Complete Closure of American Jebco Corp

Holland Industrial Group

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 81

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 81 lots

Year	Make	Model	Lot Description	Hammer Price
	KEARNEY & TRECKER	H NO. 2	KEARNEY & TRECKER MODEL H NO. 2 VERTICAL MILLING MACHINE S/N: 13-3612 KEARNEY & TRECKER · H NO. 2	🔒 Subscribe
			WIRE WELDER WITH 3 INCH BENCH VISE	🔒 Subscribe
	NEW LONDON ENGINEERING	T3 2-1/2" 741	NEW LONDON ENGINEERING T3 2-1/2 INCH 741 CHIP CONVEYOR S/N: 92-30750-2 NEW LONDON ENGINEERING · T3 2-1/2" 741	🔒 Subscribe
	WATERBURY FERREL	NO. 10	WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE S/N: 112 WATERBURY FERREL · NO. 10	🔒 Subscribe
	FASTENER ENGINEERS INC.	WR-01-16	FASTENER ENGINEERS INC. MODEL WR-01-16 WIRE DRAWING MACHINE S/N 1741970 FASTENER ENGINEERS INC. · WR-01-16	🔒 Subscribe
			60 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			50 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			60 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			4-POST TRIM PRESS, 14 INCH X 15 INCH BETWEEN POSTS, 8 INCH DIA. RAM, ENCLOSURE	🔒 Subscribe
	FUJI ELECTRIC	FRENIC-MINI	102" X 8" ELEVATOR PARTS CONVEYOR WITH FUJI ELECTRIC FRENIC-MINI DRIVE FUJI ELECTRIC · FRENIC-MINI	🔒 Subscribe
	FEDERAL PRESS CO.	NO. 4 OBI	FEDERAL PRESS CO. NO. 4 OBI MECHANICAL TRIM PRESS, 1/4 TO 1/2 INCH WIRE DIA., 1-1/4 TO 4 INCH SHANK RANGE, 4-1/2 INCH STROKE, 2 INCH RAM ADJUSTMENT, UP TO 100 PPM PRODUCTION RATE, 7.5 HP 900 RPM MOTOR, WITH UNIVERSAL FEEDER CO. VIBRATORY BOWL FEEDER FEDERAL PRESS CO. · NO. 4 OBI	🔒 Subscribe
	WATERBURY FERREL	NO. 0	WATERBURY FERREL NO. 0 THREAD ROLLING MACHINE, 3/16 INCH MAX THREAD DIA., 1-1/2 INCH MAX THREAD LENGTH, 3-1/4 INCH LENGTH OF MOVING DIE FACE, 2-3/4 INCH LENGTH OF STATIONARY DIE FACE, 125 TO 150 PPM PRODUCTION RATE, 1 HP 1200 RPM MOTOR, WITH VIBRATORY BOWL FEEDER S/N: 12 WATERBURY FERREL · NO. 0	🔒 Subscribe
	WATERBURY FERREL	NO. 10	WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE, 2" MAX THREAD LENGTH, 5" LENGTH OF MOVING DIE FACE, 4-1/4" LENGTH OF STATIONARY DIE FACE, 150 PPM PRODUCTION RATE, 3 HP MOTOR, WITH VIBRATORY BOWL FEEDER S/N: 12 WATERBURY FERREL · NO. 10	🔒 Subscribe
	WATERBURY FERREL	NO. 1 1/4"	WATERBURY FERREL NO. 1 1/4" AUTO BOLT TRIMMER, 1/4" MAX TRIM & EXTRUDE WIRE DIA., 5/16" MAX DIA. HEX HEAD BOLT TRIM, 3/8" TO 2" SHANK LENGTH, 130 PPM PRODUCTION RATE WITH MIDWEST FEEDER VIBRATORY BOWL FEEDER S/N: 2 WATERBURY FERREL · NO. 1 1/4"	🔒 Subscribe
	WATERBURY FERREL	NO. 2	WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUDE, 1/2 INCH HEX HEAD BOLTS TRIM ONLY, 1/2 INCH TO 3 INCH SHANK LENGTH, UP TO 110 PPM PRODUCTION RATE, ANDERSON CONTROLS INC. PD SENSOR CONTROL, PARTS ELEVATOR CONVEYOR, VIBRATORY BOWL FEEDER, MACHINE NO. 1 S/N: S-67171 78 67706 WATERBURY FERREL · NO. 2	🔒 Subscribe
	MICRO WELD	T20	MICRO WELD T20 WIRE WELDER MICRO WELD · T20	🔒 Subscribe
	H.P. NORLING	230RS	H.P. NORLING MODEL 230RS WIRE HEATER, 0.080 TO 0.425 INCH WIRE DIA. RANGE, 10 KVA, OUTPUT: 12/24V, INPUT: 230V, 60 HZ S/N 2073 H.P. NORLING · 230RS	🔒 Subscribe
	H.P. NORLING	60R	H.P. NORLING MODEL 60R WIRE HEATER, 1/16 INCH TO 5/16 INCH WIRE DIA. RANGE, 3.3 KVA, OUTPUT: 24V, INPUT: 480V, 60 HZ S/N: 2752 H.P. NORLING · 60R	🔒 Subscribe
