Aerospace Aeronautics Machine Tools Fluid Forming Presses Forming

American Auctioneers Group

Category: PRESSES & FORMING

Total Lots: 208

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 208 lots

Year	Make	Model	Lot Description	Hammer Price
	VERSON WHEELON	8600R-36-92	VERSON WHEELON MDL. 8600R-36-92 DIRECT ACTING HYDRAULIC FORMING PRESS W/ 8600 TON CAP, 5000 PSI FORMING PRESSURE, 36" X 92" TRAY SIZE S/N 20995 VERSON WHEELON · 8600R-36-92	🔒 Subscribe
	HARLEY	HP753	HARLEY HP753 RECEDING HEAD PIPE THREADER & CUTTING MACHINE W/ 8 1/8" THRU 13 3/8" PIPE THREAD RANGE, 4 1/2" THRU 8 5/8" AUXILLARY CHASER HOLDER RANGE, 4.5-13.3 RPM, 8-SPEEDS, FRONT AND REAR 39" 3-JAW CHUCKS W/ 15" THRU BORES, TAPER ATTACHMENT, CHAMFER TOOL IN CUTOFF BLOCK, HARD WAYS, COOLANT HARLEY · HP753	🔒 Subscribe
	L & F HUFFORD	A-5	12 TON CNC STRETCH WRAP FORMING MACHINE W/ DEMOTT CNC CONTROLS AND REMOTE HAND CONTROLS, 115" BETWEEN JAWS, 20" TENSION CYLINDER STROKE, 30" TENSION CYLINDER SWING L & F HUFFORD · A-5	🔒 Subscribe
	FARNHAM	1558-E	15' X 0.063" FORMING ROLL W/ 15' ROLL DIES, 0.625" MINIMUM FORM RADIUS, 1" DIA TOP ROLL AND 1.687" BOTTOM ROLLS, 2HP MOTOR S/N 10-40-9 FARNHAM · 1558-E	🔒 Subscribe
	FARNHAM	1510-E	19XX FARNHAM MDL. 1510-E 15' X 0.094" FORMING ROLL S/N 3-41-11 W/ 15' ROLL DIES, 1" MINUMUM FORM RADIUS, 1.625" DIA TOP AND BOTTOM ROLLS, 3HP MITOR FARNHAM · 1510-E	🔒 Subscribe
	HYSTER	S135XL	1999 HYSTER S135XL 13500 LB CAP LPG FORKLIFT S/N B024D04290T W/ 2-STAGE MAST, 134" LIFT HEIGHT, SIDE SHIFT, CUSHION TITES, 6' FORKS, 4' FORKS (6) PROPANE TANKS HYSTER · S135XL	🔒 Subscribe
	MARCHANT	4H	MARCHANT MDL. 4H HYDRAULIC SHRINKER / STRETCHER MACHINE S/N 19 W/ 4 INCH THROAT DEPTH, (1) SET OF NEW STIPPED JAWS, (2) SETS OF EXTRA STRETCHING JAWS MARCHANT · 4H	🔒 Subscribe
	FEELER	FTL-618E	FEELER FTL-618E WIDE BED TOOL ROOM LATHE S/N 711211 W/ ACU-RITE III DRO, 135-2955 RPM, INCH/MM THREADING, TAILSTOCK, STEADY REST, KDK TOOL POST, POWER FEEDS, 5C COLLET CLOSER, COOLANT FEELER · FTL-618E	🔒 Subscribe
	VICTOR	618EM	2000 VICTOR 618EM WIDE BED TOOL ROOM LATHE W/ SONY LH32 DRO, 130-3000 RPM, INCH/MM THREADING, TAILSTOCK, KDK TOOL POST, 5C COLLET CLOSER, POWER FEEDS, (2) 6" 3-JAW CHUCKS, 5C COLLETS VICTOR · 618EM	🔒 Subscribe
2012	KALAMAZOO CLAUSING	MS1318SA	2012 KALAMAZOO CLAUSING MS1318SA 13" HYDRAULIC MITER BAND SAW W/ KALAMAZOO CONTROLS, 3HP MOTOR HYDRAYULIC CLAMPING AND FEEDS, COOLANT S/N SH1012188 2012 · KALAMAZOO CLAUSING · MS1318SA	🔒 Subscribe
