLUMN TO FORM A THIN FILM. THE GROOVES OF THE WIPER BLADE ARE ANGLED IN SUCH A WAY THAT, IN ADDITION TO THIN FILM FORMATION OVER THE EVAPORATION SURFACE AREA, IT MOVES THE FILM DOWNWARDS WITH EVERY ROTATION.

APEKS THE FORCE CO2 EXTRACTOR CAN PROCESS 140-200 POUNDS OF DRIED BOTANICAL MATERIAL PER DAY. USED ACROSS INTERNATIONAL 250C 8 CUFT FORCED DRYING OVEN WITH 316L CHAMBER. MODEL FO-19240

UIC KDL5 SHORT PATH DISTILLATION SKID. SPECS & FEATURES: -CAPACITY: 200 - 2,000 GRAMS PER HOUR. -HEATED SURFACE AREA: 0.05 M2 -JULABO HEATING & CIRCULATION SUPPORT UNITS -MAXIMUM EVAPORATOR TEMPERATURE: 350 DEGREES C (662 DEGREES F). -ELECTRIC. 3 - 208 V (3L, N, PE) 60 HZ

PRECISION EXTRACTION X40 MSE MULTI SOLVENT CLOSED LOOP EXTRACTION COLUMNS. SPECS & FEATURES: -PER HOUR PROCESSING BUTANE OR PROPANE: UP TO 36 LB, CAPACITY: UP TO 250 LB, PER 8-HR SHIFT -EXTRACTS: ISOLATE/SAUCE, DISTILLATE, VAPE PENS, SHATTER, WAX/SUGAR, TINCTURE AND EDIBLES -FLEXIBLE SETUP AND ERGONOMICALLY FRIENDLY DESIGN PRECISE CONTROL OVER PRIMARY EXTRACTION -REMOVABLE MATERIAL BASKETS FOR EASY LOAD/UNLOAD -BAFFLED JACKETING ON COLLECTION VESSEL

DELTA SEPARATIONS CUP 30 CONTROL PANEL AND FLUID RESERVOIR ONLY. LOT INCLUDES: - (1) CONTROL PANEL - (1) DELTA BARRIER FLUID RESERVOIR

USA LAB XTC-100 JACKETED SS CENTRIFUGE W/ USA LAB -80 C RECIRCULATING CHILLER. SPECS & FEATURES: -ALLOW USERS TO PERFORM BOTANICAL EXTRACTION WHILE MAINTAINING A CLOSED LOOP SYSTEM, EXPOSING NO SOLVENTS TO THE AIR -MAX PLANT LOAD: 60-100 LBS -BASKET VOLUME: 100 L W/ JACKET VOLUME OF 65 L. -INCLUDES -80 DEGREES C RECIRCULATING CHILLER -ELECTRICAL: 240V 3PH 5.5KW 16A W/ EXPLOSION PROOF MOTOR

USA LAB 50L DUAL SETUP EXPLOSION PROOF ROTARY EVAPORATOR W/ (2) -30 DEGREES C 50L RECIRCULATION CHILLERS & VACUUM PUMP. (2) USA LAB JACKETED SOLVENT TANK 200 LB W/ USA LAB -80 C RECIRCULATING CHILLER. (1) USA LAB LENTICULAR FILTER. USA LAB 100 LB JACKETED SOLVENT TANK W/ STIRRING UNIT ATTACHED & USA LAB 200 C 30 L RECIRCULATING HEATER.

PRECISION STAINLESS EXTRACTION CUSTOM BUTANE SETUP SPECS & FEATURES: -CAPACITY: 200 LB PER 8HR SHIFT -INCLUDES CORKEN T291 PUMP

DELTA SEPARATIONS CUP 30 CONTROL PANEL, COLLECTION VESSEL AND FLUID RESERVOIR. LOT INCLUDES: - (1) CONTROL PANEL - (1) DELTA COLLECTION VESSEL - (1) DELTA BARRIER FLUID RESERVOIR

