MultiFacility Surplus Plastics Processing Equipment

Revelation Auctions

Category: MISC

Total Lots: 271

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 271 lots

Year	Make	Model	Lot Description	Hammer Price
	XALOY	WRP12I	XALOY WRP12I HORIZONTAL WATER RING PELLETIZER SYSTEM. INCLUDES 60 HOLE DIE, 4 BLADE CUTTER ASSEMBLY, WATER TRAY AND PUMP, HEAT EXCHANGER AND INSULATED SPIN DRYER, CONTROL PANEL W/ TOUCH SCREEN XALOY · WRP12I	🔒 Subscribe
2011	LANTAI	SHJ-72	2011 LANTAI SHJ-72 72MM CO-ROTATING TWIN SCREEN EXTRUDER. 32:1 L/D, SIDE FEEDER, 325KW DRIVE (ITALY) GEARBOX MFG. 9 ZONE ELECTRICALLY HEATED, WATER COOLED INCLUDING CLOSED LOOP WATER SYSTEM. VENTED BARREL INCLUDING VACUUM PUMP. ALSO INCLUDES SIDE FEEDER. 1.5 KW DRIVE - FULL CONTROL PANEL AND DRIVE. MAIN DRIVE IS 325KW DC. ALSO INCLUDES SPARE PARTS 2011 · LANTAI · SHJ-72	🔒 Subscribe
	ECC, INC.	VALVE BAGGER SCREW FEEDER	ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CAPACITY W/ FEEDING HOPPER AND STAND ECC, INC. · VALVE BAGGER SCREW FEEDER	🔒 Subscribe
	ECC, INC.		ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CAPACITY W/ FEEDING HOPPER AND STAND ECC, INC.	🔒 Subscribe
	BERSTORFF/GALA	TWS 120	BERSTORFF/GALA TWS 120 WATER RING PELLETIZING SYSTEM. 120 GPM TANK AND SPIN DRYER WITH CONTROLS. WATER RING PELLETIZER SYSTEM INCLUDES: BERSTORFF VERTICAL CUTTING CHAMBER AND DIE, WATER PALLET TABLE W/ PUMP, PLATE HEAT EXCHANGER. INCLUDES GALA MODE TWS 120 GPM WATER SYSTEM W/ GALA SPIN DRYER W/ BLOWER. CONTROL PANEL INCLUDED. BERSTORFF/GALA · TWS 120	🔒 Subscribe
	YALE	6000 LB	YALE 6000 LB FORKLIFT WIDTH OVER LOAD TIRES: 44.5" BACK TILT: 5 STEER TIRES: SOLID MAX CAPACITY: 6000 LBS MAX HEIGHT: 190" HOURS: 3,470.6 YALE · 6000 LB	🔒 Subscribe
	CHAMPION	15X22	CHAMPION 15X22 HAMMERMILL CHAMPION · 15X22	🔒 Subscribe
1979	BERSTORFF	ZE90	1979 BERSTORFF ZE90 90MM CO ROTATING TWIN SCREW, 28/1 LD RATIO, 400 HP DC DRIVE - BERSTORFF MODEL ZE90 90MM TWIN SCREW COMPOUNDING EXTRUDER 28:1 L/D RATIO 7 BARREL. BARREL ELECTRICALLY HEATED, WATER COOLED BARRELS. (1) VENTED, (3) OPEN BARREL OPTIONS CLOSED LOOP WATER SYSTEM TEMPERATURE DRIVE CONTROL PANEL 400 HP DC DRIVE 1979 · BERSTORFF · ZE90	🔒 Subscribe
	CONAIR	EP-2-W30	CONAIR EP-2-W30 30 TON PORTABLE CHILLER CONAIR · EP-2-W30	🔒 Subscribe
	EMPRESS	JMDT 312D	EMPRESS JMDT 312D MAX. 115 LB BAG LOADER. INCLUDES HOPPER AND FRAME. LAST RUNNING 50 LB BAG. FOOT CONTROL SWITCH EMPRESS · JMDT 312D	🔒 Subscribe
2002	NISSEI	TH60RE	2002 NISSEI TH60RE 60 TON 1.1 OZ VERTICAL INJECTION MOLDING MACHINE S/N: T06W808 WITH AEC CHILLER MODEL: PCA-100 SN: 51E0552 2002 · NISSEI · TH60RE	🔒 Subscribe
	HIGHLIGHT INDUSTRIES	PREDATOR SS	HIGHLIGHT INDUSTRIES PREDATOR SS PALLET STRETCH WRAPPER WITH ROTATING BASE, W/ CONTROLS HIGHLIGHT INDUSTRIES · PREDATOR SS	🔒 Subscribe
	KICE	CKS-78 LH	KICE CKS-78 LH CYCLONE SYSTEM KICE · CKS-78 LH	🔒 Subscribe