	NATIONAL MACHINERY	3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER	NATIONAL MACHINERY 3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER - ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 18631, MACHINE NO. 174 NATIONAL MACHINERY · 3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER	🔒 Subscribe
	FASTENER ENGINEERS	WR-01-16	FASTENER ENGINEERS WR-01-16 WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB. MACHINE NO. 3, S/N: 204 FASTENER ENGINEERS · WR-01-16	🔒 Subscribe
	SHUSTER		SHUSTER 1/4 INCH WIRE STRAIGHTENER SHUSTER	🔒 Subscribe
	NATIONAL MACHINERY	3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER	NATIONAL MACHINERY 3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER, 3/16" DIA. CUT-OFF, 1-1/4" DIE KICK-OUT, 225 PPM PRODUCTION RATE, 7-1/2 HP MOTOR, BUSHING CUT-OFF, SPLIT PUNCH BLOCK, ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 36827, MACHINE NO. 204 NATIONAL MACHINERY · 3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 204 SHUSTER · 3/8"	🔒 Subscribe
	RMG	34--034-01	RMG MODEL 34--034-01 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, 230V, 8.5A, 60 HZ, 3PH, MACHINE NO. 23 (SUPPLIED MACHINE NO. 150) S/N: 8303931 RMG · 34--034-01	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 173 SHUSTER · 3/8"	🔒 Subscribe
	SACMA	SP-11L	SACMA SP-11L 1/4" HIGH SPEED COLD HEADER, 6MM (1/4") MAX WIRE DIA., 50MM (2") MAX SHANK LENGTH, 70MM (2-3/4") MAX CUT-OFF LENGTH, 275 PPM MAX PRODUCTION RATE, SINGLE PLANE STRAIGHTENER, ANDERSON CONTROLS INC. PD SENSOR CONTROL, WEG CFW-11 VECTRUE INVERTER S/N: 41AG25 SACMA · SP-11L	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 150 SHUSTER · 3/8"	🔒 Subscribe
	FASTENER ENGINEERS	DH-190-250-24	WIRE DRAWING MACHINE, 5.9 HP, 24 INCH DIA. TORQUE HUB S/N: 1269941 FASTENER ENGINEERS · DH-190-250-24	🔒 Subscribe
1942	HILGELAND-RONSDORT	CH-4	1942 HILGELAND-RONSDORT MODEL CH-4 10MM COLD HEADER, 10MM DIE MAX HIGH TENSILE WIRE, 12MM DIA. MAX MILD STEEL WIRE, 130MM MAX SHANK LENGTH, 100 PPM PRODUCTION SPEED, 20 HP MOTOR, ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 1466 1942 · HILGELAND-RONSDORT · CH-4	🔒 Subscribe
			3/8" WIRE STRAIGHTENER	🔒 Subscribe
	RMG	45-0546-87	RMG MODEL 45-0546-87 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ABB 7.5HP VFD, 230V, 15A, 60 HZ, 3PH S/N 96083895 MACHINE NO. 5, SUPPLIED MACHINE NO. 172 RMG · 45-0546-87	🔒 Subscribe
	WATERBURY	3/8" SDDS COLDER HEADER	WATERBURY 3/8" SDDS COLDER HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENGTH, 135 PPM PRODUCTION SPEED, 85-TON HEADING CAPACITY, ANDERSON CONTROLS INC. PD SENSOR CONTROL, 25 HP 1200 RPM MOTOR, NO. 80, MACHINE NO. 172 S/N: 167757 WATERBURY · 3/8" SDDS COLDER HEADER	🔒 Subscribe
	WATERBURY FERREL	NO. 2	WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUDE, 1/2 INCH HEX HEAD BOLTS TRIM ONLY, 1/2 INCH TO 3 INCH SHANK LENGTH, UP TO 110 PPM PRODUCTION RATE, WITH VIBRATORY BOWL FEEDER S/N: 4 WATERBURY FERREL · NO. 2	🔒 Subscribe
	WATERBURY FARREL	3/8" SDDS	WATERBURY FARREL 3/8" SDDS COLD HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENGTH, 135 PPM PRODUCTION SPEED, 85-TON HEADING CAPACITY, ANDERSON CONTROLS INC. PD SENSOR CONTROL, 25 HP 1200 RPM MOTOR, S/N 86174 NO. 20, MACHINE NO. 175 WATERBURY FARREL · 3/8" SDDS	🔒 Subscribe