	ROTEX	18AK	ROTEX 18AK 18-STATION TURRET PUNCH PRESS W/ 1/8-1 3/4 INCH PUNCHES AND 2 INCH SHEAR STATION, ROLLING STAND ROTEX · 18AK	🔒 Subscribe
	DIACRO	NO. 18	18-STATION TURRET PUNCH PRESS W/ DIAL FENCE SYSTEM, STAND DIACRO · NO. 18	🔒 Subscribe
	GRAZIANO TORTONA	SAG 12	GRAZIANO TORTONA SAG 12 12 INCH X 30 INCH GEARED HEAD GAP BED LATHE W/ INCH/MM THREADING, TAILSTOCK, INDEXING TOOL POST 5C COLLET CLOSER, 6 INCH 3-JAW CHUCK GRAZIANO TORTONA · SAG 12	🔒 Subscribe
	MAX	30DVS	MAX MDL. 30DVS 30" DISC SANDER / SPINDLE SANDER COMBO W/ 5HP DISC MOTOR AND 1HP SPINDLE MOTORS MAX · 30DVS	🔒 Subscribe
2004	SOCO	HVS-375-FA-DR	2004 SOCO HVS-375-FA-DR AUTOMATIC CIRCULAR COLD SAW S/N 1004HVS375D79 W/ SOCO CONTROLS, 4.5 INCH ROUND, 4.33 INCH X 4.33 INCH SQUARE BAR CAP, 2-SPEEDS, 3/16 INCH TO 19 3/4 INCH CUT LENGTH CAP, CONVEYORS, COLLANT 2004 · SOCO · HVS-375-FA-DR	🔒 Subscribe
	CHICAGO	L-31	48 INCH FINGER BRAKE S/N 94938 CHICAGO · L-31	🔒 Subscribe
	WHITNEY-JENSES		6' BENDING BRAKE WHITNEY-JENSES	🔒 Subscribe
	ROTEX	18A55	18A55 18-STATION TURRET PUNCH W/ (17) PUNCH STATIONS (1) 2" SHEAR STATION, STAND ROTEX · 18A55	🔒 Subscribe
	REPUBLIC	14" X 40"	REPUBLIC 14" X 40" GEARED HEAD GAP BED LATHE W/ 35-2200 RPM, INCH/MM THREADING, TAILSTOCK, 8" 8-JAW CHUCK REPUBLIC · 14" X 40"	🔒 Subscribe
	SULLAIR	LS12-50H/A/SUL	50HP ROTARY AIR COMPRESSOR W/ SULLAIR CONTROLS, 24,350 HOURS, SULLAIR MDL. SR-500 REFRIGERATED AIR DRYER, PRECOOLER, INGERSOLL RAND OIL/WATER SEPERATOR, 120 GALLON AVERTICAL AIR STORAGE TANK SULLAIR · LS12-50H/A/SUL	🔒 Subscribe
	HARDINGE		HARDINGE TOOLING INCLUDING CUTOFF SLIDE, TURRET TOOL HOLDERS, BUSHINGS AND MISC HARDINGE	🔒 Subscribe
	ANTUQUE SMALL MACHINES INC	THE MASTER LATHE	ANTUQUE SMALL MACHINES INC "THE MASTER LATHE" MINIATURE JEWELERS LATHE (WORKING MODEL) W/ TOOLING KIT ANTUQUE SMALL MACHINES INC · THE MASTER LATHE	🔒 Subscribe
	BRIDGEPORT	DRO-2VA	BRIDGEPORT VERTICAL MILL W/ TOAUTO DRO-2VA PROGRAMMABLE DRO, 1HP MOTOR, 80-272- RPM, 8-SPEEDS, POWER FEED, 9" X 42" TABLE, R8 COLLET SET, 6" ANGLE-LOCK VISE W/ SWIVEL BASE, PHASE-2 5" 3-JAW ROTARY CHUCK, HARDINGE 5" 3-JAW DIVIDING CHUCK W/ MILL CENTER, MILL CLAMP SETS BRIDGEPORT · DRO-2VA	🔒 Subscribe
	SOCO	MC275-AC	SOCO MC275-AC 12" SEMI AUTOMATIC MITER COLD SAW WITH 2-SPEEDS, PNEUMATIC CLAMPING AND DOWN FEED, COOLANT, CONVEYORS S/N: 016MC275C03 SOCO · MC275-AC	🔒 Subscribe
	DAPRA	BIAX-SCRAPER	DAPRA BIAX-SCRAPER DAPRA · BIAX-SCRAPER	🔒 Subscribe
	LANDA	PHWS4-2000A	2000 PSI HEATED PRESSURE WASHER S/N P1101-95770 LANDA · PHWS4-2000A	🔒 Subscribe