	FEINMECHANIK MICHAEL DECKEL	SO	FEINMECHANIK MICHAEL DECKEL SO SINGLE LIP CUTTER GRINDER WITH WORKBENCH AND CONTENTS S/N: 95-25881 FEINMECHANIK MICHAEL DECKEL · SO	🔒 Subscribe
	CINCINNATI MILACRON	E50-D-375	CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE SINGLE OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4" PLATEN, 16-1/4"X16-1/4" BETWEEN TIE BARS, OVERHEAD HOPPER, CONAIR FRANKLIN ELECTRIC VACUUM LOADER AND CONTROLLER, BARBER COLEMAN AT-PLUS TEMPERATURE CONTROLLERS MODEL: E50-S-500 S/N: B54A0194001 CINCINNATI MILACRON · E50-D-375	🔒 Subscribe
	ROCHELEAU TOOL & DIE	R-4	ROCHELEAU TOOL & DIE R-4 BLOW MOLDING MACHINE TOP AND BOTTOM INJECTION, WITH HOPPER, DME MFPIG HOT RUNNER S/N: R4-89-25 ROCHELEAU TOOL & DIE · R-4	🔒 Subscribe
	ROCHELEAU	R3S 1-1/2ACC	ROCHELEAU R3S 1-1/2ACC BLOW MOLDING MACHINE TOP INJECTION, WITH CONAIR FRANKLIN QS01 ELECTRIC VACUUM LOADER, HOPPER S/N: R3S79-108 ROCHELEAU · R3S 1-1/2ACC	🔒 Subscribe
	CINCINNATI MILACRON	E50-D-375	CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE DUAL OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4" PLATEN, 16-1/4"X16-1/4" BETWEEN TIE BARS, OVERHEAD HOPPER, NOVATEC VL ELECTRIC VACUUM LOADER AND CONTROLLER, BARBER COLEMAN AT-PLUS TEMPERATURE CONTROLLERS MODEL: E50-D-375 S/N: B54A0193002 CINCINNATI MILACRON · E50-D-375	🔒 Subscribe
	TOYOTA	FG-20	TOYOTA FG-20 2000-KG LP FORK TRUCK 2-STAGE MAST, 42" FORKS, PNEUMATIC TIRES, REBUILT ENGINE, RECENTLY REPLACED ALTERNATOR AND BATTERY S/N: 11907 TOYOTA · FG-20	🔒 Subscribe
	GOODWAY MACHINE CORP	GW-1440	GOODWAY MACHINE CORP GW-1440 ENGINE LATHE 14" SWING, 40" BETWEEN CENTERS, 55-1800RPM, 1-1/2" HOLE THROUGH SPINDLE, 8" 3-JAW CHUCK, KDK DOVETAIL TOOLHOLDER, STEADY REST AND TAILSTOCK S/N: 96660 GOODWAY MACHINE CORP · GW-1440	🔒 Subscribe
	WHITWORTH	T-190	WHITWORTH T-190 ENGINE LATHE APPROX. 16" SWING, 56" BETWEEN CENTERS, 2" HOLE THROUGH SPINDLE, 40-2000RPM, 10" 3-JAW CHUCK, KDK DOVETAIL TOOLHOLDER, STEADY REST, AND TAILSTOCK WHITWORTH · T-190	🔒 Subscribe
1992	GARDNER-DENVER	EBERFD	1992 GARDNER-DENVER EBERFD AIR COMPRESSOR SN: M69006 COMPRESSOR MOTOR NOMINAL HP 25 230V, 60 HZ, PH 3 1992 · GARDNER-DENVER · EBERFD	🔒 Subscribe
	LAGUN REPUBLIC	FT.1	LAGUN REPUBLIC FT.1 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE, 5" QUILL STROKE, R8 SPINDLE, 55-2940RPM, TELEDYNE GURLEY PATHFINDER DRO, 2-HP, 220/440V 3PH LAGUN REPUBLIC · FT.1	🔒 Subscribe
	EMI CORP.	TCL-12-8-30	EMI CORP. TCL-12-8-30 INCLINE EXIT PART CONVEYORS EMI CORP. · TCL-12-8-30	🔒 Subscribe
	KENT	KGS-250AH	KENT KGS-250AH 8"X20" AUTOMATIC HYDRAULIC SURFACE GRINDER 8"X20" KANETSU ELECTROMAGNETIC CHUCK AND CONTROLLER, COOLANT SYSTEM, HYDRAULIC POWER UNIT S/N: 880464-1 KENT · KGS-250AH	🔒 Subscribe
			32 HOLE STRAND DIE	🔒 Subscribe
	BALDOR	100 HP 444T	BALDOR 100 HP 444T FRAME MOTOR BALDOR · 100 HP 444T	🔒 Subscribe
	BALDOR	100 HP 444T	BALDOR 100 HP 444T FRAME MOTOR BALDOR · 100 HP 444T	🔒 Subscribe
