Equipment Hub Inhouse Metalworking Machinery and Tooling Auction
Category: CNC MACHINE CENTERS
Total Lots:
151
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
SCHWARZE-WIRTZ | CNC 80 DB 3.25 |
SCHWARZE-WIRTZ CNC 80 DB 3.25 TUBE BENDER W/ BENDPRO CONTROLLER, AUTOMATION AND TOOLING. MAXIMUM TUBE DIAMETER: 80 MM (3.15"), MAXIMUM DEGREE OF BEND: 180 DEGREES + SPRING BACK, BENDING ROTATION: LEFT HAND BENDPRO CNC CONTROLLER, AUTOMATION FOR AUTOMATIC LOADING, ROTARY DRAW BENDING, AUTOMATIC LUBRICATION, HUGE VARIETY OF TOOLING
|
🔒 Subscribe | |
|
|
ESAB | 70TA |
70 TON ESAB SELF ALIGNING TURNING ROLLS. MODEL: 70TA, 140,000 LBS LOAD CAPACITY (SET), 210,000 LBS LOAD (WITH ADDITIONAL IDLER), SET INCLUDES 1 DRIVE AND 1 IDLER, PIPE DIAMETER RANGE @ 75% LOAD: 39.4" - 204.7", PIPE DIAMETER RANGE @ 100% LOAD: 68.9" - 204.7", VARIABLE SPEED ROTATION FROM 2.4" TO 49.2" IPM, (2) 1 _ HP MOTOR HORSEPOWER RATING, 17.3_ WHEEL DIAMETER, 12-3/4_ COMBINED WHEEL FACE, INPUT POWER: 480 VOLT, 3 PHASE, REMOTE HAND PENDANT CONTROL, S/N: C10788, SHIPPING WEIGHT: 11,000 LBS.
|
🔒 Subscribe | |
|
|
GENIE | GS-2032 |
GENIE GS-2032 20 ELECTRIC SCISSOR LIFT, NEW BATTERIES / CHARGER, MANLIFT, AERIAL PLATFORM . BATTERY VOLTAGE: 24DC, PLATFORM HEIGHT: 20 FT., WIDTH: 32", WEIGHT CAPACITY: 800 LBS., DRIVE MOTOR SYSTEM: HYDRAULIC, TIRE SIZE: 15" X 5" X 11.25", DRIVE TYPE: FRONT, HYDRAULIC FLUID CAPACITY: 4.5 GALLON, HP: 8 APPROX. SHIPPING WEIGHT: 4,000 LBS., APPROX. SHIPPING DIMENSIONS: 8' L X 3' W X 7' H
|
🔒 Subscribe | |
|
|
OCEAN / RUSH | REJUVENATOR 2 |
OCEAN / RUSH REJUVENATOR 2 CAPACITY DRILL SHARPENER / GRINDER. CAPACITY: 3/32" TO 2" DRILL DIAMETER, ELECTRICAL: 115V/1PH 6-1/2" 6 JAW SELF CENTERING CHUCK, COOLANT SYSTEM, WORK LIGHT, CABINET BASE
|
🔒 Subscribe | |
|
|
BRIDGEPORT | TORQ-CUT 30 |
BRIDGEPORT TORQ-CUT 30 CNC 3-AXIS VERTICAL MACHINING CENTER. TABLE SIZE: 36" X 14", X-AXIS TRAVEL: 30", Y-AXIS TRAVEL: 16", Z-AXIS TRAVEL: 20", SPINDLE SPEED: 6000 RPM, TOOL CAPACITY: 22 ATC, SPINDLE TAPER: BT-40, MAIN MOTOR DRIVE: 7.5HP, ELECTRICAL: 240V/3PH. EQUIPPED WITH BRIDGEPORT DX-32 CNC CONTROL, COOLANT SYSTEM, KURT VISE. APPROX. SHIPPING WEIGHT: 10,000 LBS., APPROX. SHIPPING DIMENSIONS: 112" L X 102" W X 100" H.
|
🔒 Subscribe | |
|
|
SAF | 4' |
SAF 4' SEAM WELDER. 54" TOTAL WELDING AND CLAMPING LENGTH CAPACITY, RATED AT 48", 8" MINIMUM PART DIAMETER, 42" MAXIMUM PART DIAMETER, RACK AND PINION DRIVEN VARIABLE SPEED WELD CARRIAGE, RETRACTABLE PLATE ALIGNMENT DEVICE, STEEL FINGERS WITH ALUMINUM TIPS, GAS PURGED COPPER BACK-UP BAR, WATER COOLED MANDREL, 2" MANUAL HORIZONTAL AND 5" VERTICAL TORCH ADJUSTMENT SLIDES, 1-1/2" VERTICAL ADJUSTMENT, SAF CONTROLS, CABLE RAIL ON BACK OF SEAMER TO SUSPEND CABLES ABOVE THE FLOOR, 230 VOLT - 3 PHASE INPUT POWER, SERIAL #899
|
🔒 Subscribe | |
|
|
APPLIED GRINDING TECHNOLOGIES | CNC FORM WHEEL DRESSING MACHINE |
APPLIED GRINDING TECHNOLOGIES CNC FORM WHEEL DRESSING MACHINE WITH AGT CNC CONTROLLER. MAXIMUM WHEEL DIAMETER: 8, WHEEL DRIVE HP: 0.5, WHEEL DRIVE RPM: 1800, DIAMOND WHEEL DRESSER HP: 0.75, DIAMOND WHEEL DRESSER RPM: 3600, ELECTRICAL: 230V/3PH. APPROX. SHIPPING WEIGHT: 2,000 LBS., APPROX. SHIPPING DIMENSIONS: 68 L X 68 W X 78 H.