	ATOM SPA	SE25L-T25	25 TON C-FRAME DIE CUTTING PRESS (CLICKER PRESS) WITH 19.7 INCH X 39 3/8 INCH BED AREA, 1 1/2 INCH TO 5 1/8 INCH ADJUSTABLE STROKE S/N: 23A113216 ATOM SPA · SE25L-T25	🔒 Subscribe
	DOALL	2013-20	20 INCH VERTICAL BAND SAW W/ BLADE WELDER, 0-5200 FPM, 26 INCH X 26 INCH MITER TABLE S/N: 377-81882 DOALL · 2013-20	🔒 Subscribe
1918	S.F. BOWSER & CO		1918 S.F. BOWSER & CO PORTABLE WHEELED SELF MEASURING OIL DISPENSING PUMP CART 1918 · S.F. BOWSER & CO	🔒 Subscribe
	PEHAKA	USF10R	40" VERTICAL BAND SAW W/ BLADE WELDER, 12-6600 FPM, 26 1/2" X 29 1/2" TABLE PEHAKA · USF10R	🔒 Subscribe
	BUCK	24	BUCK 24 4-JAW CHUCK W/ 10 1/2 INCH THRU BORE BUCK · 24	🔒 Subscribe
	CUSHMAN		CUSHMAN 21-INCH 3-JAW CHUCK W/ 9 1/2-INCH THRU BORE CUSHMAN	🔒 Subscribe
	MILLER	SYNCROWAVE 351	MILLER SYNCROWAVE 351 CC-AC/DC ARC WELDING POWER SOURCE W/ MILLER COLLMATE V3 COOLER AND CART MILLER · SYNCROWAVE 351	🔒 Subscribe
	MILLER	DELTAWELD 452	MILLER DELTAWELD 452 CV-DC ARC WELDING POWER SOURCE W/ MILLER 60 SERIES WIRE FEEDWE AND TWECO COLLER MILLER · DELTAWELD 452	🔒 Subscribe
	INGERSOLL RAND	T30	INGERSOLL RAND T30 5HP VERTICAL AIR COMPRESSOR W/ 2-STAGE PUMP, 80 GALLON TANK INGERSOLL RAND · T30	🔒 Subscribe
	INGERSOLL		INGERSOLL CHUCK JAWS (4) INGERSOLL	🔒 Subscribe
	DOALL	3612-3	36 INCH VERTICAL BAND SAW W/ BLADE WELDER, 25-6000 FPM, 3-SPEED GEAR BOX, 24 INCH X 30 1/2 INCH TABLE S/N: 153-701094 DOALL · 3612-3	🔒 Subscribe
			(2) 12" X 24" X 15" T-SLOT FIXTURE BLOCKS	🔒 Subscribe
	HONDA		BILLY GOAT GAS POWERED YARD VACUUM W/ HONDA ENGINE HONDA	🔒 Subscribe
			15" 4-JAW CHUCK, 10" 4-JAW CHUCK AND 12 1/2" MOUNTING PLATE	🔒 Subscribe
	ROTEX	R10-55	ROTEX R10-55 10-STATION PUNCH PRESS W/ 13/64" TO 2" PUNCHES, ROLLING STAND ROTEX · R10-55	🔒 Subscribe
			(2) BUCK 10-INCH 6-JAW CHUCK AND JACOBS SPEED CHUCK	🔒 Subscribe
			12" 3-JAW CHUCKS (3), 11" 3-JAW CHUCK, 12" 4-JAW CHUCKS (2), 8" 3-JAW CHUCKS (2), 18" AND 15" FACEPLATES (2) (10 TOTAL)	🔒 Subscribe
	BISON		BISON 8 INCH 3-JAW CHUCK BISON	🔒 Subscribe
	BOYAR SCHULTZ	2A	BOYAR SCHULTZ 2A 6 X 12 INCH AUTONATIC HYDRAULIC SURFACE GRINDER W/ 6 X 12 INCH MAGNETIC CHUCK, COOLANT BOYAR SCHULTZ · 2A	🔒 Subscribe
	KIRCHFIELD	TYPE FK	KIRCHFIELD TYPE FK SLIDING-TABLE TABLE SAW W/ 12" X 120" SLIDING TABLE 15 3/4" BLADE DIA, 11HP MOTOR, DUAL FENCE SYSTEMS KIRCHFIELD · TYPE FK	🔒 Subscribe
	KITAGAWA		17" 4-JAW CHUCK (NEW) AND 20" FACEPLATE (NEW) KITAGAWA	🔒 Subscribe
			HORIZONTAL MILL TAILSTOCK SUPPORT	🔒 Subscribe
			7" METAL CUTTING BAND SAW W/ MANUAL CLAMPING, WORK STOP, COOLANT	🔒 Subscribe
			SLIDING FENCES AND MISC MACHINE TOOLS	🔒 Subscribe