			PLASTICS GRANULATOR 20 HP - GRANULATOR 20"X12" INLET, 20-HP, 460V	🔒 Subscribe
1985	IPS	YFTM-2	1985 IPS YFTM-2 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE WITH SERVO TABLE AND SADDLE POWER FEED, 5" QUILL STROKE, R8 SPINDLE, 90-2780RPM, SARGON 612A-1 DRO, 2-HP, 220/440V 3PH 1985 · IPS · YFTM-2	🔒 Subscribe
	BALDOR	100 HP 444T FRAME MOTOR	BALDOR 100 HP 444T FRAME MOTOR BALDOR · 100 HP 444T FRAME MOTOR	🔒 Subscribe
	AEC		AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS AEC	🔒 Subscribe
	BALDOR	100 HP 444T FRAME	BALDOR 100 HP 444T FRAME MOTOR BALDOR · 100 HP 444T FRAME	🔒 Subscribe
	BALDOR	100 HP 444T FRAME MOTOR	BALDOR 100 HP 444T FRAME MOTOR BALDOR · 100 HP 444T FRAME MOTOR	🔒 Subscribe
	ACCURATE	2	ACCURATE 2 SCREW FEEDER AND CONTROL - ACCURATE APPROX 2" SCREW DIAMETER, RATED 600 KG/HR. W/ AGITATED HOPPER, WITH PREMIER HOPPER LOADER, WITH DIGITAL CONTROLLER. LAST FEEDING SIDE FEEDER ON TURN SCREW ACCURATE · 2	🔒 Subscribe
	PORTA-COOL	PAC2K3633	PORTA-COOL PAC2K3633 36" 3 SPEED FAN PORTA-COOL · PAC2K3633	🔒 Subscribe
1984	ARBURG	305-210-700	1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APPROX. 17"X12-1/4" PLATEN, 12"X 5-1/4" BETWEEN TIE BARS, WITH OVERHEAD HOPPER, CONAIR VORTEC EX-150 ROBOT AND CONTROLLER S/N: 127122 1984 · ARBURG · 305-210-700	🔒 Subscribe
1984	ARBURG	305-210-700	1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APPROX. 17"X12-1/4" PLATEN, 12"X5-1/4" BETWEEN TIE BARS, WITH OVERHEAD HOPPER, CONAIR VORTEC EX-150 ROBOT AND CONTROLLER (OUT OF SERVICE, PARTS MACHINE) S/N: 127137 1984 · ARBURG · 305-210-700	🔒 Subscribe
	BALDOR	444T	BALDOR 444T 100 HP MOTOR BALDOR · 444T	🔒 Subscribe
	HAPMAN	BAG DUMPING STATION	HAPMAN BAG DUMPING STATION C/S 40" W X 36" DEEP W/ DUST BLOWER AND FILTER W/ CONTROLS HAPMAN · BAG DUMPING STATION	🔒 Subscribe
	IMS		IMS BULK BIN STACKABLE QUANITY 10 - IMS CARBON STEEL BINS 43" X 43" X 20" ST. SIDE W/ 24" CONE STACKABLE 8 HAVE HINGED COVERS 2 NO COVERS QTY 10 TOTAL APPROX 1000 LB CAPACITY IMS	🔒 Subscribe
	FRIEDRICH DECKEL	KF12	FRIEDRICH DECKEL KF12 UNIVERSAL COPY MILLING MACHINE 60-5000 RPM SPINDLE SPEED S/N: 3411 FRIEDRICH DECKEL · KF12	🔒 Subscribe
	FRIEDRICH DECKEL	GK12	FRIEDRICH DECKEL GK12 UNIVERSAL ENGRAVING AND COPY MILLING MACHINE 1600-20,000 RPM SPINDLE SPEED S/N: 2347 FRIEDRICH DECKEL · GK12	🔒 Subscribe
2003	K-TRON	SODER K2MVT60	2003 K-TRON SODER K2MVT60 TWIN SCREW FEEDER 2003 · K-TRON · SODER K2MVT60	🔒 Subscribe
			2-DOOR AND 1-DOOR STORAGE CABINETS WITH ASSORTED DECKEL PARTS, ACCESSORIES AND CLAMPS	🔒 Subscribe
	SOUTHWORTH	TILT 35	SOUTHWORTH TILT 35 TOTE TILTER. PORTABLE W/ CONTROL SOUTHWORTH · TILT 35	🔒 Subscribe
			SPOOLS OF ELECTRICAL WIRE	🔒 Subscribe
	AEC		AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS AEC	🔒 Subscribe
			PALLET ROTATING ASSEMBLY W/ FOOT SWITCH	🔒 Subscribe
	CUMBERLAND	8X12	CUMBERLAND 8X12 GRANULATOR 230V 3PH MODEL: 8X12 3KN S/N: 72150-85508 CUMBERLAND · 8X12	🔒 Subscribe