|
🔒 Subscribe | |
|
|
MOTOMAN | HP50N-AOO |
MOTOMAN HP50N-AOO 6 AXIS ROBOT W/ NX100 CONTROLLER, ACT ROBOTIC FINISHING CELL. NUMBER OF AXES: 6, PAYLOAD: 50 KG (110.3 LBS), H-REACH: 2046 MM (80.6 IN), REPEATABILITY: 0.07MM (.003 IN), ROBOT MASS: 500 KG (1102 LBS), STRUCTURE: VERTICIAL JOINT ARM, MOUNTING: FLOOR, S-AXIS MOTION RANGE: 180, L-AXIS MOTION RANGE: 135, U-AXIS MOTION RANGE: 280, R-AXIS MOTION RANGE: 360, B-AXIS MOTION RANGE: 125, T-AXIS MOTION RANGE: 360, ELECTRICAL: 460V/3PH NX100 CONTROLLER, APPLIED CONTROLS TECHNOLOGY INTEGRATED ROBOTIC SOLUTIONS SYSTEM, PENDANT APPROX. SHIPPING WEIGHT: 2,500 LBS., APPROX. SHIPPING DIMENSIONS: 9' L X 5' W X 8' H
|
🔒 Subscribe | |
|
|
BRIDGEPORT | J-HEAD 9 X 42 |
BRIDGEPORT J-HEAD 9 X 42 VERTICAL MILLING MACHINE W/ ACU-RITE DRO, SERVO POWER FEED. TABLE SIZE: 9" X 42", LONGITUDINAL TRAVEL (X-AXIS): 30", CROSS TRAVEL (Y-AXIS): 12", KNEE VERTICAL TRAVEL (Z-AXIS): 16", SPINDLE QUILL TRAVEL: 5", SPINDLE TAPER: R8, SPINDLE SPEEDS (8): 80/135/210/325/660/1115/1750/2720, POWER QUILL FEED (3): .0015/.003/.006 IPR, MOTOR HP: 1, ELECTRICAL: 240/480V(WIRED 480)/3PH ACU-RITE 2-AXIS DIGITAL READOUT, BRIDGEPORT 6" VISE, SERVO 140 POWER FEED, (2) LIGHTS
|
🔒 Subscribe | |
|
|
BIRMINGHAM | YCL-1340 |
BIRMINGHAM YCL-1340 13 X 40 TOOL ROOM GEARED HEAD LATHE W/ DRO. SWING OVER BED: 13", DISTANCE BETWEEN CENTERS: 40", SWING OVER CROSS SLIDE: 8", SWING OVER GAP: 18-3/4", SPINDLE THRU HOLE: 1-1/2", SPINDLE NOSE: D1-4, SPINDLE SPEEDS (8 SPEEDS): 70 TO 2000 RPM, METRIC THREADS: 0.25 - 11, INCH THREADS: 4 - 112 TPI, MOTOR HP: 2, ELECTRICAL: 220V/1PH FAGOR 2-AXIS DIGITAL READOUT, 6" BUCK CHUCK, TOOL POST APPROX. SHIPPING WEIGHT: 1,500 LBS., APPROX. SHIPPING DIMENSIONS: 80" L X 48" W X 68" H
|
🔒 Subscribe | |
|
|
PH |
16800 LB PH USED WELDING POSITIONER. 16,800 LB. CAPACITY AT 12" CENTER OF GRAVITY, 135 DEGREE POWER TILT, MECHANICAL VARIABLE SPEED ROTATION FROM .006 TO .6 RPM, POWERED ELEVATION FROM 78" TO 119" WITH TABLE HORIZONTAL, 7' X 7' SLOTTED SQUARE TABLE, PENDANT CONTROLS FOR TILT AND ELEVATION, PENDANT AND FOOT PEDAL FOR ROTATION CONTROL, 460 VOLT - 3 PHASE, SHIPPING WEIGHT 14,000 LBS., SERIAL #1150
|
🔒 Subscribe | ||
|
|
BRANTFORD TOOL |
BRANTFORD TOOL HYDRAULIC POSITIONER. 120,000 LB. (60 TONS) CAPACITY AT 12" CENTER OF GRAVITY, 90 DEGREE HYDRAULIC POWERED TILT, VARIABLE SPEED ROTATION FROM .006 TO .6 RPM, 113" ROUND TABLE WITH (6) T-SLOTS, 74" TABLE HEIGHT HORIZONTAL, 66" CENTERLINE VERTICAL, 8' 6" MAXIMUM DIAMETER IN VERTICAL POSITION, PENDANT CONTROL FOR ALL FUNCTIONS, 575 VOLT, SHIPPING WEIGHT 48,500 LBS., SERIAL #3671
|
🔒 Subscribe | ||
|
|
BARBER-COLMAN | 16-16 |