MOBIUS M108S COMMERCIAL CANNABIS TRIMMER SPECS & FEATURES: -CAPABLE OF 120 LBS/HR OUTPUT -INCLUDES (1) MOBIUS TRIMMER M108S COMMERCIAL CANNABIS TRIMMER, (1) MOBIUS INFEED 6FT CONVEYOR PAC (1) MOBIUS OUTFEED 6FT CONVEYOR PA, (1) MOBIUS HOT SWAP KIT HOT SWAP KIT FOR M108S -ELECTRICAL: 208 VOLT, 3 PHASE

HAL 355P EXTRACTION BOOTH (C1D2) 355 SQFT (28 L X 10 FT W X 9 FT H). SPECS & FEATURES: -INTERIOR SQFT: 355 SQFT -28 L X 9FT H X 10 FT W --UL LISTED AND COMES WITH INSTALLATION MANUAL AND INSTRUCTIONS MANUAL. -EXHAUST FANS, EXHAUST DUCTS, SENSORS FOR ETHANOL AND BUTANE. -UPDATED CONTROL PANEL, ADDED BONUS COMES WITH ODOR MITIGATION PLAN. -ALL MANUALS INCLUDED -COMES WITH 2 LIGHTS FOR INTERIOR C1D1. -ELECTRICAL SUPPLY: ONE 20-AMP 208V CIRCUIT, SINGLE PHASE. CONTROL PANEL FLA = 14.9 AMPS.

HAL 345M EXTRACTION BOOTH SPECS & FEATURES: -INTERIOR SQUARE FOOTAGE: 345 SQFT -ROOM ONLY -INTERIOR DIMENSIONS: 14'3" W X 27'4" L X 9'1.5" TALL -EXTERIOR DIMENSIONS: 14'0" W X 26'3" L X 9'0" TALL -DISSASSEMBLED

ZIEL APEX 7 CANNABIS & HEMP REMEDIATOR. MODEL APEX 7 KW. SPECS & FEATURES: -DECONTAMINATE 150LB OF CANNABIS IN 8 HOURS FOR LESS, CYCLE TIME 20-30 MINUTES -TREATS 0.5 - 2.7 KG/BATCH (1-6 LBS/BATCH, TRIMMED AND MILLED FLOWER -UP TO 6LBS PER CYCLE, 2-3 CYCLES PER HOUR,: 30,000+ LBS PER ANNUM -NON-IONIZING AND COST-EFFECTIVE SOLUTION FOR MICROBIAL PATHOGEN REDUCTION IN CANNABIS & HEMP. UP TO 3 LOG MICROBIAL PATHOGEN REDUCTION TO RETAIN PLANT'S NATURAL ENZYMATIC PROPERTIES. NOMINAL LOSS OF TERPENES AND MOISTURE -OPERATING AT A 27.12 MHZ FREQUENCY LEVEL, POLAR WATER MOLECULES CONTAINED IN THE NATURAL MOISTURE OF THE CANNABIS ROTATE 27 MILLION TIMES PER SECOND, GENERATING FRICTION AND THUS THE HEAT NECESSARY TO KILL MICROBIAL PATHOGENS -ELECTRICAL REQUIREMENTS: 400/480 VAC +/-5%, 3-PHASE + GROUND, 50/60 HZ, 32/38 A CONNECTED LOAD

EFFISON FFE 100L PER HOUR FALLING FILM EVAPORATOR SPECS & FEATURES: -HEAT AREA: 3.5M2 -PREHEATING AREA:3.2M2 -COOLING AREA:6.5M2 -EVAPORATION TEMPERATURE:40-80C -HEAT TRANSFER MODE:PLATE HEAT EXCHANGER 316 -CIRCULATING PUMP:3T-1.5KW -INCLUDES OIL HEATER SINGLE PHASE, 220 VOLT -POWER: 220V, 3 PHASE, 80KW

DELTA SEPARATIONS FFE-45 FALLING FILM ALCOHOL EVAPORATION SYSTEM. SPECS & FEATURES: -OPERATIONAL TEMPERATURE: 50C = DEGREES C TO 60 DEGREES C. REMOVAL EFFICIENCY: 85% - 95%. -OUTPUT: 35 GAL / HR -SPEED OF RECOVERY: 45-55 GPH.SEPARATION EFFICIENCY OF 90-95%. -OPERATIONAL EVAPORATION TEMPERATURE RANGE OF 50 DEGREES C TO 85 DEGREES C. 240 VOLT THREE-PHASE. -INCLUDES HEATER & CHILLER