Year	Make	Model	Description	Price
	XALOY	WRP12I	XALOY WRP12I HORIZONTAL WATER RING PELLETIZER SYSTEM. INCLUDES 60 HOLE DIE, 4 BLADE CUTTER ASSEMBLY, WATER TRAY AND PUMP, HEAT EXCHANGER AND INSULATED SPIN DRYER, CONTROL PANEL W/ TOUCH SCREEN	🔒 Subscribe
2011	LANTAI	SHJ-72	2011 LANTAI SHJ-72 72MM CO-ROTATING TWIN SCREEN EXTRUDER. 32:1 L/D, SIDE FEEDER, 325KW DRIVE (ITALY) GEARBOX MFG. 9 ZONE ELECTRICALLY HEATED, WATER COOLED INCLUDING CLOSED LOOP WATER SYSTEM. VENTED BARREL INCLUDING VACUUM PUMP. ALSO INCLUDES SIDE FEEDER. 1.5 KW DRIVE - FULL CONTROL PANEL AND DRIVE. MAIN DRIVE IS 325KW DC. ALSO INCLUDES SPARE PARTS	🔒 Subscribe
	ECC, INC.	VALVE BAGGER SCREW FEEDER	ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CAPACITY W/ FEEDING HOPPER AND STAND	🔒 Subscribe
	ECC, INC.		ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CAPACITY W/ FEEDING HOPPER AND STAND	🔒 Subscribe
	BERSTORFF/GALA	TWS 120	BERSTORFF/GALA TWS 120 WATER RING PELLETIZING SYSTEM. 120 GPM TANK AND SPIN DRYER WITH CONTROLS. WATER RING PELLETIZER SYSTEM INCLUDES: BERSTORFF VERTICAL CUTTING CHAMBER AND DIE, WATER PALLET TABLE W/ PUMP, PLATE HEAT EXCHANGER. INCLUDES GALA MODE TWS 120 GPM WATER SYSTEM W/ GALA SPIN DRYER W/ BLOWER. CONTROL PANEL INCLUDED.	🔒 Subscribe
	YALE	6000 LB	YALE 6000 LB FORKLIFT WIDTH OVER LOAD TIRES: 44.5" BACK TILT: 5 STEER TIRES: SOLID MAX CAPACITY: 6000 LBS MAX HEIGHT: 190" HOURS: 3,470.6	🔒 Subscribe
	CHAMPION	15X22	CHAMPION 15X22 HAMMERMILL	🔒 Subscribe
1979	BERSTORFF	ZE90	1979 BERSTORFF ZE90 90MM CO ROTATING TWIN SCREW, 28/1 LD RATIO, 400 HP DC DRIVE - BERSTORFF MODEL ZE90 90MM TWIN SCREW COMPOUNDING EXTRUDER 28:1 L/D RATIO 7 BARREL. BARREL ELECTRICALLY HEATED, WATER COOLED BARRELS. (1) VENTED, (3) OPEN BARREL OPTIONS CLOSED LOOP WATER SYSTEM TEMPERATURE DRIVE CONTROL PANEL 400 HP DC DRIVE	🔒 Subscribe
	CONAIR	EP-2-W30	CONAIR EP-2-W30 30 TON PORTABLE CHILLER	🔒 Subscribe
	EMPRESS	JMDT 312D	EMPRESS JMDT 312D MAX. 115 LB BAG LOADER. INCLUDES HOPPER AND FRAME. LAST RUNNING 50 LB BAG. FOOT CONTROL SWITCH	🔒 Subscribe
2002	NISSEI	TH60RE	2002 NISSEI TH60RE 60 TON 1.1 OZ VERTICAL INJECTION MOLDING MACHINE S/N: T06W808 WITH AEC CHILLER MODEL: PCA-100 SN: 51E0552	🔒 Subscribe
	HIGHLIGHT INDUSTRIES	PREDATOR SS	HIGHLIGHT INDUSTRIES PREDATOR SS PALLET STRETCH WRAPPER WITH ROTATING BASE, W/ CONTROLS	🔒 Subscribe
	KICE	CKS-78 LH	KICE CKS-78 LH CYCLONE SYSTEM	🔒 Subscribe
	FEINMECHANIK MICHAEL DECKEL	SO	FEINMECHANIK MICHAEL DECKEL SO SINGLE LIP CUTTER GRINDER WITH WORKBENCH AND CONTENTS S/N: 95-25881	🔒 Subscribe
	CINCINNATI MILACRON	E50-D-375	CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE SINGLE OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4" PLATEN, 16-1/4"X16-1/4" BETWEEN TIE BARS, OVERHEAD HOPPER, CONAIR FRANKLIN ELECTRIC VACUUM LOADER AND CONTROLLER, BARBER COLEMAN AT-PLUS TEMPERATURE CONTROLLERS MODEL: E50-S-500 S/N: B54A0194001	🔒 Subscribe
	ROCHELEAU TOOL & DIE	R-4	ROCHELEAU TOOL & DIE R-4 BLOW MOLDING MACHINE TOP AND BOTTOM INJECTION, WITH HOPPER, DME MFPIG HOT RUNNER S/N: R4-89-25	🔒 Subscribe
	ROCHELEAU	R3S 1-1/2ACC	ROCHELEAU R3S 1-1/2ACC BLOW MOLDING MACHINE TOP INJECTION, WITH CONAIR FRANKLIN QS01 ELECTRIC VACUUM LOADER, HOPPER S/N: R3S79-108	🔒 Subscribe
	CINCINNATI MILACRON	E50-D-375	CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE DUAL OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4" PLATEN, 16-1/4"X16-1/4" BETWEEN TIE BARS, OVERHEAD HOPPER, NOVATEC VL ELECTRIC VACUUM LOADER AND CONTROLLER, BARBER COLEMAN AT-PLUS TEMPERATURE CONTROLLERS MODEL: E50-D-375 S/N: B54A0193002	🔒 Subscribe
	TOYOTA	FG-20	TOYOTA FG-20 2000-KG LP FORK TRUCK 2-STAGE MAST, 42" FORKS, PNEUMATIC TIRES, REBUILT ENGINE, RECENTLY REPLACED ALTERNATOR AND BATTERY S/N: 11907	🔒 Subscribe