Year	Make	Model	Description	Price
	VERSON WHEELON	8600R-36-92	VERSON WHEELON MDL. 8600R-36-92 DIRECT ACTING HYDRAULIC FORMING PRESS W/ 8600 TON CAP, 5000 PSI FORMING PRESSURE, 36" X 92" TRAY SIZE S/N 20995	🔒 Subscribe
	HARLEY	HP753	HARLEY HP753 RECEDING HEAD PIPE THREADER & CUTTING MACHINE W/ 8 1/8" THRU 13 3/8" PIPE THREAD RANGE, 4 1/2" THRU 8 5/8" AUXILLARY CHASER HOLDER RANGE, 4.5-13.3 RPM, 8-SPEEDS, FRONT AND REAR 39" 3-JAW CHUCKS W/ 15" THRU BORES, TAPER ATTACHMENT, CHAMFER TOOL IN CUTOFF BLOCK, HARD WAYS, COOLANT	🔒 Subscribe
	L & F HUFFORD	A-5	12 TON CNC STRETCH WRAP FORMING MACHINE W/ DEMOTT CNC CONTROLS AND REMOTE HAND CONTROLS, 115" BETWEEN JAWS, 20" TENSION CYLINDER STROKE, 30" TENSION CYLINDER SWING	🔒 Subscribe
	FARNHAM	1558-E	15' X 0.063" FORMING ROLL W/ 15' ROLL DIES, 0.625" MINIMUM FORM RADIUS, 1" DIA TOP ROLL AND 1.687" BOTTOM ROLLS, 2HP MOTOR S/N 10-40-9	🔒 Subscribe
	FARNHAM	1510-E	19XX FARNHAM MDL. 1510-E 15' X 0.094" FORMING ROLL S/N 3-41-11 W/ 15' ROLL DIES, 1" MINUMUM FORM RADIUS, 1.625" DIA TOP AND BOTTOM ROLLS, 3HP MITOR	🔒 Subscribe
	HYSTER	S135XL	1999 HYSTER S135XL 13500 LB CAP LPG FORKLIFT S/N B024D04290T W/ 2-STAGE MAST, 134" LIFT HEIGHT, SIDE SHIFT, CUSHION TITES, 6' FORKS, 4' FORKS (6) PROPANE TANKS	🔒 Subscribe
	MARCHANT	4H	MARCHANT MDL. 4H HYDRAULIC SHRINKER / STRETCHER MACHINE S/N 19 W/ 4 INCH THROAT DEPTH, (1) SET OF NEW STIPPED JAWS, (2) SETS OF EXTRA STRETCHING JAWS	🔒 Subscribe
	FEELER	FTL-618E	FEELER FTL-618E WIDE BED TOOL ROOM LATHE S/N 711211 W/ ACU-RITE III DRO, 135-2955 RPM, INCH/MM THREADING, TAILSTOCK, STEADY REST, KDK TOOL POST, POWER FEEDS, 5C COLLET CLOSER, COOLANT	🔒 Subscribe
	VICTOR	618EM	2000 VICTOR 618EM WIDE BED TOOL ROOM LATHE W/ SONY LH32 DRO, 130-3000 RPM, INCH/MM THREADING, TAILSTOCK, KDK TOOL POST, 5C COLLET CLOSER, POWER FEEDS, (2) 6" 3-JAW CHUCKS, 5C COLLETS	🔒 Subscribe
2012	KALAMAZOO CLAUSING	MS1318SA	2012 KALAMAZOO CLAUSING MS1318SA 13" HYDRAULIC MITER BAND SAW W/ KALAMAZOO CONTROLS, 3HP MOTOR HYDRAYULIC CLAMPING AND FEEDS, COOLANT S/N SH1012188	🔒 Subscribe
	ROTEX	18AK	ROTEX 18AK 18-STATION TURRET PUNCH PRESS W/ 1/8-1 3/4 INCH PUNCHES AND 2 INCH SHEAR STATION, ROLLING STAND	🔒 Subscribe