LANPHAN PP-60 CENTRIFUGE SPECS & FEATURES: -PROCESS 20 - 25 LBS PLANT MATERIAL PER RUN -ALSO INCLUDED: 12 EXTRACTION BAGS & 2 REPLACEMENT BELTS -ELECTRICAL: 220 VOLT, SINGLE PHASE

USED TWISTER BATCH ONE DRY TRIMMER. MODEL BATCH ONE. SPECS & FEATURES: -THROUGHPUT OF 88 LBS/HR DRY W/ QUICK RELEASE TUMBLER. -BUILT SPECIFICALLY FOR CULTIVATORS WHO PREFER DRY TRIMMING AND A BATCH-STYLE WORKFLOW. -63" LENGTH X 32" WIDTH X 48" HEIGHT. UL & CSA COMPLIANT.

CANNAQUIP RX-W-1421021-0.2 14 HEAD BATCH WEIGHING COMBINATION SCALE SYSTEM SPECS & FEATURES: -14 HEAD -WEIGHING MAX CAPACITY: 200 GRAMS -WEIGHING RANGE OF SINGLE BUCKET: 1-200 G -VOLUME OF EACH BUCKET: 200 ML -MAX WEIGHING SPEED: 120 PPM -FOR WEIGHING GRANULAR AND IRREGUALR SHAPED PRODUCTS INLCUDING CANNABIS FLOWER -OVERALL DIMENSIONS: 1100 MM X 1000 MM X 1200 MM -POWER SUPPLY: AC 110/220 V, 50/60 HZ, 6A, 1.5 KW

ARTYPAC 75H HORIZONTAL FLOW WRAPPER MACHINESPECS & FEATURES: -SPEED (CYCLES PER MINUTE): 100CPM -POSSIBLE BAG SIZES WIDTH: 1" TO 8" LENGTH: 1.75" TO 24" -ENERGY CONSUMPTION 208/230V, 20A, SINGLE PHASE -FULLY AUTOMATED & HIGH SPEED -REQUIRES NO ADVANCED TECHNICAL SKILLS. PRODUCT-CONTACT COMPONENTS CAN BE EASILY REMOVED FOR CLEANING WITHOUT TOOLS.

PACK LEADER PL-501 & PL-221 LABELING SYSTEM: PACK LEADER FULLY AUTOMATIC WRAP AROUND LABELING MACHINE. MODEL PL-501 -APPLIES PRESSURE-SENSITIVE LABELS TO ROUND CONTAINERS. -MAXIMUM DISPENSING SPEED: 131.2/MIN (40M/MIN) -MAXIMUM CONVEYOR SPEED: 72.2/MIN (22M/MIN) -MAXIMUM LABEL SIZE: 6 X 11.8 (H 152MM X L 300MM) -MAXIMUM CONTAINER WIDTH: 4 (101MM) -EASILY ADJUST THE SETTINGS TO APPLY LABELS TO ONE SIDE OF FLAT-SURFACED CONTAINERS W/ TOUCH SCREEN CONTROLS . -INCLUDES VIDEOJET THERMAL PRINTER & BRACKET. MODEL 6330 -INCLUDES STRAIGHT SHOOTER FEEDER & STAND -VOLTAGE: 110/220 VAC 50/60 HZ 1 PHASE POWER IN KW: .760 PACK LEADER TOP AND BOTTOM LABELING MACHINE. MODEL PL-221 -MAX SPEED 40M/MINUTE DISPENSING MAX SPEED: 40M/MINUTE -SPEED CONTROL: 8 SPEEDS CONVEYOR -CONVEYOR WIDTH 180 MM -LABELING HEAD DRIVER STEPPING MOTOR DRIVE -DUAL-HEAD DESIGN MAKES THIS MACHINE AN EXCEPTIONAL CHOICE FOR SIMPLIFYING TOP AND BOTTOM LABELING JOBS. WITH BOTH LABELING HEADS WORKING SIMULTANEOUSLY, YOU CAN LABEL YOUR PRODUCT IN A SINGLE PASS. -VOLTAGE: 110 / 220 VAC FREQUENCY: 50 HZ / 60 HZ PHASE: SINGLE POWER CONSUMPTION: 700 VA