	GOODWAY MACHINE CORP	GW-1440	GOODWAY MACHINE CORP GW-1440 ENGINE LATHE 14" SWING, 40" BETWEEN CENTERS, 55-1800RPM, 1-1/2" HOLE THROUGH SPINDLE, 8" 3-JAW CHUCK, KDK DOVETAIL TOOLHOLDER, STEADY REST AND TAILSTOCK S/N: 96660	🔒 Subscribe
	WHITWORTH	T-190	WHITWORTH T-190 ENGINE LATHE APPROX. 16" SWING, 56" BETWEEN CENTERS, 2" HOLE THROUGH SPINDLE, 40-2000RPM, 10" 3-JAW CHUCK, KDK DOVETAIL TOOLHOLDER, STEADY REST, AND TAILSTOCK	🔒 Subscribe
1992	GARDNER-DENVER	EBERFD	1992 GARDNER-DENVER EBERFD AIR COMPRESSOR SN: M69006 COMPRESSOR MOTOR NOMINAL HP 25 230V, 60 HZ, PH 3	🔒 Subscribe
	LAGUN REPUBLIC	FT.1	LAGUN REPUBLIC FT.1 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE, 5" QUILL STROKE, R8 SPINDLE, 55-2940RPM, TELEDYNE GURLEY PATHFINDER DRO, 2-HP, 220/440V 3PH	🔒 Subscribe
	EMI CORP.	TCL-12-8-30	EMI CORP. TCL-12-8-30 INCLINE EXIT PART CONVEYORS	🔒 Subscribe
	KENT	KGS-250AH	KENT KGS-250AH 8"X20" AUTOMATIC HYDRAULIC SURFACE GRINDER 8"X20" KANETSU ELECTROMAGNETIC CHUCK AND CONTROLLER, COOLANT SYSTEM, HYDRAULIC POWER UNIT S/N: 880464-1	🔒 Subscribe
			32 HOLE STRAND DIE	🔒 Subscribe
	BALDOR	100 HP 444T	BALDOR 100 HP 444T FRAME MOTOR	🔒 Subscribe
	BALDOR	100 HP 444T	BALDOR 100 HP 444T FRAME MOTOR	🔒 Subscribe
			PLASTICS GRANULATOR 20 HP - GRANULATOR 20"X12" INLET, 20-HP, 460V	🔒 Subscribe
1985	IPS	YFTM-2	1985 IPS YFTM-2 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE WITH SERVO TABLE AND SADDLE POWER FEED, 5" QUILL STROKE, R8 SPINDLE, 90-2780RPM, SARGON 612A-1 DRO, 2-HP, 220/440V 3PH	🔒 Subscribe
	BALDOR	100 HP 444T FRAME MOTOR	BALDOR 100 HP 444T FRAME MOTOR	🔒 Subscribe
	AEC		AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS	🔒 Subscribe
	BALDOR	100 HP 444T FRAME	BALDOR 100 HP 444T FRAME MOTOR	🔒 Subscribe
	BALDOR	100 HP 444T FRAME MOTOR	BALDOR 100 HP 444T FRAME MOTOR	🔒 Subscribe
	ACCURATE	2	ACCURATE 2 SCREW FEEDER AND CONTROL - ACCURATE APPROX 2" SCREW DIAMETER, RATED 600 KG/HR. W/ AGITATED HOPPER, WITH PREMIER HOPPER LOADER, WITH DIGITAL CONTROLLER. LAST FEEDING SIDE FEEDER ON TURN SCREW	🔒 Subscribe
	PORTA-COOL	PAC2K3633	PORTA-COOL PAC2K3633 36" 3 SPEED FAN	🔒 Subscribe
1984	ARBURG	305-210-700	1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APPROX. 17"X12-1/4" PLATEN, 12"X 5-1/4" BETWEEN TIE BARS, WITH OVERHEAD HOPPER, CONAIR VORTEC EX-150 ROBOT AND CONTROLLER S/N: 127122	🔒 Subscribe
1984	ARBURG	305-210-700	1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APPROX. 17"X12-1/4" PLATEN, 12"X5-1/4" BETWEEN TIE BARS, WITH OVERHEAD HOPPER, CONAIR VORTEC EX-150 ROBOT AND CONTROLLER (OUT OF SERVICE, PARTS MACHINE) S/N: 127137	🔒 Subscribe
	BALDOR	444T	BALDOR 444T 100 HP MOTOR	🔒 Subscribe
	HAPMAN	BAG DUMPING STATION	HAPMAN BAG DUMPING STATION C/S 40" W X 36" DEEP W/ DUST BLOWER AND FILTER W/ CONTROLS	🔒 Subscribe
	IMS		IMS BULK BIN STACKABLE QUANITY 10 - IMS CARBON STEEL BINS 43" X 43" X 20" ST. SIDE W/ 24" CONE STACKABLE 8 HAVE HINGED COVERS 2 NO COVERS QTY 10 TOTAL APPROX 1000 LB CAPACITY	🔒 Subscribe
	FRIEDRICH DECKEL	KF12	FRIEDRICH DECKEL KF12 UNIVERSAL COPY MILLING MACHINE 60-5000 RPM SPINDLE SPEED S/N: 3411	🔒 Subscribe
	FRIEDRICH DECKEL	GK12	FRIEDRICH DECKEL GK12 UNIVERSAL ENGRAVING AND COPY MILLING MACHINE 1600-20,000 RPM SPINDLE SPEED S/N: 2347	🔒 Subscribe
2003	K-TRON	SODER K2MVT60	2003 K-TRON SODER K2MVT60 TWIN SCREW FEEDER	🔒 Subscribe
			2-DOOR AND 1-DOOR STORAGE CABINETS WITH ASSORTED DECKEL PARTS, ACCESSORIES AND CLAMPS	🔒 Subscribe
	SOUTHWORTH	TILT 35	SOUTHWORTH TILT 35 TOTE TILTER. PORTABLE W/ CONTROL	🔒 Subscribe
			SPOOLS OF ELECTRICAL WIRE	🔒 Subscribe
	AEC		AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS	🔒 Subscribe
			PALLET ROTATING ASSEMBLY W/ FOOT SWITCH	🔒 Subscribe
	CUMBERLAND	8X12	CUMBERLAND 8X12 GRANULATOR 230V 3PH MODEL: 8X12 3KN S/N: 72150-85508	🔒 Subscribe