BARBER-COLMAN 16-16 HORIZONTAL GEAR HOBBER . MAXIMUM RATED DIAMETERAL PITCH: 6 DP, MAXIMUM RATED DIAMETER OF WORK: 16", MAXIMUM HOB DIAMETER: 5", MAXIMUM HOB-SLIDE TRAVEL: 16", MAXIMUM WORK SLIDE TRAVEL: 8", MAXIMUM DISTANCE WORK SPINDLE CENTERLINE TO HOB SPINDLE CENTERLINE: 8.75", MINIMUM DISTANCE WORK SPINDLE CENTERLINE TO HOB SPINDLE CENTERLINE: .75", MAXIMUM DISTANCE WORK SPINDLE FACE TO TAILSTOCK-CENTER: 44", WORK SPINDLE THRU-BORE DIAMETER: 4.13", HOB SPEED RANGE: 59 TO 425 RPM, FEED RANGES: .015 TO .150 I.P.R., MAIN DRIVE MOTOR: 5HP, RAPID TRAVERSE: 2 HP, COOLANT PUMP: 1/4HP, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 6,000 LBS., APPROX. SHIPPING DIMENSIONS: 84" L X 48" W X 72" H
|
🔒 Subscribe | |
|
|
LINCOLN | S500 POWERWAVE |
LINCOLN S500 POWERWAVE POWER SUPPLY PN - K2904-1 S/N: 1150806169, CODE - 11813
|
🔒 Subscribe | |
|
|
CROWN | 30SCTT |
CROWN 30SCTT ELECTRIC FORKLIFT. 2,850 LIFT CAPACITY, 2300 LB BATTERY WEIGHT, 4832 TOTAL LBS. S/N: W-16542
|
🔒 Subscribe | |
|
|
BIRMINGHAM | BPV-1050 |
BIRMINGHAM BPV-1050 10 X 54 5HP VERTICAL MILLING MACHINE. TABLE SIZE: 10" X 54", MOTOR: 5 HP, SPINDLE TAPER: NMTB40 (QUICK CHANGE), SPINDLE SPEEDS: 60 - 4300 RPM, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 3,500 LBS., APPROX. SHIPPING DIMENSIONS: 6' L X 6' W X 8' H ***DRO AND POWER FEEDS DON'T WORK.
|
🔒 Subscribe | |
|
|
DENISON | WR45LC |
DENISON WR45LC MULTIPRESS 4 TON HYDRAULIC C FRAME PRESS. TONNAGE: 4, STROKE: 12", DAYLIGHT: 16", THROAT: 7.5", RAM DIAMETER: 1.625", BED SIZE: 18-1/2" X 11-5/16", MOTOR HP: 5, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 3,000 LBS., APPROX. SHIPPING DIMENSIONS: 50" L X 50" W X 90" H
|
🔒 Subscribe | |
|
|
GREENERD | HPB-5 |
GREENERD HPB-5 5 TON C-FRAME HYDRAULIC PRESS W/ SAFETY CURTAINS. TONNAGE: 5, BED SIZE: 14" X 10", RESERVOIR CAPACITY: 12 GALLONS, ELECTRICAL: 460V/3PH BANNER EZ-SCREEN LIGHT CURTAINS, FOOT PEDAL APPROX. SHIPPING WEIGHT: 2,500 LBS., APPROX. SHIPPING DIMENSIONS: 50" L X 50" W X 80" H
|
🔒 Subscribe | |
|
|
K.O. LEE | BA962H |
K.O. LEE BA962H TOOL & CUTTER GRINDER, B943 WORK HEAD. SWING OVER TABLE: 8-1/4", DISTANCE BETWEEN TAILSTOCKS: 22", TABLE WORKING SURFACE: 5-1/4" X 27", TABLE TRAVERSE: 14", VERTICAL MOVEMENT OF COLUMN: 7", ELECTRICAL: 230V/3PH KO LEE B943 MOTORIZED WORK HEAD, CENTER FIXTURE, GRAYMILLS COOLANT SYSTEM
|
🔒 Subscribe | |
|
|
DOALL | D618-7 |
DOALL D618-7 6 X 18 3-AXIS AUTOMATIC HYDRAULIC SURFACE GRINDER, INCREMENTAL DOWNFEED. GRINDING CAPACITY:6 X 18, GRINDING WHEEL SIZE:7 X 1/2 X 1-1/4, HYDRAULIC TABLE TRAVEL:5 TO 125 FPM, ELECTRICAL:460V/3PH. INCREMENTAL DOWNFEED, INCREMENTAL CROSS FEED, HYDRAULICALLY DRIVEN LONGITUDINAL FEED, DOALL SELECTRON CONTROLLER W/ MAGNA-LOCK HU-618 MAGNETIC CHUCK, GUSHER COOLANT SYSTEM, BIJUR AUTOMATIC LUBE SYSTEM. APPROX. SHIPPING WEIGHT:3,000 LBS., APPROX. SHIPPING DIMENSIONS:6 L X 5 W X 6 H
|
🔒 Subscribe | |
|
|
CYCLO-BLAST | PN-300295-4836-F |