PRIMERA LX2000 COLOR LABEL PRINTER -PRINT SPEEDS UP TO 6" PER SECOND ON LABELS UP TO 8" WIDE -BUILT-IN CUTTER USED STOVER THERMAL LABEL PRINTER. MODEL SM4.25 -EASY TO LOAD, USE AND INTEGRATE. SUPERIOR PRINT QUALITY, AUTO-LOAD CAPABILITIES, UNPARALLELED PRINT REGISTRATION, A ZERO LABEL WASTE AUTO-LOADING DESIGN. -QUALITY WAX/RESIN RIBBONS ARE FORMULATED TO PRINT ON A VARIETY OF SURFACES INCLUDING HARD PLASTIC PLANT STAKES, FLEXIBLE POLY HANG TAGS & SYNTHETIC ADHESIVE & SIGN STOCKS USED PRO PACK BLISTER / TRAY HEAT SEALING MACHINE. MODEL B9X12 -BALANCED HEATING PLATEN & SELF ALIGNING PRESSURE SYSTEM W/ FULLY ENCLOSED SEALING CHAMBER & FULLY ADJUSTABLE THERMOSTAT -1800 LBS. SEALING FORCE W/ ADJUSTABLE PRESSURE REGULATOR & ELECTRONIC TIMING SYSTEM

FUTUROLA KNOCKBOX 100 AUTOMATED FILLING SYSTEM SPECS & FEATURES: -FILLING CYCLES OF 60 OR 90 SECONDS -COMPATIBLE WITH STANDARD FUTUROLA PRE-ROLLED CONES*: 1 1/4 SIZE 84/26 PRE-ROLLED CONES SLIM SIZE 98/26 PRE-ROLLED CONES KING SIZE 109/21 + 109/26 PRE-ROLLED CONES -AUTOMATED FILLING SYSTEM DESIGNED TO REVOLUTIONIZE YOUR ROLLING EXPERIENCE. COMBINES PRECISION ENGINEERING, EFFICIENCY, AND CONVENIENCE, ALLOWING YOU TO EFFORTLESSLY FILL A LARGE QUANTITY OF PRE-ROLLED CONES IN A FRACTION OF THE TIME. -INCLUDES CONTROLLER POWER ADAPTER

THOMPSON DUKE MCF1 SEMI-AUTOMATIC CARTRIDGE FILLER SPECS & FEATURES: -ADJUST THE DISPENSE VOLUME PRECISELY UP TO 1.1 ML. FILL EVERY TYPE OF CARTRIDGE AND POD AS WELL AS CAPSULES, SYRINGES AND JARS. -REFILL THE GLASS 140ML HEATED OIL RESERVOIR DURING OPERATION. -DESIGNED TO FILL ANY OIL VAPORIZER DEVICE AVAILABLE ON THE MARKET. -INCLUDES AIR COMPRESSOR & ASSORTED SYRINGES

THOMPSON DUKE MCF1 SEMI-AUTOMATIC CARTRIDGE FILLER. SPECS & FEATURES: -ADJUST THE DISPENSE VOLUME PRECISELY UP TO 1.1 ML. FILL EVERY TYPE OF CARTRIDGE AND POD AS WELL AS CAPSULES, SYRINGES AND JARS. -REFILL THE GLASS 140ML HEATED OIL RESERVOIR DURING OPERATION. -DESIGNED TO FILL ANY OIL VAPORIZER DEVICE AVAILABLE ON THE MARKET.

USED OIL CARTRIDGE FILLING MACHINE. MODEL JW012 SPECS & FEATURES: -DESIGNED TO MAKE YOUR LIFE EASIER BY QUICKLY AND EFFICIENTLY FILLING YOUR CARTS WITH OIL -INCLUDES (3) TRAYS OF EACH SIZE -COMES WITH A USER MANUAL