XALOY WRP12I

MISC

XALOY WRP12I HORIZONTAL WATER RING PELLETIZER SYSTEM. INCLUDES 60 HOLE DIE, 4 BLADE CUTTER ASSEMBLY,...

Hammer Price: 🔒

2011 LANTAI SHJ-72

PLASTICS PROCESSING EQUIPMENT

2011 LANTAI SHJ-72 72MM CO-ROTATING TWIN SCREEN EXTRUDER. 32:1 L/D, SIDE FEEDER, 325KW DRIVE (ITALY)...

Hammer Price: 🔒

ECC, INC. VALVE BAGGER SCREW FEEDER

PACKAGING EQUIPMENT

ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CA...

Hammer Price: 🔒

ECC, INC.

PACKAGING EQUIPMENT

ECC VALVE SCREW FEEDER BAGGER 50-150 LB CAP. - ECC, INC. VALVE BAGGER SCREW FEEDER 50 LB - 150 LB CA...

Hammer Price: 🔒

BERSTORFF/GALA TWS 120

MISC

BERSTORFF/GALA TWS 120 WATER RING PELLETIZING SYSTEM. 120 GPM TANK AND SPIN DRYER WITH CONTROLS. WAT...

Hammer Price: 🔒

YALE 6000 LB

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

YALE 6000 LB FORKLIFT WIDTH OVER LOAD TIRES: 44.5" BACK TILT: 5 STEER TIRES: SOLID MAX CAPACITY: 600...

Hammer Price: 🔒

CHAMPION 15X22

MISC

CHAMPION 15X22 HAMMERMILL...