CYCLO-BLAST PN-300295-4836-F 48 X 36 BLAST CABINET W/ DUST COLLECTION. INSIDE DIMENSIONS: 48" L X 36" W, BLOWER MOTOR HP: 1, ELECTRICAL: 115V/1PH QUICK LATCH SIDE DOOR, FOOT PEDAL OPERATION FOR BLAST GUN, RECYCLE CYCLONE ATTACHMENT WITH 24 BAG DUST COLLECTOR, HAND LEVER TO SHAKE BAGS, MOTORIZED SIDE AUGER, START/STOP ELECTRICAL SWITCHES, (2) INTERNAL LIGHTS APPROX. SHIPPING WEIGHT: 1,500 LBS., APPROX. SHIPPING DIMENSIONS: 64" L X 64" W X 96" H
|
🔒 Subscribe | |
|
|
WEXXAR BEL | 252 TOP ONLY SIDE BELT FULLY AUTOMATIC CASE TAPER |
WEXXAR BEL 252 TOP ONLY SIDE BELT FULLY AUTOMATIC CASE TAPER. SPEED: UP TO 25 CASES PER MINUTE, MACHINE DIMENSIONS: 58" (L) X 33" (W) X 53.3" (H), PNEUMATIC REQUIREMENTS: 80-90 PSI / 6 BAR, CASE SIZE MINIMUM: 8" X 6" X 4-1/2", CASE SIZE MAXIMUM: 22" X 15" X 16", INFEED/OUTFEED HEIGHT MINIMUM: 23-1/2", INFEED/OUTFEED HEIGHT MAXIMUM: 32", ELECTRICAL REQUIREMENTS: 120V/1PH APPROX. SHIPPING WEIGHT: 1,000 LBS., APPROX. SHIPPING DIMENSIONS: 72" L X 48" W X 80" H
|
🔒 Subscribe | |
|
|
MAXMILL | YC 1-1/2VA 9 X 42 |
MAXMILL YC 1-1/2VA 9 X 42 VERTICAL MILLING MACHINE. TABLE SIZE: 9" X 42", QUILL TRAVEL: 5", SPINDLE TAPER: R8, SPINDLE SPEEDS (8): 80/135/210/325/660/1115/1750/2720 RPM, MOTOR HP: 2, ELECTRICAL: 460V/3PH APPROX. SHIPPING WEIGHT: 2,500 LBS., APPROX. SHIPPING DIMENSIONS: 64" L X 64" W X 84" H
|
🔒 Subscribe | |
|
|
1996 | TAYLOR WINFIELD |
1996 TAYLOR WINFIELD 70 KVA EQUALIZING ROCKER ARM WELDER. 70 KVA, 460 VOLT, 20ODEPTH, WATER COOLED, SELF-EQUALIZING ARMS, HIGH PRODUCTION SYSTEM WITH QUICK MANUAL PART INDEXING FOR ROTATION AND FORWARD- BACK FEED.
|
🔒 Subscribe | |
|
|
MARVEL | SERIES 8 8/M8/M9 |
MARVEL SERIES 8 8/M8/M9 18 X 20 VERTICAL TILT FRAME BAND SAW. CAPACITY: 18" X 20", BLADE WIDTH CAPACITY: 1", BLADE SPEEDS (12): 26 - 272 FPM, TABLE WORKING SURFACE: 33" X 31", ELECTRICAL: 460V/3PH 4 SPEED GEAR BOX APPROX. SHIPPING WEIGHT: 2,500 LBS., APPROX. SHIPPING DIMENSIONS: 84" L X 40" W X 84" H
|
🔒 Subscribe | |
|
|
BANCROFT | VHI-18 |
BANCROFT VHI-18 VERTICAL WELDING LATHE 30" LENGTH CAPACITY BETWEEN THE HEADSTOCK AND THE TAILSTOCK, CURRENTLY EQUIPPED WITH AN AIR CLAMPING FIXTURE THAT LIMITS THE LENGTH TO 11, UP TO 35 DIAMETER CAPACITY, 8 DIAMETER CAPACITY WITH THE CURRENT TORCH MOUNT, 400 LB. WEIGHT CAPACITY, A SYNCHRONIZED ROTARY DRIVE ROTATES THE OPPOSING VERTICAL SPINDLES AT THE SAME SPEED, THIS MAINTAINS THE RADIAL ALIGNMENT BETWEEN TWO PARTS WITH NO CHANCE OF SLIPPAGE, 230 OR 460 VOLT, SERIAL #3899/124-001
|
🔒 Subscribe | |
|
|
ITNAC | 2000 LB. POSI-TURNER |
ITNAC 2000 LB. POSI-TURNER 2,000 LB CAPACITY, S/N: 011871, 690 LB EQUIPMENT WEIGHT.
|
🔒 Subscribe | |
|
|
CECIL PECK | 500 LB CAPACITY PIPE ROLLER SYSTEM |
CECIL PECK 500 LB CAPACITY PIPE ROLLER SYSTEM. 500 LB. WEIGHT CAPACITY, 1" TO 6" DIAMETER CAPACITY, CUSTOM BUILT UNITIZED FRAME WITH A HOLD DOWN WHEEL, PERFECT FOR WELDING "TEES" & ELBOWS, VARIABLE SPEED FROM .03 TO 1.25 RPM, 1.75" X 6" DIAMETER RUBBER WHEELS, 20' VARIABLE SPEED FOOT PEDAL, 115 VOLT, SINGLE PHASE, SERIAL # 72104.