	DIACRO	NO. 18	18-STATION TURRET PUNCH PRESS W/ DIAL FENCE SYSTEM, STAND	🔒 Subscribe
	GRAZIANO TORTONA	SAG 12	GRAZIANO TORTONA SAG 12 12 INCH X 30 INCH GEARED HEAD GAP BED LATHE W/ INCH/MM THREADING, TAILSTOCK, INDEXING TOOL POST 5C COLLET CLOSER, 6 INCH 3-JAW CHUCK	🔒 Subscribe
	MAX	30DVS	MAX MDL. 30DVS 30" DISC SANDER / SPINDLE SANDER COMBO W/ 5HP DISC MOTOR AND 1HP SPINDLE MOTORS	🔒 Subscribe
2004	SOCO	HVS-375-FA-DR	2004 SOCO HVS-375-FA-DR AUTOMATIC CIRCULAR COLD SAW S/N 1004HVS375D79 W/ SOCO CONTROLS, 4.5 INCH ROUND, 4.33 INCH X 4.33 INCH SQUARE BAR CAP, 2-SPEEDS, 3/16 INCH TO 19 3/4 INCH CUT LENGTH CAP, CONVEYORS, COLLANT	🔒 Subscribe
	CHICAGO	L-31	48 INCH FINGER BRAKE S/N 94938	🔒 Subscribe
	WHITNEY-JENSES		6' BENDING BRAKE	🔒 Subscribe
	ROTEX	18A55	18A55 18-STATION TURRET PUNCH W/ (17) PUNCH STATIONS (1) 2" SHEAR STATION, STAND	🔒 Subscribe
	REPUBLIC	14" X 40"	REPUBLIC 14" X 40" GEARED HEAD GAP BED LATHE W/ 35-2200 RPM, INCH/MM THREADING, TAILSTOCK, 8" 8-JAW CHUCK	🔒 Subscribe
	SULLAIR	LS12-50H/A/SUL	50HP ROTARY AIR COMPRESSOR W/ SULLAIR CONTROLS, 24,350 HOURS, SULLAIR MDL. SR-500 REFRIGERATED AIR DRYER, PRECOOLER, INGERSOLL RAND OIL/WATER SEPERATOR, 120 GALLON AVERTICAL AIR STORAGE TANK	🔒 Subscribe
	HARDINGE		HARDINGE TOOLING INCLUDING CUTOFF SLIDE, TURRET TOOL HOLDERS, BUSHINGS AND MISC	🔒 Subscribe
	ANTUQUE SMALL MACHINES INC	THE MASTER LATHE	ANTUQUE SMALL MACHINES INC "THE MASTER LATHE" MINIATURE JEWELERS LATHE (WORKING MODEL) W/ TOOLING KIT	🔒 Subscribe
	BRIDGEPORT	DRO-2VA	BRIDGEPORT VERTICAL MILL W/ TOAUTO DRO-2VA PROGRAMMABLE DRO, 1HP MOTOR, 80-272- RPM, 8-SPEEDS, POWER FEED, 9" X 42" TABLE, R8 COLLET SET, 6" ANGLE-LOCK VISE W/ SWIVEL BASE, PHASE-2 5" 3-JAW ROTARY CHUCK, HARDINGE 5" 3-JAW DIVIDING CHUCK W/ MILL CENTER, MILL CLAMP SETS	🔒 Subscribe
	SOCO	MC275-AC	SOCO MC275-AC 12" SEMI AUTOMATIC MITER COLD SAW WITH 2-SPEEDS, PNEUMATIC CLAMPING AND DOWN FEED, COOLANT, CONVEYORS S/N: 016MC275C03	🔒 Subscribe
	DAPRA	BIAX-SCRAPER	DAPRA BIAX-SCRAPER	🔒 Subscribe
	LANDA	PHWS4-2000A	2000 PSI HEATED PRESSURE WASHER S/N P1101-95770	🔒 Subscribe
	ATOM SPA	SE25L-T25	25 TON C-FRAME DIE CUTTING PRESS (CLICKER PRESS) WITH 19.7 INCH X 39 3/8 INCH BED AREA, 1 1/2 INCH TO 5 1/8 INCH ADJUSTABLE STROKE S/N: 23A113216	🔒 Subscribe