	NAKASHIMADA	TH3-6	1/4" NAKASHIMADA TH3-6 3 DIE 4 STATION, MAXIMUM WIRE DIAMETER: 0.25 (6MM), MAXIMUM CUT-OFF LENGTH: 2.75 (70MM), MAXIMUM PRODUCTION RATE: 80 TO 250 PPM, EQUIPPED WITH: BUSHING CUTOFF, MOTOR: 10 HP, FEED ROLL NAKASHIMADA · TH3-6	🔒 Subscribe
	NAKASHIMADA	PF-1080	NAKASHIMADA PF-1080 3/8 INCH 2-DIE 3-BLOW COLD HEADER, 10MM MAX WIRE DIA., 100MM MAX CUTOFF LENGTH, 80MM MAX SHANK LENGTH, 130MM MAX TRANSFER LENGTH, 8MM 2ND DIE RELIEF STROKE, 15MM 1ST PKO STROKE, 35MM 2ND PKO STROKE, 15MM 3RD PKO STROKE, 50-100 PPM PRODUCTION SPEED, 30 HP MOTOR, CHIP CONVEYOR S/N: 850027 NAKASHIMADA · PF-1080	🔒 Subscribe
	NAKASHIMADA	PF-630	NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF LENGTH, 2.047" 1ST DIE MAX KICKOUT STROKE, 1.181" 2ND DIE MAX KICKOUT STROKE, 50-170 PPM PRODUCTION SPEED S/N: 90462 NAKASHIMADA · PF-630	🔒 Subscribe
	RMG	45-0546-86	RMG MODEL 45-0546-86 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ALLEN BRADLEY POWERFLEX 4 5HP VFD, 230V, 15A, 60 HZ, 3PH, MACHINE NO. 14, SUPPLIED MACHINE NO. 112 S/N: 96093897 RMG · 45-0546-86	🔒 Subscribe
			WIRE DRAWING MACHINE, 3HP LENZE AC TECH SMVECTOR DRIVE, 20 INCH DIA. TORQUE HUB	🔒 Subscribe
	NAKASHIMADA	PF-860	NAKASHIMADA PF-860 5/16" COLD HEADER, 8MM MAX WIRE DIA., 80MM MAX CUT-OFF LENGTH, 115MM 1ST DIE MAX KICKOUT STROKE, 60MM 2ND DIE MAX KICKOUT STROKE, 50 TO 120 PPM PRODUCTION RATE, PKO, AC TECH TYPE M14400D 40HP MC SERIES INTELLIGENT DRIVE VFD, MACHINE NO. 115 S/N: 76092 NAKASHIMADA · PF-860	🔒 Subscribe
	NAKASHIMADA	PF-630	NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF LENGTH, 2.047" 1ST DIE MAX KICKOUT STROKE, 1.181" 2ND DIE MAX KICKOUT STROKE, 50-170 PPM PRODUCTION SPEED S/N: 830301 S NAKASHIMADA · PF-630	🔒 Subscribe
	THEMAC	J40	THEMAC MODEL J40 MEDIUM DUTY EXTERNAL LATHE GRINDER, 10,000 RPM, 115V S/N: 5916 THEMAC · J40	🔒 Subscribe
			WOODEN A-FRAME STAND WITH LARGE QUANTITY OF ASSORTED 5C COLLETS	🔒 Subscribe
			(25) 5C COLLETS WITH STAND	🔒 Subscribe
	ATLAS	10" BENCH LATHE	ATLAS 10" BENCH LATHE, 10" MAX SWING, 24" BETWEEN CENTERS, 3/4" HOLE THRU SPINDLE, QUICK CHANGE GEAR BOX, 6" 6-JAW CHUCK, TAIL STOCK ATLAS · 10" BENCH LATHE	🔒 Subscribe
	HARDINGE	DV-59	HARDINGE MODEL DV-59 PRECISION LATHE, 9 INCH SWING OVER BED, 18 INCH DISTANCE BETWEEN CENTERS, 5C COLLET SPINDLE, 1 INCH HOLE THRU SPINDLE, 230-3,000 SPINDLE RPM, TAIL STOCK, ASSORTED 5C COLLETS, 1HP 220V, 3PH HARDINGE · DV-59	🔒 Subscribe
	LEBLOND MAKINO	SERVO SHIFT 15	LEBLOND MAKINO SERVO SHIFT 15 ENGINE LATHE, 15 INCH MAX SWING, 32 INCH BETWEEN CENTERS, 10 INCH 3-JAW CHUCK, 2-1/4 INCH HOLE THRU SPINDLE, 45-1800 SPINDLE RPM, DOVE-TAIL TOOL POST, TAIL STOCK, DIGIPAC 6 DRO S/N: 15C-647 LEBLOND MAKINO · SERVO SHIFT 15	🔒 Subscribe
	HARDINGE	TFB-H	HARDINGE MODEL TFB-H PRECISION LATHE, 8 INCH SWING OVER CROSS SLIDE, 18 INCH DISTANCE BETWEEN CENTERS, 5C COLLET SPINDLE, 1 INCH HOLE THRU SPINDLE, 125-3,000 SPINDLE RPM, POWER FEED CARRIAGE CROSS SLIDE, TAIL STOCK, 5 INCH 3-JAW CHUCK, ASSORTED 5C COLLETS, 1.5 HP, 230V, 3PH HARDINGE · TFB-H	🔒 Subscribe
	EVERETT	8" ABRASIVE CHOP SAW	EVERETT 8" ABRASIVE CHOP SAW, 2HP, 3450 RPM, 115/208-230V, 1PH EVERETT · 8" ABRASIVE CHOP SAW	🔒 Subscribe
	RIDGID	9163.1011R	14 INCH ABRASIVE CHOP SAW, 10 HP, 208-230/460V, 3PH S/N: 9060.00003 RIDGID · 9163.1011R	🔒 Subscribe