|
🔒 Subscribe | |
|
|
MILLER | SYNCROWAVE 300 AC/DC |
MILLER SYNCROWAVE 300 AC/DC 300 AMP TUNGSTEN TIG WELDER W/ MILLER COOLMATE 12. INPUT VOLTAGE: 200/230/460, INPUT AMPERAGE: 138/120/60, INPUT PHASE: 1, RATED OUTPUT: 300 AMPS @ 60% DUTY CYCLE MILLER RFCS-23 FOOT PEDAL, WELDTECH TIG TORCH, GROUND CLAMP, CART WITH CASTERS APPROX. SHIPPING WEIGHT: 1,100 LBS., APPROX. SHIPPING DIMENSIONS: 64" L X 48" W X 72" H
|
🔒 Subscribe | |
|
|
MILLER | SYNCROWAVE 351 |
MILLER SYNCROWAVE 351 AC/DC WATER COOLED TIG WELDER W/ BERNARD COOLER. INPUT VOLTS: 230V/3PH, PHASE: 3, RATED OUTPUT: 300A@32VDC, 60% DUTY CYCLE BERNARD 2500SS WATER COOLER APPROX. SHIPPING WEIGHT: 700 LBS., APPROX. SHIPPING DIMENSIONS: 48" L X 48" W X 50" H
|
🔒 Subscribe | |
|
|
HYUNDAI | 20 SHIPPING CONTAINER |
HYUNDAI 20 SHIPPING CONTAINER / PAINT SPRAY BOOTH CONVERSION. EXHAUST FAN POWER REQUIREMENTS: 5HP, 230/460V, 3PH, INTERNAL DIMENSIONS OF SHIPPING CONTAINER: 19' 4" L X 7' 9" W X 7' 10" H, EXTERNAL DIMENSIONS OF SHIPPING CONTAINER: 20' L X 8' W X 8' 6" H APPROX. SHIPPING WEIGHT: 6,000 LBS., APPROX. SHIPPING DIMENSIONS: 20' L X 8.5' W X 10.5' H
|
🔒 Subscribe | |
|
|
BRIERLEY | ZB-50 |
BRIERLEY ZB-50 DRILL GRINDER / SHARPENER. DRILL SIZE: 2.5 - 50MM DIAMETER, POINT ANGLE: 40 - 180 DEGREES, MAIN WHEEL SIZE: 200 X 42 X 31.75MM, POINT THINNING WHEEL SIZE: 190 X 18 X 31.75MM, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 700 LBS., APPROX. SHIPPING DIMENSIONS: 48" L X 48" W X 64" H
|
🔒 Subscribe | |
|
|
MARK FIVE | AUTOMATED MANIPULATOR TURNTABLE SYSTEM |
MARK FIVE AUTOMATED MANIPULATOR TURNTABLE SYSTEM. TURN TABLE IS 1,000 LB. CAPACITY, 20" FROM FLOOR TO TABLE SURFACE, 24" DIAMETER TABLE WITH SLOTS, 3" DIAMETER THROUGH HOLE, VARIABLE SPEED ROTATION FROM .01 TO 1.4 RPM. MANIPULATOR IS 24" OF MANUAL BOOM HEIGHT ADJUSTMENT, ARM IS FIXED OVER THE TURNTABLE, LIFT RANGE FROM 5.25" TO 39.25" ABOVE THE TABLE, MANUAL REACH OF 24" VIA HAND WHEEL. S/N: JN-1189
|
🔒 Subscribe | |
|
|
MILLER | GOLDSTAR 600SS TIG-RIG |
MILLER GOLDSTAR 600SS TIG-RIG DIGI-METER 600, 08/230/460V, 3-PHASE S/N:KA851474
|
🔒 Subscribe | |
|
|
LINCOLN | CV-400 |
LINCOLN CV-400 POWER SUPPLY S/N: AC-719267
|
🔒 Subscribe | |
|
|
THERMAL DYNAMICS | PAK45 |
THERMAL DYNAMICS PAK45 PLASMA SYSTEM 208/230/460 3-PHASE INPUT POWER S/N: L32024A17983F
|
🔒 Subscribe | |
|
|
DYNACON | 12SS2608OR |
DYNACON 12SS2608OR 12 W X 160 L PORTABLE MOTORIZED MODULAR CONVEYOR. CONVEYOR BELT WIDTH BETWEEN HOUSING: 11-7/8", APPROXIMATE OVERALL LENGTH OF CONVEYOR (CURRENT SETUP): 160", ELECTRICAL: 110V/1PH APPROX. SHIPPING WEIGHT: 500 LBS., APPROX. SHIPPING DIMENSIONS: 14' L X 2' W X 5' H
|
🔒 Subscribe | |
|
|
25-1/2 DOUBLE END NON-MOTORIZED COIL REEL UNCOILER, 48 OD. MANDREL: 25-1/2", ID: 16" TO 24", OD: 48" MECHANICAL FOOT LEVER TO RELEASE PIN TO ROTATE HEADS, MANUAL DRAG BRAKES, HANDLE FOR ADJUSTING MANDREL EXPANSION
|
🔒 Subscribe | |||
|
|
PRATT & WHITNEY | 12 HORIZONTAL / VERTICAL TILTING ROTARY TABLE |
PRATT & WHITNEY 12 HORIZONTAL / VERTICAL TILTING ROTARY TABLE
|
🔒 Subscribe | |
|
|
DIAMOND | C-40 |