	DOALL	2013-20	20 INCH VERTICAL BAND SAW W/ BLADE WELDER, 0-5200 FPM, 26 INCH X 26 INCH MITER TABLE S/N: 377-81882	🔒 Subscribe
1918	S.F. BOWSER & CO		1918 S.F. BOWSER & CO PORTABLE WHEELED SELF MEASURING OIL DISPENSING PUMP CART	🔒 Subscribe
	PEHAKA	USF10R	40" VERTICAL BAND SAW W/ BLADE WELDER, 12-6600 FPM, 26 1/2" X 29 1/2" TABLE	🔒 Subscribe
	BUCK	24	BUCK 24 4-JAW CHUCK W/ 10 1/2 INCH THRU BORE	🔒 Subscribe
	CUSHMAN		CUSHMAN 21-INCH 3-JAW CHUCK W/ 9 1/2-INCH THRU BORE	🔒 Subscribe
	MILLER	SYNCROWAVE 351	MILLER SYNCROWAVE 351 CC-AC/DC ARC WELDING POWER SOURCE W/ MILLER COLLMATE V3 COOLER AND CART	🔒 Subscribe
	MILLER	DELTAWELD 452	MILLER DELTAWELD 452 CV-DC ARC WELDING POWER SOURCE W/ MILLER 60 SERIES WIRE FEEDWE AND TWECO COLLER	🔒 Subscribe
	INGERSOLL RAND	T30	INGERSOLL RAND T30 5HP VERTICAL AIR COMPRESSOR W/ 2-STAGE PUMP, 80 GALLON TANK	🔒 Subscribe
	INGERSOLL		INGERSOLL CHUCK JAWS (4)	🔒 Subscribe
	DOALL	3612-3	36 INCH VERTICAL BAND SAW W/ BLADE WELDER, 25-6000 FPM, 3-SPEED GEAR BOX, 24 INCH X 30 1/2 INCH TABLE S/N: 153-701094	🔒 Subscribe
			(2) 12" X 24" X 15" T-SLOT FIXTURE BLOCKS	🔒 Subscribe
	HONDA		BILLY GOAT GAS POWERED YARD VACUUM W/ HONDA ENGINE	🔒 Subscribe
			15" 4-JAW CHUCK, 10" 4-JAW CHUCK AND 12 1/2" MOUNTING PLATE	🔒 Subscribe
	ROTEX	R10-55	ROTEX R10-55 10-STATION PUNCH PRESS W/ 13/64" TO 2" PUNCHES, ROLLING STAND	🔒 Subscribe
			(2) BUCK 10-INCH 6-JAW CHUCK AND JACOBS SPEED CHUCK	🔒 Subscribe
			12" 3-JAW CHUCKS (3), 11" 3-JAW CHUCK, 12" 4-JAW CHUCKS (2), 8" 3-JAW CHUCKS (2), 18" AND 15" FACEPLATES (2) (10 TOTAL)	🔒 Subscribe
	BISON		BISON 8 INCH 3-JAW CHUCK	🔒 Subscribe
	BOYAR SCHULTZ	2A	BOYAR SCHULTZ 2A 6 X 12 INCH AUTONATIC HYDRAULIC SURFACE GRINDER W/ 6 X 12 INCH MAGNETIC CHUCK, COOLANT	🔒 Subscribe
	KIRCHFIELD	TYPE FK	KIRCHFIELD TYPE FK SLIDING-TABLE TABLE SAW W/ 12" X 120" SLIDING TABLE 15 3/4" BLADE DIA, 11HP MOTOR, DUAL FENCE SYSTEMS	🔒 Subscribe
	KITAGAWA		17" 4-JAW CHUCK (NEW) AND 20" FACEPLATE (NEW)	🔒 Subscribe
			HORIZONTAL MILL TAILSTOCK SUPPORT	🔒 Subscribe
			7" METAL CUTTING BAND SAW W/ MANUAL CLAMPING, WORK STOP, COOLANT	🔒 Subscribe
			SLIDING FENCES AND MISC MACHINE TOOLS	🔒 Subscribe