HEPHESTUS AURA 200 FULLY AUTOMATIC PRE-ROLL MACHINE SPECS & FEATURES: -UP TO 2000 PRE-ROLLS PER HOUR -FITS ALL POPULAR CONES -WEIGHT ACCURACY & HOMOGENEOUS COMPRESSION -FULLY AUTOMATIC, SINGLE OPERATOR INDUSTRIAL CAPACITY MACHINE. -COMPACT FOOTPRINT AND EASY OPERATION AND PRODUCTION FLEXIBILITY, MADE TO FIT YOUR CHOICE OF CONES -CE MARKING STANDARD WITH UL SAFETY CERTIFICATION

LOM SEMI-AUTOMATIC LARGE GUMMY DEPOSITOR SPECS & FEATURES: -CAPABLE OF MAKING 5000 PIECES OR MORE OF GUMMIES OR CANDY PER HOUR. -FOR THE PURPOSE OF MAKING CBD/THC GUMMIES -MAKE ALL TYPES OF GUMMY CANDY AND CANDY. -INCLUDES A DEPOSTIOR FOR CANDY OR GUMMIES, AN EXTRACTOR TO GET THE CANDY OUT OF THE MOLDS -PLC IS A FATEK B1Z-24MR25-D24

ATG AC-T100 PHARMA TABLE-TOP SEMI-AUTOMATIC CAPPER SPECS & FEATURES: -CAP SIZE RANGE (MM) 20 - 110-CHUCK-HEAD IS INTERCHANGEABLE FOR DIFFERENT CAP TYPES -FOR TWISTING AND TORQUING CAPS ONTO ROUND BOTTLES AND TINCTURES. -SPEED (RPM): 15 RPM WEIGHT (KG) 18.1 WIDTH (MM) 330 HEIGHT (MM) 802 DEPTH (MM) 270 -ADJUSTABLE HEIGHT/TORQUING ABILITIES MAKE THIS A VALUABLE MACHINE ACROSS A WIDE VARIETY OF DIFFERENT INDUSTRIES AND APPLICATIONS. -ELECTRICAL: 110 V, 2A, 60 HZ SINGLE PHASE

AUTOMATED PRE-ROLL FILL & TWIST MACHINE. MODEL PRFT SPECS & FEATURES: -THE PRFT CAN FILL, PACK, TWIST, AND OFFLOAD ROUGHLY 650 1G JOINTS PER HOUR OR UP TO 1000 1/2G JOINTS PER HOUR, WHILE MAINTAINING THAT SIGNATURE GANJAGOLD QUALITY. -WITH ONLY TWO OPERATORS NEEDED -RUNS FULLY ON ELECTRICITY AND COMPRESSED AIR TO PERFORM ALL NECESSARY STEPS, AND HAS A BUILT-IN HUMAN-MACHINE INTERFACE (HMI) THAT ALLOWS OPERATORS TO PERFORM TEST RUNS, TROUBLESHOOT ISSUES, ACCURATELY COUNT FINISHED UNITS AND MAKE PRECISE ADJUSTMENTS WHEN NEEDED.T -WHEN A SUCCESSFUL JOINT HAS BEEN FILLED BY GIVING IT A GREEN LIGHT, AND ADDING IT TO THE COUNTER. IF THE MACHINE RECOGNIZES THAT A JOINT HAS BEEN FILLED IMPROPERLY, IT WILL INDICATE THAT WITH A RED LIGHT, AND WILL NOT ADD IT TO THE COUNTER, IN ORDER TO MAINTAIN ACCURACY IN THE NUMBER OF SUCCESSFUL COMPLETED UNITS. -BY SUPPLYING THE MACHINE WITH GROUND CANNABIS MATERIAL AND PRE-ROLLED CONES, THE MACHINE WILL AUTOMATICALLY AND CONTINUOUSLY FILL, SPIN, TWIST, AND OFFLOAD JOINTS. THE MACHINE IS BUILT ON A ROUND-ABOUT STYLE CONVEYOR SYSTEM, POWERED BY NUMEROUS SENSORS THAT TELL EACH STEP OF THE MACHINE WHEN AND WHAT TO DO. OPERATORS HAVE FULL CONTROL OF WHAT STEPS THE MACHINE WILL PERFORM, HOW FAST IT WILL HAPPEN, DESIRED SPECS OF THE JOINT, QUALITY CHECKS AND MORE. -FILLED TWO AT A TIME, USING A VOLUMETRIC WEIGHING SYSTEM BASED ON THE MATERIALS DENSITY TO PRECISELY FILL JOINTS TO THE DESIRED WEIGHT (WITH AN ACCEPTABLE STANDARD DEVIATION RANGE) AND CAN EASILY BE CHANGED IN ORDER TO CREATE ALMOST ANY SIZED JOINT. -FILLED JOINTS ARE THEN AUTOMATICALLY LOADED ONTO A CENTRIFUGE THAT SPINS THE JOINTS TO PROVIDE FOR AN EVEN AND FIRM PACK. THE CENTRIFUGE HAS BOTH A TIME AND RPM ADJUSTMENT TO MEET THE DESIRED JOINT STRENGTH, DEPENDING ON THE QUALITY OF THE INPUT MATERIAL THAT IS BEING USED, AND CAN EASILY BE ADJUSTED ON THE HMI SCREEN. -AFTER THE JOINTS ARE SPUN, THEY WILL BE TAMPED WITH COILED RODS IN ORDER TO ACCOUNT FOR VARIANCE IN THE AMOUNT OF CANNABIS THAT WAS FILLED INTO EACH JOINT. THEN, A PRECISION TWIST MECHANISM IS USED TO CLOSE UP EACH JOINT BEFORE BEING OFFLOADED TO AN OPERATOR WHO WILL RECEIVE THE JOINTS ON THE OUTSIDE OF THE MACHINE, AND PROVIDE ANY TOUCH-UPS THAT ARE NEEDED. -MANUAL & MANY ADDITIONAL DOCUMENTS AVAILABLE UPON REQUEST