DIAMOND C-40 TOOL & CUTTER GRINDER. TABLE WORKING SURFACE SIZE: 37-1/8" L X 5-1/2" W, MOTOR HP: 1, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 2,000 LBS., APPROX. SHIPPING DIMENSIONS: 60" L X 60" W X 68" H
|
🔒 Subscribe | |
|
|
CHAMPION | VR-5-8UP |
CHAMPION VR-5-8UP 5HP RECIPROCATING AIR COMPRESSOR. MOTOR HP: 5, TANK CAPACITY: 80 GALLON, ELECTRICAL: 230V/3PH
|
🔒 Subscribe | |
|
|
LOCKFORMER | TDC 10 |
LOCKFORMER TDC 10 X 18 GAUGE HYDRAULIC DUCT NOTCHER. THICKNESS CAPACITY: 18 GAUGE, MEASURING RAIL LENGTH: 10', ELECTRICAL: 230V/3PH FOOT PEDAL OPERATION, 3 NOTCHING HEADS (CAN DO UP TO 6 TOTAL) APPROX. SHIPPING WEIGHT: 800 LBS., APPROX. SHIPPING DIMENSIONS: 10' L X 3' W X 4' H
|
🔒 Subscribe | |
|
|
MOTORIZED GEAR DRIVEN HORIZONTAL BROACHING MACHINE. APPROXIMATE STROKE WITH CURRENT LIMIT SWITCH SETUP: 38", APPROXIMATE MAX STROKE WITH REMOVAL OF LIMIT SWITCHES: 53", OVERALL LENGTH OF MACHINE: 103", ELECTRICAL: 230V/3PH FORWARD / REVERSE SELECTOR SWITCH, COOLANT PUMP, CASTERS APPROX. SHIPPING WEIGHT: 2,000 LBS., APPROX. SHIPPING DIMENSIONS: 9' L X 4' W X 5' H
|
🔒 Subscribe | |||
|
|
FOSDICK | 36 X 18 JIG BORER |
FOSDICK 36 X 18 JIG BORER WITH ACU-RITE III 2-AXIS DIGITAL READOUT. TABLE SIZE: 36" X 18", SPINDLE TRAVEL: 9.5", HEAD TRAVEL: 14", SPINDLE SPEEDS (12): 80 TO 1500 RPM, SPINDLE FEEDS (9): .0012 TO .010 IPR, ELECTRICAL: 460V/3PH ACU-RITE III 2-AXIS DIGITAL READOUT APPROX. SHIPPING WEIGHT: 9,000 LBS., APPROX. SHIPPING DIMENSIONS: 72" L X 72" W X 118" H
|
🔒 Subscribe | |
|
|
AJAX | AK25-120H |
AJAX AK25-120H 25HP RECIPROCATING AIR COMPRESSOR. TANK SIZE: 120 GALLON, MOTOR HP: 25, ELECTRICAL: 230V/3PH APPROX. SHIPPING WEIGHT: 2,000 LBS., APPROX. SHIPPING DIMENSIONS: 6' L X 3' W X 5' H
|
🔒 Subscribe | |
|
|
DELTA ROCKWELL | 17-600 |
DELTA ROCKWELL 17-600 2 HEAD 17 GANG DRILL PRESS. TABLE SIZE: 65" LONG X 23-1/2" WIDE, SWING: 17", MOTOR HP (EACH): 1.5, ELECTRICAL: 230V/3PH INDEPENDENT START/STOP BUTTONS FOR EACH DRILL HEAD APPROX. SHIPPING WEIGHT: 1,500 LBS., APPROX. SHIPPING DIMENSIONS: 72" L X 40" W X 96" H
|
🔒 Subscribe | |
|
|
DYNACON | 12VS39080R |
DYNACON 12VS39080R 12 W X 102 L PORTABLE MOTORIZED MODULAR CONVEYOR. CONVEYOR BELT WIDTH BETWEEN HOUSING: 11-7/8", APPROXIMATE OVERALL LENGTH OF CONVEYOR (CURRENT SETUP): 102", ELECTRICAL: 110V/1PH APPROX. SHIPPING WEIGHT: 300 LBS., APPROX. SHIPPING DIMENSIONS: 102" L X 20" W X 54" H
|
🔒 Subscribe | |
|
|
STONE | M75 16 |
STONE M75 16 7.5HP HEAVY DUTY ABRASIVE CUT OFF SAW. BLADE CAPACITY: 16", ARBOR SHAFT: 1", MOTOR HP: 7.5, ELECTRICAL: 230V/3PH
|
🔒 Subscribe | |
|
|
HOFMANN | GRS/M-400 |
HOFMANN GRS/M-400 15-3/4 VERTICAL / HORIZONTAL TILTING ROTARY TABLE
|
🔒 Subscribe | |
|
|
LINDE | UCC-305 |
LINDE UCC-305 AC DC TIG / STICK 300 AMP WELDER. INPUT VOLTS: 208/230/460, INPUT PHASE: 1, RATED OUTPUT: 300 AMPS @ 60% DUTY CYCLE FOOT PEDAL CONTROL, TIG TORCH, ELECTRODE STICK HOLDER, GROUND CLAMP APPROX. SHIPPING WEIGHT: 1,250 LBS., APPROX. SHIPPING DIMENSIONS: 48" L X 48" W X 48" H
|
🔒 Subscribe |
SCHWARZE-WIRTZ CNC 80 DB 3.25
SCHWARZE-WIRTZ CNC 80 DB 3.25 TUBE BENDER W/ BENDPRO CONTROLLER, AUTOMATION AND TOOLING. MAXIMUM TUB...