VERSON WHEELON 8600R-36-92

VERSON WHEELON MDL. 8600R-36-92 DIRECT ACTING HYDRAULIC FORMING PRESS W/ 8600 TON CAP, 5000 PSI FORM...

HARLEY HP753

HARLEY HP753 RECEDING HEAD PIPE THREADER & CUTTING MACHINE W/ 8 1/8" THRU 13 3/8" PIPE THREAD RANGE,...

L & F HUFFORD A-5

12 TON CNC STRETCH WRAP FORMING MACHINE W/ DEMOTT CNC CONTROLS AND REMOTE HAND CONTROLS, 115" BETWEE...

FARNHAM 1558-E

15' X 0.063" FORMING ROLL W/ 15' ROLL DIES, 0.625" MINIMUM FORM RADIUS, 1" DIA TOP ROLL AND 1.687" B...

FARNHAM 1510-E

19XX FARNHAM MDL. 1510-E 15' X 0.094" FORMING ROLL S/N 3-41-11 W/ 15' ROLL DIES, 1" MINUMUM FORM RAD...

HYSTER S135XL

1999 HYSTER S135XL 13500 LB CAP LPG FORKLIFT S/N B024D04290T W/ 2-STAGE MAST, 134" LIFT HEIGHT, SIDE...

MARCHANT 4H

MARCHANT MDL. 4H HYDRAULIC SHRINKER / STRETCHER MACHINE S/N 19 W/ 4 INCH THROAT DEPTH, (1) SET OF NE...

FEELER FTL-618E

FEELER FTL-618E WIDE BED TOOL ROOM LATHE S/N 711211 W/ ACU-RITE III DRO, 135-2955 RPM, INCH/MM THREA...

VICTOR 618EM

2000 VICTOR 618EM WIDE BED TOOL ROOM LATHE W/ SONY LH32 DRO, 130-3000 RPM, INCH/MM THREADING, TAILST...

2012 KALAMAZOO CLAUSING MS1318SA

2012 KALAMAZOO CLAUSING MS1318SA 13" HYDRAULIC MITER BAND SAW W/ KALAMAZOO CONTROLS, 3HP MOTOR HYDRA...

ROTEX 18AK

ROTEX 18AK 18-STATION TURRET PUNCH PRESS W/ 1/8-1 3/4 INCH PUNCHES AND 2 INCH SHEAR STATION, ROLLING...

DIACRO NO. 18

18-STATION TURRET PUNCH PRESS W/ DIAL FENCE SYSTEM, STAND...

GRAZIANO TORTONA SAG 12

GRAZIANO TORTONA SAG 12 12 INCH X 30 INCH GEARED HEAD GAP BED LATHE W/ INCH/MM THREADING, TAILSTOCK,...

MAX 30DVS

MAX MDL. 30DVS 30" DISC SANDER / SPINDLE SANDER COMBO W/ 5HP DISC MOTOR AND 1HP SPINDLE MOTORS...

2004 SOCO HVS-375-FA-DR

2004 SOCO HVS-375-FA-DR AUTOMATIC CIRCULAR COLD SAW S/N 1004HVS375D79 W/ SOCO CONTROLS, 4.5 INCH ROU...

CHICAGO L-31

48 INCH FINGER BRAKE S/N 94938...

WHITNEY-JENSES

6' BENDING BRAKE...

ROTEX 18A55

18A55 18-STATION TURRET PUNCH W/ (17) PUNCH STATIONS (1) 2" SHEAR STATION, STAND...

REPUBLIC 14" X 40"

REPUBLIC 14" X 40" GEARED HEAD GAP BED LATHE W/ 35-2200 RPM, INCH/MM THREADING, TAILSTOCK, 8" 8-JAW ...

SULLAIR LS12-50H/A/SUL

50HP ROTARY AIR COMPRESSOR W/ SULLAIR CONTROLS, 24,350 HOURS, SULLAIR MDL. SR-500 REFRIGERATED AIR D...

HARDINGE

HARDINGE TOOLING INCLUDING CUTOFF SLIDE, TURRET TOOL HOLDERS, BUSHINGS AND MISC...

ANTUQUE SMALL MACHINES INC THE MASTER LATHE

ANTUQUE SMALL MACHINES INC "THE MASTER LATHE" MINIATURE JEWELERS LATHE (WORKING MODEL) W/ TOOLING KI...