CONVECTIUM 710 SHARK OIL FILLING MACHINE. MODEL 710 SHARK W/ CAPPER. SPECS & FEATURES: -UP TO 100 CARTRIDGE OR DISPOSABLE FILLS IN LESS THAN 60 SECONDS. DUAL HEATED INJECTION SYSTEM FOR THE THICKEST OF OILS - TEMPS UP TO 125 DEGREE C. -MULTI-HEAD. SPEED X & Y/Z (MM/SEC): 0.1~800/ 500. EXTERIOR DIMENSION 580MM*520MM*490MM. LOAD Y/Z AIXS 5 KG/ 3KG. -4-IN-1 FILLING: PLASTIC, CERAMIC, AND STAINLESS CARTRIDGES OR DISPOSABLES. -FILL RANGE: 0.1ML (100 MG) - 3ML (3 G) PER CARTRIDGE (X100).

CHEMTECH INTERNATIONAL 600208 SOFT GEL CAPSULE DRYING TRAYS (2000) SPECS & FEATURES: -DIMENISONS OF A SINGLE TRAY: 23.875 INCHES LONG (606 MM) X 14.9375 INCHES (379 MM) WIDE X 1.375 INCHES DEEP (35 MM) -COMPOSITE CONSTRUCTION OF MFG GEL CAPSULE DRYING TRAYS ALLOWS FOR EASY STACKING UNDER HEAVY LOADS WITHOUT DISTORTING AND WARPING -DESIGNED FOR DRYING AND CURING OF SOFT GELS -MADE FROM A PROPRIETARY FIBERGLASS BLEND, MAKING OUR TRAYS STRONGER AND MORE DURABLE FOR MAXIMUM PERFORMANCE AND VALUE.

20 CDR-20 GLASS FILTER REACTOR SYSTEM SPECS & FEATURES: -DOUBLE WALL VESSEL W/ FULL JACKET/FULL VACUUM TO ATMOSPHERIC PRESSURE -OPERATING JACKET PRESSURE: UP TO +0.5 BAR G (+0.05 MPA) -OPERATING TEMPERATURE: -90C TO +200C (A3T:110C) -LOT INCLUDES GLASS CARBOY WITH GLASS VACUUM CONNECTIONS INTEGRATED ON MOBILE CART FOR EASY CAKE (ISOLATE) REMOVAL -SPRAY BALL(S) INSIDE REACTOR WITH VALVE CONTROL PROVIDE EASY, UNIFORM WASHES AND SYSTEM CLEANING -PTFE FILTER ASSEMBLY HAS DOUBLE SEAL FOR MAXIMUM VACUUM INTEGRITY & SAFETY OVERPRESSURE PROTECTION POPPET VALVE