Hammer Price: 🔒

1979 BERSTORFF ZE90

PLASTICS PROCESSING EQUIPMENT

1979 BERSTORFF ZE90 90MM CO ROTATING TWIN SCREW, 28/1 LD RATIO, 400 HP DC DRIVE - BERSTORFF MODEL ZE...

Hammer Price: 🔒

CONAIR EP-2-W30

REFRIGERATION EQUIPMENT

CONAIR EP-2-W30 30 TON PORTABLE CHILLER...

Hammer Price: 🔒

EMPRESS JMDT 312D

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

EMPRESS JMDT 312D MAX. 115 LB BAG LOADER. INCLUDES HOPPER AND FRAME. LAST RUNNING 50 LB BAG. FOOT CO...

Hammer Price: 🔒

2002 NISSEI TH60RE

PLASTICS PROCESSING EQUIPMENT

2002 NISSEI TH60RE 60 TON 1.1 OZ VERTICAL INJECTION MOLDING MACHINE S/N: T06W808 WITH AEC CHILLER MO...

Hammer Price: 🔒

HIGHLIGHT INDUSTRIES PREDATOR SS

PACKAGING EQUIPMENT

HIGHLIGHT INDUSTRIES PREDATOR SS PALLET STRETCH WRAPPER WITH ROTATING BASE, W/ CONTROLS...

Hammer Price: 🔒

KICE CKS-78 LH

DUST COLLECTION EQUIPMENT

KICE CKS-78 LH CYCLONE SYSTEM...

Hammer Price: 🔒

FEINMECHANIK MICHAEL DECKEL SO

METALWORKING & FABRICATION EQUIPMENT

FEINMECHANIK MICHAEL DECKEL SO SINGLE LIP CUTTER GRINDER WITH WORKBENCH AND CONTENTS S/N: 95-25881...

Hammer Price: 🔒

CINCINNATI MILACRON E50-D-375

PLASTICS PROCESSING EQUIPMENT

CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE SINGLE OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4...

Hammer Price: 🔒

ROCHELEAU TOOL & DIE R-4

PLASTICS PROCESSING EQUIPMENT

ROCHELEAU TOOL & DIE R-4 BLOW MOLDING MACHINE TOP AND BOTTOM INJECTION, WITH HOPPER, DME MFPIG HOT R...

Hammer Price: 🔒

ROCHELEAU R3S 1-1/2ACC

PLASTICS PROCESSING EQUIPMENT

ROCHELEAU R3S 1-1/2ACC BLOW MOLDING MACHINE TOP INJECTION, WITH CONAIR FRANKLIN QS01 ELECTRIC VACUUM...

Hammer Price: 🔒

CINCINNATI MILACRON E50-D-375

PLASTICS PROCESSING EQUIPMENT

CINCINNATI MILACRON E50-D-375 BLOW MOLDING MACHINE DUAL OVERHEAD INJECTION, APPROX. 22-1/4"X22-1/4" ...

Hammer Price: 🔒

TOYOTA FG-20

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOYOTA FG-20 2000-KG LP FORK TRUCK 2-STAGE MAST, 42" FORKS, PNEUMATIC TIRES, REBUILT ENGINE, RECENTL...

Hammer Price: 🔒

GOODWAY MACHINE CORP GW-1440

METALWORKING & FABRICATION EQUIPMENT

GOODWAY MACHINE CORP GW-1440 ENGINE LATHE 14" SWING, 40" BETWEEN CENTERS, 55-1800RPM, 1-1/2" HOLE TH...

Hammer Price: 🔒

WHITWORTH T-190

METALWORKING & FABRICATION EQUIPMENT

WHITWORTH T-190 ENGINE LATHE APPROX. 16" SWING, 56" BETWEEN CENTERS, 2" HOLE THROUGH SPINDLE, 40-200...

Hammer Price: 🔒

1992 GARDNER-DENVER EBERFD

AIR COMPRESSORS

1992 GARDNER-DENVER EBERFD AIR COMPRESSOR SN: M69006 COMPRESSOR MOTOR NOMINAL HP 25 230V, 60 HZ, PH ...

Hammer Price: 🔒

LAGUN REPUBLIC FT.1

CNC MACHINE CENTERS

LAGUN REPUBLIC FT.1 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE, 5" QUILL STROKE, R8 SPINDLE, 55...

Hammer Price: 🔒

EMI CORP. TCL-12-8-30

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

EMI CORP. TCL-12-8-30 INCLINE EXIT PART CONVEYORS...

Hammer Price: 🔒

KENT KGS-250AH

METALWORKING & FABRICATION EQUIPMENT

KENT KGS-250AH 8"X20" AUTOMATIC HYDRAULIC SURFACE GRINDER 8"X20" KANETSU ELECTROMAGNETIC CHUCK AND C...

Hammer Price: 🔒

MISC

32 HOLE STRAND DIE...

Hammer Price: 🔒

BALDOR 100 HP 444T

MISC

BALDOR 100 HP 444T FRAME MOTOR...