BRIDGEPORT DRO-2VA

BRIDGEPORT VERTICAL MILL W/ TOAUTO DRO-2VA PROGRAMMABLE DRO, 1HP MOTOR, 80-272- RPM, 8-SPEEDS, POWER...

SOCO MC275-AC

SOCO MC275-AC 12" SEMI AUTOMATIC MITER COLD SAW WITH 2-SPEEDS, PNEUMATIC CLAMPING AND DOWN FEED, COO...

DAPRA BIAX-SCRAPER

DAPRA BIAX-SCRAPER...

LANDA PHWS4-2000A

2000 PSI HEATED PRESSURE WASHER S/N P1101-95770...

ATOM SPA SE25L-T25

25 TON C-FRAME DIE CUTTING PRESS (CLICKER PRESS) WITH 19.7 INCH X 39 3/8 INCH BED AREA, 1 1/2 INCH T...

DOALL 2013-20

20 INCH VERTICAL BAND SAW W/ BLADE WELDER, 0-5200 FPM, 26 INCH X 26 INCH MITER TABLE S/N: 377-81882...

1918 S.F. BOWSER & CO

1918 S.F. BOWSER & CO PORTABLE WHEELED SELF MEASURING OIL DISPENSING PUMP CART...

PEHAKA USF10R

40" VERTICAL BAND SAW W/ BLADE WELDER, 12-6600 FPM, 26 1/2" X 29 1/2" TABLE...

BUCK 24

BUCK 24 4-JAW CHUCK W/ 10 1/2 INCH THRU BORE...

CUSHMAN

CUSHMAN 21-INCH 3-JAW CHUCK W/ 9 1/2-INCH THRU BORE...

MILLER SYNCROWAVE 351

MILLER SYNCROWAVE 351 CC-AC/DC ARC WELDING POWER SOURCE W/ MILLER COLLMATE V3 COOLER AND CART...

MILLER DELTAWELD 452

MILLER DELTAWELD 452 CV-DC ARC WELDING POWER SOURCE W/ MILLER 60 SERIES WIRE FEEDWE AND TWECO COLLER...

INGERSOLL RAND T30

INGERSOLL RAND T30 5HP VERTICAL AIR COMPRESSOR W/ 2-STAGE PUMP, 80 GALLON TANK...

INGERSOLL

INGERSOLL CHUCK JAWS (4)...

DOALL 3612-3

36 INCH VERTICAL BAND SAW W/ BLADE WELDER, 25-6000 FPM, 3-SPEED GEAR BOX, 24 INCH X 30 1/2 INCH TABL...

(2) 12" X 24" X 15" T-SLOT FIXTURE BLOCKS

HONDA

BILLY GOAT GAS POWERED YARD VACUUM W/ HONDA ENGINE...

15" 4-JAW CHUCK, 10" 4-JAW CHUCK AND 12 1/2" MOUNTING PLATE

ROTEX R10-55

ROTEX R10-55 10-STATION PUNCH PRESS W/ 13/64" TO 2" PUNCHES, ROLLING STAND...

(2) BUCK 10-INCH 6-JAW CHUCK AND JACOBS SPEED CHUCK

12" 3-JAW CHUCKS (3), 11" 3-JAW CHUCK, 12" 4-JAW CHUCKS (2), 8" 3-JAW CHUCKS (2), 18" AND 15" FACEPL

BISON

BISON 8 INCH 3-JAW CHUCK...

BOYAR SCHULTZ 2A

BOYAR SCHULTZ 2A 6 X 12 INCH AUTONATIC HYDRAULIC SURFACE GRINDER W/ 6 X 12 INCH MAGNETIC CHUCK, COOL...

KIRCHFIELD TYPE FK

KIRCHFIELD TYPE FK SLIDING-TABLE TABLE SAW W/ 12" X 120" SLIDING TABLE 15 3/4" BLADE DIA, 11HP MOTOR...

KITAGAWA

17" 4-JAW CHUCK (NEW) AND 20" FACEPLATE (NEW)...

HORIZONTAL MILL TAILSTOCK SUPPORT

7" METAL CUTTING BAND SAW W/ MANUAL CLAMPING, WORK STOP, COOLANT

SLIDING FENCES AND MISC MACHINE TOOLS

1 2 3 4 5 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Aerospace Aeronautics Machine Tools Fluid Forming Presses Forming

Save to Project Folder

Print Options