ESAB 70TA
70 TON ESAB SELF ALIGNING TURNING ROLLS. MODEL: 70TA, 140,000 LBS LOAD CAPACITY (SET), 210,000 LBS L...
GENIE GS-2032
GENIE GS-2032 20 ELECTRIC SCISSOR LIFT, NEW BATTERIES / CHARGER, MANLIFT, AERIAL PLATFORM . BATTERY ...
OCEAN / RUSH REJUVENATOR 2
OCEAN / RUSH REJUVENATOR 2 CAPACITY DRILL SHARPENER / GRINDER. CAPACITY: 3/32" TO 2" DRILL DIAMETER,...
BRIDGEPORT TORQ-CUT 30
BRIDGEPORT TORQ-CUT 30 CNC 3-AXIS VERTICAL MACHINING CENTER. TABLE SIZE: 36" X 14", X-AXIS TRAVEL: 3...
SAF 4'
SAF 4' SEAM WELDER. 54" TOTAL WELDING AND CLAMPING LENGTH CAPACITY, RATED AT 48", 8" MINIMUM PART DI...
APPLIED GRINDING TECHNOLOGIES CNC FORM WHEEL DRESSING MACHINE
APPLIED GRINDING TECHNOLOGIES CNC FORM WHEEL DRESSING MACHINE WITH AGT CNC CONTROLLER. MAXIMUM WHEEL...
MOTOMAN HP50N-AOO
MOTOMAN HP50N-AOO 6 AXIS ROBOT W/ NX100 CONTROLLER, ACT ROBOTIC FINISHING CELL. NUMBER OF AXES: 6, P...
BRIDGEPORT J-HEAD 9 X 42
BRIDGEPORT J-HEAD 9 X 42 VERTICAL MILLING MACHINE W/ ACU-RITE DRO, SERVO POWER FEED. TABLE SIZE: 9" ...
BIRMINGHAM YCL-1340
BIRMINGHAM YCL-1340 13 X 40 TOOL ROOM GEARED HEAD LATHE W/ DRO. SWING OVER BED: 13", DISTANCE BETWEE...
PH
16800 LB PH USED WELDING POSITIONER. 16,800 LB. CAPACITY AT 12" CENTER OF GRAVITY, 135 DEGREE POWER ...
BRANTFORD TOOL
BRANTFORD TOOL HYDRAULIC POSITIONER. 120,000 LB. (60 TONS) CAPACITY AT 12" CENTER OF GRAVITY, 90 DEG...
BARBER-COLMAN 16-16
BARBER-COLMAN 16-16 HORIZONTAL GEAR HOBBER . MAXIMUM RATED DIAMETERAL PITCH: 6 DP, MAXIMUM RATED DIA...
LINCOLN S500 POWERWAVE
LINCOLN S500 POWERWAVE POWER SUPPLY PN - K2904-1 S/N: 1150806169, CODE - 11813...
CROWN 30SCTT
CROWN 30SCTT ELECTRIC FORKLIFT. 2,850 LIFT CAPACITY, 2300 LB BATTERY WEIGHT, 4832 TOTAL LBS. S/N: W-...
BIRMINGHAM BPV-1050
BIRMINGHAM BPV-1050 10 X 54 5HP VERTICAL MILLING MACHINE. TABLE SIZE: 10" X 54", MOTOR: 5 HP, SPINDL...
DENISON WR45LC
DENISON WR45LC MULTIPRESS 4 TON HYDRAULIC C FRAME PRESS. TONNAGE: 4, STROKE: 12", DAYLIGHT: 16", THR...
GREENERD HPB-5
GREENERD HPB-5 5 TON C-FRAME HYDRAULIC PRESS W/ SAFETY CURTAINS. TONNAGE: 5, BED SIZE: 14" X 10", R...
K.O. LEE BA962H
K.O. LEE BA962H TOOL & CUTTER GRINDER, B943 WORK HEAD. SWING OVER TABLE: 8-1/4", DISTANCE BETWEEN TA...
DOALL D618-7
DOALL D618-7 6 X 18 3-AXIS AUTOMATIC HYDRAULIC SURFACE GRINDER, INCREMENTAL DOWNFEED. GRINDING CAPAC...
CYCLO-BLAST PN-300295-4836-F
CYCLO-BLAST PN-300295-4836-F 48 X 36 BLAST CABINET W/ DUST COLLECTION. INSIDE DIMENSIONS: 48" L X 3...
WEXXAR BEL 252 TOP ONLY SIDE BELT FULLY AUTOMATIC CASE TAPER
WEXXAR BEL 252 TOP ONLY SIDE BELT FULLY AUTOMATIC CASE TAPER. SPEED: UP TO 25 CASES PER MINUTE, MACH...
MAXMILL YC 1-1/2VA 9 X 42
MAXMILL YC 1-1/2VA 9 X 42 VERTICAL MILLING MACHINE. TABLE SIZE: 9" X 42", QUILL TRAVEL: 5", SPINDLE ...
1996 TAYLOR WINFIELD
1996 TAYLOR WINFIELD 70 KVA EQUALIZING ROCKER ARM WELDER. 70 KVA, 460 VOLT, 20ODEPTH, WATER COOLED, ...
MARVEL SERIES 8 8/M8/M9
MARVEL SERIES 8 8/M8/M9 18 X 20 VERTICAL TILT FRAME BAND SAW. CAPACITY: 18" X 20", BLADE WIDTH CAPAC...