Hammer Price: 🔒

BALDOR 100 HP 444T

ELECTRICAL AND POWER GENERATION EQUIPMENT

BALDOR 100 HP 444T FRAME MOTOR...

Hammer Price: 🔒

PLASTICS PROCESSING EQUIPMENT

PLASTICS GRANULATOR 20 HP - GRANULATOR 20"X12" INLET, 20-HP, 460V...

Hammer Price: 🔒

1985 IPS YFTM-2

CNC MACHINE CENTERS

1985 IPS YFTM-2 VERTICAL MILLING MACHINE 42"X9" T-SLOTTED TABLE WITH SERVO TABLE AND SADDLE POWER FE...

Hammer Price: 🔒

BALDOR 100 HP 444T FRAME MOTOR

MISC

BALDOR 100 HP 444T FRAME MOTOR...

Hammer Price: 🔒

AEC

INDUSTRIAL AND COOLING HEATING EQUIPMENT

AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS...

Hammer Price: 🔒

BALDOR 100 HP 444T FRAME

ELECTRICAL AND POWER GENERATION EQUIPMENT

BALDOR 100 HP 444T FRAME MOTOR...

Hammer Price: 🔒

BALDOR 100 HP 444T FRAME MOTOR

MISC

BALDOR 100 HP 444T FRAME MOTOR...

Hammer Price: 🔒

ACCURATE 2

MISC

ACCURATE 2 SCREW FEEDER AND CONTROL - ACCURATE APPROX 2" SCREW DIAMETER, RATED 600 KG/HR. W/ AGITATE...

Hammer Price: 🔒

PORTA-COOL PAC2K3633

MISC

PORTA-COOL PAC2K3633 36" 3 SPEED FAN...

Hammer Price: 🔒

1984 ARBURG 305-210-700

PLASTICS PROCESSING EQUIPMENT

1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APP...

Hammer Price: 🔒

1984 ARBURG 305-210-700

PLASTICS PROCESSING EQUIPMENT

1984 ARBURG 305-210-700 INJECTION MOLDING MACHINE 700 KN CLAMPING FORCE, 145 KN INJECTION FORCE, APP...

Hammer Price: 🔒

BALDOR 444T

ELECTRICAL AND POWER GENERATION EQUIPMENT

BALDOR 444T 100 HP MOTOR...

Hammer Price: 🔒

HAPMAN BAG DUMPING STATION

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HAPMAN BAG DUMPING STATION C/S 40" W X 36" DEEP W/ DUST BLOWER AND FILTER W/ CONTROLS...

Hammer Price: 🔒

IMS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

IMS BULK BIN STACKABLE QUANITY 10 - IMS CARBON STEEL BINS 43" X 43" X 20" ST. SIDE W/ 24" CONE STACK...

Hammer Price: 🔒

FRIEDRICH DECKEL KF12

CNC MACHINE CENTERS

FRIEDRICH DECKEL KF12 UNIVERSAL COPY MILLING MACHINE 60-5000 RPM SPINDLE SPEED S/N: 3411...

Hammer Price: 🔒

FRIEDRICH DECKEL GK12

METALWORKING & FABRICATION EQUIPMENT

FRIEDRICH DECKEL GK12 UNIVERSAL ENGRAVING AND COPY MILLING MACHINE 1600-20,000 RPM SPINDLE SPEED S/N...

Hammer Price: 🔒

2003 K-TRON SODER K2MVT60

FOOD PROCESSING AND RESTAURANT EQUIPMENT

2003 K-TRON SODER K2MVT60 TWIN SCREW FEEDER...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2-DOOR AND 1-DOOR STORAGE CABINETS WITH ASSORTED DECKEL PARTS, ACCESSORIES AND CLAMPS...

Hammer Price: 🔒

SOUTHWORTH TILT 35

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH TILT 35 TOTE TILTER. PORTABLE W/ CONTROL...

Hammer Price: 🔒

ELECTRICAL AND POWER GENERATION EQUIPMENT

SPOOLS OF ELECTRICAL WIRE...

Hammer Price: 🔒

AEC

INDUSTRIAL AND COOLING HEATING EQUIPMENT

AEC AIR COOLED CHILLER AND TANK W/ PUMPS APPROX. 100 TON W/ CONTROLS...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

PALLET ROTATING ASSEMBLY W/ FOOT SWITCH...

Hammer Price: 🔒

CUMBERLAND 8X12

PLASTICS PROCESSING EQUIPMENT

CUMBERLAND 8X12 GRANULATOR 230V 3PH MODEL: 8X12 3KN S/N: 72150-85508...

Hammer Price: 🔒

1 2 3 4 5 6 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

MultiFacility Surplus Plastics Processing Equipment

Save to Project Folder

Print Options

Save to Project Folder