Year	Make	Model	Description	Price
	KEARNEY & TRECKER	H NO. 2	KEARNEY & TRECKER MODEL H NO. 2 VERTICAL MILLING MACHINE S/N: 13-3612	🔒 Subscribe
			WIRE WELDER WITH 3 INCH BENCH VISE	🔒 Subscribe
	NEW LONDON ENGINEERING	T3 2-1/2" 741	NEW LONDON ENGINEERING T3 2-1/2 INCH 741 CHIP CONVEYOR S/N: 92-30750-2	🔒 Subscribe
	WATERBURY FERREL	NO. 10	WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE S/N: 112	🔒 Subscribe
	FASTENER ENGINEERS INC.	WR-01-16	FASTENER ENGINEERS INC. MODEL WR-01-16 WIRE DRAWING MACHINE S/N 1741970	🔒 Subscribe
			60 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			50 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			60 INCH DIA. WIRE PAYOFF CAROUSEL	🔒 Subscribe
			4-POST TRIM PRESS, 14 INCH X 15 INCH BETWEEN POSTS, 8 INCH DIA. RAM, ENCLOSURE	🔒 Subscribe
	FUJI ELECTRIC	FRENIC-MINI	102" X 8" ELEVATOR PARTS CONVEYOR WITH FUJI ELECTRIC FRENIC-MINI DRIVE	🔒 Subscribe
	FEDERAL PRESS CO.	NO. 4 OBI	FEDERAL PRESS CO. NO. 4 OBI MECHANICAL TRIM PRESS, 1/4 TO 1/2 INCH WIRE DIA., 1-1/4 TO 4 INCH SHANK RANGE, 4-1/2 INCH STROKE, 2 INCH RAM ADJUSTMENT, UP TO 100 PPM PRODUCTION RATE, 7.5 HP 900 RPM MOTOR, WITH UNIVERSAL FEEDER CO. VIBRATORY BOWL FEEDER	🔒 Subscribe
	WATERBURY FERREL	NO. 0	WATERBURY FERREL NO. 0 THREAD ROLLING MACHINE, 3/16 INCH MAX THREAD DIA., 1-1/2 INCH MAX THREAD LENGTH, 3-1/4 INCH LENGTH OF MOVING DIE FACE, 2-3/4 INCH LENGTH OF STATIONARY DIE FACE, 125 TO 150 PPM PRODUCTION RATE, 1 HP 1200 RPM MOTOR, WITH VIBRATORY BOWL FEEDER S/N: 12	🔒 Subscribe
	WATERBURY FERREL	NO. 10	WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE, 2" MAX THREAD LENGTH, 5" LENGTH OF MOVING DIE FACE, 4-1/4" LENGTH OF STATIONARY DIE FACE, 150 PPM PRODUCTION RATE, 3 HP MOTOR, WITH VIBRATORY BOWL FEEDER S/N: 12	🔒 Subscribe
	WATERBURY FERREL	NO. 1 1/4"	WATERBURY FERREL NO. 1 1/4" AUTO BOLT TRIMMER, 1/4" MAX TRIM & EXTRUDE WIRE DIA., 5/16" MAX DIA. HEX HEAD BOLT TRIM, 3/8" TO 2" SHANK LENGTH, 130 PPM PRODUCTION RATE WITH MIDWEST FEEDER VIBRATORY BOWL FEEDER S/N: 2	🔒 Subscribe
	WATERBURY FERREL	NO. 2	WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUDE, 1/2 INCH HEX HEAD BOLTS TRIM ONLY, 1/2 INCH TO 3 INCH SHANK LENGTH, UP TO 110 PPM PRODUCTION RATE, ANDERSON CONTROLS INC. PD SENSOR CONTROL, PARTS ELEVATOR CONVEYOR, VIBRATORY BOWL FEEDER, MACHINE NO. 1 S/N: S-67171 78 67706	🔒 Subscribe
	MICRO WELD	T20	MICRO WELD T20 WIRE WELDER	🔒 Subscribe
	H.P. NORLING	230RS	H.P. NORLING MODEL 230RS WIRE HEATER, 0.080 TO 0.425 INCH WIRE DIA. RANGE, 10 KVA, OUTPUT: 12/24V, INPUT: 230V, 60 HZ S/N 2073	🔒 Subscribe
	H.P. NORLING	60R	H.P. NORLING MODEL 60R WIRE HEATER, 1/16 INCH TO 5/16 INCH WIRE DIA. RANGE, 3.3 KVA, OUTPUT: 24V, INPUT: 480V, 60 HZ S/N: 2752	🔒 Subscribe
	NATIONAL MACHINERY	3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER	NATIONAL MACHINERY 3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER - ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 18631, MACHINE NO. 174	🔒 Subscribe
	FASTENER ENGINEERS	WR-01-16	FASTENER ENGINEERS WR-01-16 WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB. MACHINE NO. 3, S/N: 204	🔒 Subscribe
	SHUSTER		SHUSTER 1/4 INCH WIRE STRAIGHTENER	🔒 Subscribe
	NATIONAL MACHINERY	3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER	NATIONAL MACHINERY 3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER, 3/16" DIA. CUT-OFF, 1-1/4" DIE KICK-OUT, 225 PPM PRODUCTION RATE, 7-1/2 HP MOTOR, BUSHING CUT-OFF, SPLIT PUNCH BLOCK, ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 36827, MACHINE NO. 204	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 204	🔒 Subscribe
	RMG	34--034-01	RMG MODEL 34--034-01 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, 230V, 8.5A, 60 HZ, 3PH, MACHINE NO. 23 (SUPPLIED MACHINE NO. 150) S/N: 8303931	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 173	🔒 Subscribe
	SACMA	SP-11L	SACMA SP-11L 1/4" HIGH SPEED COLD HEADER, 6MM (1/4") MAX WIRE DIA., 50MM (2") MAX SHANK LENGTH, 70MM (2-3/4") MAX CUT-OFF LENGTH, 275 PPM MAX PRODUCTION RATE, SINGLE PLANE STRAIGHTENER, ANDERSON CONTROLS INC. PD SENSOR CONTROL, WEG CFW-11 VECTRUE INVERTER S/N: 41AG25	🔒 Subscribe
	SHUSTER	3/8"	SHUSTER 3/8" WIRE STRAIGHTENER S/N: 150	🔒 Subscribe
	FASTENER ENGINEERS	DH-190-250-24	WIRE DRAWING MACHINE, 5.9 HP, 24 INCH DIA. TORQUE HUB S/N: 1269941	🔒 Subscribe