CASCADE SCIENCES 20 L REACTOR SPECS & FEATURES: -20 L CAPACITY -OPERATING PRESSURE: FULL VACUUM UP TO 0.5 BAR G -OPERATING TEMPERATURE: -90C TO 200C (T:110C) -ULTIMATE PRESSURE: 2 X 10-2 TORR -MAX REACTOR PRESSURE: 0.5 BAR @ 7 PSI -ALL ASSOCATED GLASSWARE & CONDENSER INCLUDED

CASCADE SCIENCES 100 L REACTOR 100 L JACKETED REACTOR SYSTEM. SPECS & FEATURES: -100 L CAPACITY -STAINLESS STEEL M30X1.5 JACKET CONNECTIONS -REMOVABLE PTFE FLUSH MOUNT DRAIN VALVE WITH 1IN BP DRAIN PORT -JACKETED REACTOR WITH 300MM FLAT FLANGE -COVER, 300MM, 6 NECK, 2IN BP CENTER NECK, (3) 1 1/2IN BP, 3IN BP & 2IN BP ON 45 DEGREE ANGLE SIDE NECKS -1 3/16IN GLASS STIRRER SHAFT WITH PTFE AGITATOR - 1 3/16IN 2IN BP PTFE BEARING -2IN BP X 21IN COIL CONDENSER -1 1/2IN BP X 35IN LONG THERMOWELL WITH FEED -(2) 1 1/2IN BP, (1) 3IN BP END CAPS FOR OPEN PORTS --STAINLESS STEEL TUBULAR WELDED FRAME ON SWIVEL LOCKING CASTERS -ELECTRICAL: 1/4HP 230VAC 3PH TENV AC INVERTER DUTY MOTOR - 5:1 GEARBOX, 0 TO 300 RPM OUTPUT. INCLUDES AC INVERTER, NEMA 4X, 115 TO 230VAC 1PH 60HZ INPUT VOLTAGE

RADLEYS REACTOR-READY PILOT LAB 20L JACKETED REACTOR W/ HEI-TORQUE 200 OVERHEAD STIRRER SPECS & FEATURES: -20 LITER CAPACITY -VESSELS FEATURE V4 ZERO DEAD SPACE DRAIN STOPCOCK WHICH PREVENTS OVER-TIGHTENING WHICH CAN CAUSE GLASS BREAKAGE -INCLUDES DN200 7 NECK LID -INCLUDES HEIDOLPH HEI-TORQUE 200 OVERHEAD STIRRER -CORROSION-RESISTANT STAINLESS STEEL, ANODISED ALUMINIUM OR POWDER-COATED STEEL, PRECISION ENGINEERED BOROSILICATE GLASS

CASCADE SCIENCES 50 L FILTER REACTOR PACKAGES. MODEL 50 L REACTOR SPECS & FEATURES: -50 L CAPACITY -OPERATING PRESSURE: FULL VACUUM UP TO 0.5 BAR G -OPERATING TEMPERATURE: -90C TO 200C (T:110C) -ULTIMATE PRESSURE: 10 X 10-3 TORR -ALL SUPPORTING GLASSWARE & CONDENSER INCLUDED

SAVAGE BROS COMPACT TRUFFLY MADE MANUAL GUMMY DEPOSITOR W/ TABLE TOP COOKER SPECS & FEATURES: -USED FOR MANUAL, METERED DEPOSITS OF CANNABIS CHOCOLATE, CARAMEL, GUMMY AND HARD CANDY INTO MOLDS. -MAX OPERATING TEMPERATURE: 320F/160C -8 PISTON ASSEMBLY W/ -COMPLETE HEATING SYSTEM HEAVY DUTY NOZZLES STAINLESS STEEL -DIGITALLY CONTROLLED, HEATED HOPPER, ALLOWS YOU TO WORK WITH HIGHER TEMPERATURE SETTINGS AND FILL 6 TO 8 MOLD CAVITIES AT ONCE, ALLOWING INCREASED PRODUCTIVITY. -INCLUDES TABLE TOP COOKER: -INCLUDES XL HOPPER WITH COVER STAINLESS STEEL BALLS