BANCROFT VHI-18
BANCROFT VHI-18 VERTICAL WELDING LATHE 30" LENGTH CAPACITY BETWEEN THE HEADSTOCK AND THE TAILSTOCK, ...
ITNAC 2000 LB. POSI-TURNER
ITNAC 2000 LB. POSI-TURNER 2,000 LB CAPACITY, S/N: 011871, 690 LB EQUIPMENT WEIGHT....
CECIL PECK 500 LB CAPACITY PIPE ROLLER SYSTEM
CECIL PECK 500 LB CAPACITY PIPE ROLLER SYSTEM. 500 LB. WEIGHT CAPACITY, 1" TO 6" DIAMETER CAPACITY,...
MILLER SYNCROWAVE 300 AC/DC
MILLER SYNCROWAVE 300 AC/DC 300 AMP TUNGSTEN TIG WELDER W/ MILLER COOLMATE 12. INPUT VOLTAGE: 200/23...
MILLER SYNCROWAVE 351
MILLER SYNCROWAVE 351 AC/DC WATER COOLED TIG WELDER W/ BERNARD COOLER. INPUT VOLTS: 230V/3PH, PHASE:...
HYUNDAI 20 SHIPPING CONTAINER
HYUNDAI 20 SHIPPING CONTAINER / PAINT SPRAY BOOTH CONVERSION. EXHAUST FAN POWER REQUIREMENTS: 5HP, 2...
BRIERLEY ZB-50
BRIERLEY ZB-50 DRILL GRINDER / SHARPENER. DRILL SIZE: 2.5 - 50MM DIAMETER, POINT ANGLE: 40 - 180 DEG...
MARK FIVE AUTOMATED MANIPULATOR TURNTABLE SYSTEM
MARK FIVE AUTOMATED MANIPULATOR TURNTABLE SYSTEM. TURN TABLE IS 1,000 LB. CAPACITY, 20" FROM FLOOR T...
MILLER GOLDSTAR 600SS TIG-RIG
MILLER GOLDSTAR 600SS TIG-RIG DIGI-METER 600, 08/230/460V, 3-PHASE S/N:KA851474...
LINCOLN CV-400
LINCOLN CV-400 POWER SUPPLY S/N: AC-719267...
THERMAL DYNAMICS PAK45
THERMAL DYNAMICS PAK45 PLASMA SYSTEM 208/230/460 3-PHASE INPUT POWER S/N: L32024A17983F...
DYNACON 12SS2608OR
DYNACON 12SS2608OR 12 W X 160 L PORTABLE MOTORIZED MODULAR CONVEYOR. CONVEYOR BELT WIDTH BETWEEN HO...
25-1/2 DOUBLE END NON-MOTORIZED COIL REEL UNCOILER, 48 OD. MANDREL: 25-1/2", ID: 16" TO 24", OD: 48"
PRATT & WHITNEY 12 HORIZONTAL / VERTICAL TILTING ROTARY TABLE
PRATT & WHITNEY 12 HORIZONTAL / VERTICAL TILTING ROTARY TABLE...
DIAMOND C-40
DIAMOND C-40 TOOL & CUTTER GRINDER. TABLE WORKING SURFACE SIZE: 37-1/8" L X 5-1/2" W, MOTOR HP: 1, E...
CHAMPION VR-5-8UP
CHAMPION VR-5-8UP 5HP RECIPROCATING AIR COMPRESSOR. MOTOR HP: 5, TANK CAPACITY: 80 GALLON, ELECTRICA...
LOCKFORMER TDC 10
LOCKFORMER TDC 10 X 18 GAUGE HYDRAULIC DUCT NOTCHER. THICKNESS CAPACITY: 18 GAUGE, MEASURING RAIL L...
MOTORIZED GEAR DRIVEN HORIZONTAL BROACHING MACHINE. APPROXIMATE STROKE WITH CURRENT LIMIT SWITCH SET
FOSDICK 36 X 18 JIG BORER
FOSDICK 36 X 18 JIG BORER WITH ACU-RITE III 2-AXIS DIGITAL READOUT. TABLE SIZE: 36" X 18", SPINDLE ...
AJAX AK25-120H
AJAX AK25-120H 25HP RECIPROCATING AIR COMPRESSOR. TANK SIZE: 120 GALLON, MOTOR HP: 25, ELECTRICAL: 2...
DELTA ROCKWELL 17-600
DELTA ROCKWELL 17-600 2 HEAD 17 GANG DRILL PRESS. TABLE SIZE: 65" LONG X 23-1/2" WIDE, SWING: 17", ...
DYNACON 12VS39080R
DYNACON 12VS39080R 12 W X 102 L PORTABLE MOTORIZED MODULAR CONVEYOR. CONVEYOR BELT WIDTH BETWEEN HO...
STONE M75 16
STONE M75 16 7.5HP HEAVY DUTY ABRASIVE CUT OFF SAW. BLADE CAPACITY: 16", ARBOR SHAFT: 1", MOTOR HP: ...
HOFMANN GRS/M-400
HOFMANN GRS/M-400 15-3/4 VERTICAL / HORIZONTAL TILTING ROTARY TABLE...
LINDE UCC-305
LINDE UCC-305 AC DC TIG / STICK 300 AMP WELDER. INPUT VOLTS: 208/230/460, INPUT PHASE: 1, RATED OUTP...