1942	HILGELAND-RONSDORT	CH-4	1942 HILGELAND-RONSDORT MODEL CH-4 10MM COLD HEADER, 10MM DIE MAX HIGH TENSILE WIRE, 12MM DIA. MAX MILD STEEL WIRE, 130MM MAX SHANK LENGTH, 100 PPM PRODUCTION SPEED, 20 HP MOTOR, ANDERSON CONTROLS INC. PD SENSOR CONTROL S/N 1466	🔒 Subscribe
			3/8" WIRE STRAIGHTENER	🔒 Subscribe
	RMG	45-0546-87	RMG MODEL 45-0546-87 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ABB 7.5HP VFD, 230V, 15A, 60 HZ, 3PH S/N 96083895 MACHINE NO. 5, SUPPLIED MACHINE NO. 172	🔒 Subscribe
	WATERBURY	3/8" SDDS COLDER HEADER	WATERBURY 3/8" SDDS COLDER HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENGTH, 135 PPM PRODUCTION SPEED, 85-TON HEADING CAPACITY, ANDERSON CONTROLS INC. PD SENSOR CONTROL, 25 HP 1200 RPM MOTOR, NO. 80, MACHINE NO. 172 S/N: 167757	🔒 Subscribe
	WATERBURY FERREL	NO. 2	WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUDE, 1/2 INCH HEX HEAD BOLTS TRIM ONLY, 1/2 INCH TO 3 INCH SHANK LENGTH, UP TO 110 PPM PRODUCTION RATE, WITH VIBRATORY BOWL FEEDER S/N: 4	🔒 Subscribe
	WATERBURY FARREL	3/8" SDDS	WATERBURY FARREL 3/8" SDDS COLD HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENGTH, 135 PPM PRODUCTION SPEED, 85-TON HEADING CAPACITY, ANDERSON CONTROLS INC. PD SENSOR CONTROL, 25 HP 1200 RPM MOTOR, S/N 86174 NO. 20, MACHINE NO. 175	🔒 Subscribe
	NAKASHIMADA	TH3-6	1/4" NAKASHIMADA TH3-6 3 DIE 4 STATION, MAXIMUM WIRE DIAMETER: 0.25 (6MM), MAXIMUM CUT-OFF LENGTH: 2.75 (70MM), MAXIMUM PRODUCTION RATE: 80 TO 250 PPM, EQUIPPED WITH: BUSHING CUTOFF, MOTOR: 10 HP, FEED ROLL	🔒 Subscribe
	NAKASHIMADA	PF-1080	NAKASHIMADA PF-1080 3/8 INCH 2-DIE 3-BLOW COLD HEADER, 10MM MAX WIRE DIA., 100MM MAX CUTOFF LENGTH, 80MM MAX SHANK LENGTH, 130MM MAX TRANSFER LENGTH, 8MM 2ND DIE RELIEF STROKE, 15MM 1ST PKO STROKE, 35MM 2ND PKO STROKE, 15MM 3RD PKO STROKE, 50-100 PPM PRODUCTION SPEED, 30 HP MOTOR, CHIP CONVEYOR S/N: 850027	🔒 Subscribe
	NAKASHIMADA	PF-630	NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF LENGTH, 2.047" 1ST DIE MAX KICKOUT STROKE, 1.181" 2ND DIE MAX KICKOUT STROKE, 50-170 PPM PRODUCTION SPEED S/N: 90462	🔒 Subscribe
	RMG	45-0546-86	RMG MODEL 45-0546-86 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ALLEN BRADLEY POWERFLEX 4 5HP VFD, 230V, 15A, 60 HZ, 3PH, MACHINE NO. 14, SUPPLIED MACHINE NO. 112 S/N: 96093897	🔒 Subscribe
			WIRE DRAWING MACHINE, 3HP LENZE AC TECH SMVECTOR DRIVE, 20 INCH DIA. TORQUE HUB	🔒 Subscribe
	NAKASHIMADA	PF-860	NAKASHIMADA PF-860 5/16" COLD HEADER, 8MM MAX WIRE DIA., 80MM MAX CUT-OFF LENGTH, 115MM 1ST DIE MAX KICKOUT STROKE, 60MM 2ND DIE MAX KICKOUT STROKE, 50 TO 120 PPM PRODUCTION RATE, PKO, AC TECH TYPE M14400D 40HP MC SERIES INTELLIGENT DRIVE VFD, MACHINE NO. 115 S/N: 76092	🔒 Subscribe
	NAKASHIMADA	PF-630	NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF LENGTH, 2.047" 1ST DIE MAX KICKOUT STROKE, 1.181" 2ND DIE MAX KICKOUT STROKE, 50-170 PPM PRODUCTION SPEED S/N: 830301 S	🔒 Subscribe
	THEMAC	J40	THEMAC MODEL J40 MEDIUM DUTY EXTERNAL LATHE GRINDER, 10,000 RPM, 115V S/N: 5916	🔒 Subscribe
			WOODEN A-FRAME STAND WITH LARGE QUANTITY OF ASSORTED 5C COLLETS	🔒 Subscribe
			(25) 5C COLLETS WITH STAND	🔒 Subscribe
	ATLAS	10" BENCH LATHE	ATLAS 10" BENCH LATHE, 10" MAX SWING, 24" BETWEEN CENTERS, 3/4" HOLE THRU SPINDLE, QUICK CHANGE GEAR BOX, 6" 6-JAW CHUCK, TAIL STOCK	🔒 Subscribe
	HARDINGE	DV-59	HARDINGE MODEL DV-59 PRECISION LATHE, 9 INCH SWING OVER BED, 18 INCH DISTANCE BETWEEN CENTERS, 5C COLLET SPINDLE, 1 INCH HOLE THRU SPINDLE, 230-3,000 SPINDLE RPM, TAIL STOCK, ASSORTED 5C COLLETS, 1HP 220V, 3PH	🔒 Subscribe
	LEBLOND MAKINO	SERVO SHIFT 15	LEBLOND MAKINO SERVO SHIFT 15 ENGINE LATHE, 15 INCH MAX SWING, 32 INCH BETWEEN CENTERS, 10 INCH 3-JAW CHUCK, 2-1/4 INCH HOLE THRU SPINDLE, 45-1800 SPINDLE RPM, DOVE-TAIL TOOL POST, TAIL STOCK, DIGIPAC 6 DRO S/N: 15C-647	🔒 Subscribe
	HARDINGE	TFB-H	HARDINGE MODEL TFB-H PRECISION LATHE, 8 INCH SWING OVER CROSS SLIDE, 18 INCH DISTANCE BETWEEN CENTERS, 5C COLLET SPINDLE, 1 INCH HOLE THRU SPINDLE, 125-3,000 SPINDLE RPM, POWER FEED CARRIAGE CROSS SLIDE, TAIL STOCK, 5 INCH 3-JAW CHUCK, ASSORTED 5C COLLETS, 1.5 HP, 230V, 3PH	🔒 Subscribe
	EVERETT	8" ABRASIVE CHOP SAW	EVERETT 8" ABRASIVE CHOP SAW, 2HP, 3450 RPM, 115/208-230V, 1PH	🔒 Subscribe
	RIDGID	9163.1011R	14 INCH ABRASIVE CHOP SAW, 10 HP, 208-230/460V, 3PH S/N: 9060.00003	🔒 Subscribe

KEARNEY & TRECKER H NO. 2

METALWORKING & FABRICATION EQUIPMENT

KEARNEY & TRECKER MODEL H NO. 2 VERTICAL MILLING MACHINE S/N: 13-3612...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WIRE WELDER WITH 3 INCH BENCH VISE...

Hammer Price: 🔒

NEW LONDON ENGINEERING T3 2-1/2" 741

MISC

NEW LONDON ENGINEERING T3 2-1/2 INCH 741 CHIP CONVEYOR S/N: 92-30750-2...

Hammer Price: 🔒

WATERBURY FERREL NO. 10

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE S/N: 112...

Hammer Price: 🔒

FASTENER ENGINEERS INC. WR-01-16

METALWORKING & FABRICATION EQUIPMENT

FASTENER ENGINEERS INC. MODEL WR-01-16 WIRE DRAWING MACHINE S/N 1741970...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

60 INCH DIA. WIRE PAYOFF CAROUSEL...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

50 INCH DIA. WIRE PAYOFF CAROUSEL...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

60 INCH DIA. WIRE PAYOFF CAROUSEL...

Hammer Price: 🔒

PRESSES & FORMING

4-POST TRIM PRESS, 14 INCH X 15 INCH BETWEEN POSTS, 8 INCH DIA. RAM, ENCLOSURE...

Hammer Price: 🔒

FUJI ELECTRIC FRENIC-MINI

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

102" X 8" ELEVATOR PARTS CONVEYOR WITH FUJI ELECTRIC FRENIC-MINI DRIVE...

Hammer Price: 🔒

FEDERAL PRESS CO. NO. 4 OBI

PRESSES & FORMING

FEDERAL PRESS CO. NO. 4 OBI MECHANICAL TRIM PRESS, 1/4 TO 1/2 INCH WIRE DIA., 1-1/4 TO 4 INCH SHANK ...

Hammer Price: 🔒

WATERBURY FERREL NO. 0

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FERREL NO. 0 THREAD ROLLING MACHINE, 3/16 INCH MAX THREAD DIA., 1-1/2 INCH MAX THREAD LENG...

Hammer Price: 🔒

WATERBURY FERREL NO. 10

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FERREL NO. 10 THREAD ROLLING MACHINE, 2" MAX THREAD LENGTH, 5" LENGTH OF MOVING DIE FACE, ...

Hammer Price: 🔒

WATERBURY FERREL NO. 1 1/4"

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FERREL NO. 1 1/4" AUTO BOLT TRIMMER, 1/4" MAX TRIM & EXTRUDE WIRE DIA., 5/16" MAX DIA. HEX...

Hammer Price: 🔒

WATERBURY FERREL NO. 2

PACKAGING EQUIPMENT

WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUD...

Hammer Price: 🔒

MICRO WELD T20

WELDING & CUTTING

MICRO WELD T20 WIRE WELDER...

Hammer Price: 🔒

H.P. NORLING 230RS

MISC

H.P. NORLING MODEL 230RS WIRE HEATER, 0.080 TO 0.425 INCH WIRE DIA. RANGE, 10 KVA, OUTPUT: 12/24V, I...

Hammer Price: 🔒

H.P. NORLING 60R

MISC

H.P. NORLING MODEL 60R WIRE HEATER, 1/16 INCH TO 5/16 INCH WIRE DIA. RANGE, 3.3 KVA, OUTPUT: 24V, IN...

Hammer Price: 🔒

NATIONAL MACHINERY 3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER

METALWORKING & FABRICATION EQUIPMENT

NATIONAL MACHINERY 3/8" DOUBLE-STROKE SOLID DIE LONG STROKE COLD HEADER - ANDERSON CONTROLS INC. PD ...

Hammer Price: 🔒

FASTENER ENGINEERS WR-01-16

METALWORKING & FABRICATION EQUIPMENT

FASTENER ENGINEERS WR-01-16 WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB. MACHINE NO. 3, S/N: 204...

Hammer Price: 🔒

SHUSTER

METALWORKING & FABRICATION EQUIPMENT

SHUSTER 1/4 INCH WIRE STRAIGHTENER...

Hammer Price: 🔒

NATIONAL MACHINERY 3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER

METALWORKING & FABRICATION EQUIPMENT

NATIONAL MACHINERY 3/16" HIGH SPEED DOUBLE-STROKE SOLID DIE COLD HEADER, 3/16" DIA. CUT-OFF, 1-1/4" ...

Hammer Price: 🔒

SHUSTER 3/8"

METALWORKING & FABRICATION EQUIPMENT

SHUSTER 3/8" WIRE STRAIGHTENER S/N: 204...

Hammer Price: 🔒

RMG 34--034-01

METALWORKING & FABRICATION EQUIPMENT

RMG MODEL 34--034-01 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, 230V, 8.5A, 60 HZ, 3PH,...

Hammer Price: 🔒

SHUSTER 3/8"

METALWORKING & FABRICATION EQUIPMENT

SHUSTER 3/8" WIRE STRAIGHTENER S/N: 173...

Hammer Price: 🔒

SACMA SP-11L

METALWORKING & FABRICATION EQUIPMENT

SACMA SP-11L 1/4" HIGH SPEED COLD HEADER, 6MM (1/4") MAX WIRE DIA., 50MM (2") MAX SHANK LENGTH, 70MM...

Hammer Price: 🔒

SHUSTER 3/8"

METALWORKING & FABRICATION EQUIPMENT

SHUSTER 3/8" WIRE STRAIGHTENER S/N: 150...

Hammer Price: 🔒

FASTENER ENGINEERS DH-190-250-24

METALWORKING & FABRICATION EQUIPMENT

WIRE DRAWING MACHINE, 5.9 HP, 24 INCH DIA. TORQUE HUB S/N: 1269941...

Hammer Price: 🔒

1942 HILGELAND-RONSDORT CH-4

METALWORKING & FABRICATION EQUIPMENT

1942 HILGELAND-RONSDORT MODEL CH-4 10MM COLD HEADER, 10MM DIE MAX HIGH TENSILE WIRE, 12MM DIA. MAX M...

Hammer Price: 🔒

MISC

3/8" WIRE STRAIGHTENER...

Hammer Price: 🔒

RMG 45-0546-87

METALWORKING & FABRICATION EQUIPMENT

RMG MODEL 45-0546-87 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ABB 7.5HP VFD, 230V, 15...

Hammer Price: 🔒

WATERBURY 3/8" SDDS COLDER HEADER

METALWORKING & FABRICATION EQUIPMENT

WATERBURY 3/8" SDDS COLDER HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENGTH, 1...

Hammer Price: 🔒

WATERBURY FERREL NO. 2

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FERREL NO. 2 AUTO BOLT TRIMMER, 3/8 INCH WIRE DIA., UP TO 7/16 INCH HEX HEAD TRIM & EXTRUD...

Hammer Price: 🔒

WATERBURY FARREL 3/8" SDDS

METALWORKING & FABRICATION EQUIPMENT

WATERBURY FARREL 3/8" SDDS COLD HEADER, 3/8" DIA., 2-1/2" MAX SHANK LENGTH, 4" MAX WIRE CUT-OFF LENG...

Hammer Price: 🔒

NAKASHIMADA TH3-6

METALWORKING & FABRICATION EQUIPMENT

1/4" NAKASHIMADA TH3-6 3 DIE 4 STATION, MAXIMUM WIRE DIAMETER: 0.25 (6MM), MAXIMUM CUT-OFF LENGTH: 2...

Hammer Price: 🔒

NAKASHIMADA PF-1080

METALWORKING & FABRICATION EQUIPMENT

NAKASHIMADA PF-1080 3/8 INCH 2-DIE 3-BLOW COLD HEADER, 10MM MAX WIRE DIA., 100MM MAX CUTOFF LENGTH, ...

Hammer Price: 🔒

NAKASHIMADA PF-630

METALWORKING & FABRICATION EQUIPMENT

NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF ...

Hammer Price: 🔒

RMG 45-0546-86

METALWORKING & FABRICATION EQUIPMENT

RMG MODEL 45-0546-86 AUTODRAW WIRE DRAWING MACHINE, 20 INCH DIA. TORQUE HUB, ALLEN BRADLEY POWERFLEX...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WIRE DRAWING MACHINE, 3HP LENZE AC TECH SMVECTOR DRIVE, 20 INCH DIA. TORQUE HUB...

Hammer Price: 🔒

NAKASHIMADA PF-860

METALWORKING & FABRICATION EQUIPMENT

NAKASHIMADA PF-860 5/16" COLD HEADER, 8MM MAX WIRE DIA., 80MM MAX CUT-OFF LENGTH, 115MM 1ST DIE MAX ...

Hammer Price: 🔒

NAKASHIMADA PF-630

METALWORKING & FABRICATION EQUIPMENT

NAKASHIMADA PF-630 2-DIE 3-BLOW COLD HEADER, 6MM (0.0237") MAX WIRE DIA., 30MM (1.575") MAX CUT-OFF ...

Hammer Price: 🔒

THEMAC J40

METALWORKING & FABRICATION EQUIPMENT

THEMAC MODEL J40 MEDIUM DUTY EXTERNAL LATHE GRINDER, 10,000 RPM, 115V S/N: 5916...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WOODEN A-FRAME STAND WITH LARGE QUANTITY OF ASSORTED 5C COLLETS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

(25) 5C COLLETS WITH STAND...

Hammer Price: 🔒

ATLAS 10" BENCH LATHE

METALWORKING & FABRICATION EQUIPMENT

ATLAS 10" BENCH LATHE, 10" MAX SWING, 24" BETWEEN CENTERS, 3/4" HOLE THRU SPINDLE, QUICK CHANGE GEAR...

Hammer Price: 🔒

HARDINGE DV-59

METALWORKING & FABRICATION EQUIPMENT

HARDINGE MODEL DV-59 PRECISION LATHE, 9 INCH SWING OVER BED, 18 INCH DISTANCE BETWEEN CENTERS, 5C CO...

Hammer Price: 🔒

LEBLOND MAKINO SERVO SHIFT 15

METALWORKING & FABRICATION EQUIPMENT

LEBLOND MAKINO SERVO SHIFT 15 ENGINE LATHE, 15 INCH MAX SWING, 32 INCH BETWEEN CENTERS, 10 INCH 3-JA...

Hammer Price: 🔒

HARDINGE TFB-H

METALWORKING & FABRICATION EQUIPMENT

HARDINGE MODEL TFB-H PRECISION LATHE, 8 INCH SWING OVER CROSS SLIDE, 18 INCH DISTANCE BETWEEN CENTER...

Hammer Price: 🔒

EVERETT 8" ABRASIVE CHOP SAW

METALWORKING & FABRICATION EQUIPMENT

EVERETT 8" ABRASIVE CHOP SAW, 2HP, 3450 RPM, 115/208-230V, 1PH...

Hammer Price: 🔒

RIDGID 9163.1011R

METALWORKING & FABRICATION EQUIPMENT

14 INCH ABRASIVE CHOP SAW, 10 HP, 208-230/460V, 3PH S/N: 9060.00003...

Hammer Price: 🔒

1 2 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Complete Closure of American Jebco Corp

Save to Project Folder

Print Options

Save to Project Folder